# Boeing Alert Service Bulletin 777-53A0093: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0263, the docket of AD 2021-18-09. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-53A0093](https://openairdocs.org/service-documents/boeing/777-53a0093.md)
- Title as filed: RB-777-53A0093-00--BOEING
- Pages: 121
- PDF: https://openairdocs.org/files/sha256/34/d4/34d4a83287f1246387fe2c6c7de63ac2a720d85d15cb2336cc9a90ca16ae8d33
- Page: https://openairdocs.org/service-documents/boeing/777-53a0093/file/34d4a83287f1

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-53A0093 RB
Original Issue: November 24, 2020
ATA System: 5350
SUBJECT: FUSELAGE - Section 45 - Sloping Pressure Deck Web Inspection and Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2020 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: November 24, 2020
777-53A0093 RB
1 of 121
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
2 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION [Group
1, Configuration 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION [Group
1, Configuration 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION [Group
2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION [Group
3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
REMOVAL [Group 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION [Group 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
FIGURE 7: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL FASTENER REMOVAL
[Group 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
FIGURE 8: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL BLIND FASTENER
INSTALLATION [Group 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
FIGURE 9: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL FASTENER ROW
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
FIGURE 10: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
REMOVAL [Group 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
FIGURE 11: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION [Group 1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
FIGURE 12: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
REMOVAL [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
FIGURE 13: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
FIGURE 14: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL FASTENER REMOVAL
[Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
FIGURE 15: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL BLIND FASTENER
INSTALLATION [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
FIGURE 16: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
REMOVAL [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
FIGURE 17: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION [Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
3 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
4 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-53A0093 RB
Original Issue: November 24, 2020
ATA System: 5350
SUBJECT: FUSELAGE - Section 45 - Sloping Pressure Deck Web Inspection and Repair
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line
number(s) 1-1566, 1568-1573, 1575-1580, 1582-1586, 1588-1604, 1606-1610, 1612-1614,
1616-1619, 1621-1623, 1625-1628, 1630-1632, 1634-1637, 1639-1641, 1643-1646, 1648-1650,
1652-1655, 1657-1658, 1660-1667, 1669, 1671, 1673, 1675-1676, 1678-1679, 1681, 1683-1684,
1686-1687, 1689-9999 in 3 Group(s). Where the effectivity is presented with hyphens between
line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9
means line numbers 1 through 9 inclusive.
NOTE: The Variable Number table below includes all affected airplanes up to Line Number 1701.
Affected airplanes after Line Number 1701 will be added to the service bulletin's
MyBoeingFleet.com (MBF) "get effectivity" result when they are added to the MBF Fleet
Profile Page.
DESCRIPTIONCONFIGURATIONGROUP
777-200 Airplanes, line numbers 1 through 93.- 1
777-200 Airplanes that have accomplished all preventive modifications
at the sloping pressure deck in accordance with Service Bulletin
777-53-0004.
1
777-200 Airplanes that have not accomplished all preventive
modifications at the sloping pressure deck in accordance with Service
Bulletin 777-53-0004.
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
5 of 121

### Page 6

DESCRIPTIONCONFIGURATIONGROUP
777-200, line numbers 94 through 1117 and 777-200LR/-300/-300ER
Airplanes.
- 2
777F Airplanes.- 3
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA090
2WA091 - WA093
1WA101 - WA104
1WA116 - WA119
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
1WA206 - WA207
2WA208 - WA212
1WA221 - WA222
2WA223
2WA231 - WA232
2WA241 - WA250
2WA261 - WA266
2WA281 - WA283
2WA301 - WA304
1WB001 - WB009
2WB010 - WB021
2WB031 - WB046
1WB051 - WB060
2WB061 - WB088
1WB101 - WB104
GroupVariable Number
2WB105 - WB106
1WB121 - WB122
2WB123 - WB125
1WB131 - WB132
2WB133 - WB148
1WB151 - WB153
2WB154 - WB155
1WB161 - WB164
2WB165 - WB177
1WB181 - WB184
2WB185 - WB194
2WB201 - WB215
2WB231 - WB247
1WB271
2WB272 - WB273
2WB276 - WB286
2WB291 - WB302
2WB306 - WB307
2WB311 - WB337
2WB341 - WB342
2WB366 - WB368
2WB371 - WB388
2WB406
2WB411 - WB413
GroupVariable Number
2WB416 - WB439
2WB446 - WB453
2WB476
2WB481 - WB484
2WB501 - WB512
2WB531 - WB537
2WB551 - WB554
2WB591 - WB597
2WB601 - WB606
2WB611 - WB622
2WB631 - WB638
2WB646 - WB649
2WC051 - WC073
2WC101 - WC104
2WC111 - WC120
2WC221 - WC224
2WC241 - WC243
2WC281 - WC290
2WC301 - WC308
2WC361 - WC364
2WC371 - WC374
2WC381 - WC395
2WC441
2WC446 - WC449
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
6 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 7

GroupVariable Number
2WC456 - WC459
2WC486 - WC493
2WC506 - WC508
2WC521 - WC522
2WC531 - WC536
2WC546 - WC548
2WC556
2WC566 - WC567
2WC571 - WC574
2WC581
2WC586 - WC587
2WC591 - WC595
2WD001 - WD002
2WD011 - WD018
2WD031 - WD036
2WD046 - WD055
2WD066 - WD075
2WD081 - WD089
2WD091
2WD096
2WD101 - WD106
2WD111 - WD112
2WD116 - WD117
2WD121 - WD123
2WD156
2WD501 - WD513
2WD521 - WD541
2WD546 - WD554
2WD561 - WD573
2WD581 - WD599
2WD606 - WD609
2WD621 - WD632
2WD651 - WD665
GroupVariable Number
2WD671 - WD677
2WD691 - WD709
2WD741 - WD752
2WD761 - WD771
2WD786 - WD788
2WD796 - WD837
2WD846 - WD867
2WD871 - WD918
2WD921 - WD957
2WD966 - WD970
2WD981 - WD982
2WD986 - WD987
2WD991 - WD996
2WE001 - WE007
2WE011 - WE012
2WE021 - WE026
2WE031 - WE040
2WE051 - WE057
2WE071 - WE078
2WE081 - WE084
2WE091 - WE095
2WE126 - WE178
2WE186 - WE219
2WE226 - WE231
2WE236 - WE253
2WE261 - WE267
2WE271 - WE278
2WE291 - WE298
2WE301 - WE320
2WE331 - WE356
2WE366 - WE368
2WE376 - WE377
2WE381
GroupVariable Number
2WE386 - WE387
2WE391 - WE392
2WE396 - WE411
2WE416 - WE420
2WE426 - WE431
2WE436 - WE446
2WE451 - WE484
2WE486 - WE493
2WE495 - WE499
2WE501 - WE504
2WE511 - WE516
2WE526 - WE528
2WE536 - WE549
2WE556 - WE573
2WE576 - WE587
2WE591
2WE601 - WE605
2WE626 - WE627
2WE631
2WE641 - WE642
2WE646 - WE647
2WE651 - WE661
2WE666 - WE677
2WE681 - WE689
2WE701 - WE705
2WE711 - WE712
2WE731 - WE732
2WE736 - WE740
2WE746 - WE772
2WE776 - WE786
2WE791 - WE792
2WE796 - WE798
2WE801 - WE806
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
7 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 8

GroupVariable Number
2WE811 - WE812
2WE826 - WE828
2WE831 - WE835
2WE851 - WE853
2WE856 - WE857
2WE861 - WE863
2WE866 - WE868
2WE871
3WF001 - WF004
3WF016 - WF029
3WF031 - WF043
3WF046 - WF077
GroupVariable Number
3WF081 - WF088
3WF096 - WF101
3WF106 - WF109
3WF111 - WF124
3WF131 - WF144
3WF146 - WF147
3WF151 - WF152
3WF156 - WF173
3WF176 - WF184
3WF191
3WF201
3WF206 - WF217
GroupVariable Number
3WF221 - WF225
3WF231 - WF248
3WF256 - WF258
3WF261 - WF262
3WF266 - WF279
3WF281 - WF288
3WF296
3WF301 - WF302
3WF311 - WF313
3WF321
--
--
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 777-53A0093 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 777-53A0093 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1, in accordance with
Accomplishment Instructions.
Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 16
months after
the Original Is-
sue date of
777-53A0093
RB.
Before 7,500 to-
tal flight cycles
or 32,000 total
flight hours
whichever oc-
curs first.
Do a detailed inspection of
the left and right side slop-
ing pressure deck web from
STA 1245 to STA 1287 for
any damaged solid rivet.
All airplanes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
8 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 9

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-Repeat the detailed inspec-
tion of the left and right side
sloping pressure deck web
from STA 1245 to STA
1287 for any damaged solid
rivet.
CONDITION 1:
NO DAMAGED SOLID
RIVET FOUND.
-Before further flight.OPTION 1 (ACTION 1):CONDITION 2:
Replace all solid rivets
within the affected fastener
row with solid rivets.
FOUND AT LEAST 1 BUT
NO MORE THAN 9 DAM-
AGED SOLID RIVET(S)
ON THE SAME FASTEN-
ER ROW WITHIN THE
SAME STIFFENER.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-OPTION 1 (ACTION 2):
Repeat the detailed inspec-
tion of the left and right side
sloping pressure deck web
from STA 1245 to STA
1287 for any damaged solid
rivet. (b)
-Before further flight.OPTION 2 (ACTION 1):
Replace any damaged solid
rivet(s) with blind fasten-
er(s). (a)
-Within 1,000 flight cycles or
4,200 flight hours, whichever
occurs first after blind fastener
installation.
OPTION 2 (ACTION 2):
Do a detailed inspection of
two rows of blind fastener(s)
and solid rivets common to
the affected stiffener for any
damaged solid rivet or any
damaged blind fastener.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
9 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 10

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
1,000 flight cycles
or 4,200 flight
hours whichever
occurs first.
-ACTION 1: Repeat detailed
inspection of two rows of
blind fastener(s) and solid
rivets common to the affect-
ed stiffener for any dam-
aged solid rivet or any
damaged blind fastener.
CONDITION 2.1:
NO DAMAGED SOLID
RIVET OR DAMAGED
BLIND FASTENER
FOUND.
-Within 4,000 flight cycles or
16,800 flight hours, whichever
occurs first after the initial blind
fastener installation.
ACTION 2: Within the affect-
ed fastener row, replace all
blind fastener(s) and solid
rivets with solid rivets.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-ACTION 3: Repeat the de-
tailed inspection of the left
and right side sloping pres-
sure deck web from STA
1245 to STA 1287 for any
damaged solid rivet. (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
10 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 11

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.OPTION 1 (ACTION 1):CONDITION 2.2:
Within the affected fastener
row, replace all blind fasten-
er(s) and solid rivets with
solid rivets.
FOUND ANY COMBINA-
TION OF, AT LEAST 1
BUT NO MORE THAN 9,
DAMAGED SOLID RIV-
ET(S) OR DAMAGED
BLIND FASTENER(S)
AND THE CUMULATIVE
TOTAL OF BLIND FAS-
TENERS INSTALLED
DOES NOT EXCEED A
MAXIMUM OF 9 ON THE
SAME FASTENER ROW
WITHIN THE SAME
STIFFENER.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-OPTION 1 (ACTION 2):
Repeat the detailed inspec-
tion of the left and right side
sloping pressure deck web
from STA 1245 to STA
1287 for any damaged solid
rivet. (b)
-Before further flight.OPTION 2 (ACTION 1):
Replace any damaged solid
rivet(s) or damaged blind
fastener(s) with blind fasten-
er(s). (a)
1,000 flight cycles
or 4,200 flight
hours whichever
occurs first.
-OPTION 2 (ACTION 2):
Repeat detailed inspection
of two rows of blind fasten-
er(s) and solid rivets com-
mon to the affected stiffener
for any damaged solid rivet
or any damaged blind fas-
tener.
-Within 4,000 flight cycles or
16,800 flight hours, whichever
occurs first after the initial blind
fastener installation.
OPTION 2 (ACTION 3):
Within the affected fastener
row, replace all blind fasten-
er(s) and solid rivets with
solid rivets.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-OPTION 2 (ACTION 4):
Repeat the detailed inspec-
tion of the left and right side
sloping pressure deck web
from STA 1245 to STA
1287 for any damaged solid
rivet. (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
11 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 12

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.ACTION 1: Within the affect-
ed stiffener, replace all blind
fastener(s) and solid rivets
with solid rivets.
CONDITION 2.3:
FOUND ANY COMBINA-
TION OF 10 OR MORE
DAMAGED SOLID RIV-
ET(S) OR DAMAGED
BLIND FASTENER(S) OR
THE CUMULATIVE TOTAL
OF BLIND FASTENERS
EXCEEDS A MAXIMUM
OF 9 INSTALLED ON THE
SAME FASTENER ROW
WITHIN THE SAME
STIFFENER.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-ACTION 2: Repeat the de-
tailed inspection of the left
and right side sloping pres-
sure deck web from STA
1245 to STA 1287 for any
damaged solid rivet. (b)
-Before further flight.ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 2.4:
FOUND ANY COMBINA-
TION OF DAMAGED SOL-
ID RIVET(S) OR DAM-
AGED BLIND FASTEN-
ER(S) ON BOTH FASTEN-
ER ROWS WITHIN THE
SAME STIFFENER.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-ACTION 2: Repeat the de-
tailed inspection of the left
and right side sloping pres-
sure deck web from STA
1245 to STA 1287 for any
damaged solid rivet. (b)
-Before further flight.ACTION 1: Replace all solid
rivets on the affected stiffen-
er with solid rivets.
CONDITION 3:
FOUND 10 OR MORE
DAMAGED SOLID RIVETS
ON THE SAME FASTEN-
ER ROW WITHIN THE
SAME STIFFENER.
4,000 flight cycles
or 16,800 flight
hours whichever
occurs first.
-ACTION 2: Repeat the de-
tailed inspection of the left
and right side sloping pres-
sure deck web from STA
1245 to STA 1287 for any
damaged solid rivet. (b)
-Before further flight.ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 4:
FOUND ANY DAMAGED
SOLID RIVET(S) ON
BOTH FASTENER ROWS
WITHIN THE SAME
STIFFENER. 4,000 flight cyclesor 16,800 flight
hours whichever
occurs first.
-ACTION 2: Repeat the de-
tailed inspection of the left
and right side sloping pres-
sure deck web from STA
1245 to STA 1287 for any
damaged solid rivet. (b)
(a) Cumulative damage cannot exceed 9 locations for the blind fastener installation on the same fastener
row.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
12 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 13

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(b) It is not required to do the detailed inspection in areas where a repair uses fastener(s) not identified in
Requirements Bulletin 777-53A0093 provided all of the following conditions are met:
1. The repair is the corrective action to the damaged solid rivet condition identified in Requirements
Bulletin 777-53A0093 and installed after the original issue date of Requirements Bulletin 777-
53A0093, AND
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
13 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 14

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
14 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT
BLANK PAGE

### Page 15

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 777-SL-51-013, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
15 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 16

6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation or assembly to detect damage, failure or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
12. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
13. Damage is defined as any solid rivet missing a solid rivet head, any cracked solid
rivet, any deformed solid rivet, or any gap between solid rivet head and the sloping
pressure deck web surface. Refer to 777-200 SRM 51-40-02, 777-300 SRM 51-40-02
and 777F SRM 51-40-02 for gap allowance.
B. WORK INSTRUCTIONS
Actions Required For Compliance
1. Requirements
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
16 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 17

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Do PART 1: OPEN
EXTERNAL ACCESS.
-Do a detailed inspection of the
left and right side sloping pres-
sure deck web from STA 1245
to STA 1287 for any damaged
solid rivet.
All airplanes.
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Do PART 3: CLOSE
EXTERNAL ACCESS.
--CONDITION 1:
NO DAMAGED SOLID
RIVET FOUND. Do PART 1: OPEN
EXTERNAL ACCESS.
-Repeat the detailed inspection
of the left and right side sloping
pressure deck web from STA
1245 to STA 1287 for any dam-
aged solid rivet.
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
17 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 18

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Do PART 2: OPEN IN-
TERNAL ACCESS.
-OPTION 1 (ACTION 1):
Replace all solid rivets within
the affected fastener row with
solid rivets.
CONDITION 2:
FOUND AT LEAST 1
BUT NO MORE THAN
9 DAMAGED SOLID
RIVET(S) ON THE
SAME FASTENER
ROW WITHIN THE
SAME STIFFENER.
-Group 1-2: FIGURE 5 and
FIGURE 6
Group 3: FIGURE 12 and
FIGURE 13
Do PART 4: CLOSE
INTERNAL ACCESS
-
and
Do PART 3: CLOSE
EXTERNAL ACCESS.
Do PART 1: OPEN
EXTERNAL ACCESS.
-OPTION 1 (ACTION 2):
Repeat the detailed inspection
of the left and right side sloping
pressure deck web from STA
1245 to STA 1287 for any dam-
aged solid rivet. (b)
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
-Group 1-2: FIGURE 7 and
FIGURE 8
OPTION 2 (ACTION 1):
Replace any damaged solid riv-
et(s) with blind fastener(s). (a) Group 3: FIGURE 14 and
FIGURE 15
Do PART 3: CLOSE
EXTERNAL ACCESS.
-
Do PART 1: OPEN
EXTERNAL ACCESS.
-OPTION 2 (ACTION 2):
Do a detailed inspection of two
rows of blind fastener(s) and
solid rivets common to the affect-
ed stiffener for any damaged
solid rivet or any damaged blind
fastener.
Do PART 5: PREPA-
RATION.
-FIGURE 9
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
18 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 19

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Do PART 3: CLOSE
EXTERNAL ACCESS.
--CONDITION 2.1:
NO DAMAGED SOLID
RIVET OR DAMAGED
BLIND FASTENER
FOUND.
Do PART 1: OPEN
EXTERNAL ACCESS.
Do PART 5: PREPA-
RATION.
-ACTION 1: Repeat detailed in-
spection of two rows of blind
fastener(s) and solid rivets
common to the affected stiffener
for any damaged solid rivet or
any damaged blind fastener. -FIGURE 9
Do PART 2: OPEN IN-
TERNAL ACCESS.
-ACTION 2: Within the affected
fastener row, replace all blind
fastener(s) and solid rivets with
solid rivets. -Group 1-2: FIGURE 5 andFIGURE 6
Group 3: FIGURE 12 and
FIGURE 13
Do PART 4: CLOSE
INTERNAL ACCESS
-
and
Do PART 3: CLOSE
EXTERNAL ACCESS.
Do PART 1: OPEN
EXTERNAL ACCESS.
-ACTION 3: Repeat the detailed
inspection of the left and right
side sloping pressure deck web
from STA 1245 to STA 1287 for
any damaged solid rivet. (b)
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
19 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 20

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Do PART 2: OPEN IN-
TERNAL ACCESS.
-OPTION 1 (ACTION 1):
Within the affected fastener row,
replace all blind fastener(s) and
solid rivets with solid rivets.
CONDITION 2.2:
FOUND ANY COMBI-
NATION OF, AT
LEAST 1 BUT NO
MORE THAN 9, DAM-
AGED SOLID RIV-
ET(S) OR DAMAGED
BLIND FASTENER(S)
AND THE CUMULA-
TIVE TOTAL OF BLIND
FASTENERS IN-
STALLED DOES NOT
EXCEED A MAXIMUM
OF 9 ON THE SAME
FASTENER ROW
WITHIN THE SAME
STIFFENER.
-Group 1-2: FIGURE 5 and
FIGURE 6
Group 3: FIGURE 12 and
FIGURE 13
Do PART 4: CLOSE
INTERNAL ACCESS
and
Do PART 3: CLOSE
EXTERNAL ACCESS.
-
Do PART 1: OPEN
EXTERNAL ACCESS.
Do PART 5: PREPA-
RATION.
-OPTION 1 (ACTION 2):
Repeat the detailed inspection
of the left and right side sloping
pressure deck web from STA
1245 to STA 1287 for any dam-
aged solid rivet. (b) -Group 1, Configuration 1:FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
-Group 1-2: FIGURE 7 and
FIGURE 8
OPTION 2 (ACTION 1):
Replace any damaged solid riv-
et(s) or damaged blind fasten-
er(s) with blind fastener(s). (a)
Group 3: FIGURE 14 and
FIGURE 15
Do PART 3: CLOSE
EXTERNAL ACCESS.
-
Do PART 1: OPEN
EXTERNAL ACCESS.
-OPTION 2 (ACTION 2):
Repeat detailed inspection of
two rows of fasteners (blind
fastener(s) and solid rivets only)
common to the affected stiffener
for any damaged solid rivet or
any damaged blind fastener.
Do PART 5: PREPA-
RATION.
-FIGURE 9
Do PART 2: OPEN IN-
TERNAL ACCESS.
-OPTION 2 (ACTION 3):
Within the affected fastener row,
replace all blind fastener(s) and
solid rivets with solid rivets. -Group 1-2: FIGURE 5 andFIGURE 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
20 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 21

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Group 3: FIGURE 12 and
FIGURE 13
Do PART 4: CLOSE
INTERNAL ACCESS
-
and
Do PART 3: CLOSE
EXTERNAL ACCESS.
Do PART 1: OPEN
EXTERNAL ACCESS.
-OPTION 2 (ACTION 4):
Repeat the detailed inspection
of the left and right side sloping
pressure deck web from STA
1245 to STA 1287 for any dam-
aged solid rivet. (b)
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Do PART 2: OPEN IN-
TERNAL ACCESS.
-ACTION 1: Within the affected
stiffener, replace all blind fasten-
er(s) and solid rivets with solid
rivets.
CONDITION 2.3:
FOUND ANY COMBI-
NATION OF 10 OR
MORE DAMAGED
SOLID RIVET(S) OR
DAMAGED BLIND
FASTENER(S) OR
THE CUMULATIVE
TOTAL OF BLIND
FASTENERS EX-
CEEDS A MAXIMUM
OF 9 INSTALLED ON
THE SAME FASTEN-
ER ROW WITHIN THE
SAME STIFFENER.
-Group 1-2: FIGURE 10 and
FIGURE 11
Group 3: FIGURE 16 and
FIGURE 17
Do PART 4: CLOSE
INTERNAL ACCESS
and
Do PART 3: CLOSE
EXTERNAL ACCESS.
-
Do PART 1: OPEN
EXTERNAL ACCESS.
Do PART 5: PREPA-
RATION.
-ACTION 2: Repeat the detailed
inspection of the left and right
side sloping pressure deck web
from STA 1245 to STA 1287 for
any damaged solid rivet. (b) -Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
21 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 22

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Do PART 2: OPEN IN-
TERNAL ACCESS.
-ACTION 1: Contact The Boeing
Company for repair instructions
and do the repair.
CONDITION 2.4:
FOUND ANY COMBI-
NATION OF DAM-
AGED SOLID RIV-
ET(S) OR DAMAGED
BLIND FASTENER(S)
ON BOTH FASTENER
ROWS WITHIN THE
SAME STIFFENER.
and
Do PART 3: CLOSE
EXTERNAL ACCESS
and
Do PART 4: CLOSE
INTERNAL ACCESS
Do PART 1: OPEN
EXTERNAL ACCESS.
-ACTION 2: Repeat the detailed
inspection of the left and right
side sloping pressure deck web
from STA 1245 to STA 1287 for
any damaged solid rivet. (b)
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Do PART 2: OPEN IN-
TERNAL ACCESS.
-ACTION 1: Replace all solid
rivets on the affected stiffener
with solid rivets.
CONDITION 3:
FOUND 10 OR MORE
DAMAGED SOLID
RIVETS ON THE
SAME FASTENER
ROW WITHIN THE
SAME STIFFENER.
-Group 1-2: FIGURE 10 and
FIGURE 11
Group 3: FIGURE 16 and
FIGURE 17
Do PART 4: CLOSE
INTERNAL ACCESS
-
and
Do PART 3: CLOSE
EXTERNAL ACCESS.
Do PART 1: OPEN
EXTERNAL ACCESS.
-ACTION 2: Repeat the detailed
inspection of the left and right
side sloping pressure deck web
from STA 1245 to STA 1287 for
any damaged solid rivet. (b)
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
22 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 23

Table 1: Detailed Inspection of the Sloping Pressure Deck Web from STA 1245 to STA 1287
Refer to the listed
procedures in SB
777-53A0093 Original
Issue or later ap-
proved revisions as
an accepted proce-
dure.
Method of ComplianceActionCondition
Do PART 2: OPEN IN-
TERNAL ACCESS.
-ACTION 1: Contact The Boeing
Company for repair instructions
and do the repair.
CONDITION 4:
FOUND ANY DAM-
AGED SOLID RIV-
ET(S) ON BOTH FAS-
TENER ROWS WITHIN
THE SAME STIFFEN-
ER.
and
Do PART 3: CLOSE
EXTERNAL ACCESS
and
Do PART 4: CLOSE
INTERNAL ACCESS
Do PART 1: OPEN
EXTERNAL ACCESS.
-ACTION 2: Repeat the detailed
inspection of the left and right
side sloping pressure deck web
from STA 1245 to STA 1287 for
any damaged solid rivet. (b)
Do PART 5: PREPA-
RATION.
-Group 1, Configuration 1:
FIGURE 1
Group 1, Configuration 2:
FIGURE 2
Group 2: FIGURE 3
Group 3: FIGURE 4
(a) Cumulative damage cannot exceed 9 locations for the blind fastener installation on the same fastener
row.
(b) It is not required to do the detailed inspection in areas where a repair uses fastener(s) not identified in
Requirements Bulletin 777-53A0093 provided all of the following conditions are met:
1. The repair is the corrective action to the damaged solid rivet condition identified in Requirements
Bulletin 777-53A0093 and installed after the Original Issue date of Requirements Bulletin 777-
53A0093, AND
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA)
via a FAA Form 8100-9.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
23 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 24 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 1, Configuration 1.
RBL
88.7
BL O
LBL
88.7
STA
1308
STA
1287
SLOPING PRESSURE DECK
STA
1245
087 L 483 257  25.746.3  RBL  RBL
65  88.7
_ STA
1287
STA
1245
VIEW LOOKING UP
(TYPICAL)  2937768
A-A
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 1 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0093 RB
Work - See page 1 for details.  24 of 121

### Page 25 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  I LBL  LBL  46.3
88.7  81.3  74  65  59  53
STA
1287
STA
VIEW LOOKING UP
DETAILED INSPECTION  2937811
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 2 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  25 of 121

### Page 26 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
46.3  LBL  39.7  LBL  LBL  33  25.7  LBL  18.3  LBL  LBL  5.5  BL
STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2937997
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 3 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  26 of 121

### Page 27 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
BL  RBL  RBL  RBL  RBL  RBL  RBL
5.5  11  18.3  33  39.7  46.3  STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938016
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 4 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  27 of 121

### Page 28 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
RBL  RBL  RBL  RBL  RBL  RBL  RBL
46.3  53  59  65  74  81.3  88.7  STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938021
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 5 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  28 of 121

### Page 29

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)(b) --SOLID RIVETInspect1
(a) Do a detailed inspection of the sloping pressure deck web solid rivets common to the stiffeners from STA
1245 to STA 1287, Left Buttock Line (LBL) 59 to LBL 5.5 and Right Buttock LIne (RBL) 88.7 to RBL 5.5
for any damaged solid rivet.
(b) Tactile assessment on the manufacture solid rivet head is required when doing the detailed inspection.
FIGURE 1: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
29 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 30 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 1, Configuration 2.
RBL
88
BL O
LBL
88.7
NEWD  STA  1308
STA
1287 A
SLOPING PRESSURE DECK
STA
1245
LBL  88  25.7 46.3  RBL  RBL  65  88.7  RBL
_ STA
1287
STA
1245
VIEW LOOKING UP  (TYPICAL)  2938139
A-A
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 1 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0093 RB
Work - See page 1 for details.  30 of 121

### Page 31 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  LBL  LBL
88  81.3  65  59  53  46.3
STA
1287
_ STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938140
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 2 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  31 of 121

### Page 32 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  LBL  LBL
46.3  39.7  33  25.7  18.3  5.5
STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 3 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  32 of 121

### Page 33 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
RBL  RBL  RBL  RBL  RBL  RBL  RBL
5.5  11  18.3  25.7  33  39.7  46.3  STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 4 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  33 of 121

### Page 34 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
RBL  RBL  RBL  RBL  RBL  RBL  RBL
46.3  53  59  65  74  81.3  88.7  STA
1287
J
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 5 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  34 of 121

### Page 35

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)(b)(c)--SOLID RIVETInspect1
(a) Refer to Boeing Service Bulletin 777-53-0004 for all preventative modifications of the sloping pressure
deck.
(b) Do a detailed inspection of the sloping pressure deck web solid rivets common to the stiffeners from STA
1245 to STA 1287, LBL 88 to LBL 5.5 and RBL 88.7 to RBL 5.5 for any damaged solid rivet.
(c) Tactile assessment on the manufacture solid rivet head is required when doing the detailed inspection.
FIGURE 2: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
35 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 36 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 2.
RBL
88.7
BL O
LBL
88.7
NEWD  STA  1308
STA
1287 A
SLOPING PRESSURE DECK
STA
1245
LE 463 257  BL  RBL  RBL  RBL  RBL
88.7  25.7  46.3  65  88.7
STA
1287
STA
1245
VIEW LOOKING UP
(TYPICAL)  A-A  2938145
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 1 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.

### Page 37 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
I LBL  LBL  LBL  LBL  LBL  LBL
88.7  81.3  74  65  59  53
STA
1287
_ STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938189
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 2 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  37 of 121

### Page 38 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  LBL  LBL  LBL  BL
46.3  39.7  33  25.7  18.3  11  5.5
| 1287  STA
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  B  2938203
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 3 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  38 of 121

### Page 39 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
BL  RBL  RBL  RBL  RBL  RBL  RBL  RBL
5.5  11  18.3  25.7  33  39.7  46.3  STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938210
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 4 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  39 of 121

### Page 40 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
RBL  RBL  RBL  RBL  RBL  RBL  RBL
46.3  53  59  65  74  81.3  88.7
STA
1287
J
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938212
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 5 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  40 of 121

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)(b) --SOLID RIVETInspect1
(a) Do a detailed inspection of the sloping pressure deck web solid rivets common to the stiffeners from STA
1245 to STA 1287, Left Buttock Line (LBL) 65 and to LBL 5.5 and Right Buttock Line (RBL) 74 to RBL
5.5 for any damaged solid rivet.
(b) Tactile assessment on the manufacture solid rivet head is required when doing the detailed inspection.
FIGURE 3: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
41 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 42 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 3.
RBL
88.7
BL O
LBL
88.7
STA
1308
STA
1287 A
SLOPING PRESSURE DECK
STA
1245
887 L 483 257  RBL  RBL  RBL  RBL
25.7  46.3  65  88.7
_ STA
1287
STA
1245
VIEW LOOKING UP
(TYPICAL)  2938501
A-A
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 1 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  42 of 121

### Page 43 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  LBL  LBL  ALBL
88.7  81.3  73.93  65  60.47  52.93  46.3
STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938504
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 2 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  43 of 121

### Page 44 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  LBL  LBL  BL
46.3  40.35  32.93  20.22  10.93  6.6  STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938505
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 3 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  44 of 121

### Page 45 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
BL  RBL  RBL  RBL  RBL  RBL  RBL  RBL
6.6  10.93  20.22  25.7  32.93  40.35  46.3  STA
1287
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938507
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 4 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  45 of 121

### Page 46 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
RBL  RBL  RBL  RBL  RBL  RBL  RBL
46.3  53.93  60.47  65  73.93  81.3  88.7  STA
1287
·*¢=
STA
1245
VIEW LOOKING UP
DETAILED INSPECTION  2938509
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 5 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  46 of 121

### Page 47

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)(b) --SOLID RIVETInspect1
(a) Do a detailed inspection of the sloping pressure deck web solid rivets common to the stiffeners from STA
1245 to STA 1287, Left Buttock Line (LBL) 65 to LBL 6.6 and Right Buttock Line (RBL) 65 to RBL 6.6 for
any damaged solid rivet.
(b) Tactile assessment on the manufacture solid rivet head is required when doing the detailed inspection.
FIGURE 4: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - DETAILED INSPECTION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
47 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 48 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 1-2.
RBL
88.7
BL O
LBL
88.7
STA
1308
STA
1287 A
SLOPING PRESSURE DECK  STA  7
1245
LBL  LBL  LBL  25.7 46.3 65  • RBL  RBL  RBL
88.7  65  25.7  88.7
STA
1287
STA
1245
VIEW LOOKING UP  (TYPICAL)  2939770
A-A
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET REMOVAL
(SHEET 1 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0093 RB
Work - See page 1 for details.  48 of 121

### Page 49 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
STIFFENER
(TYPICAL)
LBL  81.3  L8L 59 13 46.3  39.7 33  LBL  LBL
88.7  46.3  39.7  18.3  25.7  STA
1 1287
STA
1245
SLOPING
PRESSURE DECK
I LEFT SIDE SLOPING PRESSURE DECK WEB
(TYPICAL)
2946639
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET REMOVAL
(SHEET 2 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished  Work - See page 1 for details.  49 of 121

### Page 50 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBI  LBL  LBL  LBL
39.7  33  25.7  18.3  11  5.5
STA
1287
TYPICAL ALL
LOCATIONS
++
STA
1245
SLOPING
PRESSURE DECK
VIEW LOOKING UP ON AN AFFECTED FASTENER ROW
(TYPICAL)
2939771
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET REMOVAL
(SHEET 3 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0093 RB
Work - See page 1 for details.  50 of 121

### Page 51 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
STIFFENER
(TYPICAL)
BL RBL RBL  RBL  RBL  RAB 9.7  RBL  RBL RBL RBL  RBL  RBL  RBL
5.5  11  18.3  25.7  39.7  46.3  53  59  65  74  81.3  88.7 STA  1287
STA
1245
SLOPING
PRESSURE DECK
RIGHT SIDE SLOPING PRESSURE DECK WEB
(TYPICAL)
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET REMOVAL
(SHEET 4 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  51 of 121

### Page 52 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
BL  RBL  RBL  RBL  RBL  RBL  RBL  RBL
5.5  11  18.3  25.7  33  39.7  46.3  STA
1287
J
***¢
STA
1245
SLOPING  TYPICAL ALL
PRESSURE DECK  LOCATIONS
VIEW LOOKING UP ON AN AFFECTED FASTENER ROW
(TYPICAL)
2946659
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET REMOVAL
(SHEET 5 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0093 RB
Work - See page 1 for details.  52 of 121

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) --SOLID RIVET OR
BLIND FASTENER
Remove1
(b)(c) --FASTENER HOLESInspect2
(a) Caution, do not damage the fastener hole during removal of the solid rivet shank. Refer to 777-200 SRM
51-40-02 or 777-300 SRM 51-40-02 as an accepted procedure.
(b) Do an Open Hole High Frequency Eddy Current (HFEC) Inspection of the fastener holes for any crack
on web and stiffener/overwing beam lower chord. Inspect in accordance with 777 NDT Manual Part 6,
51-00-02.
(c) Make sure the hole is free of any crack before fastener installation. If crack is found, contact The Boeing
Company for repair instructions and do the repair.
FIGURE 5: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET REMOVAL
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
53 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 54 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 1-2.
RBL
88.7
BL O
I LBL
88.7
STA
1308
STA
1287 A
SLOPING PRESSURE DECK
STA
1245
LBL  LBL  LBL  LBL  BL  RBL  RBL  46.3 RBL  • RBL
88.7  65  46.3  25.7  25.7  65  88.7
STA
1287
STA
1245
VIEW LOOKING UP  (TYPICAL)  2939773
A-A
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION
(SHEET 1 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  54 of 121

### Page 55 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
STIFFENER
(TYPICAL)
LBL  LET STA
88.7  18.3
1 1287
STA
1245
SLOPING
PRESSURE DECK
LEFT SIDE SLOPING PRESSURE DECK WEB
(TYPICAL)
B
2939774
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION
(SHEET 2 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  55 of 121

### Page 56 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
LBL  LBL  LBL  LBL  LBL  LBL
39.7  33  25.7  18.3  11  5.5
STA
1287
₴ 3
TYPICAL ALL
LOCATIONS
*****+***
_ STA
1245
SLOPING
PRESSURE DECK
VIEW LOOKING UP ON AN AFFECTED FASTENER ROW
(TYPICAL)
2946680
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION
(SHEET 3 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  56 of 121

### Page 57 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
STIFFENER
(TYPICAL)
BL RBL RBL  • RBL  RBL
5.5  11  18.3  25.7
STA
1245
SLOPING
PRESSURE DECK
RIGHT SIDE SLOPING PRESSURE DECK WEB
(TYPICAL)
2946682
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION
(SHEET 4 OF 6)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  57 of 121

### Page 58 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
BL  RBL  RBL  RBL  RBL  RBL  RBL  RBL
5.5  11  18.3  25.7  33  39.7  46.3  STA
1287
J
031:
STA
2 3)  1245
SLOPING  TYPICAL ALL
PRESSURE DECK  LOCATIONS
VIEW LOOKING UP ON AN AFFECTED FASTENER ROW
(TYPICAL)
2946685
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION
(SHEET 5 OF 6)
Original Issue: November 24, 2020
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-53A0093 RB
Work - See page 1 for details.  58 of 121

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) --FASTENER HOLESMeasure1
(b)(c) -BACR15FT7D()CSOLID RIVETInstall (New)2
(d) -BMS 10-11, TYPE IPRIMERApply3
(e) -BMS 3-23, TYPE IIORGANIC CORRO-
SION INHIBITING
COMPOUND
Apply
(a) Make sure existing fastener holes are clean and round, and meet the size and quality requirements in
accordance with 777-200 SRM 51-40-05 or 777-300 SRM 51-40-05.
(b) If blind fasteners were installed, remove any Foreign Object Debris (FOD) including original solid rivet
shanks removed during the initial fastener removal.
(c) Install fastener. Refer to 777-200 SRM 51-40-02 or 777-300 SRM 51-40-02 as an accepted procedure.
(d) Apply two coats of BMS 10-11 Type I primer. Refer to SOPM 20-41-02 as an accepted procedure.
(e) Apply one layer of organic corrosion inhibiting compound to the surface of the repair area. Refer to SOPM
20-41-05 as an accepted procedure.
FIGURE 6: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL SOLID RIVET
INSTALLATION
(SHEET 6 OF 6)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: November 24, 2020
777-53A0093 RB
59 of 121
REQUIREMENTS BULLETIN 777-53A0093
ALERTALERT

### Page 60 (OCR)

REQUIREMENTS BULLETIN 777-53A0093
ALERT  ALERT
This Figure applies only to: Group 1-2.
RBL
88.7
BL O
LBL
88.7
STA
1308
STA
1287 A
SLOPING PRESSURE DECK
STA
1245
LBL  65  BL  RBL  25.7  46.3  RBL  RBL  65  RBL  88.7
- STA  1287
STA
1245
VIEW LOOKING UP
I (TYPICAL)  A-A  2938759
FIGURE 7: STA 1245 TO STA 1287 SLOPING PRESSURE DECK WEB - TYPICAL FASTENER REMOVAL
(SHEET 1 OF 5)
Original Issue: November 24, 2020
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  777-53A0093 RB
Work - See page 1 for details.  60 of 121

The text continues at https://openairdocs.org/service-documents/boeing/777-53a0093/file/34d4a83287f1.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
