# Boeing Alert Requirements Bulletin 777-53A0098 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-1312; AD 2023-08-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 777-53A0098 RB](https://openairdocs.org/service-documents/boeing/777-53a0098-rb.md)
- Title as filed: 777-53A0098-00 RB
- Pages: 162
- PDF: https://openairdocs.org/files/sha256/cd/e0/cde074000de3c394647c9bd18a29448c239de8803c8405856659f3e786655fa9
- Page: https://openairdocs.org/service-documents/boeing/777-53a0098-rb/file/cde074000de3

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-53A0098 RB
Original Issue: April 05, 2022
ATA System: 5380
SUBJECT: FUSELAGE - Section 48 - Station 2370 Pivot Bulkhead Forward Outer Chord and
Longeron Fitting - Inspection and Repair
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2022 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: April 05, 2022
777-53A0098 RB
1 of 162
6.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
2 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1 . E F F E C T I V I T Y  ................................................ 5
A. Airplanes ................................................ 5
B . S p a r e s  A f f e c t e d  ............................................ 8
2. CONCURRENT REQUIREMENTS ..................................... 8
3 . C O M P L I A N C E  ................................................ 8
4. APPROVAL ................................................ 4 0
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 3
A. General Information ......................................... 4 3
B. Work Instructions ........................................... 4 4
FIGURE 3: LEFT SIDE STA 2370 PIVOT BULKHEAD - DETAILED AND HIGH FREQUENCY EDDY
CURRENT INSPECTION ................................... 9 9
FIGURE 12: LEFT SIDE STA 2370 PIVOT BULKHEAD WEB, AFT OUTER CHORD, UPPER FORWARD
CHORD, LOWER FORWARD CHORD AND SKIN - HIGH FREQUENCY EDDY CURRENT
INSPECTION ......................................... 1 0 3
FIGURE 13: LEFT SIDE STA 2370 TO STA 2380 - UPPER AFT LONGERON EXTENSION FITTINGS -
DETAILED INSPECTION ................................... 1 0 8
FIGURE 14: LEFT SIDE STA 2370 PIVOT BULKHEAD - FORWARD OUTER CHORD AND SPLICE ANGLES
- LOCATION .......................................... 1 1 2
FIGURE 20: LEFT SIDE STA 2370 PIVOT BULKHEAD - FORWARD OUTER CHORD AND SPLICE ANGLES
- INSTALLATION ....................................... 1 2 1
FIGURE 28: RIGHT SIDE STA 2370 PIVOT BULKHEAD - DETAILED AND HIGH FREQUENCY EDDY
CURRENT INSPECTION ................................... 1 3 1
FIGURE 37: RIGHT SIDE STA 2370 PIVOT BULKHEAD WEB, AFT OUTER CHORD, UPPER FORWARD
CHORD, LOWER FORWARD CHORD AND SKIN - HIGH FREQUENCY EDDY CURRENT
INSPECTION ......................................... 1 3 5
FIGURE 38: RIGHT SIDE STA 2370 TO STA 2380 - UPPER AFT LONGERON EXTENSION FITTINGS -
DETAILED INSPECTION ................................... 1 4 0
FIGURE 39: RIGHT SIDE STA 2370 PIVOT BULKHEAD - FORWARD OUTER CHORD AND SPLICE
ANGLES - LOCATION .................................... 1 4 4
FIGURE 45: RIGHT SIDE STA 2370 PIVOT BULKHEAD - FORWARD OUTER CHORD AND SPLICE
ANGLES - INSTALLATION .................................. 1 5 3
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
3 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
4 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-53A0098 RB
Original Issue: April 05, 2022
ATA System: 5380
SUBJECT: FUSELAGE - Section 48 - Station 2370 Pivot Bulkhead Forward Outer Chord and
Longeron Fitting - Inspection and Repair
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line
number(s) 245-1566, 1568-1573, 1575-1580, 1582-1586, 1588-1604, 1606-1610, 1612-1614,
1616-1619, 1621-1623, 1625-1628, 1630-1632, 1634-1637, 1639-1641, 1643-1646, 1648-1650,
1652-1655, 1657-1658, 1660-1667, 1669, 1671, 1673, 1675-1676, 1678-1679, 1681, 1683-1684,
1686-1687, 1689-1715, 1717-1722, 1724-1726, 1729-9999 in 4 Group(s). Where the effectivity is
presented with hyphens between line numbers, the airplane applicability means "through" and
"inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
DESCRIPTIONCONFIGURATIONGROUP
777-200, 777-300 Airplanes, line numbers 245 through 422.-1
777-200, 777-300 Airplanes, line numbers 424 through 1117.-2
777-200LR, 777-300ER Airplanes.-3
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
5 of 162

### Page 6

DESCRIPTIONCONFIGURATIONGROUP
777F Airplanes.-4
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA246 - WA250
1WA261 - WA266
2WA281 - WA283
2WA301 - WA304
1WB021
1WB032 - WB046
1WB073 - WB088
1WB134 - WB138
2WB139 - WB148
1WB154 - WB155
1WB172 - WB175
2WB176 - WB177
1WB189 - WB190
2WB191 - WB194
1WB201 - WB212
2WB213 - WB215
1WB236 - WB242
2WB243 - WB247
1WB273
1WB298 - WB302
1WB319 - WB335
1WB341 - WB342
1WB367
2WB368
1WB384 - WB388
1WB427 - WB435
GroupVariable Number
2WB436 - WB439
1WB449 - WB453
1WB476
1WB481 - WB484
1WB507
2WB508 - WB512
2WB536 - WB537
1WB554
2WB596 - WB597
1WB603 - WB606
1WB616 - WB618
2WB619 - WB622
1WB631 - WB638
1WB646
2WB647 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC114
2WC115 - WC120
2WC221 - WC224
1WC241 - WC242
2WC243
1WC281 - WC282
2WC283 - WC290
2WC301 - WC308
2WC361 - WC364
GroupVariable Number
2WC371 - WC374
2WC381 - WC395
2WC441
2WC446 - WC449
2WC456 - WC459
2WC486 - WC493
2WC506 - WC508
2WC521 - WC522
2WC531 - WC536
2WC546 - WC548
2WC556
2WC566 - WC567
2WC571 - WC574
2WC581
2WC586 - WC587
2WC591 - WC595
3WD001 - WD002
3WD011 - WD018
3WD031 - WD036
3WD046 - WD055
3WD066 - WD075
3WD081 - WD089
3WD091
3WD096
3WD101 - WD106
3WD111 - WD112
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
6 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 7

GroupVariable Number
3WD116 - WD117
3WD121 - WD123
3WD156
3WD501 - WD513
3WD521 - WD541
3WD546 - WD554
3WD561 - WD573
3WD581 - WD599
3WD606 - WD609
3WD621 - WD632
3WD651 - WD665
3WD671 - WD677
3WD691 - WD709
3WD741 - WD752
3WD761 - WD771
3WD786 - WD788
3WD796 - WD837
3WD846 - WD867
3WD871 - WD918
3WD921 - WD957
3WD966 - WD970
3WD981 - WD982
3WD986 - WD987
3WD991 - WD996
3WE001 - WE007
3WE011 - WE012
3WE021 - WE026
3WE031 - WE040
3WE051 - WE057
3WE071 - WE078
3WE081 - WE084
3WE091 - WE095
3WE126 - WE178
GroupVariable Number
3WE186 - WE219
3WE226 - WE231
3WE236 - WE253
3WE261 - WE267
3WE271 - WE278
3WE291 - WE298
3WE301 - WE320
3WE331 - WE356
3WE366 - WE368
3WE376 - WE377
3WE381
3WE386 - WE387
3WE391 - WE392
3WE396 - WE411
3WE416 - WE420
3WE426 - WE431
3WE436 - WE446
3WE451 - WE484
3WE486 - WE493
3WE495 - WE499
3WE501 - WE504
3WE511 - WE516
3WE526 - WE528
3WE536 - WE549
3WE556 - WE573
3WE576 - WE587
3WE591
3WE601 - WE605
3WE626 - WE627
3WE631
3WE641 - WE642
3WE646 - WE647
3WE651 - WE661
GroupVariable Number
3WE666 - WE677
3WE681 - WE689
3WE701 - WE705
3WE711 - WE712
3WE731 - WE732
3WE736 - WE740
3WE746 - WE772
3WE776 - WE786
3WE791 - WE792
3WE796 - WE798
3WE801 - WE806
3WE811 - WE812
3WE826 - WE828
3WE831 - WE835
3WE851 - WE853
3WE856 - WE857
3WE861 - WE863
3WE866 - WE868
3WE871
4WF001 - WF004
4WF016 - WF029
4WF031 - WF043
4WF046 - WF077
4WF081 - WF088
4WF096 - WF101
4WF106 - WF109
4WF111 - WF124
4WF131 - WF144
4WF146 - WF147
4WF151 - WF152
4WF156 - WF173
4WF176 - WF184
4WF191
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
7 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 8

GroupVariable Number
4WF201
4WF206 - WF217
4WF221 - WF228
4WF231 - WF248
4WF256 - WF258
GroupVariable Number
4WF261 - WF262
4WF266 - WF288
4WF296
4WF301 - WF306
4WF311 - WF315
GroupVariable Number
4WF321
4WF326 - WF328
4WF336 - WF343
4WF366 - WF367
4WF371 - WF372
B. Spares Affected
None.
2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 777-53A0098 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 777-53A0098 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Table 1 through Table 14 in
accordance with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 20,000
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
8 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 9

Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 1: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 2: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 2.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 2.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 9.CONDITION 2.1 (ACTION
2): Do the actions specified
in Table 9.
-Before further flight.CONDITION 2.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 2.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 2.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 9.CONDITION 2.2 (ACTION
3): Do the actions specified
in Table 9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
9 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 10

Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 3 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 3: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 3 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
-Before further flight.CONDITION 4 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 4: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 4 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
10 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 11

Group 1:
Table 2: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 20,000
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 5: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 6: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 6.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 6.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 10.CONDITION 6.1 (ACTION
2): Do the actions specified
in Table 10.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
11 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 12

Group 1:
Table 2: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 6.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 6.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 6.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 10.CONDITION 6.2 (ACTION
3): Do the actions specified
in Table 10.
-Before further flight.CONDITION 7 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 7: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 7 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
-Before further flight.CONDITION 8 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 8: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 8 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
12 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 13

Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 30,000
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 9: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 10: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 10.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 10.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 9.CONDITION 10.1 (ACTION
2): Do the actions specified
in Table 9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
13 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 14

Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 10.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 10.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 10.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 9.CONDITION 10.2 (ACTION
3): Do the actions specified
in Table 9.
-Before further flight.CONDITION 11 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 11: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 11 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 12 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 12: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 12 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
14 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 15

Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 30,000
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 13: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
15 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 16

Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 14: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 14.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 14.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 10.CONDITION 14.1 (ACTION
2): Do the actions specified
in Table 10.
-Before further flight.CONDITION 14.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 14.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 14.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 10.CONDITION 14.2 (ACTION
3): Do the actions specified
in Table 10.
-Before further flight.CONDITION 15 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 15: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 15 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
16 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 17

Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 16 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 16: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 16 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 3:
Table 5: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 20,000
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
17 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 18

Group 3:
Table 5: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 17: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 18: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 18.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 18.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 11.CONDITION 18.1 (ACTION
2): Do the actions specified
in Table 11.
-Before further flight.CONDITION 18.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 18.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 18.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 11.CONDITION 18.2 (ACTION
3): Do the actions specified
in Table 11.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
18 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 19

Group 3:
Table 5: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 19 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 19: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 19 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 20 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 20: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 20 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
19 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 20

Group 3:
Table 6: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 20,000
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 21: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 22: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 22.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 22.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 12.CONDITION 22.1 (ACTION
2): Do the actions specified
in Table 12.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
20 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 21

Group 3:
Table 6: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 22.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 22.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 22.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 12.CONDITION 22.2 (ACTION
3): Do the actions specified
in Table 12.
-Before further flight.CONDITION 23 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 23: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 23 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 24 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 24: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 24 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
21 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 22

Group 3:
Table 6: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 4:
Table 7: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 18,750
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 25: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
22 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 23

Group 4:
Table 7: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 26: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 26.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 26.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 13.CONDITION 26.1 (ACTION
2): Do the actions specified
in Table 13.
-Before further flight.CONDITION 26.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 26.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 26.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 13.CONDITION 26.2 (ACTION
3): Do the actions specified
in Table 13.
-Before further flight.CONDITION 27 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 27: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 27 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
23 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 24

Group 4:
Table 7: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 28 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 28: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 28 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 4:
Table 8: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 1,500
flight cycles or
750 days after
the Original Is-
sue date of Re-
quirements Bul-
letin 777-
53A0098 RB,
whichever oc-
curs first.
Before 18,750
total flight cycles
or 120,000 total
flight hours,
whichever oc-
curs first
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
24 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 25

Group 4:
Table 8: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 29: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 30: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 30.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 30.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS At the times specified in Table 14.CONDITION 30.1 (ACTION
2): Do the actions specified
in Table 14.
-Before further flight.CONDITION 30.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 30.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 30.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
At the times specified in Table 14.CONDITION 30.2 (ACTION
3): Do the actions specified
in Table 14.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
25 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 26

Group 4:
Table 8: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.CONDITION 31 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 31: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 31 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 32 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 32: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 32 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
26 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 27

Group 1-2:
Table 9: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Within 120,000
flight hours after
the repair.
Within 30,000
flight cycles after
the repair.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All airplanes repaired in
accordance with Re-
quirements Bulletin
777-53A0098 RB.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 33: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 34: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 34.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 34.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 34.1 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
27 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 28

Group 1-2:
Table 9: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 34.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 34.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 34.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 34.2 (ACTION
3): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 35 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 35: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 35 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 36 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 36: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 36 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
28 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 29

Group 1-2:
Table 9: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 1-2:
Table 10: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Within 120,000
flight hours after
the repair.
Within 30,000
flight cycles after
the repair.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All airplanes repaired in
accordance with Re-
quirements Bulletin
777-53A0098 RB.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 37: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 38: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
29 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 30

Group 1-2:
Table 10: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 38.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 38.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 38.1 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 38.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 38.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 38.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 38.2 (ACTION
3): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 39 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 39: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 39 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
30 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 31

Group 1-2:
Table 10: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 40 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 40: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 12,000 flight
cycles or 72,000
flight hours,
whichever occurs
first.
-CONDITION 40 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 3:
Table 11: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Within 120,000
flight hours after
the repair.
Within 20,000
flight cycles after
the repair.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All airplanes repaired in
accordance with Re-
quirements Bulletin
777-53A0098 RB.
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 41: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
31 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 32

Group 3:
Table 11: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 42: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 42.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 42.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 42.1 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 42.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 42.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 42.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 42.2 (ACTION
3): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
32 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 33

Group 3:
Table 11: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 43 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 43: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 43 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 44 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 44: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 44 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
33 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 34

Group 3:
Table 12: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Within 120,000
flight hours after
the repair.
Within 20,000
flight cycles after
the repair.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All airplanes repaired in
accordance with Re-
quirements Bulletin
777-53A0098 RB.
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 45: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 46: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 46.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 46.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 46.1 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
34 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 35

Group 3:
Table 12: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 46.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 46.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 46.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 46.2 (ACTION
3): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 47 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 47: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 47 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 48 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 48: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 6,000 flight
cycles or 36,000
flight hours,
whichever occurs
first.
-CONDITION 48 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
35 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 36

Group 3:
Table 12: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 4:
Table 13: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Within 120,000
flight hours after
the repair.
Within 18,750
flight cycles after
the repair.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All airplanes repaired in
accordance with Re-
quirements Bulletin
777-53A0098 RB.
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 49: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 50: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
36 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 37

Group 4:
Table 13: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 50.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 50.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 50.1 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 50.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 50.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 50.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 50.2 (ACTION
3): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 51 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 51: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 51 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
37 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 38

Group 4:
Table 13: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 52 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 52: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 52 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 4:
Table 14: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Within 120,000
flight hours after
the repair.
Within 18,750
flight cycles after
the repair.
Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All airplanes repaired in
accordance with Re-
quirements Bulletin
777-53A0098 RB.
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 53: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
38 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 39

Group 4:
Table 14: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 54: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-Before further flight.CONDITION 54.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 54.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 54.1 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
-Before further flight.CONDITION 54.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 54.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -Before further flight.CONDITION 54.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 54.2 (ACTION
3): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
39 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 40

Group 4:
Table 14: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Post Repair Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time (Whichever
Occurs First)
ActionCondition
-Before further flight.CONDITION 55 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 55: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 55 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
-Before further flight.CONDITION 56 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 56: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
Within 5,000 flight
cycles or 30,000
flight hours,
whichever occurs
first.
-CONDITION 56 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
40 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 41

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
41 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 42

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
42 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT
BLANK PAGE

### Page 43

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 777-SL-51-013, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
43 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 44

6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation or assembly to detect damage, failure or irregularity. This could include
tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
12. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements
Do the actions that follow on one side of the airplane at a time. Do not remove the forward outer
chord and splice angles from the left and right side at the same time. Do all actions on one side
before you do any action on the opposite side.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
44 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 45

Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 1: LEFT
SIDE ACCESS AND
PREPARATION
-Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
-FIGURE 3
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 1: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 3
Do PART 2: LEFT
SIDE, PREPARA-
TION FOR THE RE-
PLACEMENT OF
THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 2: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 12
FIGURE 13
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
45 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 46

Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
-FIGURE 14CONDITION 2.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 2.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS
FIGURE 20
Do PART 3: LEFT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-In accordance with Table 9.CONDITION 2.1 (ACTION
2): Do the actions specified
in Table 9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
46 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 47

Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
--CONDITION 2.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 2.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -FIGURE 14CONDITION 2.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
FIGURE 20
Do PART 3: LEFT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-In accordance with Table 9.CONDITION 2.2 (ACTION
3): Do the actions specified
in Table 9.
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-CONDITION 3 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 3: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
-FIGURE 3CONDITION 3 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
47 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 48

Group 1:
Table 1: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-CONDITION 4 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 4: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
-FIGURE 3CONDITION 4 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 1:
Table 2: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 5: RIGHT
SIDE ACCESS AND
PREPARATION
-.Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
-FIGURE 28
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
48 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 49

Group 1:
Table 2: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 5: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 28
Do PART 6: RIGHT
SIDE, PREPARA-
TION FOR THE RE-
PLACEMENT OF
THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 6: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 37
FIGURE 38
-FIGURE 39CONDITION 6.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 6.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS
FIGURE 45
Do PART 7: RIGHT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-In accordance with Table 10.CONDITION 6.1 (ACTION
2): Do the actions specified
in Table 10.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
49 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 50

Group 1:
Table 2: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
--CONDITION 6.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 6.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -FIGURE 39CONDITION 6.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
FIGURE 45
Do PART 7: RIGHT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-In accordance with Table 10.CONDITION 6.2 (ACTION
3): Do the actions specified
in Table 10.
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-CONDITION 7 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 7: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
-FIGURE 28CONDITION 7 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
50 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 51

Group 1:
Table 2: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-CONDITION 8 (ACTION 1):
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 8: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
-FIGURE 28CONDITION 8 (ACTION 2):
Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 1: LEFT
SIDE ACCESS AND
PREPARATION
-Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
FIGURE 3
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
51 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 52

Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 9: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
FIGURE 3
Do PART 2: LEFT
SIDE, PREPARA-
TION FOR THE RE-
PLACEMENT OF
THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 10: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 12
FIGURE 13
-FIGURE 14CONDITION 10.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 10.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS
FIGURE 20
Do PART 3: LEFT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-In accordance with Table 9.CONDITION 10.1 (ACTION
2): Do the actions specified
in Table 9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
52 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 53

Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
--CONDITION 10.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 10.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -FIGURE 14CONDITION 10.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
FIGURE 20
Do PART 3: LEFT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-In accordance with Table 9.CONDITION 10.2 (ACTION
3): Do the actions specified
in Table 9.
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-CONDITION 11 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 11: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
-FIGURE 3CONDITION 11 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
53 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 54

Group 2:
Table 3: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-CONDITION 12 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 12: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
-FIGURE 3CONDITION 12 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
54 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 55

Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 5: RIGHT
SIDE ACCESS AND
PREPARATION
-.Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
-FIGURE 28
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 13: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 28
Do PART 6: RIGHT
SIDE, PREPARA-
TION FOR THE RE-
PLACEMENT OF
THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 14: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 37
FIGURE 38
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
55 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 56

Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
-FIGURE 39CONDITION 14.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 14.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS
FIGURE 45
Do PART 7: RIGHT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-In accordance with Table 10.CONDITION 14.1 (ACTION
2): Do the actions specified
in Table 10.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
56 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 57

Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
--CONDITION 14.2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 14.2: ANY
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS -FIGURE 39CONDITION 14.2 (ACTION
2): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
FIGURE 45
Do PART 7: RIGHT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-In accordance with Table 10.CONDITION 14.2 (ACTION
3): Do the actions specified
in Table 10.
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-CONDITION 15 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 15: ANY
LONGERON FITTING
CRACK FOUND AND
NO PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND
-FIGURE 28CONDITION 15 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
57 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 58

Group 2:
Table 4: Right Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 8: RIGHT
SIDE CLOSE AC-
CESS
-CONDITION 16 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 16: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND ANY
LONGERON FITTING
CRACK FOUND
-FIGURE 28CONDITION 16 (ACTION
2): Repeat the DET and
HFEC inspection of the STA
2370 Pivot Bulkhead For-
ward Outer Chord and
Longeron Fitting for any
crack. (a)
(a) It is not required to do the STA 2370 pivot bulkhead forward outer chord and longeron fitting DET and
HFEC inspection in areas where a repair covers the affected inspection zone provided:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin 777-
53A0098 RB and installed after the Original Issue date of Requirements Bulletin 777-53A0098
RB, AND
2. The installed repair was approved by the Boeing Company Organization Designation Authorization
(ODA) via a FAA Form 8100-9.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
58 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 59

Group 3:
Table 5: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
Do PART 1: LEFT
SIDE ACCESS AND
PREPARATION
-Do a Detailed (DET) and
High Frequency Eddy Cur-
rent (HFEC) inspection of
the STA 2370 Pivot Bulk-
head Forward Outer Chord
and Longeron Fitting for any
crack.
All Airplanes.
FIGURE 3
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-Repeat the DET and HFEC
inspection of the STA 2370
Pivot Bulkhead Forward
Outer Chord and Longeron
Fitting for any crack.
CONDITION 17: NO
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
FIGURE 3
Do PART 2: LEFT
SIDE, PREPARA-
TION FOR THE RE-
PLACEMENT OF
THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-Do a DET inspection of the
upper AFT longeron exten-
sion fittings at STA 2370 to
STA 2380 and open hole
HFEC inspection of the STA
2370 Pivot Bulkhead web,
AFT outer chord, upper and
lower forward chord, and
skin for any crack.
CONDITION 18: ANY
PIVOT BULKHEAD
FORWARD OUTER
CHORD CRACK
FOUND AND NO
LONGERON FITTING
CRACK FOUND
-FIGURE 12
FIGURE 13
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
59 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

### Page 60

Group 3:
Table 5: Left Side Body Station (STA) 2370 Pivot Bulkhead Forward Outer Chord and Longeron Fitting
- Detailed (DET) and High Frequency Eddy Current (HFEC) Inspection
Refer to the listed
procedures in SB
777-53A0098 Origi-
nal Issue or later
approved revi-
sions as an accept-
ed procedure
Method of ComplianceActionCondition
-FIGURE 14CONDITION 18.1 (ACTION
1): Replace the Pivot Bulk-
head Forward Outer Chord
and Splice Angle.
CONDITION 18.1: NO
CRACK FOUND AS A
RESULT OF THE DET
OR OPEN HOLE HFEC
INSPECTIONS
FIGURE 20
Do PART 3: LEFT
SIDE, RESTORA-
TION AFTER THE
REPLACEMENT
OF THE FORWARD
OUTER CHORD
AND SPLICE AN-
GLES
-
AND
Do PART 4: LEFT
SIDE CLOSE AC-
CESS
-In accordance with Table 11.CONDITION 18.1 (ACTION
2): Do the actions specified
in Table 11.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 05, 2022
777-53A0098 RB
60 of 162
REQUIREMENTS BULLETIN 777-53A0098
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/777-53a0098-rb/file/cde074000de3.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
