# Boeing Alert Requirements Bulletin 777-53A0100 RB: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-0769; AD 2024-16-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Requirements Bulletin 777-53A0100 RB](https://openairdocs.org/service-documents/boeing/777-53a0100-rb.md)
- Title as filed: RB 777-53A0100-00 RB
- Pages: 141
- PDF: https://openairdocs.org/files/sha256/6e/0e/6e0ef17defb42967fdd8758e2fc4fad0b411a6c2d1146060465b56a937f612a3
- Page: https://openairdocs.org/service-documents/boeing/777-53a0100-rb/file/6e0ef17defb4

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-53A0100 RB
Original Issue: March 16, 2023
ATA System: 5330 5700
SUBJECT: FUSELAGE - Section 43 - Fuselage Skin Common to the Left and Right Underwing
Longeron Inspection
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
Copyright © 2023 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: March 16, 2023
777-53A0100 RB
1 of 141
5.0

### Page 2

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
2 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
1. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
A. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
B. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
FIGURE 1: LEFT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37 -
EXTERNAL INSPECTION [Group 1, Configuration 2, 4; Group 3, Configuration 2, 4; Group 4,
Configuration 2, 4; Group 6, Configuration 2, 4] . . . . . . . . . . . . . . . . . . . . . . . 118
FIGURE 2: LEFT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37 -
INTERNAL INSPECTION [Group 1, Configuration 2, 4; Group 3, Configuration 2, 4; Group 4,
Configuration 2, 4; Group 6, Configuration 2, 4] . . . . . . . . . . . . . . . . . . . . . . . 121
FIGURE 3: LEFT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37 -
EXTERNAL INSPECTION [Group 2, Configuration 2, 4; Group 5, Configuration 2, 4; Group 7,
Configuration 2, 4; Group 8, Configuration 2, 4] . . . . . . . . . . . . . . . . . . . . . . . 124
FIGURE 4: LEFT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37 -
INTERNAL INSPECTION [Group 2, Configuration 2, 4; Group 5, Configuration 2, 4; Group 7,
Configuration 2, 4; Group 8, Configuration 2, 4] . . . . . . . . . . . . . . . . . . . . . . . 127
FIGURE 9: RIGHT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37
- EXTERNAL INSPECTION [Group 1, Configuration 2-3; Group 3, Configuration 2-3; Group 4,
Configuration 2-3; Group 6, Configuration 2-3] . . . . . . . . . . . . . . . . . . . . . . . 130
FIGURE 10: RIGHT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37
- INTERNAL INSPECTION [Group 1, Configuration 2-3; Group 3, Configuration 2-3; Group 4,
Configuration 2-3; Group 6, Configuration 2-3] . . . . . . . . . . . . . . . . . . . . . . . 133
FIGURE 11: RIGHT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37
- EXTERNAL INSPECTION [Group 2, Configuration 2-3; Group 5, Configuration 2-3; Group 7,
Configuration 2-3; Group 8, Configuration 2-3] . . . . . . . . . . . . . . . . . . . . . . . 136
FIGURE 12: RIGHT SIDE - FUSELAGE SKIN BETWEEN STA 1014 AND STA 1035, AT STRINGER S-37
- INTERNAL INSPECTION [Group 2, Configuration 2-3; Group 5, Configuration 2-3; Group 7,
Configuration 2-3; Group 8, Configuration 2-3] . . . . . . . . . . . . . . . . . . . . . . . 139
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
3 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
4 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
777
Requirements Bulletin
ALERT
Number: 777-53A0100 RB
Original Issue: March 16, 2023
ATA System: 5330 5700
SUBJECT: FUSELAGE - Section 43 - Fuselage Skin Common to the Left and Right Underwing
Longeron Inspection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN
(RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL
TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB
WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. Effectivity
A. Airplanes
This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line
number(s) 1-1522, 1524 in 8 Group(s). Where the effectivity is presented with hyphens between
line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9
means line numbers 1 through 9 inclusive.
The Variable Numbers and Group Information for the applicable airplanes is given below.
DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes that have the Underwing Longeron (UWL), without
tab and with stringer S-37 end fitting.
-1
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0087.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0087.
4
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
5 of 141

### Page 6

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes that have the UWL, with tab and without stringer
S-37 end fitting.
-2
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0087.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0087.
4
777-300 airplanes only.-3
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0084.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0084.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0084.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0084.
4
777-300ER airplanes that have the UWL, without tab and with stringer
S-37 end fitting.
-4
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
4
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
6 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 7

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes that have the UWL, with tab and without stringer
S-37 end fitting.
-5
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0084 or
Requirements Bulletin 777-57A0122 RB.
4
777-200LR airplanes that have the UWL, without tab and with stringer
S-37 end fitting.
-6
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
4
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
7 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 8

DESCRIPTIONCONFIGURATIONGROUP
777-200LR airplanes that have the UWL, with tab and without stringer
S-37 end fitting.
-7
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
4
777F airplanes only.-8
Airplanes that have done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
1
Airplanes that have not done the UWL with fuselage skin modification
on the left and right side in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
2
Airplanes that have done the UWL with fuselage skin modification
on the left side only, in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
3
Airplanes that have done the UWL with fuselage skin modification
on the right side only, in accordance with SB 777-53-0087 or
Requirements Bulletin 777-57A0122 RB.
4
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA093
GroupVariable Number
1WA101 - WA104
1WA116 - WA119
1WA131 - WA137
GroupVariable Number
1WA171 - WA175
1WA196 - WA198
1WA206 - WA212
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
8 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 9

GroupVariable Number
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281 - WA282
2WA283
1WA301 - WA304
1WB001 - WB021
1WB031 - WB046
1WB051 - WB088
1WB101 - WB106
1WB121 - WB125
1WB131 - WB142
2WB143 - WB148
1WB151 - WB155
1WB161 - WB177
1WB181 - WB194
1WB201 - WB215
1WB231 - WB247
1WB271 - WB273
1WB276 - WB286
1WB291 - WB302
1WB306 - WB307
1WB311 - WB337
1WB341 - WB342
1WB366 - WB368
1WB371 - WB388
1WB406
1WB411 - WB413
1WB416 - WB439
1WB446 - WB453
1WB476
1WB481 - WB484
GroupVariable Number
3WB501 - WB512
3WB531 - WB537
3WB551 - WB554
3WB591 - WB597
3WB601 - WB606
3WB611 - WB622
3WB631 - WB638
3WB646 - WB649
1WC051 - WC073
1WC101 - WC104
1WC111 - WC117
2WC118 - WC120
1WC221 - WC222
2WC223 - WC224
1WC241 - WC243
1WC281 - WC290
1WC301 - WC308
1WC361 - WC364
1WC371 - WC374
1WC381 - WC394
2WC395
1WC441
1WC446 - WC449
1WC456 - WC459
1WC486 - WC493
1WC506 - WC508
1WC521 - WC522
1WC531 - WC534
2WC535 - WC536
1WC546 - WC547
2WC548
1WC556
2WC566 - WC567
GroupVariable Number
2WC571 - WC574
2WC581
2WC586 - WC587
2WC591 - WC595
6WD001 - WD002
6WD011 - WD013
7WD014 - WD018
7WD031 - WD036
7WD046 - WD055
7WD066 - WD075
7WD081 - WD089
7WD091
7WD096
7WD101 - WD106
7WD111 - WD112
7WD116 - WD117
7WD121 - WD122
4WD501 - WD506
5WD507 - WD513
4WD521 - WD534
5WD535 - WD541
4WD546 - WD551
5WD552 - WD554
4WD561 - WD568
5WD569 - WD573
4WD581 - WD591
5WD592 - WD599
4WD606 - WD609
4WD621 - WD631
5WD632
4WD651 - WD655
5WD656 - WD665
4WD671 - WD675
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
9 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 10

GroupVariable Number
5WD676 - WD677
4WD691 - WD699
5WD700 - WD709
4WD741 - WD742
5WD743 - WD752
4WD761
5WD762 - WD771
4WD786 - WD787
5WD788
5WD796 - WD837
5WD846 - WD867
5WD871 - WD906
5WD911 - WD918
5WD921 - WD957
5WD966 - WD970
5WD981 - WD982
5WD986 - WD987
5WD991 - WD996
5WE001 - WE007
5WE011 - WE012
5WE021 - WE026
5WE031 - WE040
5WE051 - WE057
5WE071 - WE078
5WE081 - WE084
5WE091 - WE095
5WE126 - WE178
5WE186 - WE219
5WE226 - WE231
5WE236 - WE253
5WE261 - WE267
GroupVariable Number
5WE271 - WE278
5WE291 - WE298
5WE301 - WE320
5WE331 - WE346
5WE351 - WE356
5WE376 - WE377
5WE381
5WE386 - WE387
5WE391 - WE392
5WE396 - WE405
5WE416 - WE420
5WE426 - WE431
5WE436 - WE446
5WE451 - WE478
5WE486 - WE493
5WE495 - WE499
5WE501 - WE504
5WE511 - WE516
5WE526 - WE528
5WE536 - WE549
5WE556 - WE571
5WE576 - WE583
5WE591
5WE601 - WE605
5WE626 - WE627
5WE631
5WE641 - WE642
5WE646 - WE647
5WE651 - WE661
5WE666 - WE677
5WE681
GroupVariable Number
5WE701 - WE705
5WE711 - WE712
5WE731 - WE732
5WE736 - WE740
5WE746 - WE764
5WE776 - WE786
5WE791 - WE792
5WE796
5WE811 - WE812
5WE826
8WF001 - WF004
8WF016 - WF027
8WF031 - WF043
8WF046 - WF069
8WF075 - WF077
8WF081 - WF088
8WF096 - WF101
8WF106 - WF109
8WF111 - WF124
8WF131 - WF144
8WF146 - WF147
8WF151 - WF152
8WF156 - WF160
8WF166 - WF173
8WF176 - WF179
8WF181 - WF184
8WF191
8WF206 - WF208
8WF216 - WF217
--
--
B. Spares Affected
None.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
10 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 11

2. CONCURRENT REQUIREMENTS
None.
3. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
Requirements Bulletin 777-53A0100 RB. The Airworthiness Directive will make the compliance tasks and
times given in Requirements Bulletin 777-53A0100 RB mandatory.
Accomplish the required action(s), based on the applicable condition(s) in Tables 1 through 17, in accordance
with Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1-8, Configuration 1:
Table 1: No Further Action Required
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time
ActionCondition
--No further action required.All Airplanes.
Group 1, Configuration 2, 4:
Table 2: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,200
flight cycles or
17,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 8,400 to-
tal flight cycles
or 56,400 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
11 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 12

Group 1, Configuration 2, 4:
Table 2: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (c)
--CONDITION 1, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)
CONDITION 1: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 1, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occur first.
CONDITION 1, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 1, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occurs first.
CONDITION 2, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 2: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 2, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)
2,200 flight cycles
or 17,600 flight
hours, whichever
occurs first.
--CONDITION 2, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)
CONDITION 2, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
12 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 13

Group 1, Configuration 2, 4:
Table 2: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 3, ACTION 1:
Do the left side UWL with
fuselage skin modification in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
CONDITION 3: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 3, ACTION 2:
Do Post Modification inspec-
tions and applicable correc-
tive actions in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 4: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
(c) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,200
flight cycles or 17,600 flight hours, whichever occurs first, after the most recent inspection.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
13 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 14

Group 1, Configuration 2-3:
Table 3: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,200
flight cycles or
17,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 8,400 to-
tal flight cycles
or 56,400 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (c)
--CONDITION 5, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)
CONDITION 5: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 5, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occurs first.
CONDITION 5, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)
CONDITION 5, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
14 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 15

Group 1, Configuration 2-3:
Table 3: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occurs first.
CONDITION 6, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)
CONDITION 6: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 6, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)
2,200 flight cycles
or 17,600 flight
hours, whichever
occurs first.
--CONDITION 6, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)
CONDITION 6, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)
-Before further flight.CONDITION 7, ACTION 1:
Do the right side UWL with
fuselage skin modification in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
CONDITION 7: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 7, ACTION 2:
Do Post Modification inspec-
tions and applicable correc-
tive actions in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 8: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
15 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 16

Group 1, Configuration 2-3:
Table 3: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(c) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,200
flight cycles or 17,600 flight hours, whichever occurs first, after the most recent inspection.
Group 2, Configuration 2, 4:
Table 4: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,200
flight cycles or
17,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 8,400 to-
tal flight cycles
or 56,400 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
16 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 17

Group 2, Configuration 2, 4:
Table 4: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (c)
--CONDITION 9, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)
CONDITION 9: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 9, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occurs first.
CONDITION 9, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 9, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occurs first.
CONDITION 10, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 10: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 10, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)
2,200 flight cycles
or 17,600 flight
hours, whichever
occurs first.
--CONDITION 10, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)
CONDITION 10, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
17 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 18

Group 2, Configuration 2, 4:
Table 4: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 11, ACTION 1:
Do the left side UWL with
fuselage skin modification in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
CONDITION 11: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 11, ACTION 2:
Do Post Modification inspec-
tions and applicable correc-
tive actions in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 12: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
(c) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,200
flight cycles or 17,600 flight hours, whichever occurs first, after the most recent inspection.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
18 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 19

Group 2, Configuration 2-3:
Table 5: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,200
flight cycles or
17,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 8,400 to-
tal flight cycles
or 56,400 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (c)
--CONDITION 13, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)
CONDITION 13: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 13, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occur first.
CONDITION 13, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)
CONDITION 13, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
19 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 20

Group 2, Configuration 2-3:
Table 5: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
--Within 2,200
flight cycles or
17,600 flight
hours, whichever
occurs first.
CONDITION 14, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)
CONDITION 14: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 14, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)
2,200 flight cycles
or 17,600 flight
hours, whichever
occurs first.
--CONDITION 14, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)
CONDITION 14, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)
-Before further flight.CONDITION 15, ACTION 1:
Do the right side UWL with
fuselage skin modification in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
CONDITION 15: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 15, ACTION 2:
Do Post Modification inspec-
tions and applicable correc-
tive actions in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 16: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
20 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 21

Group 2, Configuration 2-3:
Table 5: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(c) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,200
flight cycles or 17,600 flight hours, whichever occurs first, after the most recent inspection.
Group 3, Configuration 2, 4:
Table 6: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,000
flight cycles or
16,000 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 8,700 to-
tal flight cycles
or 26,900 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
21 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 22

Group 3, Configuration 2, 4:
Table 6: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (c)
--CONDITION 17, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)
CONDITION 17: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 17, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 17, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 17, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 18, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 18: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 18, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first.
--CONDITION 18, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)
CONDITION 18, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
22 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 23

Group 3, Configuration 2, 4:
Table 6: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 19, ACTION 1:
Do the left side UWL with
fuselage skin modification in
accordance with Revision 2
of Boeing Service Bulletin
777-53-0084.
CONDITION 19: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in Revision
2 of Boeing Service Bulletin 777-
53-0084.
CONDITION 19, ACTION 2:
Do Post Modification inspec-
tions and applicable correc-
tive actions in accordance
with Revision 2 of Boeing
Service Bulletin 777-53-0084.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 20: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 2 of
Boeing Service Bulletin 777-53-0084 is terminating action for this repeat inspection.
(b) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
(c) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,000
flight cycles or 16,000 flight hours, whichever occurs first, after the most recent inspection.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
23 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 24

Group 3, Configuration 2-3:
Table 7: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,000
flight cycles or
16,000 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 8,700 to-
tal flight cycles
or 26,900 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (c)
--CONDITION 21, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)
CONDITION 21: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 21, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 21, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)
CONDITION 21, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
24 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 25

Group 3, Configuration 2-3:
Table 7: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 22, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)
CONDITION 22: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 22, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first.
--CONDITION 22, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)
CONDITION 22, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)
-Before further flight.CONDITION 23, ACTION 1:
Do the right side UWL with
fuselage skin modification in
accordance with Revision 2
of Boeing Service Bulletin
777-53-0084.
CONDITION 23: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in Revision
2 of Boeing Service Bulletin 777-
53-0084.
CONDITION 23, ACTION 2:
Do Post Modification inspec-
tions and applicable correc-
tive actions in accordance
with Revision 2 of Boeing
Service Bulletin 777-53-0084.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 24: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 2 of
Boeing Service Bulletin 777-53-0084 is terminating action for this repeat inspection.
(b) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
25 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 26

Group 3, Configuration 2-3:
Table 7: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(c) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,000
flight cycles or 16,000 flight hours, whichever occurs first, after the most recent inspection.
Group 4, Configuration 2, 4:
Table 8: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,000
flight cycles or
16,000 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,100 to-
tal flight cycles
or 36,600 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
26 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 27

Group 4, Configuration 2, 4:
Table 8: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (e)
--CONDITION 25, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)(b)
CONDITION 25: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 25, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)(b)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 25, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 25, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)(c)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 26, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 26: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 26, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)(c)
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first.
--CONDITION 26, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 26, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
27 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 28

Group 4, Configuration 2, 4:
Table 8: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 27, OPTION 1
(ACTION 1): Do the left side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 27: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 27, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 27, OPTION 2
(ACTION 1): Do the left side
UWL with fuselage skin
modification in accordance
with Revision 2 of Boeing
Service Bulletin 777-53-0084.
(d)
-At the times specified in Revision
2 of Boeing Service Bulletin 777-
53-0084.
CONDITION 27, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 2
of Boeing Service Bulletin
777-53-0084.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 28: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 2 of
Boeing Service Bulletin 777-53-0084 is terminating action for this repeat inspection.
(b) Accomplishment of the left side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
28 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 29

Group 4, Configuration 2, 4:
Table 8: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,000
flight cycles or 16,000 flight hours, whichever occurs first, after the most recent inspection.
Group 4, Configuration 2-3:
Table 9: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,000
flight cycles or
16,000 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,100 to-
tal flight cycles
or 36,600 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
29 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 30

Group 4, Configuration 2-3:
Table 9: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (e)
--CONDITION 29, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 29: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 29, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)(b)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 29, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 29, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)(c)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 30, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 30: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 30, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first.
--CONDITION 30, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 30, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
30 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 31

Group 4, Configuration 2-3:
Table 9: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 31, OPTION 1
(ACTION 1): Do the right side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 31: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARYS.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 31, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 31, OPTION 2
(ACTION 1): Do the right side
UWL with fuselage skin
modification in accordance
with Revision 2 of Boeing
Service Bulletin 777-53-0084.
(d)
-At the times specified in Revision
2 of Boeing Service Bulletin 777-
53-0084.
CONDITION 31, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 2
of Boeing Service Bulletin
777-53-0084.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 32: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 2 of
Boeing Service Bulletin 777-53-0084 is terminating action for this repeat inspection.
(b) Accomplishment of the right side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
31 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 32

Group 4, Configuration 2-3:
Table 9: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,000
flight cycles or 16,000 flight hours, whichever occurs first, after the most recent inspection.
Group 5, Configuration 2, 4:
Table 10: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,000
flight cycles or
16,000 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,100 to-
tal flight cycles
or 36,600 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
32 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 33

Group 5, Configuration 2, 4:
Table 10: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (e)
--CONDITION 33, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)(b)
CONDITION 33: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 33, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)(b)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 33, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 33, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)(c)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 34, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 34: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 34, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)(c)
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first.
--CONDITION 34, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 34, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
33 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 34

Group 5, Configuration 2, 4:
Table 10: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 35, OPTION 1
(ACTION 1): Do the left side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 35: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 35, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 35, OPTION 2
(ACTION 1): Do the left side
UWL with fuselage skin
modification in accordance
with Revision 2 of Boeing
Service Bulletin 777-53-0084.
(d)
-At the times specified in Revision
2 of Boeing Service Bulletin 777-
53-0084.
CONDITION 35, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 2
of Boeing Service Bulletin
777-53-0084.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 36: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 2 of
Boeing Service Bulletin 777-53-0084 is terminating action for this repeat inspection.
(b) Accomplishment of the left side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
34 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 35

Group 5, Configuration 2, 4:
Table 10: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,000
flight cycles or 16,000 flight hours, whichever occurs first, after the most recent inspection.
Group 5, Configuration 2-3:
Table 11: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 2,000
flight cycles or
16,000 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,100 to-
tal flight cycles
or 36,600 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
35 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 36

Group 5, Configuration 2-3:
Table 11: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,500 flight cycles
or 20,000 flight
hours, whichever
occurs first. (e)
--CONDITION 37, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 37: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 37, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)(b)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 37, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 37, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)(c)
--Within 2,000
flight cycles or
16,000 flight
hours, whichever
occurs first.
CONDITION 38, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 38: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 38, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first.
--CONDITION 38, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 38, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
36 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 37

Group 5, Configuration 2-3:
Table 11: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 39, OPTION 1
(ACTION 1): Do the right side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 39: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 39, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 39, OPTION 2
(ACTION 1): Do the right side
UWL with fuselage skin
modification in accordance
with Revision 2 of Boeing
Service Bulletin 777-53-0084.
(d)
-At the times specified in Revision
2 of Boeing Service Bulletin 777-
53-0084.
CONDITION 39, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 2
of Boeing Service Bulletin
777-53-0084.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 40: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 2 of
Boeing Service Bulletin 777-53-0084 is terminating action for this repeat inspection.
(b) Accomplishment of the right side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
37 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 38

Group 5, Configuration 2-3:
Table 11: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 2,000
flight cycles or 16,000 flight hours, whichever occurs first, after the most recent inspection.
Group 6, Configuration 2, 4:
Table 12: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 1,700
flight cycles or
13,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB , whichever
occurs first.
Before 5,000 to-
tal flight cycles
or 40,500 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
38 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 39

Group 6, Configuration 2, 4:
Table 12: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first. (e)
--CONDITION 41, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)(b)
CONDITION 41: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 41, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)(b)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 41, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 41, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)(c)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 42, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 42: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 42, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)(c)
1,700 flight cycles
or 13,600 flight
hours, whichever
occurs first.
--CONDITION 42, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 42, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
39 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 40

Group 6, Configuration 2, 4:
Table 12: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 43, OPTION 1
(ACTION 1): Do the left side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 43: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 43, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 43, OPTION 2
(ACTION 1): Do the left side
UWL with fuselage skin
modification in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
(d)
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 43, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 44: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) Accomplishment of the left side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
40 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 41

Group 6, Configuration 2, 4:
Table 12: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 1,700
flight cycles or 13,600 flight hours, whichever occurs first, after the most recent inspection.
Group 6, Configuration 2-3:
Table 13: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 1,700
flight cycles or
13,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,000 to-
tal flight cycles
or 40,500 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
41 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 42

Group 6, Configuration 2-3:
Table 13: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first. (e)
--CONDITION 45, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 45: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 45, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)(b)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 45, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 45, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)(c)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 46, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 46: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 46, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
1,700 flight cycles
or 13,600 flight
hours, whichever
occurs first.
--CONDITION 46, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 46, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
42 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 43

Group 6, Configuration 2-3:
Table 13: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 47, OPTION 1
(ACTION 1): Do the right side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 47: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 47, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 47, OPTION 2
(ACTION 1): Do the right side
UWL with fuselage skin
modification in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
(d)
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 47, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 48: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) Accomplishment of the right side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
43 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 44

Group 6, Configuration 2-3:
Table 13: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 1,700
flight cycles or 13,600 flight hours, whichever occurs first, after the most recent inspection.
Group 7, Configuration 2, 4:
Table 14: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 1,700
flight cycles or
13,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,000 to-
tal flight cycles
or 40,500 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
44 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 45

Group 7, Configuration 2, 4:
Table 14: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first. (e)
--CONDITION 49, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)(b)
CONDITION 49: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 49, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)(b)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 49, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 49, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)(c)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 50, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 50: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 50, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)(c)
1,700 flight cycles
or 13,600 flight
hours, whichever
occurs first.
--CONDITION 50, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 50, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
45 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 46

Group 7, Configuration 2, 4:
Table 14: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 51, OPTION 1
(ACTION 1): Do the left side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 51: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 51, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 51, OPTION 2
(ACTION 1): Do the left side
UWL with fuselage skin
modification in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
(d)
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 51, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 52: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) Accomplishment of the left side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
46 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 47

Group 7, Configuration 2, 4:
Table 14: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 1,700
flight cycles or 13,600 flight hours, whichever occurs first, after the most recent inspection.
Group 7, Configuration 2-3:
Table 15: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 1,700
flight cycles or
13,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,000 to-
tal flight cycles
or 40,500 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
47 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 48

Group 7, Configuration 2-3:
Table 15: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first. (e)
--CONDITION 53, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 53: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 53, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)(b)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 53, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 53, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)(c)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 54, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 54: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 54, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
1,700 flight cycles
or 13,600 flight
hours, whichever
occurs first.
--CONDITION 54, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 54, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
48 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 49

Group 7, Configuration 2-3:
Table 15: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 55, OPTION 1
(ACTION 1): Do the right side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 55: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 55, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 55, OPTION 2
(ACTION 1): Do the right side
UWL with fuselage skin
modification in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
(d)
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 55, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 56: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) Accomplishment of the right side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
49 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 50

Group 7, Configuration 2-3:
Table 15: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 1,700
flight cycles or 13,600 flight hours, whichever occurs first, after the most recent inspection.
Group 8, Configuration 2, 4:
Table 16: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 1,700
flight cycles or
13,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,000 to-
tal flight cycles
or 30,200 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the left side fuselage skin for
any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the left side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
50 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 51

Group 8, Configuration 2, 4:
Table 16: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first. (e)
--CONDITION 57, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
left side fuselage skin for any
crack. (a)(b)
CONDITION 57: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 57, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
left side fuselage skin for any
crack. (a)(b)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 57, OPTION 2
(ACTION 1): Do the internal
DET inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 57, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the left side fuselage skin for
any crack. (a)(b)(c)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 58, OPTION 1
(ACTION 1): Do the external
DET Inspection of the left
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 58: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 58, OPTION 1
(ACTION 2): Do the external
UT Inspection of the left side
fuselage skin for any crack.
(a)(b)(c)
1,700 flight cycles
or 13,600 flight
hours, whichever
occurs first.
--CONDITION 58, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the left
side fuselage skin for any
crack. (a)(b)
CONDITION 58, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the left side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
51 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 52

Group 8, Configuration 2, 4:
Table 16: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 59, OPTION 1
(ACTION 1): Do the left side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 59: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 59, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 59, OPTION 2
(ACTION 1): Do the left side
UWL with fuselage skin
modification in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
(d)
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 59, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 60: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the left side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) Accomplishment of the left side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
52 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 53

Group 8, Configuration 2, 4:
Table 16: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 1,700
flight cycles or 13,600 flight hours, whichever occurs first, after the most recent inspection.
Group 8, Configuration 2-3:
Table 17: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Within 24
months or 1,700
flight cycles or
13,600 flight
hours after the
Original Issue
date of Require-
ments Bulletin
777-53A0100
RB, whichever
occurs first.
Before 5,000 to-
tal flight cycles
or 30,200 total
flight hours,
whichever oc-
curs first.
OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the right side
fuselage skin for any crack.
All Airplanes.
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the right side
fuselage skin for any crack.
OPTION 2 (ACTION 1): Do
an internal DET Inspection of
the right side fuselage skin
for any crack.
OPTION 2 (ACTION 2): Do
an internal surface High Fre-
quency Eddy Current (HFEC)
Inspection of the right side
fuselage skin for any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
53 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 54

Group 8, Configuration 2-3:
Table 17: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
2,000 flight cycles
or 16,000 flight
hours, whichever
occurs first. (e)
--CONDITION 61, OPTION 1
(ACTION 1): Repeat the ex-
ternal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 61: NO
CRACK FOUND AS A
RESULT OF OPTION
1 INSPECTIONS.
CONDITION 61, OPTION 1
(ACTION 2): Repeat the ex-
ternal UT Inspection of the
right side fuselage skin for
any crack. (a)(b)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 61, OPTION 2
(ACTION 1): Do the internal
DET inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 61, OPTION 2
(ACTION 2): Do the internal
surface HFEC Inspection of
the right side fuselage skin
for any crack. (a)(b)(c)
--Within 1,700
flight cycles or
13,600 flight
hours, whichever
occurs first.
CONDITION 62, OPTION 1
(ACTION 1): Do the external
DET Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
CONDITION 62: NO
CRACK FOUND AS A
RESULT OF OPTION
2 INSPECTIONS.
CONDITION 62, OPTION 1
(ACTION 2): Do the external
UT Inspection of the right
side fuselage skin for any
crack. (a)(b)(c)
1,700 flight cycles
or 13,600 flight
hours, whichever
occurs first.
--CONDITION 62, OPTION 2
(ACTION 1): Repeat the inter-
nal DET Inspection of the
right side fuselage skin for
any crack. (a)(b)
CONDITION 62, OPTION 2
(ACTION 2): Repeat the inter-
nal surface HFEC Inspection
of the right side fuselage skin
for any crack. (a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
54 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 55

Group 8, Configuration 2-3:
Table 17: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 63, OPTION 1
(ACTION 1): Do the right side
front spar lower chord modifi-
cation in accordance with the
original issue of Boeing Alert
Requirements Bulletin 777-
57A0122 RB. (d)
CONDITION 63: ANY
CRACK FOUND ON
OR WITHIN CRACK
BOUNDARY.
-At the times specified in the original
issue of Boeing Alert Requirements
Bulletin 777-57A0122 RB.
CONDITION 63, OPTION 1
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with the original
issue of Boeing Alert Require-
ments Bulletin 777-57A0122
RB.
-Before further flight.CONDITION 63, OPTION 2
(ACTION 1): Do the right side
UWL with fuselage skin
modification in accordance
with Revision 1 of Boeing
Service Bulletin 777-53-0087.
(d)
-At the times specified in Revision
1 of Boeing Service Bulletin 777-
53-0087.
CONDITION 63, OPTION 2
(ACTION 2): Do Post Modifi-
cation inspections and appli-
cable corrective actions in
accordance with Revision 1
of Boeing Service Bulletin
777-53-0087.
-Before further flight.Contact The Boeing Compa-
ny for repair instructions and
do the repair.
CONDITION 64: ANY
CRACK FOUND OUT-
SIDE OF CRACK
BOUNDARY.
(a) Accomplishment of the right side UWL with fuselage skin modification in accordance with Revision 1 of
Boeing Service Bulletin 777-53-0087 is terminating action for this repeat inspection.
(b) Accomplishment of the right side front spar lower chord modification in accordance with the original issue
of Boeing Alert Requirements Bulletin 777-57A0122 RB is terminating action for this repeat inspection.
(c) When switching inspection method, the lower inspection interval between the external UT inspection
method and the internal HFEC inspection method is required in order to maintain airplane level safety.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
55 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 56

Group 8, Configuration 2-3:
Table 17: Right Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Repeat Interval
(Not to Exceed)
Boeing Recommended Compli-
ance Time (Whichever Occurs
Later)
ActionCondition
(d) Requirements Bulletin 777-57A0122 RB is the preferred modification because it provides safety mitigation
requirements on the wing structures.
(e) For airplanes that switched inspection methods at any time, the next inspection must be done Within 1,700
flight cycles or 13,600 flight hours, whichever occurs first, after the most recent inspection.
4. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
56 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 57

5.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate
Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated
by an Airworthiness Directive (AD), then all applicable requirements specified in the
RB must be done. For the related SB, some locations are marked RC Start and RC
End to identify the requirements that are restated from the RB. For the related SB,
the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD.
Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including substeps and identified figures.
For the related SB, the steps not between RC Start and RC End may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC; this is provided that the
steps between RC Start and RC End, including sub-steps and identified figures, can
still be done as specified, and the airplane can be put back in an airworthy condition.
Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes
used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure
that the information between "RC Start" and "RC End" in the SB are identical to the
information in the same sections (Compliance, Work Instructions...) of the RB which
the SB refers to as the related document.
3. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
4. Boeing Service Letter 777-SL-51-013, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 777 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 777
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
57 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 58

6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
7. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
8. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
9. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
10. A Detailed (DET) Inspection is defined as: An intensive examination of a specific
item, installation or assembly to detect damage, failure or irregularity. This could
include tactile assessment in which a component or assembly can be checked for
tightness/security. Available lighting is normally supplemented with a direct source
of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors
and magnifying lenses may be necessary. Surface cleaning and elaborate access
procedures may be required.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION,
do all of the ACTION numbers for that CONDITION or OPTION.
B. WORK INSTRUCTIONS
Actions Required for Compliance
1. Requirements
Group 1-8, Configuration 1:
Table 1: No Further Action Required
Refer to the listed proce-
dures in SB 777-53A0100
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of ComplianceActionCondition
--No further action required.All Airplanes.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
58 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 59

Group 1, Configuration 2, 4:
Table 2: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Refer to the listed proce-
dures in SB 777-53A0100
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 1: LEFT SIDE -
OPEN EXTERNAL ACCESS
-OPTION 1 (ACTION 1): Do
an external Detailed (DET)
Inspection of the left side
fuselage skin for any
crack.
All Airplanes.
-FIGURE 1
OPTION 1 (ACTION 2): Do
an external Ultrasonic (UT)
Inspection of the left side
fuselage skin for any
crack.
Do PART 2: LEFT SIDE -
OPEN INTERNAL ACCESS
-OPTION 2 (ACTION 1): Do
an internal DET Inspection
of the left side fuselage
skin for any crack. -FIGURE 2
OPTION 2 (ACTION 2): Do
an internal surface High
Frequency Eddy Current
(HFEC) Inspection of the
left side fuselage skin for
any crack.
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
59 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

### Page 60

Group 1, Configuration 2, 4:
Table 2: Left Side - Inspection of Fuselage Skin Common to the Underwing Longeron (UWL) between
STA 1014 and STA 1035, at Stringer S-37
Refer to the listed proce-
dures in SB 777-53A0100
Original Issue or later ap-
proved revisions as an ac-
cepted procedure
Method of Compli-
ance
ActionCondition
Do PART 3: LEFT SIDE -
CLOSE EXTERNAL ACCESS
-CONDITION 1, OPTION 1
(ACTION 1): Repeat the
external DET Inspection of
the left side fuselage skin
for any crack. (a)
CONDITION 1: NO
CRACK FOUND AS A
RESULT OF OPTION 1
INSPECTIONS. -FIGURE 1
CONDITION 1, OPTION 1
(ACTION 2): Repeat the
external UT Inspection of
the left side fuselage skin
for any crack. (a)
Do PART 3: LEFT SIDE -
CLOSE EXTERNAL ACCESS
-CONDITION 1, OPTION 2
(ACTION 1): Do the inter-
nal DET Inspection of the
left side fuselage skin for
any crack. (a)(b)
-FIGURE 2
CONDITION 1, OPTION 2
(ACTION 2): Do the inter-
nal surface HFEC Inspec-
tion of the left side fuse-
lage skin for any crack.
(a)(b)
Export Controlled ECCN: 9E991
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 16, 2023
777-53A0100 RB
60 of 141
REQUIREMENTS BULLETIN 777-53A0100
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/777-53a0100-rb/file/6e0ef17defb4.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
