# Boeing Alert Service Bulletin 777-54A0024: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0026; AD 2011-09-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-54A0024](https://openairdocs.org/service-documents/boeing/777-54a0024.md)
- Title as filed: U.S. DOT/FAA - Boeing Service Bulletin
- Pages: 124
- PDF: https://openairdocs.org/files/sha256/35/99/3599567b5c48f7a490207a3dc6c7990f4173a4d1e8080bedcd8e6b40f8de2a80
- Page: https://openairdocs.org/service-documents/boeing/777-54a0024/file/3599567b5c48

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
Number: 777-54A0024
Original Issue: April 01, 2010
Revision 1: November 04, 2010
ATA System: 5454
SUBJECT: NACELLES / PYLONS - Strut Fireseal and Firewall - Pratt and Whitney Engines -
System Disconnect Assembly - Inspection and Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2010 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
1 of 124
2.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
2 of 124
BOEING SERVICE BULLETIN 777-54A0024
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 1 4
B. Concurrent Requirements ...................................... 1 4
C. Reason ................................................ 1 4
D. Description .............................................. 1 5
E. Compliance .............................................. 1 6
F. Approval ............................................... 1 8
G. Manpower .............................................. 1 8
H. Weight and Balance Changes .................................... 2 1
I. Electrical Load Data ......................................... 2 1
J. References .............................................. 2 1
1. Existing Data .......................................... 2 1
2. Data supplied with this Service Bulletin ............................ 2 1
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 1
K. Publications Affected ........................................ 2 1
L. Interchangeability and Intermixability of Parts ........................... 2 2
2. MATERIAL INFORMATION ........................................ 2 3
A. Material - Price and Availability ................................... 2 3
B. Industry Support Information .................................... 2 3
C. Parts Necessary For Each Airplane ................................. 2 3
1. Kits/Parts ............................................ 2 3
2. Parts and Materials Supplied by the Operator ........................ 2 6
3. Parts Modified and Reidentified ................................ 2 6
4. Parts Removed and Not Replaced .............................. 2 7
D. Parts Necessary to Change Spares ................................. 2 7
E. Special Tooling - Price and Availability ............................... 2 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 9
A. GENERAL INFORMATION ..................................... 2 9
B. WORK INSTRUCTIONS ....................................... 3 0
FIGURE 1: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION . . 36
FIGURE 2: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION . . 39
FIGURE 3: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - DET INSPECTION ........ 4 2
FIGURE 4: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERIOR DET INSPECTION . . 46
FIGURE 5: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - EXTERIOR DET INSPECTION . 50
FIGURE 6: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - EXTERIOR DET INSPECTION . 52
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION .......... 5 4
FIGURE 8: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - HYDRAULIC SIDE REMOVALS . 61
FIGURE 9: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - ELECTRICAL SIDE REMOVALS . 64
FIGURE 10: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - REPLACEMENT ......... 6 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
3 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 4

FIGURE 11: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - ELECTRICAL SIDE INSTALLATION
.................................................. 7 7
FIGURE 12: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - HYDRAULIC SIDE INSTALLATION
.................................................. 8 3
FIGURE 13: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION .......... 8 9
FIGURE 14: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - HYDRAULIC SIDE REMOVALS . 96
FIGURE 15: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - ELECTRICAL SIDE REMOVALS . 99
FIGURE 16: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - REPLACEMENT ......... 1 0 3
FIGURE 17: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - ELECTRICAL SIDE INSTALLATION
................................................. 1 1 2
FIGURE 18: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - HYDRAULIC SIDE INSTALLATION
................................................. 1 1 8
APPENDIX A: SCOPE OF WORK ...................................... 1 2 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
4 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 5

Commercial 
Airplanes
777
Service Bulletin
Revision Transmittal SheetNumber: 777-54A0024Original Issue: April 01, 2010
Revision 1: November 04, 2010
ATA System: 5454
SUBJECT: NACELLES / PYLONS - Strut Fireseal and Firewall - Pratt and Whitney Engines -
System Disconnect Assembly - Inspection and Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on the airplane(s) changed in accordance with the original issue of this service
bulletin.
REASON FOR REVISION
As a part of a service bulletin validation program, Part 4 was completed on airplane WC117 by Service Bulletin
777-54A0024 Original Issue before the release of Revision 1 of this service bulletin. The change completed on
airplane WC117 by Service Bulletin 777-54A0024 Original Issue is equivalent to the release of Revision 1 of
this service bulletin.
This revision is sent to:
1. Revise the threshold to accomplish Part 4 - System Disconnect Assembly Replacement (Terminating Action)
after hydraulic coking and heat damage is found in Condition 2B. The original threshold was from the time
that hydraulic contamination was found, when it should have been from the time hydraulic fluid coking and/or
heat damage is found. Condition 2A allows for repeat inspections if hydraulic fluid contamination is found
and no hydraulic fluid coking and/or heat damage is found at the same interval as the threshold for
accomplishing Part 4 in Condition 2B. Therefore, it is possible that the threshold from when accomplishment
of Part 4 is required in Condition 2B would be exceeded by the time hydraulic fluid coking and/or heat
damage was found. The intent was to require the accomplish Part 4 within the threshold after Condition 2B
is found.
2. Revise a marker in the kit. A typographical error in a part number in the kit resulted in the wrong marker in
the kit and the wrong callout in the service bulletin.
3. Revise circle note for installing the left side drain fitting for the strut no. 2 disconnect box. The same circle
note was inadvertently used for both the left and right side drain fittings when two separate circle notes
were required.
4. Revise the requirement to jack the airplane to level the airplane. The requirement for the leveling compound
is to level the airplane. In many cases the airplane can be leveled without jacking.
5. Clarify that the shims between the disconnect box and the strut lower spar are only required if necessary
to meet the pull-up requirements.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
5 of 124

### Page 6

6. Add application of prepack of sealant between the "chimney" and the lower spar to match original installation.
7. Add the rubber seal blocks for the power feeder cables to the operator supplied materials. During the
validation, the rubber seal blocks were damaged.
8. Increased the amount of sealant, BMS 5-63 specified in the operator supplied materials to match the quantity
needed during the validation.
9. Replace the statements in access and restoration with new General Note. Add new General Note describing
access used in the validation.
The following sections were changed.
1. Summary.
Part 4 - System Disconnect Assembly Replacement (Terminating Action) - Revised step from jack airplane
to level airplane.
2. Planning Information.
a. Paragraph 1.D., Description - Part 4 - System Disconnect Assembly Replacement (Terminating Action)
- Revised step from jack airplane to level airplane.
b. Paragraph 1.E., Compliance - Revised threshold for accomplishment of Part 4 in Condition 2B.
c. Paragraph 1.G., Manpower - Part 4 - System Disconnect Assembly Replacement (Terminating Action)
- Revised step from jack airplane to level airplane.
3. Material Information.
a. Paragraph 2.A., Material - Price and Availability - Added rubber seal blocks for the power feeder cables.
b. Paragraph 2.C.1., Kits/Parts.
(1) Revised marker part number.
(2) Added rubber seal blocks for the power feeder cables.
c. Paragraph 2.C.2., Parts and Materials Supplied by the Operator - Increased the amount of sealant,
BMS 5-63.
4. Accomplishment Instructions.
a. Paragraph 3.A., General Information.
(1) General Note 10. - Added new note to allow revised access.
(2) General Note 13. - Added new note to provide information on the condition of access on the
validation airplane.
b. Paragraph 3.B., Work Instructions.
(1) Part 4 - System Disconnect Assembly Replacement (Terminating Action).
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
6 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 7

(a) Deleted access and restoration notes from steps 2 and 6. This information is now in Paragraph
3.A., General Information, General Note 10.
(b) Changed jacking of the airplane to level the airplane in steps 3 and 5.
(2) Figures.
(a) FIGURE 7 - Step Table, Step 8 - Changed marker part number.
(b) FIGURE 10.
1) Illustration - Section A-A - Added location where prepack of sealant is required.
2) Step Table.
a) Step 4 and Step 7 - Shims A, B, C, and D - Added shim if and as required to obtain
required pull-up.
b) Step 7 - Added application of prepack sealant between chimney and strut lower spar.
(c) FIGURE 13 - Illustration - View D - Revised circle note.
1) Illustration - View D - Revised circle note for drain fitting.
2) Step Table, Step 8 - Changed marker part number.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
April 01, 2010Original Issue:
November 04, 2010Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
7 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
8 of 124
BOEING SERVICE BULLETIN 777-54A0024
BLANK PAGE

### Page 9

Commercial 
Airplanes
777
Service Bulletin
SummaryNumber: 777-54A0024Original Issue: April 01, 2010
Revision 1: November 04, 2010
ATA System: 5454
SUBJECT: NACELLES / PYLONS - Strut Fireseal and Firewall - Pratt and Whitney Engines -
System Disconnect Assembly - Inspection and Replacement
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of the inspections and replacement of the system disconnect assembly will detect and prevent
cracking of the system disconnect assembly. Cracks in the system disconnect area may allow fire in the engine
area to enter the strut. This could result in an uncontained engine strut fire.
Several operators have reported system disconnect boxes that have been contaminated with hydraulic fluid as
detailed in service bulletin 777-54-0023. In addition, 1 operator has reported finding cracks in the system
disconnect assembly bulkheads and lower skin panel. Subsequent analysis at Boeing found hydrogen
embrittlement of the system disconnect assembly bulkheads and lower skin panel. The system disconnect
assembly is made from titanium and is located near the hot engine core of the engine where temperatures can
exceed 270 degrees Fahrenheit. The presence of hydraulic fluid and temperature above 270 degrees Fahrenheit
can result in hydrogen embrittlement of the titanium system disconnect assembly. Hydrogen embrittlement
combined with a high sonic vibration environment can result in cracking of the system disconnect assembly.
The system disconnect assembly is a box where hydraulic, fuel, and electrical connections are made between
the engine and the strut. This box acts as firewall between the engine compartment and the strut. The engine
compartment has a dedicated fire extinguishing system while the strut does not. The strut is considered a
flammable leakage zone where flammable fluids may be present. These fluids are subsequently drained from
the strut and system disconnect box. Cracking of the system disconnect assembly could allow a fire into the
strut if a fire was present in the engine compartment. If a fire was able to enter the strut and flammable fluid was
present, and since the strut does not have a dedicated fire suppression system, it is possible an uncontained
engine strut fire could result.
Inspection of the system disconnect assembly will show the presence of coked hydraulic fluid or cracking. The
presence of coked hydraulic fluid is an indication that hydrogen embrittlement may have occurred. Replacement
of the titanium system disconnect assembly with an Inconel system disconnect assembly will eliminate the
potential for hydrogen embrittlement and subsequent cracking.
Boeing Service Related Problem (SRP) 777-SRP-54-0125 is related to this service bulletin.
ACTION (PRR 62777-62S)
Part 1 - Hydraulic Fluid Contamination Inspection
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
9 of 124

### Page 10

Open the thrust reversers. Remove the thermal blankets. Remove the cover plates and do a General Visual
Inspection (GVI) of the interior of the strut disconnect assembly for hydraulic fluid contamination. Install the cover
plate. Install the thermal blankets. Close the thrust reversers.
Part 2 - Interior Detailed Inspection (DET)
Open the thrust reversers. Remove the thermal blankets. Remove the cover plates and do a Detailed Inspection
(DET) of the interior of strut disconnect assembly for hydraulic fluid coking, heat discoloration, cracks, and
etching or pitting. Install the cover plate. Install the thermal blankets. Close the thrust reversers.
Part 3 - Exterior Detailed Inspection (DET)
Open the thrust reversers. Remove the thermal blankets. Do a DET of the exterior of the strut disconnect
assembly for cracks. Install the thermal blankets. Close the thrust reversers.
Part 4 - System Disconnect Assembly Replacement (Terminating Action)
Prepare the new system disconnect assembly for installation (apply sealant, install drain fittings and drain
screens, install markers). Remove the engine. Remove the thrust reverser. Remove the access panels. Remove
the precooler. Remove the thermal blankets. Level airplane. Replace system disconnect assembly. Lower
airplane from jacks, if required. Install access panels. Install thermal blankets. Install precooler. Install thrust
reverser. Install engine.
EFFECTIVITY
777-200 and -300 Airplanes powered by Pratt and Whitney (PW) Engines. Refer to Paragraph 1.A., Effectivity,
for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of October 25, 2007. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Elapsed HoursTotal Task Hours
10.2010.20Part 1 - Hydraulic Fluid Contamination
Inspection
10.2010.20Part 2 - Interior Detailed Inspection
(DET)
15.0015.00Part 3 - Exterior Detailed Inspection
(DET)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
10 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 11

Elapsed HoursTotal Task Hours
117.50296.00Part 4 - System Disconnect Assembly
Replacement (Terminating Action)
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
11 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 12 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
PART 1:
DO A GVI OF THE INTERIOR
FOR HYDRAULIC FLUID
CONTAMINATION
PART 2:
DO A DET OF THE INTERIOR
FOR HYDRAULIC FLUID
CRACKS, AND ETCHING OR  COKING, HEAT DAMAGE
PITTING.
STRUT
LOWER  PART 4:
SPAR  REPLACE SYSTEM
DISCONNECT ASSEMBLY
PART 3:
DO A DET OF THE
EXTERIOR FOR CRACKS
Original Issue: April 01, 2010
Revision 1: November 04, 2010  777-54A0024
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  12 of 124

### Page 13

Commercial 
Airplanes
777
Service Bulletin
Number: 777-54A0024
Original Issue: April 01, 2010
Revision 1: November 04, 2010
ATA System: 5454
SUBJECT: NACELLES / PYLONS - Strut Fireseal and Firewall - Pratt and Whitney Engines -
System Disconnect Assembly - Inspection and Replacement
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 62777-62S for data about this change.
Refer to Service Bulletin Index Document D624W001 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
777-200 and -300 Airplanes line position 2 through 738 powered by
Pratt and Whitney (PW) Engines.
-1
Airplane Models:
777-200, 777-300
GroupVariable Number
1WA002 - WA017
1WA131 - WA137
1WA171 - WA175
1WA206 - WA212
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281 - WA283
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
13 of 124

### Page 14

GroupVariable Number
1WA301 - WA304
1WB051 - WB088
1WB131 - WB148
1WB151 - WB155
1WB366 - WB368
1WB481 - WB484
1WB531 - WB537
1WB551 - WB554
1WB591 - WB597
1WC111 - WC120
1WC371 - WC374
1WC506 - WC508
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of the inspections and replacement of the system disconnect assembly will detect
and prevent cracking of the system disconnect assembly. Cracks in the system disconnect area may
allow fire in the engine area to enter the strut. This could result in an uncontained engine strut fire.
Several operators have reported system disconnect boxes that have been contaminated with hydraulic
fluid as detailed in service bulletin 777-54-0023. In addition, 1 operator has reported finding cracks in
the system disconnect assembly bulkheads and lower skin panel. Subsequent analysis at Boeing found
hydrogen embrittlement of the system disconnect assembly bulkheads and lower skin panel. The
system disconnect assembly is made from titanium and is located near the hot engine core of the
engine where temperatures can exceed 270 degrees Fahrenheit. The presence of hydraulic fluid and
temperature above 270 degrees Fahrenheit can result in hydrogen embrittlement of the titanium system
disconnect assembly. Hydrogen embrittlement combined with a high sonic vibration environment can
result in cracking of the system disconnect assembly. The system disconnect assembly is a box where
hydraulic, fuel, and electrical connections are made between the engine and the strut. This box acts
as firewall between the engine compartment and the strut. The engine compartment has a dedicated
fire extinguishing system while the strut does not. The strut is considered a flammable leakage zone
where flammable fluids may be present. These fluids are subsequently drained from the strut and
system disconnect box. Cracking of the system disconnect assembly could allow a fire into the strut if
a fire was present in the engine compartment. If a fire was able to enter the strut and flammable fluid
was present, and since the strut does not have a dedicated fire suppression system, it is possible an
uncontained engine strut fire could result.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
14 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 15

Inspection of the system disconnect assembly will show the presence of coked hydraulic fluid or cracking.
The presence of coked hydraulic fluid is an indication that hydrogen embrittlement may have occurred.
Replacement of the titanium system disconnect assembly with an Inconel system disconnect assembly
will eliminate the potential for hydrogen embrittlement and subsequent cracking.
Boeing Service Related Problem (SRP) 777-SRP-54-0125 is related to this service bulletin.
Revision 1 is sent to:
1. Revise the threshold to accomplish Part 4 - System Disconnect Assembly Replacement (Terminating
Action) after hydraulic coking and heat damage is found in Condition 2B. The original threshold
was from the time that hydraulic contamination was found, when it should have been from the time
hydraulic fluid coking and/or heat damage is found. Condition 2A allows for repeat inspections if
hydraulic fluid contamination is found and no hydraulic fluid coking and/or heat damage is found
at the same interval as the threshold for accomplishing Part 4 in Condition 2B. Therefore, it is
possible that the threshold from when accomplishment of Part 4 is required in Condition 2B would
be exceeded by the time hydraulic fluid coking and/or heat damage was found. The intent was to
require the accomplish Part 4 within the threshold after Condition 2B is found.
2. Revise a marker in the kit. A typographical error in a part number in the kit resulted in the wrong
marker in the kit and the wrong callout in the service bulletin.
3. Revise circle note for installing the left side drain fitting for the strut no. 2 disconnect box. The
same circle note was inadvertently used for both the left and right side drain fittings when two
separate circle notes were required.
4. Revise the requirement to jack the airplane to level the airplane. The requirement for the leveling
compound is to level the airplane. In many cases the airplane can be leveled without jacking.
5. Clarify that the shims between the disconnect box and the strut lower spar are only required if
necessary to meet the pull-up requirements.
6. Add application of prepack of sealant between the "chimney" and the lower spar to match original
installation.
7. Add the rubber seal blocks for the power feeder cables to the operator supplied materials. During
the validation, the rubber seal blocks were damaged.
8. Increased the amount of sealant, BMS 5-63 specified in the operator supplied materials to match
the quantity needed during the validation.
9. Replace the statements in access and restoration with new General Note. Add new General Note
describing access used in the validation.
D. Description
Part 1 - Hydraulic Fluid Contamination Inspection
Open the thrust reversers. Remove the thermal blankets. Remove the cover plates and do a General
Visual Inspection (GVI) of the interior of the strut disconnect assembly for hydraulic fluid contamination.
Install the cover plate. Install the thermal blankets. Close the thrust reversers.
Part 2 - Interior Detailed Inspection (DET)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
15 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 16

Open the thrust reversers. Remove the thermal blankets. Remove the cover plates and do a Detailed
Inspection (DET) of the interior of strut disconnect assembly for hydraulic fluid coking, heat discoloration,
cracks, and etching or pitting. Install the cover plate. Install the thermal blankets. Close the thrust
reversers.
Part 3 - Exterior Detailed Inspection (DET)
Open the thrust reversers. Remove the thermal blankets. Do a DET of the exterior of the strut disconnect
assembly for cracks. Install the thermal blankets. Close the thrust reverser.
Part 4 - System Disconnect Assembly Replacement (Terminating Action)
Prepare the new system disconnect assembly for installation (apply sealant, install drain fittings and
drain screens, install markers). Remove the engine. Remove the thrust reverser. Remove the access
panels. Remove the precooler. Remove the thermal blankets. Level airplane. Replace system disconnect
assembly, if required. Lower airplane from jacks. Install access panels. Install thermal blankets. Install
precooler. Install thrust reverser. Install engine.
No more work is necessary on the airplane(s) changed in accordance with the original issue of this
service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
432, 442777-200, 777-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Accomplish the actions in Table 1 as given in Paragraph 3., Accomplishment Instructions.
Accomplish the actions and evaluate the conditions in Table 1 separately for each system disconnect
assembly.
Table 1: System Disconnect Assembly Inspection and Replacement
Repeat Interval (Not
to Exceed)
Compliance TimeAction (a)Condition
-Within 12 Months
after the original is-
sue date of this
service bulletin.
Do a General Visual Inspection
(GVI) of the interior of the strut
disconnect assembly for hy-
draulic fluid contamination in
accordance with Part 1 - Hy-
draulic Fluid Contamination In-
spection.
All Airplanes
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
16 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 17

Table 1: System Disconnect Assembly Inspection and Replacement
Repeat Interval (Not
to Exceed)
Compliance TimeAction (a)Condition
6000 Flight-cycles or
750 Days, whichever
occurs first.
-Repeat GVI of the interior of the
strut disconnect assembly for
hydraulic fluid contamination in
accordance with Part 1 - Hy-
draulic Fluid Contamination In-
spection.
Condition 1 -
No hydraulic fluid contamination
is found.
-Before further
flight.
Do a Detailed Inspection (DET)
of the interior of the strut discon-
nect assembly for hydraulic fluid
coking, heat discoloration,
cracks, and etching or pitting in
accordance with Part 2 - Interior
Detailed Inspection (DET).
Condition 2 -
Hydraulic fluid contamination is
found.
6000 Flight-cycles or
750 Days, whichever
occurs first.
-Repeat DET of the strut discon-
nect assembly for hydraulic fluid
coking, heat discoloration,
cracks, and etching or pitting in
accordance with Part 2 - Interior
Detailed Inspection (DET).
Condition 2A -
1) No hydraulic fluid coking is
found; and
2) No heat discoloration is
found; and
3) No crack is found; and
4) No etching or pitting is found.
300 Flight-cycles.Within 300 Flight-
cycles.
Do a DET of the exterior of the
strut disconnect assembly for
cracks in accordance with Part
3 - Exterior Detailed Inspection
(DET) and repeat at the interval
shown.
Condition 2B -
1) Hydraulic fluid coking and/or
heat discoloration is found; and
2) No crack is found; and
3) No etching or pitting is found.
And
-Within 6000 Flight-
cycles or 750 Days
after hydraulic fluid
coking and/or heat
discoloration was
found, whichever
occurs first.
Do Part 4 - System Disconnect
Assembly Replacement (Termi-
nating Action).
Before further
flight.
Do Part 4 - System Disconnect
Assembly Replacement (Termi-
nating Action).
Condition 3 -
1) Any crack is found; or
2) Any etching or pitting is
found.
(a) As an option to Part 1 - Hydraulic Fluid Contamination Inspection, Part 2 - Interior Detailed Inspection
(DET), or Part 3 - Exterior Detailed Inspection (DET), do Part 4 - System Disconnect Assembly Replacement
as Terminating Action.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
17 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 18

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection and replacement
for each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Part 1 - Hydraulic Fluid Contamination Inspection
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.500.501Open Thrust Reverser
0.500.501Remove Thermal Blankets
Inspect
3.103.101...Strut No. 1 - FIGURE 1
3.103.101...Strut No. 2 - FIGURE 2
0.500.501Install Thermal Blankets
0.500.501Close Thrust Reverser
5.105.10TOTAL FOR EACH ENGINE
10.2010.20TOTAL FOR EACH AIRPLANE
Part 2 - Interior Detailed Inspection (DET)
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.500.501Open Thrust Reverser
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
18 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 19

Part 2 - Interior Detailed Inspection (DET)
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.500.501Remove Thermal Blankets
Inspect
3.103.101...Strut No. 1 - FIGURE 3
3.103.101...Strut No. 2 - FIGURE 4
0.500.501Install Thermal Blankets
0.500.501Close Thrust Reverser
5.105.10TOTAL FOR EACH ENGINE
10.2010.20TOTAL FOR EACH AIRPLANE
Part 3 - Exterior Detailed Inspection (DET)
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.500.501Open Thrust Reverser
3.003.001Remove Thermal Blankets
Inspect
0.500.501...Strut No. 1 - FIGURE 5
0.500.501...Strut No. 2 - FIGURE 6
3.003.001Install Thermal Blankets
0.500.501Close Thrust Reverser
7.507.50TOTAL FOR EACH ENGINE
15.0015.00TOTAL FOR EACH AIRPLANE
Part 4 - System Disconnect Assembly Replacement
Elapsed
Hours
Task HoursNumber of
Persons
Task
Prepare the new System Discon-
nect Assembly for Installation
4.258.502...Strut No. 1 - FIGURE 7
4.258.502...Strut No. 1 - FIGURE 13
4.0020.005Remove Engine
4.0016.004Remove Thrust Reverser
0.500.501Remove access Panels
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
19 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 20

Part 4 - System Disconnect Assembly Replacement
Elapsed
Hours
Task HoursNumber of
Persons
Task
5.0010.002Remove Precooler
3.003.001Remove Thermal Blankets
1.005.005Level Airplane
Disconnect Hydraulic Compo-
nents
2.002.001...Strut No. 1 - FIGURE 8
2.002.001...Strut No. 2 - FIGURE 14
Disconnect Electrical Compo-
nents
2.254.502...Strut No. 1 - FIGURE 9
2.254.502...Strut No. 2 - FIGURE 15
Replace System Disconnect As-
sembly
4.509.002...Strut No. 1 - FIGURE 10
4.509.002...Strut No. 2 - FIGURE 16
Connect Electrical Components
4.258.502...Strut No. 1 - FIGURE 11
4.258.502...Strut No. 2 - FIGURE 17
Connect Hydraulic Components
3.503.501...Strut No. 1 - FIGURE 12
3.503.501...Strut No. 2 - FIGURE 18
1.005.005Lower Airplane from Jacks
0.500.501Install Access Panels
3.003.001Install Thermal Blankets
5.0010.002Install Precooler
4.0016.004Install Thrust Reverser
4.0020.005Install Engine
4.008.002Test
59.75153.00TOTAL FOR EACH ENGINE
117.50296.00TOTAL FOR EACH AIRPLANE
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
20 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 21

H. Weight and Balance Changes
Change in Moment (Pound-
Inches)
Change in Weight (Pounds)
+ 28997+ 28
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 62777-62S
b. Boeing Service Related Problem (SRP) 777-SRP-54-0125
c. Standard Overhaul Practices Manual (SOPM) 20-11-03, 20-30-03, 20-44-01, 20-50-05,
20-60-03
d. Standard Wiring Practices Manual (SWPM) 20-10-04, 20-10-11, 20-10-12, 20-10-19, 20-60-01
e. 777 Aircraft Maintenance Manual (AMM) 06-43-00, 08-21-00 , 20-10-09, 28-22-15, 36-11-15,
54-53-01, 54-54-01, 71-00-02, 78-31-00, 78-31-01
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
SYS DISCONNECT INSTL311W3640
This drawing was used to prepare this service bulletin. This drawing is not necessary to make the
specified changes, and is not supplied with this service bulletin. This drawing may not be applicable
to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
54-51777 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
21 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 22

Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
22 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 23

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane as shown
below. If there is a limit to the quantity (QTY) of available kits, a supply sequence is given by Spares.
More kits become available as shown in the Reorder Lead Time (ROLT). ROLT is calculated from the
date Boeing gets the purchase order.
Unit Price thru
Jul 31/11
ROLT (Weeks)NameKit Number / Part
$ 122,617.0050TOP KIT - PW ENGINE STRUT
DISCONNECT BOX - RE-
PLACEMENT
005W3393-1
Contact Boeing
Spares
13RUBBER BLOCK312W5220-4
Contact Boeing
Spares
11RUBBER BLOCK312W5220-6
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
After the Unit Price date, new price and ROLT data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Mail to:
Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
B. Industry Support Information
Boeing warranty remedies are available for 777 airplanes in warranty as of October 25, 2007. For task
hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable numbers in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
23 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 24

NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
Figure Kit
18161312107Top Kit
111111005W3393-1
ALL
KIT 005W3393-1
NOTES
Existing Part
NumberName
Figure
New Part Number
18161312107
QTY
SHIM22311W3003-25
SHIM22311W3003-26
SHIM22311W3003-27
SHIM11311W3003-29
DRAIN SCREEN11311W3011-5
DRAIN SCREEN11311W3011-6
DRAIN FITTING11311W3637-1
DRAIN FITTING11311W3637-3
SYSTEM DISCON-
NECT - ASSEM-
BLY
11311W3641-37
BRACKET11311W3648-76
NUT, TUBE,
BULKHEAD
11AS5178J06
NUT, TUBE,
BULKHEAD
11AS5178J12
MARKER,POS 111BAC27TPP0074
MARKER, POS 211BAC27TPP0075
MARKER,POS 311BAC27TPP0076
MARKER,POS 411BAC27TPP0077
MARKER,POS 511BAC27TPP0078
MARKER, POS 611BAC27TPP0079
MARKER,POS 711BAC27TPP0080
MARKER,POS 811BAC27TPP0532
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
24 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 25

ALL
KIT 005W3393-1
NOTES
Existing Part
NumberName
Figure
New Part Number
18161312107
QTY
MARKER,POS 911BAC27TPP0533
MARKER,POS 1011BAC27TPP0534
MARKER,POS 1111BAC27TPP0535
MARKER11BAC27WPP38
BOLT44BACB30FM8AK9
BOLT44BACB30MB6AK4
NUT, SELF-LOCK,
HEX
44BACN10YT3CSA
NUT, SELF-LOCK,
HEX
44BACN10YT4CD
WASHER44BACW10EG6CU
WASHER44BACW10EG8CU
PACKING, O-RING11M25988/1-135
PACKING, O-RING11M25988/1-906
PACKING, PRE-
FORMED
22MS29513-330
WASHER, PLAIN11NAS1149C0932R
WASHER22NAS1149C1790R
NotesNameQTYPart Number/ Specification
(a)RUBBER
BLOCK
4312W5220-4
(b)RUBBER
BLOCK
4312W5220-6
(a) Seal for the IDG power feed cables, if damaged during removal. Airplanes
WA002-WA013, WA131-WA133, WA171-WA172. Contact Boeing Spares.
(b) Seal for the IDG power feed cables, if damaged during removal. Airplanes
WA014-WA017, WA134-WA137, WA173-WA175, WA206-WA212, WA221-
WA223, WA231-WA232, WA241-WA250, WA261-WA266, WA281-WA283,
WA301-WA304, WB051-WB088, WB131-WB148, WB151-WB155, WB366-
WB368, WB481-WB484, WB531-WB537, WB551-WB554, WB591-WB597,
WC111-WC120, WC371-WC374, WC506-WC508. Contact Boeing Spares.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
25 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 26

2. Parts and Materials Supplied by the Operator
120 Oz
NotesNameQTYPart Number/ Specification
(a)SEALANT120
Oz
BMS 5-63
(b)Primer, Sili-
cone
1 QtBAC5432, COMPOUND 21 (DC 1200
OR SS4004P 01 P)
(c)Coating, Sky-
drol Resistant
1 PtSOPM 20-44-01, TYPE 41
(b)Leveling Com-
pound, Silicone
2 GalBAC5432, COMPOUND 21 (DC 3110
OR RTV11)
(b)Catalyst1 QtBAC5432, COMPOUND 21 (S TIN NW
OR RTV9950)
(d)Lubricant1 OzNEVER-SEEZ PURE NICKEL SPECIAL
(a)Hydraulic Fluid1 OzBMS 3-11
(d)Grease - Petro-
latum
1 OzVV-P-236
(a) See the Qualified Products List at the end of the Boeing Material Specification
(BMS) for supplier data.
(b) See supplier data below. Leveling Compound, Catalyst, and Primer need to
come from same source to ensure compatibility.
(c) See SOPM 20-44-01 for supplier data.
(d) See SOPM 20-60-03 for supplier data.
– DC 3110 (Leveling Compound), S TIN NW (Catalyst), and DC1200 (Primer)
V71984
Dow Corning Corporation
2200 W Salzburg Rd
Midland Mi 48640 - 8531
Customer Service/www.dowcorning.com
(800) 248-248
– RTV11 (Leveling Compound), RTV9950 (catalyst), and SS4004P 01 P (Primer)
V01139
Momentive Performance Materials Inc.
187 Danbury Road
Wilton Ct 06897-4122
www.momentive.com
(704) 992-4107
3. Parts Modified and Reidentified
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
26 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 27

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
27 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 28

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
28 of 124
BOEING SERVICE BULLETIN 777-54A0024
BLANK PAGE

### Page 29

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Use the approved fastener and process material substitutions in accordance with
the applicable 777 SRM, Chapter 51. Alternate fasteners are listed in the applicable
777 SRM Chapter 51 and Boeing Drawing 012W6100.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
6. If the length of any fastener specified in this service bulletin does not meet the
installation standards in the applicable SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards in the applicable SRM Chapter 51 may be used.
7. A General Visual Inspection (GVI) is defined as: A visual examination of an interior
or exterior area, installation or assembly to detect obvious damage, failure or
irregularity. This level of inspection is made from within touching distance unless
otherwise specified. A mirror may be necessary to enhance visual access to all
exposed surfaces in the inspection area. This level of inspection is made under
normally available lighting conditions such as daylight, hangar lighting, flashlight or
drop-light and may require removal or opening of access panels or doors. Stands,
ladders or platforms may be required to gain proximity to the area being checked.
8. A Detailed Inspection (DET) is defined as: An intensive examination of a specific
item, installation, or assembly to detect damage, failure, or irregularity. Available
lighting is normally supplemented with a direct source of good lighting at an intensity
deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may
be necessary. Surface cleaning and elaborate procedures may be required.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
29 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 30

10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Accomplish the actions and evaluate the conditions separately for each system
disconnect assembly.
12. Refer to Appendix A for Scope of Change.
13. Removal of the engines, both trust reverser halves, and the precooler are not required.
Removal of these items provides additional optional access. During the validation of
Part 4 - System Disconnect Assembly Replacement, the engines, both left thrust
reverser halves, and the precooler were not removed.
B. WORK INSTRUCTIONS
1. Do a General Visual Inspection (GVI) of the interior of the strut disconnect assembly for hydraulic
fluid contamination in accordance with Part 1 - Hydraulic Fluid Contamination Inspection within
the compliance time in Paragraph 1.E., Compliance.
As an option to Part 1 - Hydraulic Fluid Contamination Inspection, Part 2 - Interior Detailed Inspection
(DET), or Part 3 - Exterior Detailed Inspection (DET), do Part 4 - System Disconnect Assembly
Replacement as Terminating Action.
a. Condition 1 - No hydraulic fluid contamination is found, repeat GVI of the interior of the strut
disconnect assembly for hydraulic fluid contamination in accordance with Part 1 - Hydraulic
Fluid Contamination Inspection at the interval in Paragraph 1.E., Compliance.
b. Condition 2 - Hydraulic fluid contamination is found, Do a Detailed Inspection (DET) of the
strut disconnect assembly for hydraulic fluid coking, heat discoloration, cracks, and etching
or pitting in accordance Part 2 - Interior Detailed Inspection (DET) within the compliance time
in Paragraph 1.E., Compliance.
(1) Condition 2A - 1) No hydraulic fluid coking is found; and 2) No heat discoloration is found;
and 3) No crack is found; and 4) No etching or pitting is found, repeat DET of the strut
disconnect assembly for hydraulic fluid coking, heat discoloration, cracks, and etching or
pitting in accordance Part 2 - Interior Detailed Inspection (DET) at the interval in Paragraph
1.E., Compliance.
(2) Condition 2B - 1) Hydraulic coking and/or heat discoloration is found; and 2) No crack is
found; and 3) No etching or pitting is found;
(a) Do a DET of the exterior of the strut disconnect assembly for cracks in accordance
with Part 3 - Exterior Detailed Inspection (DET) at the compliance time in Paragraph
1.E., Compliance and repeat at the interval in Paragraph 1.E., Compliance; and
(b) Do Part 4 - System Disconnect Assembly Replacement as terminating action at the
compliance time in Paragraph 1.E., Compliance.
c. Condition 3 - 1) Any crack is found; or 2) Any etching or pitting is found, do Part 4 - System
Disconnect Assembly Replacement as terminating action at the compliance time in Paragraph
1.E., Compliance.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
30 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 31

PART 1 - HYDRAULIC FLUID CONTAMINATION INSPECTION
1. Open thrust reverser. Refer to 777 AMM 78-31-00 as an accepted procedure.
2. Remove the left top and right top System Disconnect Thermal blankets. Refer to 777 AMM 54-54-01
as an accepted procedure.
3. Remove the electrical and hydraulic side cover plates in accordance with the Figure below:
Strut No. 2Strut No. 1
FIGURE 2FIGURE 1
4. Do a GVI of the interior of the strut disconnect assembly for hydraulic fluid contamination in
accordance with the Figure below:
Strut No. 2Strut No. 1
FIGURE 2FIGURE 1
5. Install the electrical and hydraulic side cover plates in accordance with the Figure below:
Strut No. 2Strut No. 1
FIGURE 2FIGURE 1
6. Install the left top and right top System Disconnect Thermal blankets. Refer to 777 AMM 54-54-01
as an accepted procedure.
7. Close thrust reverser. Refer to 777 AMM 78-31-00 as an accepted procedure.
8. Put the airplane back to a serviceable condition.
PART 2 - INTERIOR DETAILED INSPECTION (DET)
1. Open thrust reverser. Refer to 777 AMM 78-31-00 as an accepted procedure.
2. Remove the left top and right top System Disconnect Thermal blankets. Refer to 777 AMM 54-54-01
as an accepted procedure.
3. Remove the electrical and hydraulic side cover plates in accordance with the Figure below:
Strut No. 2Strut No. 1
FIGURE 4FIGURE 3
4. Do a DET of the strut disconnect assembly for hydraulic fluid coking, heat discoloration, cracks,
and etching or pitting in accordance with the Figure below. Refer to 777 AMM 20-10-09 as an
accepted procedure for removal and installation of tubing to troubleshoot sources of hydraulic
leaks, if required. Refer to SWPM 20-10-04 and SWPM 20-60-01 as accepted procedures to clean
contamination from the electrical connectors and wire bundles, if required.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
31 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 32

Strut No. 2Strut No. 1
FIGURE 4FIGURE 3
5. Install the electrical and hydraulic side cover plates in accordance with the Figure below:
Strut No. 2Strut No. 1
FIGURE 4FIGURE 3
6. Install the left top and right top System Disconnect Thermal blankets. Refer to 777 AMM 54-54-01
as an accepted procedure.
7. Close thrust reverser. Refer to 777 AMM 78-31-00 as an accepted procedure.
8. Put the airplane back to a serviceable condition.
PART 3 - EXTERIOR DETAILED INSPECTION (DET)
1. Open thrust reverser. Refer to 777 AMM 78-31-00 as an accepted procedure.
2. Remove the left top, left forward, left aft, left bottom, right top, right middle, right lower, right forward,
right aft, right bottom, and center aft System Disconnect Thermal blankets. Refer to 777 AMM
54-54-01 as an accepted procedure.
3. Do a DET of the exterior of the strut disconnect assembly for cracks in accordance with the Figure
below:
Strut No. 2Strut No. 1
FIGURE 6FIGURE 5
4. Install the left top, left forward, left aft, left bottom, right top, right middle, right lower, right forward,
right aft, right bottom, and center aft System Disconnect Thermal blankets. Refer to 777 AMM
54-54-01 as an accepted procedure.
5. Close thrust reverser. Refer to 777 AMM 78-31-00 as an accepted procedure.
6. Put the airplane back to a serviceable condition.
PART 4 - SYSTEM DISCONNECT ASSEMBLY REPLACEMENT (TERMINATING ACTION)
1. Prepare new System Disconnect Assembly for installation in accordance with the Figure below:
Strut No. 2Strut No. 1
FIGURE 13FIGURE 7
2. Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
32 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 33

a. Remove the engine. Refer to 777 AMM 71-00-02 as an accepted procedure.
b. Remove the thrust reverser. Refer to 777 AMM 78-31-01 as an accepted procedure.
c. Remove the following access panels. Refer to 777 AMM 06-43-00 and 777 AMM 54-53-01
as accepted procedures.
Strut No. 2Strut No. 1
432AL432AL
432AR432AR
432BL432BL
432BR432BR
d. Remove the Precooler to access the center bottom Strut Thermal Blanket, if required. Refer
to 777 AMM 36-11-15 as an accepted procedure.
e. Remove the left top, left forward, left aft, left bottom, right top, right middle, right lower, right
forward, right aft, right bottom, and center aft System Disconnect Thermal blankets. Refer to
777 AMM 54-54-01 as an accepted procedure.
f. Remove the left forward, right forward, and center bottom Strut Thermal Blankets. Refer to
777 AMM 54-54-01 as an accepted procedure.
3. Level the airplane. Refer to 777 AMM 08-21-00 as an accepted procedure.
NOTE: This step can be accomplished any time prior to leveling compound application in system
disconnect assembly replacement.
4. System Disconnect Assembly Replacement
a. Access and disconnect the tubing on the hydraulic side of disconnect assembly box in
accordance with the figure below:
Strut No. 2Strut No. 1
FIGURE 14FIGURE 8
b. Access and disconnect the wiring on the electrical side of disconnect assembly box in
accordance with the figure below:
Strut No. 2Strut No. 1
FIGURE 15FIGURE 9
c. Replace the disconnect assembly box in accordance with the figure below:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
33 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 34

Strut No. 2Strut No. 1
FIGURE 16FIGURE 10
d. Connect the wiring on the electrical side of disconnect assembly box and install cover in
accordance with the figure below:
Strut No. 2Strut No. 1
FIGURE 17FIGURE 11
e. Connect the tubing on the hydraulic side of disconnect assembly box in accordance with the
figure below:
Strut No. 2Strut No. 1
FIGURE 18FIGURE 12
5. Lower airplane from jacks, if required. Refer to 777 AMM 08-21-00  as an accepted procedure.
NOTE: This step can be accomplished any time after the leveling compound has cured in system
disconnect assembly replacement.
6. Restoration
The following steps restore the recommended access to the work area. Restore the access used
if different or additional access was accomplished.
a. Install the following access panels. Refer to 777 AMM 06-43-00 and 777 AMM 54-53-01 as
accepted procedures.
Strut No. 2Strut No. 1
432AL432AL
432AR432AR
432BL432BL
432BR432BR
b. Install the left forward, right forward, and center bottom Strut Thermal Blankets. Refer to 777
AMM 54-54-01 as an accepted procedure.
c. Install the left top, left forward, left aft, left bottom, right top, right middle, right lower, right
forward, right aft, right bottom, and center aft System Disconnect Thermal blankets. Refer to
777 AMM 54-54-01 as an accepted procedure.
d. Install the Precooler, if removed. Refer to 777 AMM 36-11-15 as an accepted procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
34 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 35

e. Install the thrust reverser. Refer to 777 AMM 78-31-01 as an accepted procedure.
f. Install the engine. Refer to 777 AMM 71-00-02 as an accepted procedure.
g. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1: November 04, 2010
35 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 36 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
(6  STRUT
A 12 LOCATIONS  STRUT
13 LOCAT  •
1875571
FIGURE 1: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION
(SHEET 1 OF 3)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  777-54A0024
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  36 of 124

### Page 37 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
FIGURE 1: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION
(SHEET 2 OF 3)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  ZOOS LLL
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  37 of 124

### Page 38

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Note the location of the 3 thermal
blanket attach fastener holes.
13-BoltRemove /
Keep
1
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Note the location of the 4 thermal
blanket attach fastener holes.
12-BoltRemove /
Keep
2
for the electrical side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Do a General Visual Inspection (GVI)
of the the interior of each side, hy-
draulic and electrical, of the system
disconnect assembly for the presence
of hydraulic fluid. The system discon-
nect assembly is painted with a high
temperature paint. Blistered and/or
peeling paint in the system disconnect
assembly is a sign that hydraulic fluid
is (or has been) present.
--System Disconnect -
Assembly
Inspect3
for the electrical side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
4
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
12-BoltInstall
(Kept)
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
5
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
13-BoltInstall
(Kept)
Fillet seal cover plates.-BMS 5-63SEALANTApply6
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAFLAG
NOTE
Thermal blanket attach fastener hole.1
FIGURE 1: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
38 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 39 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
STRUT
A 12 LOCATIONS  STRUT
13 LOCATIONS  1875323
FIGURE 2: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION
(SHEET 1 OF 3)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  777-54A0024
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  39 of 124

### Page 40 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
FWD
1875452
FIGURE 2: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION
(SHEET 2 OF 3)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  DOES LLL
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  Z110 O+

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Note the location of the 3 thermal
blanket attach fastener holes.
13-BoltRemove /
Keep
1
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Note the location of the 4 thermal
blanket attach fastener holes.
12-BoltRemove /
Keep
2
for the electrical side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Do a General Visual Inspection (GVI)
of the the interior of each side, hy-
draulic and electrical, of the system
disconnect assembly for the presence
of hydraulic fluid. The system discon-
nect assembly is painted with a high
temperature paint. Blistered and/or
peeling paint in the system disconnect
assembly is a sign that hydraulic fluid
is (or has been) present.
--System Disconnect -
Assembly
Inspect3
for the electrical side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
4
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
12-BoltInstall
(Kept)
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
5
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
13-BoltInstall
(Kept)
Fillet seal cover plates.-BMS 5-63SEALANTApply6
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAFLAG
NOTE
Thermal blanket attach fastener hole.1
FIGURE 2: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERNAL GVI INSPECTION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
41 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 42 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
STRUT
® 12 LOCATIONS  STRUT
13 LOCATIONS  •  1875792
FIGURE 3: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - DET INSPECTION
(SHEET 1 OF 4)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  42 of 124

### Page 43 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
(5]
1875796
FIGURE 3: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - DET INSPECTION
(SHEET 2 OF 4)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  ZOOS LLL
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  43 of 124

### Page 44

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Note the location of the 3 thermal
blanket attach fastener holes.
13-BoltRemove /
Keep
1
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Note the location of the 4 thermal
blanket attach fastener holes.
12-BoltRemove /
Keep
2
for the electrical side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Do a Detailed Inspection (DET) of the
electrical and hydraulic sides of the
system disconnect assembly for hy-
draulic fluid coking.
--System Disconnect -
Assembly
Inspect3
If hydraulic coking is present, clean a
minimum of 75% of the bottom surface
and a minimum 25% of each of the re-
maining surfaces of the electrical and
hydraulic sides of the system discon-
nect assembly. Pay particular attention
to the corners between the bottom and
the sides. Refer to SOPM 20-30-03 as
an accepted procedure.
1-System Disconnect -
Assembly
Clean4
Do a Detailed Inspection (DET) of the
electrical and hydraulic sides of the
system disconnect assembly for heat
discoloration, cracks, and etching or
pitting.
1-System Disconnect -
Assembly
Inspect5
for the electrical side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
6
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
12-BoltInstall
(Kept)
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
7
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
13-BoltInstall
(Kept)
Fillet seal cover plates.-BMS 5-63SEALANTApply8
FIGURE 3: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - DET INSPECTION
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
44 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 45

The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAFLAG
NOTE
Thermal blanket attach fastener hole.1
FIGURE 3: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - DET INSPECTION
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
45 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 46 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
STRUT
® 12 LOCATIONS  STRUT
13 LOCATIONS  1875799
FIGURE 4: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERIOR DET INSPECTION
(SHEET 1 OF 4)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  46 of 124

### Page 47 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
1875800
FIGURE 4: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERIOR DET INSPECTION
(SHEET 2 OF 4)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  ZOOS LLL
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  47 of 124

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Note the location of the 3 thermal
blanket attach fastener holes.
13-BoltRemove /
Keep
1
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Note the location of the 4 thermal
blanket attach fastener holes.
12-BoltRemove /
Keep
2
for the electrical side of the system
disconnect assembly.
1-Cover PlateRemove /
Keep
Do a Detailed Inspection (DET) of the
electrical and hydraulic sides of the
system disconnect assembly for hy-
draulic fluid coking.
--System Disconnect -
Assembly
Inspect3
If hydraulic coking is present, clean a
minimum of 75% of the bottom surface
and a minimum 25% of each of the re-
maining surfaces of the electrical and
hydraulic sides of the system discon-
nect assembly. Pay particular attention
to the corners between the bottom and
the sides. Refer to SOPM 20-30-03 as
an accepted procedure.
1-System Disconnect -
Assembly
Clean4
Do a Detailed Inspection (DET) of the
electrical and hydraulic sides of the
system disconnect assembly for heat
discoloration, cracks, and etching or
pitting.
1-System Disconnect -
Assembly
Inspect5
for the electrical side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
6
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
12-BoltInstall
(Kept)
for the hydraulic side of the system
disconnect assembly.
1-Cover PlateInstall
(Kept)
7
Tighten to 33.25 - 36.75 (35 target)
inch-pounds.
13-BoltInstall
(Kept)
Fillet seal cover plates.-BMS 5-63SEALANTApply8
FIGURE 4: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERIOR DET INSPECTION
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
48 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 49

The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAFLAG
NOTE
Thermal blanket attach fastener hole.1
FIGURE 4: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - INTERIOR DET INSPECTION
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
49 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 50 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
1875817
FIGURE 5: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - EXTERIOR DET INSPECTION
(SHEET 1 OF 2)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  DOES LLL
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.

### Page 51

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Do a Detailed Inspection (DET) of the
visible areas of the exterior of the sys-
tem disconnect assembly for cracks.
--System Disconnect -
Assembly
Inspect1
FIGURE 5: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - EXTERIOR DET INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
51 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 52 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
1876242
FIGURE 6: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - EXTERIOR DET INSPECTION
(SHEET 1 OF 2)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  DOES LLL
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Do a Detailed Inspection (DET) of the
visible areas of the exterior of the sys-
tem disconnect assembly for cracks.
--System Disconnect -
Assembly
Inspect1
FIGURE 6: STRUT NO. 2 - SYSTEM DISCONNECT ASSEMBLY - EXTERIOR DET INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
53 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 54 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
1876248
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 1 OF 7)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  54 of 124

### Page 55 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
B
DRAIN
DRAIN
A-A
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 2 OF 7)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  777-54A0024
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  55 of 124

### Page 56 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
B-B
(TYPICAL ALL 2
NUTPLATES IN
DISCONNECT
ASSEMBLY)
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 3 OF 7)
Original Issue: April 01, 2010
Revision 1 November 04, 2010T  777-54A0024
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  56 of 124

### Page 57 (OCR)

BOEING SERVICE BULLETIN 777-54A0024
12 DEGREES
FWD
FWD
AN0237
11 LOCATIONS  TYPICAL  E  1876658
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 4 OF 7)
Original Issue: April 01, 2010
Revision 1 November 04, 2010  BOEING PROPRIETARY -  777-54A0024
Copyright © Unpublished Work - See page 1 for details.  57 of 124

### Page 58

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for one system disconnect assembly.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Prepare new system disconnect assem-
bly for installation.
1311W3641-37SYSTEM DISCON-
NECT - ASSEMBLY
Install
(New)
1
the temporarily installed cover plate.2-Cover PlateRemove /
Keep
Inject sealant in the indicated areas of
the center bulkhead between the hy-
draulic and electrical sides.
-BMS 5-63SEALANTApply2
Fillet seal indicated areas in both the
electrical and hydraulic side of the
system disconnect box.
-BMS 5-63SEALANTApply
Fillet seal nutplates and cap seal all
nutplates attach fasteners in both the
electrical and hydraulic side of the
system disconnect box.
-BMS 5-63SEALANTApply
Fillet seal indicated areas on the out-
side of the system disconnect assem-
bly.
-BMS 5-63SEALANTApply
Install with faying surface sealant, BMS
5-63. Orient as shown
1311W3637-1DRAIN FITTINGInstall
(New)
3
Install with faying surface sealant, BMS
5-63. Install 1 on each side of bulk-
head.
2NAS1149C1790RWASHERInstall
(New)
Tighten to 100 - 400 inch-pounds.1AS5178J12NUT, TUBE, BULK-
HEAD
Install
(New)
Fillet seal B-nut and bulkhead fitting.-BMS 5-63SEALANTApply
Install with faying surface sealant, BMS
5-63.
1311W3637-3DRAIN FITTINGInstall
(New)
4
Install with faying surface sealant, BMS
5-63.
1NAS1149C0932RWASHER, PLAINInstall
(New)
Tighten to 100 - 400 inch-pounds.1AS5178J06NUT, TUBE, BULK-
HEAD
Install
(New)
Fillet seal B-nut and bulkhead fitting.-BMS 5-63SEALANTApply
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 5 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
58 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 59

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
to the indicated areas of the disconnect
assembly approximately half way up
the sides. Do not paint electrical or
hydraulic cover plates. This will ensure
proper adhesion of the leveling com-
pound.
-BAC5432, COM-
POUND 21 (DC
1200 OR SS4004P
01 P)
Primer, SiliconeApply5
Apply sealant, BMS 5-63, to flanges of
screen and bond into place. Minimize
sealant on non-flange surfaces.
1311W3011-5DRAIN SCREENInstall
(New)
6
Use to bond screen in place.-BMS 5-63SEALANTApply
Apply sealant, BMS 5-63, to flanges of
screen and bond into place. Minimize
sealant on non-flange surfaces.
1311W3011-6DRAIN SCREENInstall
(New)
7
Use to bond screen in place.-BMS 5-63SEALANTApply
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27WPP38MARKERInstall
(New)
8
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0074MARKER,POS 1Install
(New)
9
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0075MARKER, POS 2Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0076MARKER,POS 3Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0077MARKER,POS 4Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0078MARKER,POS 5Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0079MARKER, POS 6Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0080MARKER,POS 7Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0532MARKER,POS 8Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0533MARKER,POS 9Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0534MARKER,POS 10Install
(New)
Refer to SOPM 20-50-05 as an accept-
ed procedure.
1BAC27TPP0535MARKER,POS 11Install
(New)
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 6 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
59 of 124
BOEING SERVICE BULLETIN 777-54A0024

### Page 60

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Temporarily install cover plates.2-Cover PlateInstall
(Kept)
10
to all of the markers and decals. Refer
to SOPM 20-44-01 as an accepted
procedure
-SOPM 20-44-01,
TYPE 41
Coating, Skydrol Resis-
tant
Apply11
FIGURE 7: STRUT NO. 1 - SYSTEM DISCONNECT ASSEMBLY - PREPARATION
(SHEET 7 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: April 01, 2010
777-54A0024Revision 1 November 04, 2010
60 of 124
BOEING SERVICE BULLETIN 777-54A0024

The text continues at https://openairdocs.org/service-documents/boeing/777-54a0024/file/3599567b5c48.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
