# Boeing Alert Service Bulletin 777-57A0050: Revision 6

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-0810; AD 2023-03-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin 777-57A0050](https://openairdocs.org/service-documents/boeing/777-57a0050.md)
- Title as filed: SB 777-57A0050 R6
- Pages: 857
- PDF: https://openairdocs.org/files/sha256/d7/65/d76557e935085e36e54ff0e7077b0405ae251dae98eec4a1e604fa6e95ecfdc0
- Page: https://openairdocs.org/service-documents/boeing/777-57a0050/file/d76557e93508

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-57A0050
Original Issue: January 26, 2006
Revision 6: August 18, 2021
ATA System: 5710
SUBJECT: WINGS - Center and Outer Wings - Wire Bundle Teflon sleeve Installation and Fastener
Cap Sealing for Fuel Tank Wiring Hot Short Protection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2006 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
1 of 857
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
2 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ........................................... 1 1
S u m m a r y  ..................................................... 1 7
1. PLANNING INFORMATION ........................................ 2 5
A . E f f e c t i v i t y  ............................................... 2 5
1. Airplanes ............................................ 2 5
2 . S p a r e s  A f f e c t e d  ........................................ 5 8
B. Concurrent Requirements ...................................... 5 8
C. Reason ................................................ 5 8
D . D e s c r i p t i o n  .............................................. 6 0
E. Compliance .............................................. 6 9
F . A p p r o v a l  ............................................... 7 0
G. Manpower .............................................. 7 1
H. Weight and Balance Changes ................................... 1 0 2
I . E l e c t r i c a l  L o a d  D a t a  ........................................ 1 0 5
J . R e f e r e n c e s  ............................................. 1 0 5
1. Existing Data: ......................................... 1 0 5
2. Data Supplied with this Service Bulletin: .......................... 1 0 6
3. Installation Drawings Used in the Preparation of this Service Bulletin: .......... 1 0 6
K. Publications Affected ........................................ 1 0 6
L. Interchangeability and Intermixability of Parts ........................... 1 0 6
M. Software Accomplishment Summary ............................... 1 0 6
2. MATERIAL INFORMATION ....................................... 1 0 7
A. Material - Price and Availability .................................. 1 0 7
B. Industry Support Information .................................... 1 0 7
C. Parts Necessary for Each Airplane ................................ 1 0 7
1 . K i t s / P a r t s :  ........................................... 1 0 7
2. Parts and Materials Supplied by the Operator: ....................... 1 0 9
3. Parts Modified and Reidentified: ............................... 1 1 2
4. Parts Removed and Not Replaced: ............................. 1 1 2
D. Parts Necessary to Change Spares ................................ 1 1 2
E. Special Tooling - Price and Availability .............................. 1 1 3
F. Special Tooling Necessary to do this Service Bulletin ...................... 1 1 3
3. ACCOMPLISHMENT INSTRUCTIONS ................................. 1 1 5
A. GENERAL INFORMATION .................................... 1 1 5
B. WORK INSTRUCTIONS ...................................... 1 1 6
FIGURE 1: SLEEVING INSTALLATION FOR 1 INCH OR SMALLER DIAMETER WIRE BUNDLE . . 158
FIGURE 2: SLEEVING INSTALLATION FOR LARGER THAN 1 INCH DIAMETER WIRE BUNDLE . 161
FIGURE 3: WING REAR SPAR ACCESS PANEL REMOVAL/INSTALLATION ............ 1 6 4
FIGURE 4: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 1-2, 4] . 167
FIGURE 5: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 3] .... 1 7 3
FIGURE 6: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 1-2, 4] . 179
FIGURE 7: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 3] . . . 187
FIGURE 8: LEADING EDGE FIXED PANEL REMOVAL/INSTALLATION ............... 1 9 5
FIGURE 9: LEFT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 1-4]
................................................. 2 0 0
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
3 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 4

FIGURE 10: LEFT WING OUTBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
1 - 2 ,  4 ]  ............................................. 2 0 7
FIGURE 11: LEFT WING OUTBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
3 ]  ................................................ 2 0 8
FIGURE 12: RIGHT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
1 - 4 ]  ............................................... 2 1 0
FIGURE 13: RIGHT WING OUTBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
1 - 2 ,  4 ]  ............................................. 2 1 6
FIGURE 14: RIGHT WING OUTBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
3 ]  ................................................ 2 1 8
FIGURE 15: WING-TO-BODY FAIRING / ECS BAY ACCESS PANEL REMOVAL/INSTALLATION . . 220
FIGURE 16: LEFT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 1-4] ........ 2 2 2
FIGURE 17: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 1-4] ........ 2 2 5
FIGURE 18: LEFT FORWARD WING -TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 1-4] .......................................... 2 2 9
FIGURE 19: RIGHT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 1-4] .......................................... 2 3 1
F I G U R E  2 0 : D E L E T E D........................................... 2 3 4
FIGURE 21: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 2, Configuration
1 ,  3 - 5 ]  ............................................. 2 3 5
FIGURE 22: FUEL TANK FASTENER CAP SEAL APPLICATION .................... 2 3 9
FIGURE 23: LEFT CENTER FUEL CHEEK TANK FASTENER CAP SEALING [Group 1-2, Configuration 1;
Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration 1-2] .... 2 4 1
FIGURE 24: RIGHT CENTER FUEL CHEEK TANK FASTENER CAP SEALING [Group 1-2, Configuration
1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration 1-2] . . 245
FIGURE 25: BODY CENTER FUEL TANK FASTENER CAP SEALING [Group 2, Configuration 1-2; Group
3, Configuration 1-2; Group 4, Configuration 1-2] ...................... 2 4 9
FIGURE 26: LEFT MAIN FUEL TANK REAR SPAR FASTENER CAP SEALING [Group 1-2, Configuration
1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration 1-2] . . 256
FIGURE 27: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 1-2, Configuration
1; Group 2, Configuration 2; Group 4, Configuration 1-2] .................. 2 6 1
FIGURE 28: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 3, Configuration
1 - 2 ]  ............................................... 2 7 5
FIGURE 29: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEALING [Group 1-2, Configuration
1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration 1-2] . . 289
FIGURE 30: RIGHT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 1-2, Configuration
1; Group 2, Configuration 2; Group 4, Configuration 1-2] .................. 2 9 4
FIGURE 31: RIGHT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 3, Configuration
1 - 2 ]  ............................................... 3 0 8
FIGURE 32: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 2, Configuration
2 - 5 ]  ............................................... 3 2 2
FIGURE 33: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 3, Configuration
1, 3-5; Group 4, Configuration 1, 3-5] ............................ 3 2 6
FIGURE 34: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 3, Configuration
2-5; Group 4, Configuration 2-5] ............................... 3 3 0
FIGURE 35: LEFT ECS BAY WIRE BUNDLE SLEEVING INSPECTION [Group 8-12, 17, 20, Configuration
1; Group 25; Group 31, 34, 39, 42-43, 51-57, 69, Configuration 1] ............. 3 3 4
FIGURE 36: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSPECTION [Group 8-12, 17, 20, 22, 25, 42-43,
51-57, Configuration 1] .................................... 3 3 7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
4 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 5

FIGURE 37: LEFT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 8-12, 17, 20, Configuration
1; Group 25; Group 31, 34, 39, 42-43, 51-57, 69, Configuration 1] ............. 3 4 1
FIGURE 38: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 8-12, 17, 20, 22, 25,
42-43, 51-57, Configuration 1] ................................ 3 4 4
FIGURE 39: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 9-10, 51,
Configuration 1] ........................................ 3 4 8
FIGURE 40: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 17, Configuration
1 ]  ................................................ 3 5 1
FIGURE 41: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 11, 42, 52,
Configuration 1] ........................................ 3 5 5
FIGURE 42: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 15, 18, 22, 26,
3 1 - 3 2 ,  3 4 ,  3 7 ,  3 9 ,  4 1 ,  6 3 - 6 5 ,  6 9 ,  C o n f i g u r a t i o n  1 ]  ...................... 3 5 9
FIGURE 43: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 13, 24, Configuration
1 ]  ................................................ 3 6 3
FIGURE 44: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 16, 19, 21, 25, 27,
30, 33, 36, 38, 66-68, Configuration 1] ............................ 3 6 7
FIGURE 45: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 14, 58-62,
Configuration 1] ........................................ 3 7 1
FIGURE 46: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 6, Configuration
1 ]  ................................................ 3 7 6
FIGURE 47: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 12, 23, 43, 53-57,
Configuration 1] ........................................ 3 7 9
FIGURE 48: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 35, 70, Configuration
1 ]  ................................................ 3 8 4
FIGURE 49: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 7, 29, 49-50,
Configuration 1] ........................................ 3 8 7
FIGURE 50: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 9-11, 42, 51-52,
Configuration 1] ........................................ 3 9 1
FIGURE 51: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 12, 20, 23, 25,
27, 43, 53-57, 68, Configuration 1] .............................. 3 9 4
FIGURE 52: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 40, Configuration
1 ]  ................................................ 3 9 8
FIGURE 53: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 36, 38,
Configuration 1] ........................................ 4 0 1
FIGURE 54: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 35, 70,
Configuration 1] ........................................ 4 0 5
FIGURE 55: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 34, 37, 39, 41,
69, Configuration 1] ...................................... 4 0 9
FIGURE 56: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 14, 16, 24, 28-29,
58-62, 66, Configuration 1] .................................. 4 1 3
FIGURE 57: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 5, 15, 18, 21-22,
26, 30-33, 63-65, Configuration 1] .............................. 4 1 7
F I G U R E  5 8 : D E L E T E D........................................... 4 2 1
FIGURE 59: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 9-10, 51,
Configuration 1] ........................................ 4 2 2
FIGURE 60: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 17, Configuration
1 ]  ................................................ 4 2 5
FIGURE 61: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 11, 42, 52,
Configuration 1] ........................................ 4 2 9
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
5 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 6

FIGURE 62: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 15, 18, 22, 26,
31-32, 34, 37, 39, 41, 63-65, 69, Configuration 1] ...................... 4 3 3
FIGURE 63: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 13, 24,
Configuration 1] ........................................ 4 3 7
FIGURE 64: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 16, 19, 21, 25,
27, 30, 33, 36, 38, 66-68, Configuration 1] .......................... 4 4 1
FIGURE 65: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 14, 58-62,
Configuration 1] ........................................ 4 4 5
FIGURE 66: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 6, Configuration
1 ]  ................................................ 4 5 0
FIGURE 67: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 12, 23, 43, 53-57,
Configuration 1] ........................................ 4 5 3
FIGURE 68: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 35, 70,
Configuration 1] ........................................ 4 5 8
FIGURE 69: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 7, 29, 49-50,
Configuration 1] ........................................ 4 6 1
FIGURE 70: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 9-11, 42, 51-52,
Configuration 1] ........................................ 4 6 5
FIGURE 71: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 12, 20, 23, 25,
27, 43, 53-57, 68, Configuration 1] .............................. 4 6 8
FIGURE 72: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 40, Configuration
1 ]  ................................................ 4 7 2
FIGURE 73: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 36, 38,
Configuration 1] ........................................ 4 7 5
FIGURE 74: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 35, 70,
Configuration 1] ........................................ 4 7 9
FIGURE 75: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 34, 37, 39, 41,
69, Configuration 1] ...................................... 4 8 2
FIGURE 76: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 14, 16, 24,
28-29, 58-62, 66, Configuration 1] .............................. 4 8 6
FIGURE 77: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 5, 15, 18, 21-22,
26, 30-33, 63-65, Configuration 1] .............................. 4 9 0
F I G U R E  7 8 : D E L E T E D........................................... 4 9 4
FIGURE 79: RIGHT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 32-34,
36, 69, Configuration 1] .................................... 4 9 5
FIGURE 80: RIGHT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
32-34, 36, 69, Configuration 1] ................................ 4 9 7
FIGURE 81: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSPECTION [Group 12, 18, 20-21,
23, 25, 27, 30, 33, 36, 38, 40, 43-45, 53-57, 68, 71, Configuration 1] ........... 4 9 9
FIGURE 82: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 12, 18, 20-21,
23, 25, 27, 30, 33, 36, 38, 40, 43-45, 53-57, 68, 71, Configuration 1] ........... 5 0 2
FIGURE 83: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 1, Configuration
2-4; Group 2, Configuration 3-5; Group 4, Configuration 3-5] ................ 5 0 5
FIGURE 84: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 3, Configuration
3 - 5 ]  ............................................... 5 0 9
FIGURE 85: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 1, Configuration
2-4; Group 2, Configuration 3-5; Group 4, Configuration 3-5] ................ 5 1 2
FIGURE 86: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 3, Configuration
3 - 5 ]  ............................................... 5 1 6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
6 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 7

FIGURE 87: RIGHT WING REAR SPAR WIRE BUNDLE CLAMP INSPECTION [Group 1, Configuration 2-4;
Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration 3-5] . . . 519
FIGURE 88: RIGHT WING REAR SPAR WIRE BUNDLE CLAMP REPLACEMENT [Group 1, Configuration
2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration 3-5] . 522
FIGURE 89: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEAL INSPECTION [Group 1,
Configuration 2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration
3 - 5 ]  ............................................... 5 2 5
FIGURE 90: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEALING [Group 1, Configuration
2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration 3-5] . 527
FIGURE 91: WIRE BUNDLE SLEEVING INSTALLATION FOR LARGER THAN 1 INCH DIAMETER WIRE
BUNDLE - INSPECTION [Group 1, Configuration 2-4; Group 2, Configuration 3-5; Group 3,
Configuration 3-5; Group 4, Configuration 3-5] ....................... 5 2 9
F I G U R E  9 2 : D E L E T E D........................................... 5 3 1
F I G U R E  9 3 : D E L E T E D........................................... 5 3 2
FIGURE 94: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEAL INSPECTION [Group 1,
Configuration 2; Group 2-4, Configuration 3] ........................ 5 3 3
FIGURE 95: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEALING [Group 1, Configuration
2; Group 2-4, Configuration 3] ................................ 5 3 5
FIGURE 96: LEFT MAIN FUEL TANK REAR SPAR FASTENER CAP SEAL INSPECTION [Group 1,
Configuration 2-3; Group 2, Configuration 3-4; Group 3, Configuration 3-4; Group 4, Configuration
3 - 4 ]  ............................................... 5 3 7
FIGURE 97: LEFT MAIN FUEL TANK REAR SPAR FASTENER CAP SEALING [Group 1, Configuration 2-3;
Group 2, Configuration 3-4; Group 3, Configuration 3-4; Group 4, Configuration 3-4] . . . 540
FIGURE 98: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEAL INSPECTION [Group 1,
Configuration 2-3; Group 2, Configuration 3-4; Group 3, Configuration 3-4; Group 4, Configuration
3 - 4 ]  ............................................... 5 4 3
FIGURE 99: RIGHT MAIN FUEL TANK REAR SPAR FASTENER CAP SEALING [Group 1, Configuration
2-3; Group 2, Configuration 3-4; Group 3, Configuration 3-4; Group 4, Configuration 3-4] . 546
FIGURE 100: DELETED ........................................... 5 4 9
FIGURE 101: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 20, 40, 45; Group
46, 72-73, Configuration 1] .................................. 5 5 0
FIGURE 102: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 24] .... 5 5 3
FIGURE 103: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 28, 35; Group 47,
Configuration 1; Group 70; Group 74-79, Configuration 1] ................. 5 5 6
FIGURE 104: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 20, 40, 45; Group
46, 72-73, Configuration 1] .................................. 5 6 0
FIGURE 105: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 24] . . . 563
FIGURE 106: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 28, 35; Group
47, Configuration 1; Group 70; Group 74-79, Configuration 1] ............... 5 6 6
FIGURE 107: DELETED ........................................... 5 7 0
FIGURE 108: LEFT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 1-20, 42-43, 49-61, 63, 66-67] ............................ 5 7 1
FIGURE 109: LEFT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 21-41, 44-47, 62, 64-65, 68-70, 72, 74-75] ..................... 5 7 4
FIGURE 110: LEFT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSPECTION [Group
4 8 ,  7 1 ,  7 3 ,  7 6 - 8 3 ]  ....................................... 5 7 6
FIGURE 111: LEFT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 48, 71, 73, 76-83] ................................... 5 7 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
7 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 8

FIGURE 112: RIGHT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 1-20, 42-43, 49-61, 63, 66-67] ............................ 5 8 0
FIGURE 113: RIGHT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 21-41, 44-47, 62, 64-65, 68-70, 72, 74-75] ..................... 5 8 3
FIGURE 114: RIGHT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSPECTION [Group
4 8 ,  7 1 ,  7 3 ,  7 6 - 8 3 ]  ....................................... 5 8 5
FIGURE 115: RIGHT FORWARD WING-TO-BODY FAIRING WIRE BUNDLE SLEEVING INSTALLATION
[Group 48, 71, 73, 76-83] ................................... 5 8 7
FIGURE 116: LEFT SIDE REAR SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 1-47,
4 9 - 7 0 ,  7 2 ,  7 4 - 7 5 ]  ....................................... 5 9 0
FIGURE 117: LEFT SIDE REAR SPAR BULKHEAD WIRE BUNDLE SLEEVING INSPECTION [Group 48,
7 1 ,  7 3 ,  7 6 - 8 3 ]  ......................................... 5 9 3
FIGURE 118: LEFT SIDE REAR SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 48,
7 1 ,  7 3 ,  7 6 - 8 3 ]  ......................................... 5 9 6
FIGURE 119: RIGHT SIDE REAR SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group
1 - 4 7 ,  4 9 - 7 0 ,  7 2 ,  7 4 - 7 5 ]  .................................... 5 9 9
FIGURE 120: RIGHT SIDE REAR SPAR BULKHEAD WIRE BUNDLE SLEEVING INSPECTION [Group 48,
7 1 ,  7 3 ,  7 6 - 8 3 ]  ......................................... 6 0 2
FIGURE 121: RIGHT SIDE REAR SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group
4 8 ,  7 1 ,  7 3 ,  7 6 - 8 3 ]  ....................................... 6 0 5
FIGURE 122: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 1-4] . . 608
FIGURE 123: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 5] . . . 612
FIGURE 124: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 6-7, 10-11, 42]
................................................. 6 1 6
FIGURE 125: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 49] . . 620
FIGURE 126: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 13-14, 16, 19,
2 4 ,  2 8 - 2 9 ,  3 5 ,  4 7 ,  5 0 ,  5 4 - 5 5 ,  5 8 ,  6 0 ,  6 2 ,  7 7 - 7 8 ,  8 0 ]  ..................... 6 2 4
FIGURE 127: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 8] . . . 627
FIGURE 128: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 9, 51-52] . 631
FIGURE 129: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 12, 15, 17-18,
2 0 ,  2 3 ,  2 5 - 2 7 ,  3 7 ,  4 0 - 4 1 ,  4 3 ,  4 5 - 4 6 ,  5 3 ,  5 6 ,  6 4 ,  7 3 ,  8 3 ]  ................... 6 3 5
FIGURE 130: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 57, 68] . 638
FIGURE 131: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 59, 61, 66-67,
7 0 ,  7 5 - 7 6 ,  7 9 ,  8 1 ]  ....................................... 6 4 2
FIGURE 132: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 22, 31-32, 34,
3 9 ,  6 3 ,  6 5 ]  ........................................... 6 4 5
FIGURE 133: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 69, 72] . 648
FIGURE 134: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 74] . . 652
FIGURE 135: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSPECTION [Group 22, 31, 34, 39, 46, 69, 72]
................................................. 6 5 5
FIGURE 136: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 22, 31, 34, 39, 46, 69,
7 2 ]  ............................................... 6 5 8
FIGURE 137: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSPECTION [Group 8] .... 6 6 1
FIGURE 138: FRONT SPAR BULKHEAD WIRE BUNDLE SLEEVING INSTALLATION [Group 8] . . . 665
FIGURE 139: LEFT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 1-4]
................................................. 6 6 9
FIGURE 140: LEFT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
5 - 1 1 ,  1 3 ,  4 2 - 4 3 ,  4 9 - 5 4 ,  5 8 ]  .................................. 6 7 3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
8 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 9

FIGURE 141: LEFT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 12,
1 4 - 4 1 ,  4 4 - 4 7 ,  5 5 - 5 7 ,  5 9 - 7 0 ,  7 2 ,  7 4 - 7 5 ]  ............................ 6 7 7
FIGURE 142: LEFT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 48,
7 1 ,  7 3 ,  7 6 - 8 3 ]  ......................................... 6 8 1
FIGURE 143: LEFT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 48,
7 1 ,  7 3 ,  7 6 - 8 3 ]  ......................................... 6 8 5
FIGURE 144: RIGHT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
1 - 3 1 ,  3 3 - 4 7 ,  4 9 - 7 0 ,  7 2 ,  7 4 - 7 5 ]  ................................ 6 8 9
FIGURE 145: RIGHT WING INBOARD AND OUTBOARD FRONT SPAR WIRE BUNDLE SLEEVING
INSTALLATION [Group 32] .................................. 6 9 2
FIGURE 146: RIGHT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 48,
7 1 ,  7 3 ,  7 6 - 8 3 ]  ......................................... 6 9 5
FIGURE 147: RIGHT WING INBOARD FRONT SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group
4 8 ,  7 1 ,  7 3 ,  7 6 - 8 3 ]  ....................................... 6 9 8
FIGURE 148: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 6, 8] . . . 701
FIGURE 149: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 7, 49-50] . 704
FIGURE 150: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 9-10, 51] . 707
FIGURE 151: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 11, 42, 52] . 710
FIGURE 152: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 12, 20, 23, 25,
2 7 ,  4 3 ,  5 3 - 5 5 ,  5 7 ,  6 8 ]  ..................................... 7 1 4
FIGURE 153: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 14, 16, 19, 58-59,
6 6 - 6 7 ]  ............................................. 7 1 9
FIGURE 154: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 15, 18, 21-22,
2 6 ,  3 0 - 3 4 ,  3 7 ,  3 9 ,  4 1 ,  4 6 ,  6 3 - 6 5 ,  6 9 ,  7 2 - 7 3 ]  ......................... 7 2 4
FIGURE 155: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 17, 56] . 728
FIGURE 156: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 24, 28, 35, 47,
7 0 ,  7 4 - 7 7 ]  ........................................... 7 3 3
FIGURE 157: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 13, 40, 45] . 737
FIGURE 158: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 60-62] . 741
FIGURE 159: LEFT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 78-79] . 746
FIGURE 160: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 1-4, 8, 17, 36,
3 8 ,  4 4 ]  ............................................. 7 4 9
FIGURE 161: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 5, 15, 18, 21-22,
2 6 ,  3 0 - 3 3 ,  6 3 - 6 5 ]  ....................................... 7 5 2
FIGURE 162: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 6, 13, 35, 47,
7 0 ,  7 4 - 7 5 ]  ........................................... 7 5 7
FIGURE 163: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 7, 14, 16, 19,
2 4 ,  2 8 - 2 9 ,  4 9 - 5 0 ,  5 8 - 6 2 ,  6 6 - 6 7 ]  ............................... 7 6 1
FIGURE 164: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 9-11, 40, 42,
4 5 ,  5 1 - 5 2 ]  ........................................... 7 6 6
FIGURE 165: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 12, 20, 23, 25,
2 7 ,  4 3 ,  5 3 - 5 7 ,  6 8 ]  ....................................... 7 7 0
FIGURE 166: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 34, 37, 39, 41,
4 6 ,  6 9 ,  7 2 ]  ........................................... 7 7 5
FIGURE 167: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 73] . . 780
FIGURE 168: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSPECTION [Group 48, 71, 73, 76-83]
................................................. 7 8 4
FIGURE 169: RIGHT WING REAR SPAR WIRE BUNDLE SLEEVING INSTALLATION [Group 48, 71, 73,
7 6 - 8 3 ]  ............................................. 7 8 7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
9 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 10

FIGURE 170: BODY CENTER FUEL TANK FASTENER CAP SEALING INSPECTION ......... 7 9 0
FIGURE 171: BODY CENTER FUEL TANK FASTENER CAP SEALING ................. 7 9 5
FIGURE 172: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 1-11, 13, 42-43,
4 9 - 5 4 ,  5 6 ,  5 8 ]  ......................................... 8 0 0
FIGURE 173: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING INSPECTION [Group 1-4]
................................................. 8 0 3
FIGURE 174: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 1-4] .... 8 0 6
FIGURE 175: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING INSPECTION [Group 5-11,
1 3 ,  4 2 - 4 3 ,  4 9 - 5 4 ,  5 8 ]  ..................................... 8 0 9
FIGURE 176: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 5-11, 13, 42-43,
4 9 - 5 4 ,  5 8 ]  ........................................... 8 1 2
FIGURE 177: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING INSPECTION [Group 12,
1 4 - 4 1 ,  4 4 - 4 8 ,  5 5 - 5 7 ,  5 9 - 8 3 ]  .................................. 8 1 5
FIGURE 178: LEFT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 12, 14-41, 44-48,
5 5 - 5 7 ,  5 9 - 8 3 ]  ......................................... 8 1 8
FIGURE 179: RIGHT MAIN FUEL TANK AND RIGHT CENTER FUEL CHEEK TANK FRONT SPAR FASTENER
CAP SEALING INSPECTION [Group 1-11, 13, 42-43, 49-54, 58] ............. 8 2 1
FIGURE 180: RIGHT MAIN FUEL TANK AND RIGHT CENTER FUEL CHEEK TANK FRONT SPAR FASTENER
CAP SEALING [Group 1-11, 13, 42-43, 49-54, 58] ..................... 8 2 7
FIGURE 181: RIGHT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING INSPECTION [Group
1 2 ,  1 4 - 4 1 ,  4 4 - 4 8 ,  5 5 - 5 7 ,  5 9 - 8 3 ]  ............................... 8 3 3
FIGURE 182: RIGHT MAIN FUEL TANK FRONT SPAR FASTENER CAP SEALING [Group 12, 14-41, 44-48,
5 5 - 5 7 ,  5 9 - 8 3 ]  ......................................... 8 3 6
FIGURE 183: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 1-47, 49-70, 72, 74-75]
................................................. 8 3 9
FIGURE 184: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSPECTION [Group 48, 71, 73, 76-83] . 842
FIGURE 185: RIGHT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 48, 71, 73, 76-83] . 845
FIGURE 186: LEFT ECS BAY WIRE BUNDLE SLEEVING INSPECTION [Group 23, 27, 40, 45] .... 8 4 8
FIGURE 187: LEFT ECS BAY WIRE BUNDLE SLEEVING INSTALLATION [Group 23, 27, 40, 45] . . . 851
APPENDIX A: SADDLE CLAMP TA0910070( ) PART NUMBER AND DIMENSION DATA ........ 8 5 4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
10 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 11

Commercial 
Airplanes
777
Service Bulletin
ALERT
Revision Transmittal SheetNumber: 777-57A0050Original Issue: January 26, 2006
Revision 6: August 18, 2021
ATA System: 5710
SUBJECT: WINGS - Center and Outer Wings - Wire Bundle Teflon sleeve Installation and Fastener
Cap Sealing for Fuel Tank Wiring Hot Short Protection
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2017-11-14 is related to this service bulletin.
The effective date of AD 2017-11-14 is July 11, 2017.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Effects of this Revision on airplanes on which the Original Issue, Revision 1, Revision 2, Revision 3, Revision
4 or Revision 5 was previously done:
See Paragraph 1.D., Description for more information.
NOTE: AD 2017-11-14 replaces AD 2011-26-03 and AD 2010-24-12.
Multiple airplanes have been moved to new groups in this service bulletin effectivity. Refer to the table below
and Paragraph 1.A.1., Airplanes, for the new Group assignments:
New GroupPrevious GroupAirplane Variable Number
Group 49Group 7WD671-WD675
Group 50Group 7WD546, WD588 and WD626
Group 51Group 10WC363 and WC364
Group 52Group 11WC391-WC393
Group 53Group 12WC490-WC491 and WC522
Group 54Group 12WC506 and WC507
Group 55Group 12WB142
Group 56Group 12WC532
Group 57Group 12WC221 and WC222
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
11 of 857

### Page 12

New GroupPrevious GroupAirplane Variable Number
Group 58Group 14WD547-WD548, WD565, and
WD653
Group 59Group 14WD566-WD568
Group 60Group 14WD508-WD510, WD538-WD539,
WD595-WD596, WD660-WD662,
WD705-WD709, WD747-WD750,
WD803-WD805, WD829-WD830,
WD849-WD852, WD873-WD875,
WD936-WD939, and WD966-
WD967
Group 61Group 14WD573
Group 62Group 14WD540, WD597-WD599, WD751,
WD806, WD853, WD876, WD946,
WD968, and WD981-WD982
Group 63Group 15WD014-WD015 and WD081
Group 64Group 15WD055 and WD068-WD073
Group 65Group 15WD016-WD018
Group 66Group 16WD569-WD571
Group 67Group 19WD572
Group 68Group 27WC223-WC224
Group 69Group 34WD103-WD105
Group 70Group 35WE128-WE137, WE176-WE177
Group 71Group 44WF170
Group 72Group 46WD106
Group 73Group 46WD112
Group 74Group 47WE143 and WE353
Group 75Group 47WE178
Group 76Group 47WE138-WE140, WE486-WE493,
WE495-WE498, WE591, WE626-
WE627
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
12 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 13

New GroupPrevious GroupAirplane Variable Number
Group 77Group 47WD896-WD904, WD931-WD935,
WE005-WE007, WE035-WE040,
WE057, WE078, WE146-WE150,
WE170, WE215, WE246-WE250,
WE267, WE294-WE298, WE314-
WE320, WE341-WE345, WE391-
WE392, WE397-WE405, WE427-
WE431, WE438-WE440, WE442-
WE446, WE451-WE465, WE471-
WE478, WE501-WE504, WE511-
WE516, WE526-WE528, WE536-
WE548, WE556-WE569, WE576-
WE581, WE601-WE605, WE631,
WE641-WE642, WE646, WE651-
WE659, WE701, WE711 and
WE731
Group 78Group 47WD995, WE171-WE174, WE346,
WE466-WE469, WE549, WE570,
WE582-WE583, WE647, WE660-
WE661, WE666-WE674, WE702-
WE705, WE712, WE732, WE751-
WE764, WE776-WE783, WE786,
WE791-WE792 and WE796
Group 79Group 47WE499, WE736-WE740, and
WE746-WE749
Airplane Variable Numbers WD905-WD910, WE175, WE347-WE350, WE366-WE368, WE406-WE411, WE470,
WE479-WE484, WE571, WE584-WE587, WE675-WE677, WE681-WE689, WE765-WE772, WE784-WE785,
WE797-WE798, WE801-WE806, WE811-WE812, WE826-WE828, WE831-WE835, WE851-WE853, WE856
and WE861 are added to new Group 80 of this service bulletin effectivity.
Airplane Variable Number WE750 is added to new Group 81 of this service bulletin effectivity.
Airplane Variable Numbers WF028-WF029, WF069-WF074, WF161-WF165, WF180, WF201, WF208-WF215,
WF217, WF221-WF225, WF231-WF244, WF246-WF248, WF256-WF258, WF261-WF262, WF266-WF273,
WF281-WF284, WF286-WF288 and WF321 are added to new Group 82 of this service bulletin effectivity.
Airplane Variable Number WD156 is added to new Group 83 of this service bulletin effectivity.
REASON FOR REVISION
This revision is sent because Boeing has discovered that some airplanes did not have wire bundle protective
(Teflon) sleeving installed under clamp locations at multiple locations in the airplane. As a result of this, these
airplanes have been added to the service bulletin effectivity in new Groups 80, 81, 82, and 83. Work Packages
23 thru 39 have been added for more wire bundle locations that require (Teflon) sleeving and fasteners that
require to be cap sealed for new and existing Groups. Some existing airplanes have been moved to new groups
where locations of the Teflon Sleeve required are different. As an alternative to installing (Teflon) sleeving, an
option to replace existing clamps with BACC10NA( ) plastic clamps is given. In the pressurized area of the
airplane only, an option to replace existing clamps with ringposts with hardware is given.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
13 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 14

In addition, multiple locations in the airplane that were previously found to need (Teflon) sleeving did not need
the protective sleeving and are removed from the work instructions as a result. Existing Work Packages and
Figures have been updated and Work Package 17 is deleted. Airplanes that have already installed (Teflon)
sleeving at these locations do not need to remove the installed Teflon sleeve.
These sections were changed:
1. Summary, Background: Reference to related Boeing Service Related Problem (SRP) added. Summary
Evaluation Table changed.
2. Summary, Action: New Work Packages added and group applicabilities of existing Work Packages
changed.
3. Summary, Compliance: Compliance for new groups added.
4. Summary, Industry Support Information: Warranty statement changed.
5. Summary, Illustration: Airplane groups added and text updated.
6. Paragraph 1.A.1., Airplanes: Reference to PRR added. Airplane groups, configurations and airplanes
added. Existing configurations changed.
7. Paragraph 1.B. Concurrent Requirements: Updated AWL revision date.
8. Paragraph 1.C., Reason: Reference to related Boeing Service Related Problem (SRP) and Revision
6 data added.
9. Paragraph 1.D., Description: New Work Packages and maintenance zone tables added. Group
applicabilities of existing Work Packages and more work table changed.
10. Paragraph 1.E., Compliance: Compliance for new groups added.
11. Paragraph 1.F., Approval: Approval statement updated.
12. Paragraph 1.G., Manpower: Tables for new Work Packages added. Existing tables changed. Group
applicability for existing tables updated. Removed tables.
13. Paragraph 1.H., Weight and Balance Changes: New Groups added. Existing Groups changed.
14. Paragraph 1.J., References - PRR 62777-120RS and 777-SRP-28-0203 added.
15. Paragraph 1.K.1., Publications: Publications added.
16. Paragraph 2.B., Industry Support Information: Warranty statement changed.
17. Paragraph 2.C.2., Parts and Materials Supplied by the Operator: New table added and group
applicabilities changed.
18. Paragraph 3.A. General Information: Updated information.
19. Paragraph 3.B. Work Instructions: Updated existing Work Packages and added new Work Packages.
20. FIGURE 1 and FIGURE 2: Step table footnote added. Existing note and step table footnote changed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
14 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 15

21. FIGURE 4 thru FIGURE 7: Illustrations and step table changed.
22. FIGURE 8: Group applicability changed.
23. FIGURE 9 and FIGURE 12: Illustrations and step table changed.
24. FIGURE 15: Group applicability changed.
25. FIGURE 16 and FIGURE 17: Illustrations and step table changed.
26. FIGURE 18 and FIGURE 19: Step table footnote added.
27. FIGURE 20: Figure deleted.
28. FIGURE 21: Illustration and step table changed.
29. FIGURE 22: Group applicability changed.
30. FIGURE 32 thru FIGURE 34: Illustrations and step table changed.
31. FIGURE 35 thru FIGURE 38: Illustrations and step table changed.
32. FIGURE 39: Illustrations and step table changed. Group applicability changed.
33. FIGURE 40: Illustrations and step table changed.
34. FIGURE 41 and FIGURE 42: Illustrations and step table changed. Group applicability changed.
35. FIGURE 43: Illustrations and step table changed.
36. FIGURE 44 and FIGURE 45: Illustrations changed and step table changed. Group applicability changed.
37. FIGURE 46: Illustrations changed.
38. FIGURE 47: Illustrations and step table changed.
39. FIGURE 48 thru FIGURE 51: Illustrations and step table changed. Group applicability changed.
40. FIGURE 52 thru FIGURE 53: Illustrations and step table changed.
41. FIGURE 54 thru FIGURE 57: Illustrations and step table changed. Group applicability changed.
42. FIGURE 58: Figure deleted.
43. FIGURE 59: Illustrations changed and Group applicability changed..
44. FIGURE 60: Illustrations changed and step table changed.
45. FIGURE 61 and FIGURE 62: Illustrations and step table changed. Group applicability changed.
46. FIGURE 63: Illustrations and step table changed.
47. FIGURE 64 and FIGURE 65: Illustrations and step table changed. Group applicability changed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
15 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 16

48. FIGURE 66: Illustrations changed.
49. FIGURE 67 and FIGURE 68: Illustrations and step table changed. Group applicability changed.
50. FIGURE 69: Group applicability changed.
51. FIGURE 70 thru FIGURE 71: Illustrations and step table changed. Group applicability changed.
52. FIGURE 72 and FIGURE 73: Illustrations and step table changed.
53. FIGURE 74 thru FIGURE 77: Illustrations and step table changed. Group applicability changed.
54. FIGURE 78: Figure deleted.
55. FIGURE 79 thru FIGURE 82: Group applicability changed.
56. FIGURE 83: Illustrations changed.
57. FIGURE 84 thru FIGURE 86: Illustrations and step table changed.
58. FIGURE 92, FIGURE 93, FIGURE 100: Figure deleted.
59. FIGURE 101, FIGURE 103 thru FIGURE 104, FIGURE 106: Illustrations and step table changed. Group
applicability changed.
60. FIGURE 107: Figure deleted.
61. FIGURE 108 thru FIGURE 187 added.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
January 26, 2006Original Issue:
August 02, 2007Revision 1:
May 14, 2009Revision 2:
February 18, 2014Revision 3:
September 28, 2015Revision 4:
November 08, 2018Revision 5:
August 18, 2021Revision 6:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
16 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 17

Commercial 
Airplanes
777
Service Bulletin
ALERT
SummaryNumber: 777-57A0050Original Issue: January 26, 2006
Revision 6: August 18, 2021
ATA System: 5710
SUBJECT: WINGS - Center and Outer Wings - Wire Bundle Teflon sleeve Installation and Fastener
Cap Sealing for Fuel Tank Wiring Hot Short Protection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
This service bulletin will help to prevent possible sources of ignition within the fuel tanks caused by wiring shorts
at the clamp locations on the wire bundles that are routed on the fuel tank boundary structure. An ignition source
within the fuel tanks could result in a fire or an explosion.
This service bulletin is the result of the safety assessments conducted by Boeing under SFAR 88, "Fuel Tank
System Fault Tolerance Evaluation Requirements". This service bulletin addresses the concerns of electrical
arcing that can be caused by the electrical energy present in the wire bundles within the fuel tank boundary
structure. Some operators have reported pinched insulation or wiring damage under the clamp. In some cases,
bared wires were found. This condition can cause an electrical arcing on the fuel tank boundary structure or the
voltage can find a path to permanent fasteners that penetrate through the fuel tank and creates an electrical
arcing inside the fuel tank. This service bulletin provides instructions to install Teflon sleeve under the wire
bundle clamps and cap seal the penetrating fasteners that were determined to have a capability of creating
electrical arcing during a wiring short event.
Airworthiness Limitations (AWL) 28-AWL-31 and 28-AWL-32 in the 777 Maintenance Planning Data (MPD)
Document D622W001-9 section 9, Airworthiness Limitations (AWLs) and Certification Maintenance Requirements
(CMRs) are related to this service bulletin.
Boeing Service Related Problem (SRP) 777-SRP-28-0203 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
17 of 857

### Page 18

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/Parts.YesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 62777-120RS, PRR 61998-4)
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Work Package 1: Install Teflon sleeve under the selected clamps on the wire bundles in the wing rear spars.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Work Package 2: Install Teflon sleeve under the selected clamps on the wire bundles in the wing inboard and
outboard front spars.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Work Package 3: Install Teflon sleeve under the selected clamps on the wire bundles in the wing-to-body fairings
and left/right Environmental Control System (ECS) bays.
Group 2, Configuration 1-2; Group 3, Configuration 1-2; Group 4, Configuration 1-2:
Work Package 4: Install Teflon sleeve under the selected clamps on the wire bundles in the front spar bulkhead.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Work Package 5: Cap seal the selected fasteners in the center wing fuel tanks.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Work Package 6: Cap seal the selected fasteners in the left main and surge fuel tank.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Work Package 7: Cap seal the selected fasteners in the right main and surge fuel tank.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
18 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 19

Group 5-7, 9-43, 45-47, 49-70, 72-79, Configuration 1:
Work Package 8: Do a detailed inspection of the selected wire bundle clamps in the left and right rear wing spars
as applicable. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any
of the clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle clamps.
Group 32-34, 36, 69, Configuration 1:
Work Package 9: Do a detailed inspection of the selected wire bundle clamps in the right wing inboard front
spar. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any of the
clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle clamps.
Group 12, 18, 20-21, 23, 25, 27, 30, 33, 36, 38, 40, 43-45, 53-57, 68, 71, Configuration 1:
Work Package 10: Do a detailed inspection of the selected wire bundle clamps in the front spar bulkhead. If the
wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any of the clamps do
not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle clamps.
Group 8-12, 17, 20, 22, 25, 31, 34, 39, 42-43, 51-57, 69, Configuration 1:
Work Package 11: Do a detailed inspection of the selected wire bundle clamps in the left and right ECS bay. If
the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any of the clamps
do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle clamps.
Group 1, Configuration 2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration
3-5:
Work Package 12: More work. Do a detailed inspection of the selected wire bundle clamps in the left rear wing
spar. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any of the
wire bundle clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle clamps.
Do a detailed inspection of a wire bundle clamp in the right rear wing spar at the location IRSS 450. If the clamp
type is not a saddle clamp, remove the existing clamp and replace it with a saddle clamp. Do a detailed inspection
of the applicable Teflon sleeve installed under the wire bundle clamps, on wire bundles with a diameter more
than 1 inch, in the left and right wing rear spars for correct installation. If all the Teflon sleeve have been installed
correctly, then no more work is necessary. If any of the Teflon sleeve have not been installed correctly, then
replace the Teflon sleeve.
Group 1, Configuration 2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration
3-5:
Work Package 13: More work. Do a detailed inspection of the applicable Teflon sleeve installed under the wire
bundle clamps, on wire bundles with a diameter more than 1 inch, in the left and right wing inboard and outboard
front spars for correct installation. If all the Teflon sleeve have been installed correctly, then no more work is
necessary. If any of the Teflon sleeve have not been installed correctly, then replace the Teflon sleeve.
Group 1, Configuration 2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration
3-5:
Work Package 14: More work. Do a detailed inspection of the selected Teflon sleeve installed under the wire
bundle clamps, on wire bundles with a diameter more than 1 inch, in the left and right wing-to-body fairings for
correct installation. If all the Teflon sleeve have been installed correctly, then no more work is necessary. If any
of the Teflon sleeve have not been installed correctly, then replace the Teflon sleeve.
Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration 3-5:
Work Package 15: More work. Do a detailed inspection of the applicable Teflon sleeve installed under the wire
bundle clamps, on wire bundles with a diameter more than 1 inch, in the front spar bulkhead for correct installation.
If all the Teflon sleeve have been installed correctly, then no more work is necessary. If any of the Teflon sleeve
have not been installed correctly, then replace the Teflon sleeve.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
19 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 20

Group 1, Configuration 2-4; Group 2, Configuration 3-5; Group 3, Configuration 3-5; Group 4, Configuration
3-5:
Work Package 16: More work. Do a detailed inspection of the selected fasteners in the right main fuel tank rear
spar. If all the fasteners are cap sealed then no more work is necessary. If any of the fasteners are not cap
sealed, cap seal the fasteners.
Work Package 17: Deleted.
Group 1, Configuration 2; Group 2-4, Configuration 3:
Work Package 18: More work. Do a detailed inspection of the selected fasteners in the right main fuel tank rear
spar. If all the fasteners are cap sealed then no more work is necessary. If any of the fasteners are not cap
sealed, cap seal the fasteners.
Group 1, Configuration 2-3; Group 2, Configuration 3-4; Group 3, Configuration 3-4; Group 4, Configuration
3-4:
Work Package 19: More work. Do a detailed inspection of the selected fasteners in the left main fuel tank rear
spar. If all the fasteners are cap sealed then no more work is necessary. If any of the fasteners are not cap
sealed, cap seal the fasteners.
Group 1, Configuration 2-3; Group 2, Configuration 3-4; Group 3, Configuration 3-4; Group 4, Configuration
3-4:
Work Package 20: More work. Do a detailed inspection of the selected fasteners in the right main fuel tank rear
spar. If all the fasteners are cap sealed then no more work is necessary. If any of the fasteners are not cap
sealed, cap seal the fasteners.
Group 20, Configuration 2-3; Group 24, Configuration 2-3; Group 28, Configuration 2-3; Group 35,
Configuration 2-3; Group 40, Configuration 2-3; Group 45, 70, Configuration 2; Group 70, Configuration
3:
Work Package 21: More Work. Install Teflon sleeve under the selected wire bundle clamps in the left rear wing
spar.
Group 20, 24, 28, 35, 40, 70, Configuration 4:
Work Package 22: More work. Install Teflon sleeve under the selected wire bundle clamps in the left rear wing
spar.
Group 1-47, 49-70, 72, 74-75:
Work Package 23: More Work. Install Teflon sleeve under the selected wire bundle clamps in the left and right
forward wing-to-body fairings and left and right Environmental Control System (ECS) bays.
Group 22-23, 27, 31, 34, 39-40, 45-46, 48, 69, 71-73, 76-83:
Work Package 24: More Work. Do a detailed inspection of the selected Teflon sleeve installed under the wire
bundle clamps in the left and right forward wing-to-body fairings and left and right Environmental Control System
(ECS) bays. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any
of the wire bundle clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle
clamps.
Group 1-47, 49-70, 72, 74-75:
Work Package 25: More Work. Install Teflon sleeve under the selected wire bundle clamps in the left and right
side rear spar bulkhead.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
20 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 21

Group 48, 71, 73, 76-83:
Work Package 26: More Work. Do a detailed inspection of the selected Teflon sleeve installed under the wire
bundle clamps in the left and right side rear spar bulkhead. If the wire bundle clamps have the Teflon sleeve
installed then no more work is necessary. If any of the wire bundle clamps do not have the Teflon sleeve installed,
install Teflon sleeve under the wire bundle clamps.
Group 1-20, 22-29, 31-32, 34-35, 37, 39-43, 45-47, 49-70, 72-81, 83:
Work Package 27: More Work. Install Teflon sleeve under the selected wire bundle clamps in the front spar
bulkhead.
Group 1-4, 8:
Work Package 28: More Work. Do a detailed inspection of the selected Teflon sleeve installed under the wire
bundle clamps in the front spar bulkhead. If the wire bundle clamps have the Teflon sleeve installed then no
more work is necessary. If any of the wire bundle clamps do not have the Teflon sleeve installed, install Teflon
sleeve under the wire bundle clamps.
Group 1-47, 49-70, 72, 74-75:
Work Package 29: More Work. Install Teflon sleeve under the selected wire bundle clamps in the left wing
inboard front spar.
Group 48, 71, 73, 76-83:
Work Package 30: More Work. Do a detailed inspection of the selected wire bundle clamps in the left wing
inboard front spar. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary.
If any of the wire bundle clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire
bundle clamps.
Group 1-47, 49-70, 72, 74-75:
Work Package 31: More Work. Install Teflon sleeve under the selected wire bundle clamps in the right wing
inboard and outboard front spar.
Group 48, 71, 73, 76-83:
Work Package 32: More Work. Do a detailed inspection of the selected wire bundle clamps in the right wing
inboard front spar. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary.
If any of the wire bundle clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire
bundle clamps.
Group 6-28, 30-35, 37, 39-43, 45-47, 49-70, 72-79:
Work Package 33: More Work. Install Teflon sleeve under the selected wire bundle clamps in the left wing rear
spar.
Group 1-47, 49-70, 72-75:
Work Package 34: More Work. Install Teflon sleeve under the selected wire bundle clamps in the right wing rear
spar.
Group 48, 71, 73, 76-83:
Work Package 35: More Work. Do a detailed inspection of the selected wire bundle clamps in the right wing
rear spar. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any of
the wire bundle clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle
clamps.
Work Package 36: More Work. Do a detailed inspection of the selected fasteners in the center fuel tank. If all
the fasteners are cap sealed then no more work is necessary. If any of the fasteners are not cap sealed, cap
seal the fasteners.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
21 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 22

Group 1-11, 13, 42-43, 49-54, 56, 58:
Work Package 37: More Work. Cap seal the selected fasteners in the left main fuel tank.
Work Package 38: More Work. Do a detailed inspection of the selected fasteners in the left main fuel tank. If all
the fasteners are cap sealed then no more work is necessary. If any of the fasteners are not cap sealed, cap
seal the fasteners.
Work Package 39: More Work. Do a detailed inspection of the selected fasteners in the right main fuel tank and
right center fuel cheek tank. If all the fasteners are cap sealed then no more work is necessary. If any of the
fasteners are not cap sealed, cap seal the fasteners.
EFFECTIVITY
777-200, 777-200LR, 777-300, 777-300ER, 777F Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of
affected airplanes.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2017-11-14 is related to this service bulletin.
The effective date of AD 2017-11-14 is July 11, 2017.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
NOTE: AD 2017-11-14 replaces AD 2011-26-03 and AD 2010-24-12.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4, Configuration
1-2:
Boeing recommends that the change given in this service bulletin be done within 60 months after the effective
date of AD 2010-24-12. The effective date of AD 2010-24-12 is January 20, 2011.
Group 1, Configuration 2-5; Group 2, Configuration 3-6; Group 3, Configuration 3-6; Group 4, Configuration
3-6; Group 5, Configuration 1-2; Group 6, Configuration 1-2; Group 7, Configuration 1-2; Group 8,
Configuration 1-2; Group 9, Configuration 1-2; Group 10, Configuration 1-2; Group 11, Configuration
1-2; Group 12, Configuration 1-2; Group 13, Configuration 1-2; Group 14, Configuration 1-2; Group 15,
Configuration 1-2; Group 16, Configuration 1-2; Group 17, Configuration 1-2; Group 18, Configuration
1-2; Group 19, Configuration 1-2; Group 20, Configuration 1-2; Group 21, Configuration 1-2; Group 22,
Configuration 1-2; Group 23, Configuration 1-2; Group 24, Configuration 1-2; Group 25, Configuration
1-2; Group 26, Configuration 1-2; Group 27, Configuration 1-2; Group 28, Configuration 1-2; Group 29,
Configuration 1-2; Group 30, Configuration 1-2; Group 31, Configuration 1-2; Group 32, Configuration
1-2; Group 33, Configuration 1-2; Group 34, Configuration 1-2; Group 35, Configuration 1-2; Group 36,
Configuration 1-2; Group 37, Configuration 1-2; Group 38, Configuration 1-2; Group 39, Configuration
1-2; Group 40, Configuration 1-2; Group 41, Configuration 1-2; Group 42, Configuration 1-2; Group 43,
Configuration 1-2; Group 44-45, 49, Configuration 1; Group 49, Configuration 2; Group 50, Configuration
1-2; Group 51, Configuration 1-2; Group 52, Configuration 1-2; Group 53, Configuration 1-2; Group 54,
Configuration 1-2; Group 55, Configuration 1-2; Group 56, Configuration 1-2; Group 57, Configuration
1-2; Group 58, Configuration 1-2; Group 59, Configuration 1-2; Group 60, Configuration 1-2; Group 61,
Configuration 1-2; Group 62, Configuration 1-2; Group 63, Configuration 1-2; Group 64, Configuration
1-2; Group 65, Configuration 1-2; Group 66, Configuration 1-2; Group 67, Configuration 1-2; Group 68,
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
22 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 23

Configuration 1-2; Group 69, Configuration 1-2; Group 70, Configuration 1-2; Group 71, Configuration
1:
Boeing recommends that the change given in this service bulletin be done within 60 months after the effective
date of AD 2017-11-14. The effective date of AD 2017-11-14 is July 11, 2017.
Group 5-20, Configuration 3; Group 20, Configuration 4; Group 21-24, Configuration 3; Group 24,
Configuration 4; Group 25-28, Configuration 3; Group 28, Configuration 4; Group 29-35, Configuration
3; Group 35, Configuration 4; Group 36-40, Configuration 3; Group 40, Configuration 4; Group 41-43,
Configuration 3; Group 44-45, Configuration 2; Group 46-48, Configuration 1; Group 49-70, Configuration
3; Group 70, Configuration 4; Group 71, Configuration 2; Group 72-79, Configuration 1:
Boeing recommends that the change given in this service bulletin be done within 60 months after the Revision
5 date of this service bulletin.
Group 1, Configuration 6-7; Group 2, Configuration 7-8; Group 3, Configuration 7-8; Group 4, Configuration
7-8; Group 5-19, Configuration 4; Group 20, Configuration 5; Group 21-23, Configuration 4; Group 24,
Configuration 5; Group 25-27, Configuration 4; Group 28, Configuration 5; Group 29-34, Configuration
4; Group 35, Configuration 5; Group 36-39, Configuration 4; Group 40, Configuration 5; Group 41-43,
Configuration 4; Group 44-45, Configuration 3; Group 46-48, Configuration 2; Group 49-69, Configuration
4; Group 70, Configuration 5; Group 71, Configuration 3; Group 72-79, Configuration 2; Group 80-83:
Boeing recommends that the change given in this service bulletin be done within 60 months after the Revision
6 date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for 777 airplanes in warranty as of August 18, 2014. Please refer to
Paragraph 2.B., Industry Support Information. The warranty remedies will expire eight years from the Revision
6 release date of this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
23 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 24 (OCR)

BOEING SERVICE BULLETIN 777-57A0050
ALERT  ALERT
RIGHT WING REAR SPAR
RIGHT MAIN
FUEL TANK
RIGHT WING  BODY CENTER
FRONT SPAR  FUEL TANK
LEFT MAIN
FRONT SPAR  FUEL TANK
BULKHEAD  LEFT WING
REAR SPAR
LEFT WING
D  UNDER WING FRONT SPAR
FAIRING
GROUP 1-20, 22-29, 31-32, 34-35, 37, 39-43, 45-47, 49-70, 72, 74-75:
INSTALL TEFLON SLEEVING AROUND WIRE BUNDLES AND STRING TIE AT SELECTED CLAMP
LOCATIONS ON THE WING FRONT/REAR SPARS, UNDER WING FAIRING, ENVIRONMENTAL
CONTROL SYSTEM (ECS) BAY, FRONT SPAR BULKHEAD AND REAR SPAR BULKHEAD.
GROUPS 21, 30, 33, 36, 38, 44, 48, 71, 82:
INSTALL TEFLON SLEEVING AROUND WIRE BUNDLES AND STRING TIE AT SELECTED CLAMP
LOCATIONS ON THE WING FRONT/REAR SPARS, UNDER WING FAIRING, ECS BAY AND REAR SPAR
BULKHEAD.
GROUPS 1-4, 8:
DO A DETAILED INSPECTION OF THE SELECTED WIRE BUNDLE CLAMP LOCATIONS ON THE FRONT
SPAR BULKHEAD. INSTALL TEFLON SLEEVING IF ANY CLAMP DOES NOT HAVE TEFLON SLEEVING
INSTALLED.
GROUPS 8-12, 17, 20, 22, 23, 25, 27, 31, 34, 39, 40, 42-43, 45-46, 51-57, 69, 72:
DO A DETAILED INSPECTION OF THE SELECTED WIRE BUNDLE CLAMP LOCATIONS IN THE ECS
BAY. INSTALL TEFLON SLEEVING IF ANY CLAMP DOES NOT HAVE TEFLON SLEEVING
INSTALLED.
GROUPS 48, 71, 73, 76-83:
DO A DETAILED INSPECTION OF THE SELECTED WIRE BUNDLE CLAMP LOCATIONS ON THE WING
FRONT/REAR SPARS, IN THE UNDER WING FAIRING, ECS BAY AND REAR SPAR BULKHEAD.
INSTALL TEFLON SLEEVING IF ANY CLAMP DOES NOT HAVE TEFLON SLEEVING INSTALLED.
GROUPS 1-4:
CAP SEAL SELECTED FASTENERS IN THE BODY CENTER AND MAIN FUEL TANKS.
GROUPS 5-11, 13, 42-43, 49-54, 56-58:
CAP SEAL SELECTED FASTENERS IN THE MAIN FUEL TANKS.
GROUPS 1-83:
DO A DETAILED INSPECTION OF SELECTED FASTENERS IN THE BODY CENTER AND MAIN FUEL
TANKS FOR CAP SEALING. CAP SEAL SELECTED FASTENERS IF ANY FASTENER IS NOT CAP
SEALED.  J36122
Original Issue: January 26, 2006
Revision 6: August 18, 2021  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  777-57A0050
Work - See page 1 for detalls.  24 of 857

### Page 25

Commercial 
Airplanes
777
Service Bulletin
ALERT
Number: 777-57A0050
Original Issue: January 26, 2006
Revision 6: August 18, 2021
ATA System: 5710
SUBJECT: WINGS - Center and Outer Wings - Wire Bundle Teflon sleeve Installation and Fastener
Cap Sealing for Fuel Tank Wiring Hot Short Protection
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This bulletin is applicable to 777-200, 777-200LR, 777-300, 777-300ER, 777F Airplane(s), line
number(s) 1-1566, 1568-1573, 1575-1580, 1582-1586, 1588-1604, 1606-1610, 1612-1614,
1616-1619, 1621-1623, 1625-1628, 1630-1632, 1634-1637, 1639-1641, 1643-1646, 1648-1650,
1652-1655, 1657-1658, 1660-1667, 1669 in 83 Group(s). Where the effectivity is presented with
hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g.
line numbers 1-9 means line numbers 1 through 9 inclusive.
Refer to Service Bulletin Index D624W001 Part 3 for Airplane Variable Number, Line Number and
Serial Number Data.
The Variable Numbers and Group Information for the applicable airplanes is given below. An
equivalent change is on subsequent production airplanes. Refer to PRR 62777-120RS, PRR
61998-4 and MRR 757017-020 for data about this change.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
25 of 857

### Page 26

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes before line number 504.-1
Airplanes that have not accomplished Boeing SB 777-57A0050
Original Issue, Revision 1, Revision 2, Revision 3, Revision 4 or
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Original
Issue.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
1.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
2.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3.
5
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4.
6
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
26 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 27

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes before line number 504.-2
Airplanes with a W5164 wire bundle at the front spar bulkhead, that
have not accomplished Boeing SB 777-57A0050 Original Issue,
Revision 1, Revision 2, Revision 3, Revision 4 or Revision 5.
1
Airplanes without a W5164 wire bundle at the front spar bulkhead,
that have not accomplished Boeing SB 777-57A0050 Original Issue,
Revision 1, Revision 2, Revision 3, Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Original
Issue.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
1.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
2.
5
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3.
6
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4.
7
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
27 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 28

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes before line number 504.-3
Airplanes with a W5164 wire bundle at the front spar bulkhead, that
have not accomplished Boeing SB 777-57A0050 Original Issue,
Revision 1, Revision 2, Revision 3, Revision 4 or Revision 5.
1
Airplanes without a W5164 wire bundle at the front spar bulkhead,
that have not accomplished Boeing SB 777-57A0050 Original Issue,
Revision 1, Revision 2, Revision 3, Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 original
issue.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
1.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
2.
5
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3.
6
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4.
7
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
28 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 29

DESCRIPTIONCONFIGURATIONGROUP
777-300 airplanes before line number 504.-4
Airplanes with a W5164 wire bundle at the front spar bulkhead, that
have not accomplished Boeing SB 777-57A0050 Original Issue,
Revision 1, Revision 2, Revision 3, Revision 4 or Revision 5.
1
Airplanes without a W5164 wire bundle at the front spar bulkhead,
that have not accomplished Boeing SB 777-57A0050 Original Issue,
Revision 1, Revision 2, Revision 3, Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Original
Issue.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
1.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
2.
5
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3.
6
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4.
7
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
8
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-5
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
29 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 30

DESCRIPTIONCONFIGURATIONGROUP
777-300 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-6
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-7
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-8
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
30 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 31

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-9
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-10
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-11
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
31 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 32

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-12
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300 airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-13
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-14
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
32 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 33

DESCRIPTIONCONFIGURATIONGROUP
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-15
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-16
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-17
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
33 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 34

DESCRIPTIONCONFIGURATIONGROUP
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-18
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-19
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplane line number 504 and after line number 504 that
needs wire bundle sleeving inspection/installation.
-20
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have not done Work Package 21 or Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have done Work Package 21 but not Revision 5.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
34 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 35

DESCRIPTIONCONFIGURATIONGROUP
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-21
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-22
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-23
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
35 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 36

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes line number 504 and after line number 504 that
need wire bundle sleeving inspection/installation.
-24
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have not done Work Package 21 or Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have done Work Package 21 but not Revision 5.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
5
777-200 airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-25
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-26
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
36 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 37

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-27
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes line number 504 and after line number 504 that
need wire bundle sleeving inspection/installation.
-28
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have not done Work Package 21 or Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have done Work Package 21 but not Revision 5.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
5
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-29
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
37 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 38

DESCRIPTIONCONFIGURATIONGROUP
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-30
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-31
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-32
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
38 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 39

DESCRIPTIONCONFIGURATIONGROUP
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-33
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-34
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-35
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have not done Work Package 21 or Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have done Work Package 21 but not Revision 5.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
39 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 40

DESCRIPTIONCONFIGURATIONGROUP
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-36
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-37
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-38
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
40 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 41

DESCRIPTIONCONFIGURATIONGROUP
777-200LR airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-39
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-40
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have not done Work Package 21 or Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have done Work Package 21 but not Revision 5.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
5
777-200LR airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-41
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
41 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 42

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-42
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplane after line number 504 that needs wire bundle
sleeving inspection/installation.
-43
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-44
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
3
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
42 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 43

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-45
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
3
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-46
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-47
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777F airplanes after line number 504 that need wire bundle sleeving
inspection / installation.
-48
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
43 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 44

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-49
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-50
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-51
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
44 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 45

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-52
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-53
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-54
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
45 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 46

DESCRIPTIONCONFIGURATIONGROUP
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-55
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-56
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-57
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
46 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 47

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-58
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-59
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-60
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
47 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 48

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-61
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-62
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-63
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
48 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 49

DESCRIPTIONCONFIGURATIONGROUP
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-64
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-65
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-66
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
49 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 50

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-67
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200 airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-68
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-69
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
50 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 51

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection/installation.
-70
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 3, Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
3 but not Revision 4 or Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have not done Work Package 21 or Revision 5.
3
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 and have done Work Package 21 but not Revision 5.
4
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
5
777F airplanes after line number 504 that need wire bundle sleeving
inspection/installation.
-71
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 4 or Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
4 but not Revision 5.
2
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
3
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-72
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-73
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
51 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 52

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-74
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-75
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-76
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-77
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-78
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
52 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 53

DESCRIPTIONCONFIGURATIONGROUP
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-79
Airplanes that have not accomplished Boeing SB 777-57A0050
Revision 5.
1
Airplanes that have accomplished Boeing SB 777-57A0050 Revision
5.
2
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-80
777-300ER airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-81
777F airplanes after line number 504 that need wire bundle sleeving
inspection / installation.
-82
777-200LR airplanes after line number 504 that need wire bundle
sleeving inspection / installation.
-83
Airplane Models:
777-200, 777-200LR, 777-300, 777-300ER, 777F
GroupVariable Number
1WA001 - WA017
1WA076 - WA080
1WA086 - WA093
1WA101 - WA104
1WA116 - WA119
1WA131 - WA137
1WA171 - WA175
1WA196 - WA198
1WA206 - WA212
1WA221 - WA223
1WA231 - WA232
1WA241 - WA250
1WA261 - WA266
1WA281
8WA282
GroupVariable Number
17WA283
1WA301 - WA302
8WA303 - WA304
2WB001 - WB021
2WB031 - WB046
2WB051 - WB088
2WB101 - WB106
2WB121 - WB125
2WB131 - WB139
10WB140 - WB141
55WB142
12WB143 - WB148
2WB151 - WB155
2WB161 - WB177
2WB181 - WB194
GroupVariable Number
2WB201 - WB215
2WB231 - WB247
2WB271 - WB273
2WB276 - WB286
2WB291 - WB302
2WB306 - WB307
2WB311 - WB337
2WB341 - WB342
2WB366 - WB367
10WB368
2WB371 - WB388
2WB406
2WB411 - WB413
2WB416 - WB437
42WB438
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
53 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 54

GroupVariable Number
43WB439
2WB446 - WB453
2WB476
2WB481 - WB484
4WB501 - WB510
6WB511
13WB512
4WB531 - WB537
4WB551 - WB554
4WB591 - WB597
4WB601 - WB606
4WB611 - WB620
6WB621 - WB622
4WB631 - WB638
4WB646 - WB649
2WC051 - WC073
2WC101 - WC104
2WC111 - WC115
10WC116
11WC117
12WC118 - WC120
57WC221 - WC222
68WC223 - WC224
2WC241 - WC243
2WC281 - WC290
2WC301 - WC306
10WC307 - WC308
2WC361 - WC362
51WC363 - WC364
2WC371 - WC374
2WC381 - WC390
52WC391 - WC393
12WC394 - WC395
GroupVariable Number
2WC441
2WC446 - WC448
12WC449
2WC456
9WC457
10WC458
12WC459
10WC486 - WC488
11WC489
53WC490 - WC491
12WC492 - WC493
54WC506 - WC507
12WC508
11WC521
53WC522
12WC531
56WC532
12WC533 - WC536
12WC546 - WC547
20WC548
12WC556
12WC566 - WC567
23WC571 - WC572
27WC573 - WC574
25WC581
40WC586
45WC587
40WC591 - WC592
45WC593 - WC595
5WD001 - WD002
15WD011 - WD013
63WD014 - WD015
65WD016 - WD018
GroupVariable Number
18WD031 - WD032
15WD033 - WD036
18WD046
15WD047 - WD054
64WD055
15WD066 - WD067
64WD068 - WD073
26WD074 - WD075
63WD081
22WD082 - WD086
31WD087 - WD088
39WD089
32WD091
31WD096
34WD101 - WD102
69WD103 - WD105
72WD106
34WD111
73WD112
37WD116
41WD117
46WD121 - WD122
83WD156
3WD501 - WD502
7WD503 - WD504
14WD505 - WD506
16WD507
60WD508 - WD510
24WD511 - WD513
3WD521 - WD529
7WD530 - WD533
16WD534 - WD537
60WD538 - WD539
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
54 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 55

GroupVariable Number
62WD540
24WD541
50WD546
58WD547 - WD548
14WD549 - WD550
16WD551 - WD552
24WD553 - WD554
3WD561
7WD562 - WD564
58WD565
59WD566 - WD568
66WD569 - WD571
67WD572
61WD573
7WD581 - WD587
50WD588
14WD589 - WD590
16WD591 - WD594
60WD595 - WD596
62WD597 - WD599
7WD606 - WD607
14WD608 - WD609
7WD621 - WD625
50WD626
14WD627 - WD629
16WD630 - WD632
7WD651 - WD652
58WD653
14WD654
16WD655 - WD658
19WD659
60WD660 - WD662
24WD663 - WD664
GroupVariable Number
29WD665
49WD671 - WD675
24WD676
35WD677
14WD691 - WD696
16WD697 - WD701
19WD702 - WD704
60WD705 - WD709
16WD741 - WD745
19WD746
60WD747 - WD750
62WD751
24WD752
16WD761 - WD768
19WD769 - WD770
24WD771
14WD786
16WD787
19WD788
16WD796 - WD799
19WD800 - WD802
60WD803 - WD805
62WD806
24WD807 - WD811
28WD812
29WD813
35WD814 - WD819
47WD820 - WD825
16WD826 - WD828
60WD829 - WD830
24WD831 - WD834
29WD835 - WD837
16WD846
GroupVariable Number
19WD847 - WD848
60WD849 - WD852
62WD853
24WD854 - WD860
28WD861
35WD862 - WD867
16WD871
19WD872
60WD873 - WD875
62WD876
24WD877 - WD880
28WD881
29WD882
35WD883 - WD888
47WD889 - WD895
77WD896 - WD904
80WD905 - WD910
19WD911 - WD912
24WD913 - WD914
35WD915 - WD917
47WD918
24WD921 - WD922
35WD923 - WD925
47WD926 - WD930
77WD931 - WD935
60WD936 - WD939
35WD940 - WD942
47WD943 - WD945
62WD946
24WD947 - WD948
29WD949 - WD951
35WD952 - WD955
47WD956 - WD957
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
55 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 56

GroupVariable Number
60WD966 - WD967
62WD968
24WD969
29WD970
62WD981 - WD982
24WD986 - WD987
35WD991 - WD992
47WD993 - WD994
78WD995
35WD996
24WE001 - WE002
29WE003 - WE004
77WE005 - WE007
29WE011 - WE012
24WE021
29WE022 - WE023
35WE024 - WE026
35WE031 - WE034
77WE035 - WE040
35WE051 - WE055
47WE056
77WE057
29WE071
35WE072
47WE073 - WE077
77WE078
29WE081
35WE082 - WE084
35WE091 - WE093
47WE094 - WE095
29WE126 - WE127
70WE128 - WE137
76WE138 - WE140
GroupVariable Number
47WE141 - WE142
74WE143
47WE144 - WE145
77WE146 - WE150
35WE151 - WE160
47WE161 - WE169
77WE170
78WE171 - WE174
80WE175
70WE176 - WE177
75WE178
35WE186 - WE204
47WE205 - WE214
77WE215
35WE216 - WE217
47WE218 - WE219
35WE226 - WE230
47WE231
35WE236 - WE240
47WE241 - WE245
77WE246 - WE250
35WE251 - WE253
35WE261
47WE262 - WE266
77WE267
35WE271 - WE272
47WE273 - WE278
47WE291 - WE293
77WE294 - WE298
35WE301
47WE302 - WE313
77WE314 - WE320
47WE331 - WE340
GroupVariable Number
77WE341 - WE345
78WE346
80WE347 - WE350
47WE351 - WE352
74WE353
47WE354 - WE356
80WE366 - WE368
47WE376 - WE377
47WE381
47WE386 - WE387
77WE391 - WE392
47WE396
77WE397 - WE405
80WE406 - WE411
47WE416 - WE420
47WE426
77WE427 - WE431
47WE436 - WE437
77WE438 - WE440
47WE441
77WE442 - WE446
77WE451 - WE465
78WE466 - WE469
80WE470
77WE471 - WE478
80WE479 - WE484
76WE486 - WE493
76WE495 - WE498
79WE499
77WE501 - WE504
77WE511 - WE516
77WE526 - WE528
77WE536 - WE548
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
56 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 57

GroupVariable Number
78WE549
77WE556 - WE569
78WE570
80WE571
77WE576 - WE581
78WE582 - WE583
80WE584 - WE587
76WE591
77WE601 - WE605
76WE626 - WE627
77WE631
77WE641 - WE642
77WE646
78WE647
77WE651 - WE659
78WE660 - WE661
78WE666 - WE674
80WE675 - WE677
80WE681 - WE689
77WE701
78WE702 - WE705
77WE711
78WE712
77WE731
78WE732
79WE736 - WE740
79WE746 - WE749
81WE750
78WE751 - WE764
80WE765 - WE772
78WE776 - WE783
80WE784 - WE785
78WE786
GroupVariable Number
78WE791 - WE792
78WE796
80WE797 - WE798
80WE801 - WE806
80WE811 - WE812
80WE826 - WE828
80WE831 - WE835
80WE851 - WE853
80WE856
80WE861
21WF001 - WF004
21WF016 - WF019
30WF020
38WF021
44WF022 - WF023
48WF024 - WF027
82WF028 - WF029
21WF031 - WF032
38WF033 - WF035
44WF036 - WF041
48WF042 - WF043
21WF046 - WF049
30WF050 - WF051
33WF052 - WF053
36WF054 - WF055
38WF056 - WF064
44WF065 - WF066
48WF067 - WF068
82WF069 - WF074
38WF075
21WF076 - WF077
21WF081 - WF084
30WF085 - WF086
GroupVariable Number
33WF087
36WF088
21WF096 - WF097
30WF098 - WF099
36WF100 - WF101
21WF106 - WF107
38WF108 - WF109
30WF111 - WF112
38WF113 - WF114
44WF115 - WF116
48WF117 - WF120
33WF121
36WF122
38WF123 - WF124
36WF131
44WF132 - WF133
48WF134 - WF135
38WF136 - WF137
44WF138 - WF139
48WF140 - WF144
38WF146 - WF147
38WF151 - WF152
44WF156 - WF159
48WF160
82WF161 - WF165
44WF166 - WF169
71WF170
48WF171 - WF173
48WF176 - WF179
82WF180
48WF181 - WF184
48WF191
82WF201
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
57 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 58

GroupVariable Number
48WF206 - WF207
82WF208 - WF215
48WF216
82WF217
82WF221 - WF225
GroupVariable Number
82WF231 - WF244
82WF246 - WF248
82WF256 - WF258
82WF261 - WF262
82WF266 - WF273
GroupVariable Number
82WF281 - WF284
82WF286 - WF288
82WF321
--
--
2. Spares Affected
None.
B. Concurrent Requirements
The Airworthiness Limitations (AWLs) listed below must be added to the airplane's maintenance program
before or at the same time as this service bulletin:
DescriptionAWLDocumentCompany
Cushion Clamps and Teflon Sleev-
ing Installed on Out-of-Tank Wire
Bundles Installed on Brackets that
are Mounted Directly on the Fuel
Tanks
28-AWL-31777 Maintenance Planning
Data (MPD) Document,
Section 9, Airworthiness
Limitations (AWLs) and
Certification Maintenance
Requirements (CMRs),
D622W001-9, Revision
February 2021 or later ap-
proved revision
Boeing
Cushion Clamps and Teflon Sleev-
ing Installed on Out-of-Tank Wire
Bundles Installed on Brackets that
are Mounted Directly on the Fuel
Tanks
28-AWL-32
C. Reason
This service bulletin will help to prevent possible sources of ignition within the fuel tanks caused by
wiring shorts at the clamp locations on the wire bundles that are routed on the fuel tank boundary
structure. An ignition source within the fuel tanks could result in a fire or an explosion.
This service bulletin is the result of the safety assessments conducted by Boeing under SFAR 88, "Fuel
Tank System Fault Tolerance Evaluation Requirements". This service bulletin addresses the concerns
of electrical arcing that can be caused by the electrical energy present in the wire bundles within the
fuel tank boundary structure. Seven operators have reported pinched insulation or wiring damage under
the clamp. In some cases, bared wires were found. This condition can cause an electrical arcing on
the fuel tank boundary structure or the voltage can find a path to permanent fasteners that penetrate
through the fuel tank and creates an electrical arcing inside the fuel tank. This service bulletin provides
instructions to install Teflon sleeve under the wire bundle clamps and cap seal the penetrating fasteners
that were determined to have a capability of creating electrical arcing during a wiring short event.
Airworthiness Limitations (AWL) 28-AWL-31 and 28-AWL-32 in the section 9 of the Maintenance
Planning Data (MPD) Document D622W001-9 are related to this service bulletin.
Boeing Service Related Problem (SRP) 777-SRP-28-0203 is related to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
58 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 59

Revision 1 was sent to include these changes: For Group 1, 2 and 4 airplane only, include additional
clamp locations that require Teflon sleeve and fastener that requires to be cap sealed. Include lacing
tape as a material that needs to be supplied by the operator, clarify access panel numbers and clarify
the wiring configuration at the front spar bulkhead.
Revision 2 was sent to correct the quantity of fasteners that need to be cap sealed, and to give a
tolerance to the dimensions for Teflon sleeve installation. Also, a note is added to tell operators that if
ring posts are installed at the locations where the installation of Teflon sleeve on the wire bundles is
necessary, the ring posts must be replaced with clamps.
Revision 3 was sent to correct discrepancies found by operators during the accomplishment of this
service bulletin. Also, more wire bundle clamp locations that need Teflon sleeve installation are added.
These clamp configuration changes are necessary to help prevent a possible ignition source within the
fuel tanks caused by wiring shorts.
Revision 4 was sent to add some wire bundle W8173 clamp locations in the left wing rear spar that
need Teflon sleeve installation. Also, some discrepancies in the compliance data, and in the
Accomplishment Instructions and Figure group applicability data are corrected. Airplanes WF022-WF023,
WF036-WF041, WF065-WF066, WF115-WF116, WF132-WF133, WF138-WF139, WF156-WF159,
WF166-WF170 are added to a new Group 44, and airplanes WC587, WC593-WC595 are added to a
new Group 45 of this service bulletin effectivity. These airplanes need to do a detailed inspection of
the selected wire bundle clamps in the front spar bulkhead, to make sure that Teflon sleeve is installed.
Revision 5 was sent because Boeing has discovered that some airplanes did not have wire bundle
protective (Teflon) sleeving installed under clamp locations at multiple locations on the left wing inboard
rear spar in production. As a result of this discovery, these airplanes have been added to the service
bulletin effectivity in new Groups 46, 47, and 48. Groups 8 and 44-48 have been added to the applicability
of Work Package 8, which requires airplanes to inspect and install wire bundle protective (Teflon)
sleeving at missing locations.
In addition, Work Package 22 has been added for airplanes in Groups 20, 24, 28, 35 and 40, that have
accomplished Revision 4 of this service bulletin, to make sure that protective (Teflon) sleeving is installed
at some additional locations on the left wing inboard rear spar. Also, Groups 44 and 45, plus airplanes
in Groups 5-43 that have accomplished Revision 4 but not Work Package 21, have been added to the
applicability of Work Package 21. This revision also adds a reference to the new Federal Aviation
Administration (FAA) Airworthiness Directive and updates the Industry Support Information for some
airplanes.
Revision 6 is sent because Boeing has discovered that some airplanes did not have wire bundle
protective (Teflon) sleeving installed under clamp locations at multiple locations in the airplane. As a
result of this, these airplanes have been added to the service bulletin effectivity in new Groups 80, 81,
82, and 83. Work Packages 23 thru 39 have been added for more wire bundle locations that require
(Teflon) sleeving and fasteners that require to be cap sealed for new and existing Groups. Some existing
airplanes have been moved to new groups where locations of the Teflon Sleeve required are different.
As an alternative to installing (Teflon) sleeving, an option to replace existing clamps with BACC10NA(
) plastic clamps or ringposts with hardware in pressurized areas of the airplane is given.
In addition, multiple locations in the airplane that were previously found to need (Teflon) sleeving did
not need the protective sleeving and are removed from the work instructions as a result. Existing Work
Packages and Figures have been updated and Work Package 17 is deleted. Airplanes that have already
installed (Teflon) sleeving at these locations do not need to remove the installed Teflon sleeve.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
59 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

### Page 60

D. Description
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4,
Configuration 1-2:
Work Package 1: Install Teflon sleeve under the selected clamps on the wire bundles in the wing rear
spars.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4,
Configuration 1-2:
Work Package 2: Install Teflon sleeve under the selected clamps on the wire bundles in the wing
inboard and outboard front spars.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4,
Configuration 1-2:
Work Package 3: Install Teflon sleeve under the selected clamps on the wire bundles in the wing-to-body
fairings and left/right Environmental Control System (ECS) bays.
Group 2, Configuration 1-2; Group 3, Configuration 1-2; Group 4, Configuration 1-2:
Work Package 4: Install Teflon sleeve under the selected clamps on the wire bundles in the front spar
bulkhead.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4,
Configuration 1-2:
Work Package 5: Cap seal the selected fasteners in the center wing fuel tanks.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4,
Configuration 1-2:
Work Package 6: Cap seal the selected fasteners in the left main and surge fuel tank.
Group 1-2, Configuration 1; Group 2, Configuration 2; Group 3, Configuration 1-2; Group 4,
Configuration 1-2:
Work Package 7: Cap seal the selected fasteners in the right main and surge fuel tank.
Group 5-7, 9-43, 45-47, 49-70, 72-79, Configuration 1:
Work Package 8: Do a detailed inspection of the selected wire bundle clamps in the left and right rear
wing spars as applicable. If the wire bundle clamps have the Teflon sleeve installed then no more work
is necessary. If any of the clamps do not have the Teflon sleeve installed, install Teflon sleeve under
the wire bundle clamps.
Group 32-34, 36, 69, Configuration 1:
Work Package 9: Do a detailed inspection of the selected wire bundle clamps in the right wing inboard
front spar. If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary.
If any of the clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle
clamps.
Group 12, 18, 20-21, 23, 25, 27, 30, 33, 36, 38, 40, 43-45, 53-57, 68, 71, Configuration 1:
Work Package 10: Do a detailed inspection of the selected wire bundle clamps in the front spar bulkhead.
If the wire bundle clamps have the Teflon sleeve installed then no more work is necessary. If any of
the clamps do not have the Teflon sleeve installed, install Teflon sleeve under the wire bundle clamps.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 26, 2006
777-57A0050Revision 6: August 18, 2021
60 of 857
BOEING SERVICE BULLETIN 777-57A0050
ALERTALERT

The text continues at https://openairdocs.org/service-documents/boeing/777-57a0050/file/d76557e93508.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
