# Boeing Service Bulletin A3183: Revision 6, from page 97

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0756; AD 2015-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin A3183](https://openairdocs.org/service-documents/boeing/a3183.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin 707-00A3183-06
- Pages: 106
- PDF: https://openairdocs.org/files/sha256/b4/4f/b44fc7db2675659669f7dab444875abef80d93cad0a92162e6c609d9917027e9
- Page: https://openairdocs.org/service-documents/boeing/a3183/file/b44fc7db2675

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 97

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each nacelle strut.
More DataQtyIdentificationNameTaskStep
(a)2-HoleDrill / Ream1
(b)2BACB30MB12-10BoltInstall (New)2
-2BACC30BH12CollarInstall (New)
(a) Oversize the holes to 0.371 - 0.375 inch diameter to remove fatigued metal in accordance with 707-
100/200 SRM 51-2-5 or 707-300/400 SRM 51-2-5.
(b) Install the fasteners common to the outboard side of the overwing support fitting and the wing front spar
upper chord.
FIGURE 13: NACELLE STRUT # 1, # 2, # 3 AND # 4 OUTBOARD SIDE OVERWING FASTENER
INSTALLATION
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 27, 1975
A3183Revision 6 February 07, 2014
97 of 106
BOEING SERVICE BULLETIN A3183
ALERTALERT

### Page 98

The parts shown below are changed by this service bulletin. The Quantity is the number of parts changed on
each airplane. Components or sub-assembly parts are indented. The Quantity of the indented part is the number
of parts used on the next higher assembly.
RCPNCNew Part NumberQuantityNameRUCExisting Part Number
CR, S50-8227-1 thru -10, -13
thru -20, -23 thru -28, -31
, -32, -3001, -3002, -3007
thru -3010
1 eachStrut Assembly -
Equipped
RWK50-8227-1 thru -10, -13
thru -20, -23 thru -28, -31
, -32, -3001, -3002, -3007
thru -3010
CR, S65-2510-1, -2, -3001 thru
-3016, -3019 thru -3030,
-3033, -3034, -3037 thru
-3042, -3049 thru -3056,
-3059 thru -3110
1 eachStrut Assembly -
Equipped
RWK65-2510-1, -2, -3001 thru
-3016, -3019 thru -3030,
-3033, -3034, -3037 thru
-3042, -3049 thru -3056,
-3059 thru -3110
CR, S.5-85617-3000 thru -
3002, -3008, -3009, -
3011, -3014
1 eachStrut Assembly -
Structure
RWK.5-85617-3000 thru -
3002, -3008, -3009, -
3011, -3014
CR, S65-2516, -11 eachStrut Assembly -
Structure
RWK.65-2516, -1
CR, S65-2516-3000, -3026, -
3027, -3030
1 eachStrut Assembly -
Structure
RWK.65-2516-3000, -3026, -
3027, -3030
CS65-2536-15 or -251Midspar FittingDIS..5-85658-3001
CS65-2536-16 or -261Midspar FittingDIS..5-85658-3002
CS65-2536-15 or -251Midspar FittingDIS..5-85658-3017
CS65-2536-16 or -261Midspar FittingDIS..5-85658-3018
CS65-2536-15 or -251Midspar FittingDIS.. 65-2536-1
CS65-2536-16 or -261Midspar FittingDIS.. 65-2536-2
CS65-2536-15 or -251Midspar FittingDIS.. 65-2536-4
CS65-2536-16 or -261Midspar FittingDIS.. 65-2536-5
CS65-2536-19 or -271Midspar FittingDIS.. 65-2536-7
CS65-2536-20 or -281Midspar FittingDIS.. 65-2536-8
CS65-2536-15 or -251Midspar Fitting As-
sembly
DIS.. 65-2536-9
CS65-2536-16 or -261Midspar Fitting As-
sembly
DIS.. 65-2536-10
AS65-27303-321 eachBushing - Standard
Size
DIS... 65-27303-27, -28, -29
CS65-27303-321 eachBushing - Under-
size I.D.
DIS... 65-99744-427, -428, -
429
APPENDIX A: EXISTING PARTS ACCOUNTABILITY
(SHEET 1 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 27, 1975
A3183Revision 6 February 07, 2014
98 of 106
BOEING SERVICE BULLETIN A3183
ALERTALERT

### Page 99

RCPNCNew Part NumberQuantityNameRUCExisting Part Number
CS66-1044-68Lug Shim - 0.001DIS66-1044
CS66-1044-74Lug Shim - 0.003DIS66-1044-1
CS66-1044-84Lug Shim - 0.006DIS66-1044-2
CS66-1044-94Lug Shim - 0.010DIS66-1044-3
CS66-1044-104Lug Shim - 0.016DIS66-1044-4
CS66-1044-114Lug Shim - 0.025DIS66-1044-5
RCPNCNew Part NumberQuantityNameRUCExisting Part Number
CR, S50-8228-1 thru -12, -15
thru -32, -3001, -3002, -
3007 thru -3014
1 eachStrut Assembly -
Equipped
RWK50-8228-1 thru -12, -15
thru -32, -3001, -3002, -
3007 thru -3014
CR, S65-2488-1, -2, -3001 thru
-3016, -3019 thru -3030,
-3033 thru -3042, -3049
thru 3128, -501, -502
1 eachStrut Assembly -
Equipped
RWK65-2488-1, -2, -3001 thru
-3016, -3019 thru -3030,
-3033 thru -3042, -3049
thru 3128, -501, -502
CR, S5-85627-3000, -3002, -
3003, -3009, -3010, -
3012, -3013, -3014, -
3015,
1 eachStrut Assembly -
Structure
RWK5-85627-3000, -3002, -
3003, -3009, -3010, -
3012, -3013, -3014, -
3015,
CR, S65-2494, -1, -30161 eachStrut Assembly -
Structure
RWK65-2494, -1, -3016
CR, S65-2494-3000, -3015, -
3019, -501
1 eachStrut Assembly -
Structure
RWK65-2494-3000, -3015, -
3019, -501
CS65-02534-211Midspar FittingDIS5-84467-3001
CS65-02534-221Midspar FittingDIS5-84467-3002
CS65-02534-211Midspar FittingDIS5-84467-3003
CS65-02534-221Midspar FittingDIS5-84467-3004
CS65-02534-211Midspar FittingDIS65-02534-1
CS65-02534-221Midspar FittingDIS65-02534-2
CS65-02534-211Midspar FittingDIS65-02534-4
CS65-02534-221Midspar FittingDIS65-02534-5
CS65-02534-191Midspar FittingDIS65-02534-7
CS65-02534-201Midspar FittingDIS65-02534-8
CS65-02534-211Midspar Fitting As-
sembly
DIS65-02534-9
APPENDIX A: EXISTING PARTS ACCOUNTABILITY
(SHEET 2 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 27, 1975
A3183Revision 6 February 07, 2014
99 of 106
BOEING SERVICE BULLETIN A3183
ALERTALERT

### Page 100

RCPNCNew Part NumberQuantityNameRUCExisting Part Number
CS65-02534-221Midspar Fitting As-
sembly
DIS65-02534-10
AS65-27303-331 eachBushing - Standard
Size
DIS65-27303-26
CS66-1051-68Lug Shim - 0.001DIS66-1051
CS66-1051-74Lug Shim - 0.003DIS66-1051-1
CS66-1051-84Lug Shim - 0.006DIS66-1051-2
CS66-1051-94Lug Shim - 0.010DIS66-1051-3
CS66-1051-104Lug Shim - 0.016DIS66-1051-4
CS66-1051-114Lug Shim - 0.025DIS66-1051-5
Recommended Use CodeRUC
Discard the part.DIS
Make the change as specified in this service bulletin.RWK
Part Number CodePNC
This is the part number after the change.R
This is the new equivalent or replacement part number.S
Replacement CodeRC
Replacement not permitted. Do not replace a new part with an existing part.A
Replacement permitted. However, if the existing part is used, it will cancel the effect of the change
specified in this service bulletin
C
APPENDIX A: EXISTING PARTS ACCOUNTABILITY
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 27, 1975
A3183Revision 6 February 07, 2014
100 of 106
BOEING SERVICE BULLETIN A3183
ALERTALERT

### Page 101 (OCR)

BOEING SERVICE BULLETIN А3183
ALERT  ALERT
NAC STA
260.64  125 MACHINE FINISH IN REWORK AREAS
BREAK ALL SHARP EDGES 0.02  0.03
0.44
0.42
NAC WL  A  15.0°  0.32
143.25  -50-8733-1
50-8733-5
50-8733-7
50-8733-9
R1.96  1.98  0.42  (2 LOCATIONS)  VIEW A-A
0.40
(2 LOCATIONS)  DETAIL 1
NAC STA
260.64
15.0°
NAC WL  → 0.25
143.25  • 50-8733-11
50-8733-13
50-8733-15
50-8733-17
VIEW B-B
(2 LOCATIONS)
DETAIL 2
NAC STA
260.64
NAC WL  15.0°  - 0.20
143.25  50-8733-19
$ 1.64  1.66  RO.50 TRUE  (2 LOCATIONS)  VIEW C-C  2173705
(TYPICAL)
(2 LOCATIONS)  DETAIL 3
APPENDIX B: NACELLE STRUT # 1 AND # 4 - DRAG FITTING - CHAMFER / RADIUS INSPECTION
(SHEET 1 OF 2)
Original Issue: June 27, 1975
Revision 6 February 07, 2014  Export Controlled ECCN: 9E991 - BOEING  A3183
PROPRIETARY - Copyright ® Unpublished
Work - See page 1 for details.  101 of 106

### Page 102 (OCR)

BOEING SERVICE BULLETIN А3183
ALERT  ALERT
NAC STA
0.67  260.64  125 MACHINE FINISH IN REWORK AREAS
0.65  0.45  0.4/  BREAK ALL SHARP EDGES  0.03
0.36  0.02
0.34
NAC WL
-143.25  15.0°  0.38
50-8732-1
R 2.13  50-8732-5  50-8732-7
(2 LOCATIONS)  • 0.51  50-8732-9  VIEW D-D
0.49  (2 LOCATIONS)
RO.50 TRUE  DETAIL 4
(TYPICAL)
NAC STA
260.64
0.69  0.47
0.67  0.45
NAC WL
143.25  15.0°  0.16
-50-8732-11
50-8732-13
R 2.35  , 2.37  (2 LOCATIONS)  VIEW E-E
(2 LOCATIONS)  DETAIL 5
NAC STA
260.64
0.21
0.19
NAC WL
143.25  15.0°  - 0.25
-50-8732-15
R 1.39  1.41  RO.50 TRUE  (2 LOCATIONS)  VIEW F-F  2173706
(2 LOCATIONS)  (TYPICAL)  DETAIL 6
APPENDIX B: NACELLE STRUT # 1 AND # 4 - DRAG FITTING - CHAMFER / RADIUS INSPECTION
(SHEET 2 OF 2)
Original Issue: June 27, 1975
Revision 6 February 07, 2014  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  A3183
Work - See page 1 for details.  102 of 106

### Page 103 (OCR)

BOEING SERVICE BULLETIN A3183
ALERT  ALERT
CHAMFER BOTH ENDS
I.D. 0.005-0.015 X 45048°
O.D. 0.005-0.015 x 45048°  42° (EXCEPT AS NOTED)
O.D. 0.030-0.035 x 12°12°  11° FOR -1,-2,-3,-4,-13,
-14,-15,-16 ONLY
*A"DIA. (O.D.)
(SEE TABLE)
"B"DIA. (I.D.)  DIM "C"
(SEE TABLE)  (SEE TABLE)
125 / ALL SURFACES
BREAK ALL SHARP CORNERS.
ALL DIAMETERS TO BE CONCENTRIC WITHIN
0.003 TOLERANCE IN RADIUS (T.I.R).
Inboard Strut - Drag Fitting - Straight Bushing - Non Plated
Part Number  Drag Fitting Hole Diameter  B  C
69-2860-1  1.3125 - 1.3126  1.3145  1.3145  1.186  1.160  0.77  0.77
(a)  1.3165  1.189  0.78
69-2860-2  1.3125 - 1.3126  1.3145  1.3145  1.186  1.160  0.79  0.79
(a)  1.3165  1.189  0.80
(a)  This part is required with Top Kit 65C13873-2.
APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES
(SHEET 1 OF 4)
Original Issue: June 27, 1975
Revision 6 February 07, 2014  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  A3183
Work - See page 1 for details.  103 of 106

### Page 104

Inboard Strut - Drag Fitting - Straight Bushing - Part Number - Plated (a)
CBA (After Plate)A (Before Plate)Drag Fitting Hole
Diameter
Part Number
0.79
0.80
0.791.192
1.221
1.2181.3461
1.3470
1.34611.3457
1.3462
1.34571.3445 - 1.344669-2860-50
(b)
0.92
0.93
0.921.192
1.221
1.2181.3461
1.3470
1.34611.3457
1.3462
1.34571.3445 - 1.344669-2860-51
(b)
0.97
0.98
0.971.192
1.221
1.2181.3461
1.3470
1.34611.3457
1.3462
1.34571.3445 - 1.344669-2860-59
(b)
(a) Cadmium plate in accordance with AMS-QQ-P-416, Type 1, Class 2. Plating optional on ID.
(b) This part is required with Top Kit 65C13873-1.
Outboard Strut - Drag Fitting - Straight Bushing - Non Plated
CBADrag Fitting Hole DiameterPart Number
0.80
0.81
0.801.090
1.127
1.1241.2520
1.2540
1.25201.2500 - 1.251069-2860-3
(a)
0.79
0.80
0.791.090
1.127
1.1241.2520
1.2540
1.25201.2500 - 1.251069-2860-4
(a)
(a) This part is required with Top Kit 65C13839-2.
Outboard Strut - Drag Fitting - Straight Bushing - Plated (a)
CBA (After Plate)A (Before Plate)Drag Fitting Hole
Diameter
Part Number
0.80
0.81
0.801.122
1.159
1.1561.2836
1.2845
1.28361.2832
1.2837
1.28321.2820 - 1.283069-2860-52
(b)
0.92
0.93
0.921.122
1.159
1.1561.2836
1.2845
1.28361.2832
1.2837
1.28321.2820 - 1.283069-2860-53
(b)
(a) Cadmium plate in accordance with AMS-QQ-P-416, Type 1, Class 2. Plating optional on ID.
(b) This part is required with Top Kit 65C13839-1.
APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES
(SHEET 2 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 27, 1975
A3183Revision 6 February 07, 2014
104 of 106
BOEING SERVICE BULLETIN A3183
ALERTALERT

### Page 105 (OCR)

BOEING SERVICE BULLETIN A3183
ALERT  ALERT
R. 030 MAX
CHAMFER  I.D. 0.005-0.015 × 45° 42°
48°
O.D. 0.005-0.015 × 45° 42°
Ø "D" O.D.
SEE TABLE
2.22
2.20 2.20
• "E" I.D.
"G"  SEE TABLE
SEE TABLE  • 0.0003
"F"
SEE TABLE
0.0005 A
125 / ALL SURFACES
BREAK ALL SHARP CORNERS 0.03:0.0089
Outboard Strut - Drag Fitting - Flanged Bushing - Plated (a)
Part Number  Drag Fitting  D (Before Plate)  D (After Plate)  E  F  G
Hole Diameter  +/-  +0.010
0.005  -0.000
69-42475-5  1.2820 - 1.2830  1.2832  1.2832  1.2836 1.2836  1.156  1.122  0.855  0.09
(b)  1.2837  1.2845  1.159
69-42475-6  1.2820 - 1.2830  1.2832  1.2832  1.2836  1.2836  1.156  1.122  0.935  0.09
(b)  1.2837  1.2845  1.159
69-42475-9  1.2820 - 1.2830  1.3457  1.3457  1.3461  1.3461  1.218  1.192  0.905  0.09
(c)  1.3462  1.3470  1.221
APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES
(SHEET 3 OF 4)
Original Issue: June 27, 1975
Revision 6 February 07, 2014  Export Controlled ECCN: 9E991 - BOEING  A3183
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  105 of 106

### Page 106

Outboard Strut - Drag Fitting - Flanged Bushing - Plated (a)
G
+0.010
-0.000
F
+/-
0.005
ED (After Plate)D (Before Plate)Drag Fitting
Hole Diameter
Part Number
0.090.9061.192
1.221
1.2181.3461
1.3470
1.34611.3457
1.3462
1.34571.2820 - 1.283069-42475-10
(c)
0.090.8351.192
1.221
1.2181.3461
1.3470
1.34611.3457
1.3462
1.34571.2820 - 1.283069-42475-15
(c)
0.060.8551.122
1.159
1.1561.2836
1.2845
1.28361.2832
1.2837
1.28321.2820 - 1.283069-42475-18
(b)
(a) Cadmium plate in accordance with AMS-QQ-P-416, Type 1, Class 2. Plating optional on ID.
(b) This part is required with Top Kit 65C13839-1.
(c) This part is required with Top Kit 65C13873-1.
APPENDIX C: BUSHING DIMENSIONS FOR DRAG FITTING ATTACHMENT HOLES
(SHEET 4 OF 4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: June 27, 1975
A3183Revision 6 February 07, 2014
106 of 106
BOEING SERVICE BULLETIN A3183
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
