# Boeing Service Bulletin A3515: Revision 1, from page 37

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-2965; AD 2016-08-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin A3515](https://openairdocs.org/service-documents/boeing/a3515.md)
- Title as filed: U.S. DOT/FAA - SB-707-00A3515-01
- Pages: 38
- PDF: https://openairdocs.org/files/sha256/f2/0f/f20f1e032e60c099739eadb957115fe8a572a4df94ccd71daa5cfdfb3c1dd0c5
- Page: https://openairdocs.org/service-documents/boeing/a3515/file/f20f1e032e60

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 37

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)2-Forward Skin FlangeInspect1
(a) Do a Low Frequency Eddy Current (LFEC) inspection of the left and right side horizontal stabilizer rear
spar lower inboard chord forward skin flange between stabilizer station -13.179 and 92.55 for any cracking
in accordance with 707, 720 NDT, Part 6, 55-10-07, Figure 8.
(b) Exclude inspection of areas not accessible due to interference with any vortex generators mounted on the
lower surface. However, if any cracks are found at any of the first six (6) inspectable fasteners on either side
of the vortex generator, remove the vortex generator and inspect all fastener locations.
FIGURE 6: HORIZONTAL STABILIZER - REAR SPAR - LOWER INBOARD CHORD - FORWARD SKIN
FLANGE - STABILIZER STATION -13.179 TO STABILIZER STATION 92.55 - INSPECTION
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 19, 2007
A3515Revision 1 October 10, 2014
37 of 38
BOEING SERVICE BULLETIN A3515
ALERTALERT

### Page 38

FLIGHT CYCLES:FLIGHT HOURS:AIRPLANE REGISTRY:
LEFT SIDE Horizontal Stabilizer
Stabilizer Serial Number (a):Stabilizer Part Number (a):
Spar Chord Material (b): (from Part 2 - Configuration
Check)
LocationSpar Chord Seg-
ment
Side of Body to SSTA 182.55Upper Inboard
Side of Body to SSTA 182.55Lower Inboard
SSTA 182.55 to Stabilizer TipUpper Outboard
SSTA 182.55 to Stabilizer TipLower Outboard
RIGHT SIDE Horizontal Stabilizer
Stabilizer Serial Number (a):Stabilizer Part Number (a):
Spar Chord Material (b) (from Part 2 - Configuration
Check)
LocationSpar Chord Seg-
ment
Side of Body to SSTA 182.55Upper Inboard
Side of Body to SSTA 182.55Lower Inboard
SSTA 182.55 to Stabilizer TipUpper Outboard
SSTA 182.55 to Stabilizer TipLower Outboard
Record the horizontal stabilizer part number and serial number as recorded on the data
plate.
(a)
Record spar chord material, 7079-T6 or 7075-T73511, as determined from maintenance
record review, or electrical conductivity test. Do the electrical conductivity test in accordance
with 707 Non-Destructive Testing (NDT) Manual D6-48023 Part 6, 51-00-00, Figure 20,
dated April 5, 2004, and Boeing Process Specification BAC5946, Table I, Page 12, Revision
(AA) dated July 9, 2001.
(b)
Comments:
.
.
.
.
.
.
Appendix A: CONFIGURATION VERIFICATION - INSPECTION RESULTS FORM - MATERIAL DATA
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 19, 2007
A3515Revision 1 October 10, 2014
38 of 38
BOEING SERVICE BULLETIN A3515
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
