# Boeing Service Bulletin B787-81205-SB210055-00

Copy: Revision 001 ("U.S. DOT/FAA - SB B787-81205-SB210055-00 Issue 001"), 36 pages: PDF https://openairdocs.org/files/sha256/88/4d/884dd13cfa9626dff764ffc82ed318f9d9caceb8c21ca331f878c27993e85b98; text https://openairdocs.org/service-documents/boeing/b787-81205-sb210055-00/file/884dd13cfa96.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-7531; AD 2016-25-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB210055-00
- Latest revision known: B787-81205-SB210055-00, Issue 001, dated March 12, 2015 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb210055-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-25-21](https://openairdocs.org/ad/2016-25-21.md), effective Jan 26, 2017: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb210055-00/proposed.md).

## Text (36 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2015-7531; AD 2016-25-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Service Bulletin B787-81205-SB210055-00 AIR CONDITIONING - Air
Conditioning Cooling - Pack Flow Control System - Cabin Air Compressor,
Change
Issue 001, 12 Mar 2015B787-81205-SB210055-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2015 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 Airplanes. Refer to Data Module SB B787-A-21-00-0055-00A-932A-D, Paragraph 1., Effectivity for the
list of affected airplanes.
B787-81205-SB210055-00TITLE PAGE
Issue 001, 12 Mar 2015
Page 1 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 2

Alert Service Bulletin B787-81205-SB210055-00
Table of Contents
Page
Summary  .....................................................5
PLANNING INFORMATION  ..........................................1 1
1. Effectivity  .............................................1 1
A. Airplanes  ...........................................1 1
B. Spares Affected  ........................................1 3
2. Concurrent Requirements  ....................................1 3
3. Reason  ..............................................1 4
4. Description  ............................................1 4
5. Compliance  ...........................................1 5
6. Approval  .............................................1 5
7. Manpower  ............................................1 6
8. Weight and Balance Changes  .................................1 8
9. Electrical Load Data  .......................................1 8
10. References  ...........................................1 8
A. Existing Data:  .........................................1 8
B. Data Supplied with this Service Bulletin:  ..........................1 9
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  ...1 9
11. Publications Affected  ......................................1 9
12. Interchangeability and Intermixability of Parts  .........................1 9
13. Software Accomplishment Summary  ..............................1 9
MATERIAL INFORMATION  ..........................................2 0
1. Material - Price and Availability  .................................2 0
2. Industry Support Information  ..................................2 0
3. Parts Necessary for Each Airplane  ...............................2 0
A. Kits/Parts:  ...........................................2 0
B. Parts and Materials Supplied by the Operator:  .......................2 1
C. Parts Modified and Reidentified:  ...............................2 1
D. Parts Removed and Not Replaced:  .............................2 1
4. Parts Necessary to Change Spares  ..............................2 1
5. Special Tooling - Price and Availability  .............................2 2
6. Special Tooling Necessary to do this Service Bulletin  .....................2 2
ACCOMPLISHMENT INSTRUCTIONS  ...................................2 3
1. GENERAL INFORMATION  ...................................2 3
2. WORK INSTRUCTIONS  ....................................2 5
B787-81205-SB210055-00TABLE OF CONTENTS
Issue 001, 12 Mar 2015
Page 2 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 3

Alert Service Bulletin B787-81205-SB210055-00
List of Illustrations
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-21-00-0055-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Description
Group 1-2:
Table 1  List of Illustrations - Alert Service Bulletin B787-81205-SB210055-00
Used InICN
B787-A-21-00-0055-00A-931C-D Issue 002ICN-B787-A-000061-A-81205-08629-A-01-1
B787-A-21-00-0055-00A-931C-D Issue 002ICN-B787-A-000061-A-81205-08630-A-01-1
B787-A-21-00-0055-00A-00AA-DApplicable To:
Issue 002, 12 Mar 2015End of data moduleModel 787
See Applicability of this data module
Page 3 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 4

Alert Service Bulletin B787-81205-SB210055-00
List of Effective Data Modules
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-21-00-0055-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Description
Group 1-2:
Table 1  List of Effective Data Modules - Alert Service Bulletin B787-81205-SB210055-00
Issue DateIssue StatusIssueData Module – Information Name
2015-03-12Changed002B787-A-21-00-0055-00A-00AA-D – List of Illustrations
2015-03-12Changed002B787-A-21-00-0055-00A-00SA-D – List of Effective Data Modules
2015-03-12Changed002B787-A-21-00-0055-00A-931C-D – Summary
2015-03-12Changed002B787-A-21-00-0055-00A-932A-D – PLANNING INFORMATION
2015-03-12Changed002B787-A-21-00-0055-00A-934A-D – MATERIAL INFORMATION
2015-03-12Changed002B787-A-21-00-0055-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
B787-A-21-00-0055-00A-00SA-DApplicable To:
Issue 002, 12 Mar 2015End of data moduleModel 787
See Applicability of this data module
Page 4 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 5

Alert Service Bulletin B787-81205-SB210055-00
Summary
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-21-00-0055-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Concurrent RequirementsSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 2.
Spares AffectedSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 1.B.
ComplianceSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 5.
Weight and Balance ChangesSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 8.
Electrical Load DataSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 9.
Publications AffectedSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 11.
Kits/PartsSB B787-A-21-00-0055-00A-934A-D Issue 002,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-21-00-0055-00A-934A-D Issue 002,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-21-00-0055-00A-934A-D Issue 002,
Paragraph 6.
EffectivitySB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 1.
ManpowerSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 7.
Material - Price and AvailabilitySB B787-A-21-00-0055-00A-934A-D Issue 002,
Paragraph 1.
B787-A-21-00-0055-00A-931C-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 5 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 6

Description
Group 1-2:
1. CONCURRENT REQUIREMENTS
Refer to Data Module SB B787-A-21-00-0055-00A-932A-D, Paragraph 2., Concurrent Requirements.
2. BACKGROUND
This service bulletin gives instructions to replace the inboard and outboard Cabin Air Compressor (CAC)
modules on the left side and right side Cabin Air Conditioning and Temperature Control System (CACTCS)
packs. The current CAC module has experienced six in-service events in which electrical shorts of the motor
stator wiring burned a hole through the CAC motor stator housing. The pack bay is classified as a flammable
fluid leakage zone and the burn-through would be classified as an ignition source. The new CAC motor
housing thickness is increased to contain the arc. In addition, the CACTCS pack has reinforcements made
to support the increased weight of the new CAC. Also, a change is made to the right side CACTCS pack
CAC motor cooling ducts to help mitigate water ingress into the motor. If the service bulletin is not incorpo-
rated, the CAC may experience an electrical motor short and burn a hole in the CAC motor housing, which
could result in a fire in the pack bay.
Boeing Service Related Problem (SRP) 787 SRP-21-0208 is related to this service bulletin.
Fleet Team Digest (FTD) 787-FTD-21-13011 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-21-00-0055-00A-932A-
D, Paragraph 1.B., Spares Affected
YesSpares Affected
Data Module SB B787-A-21-00-0055-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
Data Module SB B787-A-21-00-0055-00A-932A-
D, Paragraph 8., Weight and Balance Changes
YesWeight and Balance Changed
Data Module SB B787-A-21-00-0055-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-21-00-0055-00A-932A-
D, Paragraph 11., Publications Affected
YesPublications Affected
Data Module SB B787-A-21-00-0055-00A-932A-
D, Paragraph 11., Publications Affected
NoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Data Module SB B787-A-21-00-0055-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
B787-A-21-00-0055-00A-931C-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 6 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 7

Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-21-00-0055-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-21-00-0055-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
As part of a service bulletin validation program, this change was completed on airplanes ZA294-ZA295,
ZA536 and ZA539-ZA541 by Service Bulletin B787-81205-VB210055-00 Issue 001, dated October 17, 2014,
before Issue 001 of this service bulletin. The changed completed on airplanes ZA294-ZA295, ZA536 and
ZA539-ZA541 by Service Bulletin B787-81205-VB210055-00 Issue 001, dated October 17, 2014, is equiv-
alent to Issue 001 of this service bulletin. Airplanes ZA294-ZA295, ZA536 and ZA539-ZA541 have the
configuration of a Group 1 airplane.
3. ACTION
(CN-AA48354D)
Group 1:
Work Package 1: Get access to and remove the inboard and outboard CAC Modules on the left side Non
Forward Cargo Air Conditioning (NONFCAC) CACTCS pack. Remove the existing CAC from the inboard
and outboard CAC modules and prepare to install the new CAC to the inboard and outboard CAC modules.
Modify the inboard and outboard CAC Modules and the CACTCS Pack. Refer to UTC Aerospace Systems,
Hamilton Sundstrand service bulletin 7010188-21-6. Install the changed inboard and outboard CAC Modules.
Do installation test and reidentify the CACTCS Pack.
Group 1:
Work Package 2: Get access to and remove the inboard and outboard CAC Modules on the right side
NONFCAC CACTCS pack. Remove the existing CAC from the inboard and outboard CAC modules and
prepare to install the new CAC to the inboard and outboard CAC modules. Modify the inboard and outboard
CAC Modules and the CACTCS Pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service
bulletin 7010189-21-6. Install the changed inboard and outboard CAC Modules. Do installation test and
reidentify the CACTCS Pack.
Group 2:
Work Package 3: Get access to and remove the inboard and outboard CAC Modules on the left side Forward
Cargo Air Conditioning (FCAC) CACTCS pack. Remove the existing CAC from the inboard and outboard
CAC modules and prepare to install the new CAC to the inboard and outboard CAC modules. Modify the
inboard and outboard CAC Modules and the CACTCS Pack. Refer to UTC Aerospace Systems, Hamilton
Sundstrand service bulletin 7010097-21-6. Install the changed inboard and outboard CAC Modules. Do
installation test and reidentify the CACTCS Pack.
Group 2:
Work Package 4: Get access to and remove the inboard and outboard CAC Modules on the right side FCAC
CACTCS pack. Remove the existing CAC from the inboard and outboard CAC modules and prepare to
install the new CAC to the inboard and outboard CAC modules. Modify the inboard and outboard CAC
Modules and the CACTCS Pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
B787-A-21-00-0055-00A-931C-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 7 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 8

7010098-21-6. Install the changed inboard and outboard CAC Modules. Do installation test and reidentify
the CACTCS Pack.
Group 1-2:
4. EFFECTIVITY
787-8 Airplanes. Refer to Data Module SB B787-A-21-00-0055-00A-932A-D, Paragraph 1., Effectivity for
the list of affected airplanes.
5. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within five years after the Issue
001 date of this service bulletin.
6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
7. MANPOWER
Refer to Data Module SB B787-A-21-00-0055-00A-932A-D, Paragraph 7., Manpower.
8. MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Data Module SB B787-A-21-00-0055-00A-934A-D, Paragraph 1., Material - Price and Availability.
B787-A-21-00-0055-00A-931C-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 8 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 9 (OCR)

@ BOEING  B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN
LEFT ENVIRONMENTAL
CONTROL SYSTEM (ECS)
RIGHT ENVIRONMENTAL
CONTROL SYSTEM (ECS)
-REMOVE LEFT OUTBOARD
CABIN AIR COMPRESSOR
(CAC) MODULE AND INSTALL
CHANGED CAC MODULE
-DO INSTALLATION TEST
-REMOVE LEFT INBOARD
CABIN AIR COMPRESSOR
(CAC) MODULE AND INSTALL
CHANGED CAC MODULE
-DO INSTALLATION TEST
LEFT ENVIRONMENTAL
CONTROL SYSTEM (ECS)
ICN-B787-A-000061-A-81205-08629-A-01-1
Figure 1
Applicable To:  B787-A-21-00-0055-00A-931C-D
Model 787  Issue 002, 12 Mar 2015
See Applicability of this data module
Page 9 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 10 (OCR)

@BOEING  B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN
-REMOVE RIGHT OUTBOARD
CABIN AIR COMPRESSOR
(CAC) MODULE AND INSTALL
CHANGED CAC MODULE
-DO INSTALLATION TEST
-REMOVE RIGHT INBOARD
CABIN AIR COMPRESSOR
RIGHT ENVIRONMENTAL CONTROL SYSTEM (ECS)  (CAC) MODULE AND INSTALL
CHANGED CAC MODULE
-DO INSTALLATION TEST
ICN-B787-A-000061-A-81205-08630-A-01-1
Figure 2
Applicable To:  B787-A-21-00-0055-00A-931C-D
Model 787  End of data module  Issue 002, 12 Mar 2015
See Applicability of this data module
Page 10 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 11

Alert Service Bulletin B787-81205-SB210055-00
PLANNING INFORMATION
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN PARAGRAPH 1., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED
Alert:
OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES
HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
References
TitleReference
BOLT AND NUT INSTALLATIONSOPM 20-50-01
Standard Wiring Practices ManualSWPM 20-10-11
Standard Wiring Practices ManualSWPM 20-10-12
Standard Wiring Practices ManualSWPM 20-10-19
CABIN AIR COMPRESSOR787 AMM 21-51-19
Description
Group 1-2:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 Airplanes, line numbers 6-9, 11, 20-21, 23-125, 127-132,
134-138, 140-145, 147-168, 170-180, 182-201, 203-212, 214-217, 219-222, 224-228, 230-233, 235,
237-239, 241-245, 247-252, 254-255, 257-258 and 260-261 in two Groups. The Variable Numbers
and Group information for the applicable airplanes is given below. An equivalent change is on subse-
quent production airplanes. Refer to CN-AA48354 for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 airplanes without Forward Cargo Air Conditioning (NONFCAC)-1
787-8 airplanes with Forward Cargo Air Conditioning (FCAC)-2
Airplane Models: 787-8
Table 2  
GroupVariable Number
2ZA006
2ZA100-ZA105
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 11 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 12

Table 2  
GroupVariable Number
2ZA116-ZA124
2ZA135-ZA140
2ZA152
1ZA175-ZA189
1ZA195-ZA198
2ZA215-ZA222
1ZA230-ZA248
2ZA260-ZA275
1ZA285-ZA296
2ZA317-ZA323
2ZA327
2ZA334-ZA335
1ZA380-ZA389
1ZA430-ZA437
1ZA445-ZA448
2ZA450-ZA457
2ZA460-ZA478
2ZA506-ZA516
1ZA536-ZA544
2ZA560
1ZA561-ZA565
2ZA566-ZA567
2ZA576-ZA580
2ZA586
1ZA588-ZA591
1ZA610-ZA616
2ZA650-ZA651
2ZA655-ZA660
2ZA665-ZA668
1ZA680-ZA681
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 12 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 13

Table 2  
GroupVariable Number
2ZA695
2ZA715-ZA716
1ZA740-ZA741
2ZA778-ZA779
1ZA783
1ZA817-ZA819
2ZA841
1ZA846
B. Spares Affected
Group 1:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010188-21-6 and 7010189-
21-6.
Group 2:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010097-21-6 and 7010098-
21-6.
Group 1-2:
2. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin.
Group 1:
Table 3  
DescriptionService BulletinCompany
AIR CONDITIONING - 787 CACTCS PACK
(LEFT HAND, NONFCAC) - UPGRADE TO
7010188H08 (For Work Package 1)
7010188-21-6, Revision 1. Dated: January
30, 2015.
UTC Aerospace
Systems, (Hamilton
Sundstrand)
AIR CONDITIONING - 787 CACTCS PACK
(RIGHT HAND, NONFCAC) - UPGRADE
TO 7010189H08 (For Work Package 2)
7010189-21-6, Revision 1. Dated: January
30, 2015.
UTC Aerospace
Systems, (Hamilton
Sundstrand)
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 13 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 14

Group 2:
Table 4  
DescriptionService BulletinCompany
AIR CONDITIONING - 787 CACTCS PACK
(LEFT HAND, FCAC) - UPGRADE TO
7010097H08 (For Work Package 3)
7010097-21-6, Revision 1. Dated: January
30, 2015.
UTC Aerospace
Systems, (Hamilton
Sundstrand)
AIR CONDITIONING - 787 CACTCS PACK
(RIGHT HAND, FCAC) - UPGRADE TO
7010098H08 (For Work Package 4)
7010098-21-6, Revision 1. Dated: January
30, 2015.
UTC Aerospace
Systems, (Hamilton
Sundstrand)
Group 1-2:
3. Reason
This service bulletin gives instructions to replace the inboard and outboard Cabin Air Compressor (CAC)
modules on the left side and right side Cabin Air Conditioning and Temperature Control System (CACTCS)
packs. The current CAC module has experienced six in-service events in which electrical shorts of the
motor stator wiring burned a hole through the CAC motor stator housing. The pack bay is classified as a
flammable fluid leakage zone and the burn-through would be classified as an ignition source. The new
CAC motor housing thickness is increased to contain the arc. In addition, the CACTCS pack has reinforce-
ments made to support the increased weight of the new CAC. Also, a change is made to the right side
CACTCS pack CAC motor cooling ducts to help mitigate water ingress into the motor. If the service bulletin
is not incorporated, the CAC may experience an electrical motor short and burn a hole in the CAC motor
housing, which could result in a fire in the pack bay.
Boeing Service Related Problem (SRP) 787 SRP-21-0208 is related to this service bulletin.
Fleet Team Digest (FTD) 787-FTD-21-13011 is related to this service bulletin.
As part of a service bulletin validation program, this change was completed on airplanes ZA294-ZA295,
ZA536 and ZA539-ZA541 by Service Bulletin B787-81205-VB210055-00 Issue 001, dated October 17,
2014, before Issue 001 of this service bulletin. The changed completed on airplanes ZA294-ZA295, ZA536
and ZA539-ZA541 by Service Bulletin B787-81205-VB210055-00 Issue 001, dated October 17, 2014, is
equivalent to Issue 001 of this service bulletin. Airplanes ZA294-ZA295, ZA536 and ZA539-ZA541 have
the configuration of a Group 1 airplane.
4. Description
Group 1:
Work Package 1: Get access to and remove the inboard and outboard CAC Modules on the left side Non
Forward Cargo Air Conditioning (NONFCAC) CACTCS pack. Remove the existing CAC from the inboard
and outboard CAC modules and prepare to install the new CAC to the inboard and outboard CAC modules.
Modify the inboard and outboard CAC Modules and the CACTCS Pack. Refer to UTC Aerospace Systems,
Hamilton Sundstrand service bulletin 7010188-21-6. Install the changed inboard and outboard CAC Modules.
Do installation test and reidentify the CACTCS Pack
Group 1:
Work Package 2: Get access to and remove the inboard and outboard CAC Modules on the right side
NONFCAC CACTCS pack. Remove the existing CAC from the inboard and outboard CAC modules and
prepare to install the new CAC to the inboard and outboard CAC modules. Modify the inboard and outboard
CAC Modules and the CACTCS Pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 14 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 15

bulletin 7010189-21-6. Install the changed inboard and outboard CAC Modules. Do installation test and
reidentify the CACTCS Pack.
Group 2:
Work Package 3: Get access to and remove the inboard and outboard CAC Modules on the left side Forward
Cargo Air Conditioning (FCAC) CACTCS pack. Remove the existing CAC from the inboard and outboard
CAC modules and prepare to install the new CAC to the inboard and outboard CAC modules. Modify the
inboard and outboard CAC Modules and the CACTCS Pack. Refer to UTC Aerospace Systems, Hamilton
Sundstrand service bulletin 7010097-21-6. Install the changed inboard and outboard CAC Modules. Do
installation test and reidentify the CACTCS Pack.
Group 2:
Work Package 4: Get access to and remove the inboard and outboard CAC Modules on the right side
FCAC CACTCS pack. Remove the existing CAC from the inboard and outboard CAC modules and prepare
to install the new CAC to the inboard and outboard CAC modules. Modify the inboard and outboard CAC
Modules and the CACTCS Pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010098-21-6. Install the changed inboard and outboard CAC Modules. Do installation test and reidentify
the CACTCS Pack.
Group 1-2:
The work in this service bulletin is done in the maintenance zone(s) given below.
Table 5  
Affected Maintenance Zones
ZoneModel
135, 136787-8
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within five years after the Issue
001 date of this service bulletin.
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 15 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 16

7. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane. This
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour
data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
Group 1:
NOTE: The time to make the change also includes the work required in UTC Aerospace Systems,
Hamilton Sundstrand Service Bulletins 7010188-21-6 and 7010189-21-6. 
Group 1:
Table 6  Work Package 1 - Left Non Forward Cargo Air Conditioning (NONFCAC) 
CACTCS Pack, Inboard and Outboard CAC Change
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.001.001Open Access
4.008.002Remove the In-
board and Out-
board CAC Module
3.006.002Modify the Inboard
and Outboard CAC
and the Pack
4.008.002Install the Inboard
and Outboard CAC
Module
1.251.251Installation Test
1.001.001Close Access
14.2525.25TOTAL FOR WORK PACKAGE 1
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 16 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 17

Group 1:
Table 7  Work Package 2 - Right Non Forward Cargo Air Conditioning (NONFCAC)
 CACTCS Pack, Inboard and Outboard CAC Change
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.001.001Open Access
4.008.002Remove the In-
board and Out-
board CAC Module
4.008.002Modify the Inboard
and Outboard CAC
and the Pack
4.509.002Install the Inboard
and Outboard CAC
Module
1.251.251Installation Test
1.001.001Close Access
15.7528.25TOTAL FOR WORK PACKAGE 2
Group 2:
NOTE: The time to make the change also includes the work required in UTC Aerospace Systems,
Hamilton Sundstrand Service Bulletins 7010097-21-6 and 7010098-21-6. 
Group 2:
Table 8  Work Package 3 - Left Forward Cargo Air Conditioning (FCAC) CACTCS 
Pack, Inboard and Outboard CAC Change
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.001.001Open Access
4.008.002Remove the In-
board and Out-
board CAC Module
3.006.002Modify the Inboard
and Outboard CAC
and the Pack
4.008.002Install the Inboard
and Outboard CAC
Module
1.251.251Installation Test
1.001.001Close Access
14.2525.25TOTAL FOR WORK PACKAGE 3
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 17 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 18

Group 2:
Table 9  Work Package 4 - Right Forward Cargo Air Conditioning (FCAC) CACTCS
 Pack, Inboard and Outboard CAC Change
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.001.001Open Access
4.008.002Remove the In-
board and Out-
board CAC Module
4.008.002Modify the Inboard
and Outboard CAC
and the Pack
4.509.002Install the Inboard
and Outboard CAC
Module
1.251.251Installation Test
1.001.001Close Access
15.7528.25TOTAL FOR WORK PACKAGE 4
Group 1-2:
8. Weight and Balance Changes
Table 10  
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)
Airplane
+ 27,160 lb-inches+ 28 lbs787-8
NOTE: The Weight and Balance change above includes incorporation of both applicable work packages. 
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA48354C, CN-AA48354D
2. Aircraft Maintenance Manual (AMM) 787 AMM 21-51-19,
3. Boeing Service Related Problem (SRP) 787 SRP-21-0208
Group 1:
4. UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7010188-21-6 and 7010189-21-
6
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 18 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 19

Group 2:
5. UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7010097-21-6 and 7010098-21-
6
Group 1-2:
6. Standard Overhaul Practices Manual (SOPM) SOPM 20-50-01
7. Standard Wiring Practices Manual (SWPM) SWPM 20-10-11, SWPM 20-10-12, SWPM 20-10-19
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 11  
Chapter-SectionPublication
21-51787 Maintenance Manual
ZA1-35, ZA1-36787 Illustrated Parts Data
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Group 1:
After this service bulletin is incorporated the CACTCS Packs cannot go back to the previous configuration.
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7010188-21-6 and 7010189-21-
6 for additional information.
Group 2:
After this service bulletin is incorporated the CACTCS Packs cannot go back to the previous configuration.
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7010097-21-6 and 7010098-21-
6 for additional information.
Group 1-2:
13. Software Accomplishment Summary
Not Affected.
B787-A-21-00-0055-00A-932A-DApplicable To:
Issue 002, 12 Mar 2015End of data moduleModel 787
See Applicability of this data module
Page 19 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 20

Alert Service Bulletin B787-81205-SB210055-00
MATERIAL INFORMATION
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-21-00-0055-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Work InstructionsSB B787-A-21-00-0055-00A-933A-D Issue 002, Step 2.
ReferencesSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 10.
Description
Group 1-2:
1. Material - Price and Availability
Group 1:
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane,
and Paragraph 4., Parts Necessary to Change Spares. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletins 7010188-21-6 and 7010189-21-6.
Group 2:
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane,
and Paragraph 4., Parts Necessary to Change Spares. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletins 7010097-21-6 and 7010098-21-6.
Group 1-2:
2. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B787-A-21-00-0055-00A-934A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 20 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 21

B. Parts and Materials Supplied by the Operator:
Table 1  
NotesNameQTYPart Number /
Specification
*[1] *[2]ANTI-SEIZE COMPOUND, GENER-
AL PURPOSE
4 Oz.BMS3-28
*[1] *[3]FUEL TANK SEALANT4 Oz.BMS5-45
*[1]  See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
*[2]  BMS3-28 can be used as an accepted substitute for Mo-Lith #2 as referred to in the UTAS service bulletins.
*[3]  BMS5-45 can be used as an accepted substitute for AMS-S-8802, Type 2, Class C-8(20) sealant as referred to in the
UTAS service bulletins.
Group 1:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010188-21-6 and 7010189-
21-6.
Group 2:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010097-21-6 and 7010098-
21-6.
Group 1-2:
C. Parts Modified and Reidentified:
Group 1:
Reidentify the left and right Non Forward Cargo Air Conditioning (NONFCAC) Cabin Air Conditioning
and Temperature Control System (CACTCS) Pack as shown in Data Module SB B787-A-21-00-0055-
00A-933A-D, Step 2., Work Instructions, Work Package 1 and Work Package 2, Step (14).
Group 2:
Reidentify the left and right Forward Cargo Air Conditioning (FCAC) Cabin Air Conditioning and Tem-
perature Control System (CACTCS) Pack as shown in Data Module SB B787-A-21-00-0055-00A-933A-
D, Step 2., Work Instructions, Work Package 3 and Work Package 4, Step (14).
Group 1-2:
D. Parts Removed and Not Replaced:
Group 1:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010188-21-6 and 7010189-
21-6.
Group 2:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010097-21-6 and 7010098-
21-6.
Group 1-2:
4. Parts Necessary to Change Spares
B787-A-21-00-0055-00A-934A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 21 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 22

Group 1:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010188-21-6 and 7010189-21-
6.
Group 2:
Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletins 7010097-21-6 and 7010098-21-
6.
Group 1-2:
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-21-00-0055-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-21-00-0055-00A-934A-DApplicable To:
Issue 002, 12 Mar 2015End of data moduleModel 787
See Applicability of this data module
Page 22 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 23

Alert Service Bulletin B787-81205-SB210055-00
ACCOMPLISHMENT INSTRUCTIONS
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-21-00-0055-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 10.
ManpowerSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 7.
ComplianceSB B787-A-21-00-0055-00A-932A-D Issue 002,
Paragraph 5.
Standard Wiring Practices ManualSWPM 20-10-11
Standard Wiring Practices ManualSWPM 20-10-12
Standard Wiring Practices ManualSWPM 20-10-19
BOLT AND NUT INSTALLATIONSOPM 20-50-01
APPLICATION OF STENCILS, INSIGNIA, SILK
SCREEN, PART NUMBERING AND
IDENTIFICATION MARKINGS
SOPM 20-50-10
CABIN AIR COMPRESSOR787 AMM 21-51-19
Procedure
Group 1-2:
1. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTI-
CLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, METAL
PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE
TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER
ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-21-00-0055-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 23 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 24

2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours for each
package are given in Data Module SB B787-A-21-00-0055-00A-932A-D, Paragraph 7., Manpower.
You can do each work package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
5. Use the approved fastener, process and material substitutions in accordance with SRM Chapter
51.
6. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures, and
SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
7. The necessary conditions for selection of clamp type and size are included in SWPM 20-10-12.
If any wire bundle support clamp specified in this service bulletin does not make a correct fit on
the wire bundle, refer to SWPM 20-10-12 as an accepted procedure to select a clamp that fits
correctly.
8. If the length of any fastener specified in this service bulletin does not meet the installation
standards in SRM Chapter 51, then a fastener of the same specification, or an approved substi-
tute, with a length which meets the installation standards in SRM Chapter 51 may be used. In
addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51.
Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation
in this service bulletin.
9. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
10. The instructions in Step 2., Work Instructions and the Tasks can include operation of tools or
test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual,
and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 24 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 25

or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to
use superseded tools.
11. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable part with
the same part number can be installed as an alternative to the kept part.
13. This service bulletin includes functional test procedures for the systems changed by this service
bulletin. More functional tests can possibly be necessary in accordance with standard mainte-
nance practices because of interruption to other airplane systems.
14. The compliance times for the actions in Step 2., Work Instructions are in Data Module SB B787-
A-21-00-0055-00A-932A-D, Paragraph 5., Compliance.
15. Some steps in the Work Instructions are identified as Required for Compliance (RC). If this
service bulletin is mandated by an Airworthiness Directive (AD), then the steps identified as RC
must be done to comply with the AD. Alternative procedures for steps not identified with RC can
be used if the RC steps can still be done as specified, and the airplane can be put back in a
serviceable condition. An Alternative Method of Compliance (AMOC) is not necessary for devi-
ations to steps that are not identified as RC.
2. WORK INSTRUCTIONS
Group 1:
A. WORK PACKAGE 1 : LEFT NON FORWARD CARGO AIR CONDITIONING (NONFCAC) CABIN AIR
CONDITIONING AND TEMPERATURE CONTROL SYSTEM (CACTCS) PACK, INBOARD AND
OUTBOARD CABIN AIR COMPRESSOR (CAC) - CHANGE
NOTE: Both the inboard and the outboard CAC Module on the left Cabin Air Conditioning and Temper-
ature Control System (CACTCS) pack must be replaced at the same time. 
NOTE: The order in which the following instructions are accomplished may be switched to simplify the
CAC change, if necessary. 
NOTE: The inlet sensor bracket is also referred to as the Left Hand (LH) Remote Sensor Bracket in
the UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010188-21-6. 
NOTE: The electrical surface bond and fay seal data is provided in the applicable 787 AMM 21-51-19
Cabin Air Compressor - Preparation before Installation AMMs. 
(1) RC - Get access to and remove the outboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the left CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Left Outboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 25 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 26

(2) RC - Get access to and remove the inboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the left CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Left Inboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(3) Remove the CAC from the outboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Left Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010188-21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Left Outboard
- Removal" for the top bracket, electrical harness, strap, inlet sensor and inlet sensor
bracket removal procedure. 
(4) Remove the CAC from the inboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Left Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010188-21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Left Inboard
- Removal" for top bracket, electrical harness, strap, inlet sensor and inlet sensor bracket
removal procedure. 
(5) Prepare the inboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Left Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010188-
21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101247-1, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Left Inboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(6) Prepare the outboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Left Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010188-
21-6. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 26 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 27

NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101246-5, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Left Outboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(7) Modify the inboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010188-21-6 as an approved procedure.
(8) Modify the outboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010188-21-6 as an approved procedure.
(9) Modify the left CACTCS Pack to support the installation of the modified inboard and outboard CAC
Modules. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010188-21-6
as an approved procedure.
(10) RC - Install the modified inboard CAC Module, with CAC assembly part number 7010101H09, onto
the left CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010188-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Left Inboard - Installation", as ac-
cepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
NOTE: As an option operators can install the inlet housing and flexible duct after the outboard
CAC has been installed. When the outboard CAC is being installed, it may prove difficult
to line the outboard CAC upper bracket to the 3-way mount bracket. Without the inlet
housing and flexible duct installed, it allows more space to install the fasteners required
to attach the outboard CAC upper bracket to the 3-way mount bracket.  
(11) RC - Install the modified outboard CAC Module, with CAC assembly part number 7010101H09,
onto the left CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010188-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Left Outboard - Installation", as
accepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
(12) RC - Do installation test of the inboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Left Inboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(13) RC - Do installation test of the outboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Left Outboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(14) Reidentify the CACTCS Pack. Do one of the following:
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 27 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 28

(a) For airplanes with existing left side CACTCS Pack part number 7010188H07, mark part number
7010188H08 below the CACTCS Pack identification plate. Also apply the Boeing service bulletin
number B787-81205-SB210055-00 and the UTC Aerospace Systems Hamilton Sundstrand
service bulletin number 7010188-21-6 below the CACTCS Pack identification plate. Refer to
SOPM 20-50-10 as an accepted procedure.
(b) For airplanes with existing left side CACTCS Pack part number 7010188H02 through
7010188H06, apply the Boeing service bulletin number B787-81205-SB210055-00 and the
UTC Aerospace Systems Hamilton Sundstrand service bulletin number 7010188-21-6 below
the CACTCS Pack identification plate. Refer to SOPM 20-50-10 as an accepted procedure.
(15) Close access and put the airplane back to a serviceable condition.
Group 1:
B. WORK PACKAGE 2 : RIGHT NON FORWARD CARGO AIR CONDITIONING (NONFCAC) CABIN
AIR CONDITIONING AND TEMPERATURE CONTROL SYSTEM (CACTCS) PACK, INBOARD AND
OUTBOARD CABIN AIR COMPRESSOR (CAC) - CHANGE
NOTE: Both the inboard and the outboard CAC Module on the right Cabin Air Conditioning and Tem-
perature Control System (CACTCS) pack must be replaced at the same time. 
NOTE: The order in which the following instructions are accomplished may be switched to simplify the
CAC change, if necessary. 
NOTE: The inlet sensor bracket is also referred to as the Right Hand (RH) CAC Pressure Sensor
Bracket in the UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010189-21-6. 
NOTE: The electrical surface bond and fay seal data is provided in the applicable 787 AMM 21-51-19
Cabin Air Compressor - Preparation before Installation AMMs. 
(1) RC - Get access to and remove the outboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the right CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Right Outboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(2) RC - Get access to and remove the inboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the right CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Right Inboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(3) Remove the CAC from the outboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Right Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010189-21-6. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 28 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 29

NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Right Outboard
- Removal" for the top bracket, electrical harness, strap, inlet sensor and inlet sensor
bracket removal procedure. 
(4) Remove the CAC from the inboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Right Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010189-21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Right Inboard
- Removal" for top bracket, electrical harness, strap, inlet sensor and inlet sensor bracket
removal procedure. 
(5) Prepare the inboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Right Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010189-
21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101247-2, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Right Inboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(6) Prepare the outboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Right Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010189-
21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101246-6, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Right Outboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(7) Modify the inboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010189-21-6 as an approved procedure.
(8) Modify the outboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010189-21-6 as an approved procedure.
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 29 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 30

(9) Modify the right CACTCS Pack to support the installation of the modified inboard and outboard
CAC Modules. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010189-
21-6 as an approved procedure.
(10) RC - Install the modified inboard CAC Module, with CAC assembly part number 7010101H09, onto
the right CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010189-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Right Inboard - Installation", as
accepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
(11) RC - Install the modified outboard CAC Module, with CAC assembly part number 7010101H09,
onto the right CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service
bulletin 7010189-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Right Outboard - Installation",
as accepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
(12) RC - Do installation test of the inboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Right Inboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(13) RC - Do installation test of the outboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Right Outboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(14) Reidentify the CACTCS Pack. Do one of the following:
(a) For airplanes with existing right side CACTCS Pack part number 7010189H07, mark part
number 7010189H08 below the CACTCS Pack identification plate. Also apply the Boeing
service bulletin number B787-81205-SB210055-00 and the UTC Aerospace Systems Hamilton
Sundstrand service bulletin number 7010189-21-6 below the CACTCS Pack identification
plate. Refer to SOPM 20-50-10 as an accepted procedure.
(b) For airplanes with existing right side CACTCS Pack part number 7010189H02 through
7010189H06, apply the Boeing service bulletin number B787-81205-SB210055-00 and the
UTC Aerospace Systems Hamilton Sundstrand service bulletin number 7010189-21-6 below
the CACTCS Pack identification plate. Refer to SOPM 20-50-10 as an accepted procedure.
(15) Close access and put the airplane back to a serviceable condition.
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 30 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 31

Group 2:
C. WORK PACKAGE 3 : LEFT FORWARD CARGO AIR CONDITIONING (FCAC) CABIN AIR
CONDITIONING AND TEMPERATURE CONTROL SYSTEM (CACTCS) PACK, INBOARD AND
OUTBOARD CABIN AIR COMPRESSOR (CAC) - CHANGE
NOTE: Both the inboard and the outboard CAC Module on the left Cabin Air Conditioning and Temper-
ature Control System (CACTCS) pack must be replaced at the same time. 
NOTE: The order in which the following instructions are accomplished may be switched to simplify the
CAC change, if necessary. 
NOTE: The inlet sensor bracket is also referred to as the Left Hand (LH) Remote Sensor Bracket in
the UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010097-21-6. 
NOTE: The electrical surface bond and fay seal data is provided in the applicable 787 AMM 21-51-19
Cabin Air Compressor - Preparation before Installation AMMs. 
(1) RC - Get access to and remove the outboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the left CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Left Outboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(2) RC - Get access to and remove the inboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the left CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Left Inboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(3) Remove the CAC from the outboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Left Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010097-21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Left Outboard
- Removal" for the top bracket, electrical harness, strap, inlet sensor and inlet sensor
bracket removal procedure. 
(4) Remove the CAC from the inboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Left Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010097-21-6. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 31 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 32

NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Left Inboard
- Removal" for top bracket, electrical harness, strap, inlet sensor and inlet sensor bracket
removal procedure. 
(5) Prepare the inboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Left Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010097-
21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101247-1, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Left Inboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(6) Prepare the outboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Left Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010097-
21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101246-5, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Left Outboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(7) Modify the inboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010097-21-6 as an approved procedure.
(8) Modify the outboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010097-21-6 as an approved procedure.
(9) Modify the left CACTCS Pack to support the installation of the modified inboard and outboard CAC
Modules. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010097-21-6
as an approved procedure.
(10) RC - Install the modified inboard CAC Module, with CAC assembly part number 7010101H09, onto
the left CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010097-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Left Inboard - Installation", as ac-
cepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 32 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 33

NOTE: As an option operators can install the inlet housing and flexible duct after the outboard
CAC has been installed. When the outboard CAC is being installed, it may prove difficult
to line the outboard CAC upper bracket to the 3-way mount bracket. Without the inlet
housing and flexible duct installed, it allows more space to install the fasteners required
to attach the outboard CAC upper bracket to the 3-way mount bracket. 
(11) RC - Install the modified outboard CAC Module, with CAC assembly part number 7010101H09,
onto the left CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010097-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Left Outboard - Installation", as
accepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
(12) RC - Do installation test of the inboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Left Inboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(13) RC - Do installation test of the outboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Left Outboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(14) Reidentify the CACTCS Pack. Do one of the following:
(a) For airplanes with existing left side CACTCS Pack part number 7010097H07, mark part number
7010097H08 below the CACTCS Pack identification plate. Also apply the Boeing service bulletin
number B787-81205-SB210055-00 and the UTC Aerospace Systems Hamilton Sundstrand
service bulletin number 7010097-21-6 below the CACTCS Pack identification plate. Refer to
SOPM 20-50-10 as an accepted procedure.
(b) For airplanes with existing left side CACTCS Pack part number 7010097H02 through
7010097H06, apply the Boeing service bulletin number B787-81205-SB210055-00 and the
UTC Aerospace Systems Hamilton Sundstrand service bulletin number 7010097-21-6 below
the CACTCS Pack identification plate. Refer to SOPM 20-50-10 as an accepted procedure.
(15) Close access and put the airplane back to a serviceable condition.
Group 2:
D. WORK PACKAGE 4 : RIGHT FORWARD CARGO AIR CONDITIONING (FCAC) CABIN AIR
CONDITIONING AND TEMPERATURE CONTROL SYSTEM (CACTCS) PACK, INBOARD AND
OUTBOARD CABIN AIR COMPRESSOR (CAC) - CHANGE
NOTE: Both the inboard and the outboard CAC Module on the right Cabin Air Conditioning and Tem-
perature Control System (CACTCS) pack must be replaced at the same time. 
NOTE: The order in which the following instructions are accomplished may be switched to simplify the
CAC change, if necessary. 
NOTE: The inlet sensor bracket is also referred to as the Right Hand (RH) CAC Pressure Sensor
Bracket in the UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010098-21-6. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 33 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 34

NOTE: The electrical surface bond and fay seal data is provided in the applicable 787 AMM 21-51-19
Cabin Air Compressor - Preparation before Installation AMMs. 
(1) RC - Get access to and remove the outboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the right CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Right Outboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(2) RC - Get access to and remove the inboard CAC Module, with CAC part number 7010101H07
through 7010101H08, from the right CACTCS pack. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Right Inboard - Removal", as an accepted procedure.
NOTE: As an option operators can leave the top bracket, electrical harness, strap, inlet sensor
and inlet sensor bracket attached to the CAC module during removal. This may simplify
the CAC module removal and the CAC module top bracket is replaced as part of this
change. This is done by removing the single CAC module top bracket pivot bolt rather
than the bolts that attach the top bracket to the CAC module. 
(3) Remove the CAC from the outboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Com-
pressor - Right Outboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010098-21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Right Outboard
- Removal" for the top bracket, electrical harness, strap, inlet sensor and inlet sensor
bracket removal procedure. 
(4) Remove the CAC from the inboard CAC module. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Right Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Remove and keep and discard parts. Refer to UTC Aerospace Systems, Hamilton Sund-
strand service bulletin 7010098-21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, remove
and keep these parts. Refer to 787 AMM 21-51-19 "Cabin Air Compressor - Right Inboard
- Removal" for top bracket, electrical harness, strap, inlet sensor and inlet sensor bracket
removal procedure. 
(5) Prepare the inboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Right Inboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010098-
21-6. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 34 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 35

NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101247-2, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Right Inboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(6) Prepare the outboard CAC module to be installed to the CAC. Refer to 787 AMM 21-51-19 "Cabin
Air Compressor - Right outboard - Preparation before Installation", as an accepted procedure.
NOTE: Discarded insulation blanket is replaced by CAC insulation and CAC motor housing insu-
lation. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010098-
21-6. 
NOTE: If the operator chose to keep the top bracket, electrical harness, strap, inlet sensor and
inlet sensor bracket attached to the CAC module during the CAC module removal, install
the new top bracket, part number 7101246-6, and the kept electrical harness, strap and
the inlet sensor and inlet sensor bracket after the port plug installation. Refer to 787 AMM
21-51-19 "Cabin Air Compressor - Right Outboard - Installation", for top bracket, electrical
harness, strap, inlet sensor and inlet sensor bracket installation procedure. 
(7) Modify the inboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010098-21-6 as an approved procedure.
(8) Modify the outboard CAC Module and install the new CAC part number 7010101H09. Refer to UTC
Aerospace Systems, Hamilton Sundstrand service bulletin 7010098-21-6 as an approved procedure.
(9) Modify the right CACTCS Pack to support the installation of the modified inboard and outboard
CAC Modules. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin 7010098-
21-6 as an approved procedure.
(10) RC - Install the modified inboard CAC Module, with CAC assembly part number 7010101H09, onto
the right CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service bulletin
7010098-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Right Inboard - Installation", as
accepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
(11) RC - Install the modified outboard CAC Module, with CAC assembly part number 7010101H09,
onto the right CACTCS pack. Refer to UTC Aerospace Systems, Hamilton Sundstrand service
bulletin 7010098-21-6 and 787 AMM 21-51-19 "Cabin Air Compressor - Right Outboard - Installation",
as accepted procedures.
NOTE: If using the ground support equipment referred to in the AMM, operators can avoid damage
to the new blanket as follows. When installing the collar assembly of the jack adapter, peel
back the insulation so that the insulation is not between the collar and the CAC. After the
CAC module is installed and the tool is removed, reposition and re-attach the blanket back
onto the CAC module. 
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015Model 787
See Applicability of this data module
Page 35 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

### Page 36

(12) RC - Do installation test of the inboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Right Inboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(13) RC - Do installation test of the outboard CAC. Refer to 787 AMM 21-51-19 "Cabin Air Compressor
- Right Outboard - Installation" as an accepted procedure. If steps in the installation test have not
passed, perform the corrective action and repeat the test until the test has passed.
(14) Reidentify the CACTCS Pack. Do one of the following:
(a) For airplanes with existing right side CACTCS Pack part number 7010098H07, mark part
number 7010098H08 below the CACTCS Pack identification plate. Also apply the Boeing
service bulletin number B787-81205-SB210055-00 and the UTC Aerospace Systems Hamilton
Sundstrand service bulletin number 7010098-21-6 below the CACTCS Pack identification
plate. Refer to SOPM 20-50-10 as an accepted procedure.
(b) For airplanes with existing right side CACTCS Pack part number 7010098H02 through
7010098H06, apply the Boeing service bulletin number B787-81205-SB210055-00 and the
UTC Aerospace Systems Hamilton Sundstrand service bulletin number 7010098-21-6 below
the CACTCS Pack identification plate. Refer to SOPM 20-50-10 as an accepted procedure.
(15) Close access and put the airplane back to a serviceable condition.
B787-A-21-00-0055-00A-933A-DApplicable To:
Issue 002, 12 Mar 2015End of data moduleModel 787
See Applicability of this data module
Page 36 of 36
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210055-00
Issue 001, 12 Mar 2015
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
