# Boeing Service Bulletin B787-81205-SB210075-00

Copy: Revision 003 ("SB B787-81205-SB210075-00 Issue 003"), 23 pages: PDF https://openairdocs.org/files/sha256/18/b9/18b9d447a59c50472f450cba5a5dd841a94c52842b941928e3f68579b9dd0575; text https://openairdocs.org/service-documents/boeing/b787-81205-sb210075-00/file/18b9d447a59c.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0904; AD 2018-12-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB210075-00
- Latest revision known: B787-81205-SB210075-00, Issue 003, dated March 29, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb210075-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-12-06](https://openairdocs.org/ad/2018-12-06.md), effective Jul 16, 2018: Revisions 001, 002 and 003

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb210075-00/proposed.md).

## Text (23 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0904; AD 2018-12-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin B787-81205-SB210075-00 AIR CONDITIONING - Pack Flow
Control System - Pack Control Unit, Software Change And Incorporation
Of New Housing And Tube (J-Tube)
Issue 003, 29 Mar 2017B787-81205-SB210075-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 Airplanes. Refer to Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 1., Effectivity for the
list of affected airplanes.
B787-81205-SB210075-00TITLE PAGE
Issue 003, 29 Mar 2017
Page 1 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 2

Service Bulletin B787-81205-SB210075-00
Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B. Spares Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. Existing Data:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Data Supplied with this Service Bulletin:  . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  . . . 16
11. Publications Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . 16
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Industry Support Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
A. Kits/Parts:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
B. Parts and Materials Supplied by the Operator:  . . . . . . . . . . . . . . . . . . . . . . . 18
C. Parts Modified and Reidentified:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
D. Parts Removed and Not Replaced:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. Special Tooling Necessary to do this Service Bulletin  . . . . . . . . . . . . . . . . . . . . . 19
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B787-81205-SB210075-00TABLE OF CONTENTS
Issue 003, 29 Mar 2017
Page 2 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 3

Service Bulletin B787-81205-SB210075-00
List of Effective Data Modules
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY.
Special Attention:
Description
Group 1:
Table 1  List of Effective Data Modules - Service Bulletin B787-81205-SB210075-00
Issue DateIssue StatusIssueData Module – Information Name
2017-03-29Changed004B787-A-21-00-0075-00A-00SA-D – List of Effective Data Modules
2017-03-29Changed002B787-A-21-00-0075-00A-931B-D – Revision Transmittal Information
2017-03-29Changed004B787-A-21-00-0075-00A-931C-D – Summary
2017-03-29Changed004B787-A-21-00-0075-00A-932A-D – PLANNING INFORMATION
2017-03-29Changed004B787-A-21-00-0075-00A-934A-D – MATERIAL INFORMATION
2017-03-29Changed004B787-A-21-00-0075-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
B787-A-21-00-0075-00A-00SA-DApplicable To:
Issue 004, 29 Mar 2017End of data moduleModel 787
See Applicability of this data module
Page 3 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 4

Service Bulletin B787-81205-SB210075-00
Revision Transmittal Information
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY.
Special Attention:
References
TitleReference
AirplanesSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 1.A.
Description
Group 1:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this revision on Airplanes on which Issue 001 or Issue 002 was previously done:
None
2. REASON FOR REVISION
This issue is sent to update the revision level for the Hamilton Sundstrand service bulletins. Information that
the FAA will possibly release an Airworthiness Directive (AD) associated with this service bulletin is also
added.
These sections were changed:
1. In Summary - Paragraph 5., Compliance, Added statement for a potential AD.
2. In Planning Information - Paragraph 2., Concurrent Requirements, Update supplier bulletin revision
levels.
3. In Planning Information, Paragraph 3., Reason, Added Revision Description.
4. In Planning Information, Paragraph 4., Description, Added this revision to the Effects statement.
5. In Planning Information, Paragraph 5., Compliance, Added statement for a potential AD.
Change marks are added, except in Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
B787-A-21-00-0075-00A-931B-DApplicable To:
Issue 002, 29 Mar 2017Model 787
See Applicability of this data module
Page 4 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 5

3. REVISION HISTORY
Table 1  
February 24, 2016Issue 1:
May 11, 2016Issue 2:
March 29, 2017Issue 3:
B787-A-21-00-0075-00A-931B-DApplicable To:
Issue 002, 29 Mar 2017End of data moduleModel 787
See Applicability of this data module
Page 5 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 6

Service Bulletin B787-81205-SB210075-00
Summary
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY.
Special Attention:
References
TitleReference
Concurrent RequirementsSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 2.
Spares AffectedSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 1.B.
ComplianceSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 5.
Weight and Balance ChangesSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 8.
Electrical Load DataSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 9.
Publications AffectedSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 11.
Kits/PartsSB B787-A-21-00-0075-00A-934A-D Issue 004,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-21-00-0075-00A-934A-D Issue 004,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-21-00-0075-00A-934A-D Issue 004,
Paragraph 6.
EffectivitySB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 1.
ManpowerSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 7.
Material - Price and AvailabilitySB B787-A-21-00-0075-00A-934A-D Issue 004,
Paragraph 1.
B787-A-21-00-0075-00A-931C-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 6 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 7

Description
Group 1:
1. CONCURRENT REQUIREMENTS
Refer to Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 2., Concurrent Requirements.
2. BACKGROUND
Accomplishment of this service bulletin will install new Pack Control Unit (PCU) software for the Cabin Air
Conditioning and Temperature Control System (CACTCS) and new CAC Outlet Pressure Sensor J-Tube
hardware. The new PCU software has changes to software logic to detect Cabin Air Compressor (CAC)
surge during single CAC operation and to shutdown the CAC. The new pressure sensor J-Tube is installed
to prevent clogging of the pressure sensor port. These changes are to prevent CAC inlet damage in the
event of persistent CAC surge during single CAC operation. Also, during Smarter Environmental Control
System (ECS) and when there are only three CACs operating, the flow is re-distributed to allow more flow
to the single CAC operating on a pack to reduce the potential for CAC surge. If this service bulletin is not
incorporated, operators could experience undetected CAC inlet damage due to material overheat and the
overheat of CAC inlet duct could result in structural degradation along with fumes in the cabin and cockpit.
An in-service reliability issue of a latent flow sensor failure combined with single CAC operation has resulted
in reduced flow and a persistent single CAC surge condition, which caused overheat damage to the CAC
inlet. The overheat temperature during the surge exceeded the 450 degree limit allowable temperature re-
quirement. Overheat temperatures above the limit generated enough heat energy to lose the structural in-
tegrity of the CAC inlet. The PCU software logic to detect the surge was only enabled when both CACs were
operating on the same pack and there was no protection to shut down a single CAC surge. This CAC inlet
overheat damage has caused in-service air conditioning interruption. In addition, a second in-service event
involving Foreign Object Debris (FOD) in the CAC inlet and accumulation at the Ozone Converter also led
to a single CAC persistent surge resulting in material overheat damage to the CAC inlet housing. Also, when
Smarter ECS is engaged and there are only three CACs operating on a pack, the flow is distributed equally
across the CACs. If the flow is low, the single operating CAC on a pack can be driven into surge and left
undetected. The software change to redistribute the airflow to provide more flow to the single CAC reduces
the potential for CAC surge.
This service bulletin gives instructions to install new PCU software and new pressure sensor J-Tube hardware.
The new PCU software and J-Tube will improve in-service reliability and prevent potential CAC inlet overheat
damage due to persistent CAC surge during single CAC operation.
Boeing Service Related Problem (SRP) 787 SRP-21-0206, 787 SRP-21-0237 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 787-FTD-21-12006 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-21-00-0075-00A-932A-
D, Paragraph 1.B., Spares Affected
YesSpares Affected
Data Module SB B787-A-21-00-0075-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
B787-A-21-00-0075-00A-931C-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 7 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 8

Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-21-00-0075-00A-932A-
D, Paragraph 8., Weight and Balance Changes
NoWeight and Balance Changed
Data Module SB B787-A-21-00-0075-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-21-00-0075-00A-932A-
D, Paragraph 11., Publications Affected
YesPublications Affected
Data Module SB B787-A-21-00-0075-00A-932A-
D, Paragraph 11., Publications Affected
NoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Data Module SB B787-A-21-00-0075-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
Data Module SB B787-A-21-00-0075-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-21-00-0075-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
3. ACTION
(CN-AC48804C)
Work Package 1: Install the new PCU software.
Work Package 2: Open access modify the Left Inboard and Left Outboard CAC module in accordance with
UTC Aerospace Systems Hamilton Sundstrand Service Bulletin 7005337-21-1.
Work Package 3: Open access and modify the Right Inboard and Right Outboard CAC module in accordance
with UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7005336-21-1.
4. EFFECTIVITY
787-8 Airplanes. Refer to Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 1., Effectivity for
the list of affected airplanes.
5. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 36 months after the Issue
001 date of this service bulletin.
B787-A-21-00-0075-00A-931C-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 8 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 9

6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes set forth in this service bulletin.
To assist Customers however, Boeing will provide the supplier software referenced in this service bulletin
at no charge. This offer will expire eight years from the original issue date of this service bulletin.
7. MANPOWER
Refer to Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 7., Manpower.
8. MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Data Module SB B787-A-21-00-0075-00A-934A-D, Paragraph 1., Material - Price and Availability.
B787-A-21-00-0075-00A-931C-DApplicable To:
Issue 004, 29 Mar 2017End of data moduleModel 787
See Applicability of this data module
Page 9 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 10

Service Bulletin B787-81205-SB210075-00
PLANNING INFORMATION
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY.
Special Attention:
References
TitleReference
Parts Necessary for Each AirplaneSB B787-A-21-00-0075-00A-934A-D Issue 004,
Paragraph 3.
PACK FLOW CONTROL SYSTEM787 AMM 21-51-00
CABIN AIR COMPRESSOR787 AMM 21-51-19
PACK CONTROL UNIT787 AMM 21-51-20
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
Description
Group 1:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 Airplanes, line numbers 4 - 9, 11, 20 - 383 and 387 - 389,
in one Group. The Variable Numbers and Group information for the applicable airplanes is given below.
An equivalent change is on subsequent production airplanes. Refer to CN-AA48804E and CN-AA48804S
for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 airplanes.-1
Airplane Models: 787-8
Table 2  
GroupVariable Number
1ZA004-ZA006
1ZA100-ZA105
1ZA116-ZA124
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 10 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 11

Table 2  
GroupVariable Number
1ZA135-ZA143
1ZA152-ZA153
1ZA175-ZA189
1ZA195-ZA201
1ZA215-ZA225
1ZA230-ZA250
1ZA260-ZA275
1ZA285-ZA296
1ZA317-ZA324
1ZA327
1ZA334-ZA335
1ZA341-ZA342
1ZA380-ZA389
1ZA430-ZA439
1ZA445-ZA448
1ZA450-ZA457
1ZA460-ZA484
1ZA506-ZA516
1ZA536-ZA545
1ZA560-ZA567
1ZA576-ZA580
1ZA586
1ZA588-ZA593
1ZA610-ZA617
1ZA650-ZA652
1ZA655-ZA663
1ZA665-ZA671
1ZA680-ZA685
1ZA695
1ZA715-ZA716
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 11 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 12

Table 2  
GroupVariable Number
1ZA718-ZA719
1ZA740-ZA741
1ZA768-ZA769
1ZA778-ZA779
1ZA783-ZA784
1ZA817-ZA831
1ZA839
1ZA841-ZA842
1ZA846-ZA848
1ZA853-ZA856
1ZD002
B. Spares Affected
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7005336-21-1 and 7005337-
21-1.
2. Concurrent Requirements
The service bulletins listed below must be done before or at the same time as this service bulletin.
Table 3  
DescriptionService BulletinCompany
AIR CONDITIONING - RH CABIN AIR
COMPRESSOR PACK MODULES - INCOR-
PORATION OF NEW HOUSING AND TUBE
(J-TUBE)
7005336-21-1, Original Issue or Revision 01UTC Aerospace
Systems, (Hamilton
Sundstrand)
AIR CONDITIONING - LH CABIN AIR
COMPRESSOR PACK MODULES - INCOR-
PORATION OF NEW HOUSING AND TUBE
(J-TUBE)
7005337-21-1, Original Issue or Revision 01UTC Aerospace
Systems, (Hamilton
Sundstrand)
3. Reason
Accomplishment of this service bulletin will install new Pack Control Unit (PCU) software for the Cabin Air
Conditioning and Temperature Control System (CACTCS) and new CAC Outlet Pressure Sensor J-Tube
hardware. The new PCU software has changes to software logic to detect Cabin Air Compressor (CAC)
surge during single CAC operation and to shutdown the CAC. The new pressure sensor J-Tube is installed
to prevent clogging of the pressure sensor port. These changes are to prevent CAC inlet damage in the
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 12 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 13

event of persistent CAC surge during single CAC operation. Also, during Smarter Environmental Control
System (ECS) and when there are only three CACs operating, the flow is re-distributed to allow more flow
to the single CAC operating on a pack to reduce the potential for CAC surge. If this service bulletin is not
incorporated, operators could experience undetected CAC inlet damage due to material overheat and the
overheat of CAC inlet duct could result in structural degradation along with fumes in the cabin and cockpit.
An in-service reliability issue of a latent flow sensor failure combined with single CAC operation has resulted
in reduced flow and a persistent single CAC surge condition, which caused overheat damage to the CAC
inlet. The overheat temperature during the surge exceeded the 450 degree limit allowable temperature
requirement. Overheat temperatures above the limit generated enough heat energy to melt the CAC inlet.
The PCU software logic to detect the surge was only enabled when both CACs were operating on the same
pack and there was no protection to shut down a single CAC surge. This CAC inlet overheat damage has
caused in-service air conditioning interruption. In addition, a second in-service event involving Foreign
Object Debris (FOD) in the CAC inlet and accumulation at the Ozone Converter also led to a single CAC
persistent surge resulting in material overheat damage to the CAC inlet housing. Also, when Smarter ECS
is engaged and there are only three CACs operating on a pack, the flow is distributed equally across the
CACs. If the flow is low, the single operating CAC on a pack can be driven into surge and left undetected.
The software change to redistribute the airflow to provide more flow to the single CAC reduces the potential
for CAC surge.
This service bulletin gives instructions to install new PCU software and new pressure sensor J-Tube hard-
ware. The new PCU software and J-Tube will improve in-service reliability and prevent potential CAC inlet
overheat damage due to persistent CAC surge during single CAC operation.
Boeing Service Related Problem (SRP) 787 SRP-21-0206, 787 SRP-21-0237 is related to this service
bulletin.
Boeing Fleet Team Digest (FTD) 787-FTD-21-12006 is related to this service bulletin.
Issue 002 is sent to add compliance information.
Issue 003 is sent to update the revision level for the Hamilton Sundstrand service bulletins. Information
that the FAA will possibly release an Airworthiness Directive (AD) associated with this service bulletin is
also added.
4. Description
Work Package 1: Install the new PCU software.
Work Package 2: Open access modify the Left Inboard and Left Outboard CAC module in accordance with
UTC Aerospace Systems Hamilton Sundstrand Service Bulletin 7005337-21-1.
Work Package 3: Open access and modify the Right Inboard and Right Outboard CAC module in accordance
with UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7005336-21-1.
Effects of this revision on Airplanes on which Issue 001 or Issue 002 was previously done:
None
The work in this service bulletin is done in the maintenance zone(s) given below.
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 13 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 14

Table 4  
Affected Maintenance Zones
ZoneModel
117, 135, 136, 145, 211, 212787-8
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 36 months after the Issue
001 date of this service bulletin.
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
7. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane. This
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour
data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
Table 5  Work Package 1 - PCU Software Installation
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.500.501Install Software
0.500.501Check PCU Soft-
ware
1.001.00TOTAL FOR WORK PACKAGE 1
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 14 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 15

Table 6  Work Package 2 - Left Inboard and Left Outboard CAC Modification
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.751.751Open Access To
Left CAC Pack
Module
*[1]*[1]*[1]Modify The Left
CAC module
1.751.751Close Access
3.503.50TOTAL FOR WORK PACKAGE 2
*[1]  Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7005337-21-1
Table 7  Work Package 3 - Right Inboard and Right Outboard CAC Modification
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.751.751Open Access To
Right CAC module
*[1]*[1]*[1]Modify The Right
CAC module
1.751.751Close Access
3.503.50TOTAL FOR WORK PACKAGE 3
*[1]  Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7005336-21-1
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA48804E
2. Change Notice CN-AA48804S
3. Aircraft Maintenance Manual (AMM) 787 AMM 21-51-00, 787 AMM 21-51-19, 787 AMM 21-51-
20, 787 AMM 45-13-00, 787 AMM 46-13-00
4. Boeing Service Letter 787 SL-00-003
5. Boeing Service Related Problem (SRP) 787 SRP-21-0206, 787 SRP-21-0237
6. UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7005336-21-1
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 15 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 16

7. UTC Aerospace Systems, Hamilton Sundstrand Service Bulletin 7005337-21-1
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 8  
Chapter-SectionPublication
21-51787 Maintenance Manual
21-50787 Fault Isolation Manual
21-51, 46-12787 Illustrated Parts Data
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Refer to Data Module SB B787-A-21-00-0075-00A-934A-D, Paragraph 3., Parts Necessary for Each Airplane,
for interchangeability and intermixability information.
13. Software Accomplishment Summary
1. System affected by this change: Pack Control Unit
2. Software changes which affect operational procedures: None.
3. Other software improvements: None.
B787-A-21-00-0075-00A-932A-DApplicable To:
Issue 004, 29 Mar 2017End of data moduleModel 787
See Applicability of this data module
Page 16 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 17

Service Bulletin B787-81205-SB210075-00
MATERIAL INFORMATION
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY.
Special Attention:
References
TitleReference
ReferencesSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 10.
Description
Group 1:
1. Material - Price and Availability
1. Work Package 1:
Boeing can supply the software shown in Paragraph 3., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The software is subject to the terms and conditions of the Boeing standard purchase order acknowledg-
ment. Prices are in United States Dollars. Terms: Net 30 days.
A. For Boeing provided Loadable Software (LSW) part numbers, order as follows:
Reference this service bulletin and submit your purchase order by one of these methods.
– Order on-line via ATA Spec 2000 or The Boeing PART Page
– Fax to (206) 662-7145
B. For Supplier provided Loadable Software (LSW) part numbers, order the LSW part number from the
supplier.
Operators must order each instance of the Loadable Software (LSW) part numbers in Table 1 -
Loadable Software Attributes as shown in Paragraph 3.B., Parts and Materials Supplied by the Op-
erator. The LSW provider information is available in the Notes column of the Loadable Software
Attributes Table.
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RE-
SPONDER AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE
INFORMATION
2. Work Package 2 and Work Package 3:
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Air-
plane, and Paragraph 4., Parts Necessary to Change Spares.
B787-A-21-00-0075-00A-934A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 17 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 18

2. Industry Support Information
Boeing warranty remedies are not available for the configuration changes set forth in this service bulletin.
To assist Customers however, Boeing will provide the supplier software referenced in this service bulletin
at no charge. This offer will expire eight years from the original issue date of this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
To get the parts/materials shown below, refer to Paragraph 1., Material - Price and Availability.
Work Package 1:
Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4] *[5]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1021431PCU-L CH 1HAM57-21PC-
1020
*[1] *[2] *[3] *[4] *[5]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS2035479PCU-L CH 2HAM57-21PC-
1020
*[1] *[2] *[3] *[4] *[5]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1571467PCU-R CH 1HAM57-21PC-
1020
*[1] *[2] *[3] *[4] *[5]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1861485PCU-R CH 2HAM57-21PC-
1020
*[1] *[2] *[3] *[4] *[5]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1185146CIS MS FSM
MSD-1
HAM57-21PC-
1020
*[1] *[2] *[3] *[6] *[4]
*[5]
21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1765187CIS MS FSM
MSD-2
HAM57-21PC-
1020
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software part number.
*[3]  Boeing provided loadable software.
*[4]  The existing software part number is either HAM57-21PC-0030, HAM50-21PC-0040, HAM51-21PC-0050, HAM52-21PC-0060,
HAM55-21PC-1000 or HAM54-21PC-1010.
*[5]  Reference part number HAM57-21PC1020 for ordering purposes.
*[6]  If the MSD-2 is installed on the airplane.
B787-A-21-00-0075-00A-934A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 18 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 19

Work Package 2 and Work Package 3:
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7005336-21-1 and 7005337-
21-1.
C. Parts Modified and Reidentified:
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7005336-21-1 and 7005337-
21-1.
D. Parts Removed and Not Replaced:
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7005336-21-1 and 7005337-
21-1.
4. Parts Necessary to Change Spares
Refer to UTC Aerospace Systems, Hamilton Sundstrand Service Bulletins 7005336-21-1 and 7005337-21-
1.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-21-00-0075-00A-934A-DApplicable To:
Issue 004, 29 Mar 2017End of data moduleModel 787
See Applicability of this data module
Page 19 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 20

Service Bulletin B787-81205-SB210075-00
ACCOMPLISHMENT INSTRUCTIONS
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY.
Special Attention:
References
TitleReference
ReferencesSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 10.
ManpowerSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 7.
ComplianceSB B787-A-21-00-0075-00A-932A-D Issue 004,
Paragraph 5.
PACK CONTROL UNIT787 AMM 21-51-20
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
CABIN AIR COMPRESSOR787 AMM 21-51-19
PACK FLOW CONTROL SYSTEM787 AMM 21-51-00
Procedure
Group 1:
1. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTI-
CLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, METAL
PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE
TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER
ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-21-00-0075-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours for each
package are given in Data Module SB B787-A-21-00-0075-00A-932A-D, Paragraph 7., Manpower.
You can do each work package independently.
B787-A-21-00-0075-00A-933A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 20 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 21

4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
5. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
6. Refer to 787 AMM 21-51-20 and 787 AMM 45-13-00 as an accepted procedure for the Onboard
Data Load Function (ODLF) and the software check.
7. Refer to 787 AMM 46-13-00 as an accepted procedure to stage software on a Mass Storage
Device (MSD).
8. The compliance times for the actions in Step 2., Work Instructions are in Data Module SB B787-
A-21-00-0075-00A-932A-D, Paragraph 5., Compliance.
9. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
2. WORK INSTRUCTIONS
A. Work Package 1 - Pack Control Unit (PCU) Software Installation.
NOTE: The procedure for staging software on a Mass Storage Device (MSD) is provided for reference
only. The operators can use their own procedure to stage the software on the MSD(s). Boeing
recommends that operators maintain the latest software on the MSD(s) so that it is available if
the software should become necessary, such as due to an unplanned component change. Refer
to Boeing Service Letter 787 SL-00-003 for more information. 
B787-A-21-00-0075-00A-933A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 21 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 22

(1) Install the new software listed in the Loadable Software Attributes table below. Refer to 787 AMM
21-51-20 and 787 AMM 46-13-00 as accepted procedures.
Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1185146CIS MS FSM
MSD-1
HAM57-21PC-
1020
*[1] *[2] *[3] *[4]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1765187CIS MS FSM
MSD-2
HAM57-21PC-
1020
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  The existing software part number is either HAM57-21PC-0030, HAM50-21PC-0040, HAM51-21PC-0050, HAM52-21PC-0060,
HAM55-21PC-1000 or HAM54-21PC-1010.
*[4]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
(2) Install each instance of the software listed in the Loadable Software Attributes table below and do
a software check. Refer to 787 AMM 21-51-20 and 787 AMM 45-13-00 as accepted procedures.
Table 2  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1021431PCU-L CH 1HAM57-21PC-
1020
*[1] *[2] *[3]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS2035479PCU-L CH 2HAM57-21PC-
1020
*[1] *[2] *[3]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1571467PCU-R CH 1HAM57-21PC-
1020
*[1] *[2] *[3]21 PCU OPSPACK CON-
TROL UNIT
(PCU)
LS1861485PCU-R CH 2HAM57-21PC-
1020
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  The existing software part number is either HAM57-21PC-0030, HAM50-21PC-0040, HAM51-21PC-0050, HAM52-21PC-0060,
HAM55-21PC-1000 or HAM54-21PC-1010.
(3) Put the airplane back to a serviceable condition
B. Work Package 2 - Left Inboard and Left Outboard Cabin Air Compressor (CAC) Modification.
B787-A-21-00-0075-00A-933A-DApplicable To:
Issue 004, 29 Mar 2017Model 787
See Applicability of this data module
Page 22 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

### Page 23

(1) Get access to the Left Inboard and Left Outboard CAC module. Refer to 787 AMM 21-51-19 as an
accepted procedure.
(2) Modify the Left Inboard and Left Outboard CAC module in accordance with UTC Aerospace Systems,
Hamilton Sundstrand Service Bulletin 7005337-21-1.
(3) Close access to the Left Inboard and Left Outboard CAC module. Refer to 787 AMM 21-51-19 as
an accepted procedure.
(4) Test the Pack Flow Control System. Refer to 787 AMM 21-51-00 as an acceptable procedure.
(5) Put the airplane back to a serviceable condition.
C. Work Package 3 - Right Inboard and Right Outboard CAC Modification.
(1) Get access to the Right Inboard and Right Outboard CAC module. Refer to 787 AMM 21-51-19 as
an accepted procedure.
(2) Modify the Right Inboard and Right Outboard CAC module in accordance with UTC Aerospace
Systems, Hamilton Sundstrand Service Bulletin 7005336-21-1.
(3) Close access to the Right Inboard and Right Outboard CAC module. Refer to 787 AMM 21-51-19
as an accepted procedure.
(4) Test the Pack Flow Control System. Refer to 787 AMM 21-51-00 as an acceptable procedure.
(5) Put the airplane back to a serviceable condition.
B787-A-21-00-0075-00A-933A-DApplicable To:
Issue 004, 29 Mar 2017End of data moduleModel 787
See Applicability of this data module
Page 23 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB210075-00
Issue 003, 29 Mar 2017
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
