# Boeing Service Bulletin B787-81205-SB240027-00

Copy: Revision 002 ("SB B787-81205-SB240027-00 Issue 002"), 59 pages: PDF https://openairdocs.org/files/sha256/48/9d/489df2640412b97a7c895ba6ae41f39a4b81c220ace2dfae892c94ffe5bfb1aa; text https://openairdocs.org/service-documents/boeing/b787-81205-sb240027-00/file/489df2640412.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9439; AD 2017-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB240027-00
- Latest revision known: B787-81205-SB240027-00, Issue 002, dated September 6, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb240027-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-09-08](https://openairdocs.org/ad/2017-09-08.md), effective Jun 27, 2017: Revisions 001 and 002

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb240027-00/proposed.md).

## Text (59 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-9439; AD 2017-09-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Service Bulletin B787-81205-SB240027-00 ELECTRICAL POWER -
Electrical Power Generation and Start System - Variable Frequency Starter
Generator Terminal Lugs Installation Inspection and Change
Issue 002, 06 Sep 2016B787-81205-SB240027-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 Airplanes. Refer to Data Module SB B787-A-24-00-0027-00A-932A-D, Paragraph 1., Effectivity for the
list of affected airplanes.
B787-81205-SB240027-00TITLE PAGE
Issue 002, 06 Sep 2016
Page 1 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 2

Alert Service Bulletin B787-81205-SB240027-00
Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
B. Spares Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
A. Existing Data:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
B. Data Supplied with this Service Bulletin:  . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  . . . 17
11. Publications Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . 17
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. Industry Support Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
A. Kits/Parts:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
B. Parts and Materials Supplied by the Operator:  . . . . . . . . . . . . . . . . . . . . . . . 18
C. Parts Modified and Reidentified:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
D. Parts Removed and Not Replaced:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. Special Tooling Necessary to do this Service Bulletin  . . . . . . . . . . . . . . . . . . . . . 19
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Task 1 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS
INSPECTION - RIGHT WING [Group 1:]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Task 2 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS
INSPECTION - LEFT WING [Group 1:] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
B787-81205-SB240027-00TABLE OF CONTENTS
Issue 002, 06 Sep 2016
Page 2 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 3

Task 3 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS
ROTATION - RIGHT WING [Group 1:] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Task 4 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS
ROTATION - LEFT WING [Group 1:]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B787-81205-SB240027-00TABLE OF CONTENTS
Issue 002, 06 Sep 2016
Page 3 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 4

Alert Service Bulletin B787-81205-SB240027-00
List of Illustrations
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Description
Group 1:
Table 1  List of Illustrations - Alert Service Bulletin B787-81205-SB240027-00
Used InICN
B787-A-24-00-0027-00A-931C-D Issue 003ICN-B787-A-000061-A-81205-06168-A-01-1
B787-A-24-00-0027-01A-933B-D Issue 003ICN-B787-A-000061-A-81205-06169-A-01-1
B787-A-24-00-0027-01A-933B-D Issue 003ICN-B787-A-000061-A-81205-06170-A-01-1
B787-A-24-00-0027-02A-933B-D Issue 003ICN-B787-A-000061-A-81205-06171-A-02-1
B787-A-24-00-0027-02A-933B-D Issue 003ICN-B787-A-000061-A-81205-06172-A-01-1
B787-A-24-00-0027-03A-933B-D Issue 003ICN-B787-A-000061-A-81205-06173-A-01-1
B787-A-24-00-0027-03A-933B-D Issue 003ICN-B787-A-000061-A-81205-06174-A-01-1
B787-A-24-00-0027-03A-933B-D Issue 003ICN-B787-A-000061-A-81205-06175-A-01-1
B787-A-24-00-0027-04A-933B-D Issue 003ICN-B787-A-000061-A-81205-06176-A-01-1
B787-A-24-00-0027-04A-933B-D Issue 003ICN-B787-A-000061-A-81205-06177-A-01-1
B787-A-24-00-0027-04A-933B-D Issue 003ICN-B787-A-000061-A-81205-06178-A-01-1
B787-A-24-00-0027-00A-00AA-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 4 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 5

Alert Service Bulletin B787-81205-SB240027-00
List of Effective Data Modules
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Description
Group 1:
Table 1  List of Effective Data Modules - Alert Service Bulletin B787-81205-SB240027-00
Issue DateIssue StatusIssueData Module – Information Name
2016-09-06Changed003B787-A-24-00-0027-00A-00AA-D – List of Illustrations
2016-09-06Changed003B787-A-24-00-0027-00A-00SA-D – List of Effective Data Modules
2016-09-06New001B787-A-24-00-0027-00A-931B-D – Revision Transmittal Information
2016-09-06Changed003B787-A-24-00-0027-00A-931C-D – Summary
2016-09-06Changed003B787-A-24-00-0027-00A-932A-D – PLANNING INFORMATION
2016-09-06Changed003B787-A-24-00-0027-00A-934A-D – MATERIAL INFORMATION
2016-09-06Changed003B787-A-24-00-0027-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
2016-09-06Changed003B787-A-24-00-0027-01A-933B-D – Task 1 – VARIABLE FREQUENCY
SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS IN-
SPECTION - RIGHT WING [Group 1:]
2016-09-06Changed003B787-A-24-00-0027-02A-933B-D – Task 2 – VARIABLE FREQUENCY
SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS IN-
SPECTION - LEFT WING [Group 1:]
2016-09-06Changed003B787-A-24-00-0027-03A-933B-D – Task 3 – VARIABLE FREQUENCY
SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS RO-
TATION - RIGHT WING [Group 1:]
2016-09-06Changed003B787-A-24-00-0027-04A-933B-D – Task 4 – VARIABLE FREQUENCY
SIGNAL GENERATOR POWER FEEDER CABLE TERMINAL LUGS RO-
TATION - LEFT WING [Group 1:]
B787-A-24-00-0027-00A-00SA-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 5 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 6

Alert Service Bulletin B787-81205-SB240027-00
Revision Transmittal Information
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
AirplanesSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 1.A.
Description
Group 1:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this revision on Airplanes on which Issue 001 was previously done:
None.
2. REASON FOR REVISION
This issue is sent to add airplane line number 77 to the service bulletin effectivity, and remove line numbers
72, 76, 89, 92, 94, 95, 97, 98 and 99 from the service bulletin effectivity.
These sections were changed:
1. SUMMARY, Paragraph 2., Background, updated Table 1.
2. PLANNING INFORMATION, Paragraph 1.A., Airplanes, updated Change Notice reference and added
and deleted airplane(s) in the service bulletin effectivity.
3. PLANNING INFORMATION, Paragraph 3., Reason, added reason for revision information.
4. PLANNING INFORMATION, Paragraph 4., Description, added effects of revision information.
5. PLANNING INFORMATION, Paragraph 5., Compliance, added statement.
6. PLANNING INFORMATION, Paragraph 10.A., Existing Data, updated Change Notice reference.
Change marks are added, except in Data Module SB B787-A-24-00-0027-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
B787-A-24-00-0027-00A-931B-DApplicable To:
Issue 001, 06 Sep 2016Model 787
See Applicability of this data module
Page 6 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 7

3. REVISION HISTORY
Table 1  
January 21, 2014Issue 1:
September 06, 2016Issue 2:
B787-A-24-00-0027-00A-931B-DApplicable To:
Issue 001, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 7 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 8

Alert Service Bulletin B787-81205-SB240027-00
Summary
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Spares AffectedSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 1.B.
ComplianceSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 5.
Weight and Balance ChangesSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 8.
Electrical Load DataSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 9.
Publications AffectedSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 11.
Kits/PartsSB B787-A-24-00-0027-00A-934A-D Issue 003,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-24-00-0027-00A-934A-D Issue 003,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-24-00-0027-00A-934A-D Issue 003,
Paragraph 6.
EffectivitySB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 1.
Industry Support InformationSB B787-A-24-00-0027-00A-934A-D Issue 003,
Paragraph 2.
ManpowerSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 7.
Material - Price and AvailabilitySB B787-A-24-00-0027-00A-934A-D Issue 003,
Paragraph 1.
B787-A-24-00-0027-00A-931C-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 8 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 9

Description
Group 1:
1. CONCURRENT REQUIREMENTS
None.
2. BACKGROUND
Accomplishment of this service bulletin will make sure that the Variable Frequency Starter Generator (VFSG)
power feeder cable terminal lugs on the left and right wings are correctly installed in accordance with released
engineering. If the inspection/change in this service bulletin is not done, incorrectly installed terminal lugs
may contact adjacent structure and get damaged. The damaged terminal lugs could cause electrical arcing
in a flammable leakage zone which will result in an electrical short and potential loss of several functions
essential for safe flight.
During an airplane inspection in production, VFSG Power Feeder Cables were found to contain terminal
lugs incorrectly installed common to terminal blocks located in the wing front spar. The lugs were close to
the structure causing the lug sleeve to come in contact with adjacent fasteners. At the time of the release
of the Issue 001 of this service bulletin, operators have not reported any issues with the Power Feeder Cables.
This service bulletin provides instructions to do a General Visual Inspection of the VFSG power feeder lugs
installation at the terminal block and rotating the lugs, if required. If the power feeder lugs are incorrectly
installed, they should be rotated to the correct installation so that the separation requirements are met and
potential of arcing is eliminated.
Boeing Service Related Problem (SRP) 787 SRP-24-0154 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-24-00-0027-00A-932A-
D, Paragraph 1.B., Spares Affected
NoSpares Affected
Data Module SB B787-A-24-00-0027-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
Data Module SB B787-A-24-00-0027-00A-932A-
D, Paragraph 8., Weight and Balance Changes
NoWeight and Balance Changed
Data Module SB B787-A-24-00-0027-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-24-00-0027-00A-932A-
D, Paragraph 11., Publications Affected
NoPublications Affected
Data Module SB B787-A-24-00-0027-00A-932A-
D, Paragraph 11., Publications Affected
NoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Data Module SB B787-A-24-00-0027-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
B787-A-24-00-0027-00A-931C-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 9 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 10

Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-24-00-0027-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-24-00-0027-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
3. ACTION
(CN-AA43907B)
On the right and left wings, section 16, do a General Visual Inspection of the VFSG Power Feeder Cables
at the terminal block to make sure that all 16 (eight for each wing) terminal lugs are correctly installed.
Work Package 1: Right Wing
1. If the terminal lugs are correctly installed, no further action is required against the VFSG Power Feeder
Cables.
2. If the terminal lugs are not correctly installed, rotate the lugs at the VFSG terminal block to the correct
installation and do an operational test.
Work Package 2: Left Wing
1. If the terminal lugs are correctly installed, no further action is required against the VFSG Power Feeder
Cables.
2. If the terminal lugs are not correctly installed, rotate the lugs at the VFSG terminal block to the correct
installation and do an operational test.
4. EFFECTIVITY
787-8 Airplanes. Refer to Data Module SB B787-A-24-00-0027-00A-932A-D, Paragraph 1., Effectivity for
the list of affected airplanes.
5. COMPLIANCE
Refer to data module Data Module SB B787-A-24-00-0027-00A-932A-D, Paragraph 5., Compliance.
6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of August 07, 2013. Please refer to
data module Data Module SB B787-A-24-00-0027-00A-934A-D, Paragraph 2., Industry Support Information.
The warranty remedies will expire eight years from the original release date of this service bulletin.
7. MANPOWER
Refer to data module Data Module SB B787-A-24-00-0027-00A-932A-D, Paragraph 7., Manpower.
8. MATERIAL INFORMATION
Operator Supplied Parts/Materials.
B787-A-24-00-0027-00A-931C-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 10 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 11 (OCR)

@ BOEING  B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN
Refer to data module Data Module SB B787-A-24-00-0027-00A-934A-D, Paragraph 1., Material - Price and
Availability.
DO A GENERAL VISUAL INSPECTION OF THE VARIABLE FREQUENCY STARTER
GENERATOR POWER FEEDER CABLES AT THE TERMINAL BLOCK. IF THE
TERMINAL LUGS ARE NOT CORRECTLY INSTALLED, ROTATE THE LUGS AT THE
TERMINAL BLOCK TO THE CORRECT INSTALLATION AND DO AN OPERATIONAL TEST
TYPICAL
ICN-B787-A-000061-A-81205-06168-A-01-1
Figure 1
Applicable To:  B787-A-24-00-0027-00A-931C-D
Model 787  End of data module  Issue 003, 06 Sep 2016
See Applicability of this data module
Page 11 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 12

Alert Service Bulletin B787-81205-SB240027-00
PLANNING INFORMATION
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN PARAGRAPH 1., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED
Alert:
OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES
HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
References
TitleReference
Work InstructionsSB B787-A-24-00-0027-00A-933A-D Issue 003, Step 2.
Standard Wiring Practices ManualSWPM 20-10-11
Standard Wiring Practices ManualSWPM 20-10-12
Standard Wiring Practices ManualSWPM 20-10-19
Standard Wiring Practices ManualSWPM 20-30-00
WING ACCESS DOORS AND PANELS787 AMM 06-44-00
ELECTRICAL POWER GENERATION AND START
SYSTEM
787 AMM 24-21-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
LEADING EDGE SLAT SYSTEM787 AMM 27-81-00
Description
Group 1:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 Airplanes, line numbers 7-9, 23-24, 27, 29, 31, 33, 35, 37-
38, 40-42, 44-71, 74-75, 77-78, 80, 82-84, and 86 in 1 Group. The Variable Numbers and Group infor-
mation for the applicable airplanes is given below. Refer to CN-AA43907B for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes-1
Airplane Models: 787-8
B787-A-24-00-0027-00A-932A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 12 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 13

Table 2  
GroupVariable Number
1ZA100-ZA105
1ZA116-ZA119
1ZA135
1ZA177-ZA183
1ZA233
1ZA236-ZA240
1ZA261-ZA264
1ZA270-ZA272
1ZA285-ZA290
1ZA460-ZA464
1ZA506-ZA512
1ZA536-ZA538
B. Spares Affected
None.
2. Concurrent Requirements
None.
3. Reason
Accomplishment of this service bulletin will make sure that the Variable Frequency Starter Generator (VFSG)
power feeder cable terminal lugs on the left and right wings are correctly installed in accordance with released
engineering. If the inspection/change in this service bulletin is not done, incorrectly installed terminal lugs
may contact adjacent structure and get damaged. The damaged terminal lugs could cause electrical arcing
in a flammable leakage zone which will result in an electrical short and potential loss of several functions
essential for safe flight.
During an airplane inspection in production, VFSG Power Feeder Cables were found to contain terminal
lugs incorrectly installed common to terminal blocks located in the wing front spar. The lugs were close to
the structure causing the lug sleeve to come in contact with adjacent fasteners. At the time of the release
of the Issue 001 of this service bulletin, operators have not reported any issues with the Power Feeder
Cables.
This service bulletin provides instructions to do a General Visual Inspection of the VFSG power feeder lugs
installation at the terminal block and rotating the lugs, if required. If the power feeder lugs are incorrectly
installed, they should be rotated to the correct installation so that the separation requirements are met and
potential of arcing is eliminated.
Boeing Service Related Problem (SRP) 787 SRP-24-0154 is related to this service bulletin.
B787-A-24-00-0027-00A-932A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 13 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 14

Issue 2 is sent to add airplane line number 77 to the service bulletin effectivity, and remove line numbers
72, 76, 89, 92, 94, 95, 97, 98 and 99 from the service bulletin effectivity.
4. Description
The work instructions are divided into two work packages. You can do each work package independently.
On the right and left wings, section 16, do a General Visual Inspection of the VFSG Power Feeder Cables
at the terminal block to make sure that all 16 (eight for each wing) terminal lugs are correctly installed.
Work Package 1: Right Wing
1. If the terminal lugs are correctly installed, no further action is required against the VFSG Power Feeder
Cables.
2. If the terminal lugs are not correctly installed, rotate the lugs at the VFSG terminal block to the correct
installation and do an operational test.
Work Package 2: Left Wing
1. If the terminal lugs are correctly installed, no further action is required against the VFSG Power Feeder
Cables.
2. If the terminal lugs are not correctly installed, rotate the lugs at the VFSG terminal block to the correct
installation and do an operational test.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None
The work in this service bulletin is done in the maintenance zone(s) given below.
Table 3  
Affected Maintenance Zones
ZoneModel
513, 613787-8
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Do the required actions in accordance with data module Data Module SB B787-A-24-00-0027-00A-933A-
D, Step 2., Work Instructions.
The Conditions, Actions and Compliance times shown apply to each wing independently.
B787-A-24-00-0027-00A-932A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 14 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 15

Table 4  INSPECTION/ROTATION OF THE VFSG POWER FEEDER TERMINAL LUGS
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-WITHIN 12
MONTHS AFTER
THE ORIGINAL
ISSUE DATE OF
THIS SERVICE
BULLETIN
DO WORK PACKAGE 1
AND 2, AND PERFORM
A GENERAL VISUAL IN-
SPECTION OF THE
RIGHT AND LEFT WING,
SECTION 16, VFSG
POWER FEEDER CABLE
TERMINAL LUGS FOR
CORRECT INSTALLA-
TION
ALL AIRPLANES
--NO FURTHER ACTION
REQUIRED TO COR-
RECT THE TERMINAL
LUGS INSTALLATION
WORK PACKAGE 1,
CONDITION 1: ALL TER-
MINAL LUGS CORRECT-
LY INSTALLED
-BEFORE FUR-
THER FLIGHT
DO CHANGES TO RO-
TATE AND REINSTALL
TERMINAL LUGS
WORK PACKAGE 1,
CONDITION 2: ANY TER-
MINAL LUGS INCOR-
RECTLY INSTALLED
--NO FURTHER ACTION
REQUIRED TO COR-
RECT THE TERMINAL
LUGS INSTALLATION
WORK PACKAGE 2,
CONDITION 1: ALL TER-
MINAL LUGS CORRECT-
LY INSTALLED
-BEFORE FUR-
THER FLIGHT
DO CHANGES TO RO-
TATE AND REINSTALL
TERMINAL LUGS
WORK PACKAGE 2,
CONDITION 2: ANY TER-
MINAL LUGS INCOR-
RECTLY INSTALLED
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
B787-A-24-00-0027-00A-932A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 15 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 16

7. Manpower
Table 5  WORK PACKAGE 1 - RIGHT WING
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.501.501Open Access
0.800.801Task 1
3.00*[1]6.00*[1]2*[1]Task 3
1.501.501Close Access
1.00*[1]3.00*[1]3*[1]Test
3.803.80TOTAL FOR EACH AIRPLANE
*[1]  Estimates given dependant upon the inspection results.
Table 6  WORK PACKAGE 2 - LEFT WING
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.501.501Open Access
0.800.801Task 2
3.00*[1]6.00*[1]2*[1]Task 4
1.501.501Close Access
1.00*[1]3.00*[1]3*[1]Test
3.803.80TOTAL FOR EACH AIRPLANE
*[1]  Estimates given dependant upon the inspection results.
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA43907B.
2. Aircraft Maintenance Manual (AMM) 787 AMM 06-44-00, 787 AMM 24-21-00, 787 AMM 24-22-
00, 787 AMM 27-81-00.
3. Boeing Service Related Problem (SRP) 787 SRP-24-0154.
B787-A-24-00-0027-00A-932A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 16 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 17

4. Standard Wiring Practices Manual (SWPM) SWPM 20-10-11, SWPM 20-10-12, SWPM 20-10-19,
SWPM 20-30-00.
5. 787-8 Structural Repair Manual (SRM) 51-20-05, 51-41-07, 51-43-07.
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
13. Software Accomplishment Summary
Not Affected.
B787-A-24-00-0027-00A-932A-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 17 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 18

Alert Service Bulletin B787-81205-SB240027-00
MATERIAL INFORMATION
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 10.
Description
Group 1:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane.
2. Industry Support Information
Boeing warranty remedies are available for 787 airplanes in warranty as of August 07, 2013. For inspection
task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Fleet
Support Contracts - Warranty. If the condition described in this service bulletin is found during the inspection
for airplanes in warranty as of that date and additional task hours and parts, and/or special tools are required,
send a warranty claim to Boeing Fleet Support Contracts - Warranty. Please refer to this service bulletin
number and reference the airplane variable number in your purchase order. The warranty remedies will
expire eight years from the original release date of this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
Table 1  
NotesNameQTYPart Number /
Specification
*[1]Self Locking Nut32BACN10YR6CM
*[2] *[1]Washer32BACW10BP6PK
B787-A-24-00-0027-00A-934A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 18 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 19

Table 1  
NotesNameQTYPart Number /
Specification
*[1]Sealant8 ouncesBMS 5-45, CLASS
B
*[1]Lacing Tape1 rollBMS 13-54, Grade
D, Type 3, Class
1, Finish C
*[1]  See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
*[2]  Part Number BACW10BP6PK or NAS1149V0616M may have been used in the delivered configuration.
C. Parts Modified and Reidentified:
None.
D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in data module Data Module SB B787-A-24-00-0027-00A-932A-D,
Paragraph 10., References, can be necessary. Examine operator tool supply to make sure all necessary
tools are available.
B787-A-24-00-0027-00A-934A-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 19 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 20

Alert Service Bulletin B787-81205-SB240027-00
ACCOMPLISHMENT INSTRUCTIONS
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 10.
ManpowerSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 7.
ComplianceSB B787-A-24-00-0027-00A-932A-D Issue 003,
Paragraph 5.
Standard Wiring Practices ManualSWPM 20-10-11
Standard Wiring Practices ManualSWPM 20-10-12
Standard Wiring Practices ManualSWPM 20-10-19
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
LEADING EDGE SLAT SYSTEM787 AMM 27-81-00
WING ACCESS DOORS AND PANELS787 AMM 06-44-00
ELECTRICAL POWER GENERATION AND START
SYSTEM
787 AMM 24-21-00
Procedure
Group 1:
1. GENERAL INFORMATION
NOTE: 1. Manual titles are referred to by acronyms. Refer to data module Data Module SB B787-A-24-
00-0027-00A-932A-D, Paragraph 10., References, for definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours for each
package are given in data module Data Module SB B787-A-24-00-0027-00A-932A-D, Paragraph
7., Manpower. You can do each work package independently.
B787-A-24-00-0027-00A-933A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 20 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 21

4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Airplane
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Airplane Main-
tenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures, and
SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
6. The necessary conditions for selection of clamp type and size are included in SWPM 20-10-12.
If any wire bundle support clamp specified in this service bulletin does not make a correct fit on
the wire bundle, refer to SWPM 20-10-12 as an accepted procedure to select a clamp that fits
correctly.
7. A General Visual Inspection is defined as: A visual examination of an interior or exterior area,
installation or assembly to detect obvious damage, failure or irregularity. This level of inspection
is made from within touching distance unless otherwise specified. A mirror may be necessary
to ensure visual access to all surfaces in the inspection area. This level of inspection is made
under normal available lighting conditions such as daylight, hangar lighting, flashlight or drop-
light and may require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
8. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
9. The instructions in Step 2., Work Instructions and the Tasks can include operation of tools or
test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual,
and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools
or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to
use superseded tools.
10. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
B787-A-24-00-0027-00A-933A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 21 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 22

11. Where the work instructions include installation of a kept part, a new or serviceable part with
the same part number can be installed as an alternative to the kept part.
12. This service bulletin includes functional test procedures for the systems changed by this service
bulletin. More functional tests can possibly be necessary in accordance with standard mainte-
nance practices because of interruption to other airplane systems.
13. If shading is used, shaded areas in Figures are to separate the non-critical and non-authoritative
information from the critical and authoritative information.
14. The compliance times for the actions in Step 2., Work Instructions are in data module Data
Module SB B787-A-24-00-0027-00A-932A-D, Paragraph 5., Compliance.
2. WORK INSTRUCTIONS
A. WORK PACKAGE 1: GENERAL VISUAL INSPECTION OF SECTION 16 OF THE RIGHT WING
VARIABLE FREQUENCY STARTER GENERATOR (VFSG) POWER FEEDER CABLES TERMINAL
LUGS FOR CORRECT INSTALLATION
(1) Remove the electrical power from the airplane. Refer to 787 AMM 24-22-00 as an accepted procedure.
(2) Lock and secure the flaps. Refer to 787 AMM 27-81-00 as an accepted procedure.
(3) Remove the right Krueger Flap Gap Cover panel 613CT. Refer to 787 AMM 06-44-00 as an accepted
procedure for panel location.
(4) Do a General Visual Inspection of the right wing Variable Frequency Starter Generator (VFSG)
Power Feeder Cables Lugs for correct installation in accordance with Task 1.
(a) CONDITION 1: ALL TERMINAL LUGS CORRECTLY INSTALLED
1) Install the right Krueger Flap Gap Cover panel 613CT. Refer to 787 AMM 06-44-00 as an
accepted procedure for panel location.
2) Unlock and release the flaps. Refer to 787 AMM 27-81-00 as an accepted procedure.
3) Restore the electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted
procedure.
4) No further action required to correct terminal lug installation.
(b) CONDITION 2: ANY TERMINAL LUGS INCORRECTLY INSTALLED
1) Do changes to rotate and reinstall terminal lugs in accordance with Task 3.
2) Install the right Krueger Flap Gap Cover panel 613CT. Refer to 787 AMM 06-44-00 as an
accepted procedure for panel location.
3) Unlock and release the flaps. Refer to 787 AMM 27-81-00 as an accepted procedure.
4) Restore the electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted
procedure.
5) Do an operational test on the VFSG. Refer to 787 AMM 24-21-00 as an accepted procedure.
(5) Put the airplane back to a serviceable condition.
B787-A-24-00-0027-00A-933A-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 22 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 23

B. WORK PACKAGE 2: GENERAL VISUAL INSPECTION OF SECTION 16 OF THE LEFT WING
VARIABLE FREQUENCY STARTER GENERATOR (VFSG) POWER FEEDER CABLES TERMINAL
LUGS FOR CORRECT INSTALLATION
(1) Remove the electrical power from the airplane. Refer to 787 AMM 24-22-00 as an accepted procedure.
(2) Lock and secure the flaps. Refer to 787 AMM 27-81-00 as an accepted procedure.
(3) Remove the left Krueger Flap Gap Cover panel 513CT. Refer to 787 AMM 06-44-00 as an accepted
procedure for panel location.
(4) Do a General Visual Inspection of the left wing Variable Frequency Starter Generator (VFSG) Power
Feeder Cables Lugs for correct installation in accordance with Task 2.
(a) CONDITION 1: ALL TERMINAL LUGS CORRECTLY INSTALLED
1) Install the left Krueger Flap Gap Cover panel 513CT. Refer to 787 AMM 06-44-00 as an
accepted procedure for panel location.
2) Unlock and release the flaps. Refer to 787 AMM 27-81-00 as an accepted procedure.
3) Restore the electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted
procedure.
4) No further action required to correct terminal lug installation.
(b) CONDITION 2: ANY TERMINAL LUGS INCORRECTLY INSTALLED
1) Do changes to rotate and reinstall terminal lugs in accordance with Task 4.
2) Install the left Krueger Flap Gap Cover panel 513CT. Refer to 787 AMM 06-44-00 as an
accepted procedure for panel location.
3) Unlock and release the flaps. Refer to 787 AMM 27-81-00 as an accepted procedure.
4) Restore the electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted
procedure.
5) Do an operational test on the VFSG. Refer to 787 AMM 24-21-00 as an accepted procedure.
(5) Put the airplane back to a serviceable condition.
B787-A-24-00-0027-00A-933A-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 23 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 24

Alert Service Bulletin B787-81205-SB240027-00
Task 1 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER
CABLE TERMINAL LUGS INSPECTION - RIGHT WING [Group 1:]
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Standard Wiring Practices ManualSWPM 20-30-00
Preliminary Requirements
Required Conditions
Data Module/Technical PublicationAction/Condition
B787-A-24-00-0027-00A-933A-D Issue 003Alert Service Bulletin B787-81205-SB240027-00 -
ACCOMPLISHMENT INSTRUCTIONS
B787-A-24-00-0027-01A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 24 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 25

Procedure
This Task applies to Group 1:
ICN-B787-A-000061-A-81205-06169-A-01-1
Figure 1  
B787-A-24-00-0027-01A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 25 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 26

ICN-B787-A-000061-A-81205-06170-A-01-1
Figure 2  
B787-A-24-00-0027-01A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 26 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 27

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for right side of the airplane.
Table 1  
More DataQtyIdentificationNameActionStep
Do a General Visual
Inspection and deter-
mine if the installa-
tion of the terminal
lugs is in accor-
dance with Task 1
figure. Refer to SW-
PM 20-30-00 as an
accepted procedure.
8-VFSG Power Feeder
Terminal Lugs
Inspect1
B787-A-24-00-0027-01A-933B-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 27 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 28

Alert Service Bulletin B787-81205-SB240027-00
Task 2 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER
CABLE TERMINAL LUGS INSPECTION - LEFT WING [Group 1:]
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Standard Wiring Practices ManualSWPM 20-30-00
Preliminary Requirements
Required Conditions
Data Module/Technical PublicationAction/Condition
B787-A-24-00-0027-00A-933A-D Issue 003Alert Service Bulletin B787-81205-SB240027-00 -
ACCOMPLISHMENT INSTRUCTIONS
B787-A-24-00-0027-02A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 28 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 29 (OCR)

Q BOEING  B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN
Procedure
This Task applies to Group 1:
INBD
FWD
ICN-B787-A-000061-A-81205-06171-A-02-1
Figure 1
Applicable To:  B787-A-24-00-0027-02A-933B-D
Model 787  Issue 003, 06 Sep 2016
See Applicability of this data module
Page 29 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 30

ICN-B787-A-000061-A-81205-06172-A-01-1
Figure 2  
B787-A-24-00-0027-02A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 30 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 31

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for left side of the airplane.
Table 1  
More DataQtyIdentificationNameActionStep
Do a General Visual
Inspection and deter-
mine if the installa-
tion of the terminal
lugs is in accor-
dance with Task 2
figure. Refer to SW-
PM 20-30-00 as an
accepted procedure.
8-VFSG Power Feeder
Terminal Lugs
Inspect1
B787-A-24-00-0027-02A-933B-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 31 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 32

Alert Service Bulletin B787-81205-SB240027-00
Task 3 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER
CABLE TERMINAL LUGS ROTATION - RIGHT WING [Group 1:]
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Standard Wiring Practices ManualSWPM 20-30-00
Standard Wiring Practices ManualSWPM 20-10-11
Preliminary Requirements
Required Conditions
Data Module/Technical PublicationAction/Condition
B787-A-24-00-0027-00A-933A-D Issue 003Alert Service Bulletin B787-81205-SB240027-00 -
ACCOMPLISHMENT INSTRUCTIONS
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 32 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 33

Procedure
This Task applies to Group 1:
ICN-B787-A-000061-A-81205-06173-A-01-1
Figure 1  
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 33 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 34

ICN-B787-A-000061-A-81205-06174-A-01-1
Figure 2  
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 34 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 35

ICN-B787-A-000061-A-81205-06175-A-01-1
Figure 3  
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for the left side of the airplane.
Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
3BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep1
3NAS1149D0316JWASHER, FLATRemove / Keep
3BACC10NA103CLAMPRemove / Keep
3NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Remove / Keep
3BACC10NA105CLAMPRemove / Keep
3NAS1149D0316JWASHER, FLATRemove / Keep
3BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 35 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 36

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
4BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep2
4NAS1149D0316JWASHER, FLATRemove / Keep
4BACC10NA103CLAMPRemove / Keep
4NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Remove / Keep
4BACC10NA106CLAMPRemove / Keep
4NAS1149D0316JWASHER, FLATRemove / Keep
4BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
6BACS12GU3K9SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep3
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Remove / Keep
6BACC10JU104CLAMP, LOOP,
HINGED BAND, SILI-
CONE CUSHION
Remove / Keep
6BACC10GF32CTCLAMP, U-TYPE,
WITH OR WITHOUT
CROSSBAR, ALU-
MINUM, STEEL, OR
CRES, SILICONE CUS
Remove / Keep
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Remove / Keep
6BACN10YR3CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 36 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 37

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
1BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep4
1NAS1149D0316JWASHER, FLATRemove / Keep
1BACC10NA103CLAMPRemove / Keep
1NAS42DD6-48FCSPACER, SLEEVE-
RIVET
Remove / Keep
1BACC10NA105CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Remove / Keep
1NAS1149D0316JWASHER, FLATRemove / Keep
1BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
Refer to 787-8 SRM
51-41-07 as an ac-
cepted procedure.
6BACS12GU3K16SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep5
6BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Remove / Keep
3-CLAMPRemove / Keep
Carefully move to
access the Terminal
Lug Cover
4-GUARD WIRESMove6
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
4-SCREW AND WASH-
ER
Remove / Keep7
2-TERMINAL BOARD
COVER
Remove / Keep8
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 37 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 38

Table 1  
More DataQtyIdentificationNameActionStep
CAUTION: USE CAUTION TO PREVENT DAMAGE TO THE TERMINAL LUGS AND THE GREY COLD-
SHRINK SLEEVE ON THEM.
Refer to SWPM 20-
30-00 as an accept-
ed procedure.
16BACN10YR6CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep9
NAS1149V0616M
washer may have
been used in the
original configura-
tion.
16BACW10BP6PKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Remove / Keep
8-TERMINAL BOARD
LUGS
Remove / Keep
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 38 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 39

Table 1  
More DataQtyIdentificationNameActionStep
CAUTION: USE CAUTION TO AVOID DAMAGE TO THE TERMINAL LUGS.
Remove the lacing
tape or string ties of
the wire as required.
Remove the wire
from the rubber
spacers between
the wires. Hold the
terminal lug in one
hand and grab the
wire between the
lug and the first
clamp. Carefully ro-
tate the wire using
crank like twisting
motion without
stressing the lug.
After rotating the lug
180 degrees, rein-
sert the wire through
the rubber spacer
and secure it to the
terminal block. Re-
peat the process for
all the wires one at
a time that require
reorientation. Retie
the lacing tape or
string ties after rotat-
ing all the wires into
the right orientation.
Refer to SWPM 20-
10-11 as an accept-
ed procedure.
8-Terminal LugTurn10
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 39 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 40

Table 1  
More DataQtyIdentificationNameActionStep
Refer to SWPM 20-
30-00, Terminal Lug
Installation on an
Amphenol 465-8238
Terminal Board, as
an accepted proce-
dure.
*[1]
*[2]
16BACN10YR6CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)11
NAS1149V0616M
may have been
used in the original
configuration.
*[1]
16BACW10BP6PKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Install (Kept)
8-TERMINAL BOARD
LUGS
Install (Kept)
2-TERMINAL BOARD
COVER
Install (Kept)12
CAUTION: MANUALLY TORQUE WHEN INSTALLING TERMINAL BOARD COVER TO AVOID CROSS
THREADING THE SCREWS.
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
Torque to 8-10 in-lb.
4-SCREW AND WASH-
ER
Install (Kept)13
Re-route the guard
wires as shown.
4-GUARD WIRESRoute14
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 40 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 41

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
3BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)15
3NAS1149D0316JWASHER, FLATInstall (Kept)
3BACC10NA103CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
3NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Install (Kept)
3BACC10NA105CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
3NAS1149D0316JWASHER, FLATInstall (Kept)
3BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
4BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)16
4NAS1149D0316JWASHER, FLATInstall (Kept)
4BACC10NA103CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
4NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Install (Kept)
4BACC10NA106CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
4NAS1149D0316JWASHER, FLATInstall (Kept)
4BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 41 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 42

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
6BACS12GU3K9SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)17
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Install (Kept)
6BACC10JU104CLAMP, LOOP,
HINGED BAND, SILI-
CONE CUSHION
Install (Kept)
6BACC10GF32CTCLAMP, U-TYPE,
WITH OR WITHOUT
CROSSBAR, ALU-
MINUM, STEEL, OR
CRES, SILICONE CUS
Install (Kept)
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Install (Kept)
6BACN10YR3CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 42 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 43

Table 1  
More DataQtyIdentificationNameActionStep
Wet install with
sealant BMS 5-45,
Class B. Refer to
787-8 SRM 51-20-
05 Method 3 - Wet
Installation of Fas-
teners, as an accept-
ed procedure. Refer
to 787-8 SRM 51-
41-07 as an accept-
ed procedure.
6BACS12GU3K16SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)18
6BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Install (Kept)
3-CLAMPInstall (Kept)
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
1BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)19
1NAS1149D0316JWASHER, FLATInstall (Kept)
1BACC10NA103CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
1NAS42DD6-48FCSPACER, SLEEVE-
RIVET
Install (Kept)
1BACC10NA105CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
1NAS1149D0316JWASHER, FLATInstall (Kept)
1BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
*[1]  Replace these parts with newer parts as required.
*[2]  Torque each nut 200 inch-pounds to 240 inch-pounds. Refer to SWPM 20-30-00, Terminal Lug Installation on an Amphenol 465-
8238 Terminal Board, as an accepted procedure.
B787-A-24-00-0027-03A-933B-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 43 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 44

Alert Service Bulletin B787-81205-SB240027-00
Task 4 – VARIABLE FREQUENCY SIGNAL GENERATOR POWER FEEDER
CABLE TERMINAL LUGS ROTATION - LEFT WING [Group 1:]
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-24-00-0027-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Standard Wiring Practices ManualSWPM 20-30-00
Standard Wiring Practices ManualSWPM 20-10-11
Preliminary Requirements
Required Conditions
Data Module/Technical PublicationAction/Condition
B787-A-24-00-0027-00A-933A-D Issue 003Alert Service Bulletin B787-81205-SB240027-00 -
ACCOMPLISHMENT INSTRUCTIONS
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 44 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 45

Procedure
This Task applies to Group 1:
ICN-B787-A-000061-A-81205-06176-A-01-1
Figure 1  
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 45 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 46

ICN-B787-A-000061-A-81205-06177-A-01-1
Figure 2  
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 46 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 47

ICN-B787-A-000061-A-81205-06178-A-01-1
Figure 3  
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for the left side of the airplane.
Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
2BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep1
2NAS1149D0316JWASHER, FLATRemove / Keep
2BACC10NA103CLAMPRemove / Keep
2NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Remove / Keep
2BACC10NA105CLAMPRemove / Keep
2NAS1149D0316JWASHER, FLATRemove / Keep
2BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 47 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 48

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
3BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep2
3NAS1149D0316JWASHER, FLATRemove / Keep
3BACC10NA103CLAMPRemove / Keep
3NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Remove / Keep
3BACC10NA106CLAMPRemove / Keep
3NAS1149D0316JWASHER, FLATRemove / Keep
3BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
1BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep3
1NAS1149D0316JWASHER, FLATRemove / Keep
1BACC10NA103CLAMPRemove / Keep
1NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Remove / Keep
1BACC10NA104CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Remove / Keep
1NAS1149D0316JWASHER, FLATRemove / Keep
1BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 48 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 49

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
1BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep4
1NAS1149D0316JWASHER, FLATRemove / Keep
2BACC10NA103CLAMPRemove / Keep
1NAS42DD6-48FCSPACER, SLEEVE-
RIVET
Remove / Keep
1BACC10NA105CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Remove / Keep
1NAS1149D0316JWASHER, FLATRemove / Keep
1BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 49 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 50

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-41-07 as an ac-
cepted procedure.
6BACS12GU3K9SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep5
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Remove / Keep
6BACC10JU104##ALT1CLAMP, LOOP,
HINGED BAND, SILI-
CONE CUSHION
Remove / Keep
6BACC10GF32CTCLAMP, U-TYPE,
WITH OR WITHOUT
CROSSBAR, ALU-
MINUM, STEEL, OR
CRES, SILICONE CUS
Remove / Keep
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Remove / Keep
6BACN10YR3CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep
Carefully move to
access the Terminal
Lug cover.
2-GUARD WIRESMove6
Refer to 787-8 SRM
51-41-07 as an ac-
cepted procedure.
2BACS12GU3K8SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep7
2BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Remove / Keep
1-CLAMPRemove / Keep
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 50 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 51

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-41-07 as an ac-
cepted procedure.
2BACS12GU3K21SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep8
2BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Remove / Keep
1-CLAMPRemove / Keep
1-CLAMP SPACERRemove / Keep
Refer to 787-8 SRM
51-41-07 as an ac-
cepted procedure.
2BACS12GU3K27SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Remove / Keep9
2BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Remove / Keep
1-CLAMPRemove / Keep
2-CLAMP SPACERRemove / Keep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
4-SCREW AND WASH-
ER
Remove / Keep10
2-TERMINAL BOARD
COVER
Remove / Keep11
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 51 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 52

Table 1  
More DataQtyIdentificationNameActionStep
CAUTION: USE CAUTION TO PREVENT DAMAGE TO THE TERMINAL LUGS AND THE GREY COLD-
SHRINK SLEEVE ON THEM.
Refer to SWPM 20-
30-00 as an accept-
ed procedure.
16BACN10YR6CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Remove / Keep12
NAS1149V0616M
may have been
used in the original
configuration.
16BACW10BP6PKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Remove / Keep
8-TERMINAL BOARD
LUGS
Remove / Keep
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 52 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 53

Table 1  
More DataQtyIdentificationNameActionStep
Remove the lacing
tape or string ties of
the wire as required.
Remove the wire
from the rubber
spacers between
the wires. Hold the
terminal lug in one
hand and grab the
wire between the
lug and the first
clamp. Carefully ro-
tate the wire using
crank like twisting
motion without
stressing the lug.
After rotating the lug
180 degrees, rein-
sert the wire through
the rubber spacer
and secure it to the
terminal block. Re-
peat the process for
all the wires one at
a time that require
reorientation. Retie
the lacing tape or
string ties after rotat-
ing all the wires into
the right orientation.
Refer to SWPM 20-
10-11 as an accept-
ed procedure.
8-Terminal LugTurn13
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 53 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 54

Table 1  
More DataQtyIdentificationNameActionStep
CAUTION: USE CAUTION TO PREVENT DAMAGE TO THE TERMINAL LUGS AND THE GREY COLD-
SHRINK SLEEVE ON THEM.
Refer to SWPM 20-
30-00, Terminal Lug
Installation on an
Amphenol 465-8238
Terminal Board, as
an accepted proce-
dure.
*[1]
*[2]
16BACN10YR6CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)14
NAS1149V0616M
may have been
used in the original
configuration.
*[1]
16BACW10BP6PKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Install (Kept)
8-TERMINAL BOARD
LUGS
Install (Kept)
2-TERMINAL BOARD
COVER
Install (Kept)15
CAUTION: MANUALLY TORQUE WHEN INSTALLING TERMINAL BOARD COVER TO AVOID CROSS
THREADING THE SCREWS.
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
Torque to 8-10 in-lb.
4-SCREW AND WASH-
ER
Install (Kept)16
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 54 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 55

Table 1  
More DataQtyIdentificationNameActionStep
Wet install with
sealant BMS 5-45,
Class B. Refer to
787-8 SRM 51-20-
05 Method 3 - Wet
Installation of Fas-
teners, as an accept-
ed procedure. Refer
to 787-8 SRM 51-
41-07 as an accept-
ed procedure.
2BACS12GU3K27SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)17
2BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Install (Kept)
1-CLAMPInstall (Kept)
2-CLAMP SPACERInstall (Kept)
Wet install with
sealant BMS 5-45,
Class B. Refer to
787-8 SRM 51-20-
05 Method 3 - Wet
Installation of Fas-
teners, as an accept-
ed procedure. Refer
to 787-8 SRM 51-
41-07 as an accept-
ed procedure.
2BACS12GU3K21SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)18
2BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Install (Kept)
1-CLAMPInstall (Kept)
1-CLAMP SPACERInstall (Kept)
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 55 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 56

Table 1  
More DataQtyIdentificationNameActionStep
Wet install with
sealant BMS 5-45,
Class B. Refer to
787-8 SRM 51-20-
05 Method 3 - Wet
Installation of Fas-
teners, as an accept-
ed procedure. Refer
to 787-8 SRM 51-
41-07 as an accept-
ed procedure.
2BACS12GU3K8SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)19
2BACW10BX3KWASHER, PLAIN OR
COUNTERSUNK, 6AL-
4V TITANIUM ALLOY
NOMINAL AND
OVERSIZE
Install (Kept)
1-CLAMPInstall (Kept)
Re-route the guard
wires as shown.
2-GUARD WIRESRoute20
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
2BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)21
2NAS1149D0316JWASHER, FLATInstall (Kept)
2BACC10NA103CLAMPInstall (Kept)
2NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Install (Kept)
2BACC10NA105CLAMPInstall (Kept)
2NAS1149D0316JWASHER, FLATInstall (Kept)
2BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 56 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 57

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
1BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)22
1NAS1149D0316JWASHER, FLATInstall (Kept)
2BACC10NA103CLAMPInstall (Kept)
1NAS42DD6-48FCSPACER, SLEEVE-
RIVET
Install (Kept)
1BACC10NA105CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
1NAS1149D0316JWASHER, FLATInstall (Kept)
1BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 57 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 58

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
6BACS12GU3K9SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)23
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Install (Kept)
6BACC10JU104##ALT1CLAMP, LOOP,
HINGED BAND, SILI-
CONE CUSHION
Install (Kept)
6BACC10GF32CTCLAMP, U-TYPE,
WITH OR WITHOUT
CROSSBAR, ALU-
MINUM, STEEL, OR
CRES, SILICONE CUS
Install (Kept)
6BACW10BP3NPKWASHER, PLAIN AND
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL AN
Install (Kept)
6BACN10YR3CMNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
3BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)24
3NAS1149D0316JWASHER, FLATInstall (Kept)
3BACC10NA103CLAMPInstall (Kept)
3NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Install (Kept)
3BACC10NA106CLAMPInstall (Kept)
3NAS1149D0316JWASHER, FLATInstall (Kept)
3BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016Model 787
See Applicability of this data module
Page 58 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

### Page 59

Table 1  
More DataQtyIdentificationNameActionStep
Refer to 787-8 SRM
51-43-07 as an ac-
cepted procedure.
1BACS12GU3K19SCREW, HEX HEAD
WITH CROSS RE-
CESS, TITANIUM, 160
KSI
Install (Kept)25
1NAS1149D0316JWASHER, FLATInstall (Kept)
1BACC10NA103CLAMPInstall (Kept)
1NAS42DD6-32FCSPACER, SLEEVE-
RIVET
Install (Kept)
1BACC10NA104CLAMP, CUSHION,
SINGLE LEG ASSEM-
BLY, HIGH PERFOR-
MANCE PLASTIC
Install (Kept)
1BACN10YR3CDNUT, SELF-LOCKING,
REDUCED HEX, LOW
HEIGHT, A286 CRES,
450 F AND 900 F
Install (Kept)
*[1]  Replace these parts with newer parts as required.
*[2]  Torque each nut 200 inch-pounds to 240 inch-pounds. Refer to SWPM 20-30-00, Terminal Lug Installation on an Amphenol 465-
8238 Terminal Board, as an accepted procedure.
B787-A-24-00-0027-04A-933B-DApplicable To:
Issue 003, 06 Sep 2016End of data moduleModel 787
See Applicability of this data module
Page 59 of 59
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240027-00
Issue 002, 06 Sep 2016
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
