# Boeing Service Bulletin B787-81205-SB240063-00

Copy: Revision 002 ("SB-B787-81205-SB240063-00 Issue 002"), 28 pages: PDF https://openairdocs.org/files/sha256/00/48/0048c0a52b939065934d2c02f1195e9cca76966a216211fd8377d096c27e232f; text https://openairdocs.org/service-documents/boeing/b787-81205-sb240063-00/file/0048c0a52b93.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0771; AD 2018-20-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB240063-00
- Latest revision known: B787-81205-SB240063-00, Issue 002, dated June 7, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb240063-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-20-15](https://openairdocs.org/ad/2018-20-15.md), effective Nov 20, 2018: Revisions 001 and 002

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb240063-00/proposed.md).

## Text (28 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0771; AD 2018-20-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin B787-81205-SB240063-00 ELECTRICAL POWER - AC
External Power - Bus Power Control Unit and Generator Control Unit
Operational Program Software Change
Issue 002, 07 Jun 2016B787-81205-SB240063-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2015 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 and 787-9 Airplanes. Refer to Data Module SB B787-A-24-00-0063-00A-932A-D, Paragraph 1., Effectivity
for the list of affected airplanes.
B787-81205-SB240063-00TITLE PAGE
Issue 002, 07 Jun 2016
Page 1 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 2

Service Bulletin B787-81205-SB240063-00
Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B. Spares Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. Existing Data:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Data Supplied with this Service Bulletin:  . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  . . . 16
11. Publications Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . 16
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2. Industry Support Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
A. Kits/Parts:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
B. Parts and Materials Supplied by the Operator:  . . . . . . . . . . . . . . . . . . . . . . . 18
C. Parts Modified and Reidentified:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
D. Parts Removed and Not Replaced:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6. Special Tooling Necessary to do this Service Bulletin  . . . . . . . . . . . . . . . . . . . . . 20
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
B787-81205-SB240063-00TABLE OF CONTENTS
Issue 002, 07 Jun 2016
Page 2 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 3

Service Bulletin B787-81205-SB240063-00
List of Effective Data Modules
Description
Group 1-3:
Table 1  List of Effective Data Modules - Service Bulletin B787-81205-SB240063-00
Issue DateIssue StatusIssueData Module – Information Name
2016-06-07Changed002B787-A-24-00-0063-00A-00SA-D – List of Effective Data Modules
2016-06-07New001B787-A-24-00-0063-00A-931B-D – Revision Transmittal Information
2016-06-07Changed002B787-A-24-00-0063-00A-931C-D – Summary
2016-06-07Changed002B787-A-24-00-0063-00A-932A-D – PLANNING INFORMATION
2016-06-07Changed002B787-A-24-00-0063-00A-934A-D – MATERIAL INFORMATION
2016-06-07Changed002B787-A-24-00-0063-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
B787-A-24-00-0063-00A-00SA-DApplicable To:
Issue 002, 07 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 3 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 4

Service Bulletin B787-81205-SB240063-00
Revision Transmittal Information
References
TitleReference
AirplanesSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 1.A.
Description
Group 1-3:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD-2015-09-07, is related to this service
bulletin.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None.
2. REASON FOR REVISION
This issue is sent to change Group 2 concurrent requirements, add Boeing recommended compliance time,
add related FAA Airworthiness Directive information, and update software loading instructions.
These sections were changed:
1. In Planning Information, Paragraph 2., Concurrent Requirements, changed Group 2 concurrent require-
ments.
2. In Planning Information, Paragraph 3., Reason, added software change end-level-effect and reason for
revision information.
3. In Planning Information, Paragraph 4., Description, added effects of this revision information.
4. In Planning Information, Paragraph 5., Compliance, added related FAA Airworthiness Directive (AD)
information.
5. In Planning Information, Paragraph 5., Compliance, added Boeing compliance time recommendation.
6. In Planning Information, Paragraph 6., Approval, added GCU software change and related FAA AD in-
formation.
7. In Planning Information, Paragraph 11., Publications Affected, added Fault Isolation Manual.
8. In Material Information, Paragraph 3.B., Parts and Materials Supplied by the Operator, changed software
Data Load Destination nomenclature.
B787-A-24-00-0063-00A-931B-DApplicable To:
Issue 001, 07 Jun 2016Model 787
See Applicability of this data module
Page 4 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 5

9. In Accomplishment Instructions Paragraph 1., General Information, added Required for Compliance
(RC) work instruction information note.
10. In Accomplishment Instructions Paragraph 2., Work Instructions, Step A, added table to provide suggested
airplane power source information.
11. In Accomplishment Instructions Paragraph 2., Work Instructions, combined Issue 001 Table 2 and 3
into new Table 3.
12. In Accomplishment Instructions Paragraph 2., Work Instructions, combined Issue 001 Table 4 and 5
into new Table 4.
13. In Accomplishment Instructions Paragraph 2., Work Instructions, identified Step D as Required for
Compliance (RC) work instructions.
Footnotes in tables may be renumbered if footnotes are moved, added or deleted. Change marks will only
be added at locations where changes were made to the content; Footnotes that were only renumbered will
not have change marks added.
Change marks are added, except in Data Module SB B787-A-24-00-0063-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
3. REVISION HISTORY
Table 1  
December 22, 2015Issue 1:
June 07, 2016Issue 2:
B787-A-24-00-0063-00A-931B-DApplicable To:
Issue 001, 07 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 5 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 6

Service Bulletin B787-81205-SB240063-00
Summary
References
TitleReference
Concurrent RequirementsSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 2.
Spares AffectedSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 1.B.
ComplianceSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 5.
Weight and Balance ChangesSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 8.
Electrical Load DataSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 9.
Publications AffectedSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 11.
Kits/PartsSB B787-A-24-00-0063-00A-934A-D Issue 002,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-24-00-0063-00A-934A-D Issue 002,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-24-00-0063-00A-934A-D Issue 002,
Paragraph 6.
EffectivitySB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 1.
ManpowerSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 7.
Material - Price and AvailabilitySB B787-A-24-00-0063-00A-934A-D Issue 002,
Paragraph 1.
Description
Group 1-3:
1. CONCURRENT REQUIREMENTS
Refer to Data Module SB B787-A-24-00-0063-00A-932A-D, Paragraph 2., Concurrent Requirements.
B787-A-24-00-0063-00A-931C-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 6 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 7

2. BACKGROUND
Accomplishment of this service bulletin installs the new Bus Power Control Unit (BPCU) Gateway and Logic
Operational Program Software (OPS) and new Generator Control Unit (GCU) OPS software. If the BPCU
change is not done, the airplane can experience unplanned maintenance and operational disruptions. If the
GCU software change is not done, system failures could result in an in-flight-loss of electrical power.
Operators have reported in-service instances requiring hardware removal, flight delays and difficulty trou-
bleshooting problems. Investigation has revealed that Hamilton Sundstrand (UTAS) software has failed to
meet multiple requirements related to the performance and functionality of the BPCU Logic and Gateway
and GCU LSAPs.
Changing the GCU and BPCU Logic and Gateway LSAP software will improve in-service reliability and alle-
viate the requirement to perform electrical power deactivation of the airplane every 120 days per AD 2015-
09-07.
Boeing Service Related Problem (SRP) 787 24-0180 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-24-00-0063-00A-932A-
D, Paragraph 1.B., Spares Affected
NoSpares Affected
Data Module SB B787-A-24-00-0063-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
Data Module SB B787-A-24-00-0063-00A-932A-
D, Paragraph 8., Weight and Balance Changes
NoWeight and Balance Changed
Data Module SB B787-A-24-00-0063-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-24-00-0063-00A-932A-
D, Paragraph 11., Publications Affected
YesPublications Affected
Data Module SB B787-A-24-00-0063-00A-932A-
D, Paragraph 11., Publications Affected
NoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Data Module SB B787-A-24-00-0063-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
Data Module SB B787-A-24-00-0063-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-24-00-0063-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
B787-A-24-00-0063-00A-931C-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 7 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 8

3. ACTION
(CN-AC51468A)
Install the new Bus Power Control Unit (BPCU) Logic and Gateway Operational Program Software (OPS),
new Generator Control Unit (GCU) OPS software and do a software check.
4. EFFECTIVITY
787-8 and 787-9 Airplanes. Refer to Data Module SB B787-A-24-00-0063-00A-932A-D, Paragraph 1., Ef-
fectivity for the list of affected airplanes.
5. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Issue
002 of this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in
this service bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2015-09-07 is related to this service bulletin.
The effective date of AD 2015-09-07 is May 01, 2015.
Boeing recommends that the change given in this service bulletin be done within 12 months after the Issue
002 date of this service bulletin.
6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes set forth in this service bulletin.
Notwithstanding, Boeing will provide the supplier software referenced in this service bulletin at no charge.
This offer will expire eight years from the original issue date of this service bulletin.
7. MANPOWER
Refer to Data Module SB B787-A-24-00-0063-00A-932A-D, Paragraph 7., Manpower.
8. MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Data Module SB B787-A-24-00-0063-00A-934A-D, Paragraph 1., Material - Price and Availability.
B787-A-24-00-0063-00A-931C-DApplicable To:
Issue 002, 07 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 8 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 9

Service Bulletin B787-81205-SB240063-00
PLANNING INFORMATION
References
TitleReference
FUEL - Fuel Quantity Indicating System - Fuel
Quantity Management Program Software Change
SB B787-81205-SB280018-00
INTEGRATED MODULAR AVIONICS - Common
Core System - Common Interface Control Document
9.3 Software Change
SB B787-81205-SB420006-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
GENERATOR CONTROL UNIT787 AMM 24-22-02
BUS POWER CONTROL UNIT787 AMM 24-41-05
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
Description
Group 1-3:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 and 787-9 Airplanes, line numbers 6-9, 11, 20-21, 23-368,
370, 372, and 374 in 3 Groups. The Variable Numbers and Group information for the applicable airplanes
is given below. An equivalent change is on subsequent production airplanes. Refer to CN-AA51468D
for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 airplanes with different concurrent requirements than Group 2
and Group 3
-1
787-8 airplanes with different concurrent requirements than Group 1
and Group 3
-2
787-8 and 787-9 airplanes with no concurrent requirements.-3
Airplane Models: 787-8, 787-9
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 9 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 10

Table 2  
GroupVariable Number
2ZA006
1ZA100-ZA105
1ZA116-ZA124
1ZA135
2ZA136-ZA139
3ZA140-ZA143
3ZA152-ZA153
1ZA175-ZA189
2ZA195-ZA196
3ZA197-ZA201
1ZA215-ZA218
2ZA219-ZA221
3ZA222-ZA225
1ZA230-ZA231
2ZA232
1ZA233-ZA243
2ZA244-ZA247
3ZA248-ZA250
1ZA260-ZA264
2ZA265-ZA269
1ZA270-ZA275
1ZA285-ZA294
2ZA295
3ZA296
1ZA317-ZA320
2ZA321-ZA322
3ZA323-ZA324
1ZA327
2ZA334
3ZA335
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 10 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 11

Table 2  
GroupVariable Number
3ZA341-ZA342
1ZA380-ZA388
2ZA389
1ZA430-ZA435
2ZA436-ZA437
3ZA438-ZA439
1ZA445-ZA448
1ZA450-ZA453
2ZA454-ZA457
1ZA460-ZA472
2ZA473-ZA477
3ZA478-ZA484
1ZA506-ZA516
1ZA536-ZA540
2ZA541-ZA544
3ZA545
1ZA560-ZA565
2ZA566-ZA567
1ZA576-ZA578
2ZA579-ZA580
1ZA586
2ZA588-ZA590
3ZA591-ZA593
2ZA610-ZA614
3ZA615-ZA617
1ZA650-ZA651
3ZA652
1ZA655
2ZA656-ZA660
3ZA661-ZA663
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 11 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 12

Table 2  
GroupVariable Number
2ZA665-ZA666
3ZA667-ZA671
2ZA680-ZA681
3ZA682-ZA685
2ZA695
2ZA715-ZA716
3ZA718-ZA719
2ZA740
3ZA741
3ZA768-ZA769
1ZA778
2ZA779
3ZA783-ZA784
3ZA817-ZA828
3ZA839
3ZA841-ZA842
3ZA846-ZA848
3ZA853-ZA855
3ZB001-ZB006
3ZB021-ZB022
3ZB027-ZB033
3ZB077-ZB081
3ZB127-ZB132
3ZB167-ZB179
3ZB197-ZB198
3ZB224-ZB227
3ZB234-ZB235
3ZB299
3ZB362-ZB366
3ZB407-ZB413
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 12 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 13

Table 2  
GroupVariable Number
3ZB536-ZB539
3ZB558-ZB560
3ZB611-ZB612
B. Spares Affected
None.
2. Concurrent Requirements
The service bulletins listed below must be done before or at the same time as this service bulletin.
Group 1:
Table 3  
DescriptionService BulletinCompany
Fuel Quantity Indicating System - Fuel
Quantity Management Program Software
Change
SB B787-81205-SB280018-00, I001Boeing
Integrated Modular Avionics - Common Core
System - Common Interface Control Docu-
ment9.3 Software Change
SB B787-81205-SB420006-00, I003
Group 2:
Table 4  
DescriptionService BulletinCompany
Integrated Modular Avionics - Common Core
System - Common Interface Control Docu-
ment9.3 Software Change
SB B787-81205-SB420006-00, I003Boeing
Group 3:
None,
Group 1-3:
3. Reason
Accomplishment of this service bulletin installs the new Bus Power Control Unit (BPCU) Gateway and
Logic Operational Program Software (OPS) and new Generator Control Unit (GCU) OPS software. If the
BPCU change is not done, the airplane can experience unplanned maintenance and operational disruptions.
If the GCUs software change is not done, system failures could result in an in-flight-loss of electrical power.
Operators have reported in-service instances requiring hardware removal, flight delays and difficulty trou-
bleshooting problems. Investigation has revealed that Hamilton Sundstrand (UTAS) software has failed to
meet multiple requirements related to the performance and functionality of the BPCU Logic and Gateway
and GCU LSAPs.
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 13 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 14

Changing the GCU and BPCU Logic and Gateway LSAP software will improve in-service reliability and
alleviate the requirement to perform electrical power deactivation of the airplane every 120 days per AD
2015-09-07.
Boeing Service Related Problem (SRP) 787 24-0180 is related to this service bulletin.
Issue 002 is sent to change Concurrent Requirement Service Bulletin for Group 2, add Boeing recommended
compliance time, add related FAA Airworthiness Directive information, and update software loading instruc-
tions.
4. Description
Install the new Bus Power Control Unit (BPCU) Logic and Gateway Operational Program Software (OPS),
new Generator Control Unit (GCU) OPS software and do a software check.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-2:
Table 5  
Affected Maintenance Zones
ZoneModel
117, 118, 211, 212787-8
Group 3:
Table 6  
Affected Maintenance Zones
ZoneModel
117, 118, 211, 212787-8, 787-9
Group 1-3:
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Issue
2 of this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in
this service bulletin mandatory.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2015-09-07 is related to this service
bulletin. The effective date of AD 2015-09-07 is May 01, 2015.
Boeing recommends that the change given in this service bulletin be done within 12 months after Issue
002 date of this service bulletin.
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 14 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 15

Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
In addition, the Manager of the FAA Seattle Aircraft Certification Office approves the installation of the
GCU Software, part number HAM47-0720-0512, as defined in this service bulletin as an alternative method
of compliance to the requirements of paragraph (g) of AD 2015-09-07. Installation of the new GCU software
terminates the need for airline operators to electrically deactivate their airplanes every 120 days. All provisions
of AD 2015-09-07 that are not specifically referenced in the above statement remain fully applicable and
must be complied with.
7. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane . This
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour
data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
Table 7  
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.500.501Open Access
4.004.001Install and Check
Software
0.500.501Close Access
5.005.00TOTAL FOR EACH AIRPLANE
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA51468D
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 15 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 16

2. Aircraft Maintenance Manual (AMM) 787 AMM 24-22-00, 787 AMM 24-22-02, 787 AMM 24-41-
05, 787 AMM 45-13-00, 787 AMM 46-13-00
3. Boeing Service Bulletin (SB) SB B787-81205-SB280018-00, SB B787-81205-SB420006-00
4. Boeing Service Letter 787-SL-00-003
5. Boeing Service Related Problem (SRP) 787 24-0180
6. Federal Aviation Administration (FAA) Airworthiness Directive (AD) AD 2015-09-07
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 8  
Chapter-SectionPublication
46-12787 Illustrated Parts Data
24-00787 Fault Isolation Manual
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
13. Software Accomplishment Summary
1. Systems affected by this change:
2. Software changes which affect operational procedures:
3. Other software improvements:
GCU - Reduce nuisance ELEC GEN SYS condition (Low Oil Pressure) caused during in-flight engine
shutdown. Incorporates an indication change to add an inhibit when in Air Mode for the ELEC GEN
SYS (LOP), used for precluding the ELEC GEN SYS Status EICAS Messages during some engine
shutdown cases.
GCU - Implement New GCU BITE Requirements for VFSG/ASG Open Diode Protection. Incorporates
a BITE fault monitor for the VFSG/ASG Open Diode Protection in the GCU.
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 16 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 17

GCU - Revising LVPS monitors to include a software filter to reduce failsafes due to sampling noise.
GCU - Correction for Loss of Sense trip during generator operational test (engine start). Incorporates
a protections change to reduce nuisance trips in the GCU by changing the GEC3 contactor close delay
timing along with revised logic with GEC3 aux status and GEC3 Close Command.
GCU - Low Oil Pressure improved monitor timing During Engine Start. Incorporates an indication change
to reduce nuisance LOP indications by additional delay a from the point of the engine speed passing
the under speed threshold until a LOP EICAS message is issued.
GCU - Correction for GCU limited to running continuously for 248.55 days before auto-failsafe. Incor-
porates a software change to add a counter independent of the background life counter. The independent
counter is used to reset the GCU DSP during initialization.[AD 2015-09-07].
GCU - Enhanced VFSG failure detection with DC Link Undervoltage (Loss of total PMG detection).
Incorporates a protections change to add DC Link Undervoltage logic for PMG failure detection.
BPCU & GCU - Added detection of Single Event Upset (SEU) caused stale data condition on BPCU/GCU
PP DSP. Incorporates a software change in the PP DSP to implement a refresh counter for the ADC
function that will failsafe the unit if a Single Event Latch Up causes stale data from the DSP.
GCU - Ring Bus Tie Breaker (BTB) Fail To Open (FTO) BITE messages in the field. Incorporates a
change to the BITE Fault detection and logic for the Ring BTB FTO to reduce unnecessary removals
of GCUs.
GCU - HVDC Ripple Voltage Protection - Additional Logic to Detect Ripple Below 200Hz which has
been seen in some cases of weak external power sources. Incorporates a protections change to trigger
a Ripple Protection for HVDC ripple that occurs with low frequencies.
BPCU - Improved ELCU Fail to Close (FTC) Contactor Trips. Incorporates a protections change to the
BPCU's ELCU coordination logic and protection logic associated with the 'yellow box' single line con-
tactors to reduce aircraft delays due to trip resets or main battery depletion.
BPCU - Reduce BPCU Gateway failsafe events. Incorporates a software change in the Cold Reset
function of the BPCU Gateway that will eliminate the possibility of a nuisance failsafe event where one
RAM Parity event is counted as two separate events.
GCU - Reduce ASG channel failures during APU start. Incorporates a change to allow operational tests
to finish if the tests are started on ground and a transition to air occurs.
GCU - ATRUC Fail to Open (FTO) Update to Protection and BITE. Incorporates a protections change
to implement a monitor (the FTO condition is set for 3 cycles) before issuing the ELEC HVDC SYS
EICAS message in an attempt to avoid nuisance annunciations. The BITE monitor is updated to ensure
proper isolation logic is made.
BPCU - Improved BITE Fault Report for 28Vdc Bus Low Voltage Condition. Incorporates changes to
BITE CBIT Fault Monitors to generate Maintenance Message correlated with ELEC 28 VDC BUS
EICAS message.
B787-A-24-00-0063-00A-932A-DApplicable To:
Issue 002, 07 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 17 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 18

Service Bulletin B787-81205-SB240063-00
MATERIAL INFORMATION
References
TitleReference
ReferencesSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 10.
Description
Group 1-3:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane.
1. For Boeing provided Loadable Software (LSW) part numbers, order the LSW part number as follows:
Reference this service bulletin and submit your purchase order by one of these methods.
A. Order on-line via ATA Spec 2000 or The Boeing PART Page
B. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION.
2. For Supplier provided Loadable Software (LSW) part numbers, order the LSW part number from the
supplier.
Operators must order each instance of the Loadable Software (LSW) part numbers in Table 1 - Loadable
Software Attributes as shown in Paragraph 3.B., Parts and Materials Supplied by the Operator. The LSW
provider information is available in the Notes column of the Loadable Software Attributes Table.
2. Industry Support Information
Boeing warranty remedies are not available for the configuration changes set forth in this service bulletin.
Notwithstanding, Boeing will provide the supplier software referenced in this service bulletin at no charge.
This offer will expire eight years from the original issue date of this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
To get the parts/materials shown below, refer to Paragraph 1., Material - Price and Availability.
B787-A-24-00-0063-00A-934A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 18 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 19

Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4] *[5]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS1185146CIS MS FSM
MSD-1
HAM40-0720-
0504
*[1] *[2] *[3] *[4] *[5]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS1765187CIS MS FSM
MSD-2
HAM40-0720-
0504
*[1] *[2] *[3] *[5]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS356189424 BPCU LOG-
IC-R
HAM40-0720-
0504
*[1] *[2] *[3] *[5]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS367193124 BPCU LOG-
IC-L
HAM40-0720-
0504
*[1] *[2] *[4] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS1185146CIS MS FSM
MSD-1
HAM47-0720-
0512
*[1] *[2] *[4] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS1765187CIS MS FSM
MSD-2
HAM47-0720-
0512
*[1] *[2] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS223477524 GCU-L1HAM47-0720-
0512
*[1] *[2] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS244487424 GCU-L2HAM47-0720-
0512
*[1] *[2] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS246499024 AGCU-LHAM47-0720-
0512
*[1] *[2] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS268498824 GCU-R2HAM47-0720-
0512
*[1] *[2] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS273493924 GCU-R1HAM47-0720-
0512
*[1] *[2] *[6] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS284501424 AGCU-RHAM47-0720-
0512
B787-A-24-00-0063-00A-934A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 19 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 20

Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[4] *[7] *[8]
*[5]
24 BPCU
GATEWAY OPS
Electrical Power
Generation and
Start System
LS1185146CIS MS FSM
MSD-1
HAM4C-0720-
0508
*[1] *[2] *[4] *[7] *[8]
*[5]
24 BPCU
GATEWAY OPS
Electrical Power
Generation and
Start System
LS1765187CIS MS FSM
MSD-2
HAM4C-0720-
0508
*[1] *[2] *[7] *[8] *[5]24 BPCU
GATEWAY OPS
Electrical Power
Generation and
Start System
LS236448124 BPCU-RHAM4C-0720-
0508
*[1] *[2] *[7] *[8] *[5]24 BPCU
GATEWAY OPS
Electrical Power
Generation and
Start System
LS299442424 BPCU-LHAM4C-0720-
0508
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software part number.
*[3]  The existing software part number is HAM44-0710-1676.
*[4]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
*[5]  Boeing provided loadable software.
*[6]  The existing software part number is HAM40-0710-1672.
*[7]  The existing software part number is HAM4D-0710-1619.
*[8]  Reference part number HAM4C0720-0508 for ordering purposes.
C. Parts Modified and Reidentified:
None.
D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-24-00-0063-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-24-00-0063-00A-934A-DApplicable To:
Issue 002, 07 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 20 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 21

Service Bulletin B787-81205-SB240063-00
ACCOMPLISHMENT INSTRUCTIONS
References
TitleReference
ReferencesSB B787-A-24-00-0063-00A-932A-D Issue 002,
Paragraph 10.
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
BUS POWER CONTROL UNIT787 AMM 24-41-05
GENERATOR CONTROL UNIT787 AMM 24-22-02
Procedure
Group 1-3:
1. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTI-
CLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, METAL
PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE
TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER
ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-24-00-0063-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 21 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 22

– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
4. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
5. Refer to 787 AMM 45-13-00 as an accepted procedure for the Onboard Data Load Function
(ODLF) and the software check.
6. Refer to 787 AMM 46-13-00 as an accepted procedure to stage software on a Mass Storage
Device (MSD).
7. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
8. This service bulletin includes functional test procedures for the systems changed by this service
bulletin. More functional tests can possibly be necessary in accordance with standard mainte-
nance practices because of interruption to other airplane systems.
9. Some steps in the Work Instructions are labeled as Required for Compliance (RC). If this service
bulletin is mandated by an Airworthiness Directive (AD), then the steps labeled as RC, including
sub-steps under an RC step and any figures identified in an RC step, must be done to comply
with the AD. An Alternative Method of Compliance (AMOC) is required for any deviations to RC
steps, including sub-steps and identified figures. Steps not labeled as RC may be deviated from
using accepted methods in accordance with the operator's maintenance or inspection program
without obtaining approval of an AMOC. This is provided that the RC steps, including sub-steps
and identified figures, can still be done as specified, and the airplane can be put back in an air-
worthy condition.
2. WORK INSTRUCTIONS
A. Verify airplane has stable electrical power (two 90 KVA stingers preferred for Generator Control Unit
(GCU) that will not be interrupted during software installation. Refer to 787 AMM 24-22-00 as an accepted
procedure to supply electrical power to the airplane. For Bus Power Control Unit (BPCU), refer to 787
AMM 24-41-05 as an accepted procedure. Software installation of the BPCU-L and BPCU-R can be
accomplished during APU operation. Alternatively, one 90 KVA stinger can be used (left only), however,
only the BPCU-R can be loaded in this configuration. Using external power, it is necessary to swap the
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 22 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 23

BPCU-L and BPCU-R hardware for software installation on both. Refer to Table 1 for preferred and al-
ternate airplane power sources for software loading steps.
Table 1  
Loading StepAlternate Airplane Power
Source
Preferred Airplane Power
Source
Load Destination
2.B.APUExternal PowerCIS MS FSM MSD-1
2.B.APUExternal PowerCIS MS FSM MSD-2
2.C.(1)External power if loaded
in R-BPCU position then
card swapped with L-
BPCU position
APU24 BPCU-L
2.C.(1)External power if loaded
in R-BPCU position then
card swapped with L-
BPCU position
APU24 BPCU LOGIC-L
2.C.(2)Left External PowerAPU24 BPCU-R
2.C.(2)Left External PowerAPU24 BPCU LOGIC-R
2.D.(1)APUExternal Power24 GCU-R1
2.D.(2)APUExternal Power24 GCU-R2
2.D.(3)No alternateExternal Power24 AGCU-L
2.D.(4)No alternateExternal Power24 AGCU-R
2.D.(5)APUExternal Power24 GCU-L1
2.D.(6)APUExternal Power24 GCU-L2
B. Install the new software on the Mass Storage Device (MSD). Reference the following Loadable Software
Attributes Table. Refer to 787 AMM 46-13-00 as an accepted procedure.
NOTE: It is not a Boeing or FAA/regulatory requirement to load and maintain (i.e. maintain in a specific
configuration) the onboard Loadable Software Airplane Parts (LSAPs) on the B787 mass storage
devices. The Mass Storage Devices (MSD) are available only as a convenience to the operator.
This Step and AMM procedure for loading software on the MSD(s) is provided for reference
only. The operators can use their own procedure to stage the software on the MSD(s). Boeing
recommends that operators maintain the latest software on the MSD(s) so that it is available if
the software maintenance should become necessary, such as due to an unplanned component
change. Refer to Boeing Service Letter 787-SL-00-003 for more information. 
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 23 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 24

Table 2  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS1185146CIS MS FSM
MSD-1
HAM40-0720-
0504
*[1] *[2] *[3] *[4]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS1765187CIS MS FSM
MSD-2
HAM40-0720-
0504
*[1] *[2] *[4] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS1185146CIS MS FSM
MSD-1
HAM47-0720-
0512
*[1] *[2] *[4] *[5]24 GCU OPSElectrical Power
Generation and
Start System
LS1765187CIS MS FSM
MSD-2
HAM47-0720-
0512
*[1] *[2] *[4] *[6]24 BPCU GATE-
WAY OPS
Electrical Power
Generation and
Start System
LS1185146CIS MS FSM
MSD-1
HAM4C-0720-
0508
*[1] *[2] *[4] *[6]24 BPCU GATE-
WAY OPS
Electrical Power
Generation and
Start System
LS1765187CIS MS FSM
MSD-2
HAM4C-0720-
0508
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software part number.
*[3]  The existing software part number is HAM44-0710-1676.
*[4]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
*[5]  The existing software part number is HAM40-0710-1672.
*[6]  The existing software part number is HAM4D-0710-1619.
C. Install each instance of the BPCU Logic OPS and BPCU Gateway OPS software on the Bus Power
Control Unit (BPCU) cards. Refer to 787 AMM 24-41-05, Bus Power Control Unit - Software Installation
as an accepted procedure.
NOTE: Software cannot be loaded to L-BPCU when airplane is powered from External Power (EP)
because core-net will become unpowered during the BPCU software load. The only way to load
the L-BPCU software using EP is if the L-BPCU card is loaded when installed in the R-BPCU
position and airplane powered from L-EP. This will allow core-net to remain powered during the
software load. The Left and Right BPCUs can be swapped to allow the second BPCU to be
loaded in the R-BPCU position. 
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 24 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 25

(1) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 3  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS356189424 BPCU LOG-
IC-L
HAM40-0720-
0504
*[1] *[2] *[3] *[5]24 BPCU GATE-
WAY OPS
Electrical Power
Generation and
Start System
LS299442424 BPCU-LHAM4C-0720-
0508
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All BPCU cards must contain the new software.
*[4]  The existing software part number is HAM44-0710-1676.
*[5]  The existing software part number is HAM4D-0710-1619.
(2) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 4  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 BPCU LOGIC
OPS
Electrical Power
Generation and
Start System
LS367193124 BPCU LOG-
IC-R
HAM40-0720-
0504
*[1] *[2] *[3] *[5]24 BPCU GATE-
WAY OPS
Electrical Power
Generation and
Start System
LS236448124 BPCU-RHAM4C-0720-
0508
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All BPCU cards must contain the new software.
*[4]  The existing software part number is HAM4D-0710-1676.
*[5]  The existing software part number is HAM44-0710-1619.
(3) Do a software check. If the software check fails, do corrective actions, repeat the software check,
and do applicable corrective actions until the software check passes. Refer to 787 AMM 45-13-00,
Onboard Data Load Function - Software Installation as an accepted procedure.
D. RC - Install each instance of the GCU OPS Software using the Onboard Data Load Function (ODLF).
Refer to 787 AMM 24-22-02 as an accepted procedure.
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 25 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 26

(1) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 5  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 GCU OPSElectrical Power
Generation and
Start System
LS273493924 GCU-R1HAM47-0720-
0512
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All GCUs must contain the new software.
*[4]  The existing software part number is HAM40-0710-1672.
(2) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 6  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 GCU OPSElectrical Power
Generation and
Start System
LS268498824 GCU-R2HAM47-0720-
0512
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All GCUs must contain the new software.
*[4]  The existing software part number is HAM40-0710-1672.
(3) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 7  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 GCU OPSElectrical Power
Generation and
Start System
LS246499024 AGCU-LHAM47-0720-
0512
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All GCUs must contain the new software.
*[4]  The existing software part number is HAM40-0710-1672.
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 26 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 27

(4) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 8  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 GCU OPSElectrical Power
Generation and
Start System
LS284501424 AGCU-RHAM47-0720-
0512
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All GCUs must contain the new software.
*[4]  The existing software part number is HAM40-0710-1672.
(5) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 9  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 GCU OPSElectrical Power
Generation and
Start System
LS223477524 GCU-L1HAM47-0720-
0512
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All GCUs must contain the new software.
*[4]  The existing software part number is HAM40-0710-1672.
(6) Install each instance of the Loadable Software (LSW) listed in the following Loadable Software At-
tributes Table.
Table 10  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]24 GCU OPSElectrical Power
Generation and
Start System
LS244487424 GCU-L2HAM47-0720-
0512
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane. All GCUs must contain the new software.
*[4]  The existing software part number is HAM40-0710-1672.
(7) Do a software check. If the software check fails, do corrective actions, repeat the software check,
and do applicable corrective actions until the software check passes. Refer to 787 AMM 45-13-00,
Onboard Data Load Function - Software Installation as an accepted procedure.
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016Model 787
See Applicability of this data module
Page 27 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 28

E. Cycle the airplane power.
(1) Remove electrical power from the airplane. Refer to 787 AMM 24-22-02 as an accepted procedure.
(2) Supply electrical power to the airplane. Refer to 787 AMM 24-22-02 as an accepted procedure.
F. Put the airplane back to a serviceable condition.
B787-A-24-00-0063-00A-933A-DApplicable To:
Issue 002, 07 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 28 of 28
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB240063-00
Issue 002, 07 Jun 2016
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
