# Boeing Service Bulletin B787-81205-SB250054-00

Copy: Revision 001 ("SB B787-81205-SB250054-00 Issue 001"), 27 pages: PDF https://openairdocs.org/files/sha256/ed/c8/edc85d2827469b85836f206656169863ea950b3da0eff97d0c284da86fe9230c; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250054-00/file/edc85d282746.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-3992; AD 2016-19-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB250054-00
- Latest revision known: B787-81205-SB250054-00, Issue 001, dated December 19, 2014 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb250054-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-19-04](https://openairdocs.org/ad/2016-19-04.md), effective Oct 31, 2016: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb250054-00/proposed.md).

## Text (27 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-3992; AD 2016-19-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Service Bulletin B787-81205-SB250054-00 EQUIPMENT AND
FURNISHINGS - Flight Compartment Seats - Captain and First Officer Seat
Assembly Test and Replacement
Issue 001, 19 Dec 2014B787-81205-SB250054-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 Airplanes. Refer to Data Module SB B787-A-25-00-0054-00A-932A-D, Paragraph 1., Effectivity for the
list of affected airplanes.
B787-81205-SB250054-00TITLE PAGE
Issue 001, 19 Dec 2014
Page 1 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
6.0
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 2

Alert Service Bulletin B787-81205-SB250054-00
Table of Contents
Page
Summary  .....................................................5
PLANNING INFORMATION  ..........................................9
1. Effectivity  .............................................9
A. Airplanes  ............................................9
B. Spares Affected  ........................................1 0
2. Concurrent Requirements  ....................................1 0
3. Reason  ..............................................1 1
4. Description  ............................................1 1
5. Compliance  ...........................................1 1
6. Approval  .............................................1 4
7. Manpower  ............................................1 4
8. Weight and Balance Changes  .................................1 5
9. Electrical Load Data  .......................................1 5
10. References  ...........................................1 5
A. Existing Data:  .........................................1 5
B. Data Supplied with this Service Bulletin:  ..........................1 5
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  ...1 5
11. Publications Affected  ......................................1 5
12. Interchangeability and Intermixability of Parts  .........................1 5
13. Software Accomplishment Summary  ..............................1 6
MATERIAL INFORMATION  ..........................................1 7
1. Material - Price and Availability  .................................1 7
2. Industry Support Information  ..................................1 7
3. Parts Necessary for Each Airplane  ...............................1 7
A. Kits/Parts:  ...........................................1 7
B. Parts and Materials Supplied by the Operator:  .......................1 7
C. Parts Modified and Reidentified:  ...............................1 8
D. Parts Removed and Not Replaced:  .............................1 8
4. Parts Necessary to Change Spares  ..............................1 8
5. Special Tooling - Price and Availability  .............................1 8
6. Special Tooling Necessary to do this Service Bulletin  .....................1 8
ACCOMPLISHMENT INSTRUCTIONS  ...................................1 9
1. GENERAL INFORMATION  ...................................1 9
2. WORK INSTRUCTIONS  ....................................2 0
Appendix A – CAPTAIN AND FIRST OFFICER SEAT ASSEMBLY TEST [Group 1:] ............2 3
B787-81205-SB250054-00TABLE OF CONTENTS
Issue 001, 19 Dec 2014
Page 2 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 3

Alert Service Bulletin B787-81205-SB250054-00
List of Illustrations
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-25-00-0054-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Description
Group 1:
Table 1  List of Illustrations - Alert Service Bulletin B787-81205-SB250054-00
Used InICN
B787-A-25-00-0054-00A-931C-D Issue 001ICN-B787-A-000061-A-81205-08859-A-01-1
B787-A-25-00-0054-0AA-931D-D Issue 001ICN-B787-A-000061-A-81205-08860-A-01-1
B787-A-25-00-0054-0AA-931D-D Issue 001ICN-B787-A-000061-A-81205-08861-A-01-1
B787-A-25-00-0054-0AA-931D-D Issue 001ICN-B787-A-000061-A-81205-08862-A-01-1
B787-A-25-00-0054-00A-00AA-DApplicable To:
Issue 001, 19 Dec 2014End of data moduleModel 787
See Applicability of this data module
Page 3 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 4

Alert Service Bulletin B787-81205-SB250054-00
List of Effective Data Modules
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-25-00-0054-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Description
Group 1:
Table 1  List of Effective Data Modules - Alert Service Bulletin B787-81205-SB250054-00
Issue DateIssue StatusIssueData Module – Information Name
2014-12-19New001B787-A-25-00-0054-00A-00AA-D – List of Illustrations
2014-12-19New001B787-A-25-00-0054-00A-00SA-D – List of Effective Data Modules
2014-12-19New001B787-A-25-00-0054-00A-931C-D – Summary
2014-12-19New001B787-A-25-00-0054-00A-932A-D – PLANNING INFORMATION
2014-12-19New001B787-A-25-00-0054-00A-934A-D – MATERIAL INFORMATION
2014-12-19New001B787-A-25-00-0054-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
2014-12-19New001B787-A-25-00-0054-0AA-931D-D – Appendix A – CAPTAIN AND FIRST
OFFICER SEAT ASSEMBLY TEST [Group 1:]
B787-A-25-00-0054-00A-00SA-DApplicable To:
Issue 001, 19 Dec 2014End of data moduleModel 787
See Applicability of this data module
Page 4 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 5

Alert Service Bulletin B787-81205-SB250054-00
Summary
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-25-00-0054-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
Spares AffectedSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 1.B.
ComplianceSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 5.
Weight and Balance ChangesSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 8.
Electrical Load DataSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 9.
Publications AffectedSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 11.
Kits/PartsSB B787-A-25-00-0054-00A-934A-D Issue 001,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-25-00-0054-00A-934A-D Issue 001,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-25-00-0054-00A-934A-D Issue 001,
Paragraph 6.
EffectivitySB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 1.
ManpowerSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 7.
Material - Price and AvailabilitySB B787-A-25-00-0054-00A-934A-D Issue 001,
Paragraph 1.
B787-A-25-00-0054-00A-931C-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 5 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 6

Description
Group 1:
1. CONCURRENT REQUIREMENTS
None.
2. BACKGROUND
This service bulletin gives instructions to replace the Captain and First Officer seat assembly and do a test
of the Captain and First Officer seat assembly as an interim action to prevent seat actuator clutch failure
resulting in loss of seat locking and un-commanded motion. If this service bulletin is not incorporated, the
Captain and First Officer seats may move un-commanded during operation which could lead to reduced
controllability of the airplane.
An operator reported that a Captain's seat moved un-commanded during landing rollout due to a failure in
the seat horizontal actuator. Investigation found press fit clutch pins in the actuator could migrate loose
when subjected to repeated dynamic impact loading from clutch re-engagement when the manual horizontal
control lever is released with the seat still moving on the tracks. The clutch pins can migrate loose, overturn,
and force clutch plate separation, resulting in degraded or failed seat locking. The new Captain and First
Officer seat assemblies installed by this service bulletin include new horizontal and vertical actuators which
incorporate design changes to the clutch mechanism to improve pin retention and prevent loss of locking
due to pin migration. This service bulletin also includes instructions to perform interim tests of Captain and
First Officer seat actuator clutch operation to prevent loss of seat locking and un-commanded motion prior
to installation of new Captain and First Officer seat assemblies incorporating the new actuators.
Boeing Service Related Problem (SRP) 787 SRP-25-0332 is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-25-00-0054-00A-932A-
D, Paragraph 1.B., Spares Affected
NoSpares Affected
Data Module SB B787-A-25-00-0054-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
Data Module SB B787-A-25-00-0054-00A-932A-
D, Paragraph 8., Weight and Balance Changes
NoWeight and Balance Changed
Data Module SB B787-A-25-00-0054-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-25-00-0054-00A-932A-
D, Paragraph 11., Publications Affected
YesPublications Affected
Data Module SB B787-A-25-00-0054-00A-932A-
D, Paragraph 11., Publications Affected
NoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Data Module SB B787-A-25-00-0054-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
B787-A-25-00-0054-00A-931C-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 6 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 7

Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-25-00-0054-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-25-00-0054-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
3. ACTION
(CN-AA46352D)
In the Flight Compartment, replace the Captain and First Officer Seat Assembly as a terminating action.
As an interim action, do a test of the Captain and First Officer Seat Assembly and replace the seat horizontal
or vertical actuator if necessary.
4. EFFECTIVITY
787-8 Airplanes. Refer to Data Module SB B787-A-25-00-0054-00A-932A-D, Paragraph 1., Effectivity for
the list of affected airplanes.
5. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Refer to Data Module SB B787-A-25-00-0054-00A-932A-D, Paragraph 5., Compliance
6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
7. MANPOWER
Refer to Data Module SB B787-A-25-00-0054-00A-932A-D, Paragraph 7., Manpower.
8. MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Data Module SB B787-A-25-00-0054-00A-934A-D, Paragraph 1., Material - Price and Availability.
B787-A-25-00-0054-00A-931C-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 7 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 8 (OCR)

@ BOEING  B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN
IN THE FLIGHT COMPARTMENT, REPLACE THE CAPTAIN AND
FIRST OFFICER SEAT ASSEMBLY AS A TERMINATING ACTION.
AS AN INTERIM ACTION, DO A TEST OF THE CAPTAIN AND
FIRST OFFICER SEAT ASSEMBLY AND REPLACE THE SEAT
HORIZONTAL OR VERTICAL ACTUATOR IF NECESSARY.
FLIGHT COMPARTMENT
ICN-B787-A-000061-A-81205-08859-A-01-1
Figure 1
Applicable To:  B787-A-25-00-0054-00A-931C-D
Model 787  End of data module  Issue 001, 19 Dec 2014
See Applicability of this data module
Page 8 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 9

Alert Service Bulletin B787-81205-SB250054-00
PLANNING INFORMATION
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN PARAGRAPH 1., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED
Alert:
OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES
HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
References
TitleReference
Work InstructionsSB B787-A-25-00-0054-00A-933A-D Issue 001, Step 2.
CAPTAIN AND FIRST OFFICER SEAT787 AMM 25-11-01
Description
Group 1:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 Airplanes, line numbers 6-9, 11, 20-21, 23-125, 127-132,
134-138, 140-145, 147-168, 170-180, 182-201 and 203-209 in one Group. The Variable Numbers and
Group information for the applicable airplanes is given below. An equivalent change is on subsequent
production airplanes. Refer to CN-AA46352 for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 airplanes with Ipeco Captain and First Officer seats (Part
Number 3A380-0007-01-6, 3A380-0008-01-6).
-1
Airplane Models: 787-8
Table 2  
GroupVariable Number
1ZA006
1ZA100-ZA105
1ZA116-ZA124
1ZA135-ZA139
1ZA175-ZA189
1ZA215-ZA221
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 9 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 10

Table 2  
GroupVariable Number
1ZA230-ZA246
1ZA260-ZA268
1ZA270-ZA275
1ZA285-ZA295
1ZA317-ZA322
1ZA327
1ZA334
1ZA380-ZA389
1ZA430-ZA437
1ZA445-ZA448
1ZA450-ZA457
1ZA460-ZA475
1ZA506-ZA516
1ZA536-ZA543
1ZA560-ZA565
1ZA576-ZA580
1ZA586
1ZA588-ZA589
1ZA610-ZA612
1ZA650-ZA651
1ZA655-ZA658
1ZA680
1ZA695
1ZA778-ZA779
1ZA841
B. Spares Affected
None.
2. Concurrent Requirements
None.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 10 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 11

3. Reason
This service bulletin gives instructions to replace the Captain and First Officer seat assembly and do a test
of the Captain and First Officer seat assembly as an interim action to prevent seat actuator clutch failure
resulting in loss of seat locking and un-commanded motion. If this service bulletin is not incorporated, the
Captain and First Officer seats may move un-commanded during operation which could lead to reduced
controllability of the airplane.
An operator reported that a Captain's seat moved un-commanded during landing rollout due to a failure in
the seat horizontal actuator. Investigation found press fit clutch pins in the actuator could migrate loose
when subjected to repeated dynamic impact loading from clutch re-engagement when the manual horizontal
control lever is released with the seat still moving on the tracks. The clutch pins can migrate loose, overturn,
and force clutch plate separation, resulting in degraded or failed seat locking. The new Captain and First
Officer seat assemblies installed by this service bulletin include new horizontal and vertical actuators which
incorporate design changes to the clutch mechanism to improve pin retention and prevent loss of locking
due to pin migration. This service bulletin also includes instructions to perform interim tests of Captain and
First Officer seat actuator clutch operation to prevent loss of seat locking and un-commanded motion prior
to installation of new Captain and First Officer seat assemblies incorporating the new actuators.
Boeing Service Related Problem (SRP) 787 SRP-25-0332 is related to this service bulletin.
4. Description
In the Flight Compartment, replace the Captain and First Officer Seat Assembly as a terminating action.
As an interim action, do a test of the Captain and First Officer Seat Assembly and replace the seat horizontal
or vertical actuator if necessary.
The work in this service bulletin is done in the maintenance zone(s) given below.
Table 3  
Affected Maintenance Zones
ZoneModel
211, 212787-8
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Do the required actions in accordance with Data Module SB B787-A-25-00-0054-00A-933A-D, Step 2.,
Work Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 11 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 12

Table 4  INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 1000 flight hours
after the Issue 001 date of
this service bulletin.
Do PART 1: INTERIM
ACTION: CAPTAIN SEAT
ASSEMBLY TEST*[1]
All airplanes
1000 flight hours*[2]-OPTION 1: Repeat PART1: INTERIM ACTION:
CAPTAIN SEAT ASSEM-
BLY TEST
CONDITION 1: NORMAL
CLUTCH ENGAGING
FOUND
--OPTION 2: Do PART 3:
TERMINATING ACTION:
CAPTAIN SEAT ASSEM-
BLY REPLACEMENT*[2]
-Before further flight.OPTION 3 (ACTION 1):
Do PART 2: CAPTAIN
SEAT HORIZONTAL OR
VERTICAL ACTUATOR
REPLACEMENT
CONDITION 2: NON-
NORMAL CLUTCH EN-
GAGING FOUND
1000 flight hours*[2]-OPTION 3 (ACTION 2):Repeat PART 1: INTERIM
ACTION: CAPTAIN SEAT
ASSEMBLY TEST
--OPTION 4: Do PART 3:
TERMINATING ACTION:
CAPTAIN SEAT ASSEM-
BLY REPLACEMENT
*[1]  Accomplishment of PART 3: TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY REPLACEMENT can be done instead of PART
1: INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST.
*[2]  Accomplishment of PART 3: TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY REPLACEMENT is terminating action to the repeat
test in PART 1.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 12 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 13

Table 5  INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 1000 flight hours
after the Issue 001 date of
this service bulletin.
Do PART 4: INTERIM
ACTION: FIRST OFFICER
SEAT ASSEMBLY
TEST*[1]
All airplanes
1000 flight hours*[2]-OPTION 5: Repeat PART4: INTERIM ACTION:
FIRST OFFICER SEAT
ASSEMBLY TEST
CONDITION 1: NORMAL
CLUTCH ENGAGING
FOUND
--OPTION 6: Do PART 6:
TERMINATING ACTION:
FIRST OFFICER SEAT
ASSEMBLY REPLACE-
MENT*[2]
-Before further flight.OPTION 7 (ACTION 1):
Do PART 5: FIRST OFFI-
CER SEAT HORIZONTAL
OR VERTICAL ACTUA-
TOR REPLACEMENT
CONDITION 2: NON-
NORMAL CLUTCH EN-
GAGING FOUND
1000 flight hours*[2]-OPTION 7 (ACTION 2):Repeat PART 4: INTERIM
ACTION: FIRST OFFICER
SEAT ASSEMBLY TEST
--OPTION 8: Do PART 6:
TERMINATING ACTION :
FIRST OFFICER SEAT
ASSEMBLY REPLACE-
MENT
*[1]  Accomplishment of PART 6: TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY REPLACEMENT can be done instead of
PART 4: INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST.
*[2]  Accomplishment of PART 6: TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY REPLACEMENT is terminating action to
the repeat test in PART 4.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 13 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 14

Table 6  TERMINATING ACTION: CAPTAIN AND FIRST OFFICER SEAT ASSEMBLY REPLACEMENT
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 72 months after the
Issue 001 date of this ser-
vice bulletin.
Do PART 3: TERMINAT-
ING ACTION: CAPTAIN
SEAT ASSEMBLY RE-
PLACEMENT
All airplanes
-Within 72 months after the
Issue 001 date of this ser-
vice bulletin.
Do PART 6: TERMINAT-
ING ACTION: FIRST OF-
FICER SEAT ASSEMBLY
REPLACEMENT
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
7. Manpower
Table 7  INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.750.751Part 1
*[1]*[1]*[1]Part 2
0.750.75TOTAL FOR EACH AIRPLANE
*[1]  No time provided for this task. Refer to Ipeco Service Bulletin 380-25-04.
Table 8  INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.750.751Part 4
*[1]*[1]*[1]Part 5
0.750.75TOTAL FOR EACH AIRPLANE
*[1]  No time provided for this task. Refer to Ipeco Service Bulletin 380-25-04.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 14 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 15

Table 9  TERMINATING ACTION: CAPTAIN AND FIRST OFFICER SEAT 
ASSEMBLY REPLACEMENT
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.751.502Part 3
0.751.502Part 6
1.503.00TOTAL FOR EACH AIRPLANE
The time to make the change to the in accordance with Ipeco Service Bulletin 380-25-04 is not included.
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA46352D
2. Aircraft Maintenance Manual (AMM) 787 AMM 25-11-01
3. Boeing Service Related Problem (SRP) 787 SRP-25-0332
4. Ipeco Service Bulletin 380-25-04
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 10  
Chapter-SectionPublication
ZA2-11787 Illustrated Parts Data
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 15 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 16

13. Software Accomplishment Summary
Not Affected.
B787-A-25-00-0054-00A-932A-DApplicable To:
Issue 001, 19 Dec 2014End of data moduleModel 787
See Applicability of this data module
Page 16 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 17

Alert Service Bulletin B787-81205-SB250054-00
MATERIAL INFORMATION
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-25-00-0054-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 10.
Description
Group 1:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane
. Refer to Ipeco Service Bulletin 380-25-04.
2. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
Table 1  
NotesExisting Part NumberNameQTYPart Number /
Specification
*[1] *[2]3A380-0007-01-6Captain Seat Assembly13A380-0007-01-7
*[1] *[2]3A380-0008-01-6First Officer Seat Assembly13A380-0008-01-7
*[1]  New part or make a change to the existing part in accordance with Ipeco Service Bulletin 380-25-04
*[2]  Refer to Ipeco Service Bulletin 380-25-04 for instructions to return the existing parts for modification and to get new part.
B787-A-25-00-0054-00A-934A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 17 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 18

C. Parts Modified and Reidentified:
Table 2  
NotesNew Part NumberNameQTYExisting Part
Number
*[1]3A380-0007-01-7Captain Seat Assembly13A380-0007-01-6
*[1]3A380-0008-01-7First Officer Seat As-
sembly
13A380-0008-01-6
*[1]  Make the change in accordance with Ipeco Service Bulletin 380-25-04.
D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-25-00-0054-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-25-00-0054-00A-934A-DApplicable To:
Issue 001, 19 Dec 2014End of data moduleModel 787
See Applicability of this data module
Page 18 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 19

Alert Service Bulletin B787-81205-SB250054-00
ACCOMPLISHMENT INSTRUCTIONS
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-25-00-0054-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 10.
ComplianceSB B787-A-25-00-0054-00A-932A-D Issue 001,
Paragraph 5.
Alert Service Bulletin
B787-81205-SB250054-00 – Appendix A – CAPTAIN
SB B787-A-25-00-0054-0AA-931D-D Issue 001
AND FIRST OFFICER SEAT ASSEMBLY TEST
[Group 1:]
CAPTAIN AND FIRST OFFICER SEAT787 AMM 25-11-01
Procedure
Group 1:
1. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTI-
CLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, METAL
PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE
TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER
ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-25-00-0054-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
B787-A-25-00-0054-00A-933A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 19 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 20

– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
4. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
5. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
6. Where the work instructions include installation of a kept part, a new or serviceable part with
the same part number can be installed as an alternative to the kept part.
7. This service bulletin includes functional test procedures for the systems changed by this service
bulletin. More functional tests can possibly be necessary in accordance with standard mainte-
nance practices because of interruption to other airplane systems.
8. If shading is used, shaded areas in Tasks are to separate the non-critical and non-authoritative
information from the critical and authoritative information.
9. Use of colors in Tasks is based on guidance from the S1000D International specification for
technical publications.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers.
When more than one ACTION is given for a CONDITION number or an OPTION number, do
all of the ACTION numbers for that CONDITION number or OPTION number.
11. The compliance times for the actions in Step 2., Work Instructions are in Data Module SB B787-
A-25-00-0054-00A-932A-D, Paragraph 5., Compliance.
12. Some steps in the Work Instructions are identified as Required for Compliance (RC). If this
service bulletin is mandated by an Airworthiness Directive (AD), then the steps identified as RC
must be done to comply with the AD. Alternative procedures for steps not identified with RC can
be used if the RC steps can still be done as specified, and the airplane can be put back in a
serviceable condition. An Alternative Method of Compliance (AMOC) is not necessary for devi-
ations to steps that are not identified as RC.
2. WORK INSTRUCTIONS
B787-A-25-00-0054-00A-933A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 20 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 21

A. Do the INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST or TERMINATING ACTION: CAPTAIN
SEAT ASSEMBLY REPLACEMENT.
(1) INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST
(a) RC - Do PART 1: INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST.
1) CONDITION 1: NORMAL CLUTCH ENGAGING FOUND.
a) OPTION 1: Repeat PART 1: INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST.
b) OPTION 2: Do PART 3: TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY RE-
PLACEMENT to terminate the repeat test.
2) CONDITION 2: NON-NORMAL CLUTCH ENGAGING FOUND.
a) OPTION 3:
<1> OPTION 3 (ACTION 1): Do PART 2: CAPTAIN SEAT HORIZONTAL OR VERTICAL
ACTUATOR REPLACEMENT.
<2> OPTION 3 (ACTION 2): Repeat PART 1: INTERIM ACTION: CAPTAIN SEAT
ASSEMBLY TEST.
b) OPTION 4: Do PART 3: TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY RE-
PLACEMENT to terminate the repeat test.
(2) TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY REPLACEMENT
(a) RC - Do PART 3: TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY REPLACEMENT.
B. Do the INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST or TERMINATING ACTION: FIRST
OFFICER SEAT ASSEMBLY REPLACEMENT.
(1) INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST
(a) RC - Do PART 4: INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST.
1) CONDITION 1: NORMAL CLUTCH ENGAGING FOUND.
a) OPTION 5: Repeat PART 4: INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY
TEST
b) OPTION 6: Do PART 6: TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY
REPLACEMENT to terminate the repeat test.
2) CONDITION 2: NON-NORMAL CLUTCH ENGAGING FOUND.
a) OPTION 3:
<1> OPTION 7 (ACTION 1): Do PART 5: FIRST OFFICER SEAT HORIZONTAL OR
VERTICAL ACTUATOR REPLACEMENT.
<2> OPTION 7 (ACTION 2): Repeat PART 4: INTERIM ACTION: FIRST OFFICER
SEAT ASSEMBLY TEST.
b) OPTION 8: Do PART 6: TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY
REPLACEMENT to terminate the repeat test.
B787-A-25-00-0054-00A-933A-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 21 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 22

(2) TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY REPLACEMENT
(a) RC - Do PART 6: TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY REPLACE-
MENT.
C. Put the airplane back to a serviceable condition.
D. PART 1: INTERIM ACTION: CAPTAIN SEAT ASSEMBLY TEST
(1) RC - Do a test of the Captain seat assembly in accordance with CAPTAIN SEAT AND FIRST OFFI-
CER SEAT ASSEMBLY TEST in Data Module Appendix A, SB B787-A-25-00-0054-0AA-931D-D.
E. PART 2: CAPTAIN SEAT HORIZONTAL OR VERTICAL ACTUATOR REPLACEMENT
(1) Replace the captain seat horizontal or vertical actuator. Refer to Ipeco Component Maintenance
Manual 25-11-69 as an accepted procedure.
F. PART 3: TERMINATING ACTION: CAPTAIN SEAT ASSEMBLY REPLACEMENT
(1) Remove the Captain Seat Assembly part number 3A380-0007-01-6. Refer to 787 AMM 25-11-01
as an accepted procedure.
(2) RC - Install the Captain Seat Assembly part number 3A380-0007-01-7. Refer to 787 AMM 25-11-01
as an accepted procedure.
(3) Operate the seat to make sure that it will move freely in the seat tracks and is correctly calibrated.
Refer to 787 AMM 25-11-01 as an accepted procedure.
G. PART 4: INTERIM ACTION: FIRST OFFICER SEAT ASSEMBLY TEST
(1) RC - Do a test of the First Officer seat assembly in accordance with CAPTAIN SEAT AND FIRST
OFFICER SEAT ASSEMBLY TEST in Data Module Appendix A, SB B787-A-25-00-0054-0AA-931D-
D.
H. PART 5: FIRST OFFICER SEAT HORIZONTAL OR VERTICAL ACTUATOR REPLACEMENT
(1) Replace the First Officer seat horizontal or vertical actuator. Refer to Ipeco Component Maintenance
Manual 25-11-69 as an accepted procedure.
I. PART 6: TERMINATING ACTION: FIRST OFFICER SEAT ASSEMBLY REPLACEMENT
(1) Remove the First Officer Seat Assembly part number 3A380-0008-01-6. Refer to 787 AMM 25-11-
01 as an accepted procedure.
(2) RC - Install the new First Officer Seat Assembly part number 3A380-0008-01-7. Refer to 787 AMM
25-11-01 as an accepted procedure.
(3) Operate the seat to make sure that it will move freely in the seat tracks and is correctly calibrated.
Refer to 787 AMM 25-11-01 as an accepted procedure.
B787-A-25-00-0054-00A-933A-DApplicable To:
Issue 001, 19 Dec 2014End of data moduleModel 787
See Applicability of this data module
Page 22 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 23

Alert Service Bulletin B787-81205-SB250054-00
Appendix A – CAPTAIN AND FIRST OFFICER SEAT ASSEMBLY TEST
[Group 1:]
THIS ALERT SERVICE BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE
AIRPLANES SHOWN IN DATA MODULE SB B787-A-25-00-0054-00A-932A-D, PARAGRAPH 1.,
Alert:
EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE
BULLETIN TO THE NEW OWNER.
Procedure
Group 1:
1. The following tests are to be carried out with the seat occupied and in a locked position.
A. Horizontal Movement Test
Operate the seat through its full range of horizontal movement to make sure that the seat can move fully
and freely between the stops and locks in all positions. If necessary, adjust the seat track alignment.
Refer to IPECO Component Maintenance Manual 25-11-69 as an accepted procedure.
NOTE: INCORRECT ADJUSTMENT OF THE MANUAL OVERRIDE CABLE MAY RESULT IN UNCOM-
MANDED MOVEMENT OF THE SEAT UNDER LOAD, DAMAGE AND/OR FAILURE OF THE
HORIZONTAL ACTUATOR. 
NOTE: WHEN THE SEAT IS BEING ADJUSTED MANUALLY, ENSURE THE SEAT IS STOPPED
BEFORE RELEASING THE MANUAL CONTROL LEVER. 
B. Horizontal Actuator Manual Override Lever Test
(1) Adjust the seat height to the lowest vertical position. Refer to IPECO Component Maintenance
Manual 25-11-69 as an accepted procedure.
(2) Operate the manual override lever and measure for excessive free play (more than 0.13 inch free
play measured at tip of lever)
NOTE: Excessive lever free play may be due to a control cable that is out of adjustment, or may
indicate the actuator clutch is only partially engaging. 
(a) If excessive free play is found, adjust the cable as follows (see Detail A illustration below):
1) Loosen the horizontal actuator manual override cable lock nut.
2) Move the cable adjustment nut until there is a free play of 0.06 - 0.13 inch in the horizontal
lever.
3) Tighten the manual override cable lock nut.
4) Make sure that there is free movement in the horizontal lever and readjust until there is free
movement.
B787-A-25-00-0054-0AA-931D-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 23 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 24

5) Operate the horizontal lever and make sure that the horizontal lever moves smoothly back
to its original position when released. If the lever does not move smoothly, the seat has the
non-normal clutch engaging.
(b) If normal free play is found (0.06 - 0.13 inch), operate the horizontal lever and make sure that
the horizontal lever moves smoothly back to its original position when released. If the lever does
not move smoothly, the seat has the non-normal clutch engaging.
C. Vertical Movement Test
Operate the seat through its full range of vertical movement to make sure that the seat can move fully
and freely between the stops and locks in all positions. If necessary, remove obstruction or replace
braided rubber cords. Refer to IPECO Component Maintenance Manual 25-11-69 as an accepted pro-
cedure.
NOTE: INCORRECT ADJUSTMENT OF THE MANUAL OVERRIDE CABLE MAY RESULT IN UNCOM-
MANDED MOVEMENT OF THE SEAT UNDER LOAD, DAMAGE AND/OR FAILURE OF THE
VERTICAL ACTUATOR. 
NOTE: WHEN THE SEAT IS BEING ADJUSTED MANUALLY, ENSURE THE SEAT IS STOPPED
BEFORE RELEASING THE MANUAL CONTROL LEVER. 
D. Vertical Actuator Manual Override Lever Test
(1) Adjust the seat height to the lowest vertical position. Refer to IPECO Component Maintenance
Manual 25-11-69 as an accepted procedure.
(2) Operate the manual override lever and measure for excessive free play (more than 0.13 inch free
play measured at tip of lever).
NOTE: Excessive lever free play may be due to a control cable that is out of adjustment, or may
indicate the actuator clutch is only partially engaging. 
(a) If excessive free play is found, adjust the cable as follows (see Detail B illustration below):
1) Loosen the vertical actuator manual override cable lock nut.
2) Move the cable adjustment nut until there is a free play of 0.06 - 0.13 inch in the vertical
lever.
3) Tighten the manual override cable lock nut.
4) Make sure that there is free movement in the vertical lever and readjust until there is free
movement.
5) Operate the vertical lever and make sure that the vertical lever moves smoothly back to its
original position when released. If the lever does not move smoothly, the seat has the non-
normal clutch engaging.
(b) If normal free play is found (0.06 - 0.13 inch), operate the vertical lever and make sure that the
vertical lever moves smoothly back to its original position when released. If the lever does not
move smoothly, the seat has the non-normal clutch engaging.
B787-A-25-00-0054-0AA-931D-DApplicable To:
Issue 001, 19 Dec 2014Model 787
See Applicability of this data module
Page 24 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN

### Page 25 (OCR)

@BOEING  B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN
CAPTAIN'S SEAT
(FIRST OFFICER'S SEAT OPPOSITE)
(LOOKING DOWN)
FWD
2363782
ICN-B787-A-000061-A-81205-08860-A-01-1
Figure 1
Applicable To:  B787-A-25-00-0054-0AA-931D-D
Model 787  Issue 001, 19 Dec 2014
See Applicability of this data module
Page 25 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 26 (OCR)

B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN
FORE: AFT
• •  •
LOCK NUT
HORIZONTAL ACTUATOR
MANUAL OVERRIDE CABLE
ADJUSTING NUT
FWD
2361796
ICN-B787-A-000061-A-81205-08861-A-01-1
Figure 2
Applicable To:  B787-A-25-00-0054-0AA-931D-D
Model 787  Issue 001, 19 Dec 2014
See Applicability of this data module
Page 26 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 27 (OCR)

Q BOEINE  B787-81205-SB250054-00
Issue 001, 19 Dec 2014
AIRCRAFT SERVICE BULLETIN
ADJUSTING NUT
VERTICAL ACTUATOR
MANUAL OVERRIDE CABLE
LOCK NUT
COLLEGI
FWD
2361797
ICN-B787-A-000061-A-81205-08862-A-01-1
Figure 3
Applicable To:  B787-A-25-00-0054-0AA-931D-D
Model 787  End of data module  Issue 001, 19 Dec 2014
See Applicability of this data module
Page 27 of 27
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
