# Boeing Requirements Bulletin B787-81205-SB250176-00 RB

Copy: Revision 001 ("B787-81205-SB250176-RB--01"), 20 pages: PDF https://openairdocs.org/files/sha256/04/35/04354060f345d8cda274a86717e4c3e6406afdb32e6f85477491d9b96e5c6512; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250176-00-rb/file/04354060f345.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0518, the docket of a proposed AD (Federal Register 2019-14901, 2020-06503). Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Requirements Bulletin)
- Number: B787-81205-SB250176-00 RB
- Latest revision known: B787-81205-SB250176-00 RB, Issue 001, dated March 6, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb250176-00-rb

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb250176-00-rb/proposed.md).

## Text (20 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0518, the docket of a proposed AD (Federal Register 2019-14901, 2020-06503). Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Requirements Bulletin B787-81205-SB250176-00 RB EQUIPMENT AND
FURNISHINGS - Passenger Compartment Panel and Lining - Passenger
and Service Door Assist Handle Inspection
Copyright © 2019 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 1 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
2.0
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
TASK 1 – MAIN PASSENGER COMPARTMENT - PASSENGER AND SERVICE DOOR ASSIST HANDLES
- INSPECTION [Group 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TASK 2 – MAIN PASSENGER COMPARTMENT - DOORWAY LININGS - DOORWAY SUPPORT ASSEMBLY
REPLACEMENT [Group 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 2 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 3

BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN
"RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH
THE SB REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This service bulletin is applicable to 787-8 and 787-9 Airplanes, line numbers 1-527, 529-547, 549-
564, 566-607, 609-618 and 621 in 1 Group(s). Where the effectivity is presented with hyphens between
line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means
line numbers 1 through 9 inclusive.
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB250176-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB250176-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Accomplish the required action(s), based on the applicable condition(s) in Table 4, in accordance with the
Accomplishment Instructions.
Table 4  PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 24 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB250176-00 RB.
Do a Detailed Inspection of
all passenger and service
door assist handles for
correct installation.
All Airplanes
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 3 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 4

Table 4  PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
--No further action required.CONDITION 1: DOOR
ASSIST HANDLE IS IN-
STALLED CORRECTLY.
-Before further
flight.
ACTION 1: Re-install the
door assist handle.
CONDITION 2: ANY
DOOR ASSIST HANDLE
NOT INSTALLED COR-
RECTLY. ACTION 2: Do a DetailedInspection for correct instal-
lation.
--No further action required.CONDITION 2.1: DOOR
ASSIST HANDLE IS IN-
STALLED CORRECTLY.
-Before further
flight.
Replace the doorway sup-
port assembly.
CONDITION 2.2: DOOR
ASSIST HANDLE IS NOT
INSTALLED CORRECTLY.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 4 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 5

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 6. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
7. A Detailed Inspection is defined as: An intensive examination of a specific item, installation,
or assembly to detect damage, failure, or irregularity. This could include tactile assessment
in which a component or assembly can be checked for tightness/security. Available
lighting is normally supplemented with a direct source of good lighting at an intensity
deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
8. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
9. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION, do
all of the ACTION numbers for that CONDITION or OPTION.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 5 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 6

11. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any tasks identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified tasks. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified tasks, can still be done as specified, and the airplane can be put back in an
airworthy condition. Tasks not required for compliance are omitted from the RB.
12. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Table 1  PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION
Refer to the listed proce-
dures in B787-81205-
SB250176-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS
DOOR
-Do a Detailed Inspection
of all passenger and ser-
vice door assist handles
for correct installation.
All Airplanes
-Task 1
PART 3: CLOSE ACCESS
DOOR
-No further action required.CONDITION 1: DOOR
ASSIST HANDLE IS IN-
STALLED CORRECTLY
PART 2: DOOR ASSIST
HANDLE INSTALLATION
-ACTION 1: Re-install the
door assist handle.
CONDITION 2: ANY
DOOR ASSIST HANDLE
NOT INSTALLED COR-
RECTLY -Task 1ACTION 2: Do a DetailedInspection for correct instal-
lation.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 6 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 7

Table 1  PASSENGER AND SERVICE DOOR ASSIST HANDLES - INSPECTION
Refer to the listed proce-
dures in B787-81205-
SB250176-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 3: CLOSE ACCESS
DOOR
-No further action required.CONDITION 2.1: DOOR
ASSIST HANDLE IS IN-
STALLED CORRECTLY
-Task 2Replace the doorway sup-
port assembly.
CONDITION 2.2: DOOR
ASSIST HANDLE IS NOT
INSTALLED CORRECTLY PART 3: CLOSE ACCESSDOOR-
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 7 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 8

Task 1 – MAIN PASSENGER COMPARTMENT - PASSENGER AND SERVICE
DOOR ASSIST HANDLES - INSPECTION [Group 1:]
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN
"RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH
THE SB REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 8 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 9 (OCR)

Q BOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
PASSENGER ENTRY DOOR
(TYPICAL)
ICN-B787-A-000061-A-81205-14895-A-01-1
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 9 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 10 (OCR)

OBOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
—SPRING
CLIP
TYPICAL
B
ICN-B787-A-000061-A-81205-14896-A-01-1
Figure 2
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 10 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 11 (OCR)

BOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
SPRING CLIP
AGAINST DOOR
- STRUCTURE
SPRING CLIP NOT
AGAINST DOOR
STRUCTURE
INCORRECT INSTALLATION
2845087
ICN-B787-A-000061-A-81205-14897-A-01-1
Figure 3
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 11 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 12 (OCR)

OBOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
NO GAP VISIBLE  GAP VISIBLE
CORRECT INSTALLATION  INCORRECT INSTALLATION
2845131
ICN-B787-A-000061-A-81205-14898-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this task.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 12 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 13

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1-Door Assist HandleInspect1
*[1]  Do a detailed inspection of the door assist handle for correct installation.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 13 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 14

Task 2 – MAIN PASSENGER COMPARTMENT - DOORWAY LININGS -
DOORWAY SUPPORT ASSEMBLY REPLACEMENT [Group 1:]
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN
"RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH
THE SB REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 14 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 15 (OCR)

A BOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
PASSENGER ENTRY DOOR
(TYPICAL)
2845170
ICN-B787-A-000061-A-81205-14899-A-01-1
Figure 1
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 15 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 16 (OCR)

@ BOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
OA UPPER SEAL  DEPRESSOR
4) UPPER LINER
SUPPORT BRACKET
4) FORWARD UPPER
SEAL DEPRESSOR
3 LOCATIONS
1 4) DOOR ASSIST
HANDLE
4 LOCATIONS
₴ 3
2845173
ICN-B787-A-000061-A-81205-14900-A-01-1
Figure 2
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 16 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 17 (OCR)

@ BOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
UPPER SEAL € 14
DEPRESSOR
UPPER LINER 514
SUPPORT BRACKET
DEPRESSOR On  AFT SEAL
DOOR ASSIST A 11
HANDLE
C
ICN-B787-A-000061-A-81205-14901-A-01-1
Figure 3
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 17 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 18 (OCR)

_BOEING  B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN
(13) 3 LOCATIONS
6 13 5 LOCATIONS
12 3 LOCATIONS
€ 13 4 LOCATIONS
2845184
ICN-B787-A-000061-A-81205-14902-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 18 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 19

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1-FORWARD UPPER
SEAL DEPRESSOR
Remove / Keep1
*[1]1-UPPER SEAL DE-
PRESSOR
Remove / Keep
*[2]1-UPPER SUPPORT
BRACKET
Remove / Keep
*[1]1-DOOR ASSIST HAN-
DLE
Remove / Keep
7BACB30NM3K6BOLTRemove / Keep2
7BACW10BP3CKWASHERRemove / Keep
1-FORWARD UPPER
DOORWAY SUPPORT
ASSEMBLY
Remove
1-FORWARD UPPER
DOORWAY SUPPORT
ASSEMBLY
Install (New)3
7BACW10BP3CKWASHERInstall (Kept)
7BACB30NM3K6BOLTInstall (Kept)
*[1]1-DOOR ASSIST HAN-
DLE
Install (Kept)4
*[2]1-UPPER SUPPORT
BRACKET
Install (Kept)
*[1]1-UPPER SEAL DE-
PRESSOR
Install (Kept)
*[1]1-FORWARD UPPER
SEAL DEPRESSOR
Install (Kept)
*[1]1-AFT SEAL DEPRES-
SOR
Remove / Keep5
*[1]1-UPPER SEAL DE-
PRESSOR
Remove / Keep
*[2]1-UPPER SUPPORT
BRACKET
Remove / Keep
*[1]1-DOOR ASSIST HAN-
DLE
Remove / Keep
12BACB30NM3K6BOLTRemove / Keep6
12BACW10BP3CKWASHERRemove / Keep
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 19 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

### Page 20

Table 1  
More DataQtyIdentificationNameActionStep
3BACB30NM3K9BOLTRemove / Keep7
3BACW10BP3CKWASHERRemove / Keep
1BACB30NM3K7BOLTRemove / Keep8
1BACW10BP3CKWASHERRemove / Keep
1-AFT DOORWAY SUP-
PORT BRACKET
Remove9
1-AFT DOORWAY SUP-
PORT BRACKET
Install (New)10
1BACW10BP3CKWASHERInstall (Kept)11
1BACB30NM3K7BOLTInstall (Kept)
3BACW10BP3CKWASHERInstall (Kept)12
3BACB30NM3K9BOLTInstall (Kept)
12BACW10BP3CKWASHERInstall (Kept)13
12BACB30NM3K6BOLTInstall (Kept)
*[1]1-DOOR ASSIST HAN-
DLE
Install (Kept)14
*[2]1-UPPER SUPPORT
BRACKET
Install (Kept)
*[1]1-UPPER SEAL DE-
PRESSOR
Install (Kept)
*[1]1-AFT SEAL DEPRES-
SOR
Install (Kept)
*[1]  Refer to 787 AMM 25-21-02 as an accepted procedure.
*[2]  Refer to 787 AMM 52-11-24 as an accepted procedure.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
Page 20 of 20
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB250176-00 RB
Issue 001, 06 Mar 2019
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
