# Boeing Alert Requirements Bulletin B787-81205-SB250290-00 RB

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 002 ("B787-81205-SB250290-00 RB Issue 002"), 19 pages: PDF https://openairdocs.org/files/sha256/51/8a/518abc45e5f3588be0feaf0132349b2c19d0ff70fe65d8b84d86eede762a94d1; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250290-00-rb/file/518abc45e5f3.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1103; AD 2026-02-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001 ("787-25A0290-00 RB"), 16 pages: PDF https://openairdocs.org/files/sha256/a9/5f/a95f40b977cb2efb54319d4294dcae00da34b86449bb400c1cc98f26c9badea9; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250290-00-rb/file/a95f40b977cb.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-0657; AD 2024-01-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB250290-00 RB
- Latest revision known: B787-81205-SB250290-00 RB, Issue 002, dated January 31, 2025 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb250290-00-rb

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-02-10](https://openairdocs.org/ad/2026-02-10.md), effective Mar 9, 2026: Revisions 001 and 002
- [AD 2024-01-01](https://openairdocs.org/ad/2024-01-01.md), effective Mar 7, 2024: Revision 001

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/boeing/b787-81205-sb250290-00-rb/proposed.md).

## Text (19 pages)

Revision 002, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1103; AD 2026-02-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB250290-00 RB EQUIPMENT
AND FURNISHING - Lavatory - Lavatory Units Faucet Control Module
Inspection
Copyright © 2025 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 1 of 19
Export Controlled ECCN: 9E991
See page 1 for details
2.0
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TASK 1 – LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION [Group 1] . . . . . . 18
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 2 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

Alert Requirements Bulletin B787-81205-SB250290-00 RB EQUIPMENT
AND FURNISHING - Lavatory - Lavatory Units Faucet Control Module
Inspection
Revision Transmittal Information
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
This revision includes all pages of the requirements bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2024-01-01 is related to Requirements
Bulletin B787-81205-SB250290-00 RB. The effective date of AD 2024-01-01 is March 07, 2024.
Airplane line numbers 688, 955, 971, 983, 990, 997-998, 1000, 1009-1011, 1014-1015, 1020, 1023, 1027-
1028, 1033-1037, 1039, 1042-1043, 1046, 1049-1053, 1063-1070, 1073, 1076-1081, 1083-1084, 1086,
1088-1090, 1092-1093, 1096-1097, 1100-1102, 1104-1108, 1110-1111, 1115-1116, 1119-1120, 1123-1124,
1127, 1135, 1146, 1149-1150, 1152-1160, 1162-1166, 1168-9996 were removed from the effectivity of this
bulletin effectivity.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None.
2. REASON FOR REVISION
This issue is sent to remove airplanes delivered with the new Faucet Control Module (FCM) installed in all
affected lavatory units.
These sections were changed:
1. In Planning Information - Paragraph 1., Effectivity, updated effectivity to remove airplanes.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 3 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

2. In Planning Information - Paragraph 5., Compliance, added AD reference and compliance table footnotes.
3. In Accomplishment Instructions - Step 1., General Information, updated Note 1 and added Note 13 as
Requirements Bulletin content.
4. In Accomplishment Instructions - Step 2., Work Instructions, added Requirements table footnotes.
Change marks are added, except in EFFECTIVITY, and format changes, to show the location of all content
changes.
3. REVISION HISTORY
Table 1  
Service BulletinService BulletinRequirement BulletinRequirement Bulletin
787-25A0290787-25A0290787-25A0290 RB787-25A0290 RB
Issue DateIssue Date
November 01, 2022Issue 1:November 01, 2022Issue 1:
January 31, 2025Issue 2:January 31, 2025Issue 2:
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 4 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-687, 689-954, 956-
970, 972-982, 984-989, 991-996, 999, 1001-1008, 1012-1013, 1016-1019, 1021-1022, 1024-1026,
1029-1032, 1038, 1040-1041, 1044-1045, 1047-1048, 1054-1062, 1071-1072, 1074-1075, 1082,
1085, 1087, 1091, 1094-1095, 1098-1099, 1103, 1109, 1112-1114, 1117-1118, 1121-1122, 1125-
1126, 1128-1134, 1136-1145, 1147-1148, 1151, 1161, 1167 in 1 Group(s). Where the effectivity
is presented with hyphens between line numbers, the airplane applicability means "through" and
"inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8, -9, and -10 Airplanes with affected FCMs-1
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA144
1ZA152 - ZA156
1ZA175 - ZA189
1ZA195 - ZA204
1ZA215 - ZA225
1ZA230 - ZA256
GroupVariable Number
1ZA260 - ZA277
1ZA285 - ZA296
1ZA317 - ZA324
1ZA327
1ZA334 - ZA335
1ZA341 - ZA342
1ZA380 - ZA389
1ZA430 - ZA439
1ZA445 - ZA489
GroupVariable Number
1ZA506 - ZA516
1ZA536 - ZA545
1ZA560 - ZA567
1ZA576 - ZA580
1ZA586
1ZA588 - ZA593
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655 - ZA663
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 5 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

GroupVariable Number
1ZA665 - ZA677
1ZA680 - ZA685
1ZA695 - ZA698
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA831
1ZA839
1ZA841 - ZA842
1ZA846 - ZA848
1ZA853 - ZA862
1ZA873 - ZA876
1ZA881 - ZA888
1ZA916 - ZA920
1ZA949 - ZA950
1ZA954 - ZA959
1ZA963 - ZA966
1ZA968 - ZA972
1ZA990
1ZB001 - ZB012
1ZB021 - ZB043
1ZB047 - ZB060
1ZB077 - ZB081
1ZB097 - ZB121
1ZB127 - ZB136
1ZB167 - ZB191
1ZB197 - ZB198
1ZB217
GroupVariable Number
1ZB219 - ZB220
1ZB224 - ZB229
1ZB234 - ZB242
1ZB246 - ZB248
1ZB251 - ZB258
1ZB261 - ZB262
1ZB265 - ZB280
1ZB299
1ZB302 - ZB305
1ZB332 - ZB338
1ZB362 - ZB379
1ZB407 - ZB435
1ZB446 - ZB467
1ZB536 - ZB543
1ZB545 - ZB547
1ZB558 - ZB587
1ZB603 - ZB618
1ZB646 - ZB649
1ZB656 - ZB665
1ZB676 - ZB681
1ZB688 - ZB707
1ZB733 - ZB735
1ZB738 - ZB740
1ZB742 - ZB745
1ZB749 - ZB750
1ZB753 - ZB757
1ZB763 - ZB768
1ZB771 - ZB775
1ZB778 - ZB821
1ZB828 - ZB841
1ZB858 - ZB863
GroupVariable Number
1ZB874 - ZB876
1ZB887
1ZB890
1ZB893 - ZB902
1ZB908 - ZB918
1ZB922
1ZB924
1ZB926 - ZB927
1ZB934 - ZB946
1ZB951
1ZB967 - ZB971
1ZB977 - ZB978
1ZB980 - ZB986
1ZB990 - ZB991
1ZB993 - ZB997
1ZC001 - ZC015
1ZC019 - ZC020
1ZC036 - ZC056
1ZC061 - ZC069
1ZC101 - ZC107
1ZC116 - ZC118
1ZC126 - ZC129
1ZC151 - ZC152
1ZC155 - ZC158
1ZC165
1ZC211 - ZC219
1ZC221 - ZC225
1ZC239 - ZC240
1ZD001 - ZD009
1ZD012 - ZD024
1ZD027 - ZD028
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 6 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

GroupVariable Number
1ZD048
1ZE001 - ZE006
1ZE008
1ZE013
1ZE016 - ZE017
1ZE031 - ZE032
1ZE040 - ZE045
1ZE048
1ZE085 - ZE086
1ZE090 - ZE091
1ZE095 - ZE096
1ZE100
GroupVariable Number
1ZE105 - ZE106
1ZE110 - ZE112
1ZE115
1ZE150
1ZE165 - ZE166
1ZE170 - ZE171
1ZE195 - ZE198
1ZE220 - ZE241
1ZE270
1ZE273
1ZE310 - ZE311
1ZE340 - ZE341
GroupVariable Number
1ZE350 - ZE362
1ZE375
1ZE380 - ZE381
1ZE415 - ZE416
1ZE420
1ZE425 - ZE426
1ZE435 - ZE437
1ZE455 - ZE456
1ZE481
1ZE486 - ZE488
1ZE581
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2024-01-01 is related to Requirements
Bulletin B787-81205-SB250290-00 RB. The effective date of AD 2024-01-01 is March 07, 2024.
Do the required actions, based on the applicable condition(s) in Table 4, in accordance with Accomplishment
Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
The Conditions, Actions and Compliance times shown apply to each faucet control module independently.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 7 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

Table 4  LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 12 months after the Issue 001 date
of the Requirements Bulletin B787-81205-
SB250290-00 RB
Do a general visual
inspection of the
area under all lavato-
ry washbasins for
evidence of intermit-
tent and active leaks
at the Faucet Control
Module (FCM). *[1]
All Airplanes
or
Within 12 months after the date of issuance
of the original airworthiness certificate or
the original export certificate of airworthi-
ness, whichever occurs later.
1000 Flight Hours-Repeat the general
visual inspection of
the area under all
lavatory washbasins
for evidence of inter-
mittent and active
leaks at the FCM.
*[1]*[2]*[3]
CONDITION 1: NO
EVIDENCE OF IN-
TERMITTENT AND
NO ACTIVE LEAK
FOUND.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 8 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Table 4  LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flightCONDITION 2 (OP-
TION 1: ACTION 1):
Deactivate water
supply to the affected
FCM.
CONDITION 2: ANY
EVIDENCE OF IN-
TERMITTENT LEAK
OR ANY ACTIVE
LEAK FOUND AT
ANY FCM. -Before further flight after activation of affect-
ed water supply
CONDITION 2 (OP-
TION 1: ACTION 2):
Replace affected
FCM with new or
serviceable FCM. *[4]
-Before further flight after activation of affect-
ed water supply
CONDITION 2 (OP-
TION 1: ACTION 3):
At affected lavatory
washbasin(s), do a
leak test. If a leak is
found, do applicable
corrective action.
Repeat the leak test
and make sure no
leak is found.
1000 Flight Hours-CONDITION 2 (OP-
TION 1: ACTION 4):
Repeat the general
visual inspection of
the area under all
lavatory washbasins
for evidence of inter-
mittent and active
leaks at the FCM.
*[1]*[3]*[2]
-Before further flightCONDITION 2 (OP-
TION 2: ACTION 1):
Replace affected
FCM with new or
serviceable FCM. *[4]
-Before further flight
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 9 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Table 4  LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
CONDITION 2 (OP-
TION 2: ACTION 2):
At all affected lavato-
ry washbasin(s), do
a leak test. If a leak
is found, do applica-
ble corrective action.
Repeat the leak test
and make sure no
leak is found.
1000 Flight Hours-CONDITION 2 (OP-
TION 2: ACTION 3):
Repeat the general
visual inspection of
the area under all
lavatory washbasins
for evidence of inter-
mittent and active
leaks at the FCM.
*[1]*[3]*[2]
*[1]  Evidence of an intermittent or active leak can include a water stain or puddle of water.
*[2]  The replacement of the FCM P/N AFUT000200A0001 or AFUT000200A0002 with FCM P/N AFUT000200A0004 is the terminating
action for the repeat inspections in B787-81205-SB250290-00 RB, at any lavatory location.
*[3]  It is acceptable to do this repetitive task in accordance with Boeing 787 Maintenance Planning Document D011Z009-03, Appendix L
- Items with Multiple Service Limit Intervals Maintenance Review Board Report (MRBR) item number 38-025-00 Task - Inspect (Gen-
eral Visual) the Lavatory Faucet Control Module (FCM) for degradation and leakage when pressurized, dated November 30, 2023, or
later approved at the Service Limit Interval specified for the applicable FCM Part Number Series.
*[4]  A serviceable FCM is a FCM that conforms to type design and is in condition for safe operation. Normal wear and tear is permissible
as long as damage limits aren't exceeded. Refer to Component Maintenance Manual (CMM) 38-11-08 as an accepted FCM overhaul
procedure.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 10 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

In addition, the Manager of the FAA Continued Operational Safety Branch approves accomplishment of
the actions defined in Requirements Bulletin B787-81205-SB250290-00 RB Issue 002 as an alternative
method of compliance to the requirements of paragraph (g) of AD 2024-01-01.
All provisions of AD 2024-01-01 that are not specifically referenced in the above statement remain fully
applicable and must be complied with.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 11 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
5. A General Visual Inspection is defined as: A visual examination of an interior or exterior
area, installation or assembly to detect obvious damage, failure or irregularity. This level
of inspection is made from within touching distance unless otherwise specified. A mirror
may be necessary to ensure visual access to all surfaces in the inspection area. This
level of inspection is made under normal available lighting conditions such as daylight,
hangar lighting, flashlight or drop-light and may require removal or opening of access
panels or doors. Stands, ladders or platforms may be required to gain proximity to the
area being checked.
6. Evidence of an intermittent or active leak can include a water stain or puddle of water.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 12 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

7. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
8. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
12. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
13. The CONDITIONS, ACTIONS and OPTIONS shown apply to each Faucet Control Module
(FCM) independently.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 13 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

Table 1  LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
Refer to the listed proce-
dures in SB B787-81205-
SB250290-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: GET ACCESS--All Airplanes
-TASK 1Do a General Visual In-
spection (GVI) of the area
under all lavatory wash-
basins for evidence of inter-
mittent and active leaks at
the Faucet Control Module
(FCM). *[1]
PART 6: CLOSE ACCESS--CONDITION 1: NO EVI-
DENCE OF INTERMIT-
TENT AND NO ACTIVE
LEAK FOUND.
-TASK 1Repeat the GVI of the area
under all lavatory wash-
basins for evidence of inter-
mittent and active leaks at
the FCM. *[1]*[2]*[3]
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 14 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

Table 1  LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
Refer to the listed proce-
dures in SB B787-81205-
SB250290-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2: DEACTIVATE
WATER SUPPLY
-CONDITION 2 (OPTION
1: ACTION 1): Deactivate
water supply to the affect-
ed FCM.
CONDITION 2: ANY EVI-
DENCE OF INTERMIT-
TENT LEAK OR ANY AC-
TIVE LEAK FOUND AT
ANY FCM PART 7: FCM REPLACE-
MENT
-CONDITION 2 (OPTION
1: ACTION 2): Replace af-
fected FCM with new or
serviceable FCM *[4] PART 3: ACTIVATE WA-TER SUPPLY-
PART 4: LEAK TEST-CONDITION 2 (OPTION
1: ACTION 3): At affected
lavatory washbasin(s), do
a leak test. If a leak is
found, do applicable correc-
tive action. Repeat the leak
test and make sure no leak
is found.
PART 5: CLEAN-
-TASK 1CONDITION 2 (OPTION
1: ACTION 4): Repeat the
GVI of the area under all
lavatory washbasins for
evidence of intermittent
and active leaks at the
FCM. *[1]*[3]*[2]
PART 6: CLOSE ACCESS--
PART 2: DEACTIVATE
WATER SUPPLY
-CONDITION 2 (OPTION
2: ACTION 1): Replace af-
fected FCM with new or
serviceable FCM *[4] PART 7: FCM REPLACE-MENT-
PART 3: ACTIVATE WA-
TER SUPPLY
-
PART 4: LEAK TEST-
PART 5: CLEAN-
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 15 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16

Table 1  LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
Refer to the listed proce-
dures in SB B787-81205-
SB250290-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
CONDITION 2 (OPTION
2: ACTION 2): At affected
lavatory washbasin(s), do
a leak test. If a leak is
found, do applicable correc-
tive action. Repeat the leak
test and make sure no leak
is found.
-TASK 1CONDITION 2 (OPTION
2: ACTION 3): Repeat the
GVI of the area under all
lavatory washbasins for
evidence of intermittent
and active leaks at the
FCM. *[1]*[3]*[2]
PART 6: CLOSE ACCESS--
*[1]  Evidence of an intermittent or active leak can include a water stain or puddle of water.
*[2]  The replacement of the FCM P/N AFUT000200A0001 or AFUT000200A0002 with FCM P/N AFUT000200A0004 is the terminating
action for the repeat inspections in Table 5 LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION, at each lavatory
location.
*[3]  It is acceptable to do this repetitive task in accordance with Boeing 787 Maintenance Planning Document D011Z009-03, Appendix L
- Items with Multiple Service Limit Intervals Maintenance Review Board Report (MRBR) item number 38-025-00 Task - Inspect (Gen-
eral Visual) the Lavatory Faucet Control Module (FCM) for degradation and leakage when pressurized, dated November 30, 2023, or
later approved at the Service Limit Interval specified for the applicable FCM Part Number Series.
*[4]  A serviceable FCM is a FCM that conforms to type design and is in condition for safe operation. Normal wear and tear is permissible
as long as damage limits are not exceeded. Refer to Jamco Component Maintenance Manual (CMM) 38-11-08 as an accepted FCM
overhaul procedure.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 16 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 17

Task 1 – LAVATORY UNIT FAUCET CONTROL MODULE (FCM) -
INSPECTION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 17 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18 (OCR)

Q BOEING  B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
DOOR 4
~ DOOR 3
DOOR 2
DOOR 1  LAVATORY
(TYPICAL)
WATER SUPPLY
HOSE
WASHBASIN
COUPLING
COUPLING-
WATER SUPPLY
HOSE
WATER HEATER
WATER SUPPLY
SHUT OFF VALVE
TYPICAL
A-A  3008244
INSPECTION AREA
ICN-B787-A-000061-A-81205-18463-A-01-1
Task 1 Figure 1 LAVATORY UNIT FAUCET CONTROL MODULE (FCM) - INSPECTION
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 18 of 19
Export Controlled ECCN: 9E991
See page 1 for details

### Page 19

1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]--Faucet Assembly,
Lavatory
Inspect1
*[1]  Activate the lavatory water faucet for a minimum 15 seconds, to pressurize the FCM with water.
*[2]  Do a General Visual Inspection for evidence of intermittent and active leaks. Evidence of intermittent leaks are water stains or puddles
of water, from the Faucet Control Module (FCM), water supply hoses, and couplings.
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
Page 19 of 19
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250290-00 RB
Issue 002, 31 Jan 2025 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
