# Boeing Alert Requirements Bulletin B787-81205-SB250299-00 RB

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 001 ("SB-787-25A0299-01-001-RB"), 37 pages: PDF https://openairdocs.org/files/sha256/ef/44/ef44cf6dd1c8b2dc2f2cb115ae23b1d226d98f756f57e6a0a343f7300751dcba; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250299-00-rb/file/ef44cf6dd1c8.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1884, the docket of a proposed AD (Federal Register 2024-15235, 2025-02069). Not covered by OpenAirDocs’ CC0 dedication.
- B787-81205-SB250299-00 RB_002 ("B787-81205-SB250299-00 RB_002"), 40 pages: PDF https://openairdocs.org/files/sha256/a6/43/a643e3f8d8bc2187836749f807144186af76c1e441bae4ba15e21e8a9a0372eb; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250299-00-rb/file/a643e3f8d8bc.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1114; AD 2026-09-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB250299-00 RB
- Latest revision known: B787-81205-SB250299-00 RB, Issue 002, dated February 28, 2025 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb250299-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-09-01](https://openairdocs.org/ad/2026-09-01.md), effective Jun 3, 2026: Revisions 001 and 002

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/boeing/b787-81205-sb250299-00-rb/proposed.md).

## Text (37 pages)

Revision 001, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1884, the docket of a proposed AD (Federal Register 2024-15235, 2025-02069). Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB250299-00 RB EQUIPMENT
AND FURNISHINGS - General - Lavatory and Galley Clamshell Coupling
Safety Strap Inspection
Copyright © 2023 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 1 of 37
Export Controlled ECCN: 9E991
See page 1 for details
5.0
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TASK 1 – POTABLE WATER SYSTEM CLAMSHELL COUPLING DETAILED INSPECTION  [Group 1] . 11
TASK 2 – POTABLE WATER SYSTEM CLAMSHELL COUPLING CORRECT INSTALLATION [Group 1] . 15
TASK 3 – POTABLE WATER SYSTEM CLAMSHELL COUPLING INSTALLATION  [Group 1] . . . . . . 19
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 2 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9 Airplane(s), line number(s) 6-292, 294, 347, 367, 460,
476, 513, 535, 660, 1057, 1059 in 1 Group(s). Where the effectivity is presented with hyphens
between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers
1-9 means line numbers 1 through 9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 and 787-9 airplanes.-1
Airplane Models: 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA140
1ZA152 - ZA153
1ZA175 - ZA189
1ZA195 - ZA199
1ZA215 - ZA223
1ZA230 - ZA249
1ZA260 - ZA275
1ZA285 - ZA296
1ZA317 - ZA324
1ZA327
GroupVariable Number
1ZA334 - ZA335
1ZA341
1ZA380 - ZA389
1ZA430 - ZA439
1ZA445 - ZA457
1ZA460 - ZA481
1ZA506 - ZA516
1ZA536 - ZA545
1ZA560 - ZA567
1ZA576 - ZA580
1ZA586
1ZA588 - ZA592
1ZA610 - ZA617
GroupVariable Number
1ZA650 - ZA652
1ZA655 - ZA661
1ZA665 - ZA675
1ZA680 - ZA683
1ZA695
1ZA715 - ZA716
1ZA740 - ZA741
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA822
1ZA841
1ZA846 - ZA847
1ZB001 - ZB005
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 3 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZB021
1ZB027 - ZB030
1ZB077 - ZB079
1ZB127 - ZB129
GroupVariable Number
1ZB167 - ZB171
1ZB197 - ZB198
1ZB224 - ZB225
1ZB407
GroupVariable Number
1ZD001 - ZD009
1ZD012
1ZE455 - ZE456
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2023-08-04 is related to Requirements
Bulletin B787-81205-SB250299-00 RB. The effective date of AD 2023-08-04 is June 29, 2023.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB250299-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB250299-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required action, based on the applicable condition in Table 4 in accordance with the Accom-
plishment Instructions.
Table 4  Lavatory and Galley Clamshell Coupling Safety Strap Inspection
Compliance TimeActionCondition
Within 36 months after the Issue 001
date of Requirements Bulletin B787-
81205-SB250299-00 RB
Do a detailed inspection of all
clamshell couplings at Door 1 and
Door 3 lavatories and galleys with
potable water system for a safety
strap and that clamshell coupling
with a safety strap is correctly in-
stalled. *[1]*[2]
ALL AIRPLANES
-No further action necessary.*[3]CONDITION 1: CLAMSHELL COU-
PLING WITH SAFETY STRAP
FOUND AND CORRECTLY IN-
STALLED.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 4 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

Table 4  Lavatory and Galley Clamshell Coupling Safety Strap Inspection
Compliance TimeActionCondition
Before further flight.ACTION 1: At all affected loca-
tion(s), correctly install clamshell
coupling with safety strap.*[4]
CONDITION 2: ANY INCORRECT-
LY INSTALLED LAVATORY AND
GALLEY CLAMSHELL COUPLING
WITH SAFETY STRAP FOUND.
ACTION 2: At all affected loca-
tion(s), do a leak test. If a leak is
found, do applicable corrective ac-
tion. Repeat the leak test and make
sure no leak is found.*[4]
Before further flight.ACTION 1: At all affected loca-
tion(s), replace with clamshell cou-
pling with safety strap.*[4]
CONDITION 3: ANY LAVATORY
AND GALLEY CLAMSHELL COU-
PLING WITHOUT SAFETY STRAP
FOUND.
ACTION 2: At all affected loca-
tion(s), do a leak test. If a leak is
found, do applicable corrective ac-
tion. Repeat the leak test and make
sure no leak is found.*[4]
*[1]  Not all airplanes have lavatories and/or galleys with potable water systems installed at Door 3.
*[2]  A clamshell coupling installation is correct if all of the following conditions apply: The clamshell coupling body is installed over the
tube/hose ferrules; the hose fitting O-ring is not visible; the clamshell coupling body is completely closed over the male hose and female
receptacle fittings; the clamshell coupling latch pawls (3 each) fully engage the coupling latch pins; the safety strap is fully engaged
over the ball located on the center latch pawl; the installed clamshell coupling assembly rotates 360 degrees with no binding during
full rotation.
*[3]  The detail inspection requirement specified by Boeing Alert Requirements Bulletin B787-81205-SB380021-00 RB at that location is
terminated.
*[4]  Correctly installing a clamshell coupling with a safety strap and making sure no leak is found, terminates the detail inspection requirement
specified by Boeing Alert Requirements Bulletin B787-81205-SB380021-00 RB at that location.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 5 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

In addition, the Manager of the FAA Continued Operational Safety Branch approves accomplishment of
the actions (i.e. inspection or modification) defined in Requirements Bulletin B787-81205-SB250299-00 RB
as an alternative method of compliance to the accomplishment of actions in Requirements Bulletin
B787-81205-SB380021-00 RB as required by paragraph (g) of AD 2023-08-04. Actions required by paragraph
(g) of AD 2023-08-04 must be accomplished within 180 days of the effective date of AD 2023-08-04. All
provisions of AD 2023-08-04 that are not specifically referenced in the above statement remain fully applicable
and must be complied with.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 6 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any figures identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified figures, can still be done as specified, and the airplane can be put back in an
airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
5. A Detailed Inspection is defined as: An intensive examination of a specific item, installation
or assembly to detect damage, failure or irregularity. This could include tactile assessment
in which a component or assembly can be checked for tightness/security. Available
lighting is normally supplemented with a direct source of good lighting at an intensity
deemed appropriate. Inspection aids such as mirrors and magnifying lenses may be
necessary. Surface cleaning and elaborate access procedures may be required.
6. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
8. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 7 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

9. The CONDITIONS, ACTIONS and OPTIONS shown apply to each lavatory and galley
independently.
10. Use of colors in Tasks is based on guidance from the S1000D International specification
for technical publications.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Table 1  Lavatory and Galley Clamshell Coupling Safety Strap Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB250299-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 1: DEPRESSURIZE
POTABLE WATER SYS-
TEM
--ALL AIRPLANES
PART 2: OPEN ACCESS
-Task 1ACTION 1: Do a detailed
inspection of all clamshell
couplings at Door 1 and
Door 3 lavatories and gal-
leys with potable water
system for a safety strap
and that clamshell coupling
with a safety strap is cor-
rectly installed. *[1]*[2]
--No further action neces-
sary.*[3]
CONDITION 1: SAFETY
STRAP FOUND ON ALL
CLAMSHELL COU-
PLINGS AND CORRECT-
LY INSTALLED.
PART 3: PRESSURIZE
POTABLE WATER SYS-
TEM
--
PART 5: CLOSE ACCESS--
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 8 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Table 1  Lavatory and Galley Clamshell Coupling Safety Strap Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB250299-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
-Task 2ACTION 1: At all affected
location(s), correctly install
clamshell coupling with
safety strap.*[4]
CONDITION 2: ANY IN-
CORRECTLY INSTALLED
LAVATORY AND GALLEY
CLAMSHELL COUPLING
WITH SAFETY STRAP
FOUND. PART 4: TEST-ACTION 2: At all affected
location(s), do a leak test.
If a leak is found, do appli-
cable corrective action.
Repeat the leak test and
make sure no leak is
found.*[4]
PART 5: CLOSE ACCESS--
-Task 3ACTION 1: At all affected
location(s), replace with
clamshell coupling with
safety strap.*[4]
CONDITION 3: ANY
LAVATORY AND GALLEY
CLAMSHELL COUPLING
WITHOUT SAFETY
STRAP FOUND.
PART 4: TEST-ACTION 2: At all affected
location(s), do a leak test.
If a leak is found, do appli-
cable corrective action.
Repeat the leak test and
make sure no leak is
found.*[4]
PART 5: CLOSE ACCESS--
*[1]  Not all airplanes have lavatories and/or galleys with potable water systems installed at Door 3.
*[2]  A clamshell coupling installation is correct if all of the following conditions apply: The clamshell coupling body is installed over the
tube/hose ferrules; the hose fitting O-ring is not visible; the clamshell coupling body is completely closed over the male hose and female
receptacle fittings; the clamshell coupling latch pawls (3 each) fully engage the coupling latch pins; the safety strap is fully engaged
over the ball located on the center latch pawl and; the installed clamshell coupling assembly rotates 360 degrees with no binding during
full rotation.
*[3]  The detail inspection requirement specified by Boeing Alert Requirements Bulletin B787-81205-SB380021-00 RB at that location is
terminated.
*[4]  Correctly installing a clamshell coupling with a safety strap and making sure no leak is found, terminates the detail inspection requirement
specified by Boeing Alert Requirements Bulletin B787-81205-SB380021-00 RB at that location.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 9 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Task 1 – POTABLE WATER SYSTEM CLAMSHELL COUPLING DETAILED
INSPECTION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 10 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11 (OCR)

@ BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
MALE END LINE
MALE-FEMALE CONNECTION
O-RING -  (TYPICAL)
FEMALE END LINE
FERRULE
• SAFETY STRAP
LATCH
LATCH
SAFETY
STRAP  LATCH
BALL
1) CLAMSHELL
COUPLING
• INSPECTION AREA  3021466
ICN-B787-A-000061-A-81205-18561-A-01-1
Figure 1
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 11 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 12 (OCR)

A BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
SAFETY
STRAP
BALL  SAFETY STRAP
LATCH  _ATCH
PIN ~
BONDING SPRING  BONDING SPRING
FERRULE  FERRULE
O-RING
SAFETY
STRAP
BALL
LATCH  SAFETY STRAP
•PIN
BONDING SPRING  BONDING SPRING
FERRULE-  —FERRULE
O-RING
B-B
_ SAFETY STRAP PARTIALLY SHOWN FOR CLARITY
ICN-B787-A-000061-A-81205-18797-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for each location.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 12 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 13

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]*[4]*[5]*[6]*[7]1-CLAMSHELL COU-
PLING
Inspect1
*[1]  Do a detailed inspection of the potable water system clamshell couplings for a safety strap.
*[2]  Make sure the clamshell coupling body is installed over the tube/hose ferrules.
*[3]  Make sure the hose fitting o-ring is not visible.
*[4]  Make sure the clamshell coupling body is completely closed over the male hose and female receptacle fittings.
*[5]  Make sure the clamshell coupling latch pawls (3 each) fully engage the coupling latch pins.
*[6]  Make sure the safety strap is fully engaged over the ball located on the center latch pawl.
*[7]  Make sure the installed clamshell coupling assembly rotates 360 degrees. Make sure no binding exists during full rotation. Use CAUTION
not to inadvertently disengage the latch pawls during this step. Angular alignment of the Male-Female connection lines may cause
pre-loading of the clamshell coupling during rotation. Clamshell coupling pre-loading may be relieved by holding the alignment of the
connection lines during rotation as needed.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 13 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

Task 2 – POTABLE WATER SYSTEM CLAMSHELL COUPLING CORRECT
INSTALLATION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 14 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15 (OCR)

@ BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
MALE END LINE
MALE-FEMALE CONNECTION
O-RING -  (TYPICAL)
FEMALE END LINE
FERRULE
• SAFETY STRAP
LATCH
• LATCH
SAFETY  STRAP  LATCH
BALL
OE CLAMSHELL
COUPLING
3025336
ICN-B787-A-000061-A-81205-18798-A-01-1
Figure 1
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 15 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 16 (OCR)

A BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
SAFETY
STRAP
BALL  SAFETY STRAP
LATCH  _ATCH
PIN ~
BONDING SPRING  BONDING SPRING
FERRULE  FERRULE
O-RING
SAFETY
STRAP
BALL
LATCH  SAFETY STRAP
•PIN
BONDING SPRING  BONDING SPRING
FERRULE-  —FERRULE
O-RING
B-B
_ SAFETY STRAP PARTIALLY SHOWN FOR CLARITY  3021468
ICN-B787-A-000061-A-81205-18799-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for each location.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 16 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 17

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]1-CLAMSHELL COU-
PLING
Remove / Keep1
*[1]*[2]*[3]*[4]*[5]*[6]*[7]*[8]*[9]1-CLAMSHELL COU-
PLING
Install (Kept)2
*[1]  Make sure NOT to disconnect hoses while replacing clamshells. If hoses are disconnected, replacement of o-rings is needed.
*[2]  Refer to 787 AMM 20-10-20 as an accepted procedure.
*[3]  Refer to SOPM 20-50-00 as an accepted procedure.
*[4]  Make sure the clamshell coupling body is installed over the tube/hose ferrules.
*[5]  Make sure the hose fitting o-ring is not visible.
*[6]  Make sure the clamshell coupling body is completely closed over the male hose and female receptacle fittings.
*[7]  Make sure the clamshell coupling latch pawls (3 each) fully engage the coupling latch pins.
*[8]  Make sure the safety strap is fully engaged over the ball located on the center latch pawl.
*[9]  Make sure the installed clamshell coupling assembly rotates 360 degrees. Make sure no binding exists during full rotation. Use CAUTION
not to inadvertently disengage the latch pawls during this step. Angular alignment of the Male-Female connection lines may cause
pre-loading of the clamshell coupling during rotation. Clamshell coupling pre-loading may be relieved by holding the alignment of the
connection lines during rotation as needed.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 17 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Task 3 – POTABLE WATER SYSTEM CLAMSHELL COUPLING
INSTALLATION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 18 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19 (OCR)

Q BOEING  Issue 001, 31 Jul 2023 12:00:00 AM  B787-81205-SB250299-00 RB
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
DOOR 1  DOOR 3
NOTE:
NOT ALL AIRPLANES HAVE
LAVATORIES INSTALLED AT DOOR 3.
LAVATORY WITH SINK ON ADJACENT WALL LOCATIONS
A-A
ICN-B787-A-000061-A-81205-18800-A-01-1
Figure 1
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 19 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 20

ICN-B787-A-000061-A-81205-18801-A-01-1
Figure 2
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 20 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 21 (OCR)

ABOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
VIEW LOOKING UP
TYPICAL
VIEW LOOKING UP  3030947
ICN-B787-A-000061-A-81205-18802-A-01-1
Figure 3
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 21 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 22

ICN-B787-A-000061-A-81205-18803-A-01-1
Figure 4
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 22 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 23 (OCR)

Q BOEING  Issue 001, 31 Jul 2023 12:00:00 AM  B787-81205-SB250299-00 RB
REQUIREMENTS BULLETIN
B
DOOR 1  DOOR 3
NOTE:
NOT ALL AIRPLANES HAVE
LAVATORIES INSTALLED AT DOOR 3.
LAVATORY WITH SINK ON OPPOSITE WALL LOCATIONS
B-B
ICN-B787-A-000061-A-81205-18804-A-01-1
Figure 5
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 23 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 24 (OCR)

BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
J
SINK
CABINET
TOILET H
LAVATORY
(SINK ON OPPOSITE WALL)
(TYPICAL)
ICN-B787-A-000061-A-81205-18805-A-01-1
Figure 6
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 24 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 25 (OCR)

A BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
VIEW LOOKING UP
VIEW LOOKING UP
TYPICAL
G  3030956
ICN-B787-A-000061-A-81205-18806-A-01-1
Figure 7
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 25 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 26 (OCR)

BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
TYPICAL
3030955
ICN-B787-A-000061-A-81205-18807-A-01-1
Figure 8
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 26 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 27 (OCR)

A BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
D
TYPICAL
TYPICAL
J  3030954
ICN-B787-A-000061-A-81205-18808-A-01-1
Figure 9
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 27 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 28 (OCR)

@BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
NOTE:
NOT ALL AIRPLANES HAVE
GALLEYS INSTALLED AT
DOOR 3.
DOOR 1  DOOR 3
L
GALLEY LOCATIONS
C-C
ICN-B787-A-000061-A-81205-18809-A-01-1
Figure 10
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 28 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 29 (OCR)

A BOEING
DOOR 1 GWDU INSTALLATION
(POTABLE WATER LOCATION)
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
3031430
ICN-B787-A-000061-A-81205-18810-A-01-1
Figure 11
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 29 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 30 (OCR)

BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
AFT OR FORWARD FACING GALLEY
(POTABLE WATER LOCATION)
SIDEWALL GALLEY
(POTABLE WATER LOCATION)
3031032
ICN-B787-A-000061-A-81205-18811-A-01-1
Figure 12
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 30 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 31 (OCR)

A BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
E
GALLEY PLUMBING CONFIGURATIONS
(TYPICAL)
D-D
ICN-B787-A-000061-A-81205-18812-A-01-1
Figure 13
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 31 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 32 (OCR)

@BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
GALLEY PLUMBING CONFIGURATION
(TYPICAL)
E-E
ICN-B787-A-000061-A-81205-18813-A-01-1
Figure 14
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 32 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 33 (OCR)

OBOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
BEFORE  AFTER
MALE-FEMALE CONNECTION  MALE-FEMALE CONNECTION
(TYPICAL)  (TYPICAL)
D
ICN-B787-A-000061-A-81205-18814-A-01-1
Figure 15
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 33 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 34 (OCR)

BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
BEFORE  AFTER
MALE-FEMALE CONNECTION  MALE-FEMALE CONNECTION
(TYPICAL)  (TYPICAL)
ICN-B787-A-000061-A-81205-18815-A-01-1
Figure 16
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 34 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 35 (OCR)

OBOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
BEFORE  AFTER
MALE-FEMALE CONNECTION  MALE-FEMALE CONNECTION
(TYPICAL)  (TYPICAL)
N
ICN-B787-A-000061-A-81205-18816-A-01-1
Figure 17
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 35 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 36 (OCR)

A BOEING  B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN
SAFETY
STRAP
BALL
SAFETY STRAP
LATCH  _ATCH
PIN ~
BONDING SPRING-  BONDING SPRING
FERRULE-  FERRULE
O-RING
F-F
SAFETY
STRAP
BALL
LATCH
SAFETY STRAP
•PIN
BONDING SPRING  BONDING SPRING
— FERRULE
O-RING
G-G
_ SAFETY STRAP PARTIALLY SHOWN FOR CLARITY  3030958
ICN-B787-A-000061-A-81205-18817-A-01-1
Figure 18
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for each location.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 36 of 37
Export Controlled ECCN: 9E991
See page 1 for details

### Page 37

Table 1  
More DataQtyIdentificationNameActionStep
*[1]114C02-08CCLAMSHELL COU-
PLING
Remove1
*[1]114C34-08CCLAMSHELL COU-
PLING
Install (New)2
*[2]*[3]*[4]1AS1655A08CLAMSHELL COU-
PLING
Remove3
*[2]*[3]*[4]*[5]*[6]*[7]*[8]*[9]*[10]114C33-08CLAMSHELL COU-
PLING
Install (New)4
*[11]114C02-08CCLAMSHELL COU-
PLING
Remove5
*[11]114C34-08CCLAMSHELL COU-
PLING
Install (New)6
*[1]  In accordance with Jamco Service Bulletin B80-25-4080, REV.-, dated February 28, 2023.
*[2]  Make sure NOT to disconnect hoses while replacing clamshells. If hoses are disconnected, replacement of o-rings is needed.
*[3]  Refer to 787 AMM 20-10-20 as an accepted procedure.
*[4]  Refer to SOPM 20-50-00 as an accepted procedure.
*[5]  Make sure the clamshell coupling body is installed over the tube/hose ferrules.
*[6]  Make sure the hose fitting o-ring is not visible.
*[7]  Make sure the clamshell coupling body is completely closed over the male hose and female receptacle fittings.
*[8]  Make sure the clamshell coupling latch pawls (3 each) fully engage the coupling latch pins.
*[9]  Make sure the safety strap is fully engaged over the ball located on the center latch pawl.
*[10]  Make sure the installed clamshell coupling assembly rotates 360 degrees. Make sure no binding exists during full rotation. Use CAUTION
not to inadvertently disengage the latch pawls during this step. Angular alignment of the Male-Female connection lines may cause
pre-loading of the clamshell coupling during rotation. Clamshell coupling pre-loading may be relieved by holding the alignment of the
connection lines during rotation as needed.
*[11]  In accordance with Jamco Service Bulletin B87-25-4079, REV.2, dated March 1, 2023.
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
Page 37 of 37
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250299-00 RB
Issue 001, 31 Jul 2023 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
