# Boeing Special Attention Requirements Bulletin B787-81205-SB250302-00 RB

Copy: Revision 001 ("B787-81205-SB250302-00 RB_001"), 18 pages: PDF https://openairdocs.org/files/sha256/87/20/87203b702dcbd47d8e91c6f13955df208abe8eba7ed67c162d11795e35c6170a; text https://openairdocs.org/service-documents/boeing/b787-81205-sb250302-00-rb/file/87203b702dcb.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0347; AD 2025-20-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Special Attention Requirements Bulletin)
- Number: B787-81205-SB250302-00 RB
- Latest revision known: B787-81205-SB250302-00 RB, Issue 001, dated August 21, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb250302-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-20-03](https://openairdocs.org/ad/2025-20-03.md), effective Nov 6, 2025: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb250302-00-rb/proposed.md).

## Text (18 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0347; AD 2025-20-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SPECIAL ATTENTION
Requirements Bulletin B787-81205-SB250302-00 RB EQUIPMENT AND
FURNISHINGS - Lavatories - Lavatory Lower Fitting Assemblies and
Centerline Partition Threshold Corrosion Inspection
Copyright © 2024 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 1 of 18
Export Controlled ECCN: 9E991
See page 1 for details
6.0
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 2 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT
IMMEDIATELY. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
Special Attention:
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND
THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN
"RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH
THE SB REFERS TO AS THE RELATED DOCUMENT.
A.
EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-101, 103-111, 113-
9900 in 4 Group(s). Where the effectivity is presented with hyphens between line numbers, the
airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers
1 through 9 inclusive.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8, 787-9 and 787-10 airplanes delivered on or before the Issue
001 date of this service bulletin equipped with Jamco family 95/96
lavatories
- 1
787-8, and 787-9 airplanes that have been modified to be equipped
with Jamco family 95/96 lavatories in accordance with Boeing Service
Bulletin B787-81205-SB250126-00, B787-81205-SB250137-00, B787-
81205-SB250187-00, B787-81205-SB250188-00, or B787-81205-
SB250189-00
- 2
787-8, 787-9 and 787-10 airplanes delivered on or before the Issue
001 date of this service Bulletin without Jamco family 95/96 lavatories
- 3
Airplanes not equipped with Jamco family 95/96 lavatories1
Airplanes modified to be equipped with Jamco family F95/96 lavatories
post-delivery
2
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 3 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8, 787-9 and 787-10 airplanes delivered after the Issue 001 date
of this service bulletin
- 4
Airplanes delivered with Jamco family 95/96 lavatories1
Airplanes delivered without Jamco family F95/96 lavatories and have
been modified to be equipped with Jamco family F95/96 lavatories
post-delivery
2
Airplanes not equipped with Jamco family 95/96 lavatories3
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
3ZA006
3ZA100 - ZA105
2ZA116 - ZA124
3ZA135 - ZA144
1ZA152 - ZA156
3ZA175 - ZA176
2ZA177 - ZA180
3ZA181 - ZA189
3ZA195 - ZA204
1ZA215 - ZA225
1ZA230 - ZA256
1ZA260 - ZA277
2ZA285 - ZA296
1ZA317 - ZA324
1ZA327
1ZA334 - ZA335
1ZA341 - ZA342
1ZA380 - ZA389
1ZA430 - ZA439
1ZA445 - ZA489
GroupVariable Number
1ZA506 - ZA516
1ZA536 - ZA545
3ZA560
1ZA561 - ZA567
1ZA578 - ZA580
3ZA586
1ZA588 - ZA593
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655
3ZA656
1ZA657 - ZA663
1ZA665 - ZA677
1ZA680 - ZA685
1ZA695 - ZA698
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
3ZA778 - ZA779
GroupVariable Number
1ZA783 - ZA784
3ZA817 - ZA831
2ZA839
3ZA841 - ZA842
1ZA846 - ZA848
1ZA853 - ZA862
4ZA863
1ZA864
1ZA873 - ZA876
1ZA881 - ZA888
3ZA916 - ZA920
1ZA949 - ZA950
1ZA954 - ZA959
1ZA963 - ZA966
3ZA968 - ZA972
1ZA980 - ZA981
1ZA990
1ZB001 - ZB012
3ZB021 - ZB043
3ZB047 - ZB061
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 4 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

GroupVariable Number
1ZB077 - ZB081
1ZB097 - ZB121
1ZB127 - ZB136
4ZB137
2ZB167 - ZB191
1ZB197 - ZB198
1ZB217
1ZB219 - ZB220
1ZB224 - ZB229
1ZB234 - ZB242
1ZB246 - ZB248
1ZB251 - ZB258
1ZB261 - ZB262
1ZB265 - ZB282
3ZB299
1ZB302 - ZB305
1ZB332 - ZB338
1ZB362 - ZB379
1ZB407 - ZB421
3ZB422 - ZB435
3ZB446 - ZB467
1ZB536 - ZB543
1ZB545 - ZB547
1ZB558 - ZB588
4ZB589
3ZB603 - ZB610
1ZB611 - ZB618
1ZB646 - ZB649
1ZB656 - ZB667
4ZB668
1ZB669
GroupVariable Number
1ZB676 - ZB681
1ZB688 - ZB702
3ZB703 - ZB707
1ZB733 - ZB735
1ZB738 - ZB740
1ZB742 - ZB745
1ZB749 - ZB750
4ZB751
1ZB753 - ZB757
1ZB763 - ZB769
3ZB771 - ZB774
1ZB775
1ZB778 - ZB821
1ZB828 - ZB841
4ZB842 - ZB845
3ZB858 - ZB863
1ZB874 - ZB876
1ZB887
1ZB890
1ZB893 - ZB902
4ZB903
1ZB904
4ZB905 - ZB907
1ZB908 - ZB919
4ZB920 - ZB921
1ZB922
1ZB924
1ZB926 - ZB927
1ZB934 - ZB954
4ZB955 - ZB962
1ZB967 - ZB971
GroupVariable Number
1ZB977 - ZB978
4ZB979
1ZB980 - ZB987
4ZB988 - ZB989
1ZB990 - ZB991
1ZB993 - ZB997
1ZC001 - ZC025
4ZC026 - ZC028
3ZC036 - ZC056
1ZC061 - ZC070
1ZC101 - ZC110
4ZC111 - ZC112
1ZC116 - ZC118
3ZC126 - ZC129
4ZC130
3ZC151 - ZC152
1ZC155 - ZC158
4ZC159 - ZC160
1ZC161 - ZC162
1ZC165
1ZC170 - ZC172
4ZC173 - ZC179
1ZC211 - ZC219
3ZC221 - ZC228
3ZC236 - ZC241
1ZC276
4ZC277 - ZC279
4ZC291 - ZC295
1ZC301 - ZC304
4ZC305 - ZC307
3ZD001 - ZD002
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 5 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

GroupVariable Number
1ZD003 - ZD008
3ZD009
3ZD012 - ZD029
4ZD038
1ZD048 - ZD049
1ZD053
1ZE001 - ZE010
1ZE013
4ZE014
1ZE016 - ZE017
4ZE018 - ZE019
1ZE031 - ZE032
1ZE040 - ZE045
4ZE046 - ZE047
1ZE048
1ZE075
1ZE085 - ZE086
1ZE090 - ZE091
1ZE095 - ZE097
4ZE098
1ZE100
GroupVariable Number
1ZE105 - ZE108
1ZE110 - ZE112
1ZE115
4ZE120
1ZE150
1ZE165 - ZE166
1ZE170 - ZE171
1ZE195 - ZE198
1ZE220 - ZE242
4ZE243 - ZE245
3ZE270 - ZE273
1ZE310 - ZE316
4ZE317 - ZE319
1ZE340 - ZE341
1ZE350 - ZE362
4ZE363 - ZE372
1ZE375
1ZE380 - ZE381
1ZE383 - ZE384
1ZE415 - ZE420
1ZE425 - ZE428
GroupVariable Number
1ZE435 - ZE437
3ZE455 - ZE456
1ZE481
1ZE486 - ZE488
1ZE491 - ZE493
4ZE494 - ZE497
4ZE506 - ZE516
1ZE517
4ZE518 - ZE520
4ZE581
4ZE586
1ZE601 - ZE602
4ZE641 - ZE651
4ZE696 - ZE699
4ZE726 - ZE727
4ZE746
4ZE756 - ZE757
4ZE781 - ZE783
4ZE971
4ZF001
4ZF041 - ZF042
2. Spares Affected
None.
B.
CONCURRENT REQUIREMENTS
Certain actions in the service bulletin specified below must be done as specified in Compliance and the
Accomplishment Instructions.
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 6 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

Table 3  
DescriptionService BulletinCompany
Inspection of Lower Fitting Assembly
Corrosion for Jamco Lavatory Mod-
ules on Boeing 787 Airplanes
B80-25-4112 Rev. 2, Dated April 24,
2024
Jamco Corporation
C.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB250302-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB250302-00 RB mandatory.
Accomplish the required action, based on the applicable condition in Table 6 through 10 as applicable in
accordance with the accomplishment instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1:
Table 6  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs later:At each Jamco lavatory
module with basic part
numbers P/N B80095() and
B80096() lavatory, do a
Detailed Inspection (DET)
of each of the eight lower
fitting assemblies and cen-
terline partition threshold
for corrosion.
ALL AIRPLANES
1. Within 72 months after
the date of issuance of
the original standard
Certificate of Airworthi-
ness or the original Ex-
port Certificate of Airwor-
thiness.
2. Within 38 months after
the Issue 001 date of
Requirements Bulletin
B787-81205-SB250302-
00 RB.
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 7 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

Group 1:
Table 6  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight after
accomplishing the DET
of the eight lower fitting
assemblies and center-
line partition threshold for
corrosion.
ACTION 1:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
CONDITION 1:
NO CORROSION FOUND
-ACTION 2:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
-Before further flight.ACTION 1:CONDITION 2:
Contact The Boeing Com-
pany for repair instructions
and do the repair.
ANY CORROSION
FOUND
-Before further flight, after
accomplishing the repair
instructions in Condition
2, Action 1.
ACTION 2:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
-ACTION 3:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
*[1]  
The term "lower fitting assemblies" is equivalent to the term "Vertical Side Forward (VSF) fittings".
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 8 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Group 2:
Table 7  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs later:At each Jamco lavatory
module with basic part
numbers P/N B80095() and
B80096() lavatory, do a
Detailed Inspection (DET)
of each of the eight lower
fitting assemblies and cen-
terline partition threshold
for corrosion.
ALL AIRPLANES
1. Within 72 months after
the date modification that
installs the lavatory mod-
ules with basic part num-
bers P/N B80095() and
B80096().
2. Within 38 months after
the Issue 001 date of
Requirements Bulletin
B787-81205-SB250302-
00 RB.
-Before further flight after
accomplishing the DET
of the eight lower fitting
assemblies and center-
line partition threshold for
corrosion.
ACTION 1:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
CONDITION 1:
NO CORROSION FOUND
-ACTION 2:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 9 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Group 2:
Table 7  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.ACTION 1:CONDITION 2:
Contact The Boeing Com-
pany for repair instructions
and do the repair.
ANY CORROSION
FOUND
-Before further flight, after
accomplishing the repair
instructions in Condition
2, Action 1.
ACTION 2:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
-ACTION 3:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
*[1]  
The term "lower fitting assemblies" is equivalent to the term "Vertical Side Forward (VSF) fittings".
Group 3, Configuration 1; Group 4, Configuration 3:
Table 8  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
--No further action required.ALL AIRPLANES WITH-
OUT JAMCO LAVATORY
MODULE WITH BASIC
PART NUMBERS P/N
B80095() AND B80096().
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 10 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Group 3-4, Configuration 2:
Table 9  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 72 months after
the date of modification
that installs the lavatory
modules with basic part
numbers P/N B80095()
and B80096().
At each Jamco lavatory
module with basic part
numbers P/N B80095() and
B80096() lavatory, do a
Detailed Inspection (DET)
of each of the eight lower
fitting assemblies and cen-
terline partition threshold
for corrosion.
ALL AIRPLANES
-Before further flight after
accomplishing the DET
of the eight lower fitting
assemblies and center-
line partition threshold for
corrosion.
ACTION 1:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
CONDITION 1:
NO CORROSION FOUND
-ACTION 2:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 11 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

Group 3-4, Configuration 2:
Table 9  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.ACTION 1:CONDITION 2:
Contact The Boeing Com-
pany for repair instructions
and do the repair.
ANY CORROSION
FOUND
-Before further flight, after
accomplishing the repair
instructions in Condition
2, Action 1.
ACTION 2:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
-ACTION 3:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
*[1]  
The term "lower fitting assemblies" is equivalent to the term "Vertical Side Forward (VSF) fittings".
Group 4, Configuration 1:
Table 10  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 72 months after
the date of issuance of
the original standard
Certificate of Airworthi-
ness or the original Ex-
port Certificate of Airwor-
thiness.
At each Jamco lavatory
module with basic part
numbers P/N B80095() and
B80096() lavatory, do a
Detailed Inspection (DET)
of each of the eight lower
fitting assemblies and cen-
terline partition threshold
for corrosion.
ALL AIRPLANES
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 12 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

Group 4, Configuration 1:
Table 10  LAVATORY LOWER FITTING AND CENTERLINE PARTITION THRESHOLD INSPECTION
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight after
accomplishing the DET
of the eight lower fitting
assemblies and center-
line partition threshold for
corrosion.
ACTION 1:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
CONDITION 1:
NO CORROSION FOUND
-ACTION 2:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
-Before further flight.ACTION 1:CONDITION 2:
Contact The Boeing Com-
pany for repair instructions
and do the repair.
ANY CORROSION
FOUND
-Before further flight, after
accomplishing the repair
instructions in Condition
2, Action 1.
ACTION 2:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
-ACTION 3:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
*[1]  
The term "lower fitting assemblies" is equivalent to the term "Vertical Side Forward (VSF) fittings".
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 13 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 14 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

E.    ACCOMPLISHMENT INSTRUCTIONS
1.
GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2.
This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Later approved software is only software that is approved by Boeing as a replacement
for the software specified in this bulletin and approved as part of the type design by the
Federal Aviation Administration (FAA) after issuance of this bulletin Original Issue date.
6. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 15 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16

– Angular tolerance is plus or minus 2 degrees
–
Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
7. A Detailed Inspection (DET) is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting is
normally supplemented with a direct source of good lighting at an intensity deemed ap-
propriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary.
Surface cleaning and elaborate procedures may be required.
8. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
9. Use of colors in Tasks is based on guidance from the S1000D International specification
for technical publications.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
11. The CONDITIONS, ACTIONS and OPTIONS shown apply to each lavatory independently.
2. WORK INSTRUCTIONS
Group 1-2; Group 3, Configuration 2; Group 4, Configuration 1-2:
A. Actions Required for Compliance
Group 1-2; Group 3, Configuration 2; Group 4, Configuration 1-2:
(1) Requirements
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 16 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 17

Group 1-2; Group 3, Configuration 2; Group 4, Configuration 1-2:
Table 1  LAVATORY LOWER FITTING AND CENTERLINE THRESHOLD INSPECTION
Refer to the listed proce-
dures in SB B787-81205-
SB250302-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-At each Jamco lavatory
module with basic part
numbers P/N B80095()
and B80096(), lavatory, do
a Detailed Inspection
(DET) of each of the eight
lower fitting assemblies
and the centerline partition
threshold for corrosion.
ALL AIRPLANES
-Jamco SB B80-25-4112
Rev 2, dated April 24,
2024, Accomplishment In-
structions Paragraph 3.A.
step (3).
--ACTION 1:CONDITION 1:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
NO CORROSION FOUND
-Jamco SB B80-25-4112
Rev 2, dated April 24,
2024, Accomplishment In-
structions Paragraph 3.C.
ACTION 2:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard.
PART 2: CLOSE ACCESS--
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 17 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Group 1-2; Group 3, Configuration 2; Group 4, Configuration 1-2:
Table 1  LAVATORY LOWER FITTING AND CENTERLINE THRESHOLD INSPECTION
Refer to the listed proce-
dures in SB B787-81205-
SB250302-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 3: CONTACT BOE-
ING
-ACTION 1:
Contact the Boeing Compa-
ny for repair instructions
and do the repair.
CONDITION 2:
ANY CORROSION
FOUND
-Jamco SB B80-25-4112
Rev 2, dated April 24,
2024, Accomplishment In-
structions Paragraph 3.C.
ACTION 2:
Record the Jamco service
bulletin number and com-
pletion date on the Modifi-
cation Record Placard. PART 2: CLOSE ACCESS-
--ACTION 3:
Incorporate into the opera-
tors maintenance program
the MAINTENANCE RE-
VIEW BOARD REPORT
(MRBR) item number 25-
185-00 Task Inspect (De-
tailed) lavatory Vertical
Side Forward (VSF) fittings
for corrosion, or dam-
age.*[1]
*[1]  
The term "lower fitting assemblies" is equivalent to the term "Vertical Side Forward (VSF) fittings".
Group 3, Configuration 1; Group 4, Configuration 3:
Table 2  LAVATORY LOWER FITTING AND CENTERLINE THRESHOLD INSPECTION
Refer to the listed proce-
dures in SB B787-81205-
SB250302-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
--No further action required.ALL AIRPLANES WITH-
OUT JAMCO LAVATORY
MODULE WITH BASIC
PART NUMBERS P/N
B80095() AND B80096().
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00
AM
Page 18 of 18
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB250302-00 RB
Issue 001, 21 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
