# Boeing Service Bulletin B787-81205-SB270044-00

Copy: SB-787-27A0044-03-- ("SB-787-27A0044-03--"), 44 pages: PDF https://openairdocs.org/files/sha256/92/fe/92fe40686f1b8bb87749c6ae84650582d78994886f39248b68627c864e1c4898; text https://openairdocs.org/service-documents/boeing/b787-81205-sb270044-00/file/92fe40686f1b.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-0674; AD 2023-19-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB270044-00
- Latest revision known: B787-81205-SB270044-00, Issue 003, dated July 7, 2020 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb270044-00

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-19-09](https://openairdocs.org/ad/2023-19-09.md), effective Nov 6, 2023: Revisions 001, 002 and 003
- [AD 2020-20-09](https://openairdocs.org/ad/2020-20-09.md), effective Nov 13, 2020: Revision 003

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/boeing/b787-81205-sb270044-00/proposed.md).

## Text (44 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-0674; AD 2023-19-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Service Bulletin B787-81205-SB270044-00 FLIGHT CONTROLS -
General - Flight Control Electronics Common Block Point 5 Software
Change
Issue 003, 07 Jul 2020B787-81205-SB270044-00Publication:
Copyright © 2018 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8, 787-9 Airplanes. Refer to Data Module SB B787-A-27-00-0044-00A-932A-D, Paragraph 1., Effectivity
for the list of affected airplanes.
B787-81205-SB270044-00TITLE PAGE
Issue 003, 07 Jul 2020
Page 1 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
2.0
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 2

Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B. Spares Aff ected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B. Data Supplied with this Ser vice Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . 12
C. Installation Requirement Modules Used in the Prepar ation of this Ser vice Bulletin: . . . 12
11. Publications Aff ected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . 12
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. Industry Suppor t Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. Kits/Parts: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Parts and Materials Supplied by the Operator: . . . . . . . . . . . . . . . . . . . . . . . 15
C. Parts Modified and Reidentified: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
D. Parts Removed and Not Replaced: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. Special Tooling Necessary to do this Ser vice Bulletin  . . . . . . . . . . . . . . . . . . . . . 16
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Appendix A – POST SOFTW ARE INSTALLATION TASKS [Group 1:] . . . . . . . . . . . . . . . . . . . . 31
B787-81205-SB270044-00TABLE OF CONTENTS
Issue 003, 07 Jul 2020
Page 2 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 3

Alert Service Bulletin B787-81205-SB270044-00
List of Effective Data Modules
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Description
Group 1:
Table 1  List of Effective Data Modules - Alert Service Bulletin B787-81205-SB270044-00
Issue DateIssue StatusIssueData Module – Information Name
2020-07-07Changed003B787-A-27-00-0044-00A-00SA-D – List of Effective Data Modules
2020-07-07Changed002B787-A-27-00-0044-00A-931B-D – Revision Transmittal Information
2020-07-07Changed003B787-A-27-00-0044-00A-932A-D – PLANNING INFORMATION
2020-07-07Changed003B787-A-27-00-0044-00A-934A-D – MATERIAL INFORMATION
2020-07-07Changed003B787-A-27-00-0044-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
2020-07-07Changed002B787-A-27-00-0044-0AA-931D-D – Appendix A – POST SOFTWARE IN-
STALLATION TASKS [Group 1:]
B787-A-27-00-0044-00A-00SA-DApplicable To:
Issue 003, 07 Jul 2020End of data moduleModel 787
See Applicability of this data module
Page 3 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 4

Alert Service Bulletin B787-81205-SB270044-00
Revision Transmittal Information
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
References
TitleReference
AirplanesSB B787-A-27-00-0044-00A-932A-D Issue 003,
Paragraph 1.A.
Description
Group 1:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
RC: Start
Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM) NPRM 2019-NM-097-AD
is related to Requirements Bulletin B787-81205-SB270044-00 RB.
Airplane line number 688 was removed from this bulletin effectivity.
Effects of this revision on Airplanes on which Issue 001 of the Requirements Bulletin B787-81205-SB270044-
00 RB was previously done:
None
RC: End
2. REASON FOR REVISION
RC: Start
This issue is sent to remove airplane line number 688 from this bulletin effectivity. The change provided by
this service bulletin will be made to airplane line number 688 during production. Also, NPRM 2019-NM-097-
AD has been added.
These sections were changed:
B787-A-27-00-0044-00A-931B-DApplicable To:
Issue 002, 07 Jul 2020Model 787
See Applicability of this data module
Page 4 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 5

- In Effectivity of the Requirements Bulletin, updated the effectivity paragraph.
RC: End
- In Effectivity of the Service Bulletin, updated the effectivity and Change notice paragraphs.
- In Reason, added reason for revision statement.
- In Description, updated effect of revision statement.
RC: Start
- In Compliance of the Requirements Bulletin, added FAA NPRM.
RC: End
- In Compliance of the Service Bulletin, added FAA NPRM.
RC: Start
- In Approval of the Requirements Bulletin, updated alternative method of compliance paragraphs.
RC: End
- In References, A. Existing Data, updated references.
Change marks are added, except in Data Module SB B787-A-27-00-0044-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
3. REVISION HISTORY
Table 1  
Requirement Bulletin
787-27A0044 RB
Issue Date
Requirement Bulletin
787-27A0044 RB
Service Bulletin
787-27A0044
Issue Date
Service Bulletin
787-27A0044
December 18, 2018Issue 1:December 18, 2018Issue 1:
December 18, 2018Issue 1:November 20, 2019Issue 2:
July 07, 2020Issue 2:July 07, 2020Issue 3:
B787-A-27-00-0044-00A-931B-DApplicable To:
Issue 002, 07 Jul 2020End of data moduleModel 787
See Applicability of this data module
Page 5 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 6

Alert Service Bulletin B787-81205-SB270044-00
PLANNING INFORMATION
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
References
TitleReference
FLIGHT CONTROLS - Primary Flight Control
Function - Flight Control Electronics Common Block
Point 3 Software Change
SB B787-81205-SB270039-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
NOSE WHEEL STEERING TILLER MODULE787 AMM 32-51-01
GENERAL PROCESSOR MODULE787 AMM 42-21-02
CENTRAL MAINTENANCE COMPUTING
FUNCTION
787 AMM 45-11-00
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
COMMUNICATIONS - Data Communication
Management Function - Communication Management
SB B787-81205-SB230030-00
Function Block Point 5 Operational Program Software
Change
INTEGRATED MODULAR AVIONICS - Common
Core System - General Processor Module Operational
Program Software Change
SB B787-81205-SB420020-00
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 6 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 7

Description
Group 1:
1. Effectivity
A. Airplanes
RC: Start
This bulletin is applicable to 787-8, 787-9 Airplane(s), line number(s) 6-527, 529-547, 549-564, 566-621,
623-655, 657-671, 673-685, 687, 689-696, 698-708, 710-730, 732-742, 744-753, 755-762, 764-765, 767,
769, 771 in 1 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
RC: End
The Variable Numbers and Group information for the applicable airplanes is given below. Refer to CN-
AA69365E for data about this change.
RC: Start
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 and 787-9 Airplanes required to install Flight Control Electronics
(FCE) Common Block Point 5 Software.
-1
787-8 and 787-9 Airplanes with Central Maintenance Computing
Function (CMCF) database part number BCG4A-45LD-0050 installed.
1
787-8 and 787-9 Airplanes with CMCF database part number BCG4B-
45LD-0051, BCG48-45LD-0052, BCG49-45LD-0053, BCG4E-45LD-
0054 or BCG4F-45LD-0055 installed.
2
787-8 and 787-9 Airplanes with CMCF database part number BCG41-
45LD-0068 installed.
3
Airplane Models: 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100-ZA105
1ZA116-ZA124
1ZA135-ZA144
1ZA152-ZA156
1ZA175-ZA189
1ZA195-ZA204
1ZA215-ZA225
GroupVariable Number
1ZA230-ZA256
1ZA260-ZA277
1ZA285-ZA296
1ZA317-ZA324
1ZA327
1ZA334-ZA335
1ZA341-ZA342
1ZA380-ZA389
GroupVariable Number
1ZA430-ZA439
1ZA445-ZA489
1ZA506-ZA516
1ZA536-ZA545
1ZA560-ZA567
1ZA576-ZA580
1ZA586
1ZA588-ZA593
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 7 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 8

GroupVariable Number
1ZA610-ZA617
1ZA650-ZA652
1ZA655-ZA663
1ZA665-ZA677
1ZA680-ZA685
1ZA695-ZA698
1ZA715-ZA716
1ZA718-ZA719
1ZA740-ZA741
1ZA768-ZA769
1ZA778-ZA779
1ZA783-ZA784
1ZA817-ZA831
1ZA839
1ZA841-ZA842
1ZA846-ZA848
1ZA853-ZA862
1ZA873-ZA874
1ZA881-ZA888
1ZA916-ZA920
1ZA949-ZA950
1ZA954
1ZA958
1ZA972
1ZB001-ZB012
1ZB021-ZB043
1ZB047-ZB060
GroupVariable Number
1ZB077-ZB081
1ZB097-ZB112
1ZB127-ZB134
1ZB167-ZB191
1ZB197-ZB198
1ZB217
1ZB219-ZB220
1ZB224-ZB229
1ZB234-ZB242
1ZB246-ZB248
1ZB251-ZB258
1ZB261-ZB262
1ZB265-ZB274
1ZB299
1ZB302-ZB305
1ZB332-ZB334
1ZB362-ZB379
1ZB407-ZB418
1ZB422-ZB429
1ZB446-ZB465
1ZB536-ZB543
1ZB545-ZB547
1ZB558-ZB584
1ZB603-ZB618
1ZB646-ZB649
1ZB656-ZB663
1ZB676-ZB681
GroupVariable Number
1ZB688-ZB707
1ZB733-ZB735
1ZB738-ZB739
1ZB742-ZB743
1ZB753-ZB756
1ZB763-ZB768
1ZB771-ZB772
1ZB775
1ZB778-ZB800
1ZB812-ZB820
1ZB828-ZB835
1ZB858-ZB862
1ZB874-ZB876
1ZB893-ZB896
1ZB908
1ZB910-ZB914
1ZB924
1ZB934
1ZB980
1ZB997
1ZD001-ZD009
1ZD012
1ZE001
1ZE003
1ZE013
1ZE031
--
RC: End
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 8 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN
Table 2

### Page 9

RC: Start
B. Spares Affected
None.
RC: End
RC: Start
2. Concurrent Requirements
The service bulletin listed below must be done before this service bulletin.
Group 1, Configuration 1:
Table 3  
DependencyDescriptionService BulletinCompany
FLIGHT CONTROLS -Primary
Flight Control Function - Flight
Control Electronics Common
Block Point 3 Software Change
SB B787-81205-SB270039-00
Issue 001 or Issue 002
Boeing
Group 1, Configuration 2-3:
None.
RC: End
Group 1:
3. Reason
This service bulletin gives instructions to install new Flight Control Module (FCM) Operational Program
Software (OPS), FCM Loadable Diagnostic Information (LDI) Database (DB), FCM Compatibility (CMPT)
DB and FCM Air Data Reference Function (ADRF) DB software available as Flight Control Electronics
(FCE) Common Block Point 5 (CBP5). The new software removes nuisance flap/slat control caution mes-
sages and reduces nuisance faults from the Horizontal Stabilizer Trim Actuator (HSTA) Primary No-Back
Brake (NBB) Functional Test. The nuisance flap/slat control caution Engine Indicating and Crew Alerting
System (EICAS) messages during push back cause in-service delays. A ground test must be accomplished
to clear the nuisance EICAS message. If the software change in this service bulletin is not done, nuisance
faults from the NBB test and flat/slat caution EICAS messages will continue.
The 787 Air Data Reference Function was modified to allow the use of the Total Air Temperature (TAT)
Probe data independent of its heater status. There are no changes to the TAT Probe heater fault message
logic. As a result of this change, revisions will be made to the 787 Master Minimum Equipment List (MMEL)
and Dispatch Deviation Guide (DDG) that will allow dispatch with the TAT Probe heater failed.
Boeing Fleet Team Digest (FTD) 787-FTD-22-17001 and 787-FTD-27-17004 is related to this service bulletin.
The new software will change the operational procedures for the airplane. Refer to Paragraph 13., Software
Accomplishment Summary for more data about these changes.
Boeing Service Related Problems (SRP) 787 SRP-22-0045 and 787 SRP-27-0280 are related to this service
bulletin.
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 9 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 10

Issue 003 is sent to remove airplane line number 688 from this service bulletin effectivity. The change
provided by this service bulletin will be made to airplane line number 688 during production. Also, NPRM
2019-NM-097-AD has been added.
4. Description
Install and test new FCE common block point 5 software and do a configuration check.
Effects of this revision on Airplanes on which Issue 001 or Issue 002 of the Service Bulletin B787-81205-
SB270044-00 was previously done:
None
The work in this service bulletin is done in the maintenance zone(s) given below.
Table 4  
Affected Maintenance Zones
ZoneModel
117, 118, 145, 146787-8, 787-9
RC: Start
5. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2015-14-07 is related to Requirements
Bulletin B787-81205-SB270044-00 RB. The effective date of AD 2015-14-07 is August 20, 2015.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2016-24-09 is related to Requirements
Bulletin B787-81205-SB270044-00 RB. The effective date of AD 2016-24-09 is December 2, 2016.
Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2019-NM-097-AD, is related
to Requirements Bulletin B787-81205-SB270044-00 RB.
Do the required actions, based on the applicable action(s) in Table 5, in accordance with Accomplishment
Instructions.
Table 5  Common Block Point 5 Software Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 12 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB270044-00 RB.
Install Common Block
Point 5 (CBP5) 27 Flight
Control Module (FCM)
Operational Program Soft-
ware (OPS).
All Airplanes
RC: End
6. Approval
This service bulletin was examined by the Boeing Commercial Airplanes (BCA) Organization Designation
Authorization (ODA). The changes specified in this service bulletin comply with the applicable regulations
and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 10 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 11

(JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service
bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as
modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
7. Manpower
The table below shows an estimate of the task hours necessary to do this software change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task
hour data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
Table 6  
Elapsed HoursTask HoursNumber of Per-
sons
Task
2.02.01Install and Check
Software
2.02.0TOTAL FOR EACH AIRPLANE
This estimate gives general service bulletin incorporation time. The specific software data transfer times
can change the estimate given in the table.
Group 1, Configuration 1:
This estimate does not include the task hour data given in the service bulletins in Paragraph 2., Concurrent
Requirements.
Group 1:
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA69365B, CN-AA69365E
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 11 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 12

2. Aircraft Maintenance Manual (AMM) 787 AMM 24-22-00, 787 AMM 32-51-01, 787 AMM 42-21-
02, 787 AMM 45-11-00, 787 AMM 45-13-00, 787 AMM 46-13-00
3. Boeing Fleet Team Digest (FTD) 787-FTD-22-17001 and 787-FTD-27-17004.
4. Boeing Requirement Bulletin (RB) B787-81205-SB270044-00 RB.
5. Boeing Service Bulletin (SB) SB B787-81205-SB230030-00, SB B787-81205-SB270039-00, SB
B787-81205-SB420020-00
6. Boeing Service Letter (SL) 787-SL-00-003.
7. Boeing Service Related Problem (SRP) 787 SRP-22-0045, 787 SRP-27-0280
8. Federal Aviation Administration (FAA) Airworthiness Directive (AD) AD 2015-14-07, AD 2016-24-
09
9. Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM) NPRM 2019-NM-
097-AD
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 7  
Chapter-SectionPublication
27-00787 Fault Isolation Manual
CH 4 - Automatic Flight787 Flight Crew Operations Manual
46-12787 Illustrated Parts Data
30-33787 Master Minimum Equipment List
30-33787 Dispatch Deviation Guide
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs or changes in this service bulletin for effects on Fatigue Critical Structure
(FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This
service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
13. Software Accomplishment Summary
1. System / Systems affected by this change: Flight Computer Electronics (FCE)
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 12 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 13

2. Software changes which affect operational procedures: None.
3. Other software improvements: None.
B787-A-27-00-0044-00A-932A-DApplicable To:
Issue 003, 07 Jul 2020End of data moduleModel 787
See Applicability of this data module
Page 13 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 14

Alert Service Bulletin B787-81205-SB270044-00
MATERIAL INFORMATION
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
References
TitleReference
ReferencesSB B787-A-27-00-0044-00A-932A-D Issue 003,
Paragraph 10.
Description
Group 1:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane.
1. For Boeing provided Loadable Software (LSW) part numbers, order the LSW part number as follows:
Reference this service bulletin and submit your purchase order by one of these methods.
A. Order on-line via ATA Spec 2000 or The Boeing PART Page
B. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION.
Operators must order each instance of the Loadable Software (LSW) part numbers in Table 1 - Loadable
Software Attributes as shown in Paragraph 3.B., Parts and Materials Supplied by the Operator. The LSW
provider information is available in the Notes column of the Loadable Software Attributes Table.
2. Industry Support Information
Boeing warranty remedies are available for 787 airplanes in warranty as of January 13, 2017. For man-hour
reimbursement for airplanes in warranty as of that date, send a warranty claim to BCA Contracts - Warranty.
The software referenced in this service bulletin will be provided at no charge through Boeing Electronic
Distribution of Software (BEDS).The warranty remedies will expire eight years from the original release date
of this service bulletin.
B787-A-27-00-0044-00A-934A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 14 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 15

3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
To get the parts/materials shown below, refer to Paragraph 1., Material - Price and Availability.
Table 1  Loadable Software Attributes
NotesSoftware Part NomenclatureSystem NamePart Number
*[1]27 FCM ADRF DBFlight Control Electronics (FCE)
System
HNP20-AD0E-5003
*[2]27 FCM LDI DBFlight Control Electronics (FCE)
System
HNP58-AD09-5025
*[3]27 FCM CMPT DBFlight Control Electronics (FCE)
System
HNP5A-AD04-5008
*[4]*[5]27 FCM OPSFlight Control Electronics (FCE)
System
HNP5D-AL01-5031
*[1]  Boeing provided loadable software. Reference part number HNP20AD0E5003 for ordering purposes.
*[2]  Boeing provided loadable software. Reference part number HNP58AD09-5025 for ordering purposes.
*[3]  Boeing provided loadable software. Reference part number HNP5AAD04-5008 for ordering purposes.
*[4]  Boeing provided loadable software. Reference part number HNP5DAL01-5031 for ordering purposes.
*[5]  Or later approved software part number. Later approved software is only software that is approved by Boeing as a replacement
for the software specified in this bulletin and approved as part of type design by the Federal Aviation Administration (FAA) after
issuance of this bulletin Issue 001 date.
Group 1, Configuration 1-2:
Table 2  Loadable Software Attributes
NotesSoftware Part NomenclatureSystem NamePart Number
*[1]45 LDI DBCentral Maintenance Comput-
ing Function (CMCF)
BCG4C-45LD-0056
*[1]  Boeing provided loadable software. Reference part number BCG4C45LD0056 for ordering purposes.
Group 1, Configuration 3:
Table 3  Loadable Software Attributes
NotesSoftware Part NomenclatureSystem NamePart Number
*[1]45 LDI DBCentral Maintenance Comput-
ing Function (CMCF)
BCG40-45LD-0069
*[1]  Boeing provided loadable software. Reference part number BCG40-45LD0069 for ordering purposes.
B787-A-27-00-0044-00A-934A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 15 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 16

Group 1:
C. Parts Modified and Reidentified:
None.
D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-27-00-0044-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-27-00-0044-00A-934A-DApplicable To:
Issue 003, 07 Jul 2020End of data moduleModel 787
See Applicability of this data module
Page 16 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 17

Alert Service Bulletin B787-81205-SB270044-00
ACCOMPLISHMENT INSTRUCTIONS
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
References
TitleReference
ReferencesSB B787-A-27-00-0044-00A-932A-D Issue 003,
Paragraph 10.
Alert Service Bulletin
B787-81205-SB270044-00 – Appendix A – POST
SOFTWARE INSTALLATION TASKS [Group 1:]
SB B787-A-27-00-0044-0AA-931D-D Issue 002
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
CENTRAL MAINTENANCE COMPUTING
FUNCTION
787 AMM 45-11-00
COMMUNICATIONS - Data Communication
Management Function - Communication Management
SB B787-81205-SB230030-00
Function Block Point 5 Operational Program Software
Change
GENERAL PROCESSOR MODULE787 AMM 42-21-02
INTEGRATED MODULAR AVIONICS - Common
Core System - General Processor Module Operational
Program Software Change
SB B787-81205-SB420020-00
Procedure
Group 1:
1. GENERAL INFORMATION
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 17 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 18

KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: RC: Start
1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthi-
ness Directive (AD), then all applicable requirements specified in the RB must be done. For the
related SB, some locations are marked RC Start and RC End to identify the requirements that
are restated from the RB. For the related SB, the areas between RC Start and RC End, including
sub-steps and any tasks identified between RC Start and RC End, must be done to comply with
the AD. Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations
to steps between RC Start and RC End, including sub steps and identified tasks. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted methods
in accordance with the operator's maintenance or inspection program without obtaining approval
of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps
and identified tasks, can still be done as specified, and the airplane can be put back in an air-
worthy condition. Tasks not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document.The Boeing processes used to create
the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between
"RC Start" and "RC End" in the SB are identical to the information in the same sections (Com-
pliance, Work Instructions...) of the RB which the SB refers to as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
5. Later approved software is only software that is approved by Boeing as a replacement for the
software specified in this bulletin and approved as part of type design by the Federal Aviation
Administration (FAA) after issuance of this bulletin Issue 001 date.
RC: End
6. Refer to 787 AMM 45-13-00 as an accepted procedure for the Onboard Data Load Function
(ODLF) and the software check.
7. Refer to 787 AMM 46-13-00 as an accepted procedure to stage software on a Mass Storage
Device (MSD).
8. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-27-00-0044-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
9. Obey all of the warnings and cautions given in the specified manual sections.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 18 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 19

10. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
11. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
12. Make sure there are no pre-existing system faults on the airplane that may impact software
loading. If faults are present, troubleshoot and clear before installing the new software given in
this service bulletin to help ensure a successful software load.
13. Boeing recommends installing new software using the Maintenance Laptop (ML) instead of the
Multi-Function Display (MFD) or Electronic Flight Bag (EFB). Using the ML will help reduce
complications in case of loss of displays during software installation, as well as faster load times.
14. Make sure all precondition steps are met before the software installation when using the Onboard
Data Load Function (ODLF). If a failure occurs, select the "FAIL REASON" for more information,
perform corrective actions, and install the software again.
15. The acronym "SLID" in the software attributes tables stands for "Software Location Identification".
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 19 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 20

2. WORK INSTRUCTIONS
RC: Start
A. Actions Required for Compliance
Requirements(1)
Table 1  Common Block Point 5 Software Installation
Refer to the listed
procedures in SB
B787-81205-
SB270044-00 Issue
001 or later approved
issues as an accept-
ed procedure
Method of ComplianceActionCondition
PART 1: PREPARE
AIRPLANE AND
STAGE SOFTWARE
TO MASS STORAGE
DEVICES
-Install Common Block
Point 5 (CBP5) 27
Flight Control Mod-
ule(FCM) Operational
Program Software
(OPS).
All Airplanes
PART 2: INSTALL
NEW SOFTWARE
Install Flight Control Module (FCM)
Operational Program Software
(OPS) software Part Number:
HNP5D-AL01-5031 or later ap-
proved software Part Number.
Do software configuration check to
make sure the software configura-
tion is correct. If the software config-
uration is not correct, do corrective
action(s) until the software configu-
ration is correct.
PART 3: PERFORM
SYSTEM TESTS
-
RC: End
B. PART 1: PREPARE AIRPLANE AND STAGE SOFTWARE TO MASS STORAGE DEVICES
Supply electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted procedure.(1)
(a) Make sure airplane has stable electrical power (two 90 KVA stingers preferred) that will not be
interrupted during software installation.
(b) Make sure the Auxiliary Power Unit (APU) power is switched off.
(2) Make sure the Central Maintenance Computer (CMC) switch control operation can switch between
both the left and right CMC before installing any software. Refer to 787 AMM 45-11-00 as an accepted
procedure.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 20 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 21

(3) Make sure each of the software configurations given in Table 2 or Table 3 are correct. Refer to "How
to Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an ac-
cepted procedure.
Group 1, Configuration 1-2:
Table 2  
NotesData Load Des-
tination
Software Part NomenclatureSystem NamePart Number
*[2]*[3]*[1]23 CMF OPSCommunications Manage-
ment Function (CMF)
HNP5D-AL21-5011
*[2]*[3]*[4]23 CMF OPS UADF DBCommunications Manage-
ment Function (CMF)
HNP51-AD22-5007
*[2]*[3]*[6]45 LDI DBCentral Maintenance Comput-
ing Function (CMCF)
*[5]
*[1]  Installed at CCR GPM-L8 (SLID: LS1966348), CCR GPM-R8 (SLID: LS1687273).
*[2]  This software was installed in SB B787-81205-SB230030-00 Issue 001 or 002, or during production under Change Notice CN-
AA61184.
*[3]  This is the minimum version of the software required to incorporate this service bulletin. Operators are responsible for determining
if different part numbers of this software have been installed by other Boeing service bulletins prior to this service bulletin.
*[4]  Installed at GGM-1 (SLID: LS1854933), GGM-2 (SLID: LS1294977), GGM-3 (SLID: LS1025067), GGM-4 (SLID: LS1495089).
*[5]  BCG4E-45LD-0054, BCG4F-45LD-0055.
*[6]  Installed at CCR GPM-L7 (SLID: LS1696327), CCR GPM-R7 (SLID: LS1267201), CIS MS FSM-2 (SLID: LS1455153), CIS MS FSM-
1 (SLID: LS1205130).
Group 1, Configuration 3:
Table 3  
NotesData Load Des-
tination
Software Part NomenclatureSystem NamePart Number
*[2]*[3]*[1]45 LDI DBCentral Maintenance Comput-
ing Function (CMCF)
BCG41-45LD-0068
*[1]  Installed at CCR GPM-L7 (SLID: LS1696327), CCR GPM-R7 (SLID: LS1267201), CIS MS FSM-2 (SLID: LS1455153), CIS MS FSM-
1 (SLID: LS1205130).
*[2]  This software was installed in production under Change Notice CN-AA63623.
*[3]  This is the minimum version of the software required to incorporate this service bulletin. Operators are responsible for determining
if different part numbers of this software have been installed by other Boeing service bulletins prior to this service bulletin.
Group 1:
(4) Stage new software on the Mass Storage Device (MSD) in accordance with the Loadable Software
Attributes table below. Refer to 787 AMM 46-13-00 as an accepted procedure.
NOTE: This Mass Storage Device (MSD) staging step and AMM procedure is provided for reference
only. The MSDs are used to store Loadable Software Airplane Parts (LSAPs) as a conve-
nience to operators and minimize operational impacts of unscheduled maintenance. It is
not a Boeing or regulatory requirement to stage or maintain (i.e. maintain in a specific con-
figuration) LSAPs on the MSDs. Operators can use their own procedure to stage LSAPs
on MSDs.
Boeing recommends that operators maintain the latest airplane configuration LSAPs on the
MSDs to make available if loadable LRU maintenance is required in the event of planned
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 21 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 22

/ unplanned component change. Refer to Boeing Service Letter 787-SL-00-003 for more
information.
Table 4  Loadable Software Attributes
NotesSoftware Loca-
tion Identifica-
tion
Staging Destina-
tion
Software Part
Nomenclature
System NamePart Number
*[1]*[2]*[3]LS1185146CIS MS FSM
MSD-1
27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]*[2]LS1185146CIS MS FSM
MSD-1
27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]*[2]LS1185146CIS MS FSM
MSD-1
27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]*[2]LS1185146CIS MS FSM
MSD-1
27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]*[2]*[3]LS1765187CIS MS FSM
MSD-2
27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]*[2]LS1765187CIS MS FSM
MSD-2
27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]*[2]LS1765187CIS MS FSM
MSD-2
27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]*[2]LS1765187CIS MS FSM
MSD-2
27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
*[3]  Or later approved software part number.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 22 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 23

Group 1, Configuration 1-2:
Table 5  Loadable Software Attributes
NotesSoftware Loca-
tion Identifica-
tion
Staging Destina-
tion
Software Part
Nomenclature
System NamePart Number
*[1]*[2]LS1185146CIS MS FSM
MSD-1
45 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG4C-45LD-0056
*[1]*[2]LS1765187CIS MS FSM
MSD-2
45 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG4C-45LD-0056
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
Group 1, Configuration 3:
Table 6  Loadable Software Attributes
NotesSoftware Loca-
tion Identifica-
tion
Staging Destina-
tion
Software Part
Nomenclature
System NamePart Number
*[1]*[2]LS1185146CIS MS FSM
MSD-1
45 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]*[2]LS1765187CIS MS FSM
MSD-2
45 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
Group 1:
C. PART 2: INSTALL NEW SOFTWARE
Install each instance of the software listed in the Loadable Software Attributes table below to the
Left Flight Control Module (FCM) using the On-Board Data Load Function (ODLF). Refer to 787
(1)
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 23 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 24

AMM 45-13-00 as an accepted procedure. If the software load fails, do corrective actions and repeat
the software load until the software load passes.
Table 7  Loadable Software Attributes
ODLF LOAD SESSION # 01
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]*[2]LS1731825FCM-L27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1731825FCM-L27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]LS1731825FCM-L27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]LS1731825FCM-L27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  Or later approved software part number.
(2) Make sure each software configuration given in Table 7 is correct. Refer to "How to Find the Con-
figuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted procedure.
(a) If software configuration is incorrect, do corrective action(s) and repeat the software configuration
check until the software configuration is correct.
(3) Install each instance of the software listed in the Loadable Software Attributes table below to the
right and center FCMs using the ODLF. Refer to 787 AMM 45-13-00 as accepted procedure. If the
software load fails, do corrective actions and repeat the software load until the software load
passes.
Table 8  Loadable Software Attributes
ODLF LOAD SESSION # 02
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]*[2]LS1071950FCM-R27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1071950FCM-R27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 24 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 25

Table 8  Loadable Software Attributes
ODLF LOAD SESSION # 02
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1071950FCM-R27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]LS1071950FCM-R27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]*[2]LS1521993FCM-C27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1521993FCM-C27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]LS1521993FCM-C27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]LS1521993FCM-C27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  Or later approved software part number.
(4) Make sure each software configuration given in Table 8 is correct. Refer to "How to Find the Con-
figuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted procedure.
(a) If software configuration is incorrect, do corrective action(s) and repeat the software configuration
check until the software configuration is correct.
(5) Make sure the Central Maintenance Computer (CMC) is under control of the right CMC. If the CMC
is not under control of the right CMC, switch CMC control to the right CMC. Refer to 787 AMM 45-
11-00 as an accepted procedure.
(6) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 and 787 AMM 42-21-02 as accepted procedures.
NOTE: It is recommended to load GPMs in one cabinet first and when completed, load the GPM
in the other cabinet. Loading the GPMs concurrently can result in the CCRs re-sync issue.
Data load (DL) history may be deleted after loading LDIs on GPMs, so the verification of
DL history should be done separately for the LDI load on each GPM.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 25 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 26

Group 1, Configuration 1-2:
Table 9  Loadable Software Attributes
ODLF LOAD SESSION # 03
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1696327CCR GPM-L745 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG4C-45LD-0056
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1, Configuration 3:
Table 10  Loadable Software Attributes
ODLF LOAD SESSION # 03
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1696327CCR GPM-L745 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1:
(7) Make sure each software configuration given in Table 9 or Table 10 is correct. Refer to "How to
Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
(a) If software configuration is incorrect, do corrective action(s) and repeat the software configuration
check until the software configuration is correct.
(8) Switch CMC control to the left CMC. Refer to 787 AMM 45-11-00 as an accepted procedure.
(9) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 and 787 AMM 42-21-02 as accepted procedures.
NOTE: It is recommended to load GPMs in one cabinet first and when completed, load the GPM
in the other cabinet. Loading the GPMs concurrently can result in the CCRs re-sync issue.
Data load (DL) history may be deleted after loading LDIs on GPMs, so the verification of
DL history should be done separately for the LDI load on each GPM.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 26 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 27

Group 1, Configuration 1-2:
Table 11  Loadable Software Attributes
ODLF LOAD SESSION # 04
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1267201CCR GPM-R745 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG4C-45LD-0056
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1, Configuration 3:
Table 12  Loadable Software Attributes
ODLF LOAD SESSION # 04
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1267201CCR GPM-R745 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1:
(10) Make sure each software configuration in Table 11 or Table 12 is correct. Refer to "How to Find
the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
(a) If software configuration is incorrect, do corrective action(s) and repeat the software configuration
check until the software configuration is correct.
(11) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 as an accepted procedure.
NOTE: If the FSM-2 is installed on the airplane. A reset will occur, causing loss of maintenance
laptop session and ODLF. Reset duration is approximately 10 minutes.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 27 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 28

Group 1, Configuration 1-2:
Table 13  Loadable Software Attributes
ODLF LOAD SESSION # 05
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1455153CIS MS FSM-245 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG4C-45LD-0056
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1, Configuration 3:
Table 14  Loadable Software Attributes
ODLF LOAD SESSION # 05
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1455153CIS MS FSM-245 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1:
(12) Make sure each software configuration in Table 13 or Table 14 is correct. Refer to "How to Find
the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
(a) If software configuration is incorrect, do corrective action(s) and repeat the software configuration
check until the software configuration is correct.
(13) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 as an accepted procedure.
NOTE: A reset will occur, causing loss of maintenance laptop session and ODLF. Reset duration
is approximately 10 minutes.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 28 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 29

Group 1, Configuration 1-2:
Table 15  Loadable Software Attributes
ODLF LOAD SESSION # 06
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1205130CIS MS FSM-145 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG4C-45LD-0056
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1, Configuration 3:
Table 16  Loadable Software Attributes
ODLF LOAD SESSION # 06
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1205130CIS MS FSM-145 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
Group 1:
(14) Make sure each software configuration in Table 15 or Table 16 is correct. Refer to "How to Find
the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
(a) If software configuration is incorrect, do corrective action(s) and repeat the software configuration
check until the software configuration is correct.
D. PART 3: PERFORM SYSTEM TESTS
Do the Central Maintenance Computing Function (CMCF) General Processor Module File System
Erase Ground Test procedure for GPM-L7 and GPM-R7 one GPM at a time. Refer to Data Module
Appendix A, SB B787-A-27-00-0044-0AA-931D-D as an accepted procedure.
(1)
NOTE: Use a Maintenance Laptop (ML) to execute each GPM file system erase ground test.
NOTE: Do not use the Electronic Flight Bag (EFB) or a Multi-Function Display (MFD) to execute
the GPM file system erase ground test.
NOTE: Only perform the General Processor Module File System Erase Ground Test on one GPM
at a time.
(2) Do the Post Software Installation - GPM Error Correction Code (ECC) Refresh procedure. Refer to
787 AMM 42-21-02 as an accepted procedure.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020Model 787
See Applicability of this data module
Page 29 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 30

NOTE: The Post Software Installation - GPM Error Correction Code (ECC) Refresh is not required
for airplanes that have Common Core System (CCS) 8.1L or later approved software in-
stalled, refer to service bulletin SB B787-81205-SB420020-00.
(3) Do the Post Software Installation - Airplane Condition Monitoring Function (ACMF) Synchronization
procedure. Refer to Data Module Appendix A, SB B787-A-27-00-0044-0AA-931D-D as an accepted
procedure.
(4) Do the Nosewheel Steering System Left and Right Tiller and Rudder Pedal Disconnect Switch Cali-
bration procedure. Refer to Data Module Appendix A, SB B787-A-27-00-0044-0AA-931D-D as an
accepted procedure.
(5) Do the General Processor Module LRU Replacement Ground Test procedure for GPM-L7 and GPM-
R7 one GPM at a time. Refer to Data Module Appendix A, SB B787-A-27-00-0044-0AA-931D-D as
an accepted procedure.
(6) Put the airplane back to a serviceable condition.
B787-A-27-00-0044-00A-933A-DApplicable To:
Issue 003, 07 Jul 2020End of data moduleModel 787
See Applicability of this data module
Page 30 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 31

Alert Service Bulletin B787-81205-SB270044-00
Appendix A – POST SOFTWARE INSTALLATION TASKS [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
References
TitleReference
GENERAL PROCESSOR MODULE787 AMM 42-21-02
NOSE WHEEL STEERING TILLER MODULE787 AMM 32-51-01
Procedure
Group 1:
1. GENERAL PROCESSOR MODULE FILE SYSTEM ERASE GROUND TEST
The following is an acceptable procedure extracted from 787 AMM 42-21-02.NOTE:
NOTE: All post-software installation tasks should be performed using the Maintenance Laptop (ML).
NOTE: Perform the following tests in the order listed below. If software is installed to GPM-L7 and GPM-
R7, the File System Erase Ground test must be run for GPM-L7 and GPM-R7.
A. Start this Central Maintenance Computing Function (CMCF) ground test: 42 Common Computing Resource
- Left CCR, LRU Replacement, Left 7 GPM File System Erase.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: It is recommended to use the ML to start the ground test. Do not use the Electronic Flight
Bag (EFB).
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the Common Computing Resource cabinet or airplane within this 30 min-
utes.
NOTE: Do not run the File System Erase Ground Test for both GPM L7 and GPM R7 at the same
time.
B787-A-27-00-0044-0AA-931D-DApplicable To:
Issue 002, 07 Jul 2020Model 787
See Applicability of this data module
Page 31 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 32

B. Start this CMCF ground test: 42 Common Computing Resource - Right CCR, LRU Replacement, Right
7 GPM File System Erase.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: It is recommended to use the ML to start the ground test. Do not use the Electronic Flight
Bag (EFB).
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the Common Computing Resource cabinet or airplane within this 30 min-
utes.
NOTE: Do not run the File System Erase Ground Test for both GPM-L7 and GPM-R7 at the same
time.
2. ACMF SYNCHRONIZATION
The following is an acceptable procedure extracted from 787 AMM 42-21-02.NOTE:
A. Start this CMCF ground test: 42 Common Computing Resource - Right CCR, LRU Replacement test,
Right 1 GPM.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
3. NOSEWHEEL STEERING SYSTEM LEFT AND RIGHT TILLER AND RUDDER PEDAL DISCONNECT
SWITCH CALIBRATION
NOTE: The following is an acceptable procedure extracted from 787 AMM 32-51-01.
A. Start this CMCF ground test: 32 Nosewheel Steering System, LRU Replacement, Nose Wheel Steering
System (NWSS) Left Tiller Replacement & Calibration.
NOTE: Do not touch the Tiller handles during the calibration.
NOTE: It is recommended to use the maintenance laptop to start the ground test. Do not use the
Electronic Flight Bag (EFB).
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
B. Start this CMCF ground test: 32 Nosewheel Steering System, LRU Replacement, NWSS Right Tiller
Replacement & Calibration.
NOTE: Do not touch the Tiller handles during the calibration.
NOTE: It is recommended to use the maintenance laptop to start the ground test. Do not use the
Electronic Flight Bag (EFB).
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
C. To calibrate the captain's rudder pedal disconnect switch. Do these steps:
(1) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
B787-A-27-00-0044-0AA-931D-DApplicable To:
Issue 002, 07 Jul 2020Model 787
See Applicability of this data module
Page 32 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 33

(2) Release the rudder pedal disconnect switch.
(a) Make sure that "OFF" shows for the "CAPT RPDS SW" for SYS 1 and SYS 2 on the "LNDG
GEAR INDN AND STRNG" maintenance page.
(3) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(a) Make sure that ON shows for the CAPT RPDS SW for SYS 1 and SYS 2 on the LNDG GEAR
INDN AND STRNG maintenance page.
(4) Release the rudder pedal disconnect switch.
(5) Turn the captain's steering tiller to 70 degrees to the left.
(a) Look for this indication on the "LNDG GEAR INDN AND STRNG" maintenance page.
1) "CAPT TILLER" shows 69 degrees to 71 degrees to the left for SYS 1 and SYS 2.
(6) Turn the captain's steering tiller to 70 degrees to the right.
(a) Look for this indication on the "LNDG GEAR INDN AND STRNG" maintenance page.
1) "CAPT TILLER" shows 69 degrees to 71 degrees to the right for SYS 1 and SYS 2.
D. To calibrate the first officer's rudder pedal disconnect switch. Do these steps.
(1) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(2) Release the rudder pedal disconnect switch.
(a) Make sure that "OFF" shows for the "FO RPDS SW" for SYS 1 and SYS 2 on the "LNDG GEAR
INDN AND STRNG" maintenance page.
(3) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(a) Make sure that ON shows for the F/O RPDS SW for SYS 1 and SYS 2 on the LNDG GEAR
INDN AND STRNG maintenance page.
(4) Release the rudder pedal disconnect switch.
(5) Turn the first officer's steering tiller to 70 degrees to the left.
(a) Look for this indication on the "LNDG GEAR INDN AND STRNG" maintenance page.
1) "F/O TILLER" shows 69 degrees to 71 degrees to the left for SYS 1 and SYS 2.
(6) Turn the first officer's steering tiller to 70 degrees to the right.
(a) Look for this indication on the "LNDG GEAR INDN AND STRNG" maintenance page.
1) "F/O TILLER" shows 69 degrees to 71 degrees to the right for SYS 1 and SYS 2.
4. GENERAL PROCESSOR MODULE LRU REPLACEMENT GROUND TEST
The following is an acceptable procedure extracted from 787 AMM 42-21-02.NOTE:
NOTE: All post-software installation tasks should be performed using the ML.
A. Start this CMCF ground test: 42 Common Computing Resource (CCR) - Left CCR, LRU Replacement,
Left 7 GPM.
B787-A-27-00-0044-0AA-931D-DApplicable To:
Issue 002, 07 Jul 2020Model 787
See Applicability of this data module
Page 33 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 34

(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the Common Computing Resource cabinet or airplane within this 30 min-
utes.
B. Start this CMCF ground test: 42 Common Computing Resource (CCR) - Right CCR, LRU Replacement,
Right 7 GPM.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the Common Computing Resource cabinet or airplane within this 30 min-
utes.
B787-A-27-00-0044-0AA-931D-DApplicable To:
Issue 002, 07 Jul 2020End of data moduleModel 787
See Applicability of this data module
Page 34 of 34
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00
Issue 003, 07 Jul 2020
AIRCRAFT SERVICE BULLETIN

### Page 35

Alert Requirements Bulletin B787-81205-SB270044-00 RB FLIGHT
CONTROLS - General - Flight Control Electronics Common Block Point 5
Software Change
Copyright © 2018 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 1 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
2.0
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 36

Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B. CONCURRENT REQ UIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. General Inf ormation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 2 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 37

Alert Requirements Bulletin B787-81205-SB270044-00 RB FLIGHT
CONTROLS - General - Flight Control Electronics Common Block Point 5
Software Change
Revision Transmittal Information
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
This revision includes all pages of the requirements bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Notice of Proposed Rule Making (NPRM) NPRM 2019-NM-097-AD
is related to Requirements Bulletin B787-81205-SB270044-00 RB.
Airplane line number 688 was removed from this bulletin effectivity.
Effects of this revision on Airplanes on which Issue 001 of the Requirements Bulletin B787-81205-SB270044-
00 RB was previously done:
None
2. REASON FOR REVISION
This issue is sent to remove airplane line number 688 from this bulletin effectivity. The change provided by
this service bulletin will be made to airplane line number 688 during production. Also, NPRM 2019-NM-097-
AD has been added.
These sections were changed:
- In Effectivity of the Requirements Bulletin, updated the effectivity paragraph.
- In Compliance of the Requirements Bulletin, added FAA NPRM.
- In Approval of the Requirements Bulletin, updated alternative method of compliance paragraphs.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 3 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 38

3. REVISION HISTORY
Table 1  
Service BulletinService BulletinRequirement BulletinRequirement Bulletin
787-27A0044787-27A0044787-27A0044 RB787-27A0044 RB
Issue DateIssue Date
December 18, 2018Issue 1:December 18, 2018Issue 1:
November 20, 2019Issue 2:December 18, 2018Issue 1:
July 07, 2020Issue 3:July 07, 2020Issue 2:
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 4 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 39

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9 Airplane(s), line number(s) 6-527, 529-547, 549-564,
566-621, 623-655, 657-671, 673-685, 687, 689-696, 698-708, 710-730, 732-742, 744-753, 755-
762, 764-765, 767, 769, 771 in 1 Group(s).Where the effectivity is presented with hyphens between
line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9
means line numbers 1 through 9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 and 787-9 Airplanes required to install Flight Control Electronics
(FCE) Common Block Point 5 Software.
-1
787-8 and 787-9 Airplanes with Central Maintenance Computing
Function (CMCF) database part number BCG4A-45LD-0050 installed.
1
787-8 and 787-9 Airplanes with CMCF database part number BCG4B-
45LD-0051, BCG48-45LD-0052, BCG49-45LD-0053, BCG4E-45LD-
0054 or BCG4F-45LD-0055 installed.
2
787-8 and 787-9 Airplanes with CMCF database part number BCG41-
45LD-0068 installed.
3
Airplane Models: 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA144
1ZA152 - ZA156
1ZA175 - ZA189
GroupVariable Number
1ZA195 - ZA204
1ZA215 - ZA225
1ZA230 - ZA256
1ZA260 - ZA277
1ZA285 - ZA296
1ZA317 - ZA324
GroupVariable Number
1ZA327
1ZA334 - ZA335
1ZA341 - ZA342
1ZA380 - ZA389
1ZA430 - ZA439
1ZA445 - ZA489
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 5 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 40

GroupVariable Number
1ZA506 - ZA516
1ZA536 - ZA545
1ZA560 - ZA567
1ZA576 - ZA580
1ZA586
1ZA588 - ZA593
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655 - ZA663
1ZA665 - ZA677
1ZA680 - ZA685
1ZA695 - ZA698
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA831
1ZA839
1ZA841 - ZA842
1ZA846 - ZA848
1ZA853 - ZA862
1ZA873 - ZA874
1ZA881 - ZA888
1ZA916 - ZA920
1ZA949 - ZA950
1ZA954
1ZA958
GroupVariable Number
1ZA972
1ZB001 - ZB012
1ZB021 - ZB043
1ZB047 - ZB060
1ZB077 - ZB081
1ZB097 - ZB112
1ZB127 - ZB134
1ZB167 - ZB191
1ZB197 - ZB198
1ZB217
1ZB219 - ZB220
1ZB224 - ZB229
1ZB234 - ZB242
1ZB246 - ZB248
1ZB251 - ZB258
1ZB261 - ZB262
1ZB265 - ZB274
1ZB299
1ZB302 - ZB305
1ZB332 - ZB334
1ZB362 - ZB379
1ZB407 - ZB418
1ZB422 - ZB429
1ZB446 - ZB465
1ZB536 - ZB543
1ZB545 - ZB547
1ZB558 - ZB584
1ZB603 - ZB618
1ZB646 - ZB649
GroupVariable Number
1ZB656 - ZB663
1ZB676 - ZB681
1ZB688 - ZB707
1ZB733 - ZB735
1ZB738 - ZB739
1ZB742 - ZB743
1ZB753 - ZB756
1ZB763 - ZB768
1ZB771 - ZB772
1ZB775
1ZB778 - ZB800
1ZB812 - ZB820
1ZB828 - ZB835
1ZB858 - ZB862
1ZB874 - ZB876
1ZB893 - ZB896
1ZB908
1ZB910 - ZB914
1ZB924
1ZB934
1ZB980
1ZB997
1ZD001 - ZD009
1ZD012
1ZE001
1ZE003
1ZE013
1ZE031
--
2. Spares Affected
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 6 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 41

None.
B. CONCURRENT REQUIREMENTS
The service bulletin listed below must be done before this service bulletin.
Group 1, Configuration 1:
Table 3  
DependencyDescriptionService BulletinCompany
FLIGHT CONTROLS -Primary
Flight Control Function - Flight
Control Electronics Common
Block Point 3 Software Change
SB B787-81205-SB270039-00
Issue 001 or Issue 002
Boeing
Group 1, Configuration 2-3:
None.
C. COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2015-14-07 is related to Requirements
Bulletin B787-81205-SB270044-00 RB. The effective date of AD 2015-14-07 is August 20, 2015.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2016-24-09 is related to Requirements
Bulletin B787-81205-SB270044-00 RB. The effective date of AD 2016-24-09 is December 2, 2016.
Federal Aviation Administration (FAA) Notice of Proposed Rule Making NPRM 2019-NM-097-AD, is related
to Requirements Bulletin B787-81205-SB270044-00 RB.
Do the required actions, based on the applicable action(s) in Table 5, in accordance with Accomplishment
Instructions.
Table 5  Common Block Point 5 Software Installation
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 12 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB270044-00 RB.
Install Common Block
Point 5 (CBP5) 27 Flight
Control Module (FCM) Op-
erational Program Software
(OPS).
All Airplanes
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 7 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 42

D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity.This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the action (i.e.
inspection or modification) defined in this Requirements Bulletin revision as an alternative method of
compliance to the requirements of paragraph (g) and (h) of AD 2015-14-07. All provisions of AD 2015-14-07
that are not specifically referenced in the above statement remain fully applicable and must be complied
with accordingly.
In addition, the Manager of the FAA Seattle ACO Branch approves accomplishment of the action (i.e.
inspection or modification) defined in this Requirements Bulletin revision as an alternative method of
compliance to the requirements of paragraph (g) of AD 2016-24-09. All provisions of AD 2016-24-09 that
are not specifically referenced in the above statement remain fully applicable and must be complied with
accordingly.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 8 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 43

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document.There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any tasks identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including sub steps and identified tasks. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified tasks, can still be done as specified, and the airplane can be put back in an
airworthy condition. Tasks not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
5. Later approved software is only software that is approved by Boeing as a replacement
for the software specified in this bulletin and approved as part of type design by the
Federal Aviation Administration (FAA) after issuance of this bulletin Issue 001 date.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
Requirements(1)
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 9 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

### Page 44

Table 1  Common Block Point 5 Software Installation
Refer to the listed
procedures in SB
B787-81205-
SB270044-00 Issue
001 or later approved
issues as an accepted
procedure
Method of ComplianceActionCondition
PART 1: PREPARE
AIRPLANE AND
STAGE SOFTWARE
TO MASS STORAGE
DEVICES
-Install Common Block
Point 5 (CBP5) 27
Flight Control Mod-
ule(FCM) Operational
Program Software
(OPS).
All Airplanes
PART 2: INSTALL
NEW SOFTWARE
Install Flight Control Module (FCM)
Operational Program Software
(OPS) software Part Number:
HNP5D-AL01-5031 or later ap-
proved software Part Number.
Do software configuration check to
make sure the software configura-
tion is correct. If the software config-
uration is not correct, do corrective
action(s) until the software configu-
ration is correct.
PART 3: PERFORM
SYSTEM TESTS
-
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
Page 10 of 10
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB270044-00 RB
Issue 002, 07 Jul 2020
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
