# Boeing Service Bulletin B787-81205-SB270046-00

Copy: SB-787-27-0046-02-- ("SB-787-27-0046-02--"), 23 pages: PDF https://openairdocs.org/files/sha256/37/c1/37c12dc47a25a5d6a5b8ccb863e6f302db47f3a11869680e63a2fa205254a31a; text https://openairdocs.org/service-documents/boeing/b787-81205-sb270046-00/file/37c12dc47a25.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-0674; AD 2023-19-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB270046-00
- Latest revision known: B787-81205-SB270046-00, Issue 002, dated October 24, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb270046-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2023-19-09](https://openairdocs.org/ad/2023-19-09.md), effective Nov 6, 2023: Revisions 001 and 002

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb270046-00/proposed.md).

## Text (23 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2022-0674; AD 2023-19-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin B787-81205-SB270046-00 FLIGHT CONTROLS - General -
Flight Control Electronics Common Block Point 5 Software Change
Issue 002, 24 Oct 2019B787-81205-SB270046-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2018 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-10 Airplanes. Refer to Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 1., Effectivity for the
list of affected airplanes.
B787-81205-SB270046-00TITLE PAGE
Issue 002, 24 Oct 2019
Page 1 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 2

Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B. Spares Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
A. Existing Data:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
B. Data Supplied with this Service Bulletin:  . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  . . . . 9
11. Publications Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Industry Support Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A. Kits/Parts:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B. Parts and Materials Supplied by the Operator:  . . . . . . . . . . . . . . . . . . . . . . . 11
C. Parts Modified and Reidentified:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
D. Parts Removed and Not Replaced:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. Special Tooling Necessary to do this Service Bulletin  . . . . . . . . . . . . . . . . . . . . . 12
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Appendix A – POST SOFTWARE INSTALLATION TASKS [Group 1:]. . . . . . . . . . . . . . . . . . . . 21
B787-81205-SB270046-00TABLE OF CONTENTS
Issue 002, 24 Oct 2019
Page 2 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 3

Service Bulletin B787-81205-SB270046-00
List of Effective Data Modules
Description
Group 1:
Table 1  List of Effective Data Modules - Service Bulletin B787-81205-SB270046-00
Issue DateIssue StatusIssueData Module – Information Name
2019-10-24Changed002B787-A-27-00-0046-00A-00SA-D – List of Effective Data Modules
2019-10-24New001B787-A-27-00-0046-00A-931B-D – Revision Transmittal Information
2019-10-24Changed002B787-A-27-00-0046-00A-932A-D – PLANNING INFORMATION
2019-10-24Changed002B787-A-27-00-0046-00A-934A-D – MATERIAL INFORMATION
2019-10-24Changed002B787-A-27-00-0046-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
2019-10-24New001B787-A-27-00-0046-0AA-931D-D – Appendix A – POST SOFTWARE IN-
STALLATION TASKS [Group 1:]
B787-A-27-00-0046-00A-00SA-DApplicable To:
Issue 002, 24 Oct 2019End of data moduleModel 787
See Applicability of this data module
Page 3 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 4

Service Bulletin B787-81205-SB270046-00
Revision Transmittal Information
References
TitleReference
ReasonSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 3.
DescriptionSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 4.
Existing DataSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 10.A.
Publications AffectedSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 11.
Interchangeability and Intermixability of PartsSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 12.
Work InstructionsSB B787-A-27-00-0046-00A-933A-D Issue 002, Step 2.
Service Bulletin
B787-81205-SB270046-00 – Appendix A – POST
SOFTWARE INSTALLATION TASKS [Group 1:]
SB B787-A-27-00-0046-0AA-931D-D Issue 001
AirplanesSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 1.A.
Description
Group 1:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this revision on Airplanes on which Issue 001 was previously done:
None
2. REASON FOR REVISION
This issue is sent to add Total Air Temperature (TAT) probe heater failure information, to update publications
affected, to update interchangeability and intermixability information, and to clarify work instructions which
will support incorporation of this service bulletin without complications.
These sections were changed:
1. Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 3., Reason - Added information on TAT
probe heater failure and reason for revision.
B787-A-27-00-0046-00A-931B-DApplicable To:
Issue 001, 24 Oct 2019Model 787
See Applicability of this data module
Page 4 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 5

2. Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 4., Description - Added effects of this re-
vision on airplanes on which Issue 001 was previously done.
3. Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 10.A., Existing Data - Reference List up-
dated.
4. Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 11., Publications Affected - Updated
publication affected table.
5. Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 12., Interchangeability and Intermixability
of Parts - Information updated.
6. Data Module SB B787-A-27-00-0046-00A-933A-D, Step 2., Work Instructions - Updated post software
installation requirements and added additional system tests.
7. Data Module Appendix A, SB B787-A-27-00-0046-0AA-931D-D - Added post software installation tasks.
Change marks are added, except in Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
3. REVISION HISTORY
Table 1  
November 30, 2018Issue 1:
October 24, 2019Issue 2:
B787-A-27-00-0046-00A-931B-DApplicable To:
Issue 001, 24 Oct 2019End of data moduleModel 787
See Applicability of this data module
Page 5 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 6

Service Bulletin B787-81205-SB270046-00
PLANNING INFORMATION
References
TitleReference
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
NOSE WHEEL STEERING TILLER MODULE787 AMM 32-51-01
GENERAL PROCESSOR MODULE787 AMM 42-21-02
CENTRAL MAINTENANCE COMPUTING
FUNCTION
787 AMM 45-11-00
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
Description
Group 1:
1. Effectivity
A. Airplanes
This bulletin is applicable to 787-10 Airplane(s), line number(s) 528, 548, 565, 622, 656, 672, 686, 697, 709,
743, 763, 770 in 1 Group(s).
The Variable Numbers and Group information for the applicable airplanes is given below. An equivalent
change is on subsequent production airplanes. Refer to CN-AA69365C for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-10 Airplanes required to install Flight Control Electronics (FCE)
Common Block Point 5 Software.
-1
Airplane Models: 787-10
Table 2
GroupVariable Number
1ZC001-ZC008
1ZC036
GroupVariable Number
1ZC038
1ZC061
GroupVariable Number
1ZC063
--
B787-A-27-00-0046-00A-932A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 6 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 7

B. Spares Affected
None.
2. Concurrent Requirements
None.
3. Reason
This service bulletin gives instructions to install new Flight Control Module (FCM) Operational Program
Software (OPS), FCM Loadable Diagnostic Information (LDI) Database (DB) and FCM Compatibility (CMPT)
DB software available as Flight Control Electronics (FCE) Common Block Point 5 (CBP5). The new software
removes nuisance flap/slat control caution messages. The nuisance flap/slat control caution Engine Indi-
cating and Crew Alerting System (EICAS) messages during push back causes in-service delays. A ground
test must be accomplished to clear the nuisance EICAS message. If the software change in this service
bulletin is not done, nuisance faults from the flat/slat caution EICAS messages will continue to disrupt
normal flight operations.
The 787 Air Data Reference Function was modified to allow the use of the Total Air Temperature (TAT)
Probe data independent of its heater status. There are no changes to the TAT Probe heater fault message
logic. As a result of this change, revisions will be made to the 787 Master Minimum Equipment List (MMEL)
and Dispatch Deviation Guide (DDG) that will allow dispatch with the TAT Probe heater failed.
Boeing Fleet Team Digest (FTD) 787-FTD-27-17004 is related to this service bulletin.
Issue 002 is sent to add Total Air Temperature (TAT) probe heater failure information, to update publications
affected, to update interchangeability and intermixability information, and to clarify work instructions which
will support incorporation of this service bulletin without complications.
4. Description
Install and test new FCE common block point 5 software and do a configuration check.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None
The work in this service bulletin is done in the maintenance zone(s) given below.
Table 3  
Affected Maintenance Zones
ZoneModel
117, 118, 145, 146787-10
5. Compliance
No compliance time is given.
Boeing recommends this service bulletin be done to prevent possible operational disruptions.
B787-A-27-00-0046-00A-932A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 7 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 8

6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
7. Manpower
The table below shows an estimate of the task hours necessary to do this software change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task
hour data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
Table 4  
Elapsed HoursTask HoursNumber of Per-
sons
Task
2.02.01Install and Check
Software
2.02.0TOTAL FOR EACH AIRPLANE
This estimate gives general service bulletin incorporation time. The specific software data transfer times
can change the estimate given in the table.
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA69365C
2. Aircraft Maintenance Manual (AMM) 787 AMM 24-22-00, 787 AMM 32-51-01, 787 AMM 42-21-
02, 787 AMM 45-11-00, 787 AMM 45-13-00, 787 AMM 46-13-00
B787-A-27-00-0046-00A-932A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 8 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 9

3. Boeing Service Letter (SL) 787-SL-00-003.
4. Boeing Fleet Team Digest (FTD) 787-FTD-27-17004.
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 5  
Chapter-SectionPublication
27-00787 Aircraft Maintenance Manual
Chapter 4 - Automatic Flight787 Flight Crew Operations Manual
27-00787 Fault Isolation Manual
46-12787 Illustrated Parts Data
30-33787 Master Minimum Equipment List
30-33787 Dispatch Deviation Guide
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs or changes in this service bulletin for effects on Fatigue Critical Structure
(FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This
service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
13. Software Accomplishment Summary
1. System / Systems affected by this change: Flight Computer Electronics (FCE).
2. Software changes which affect operational procedures: None.
3. Other software improvements:
– Added persistence to the Electronic Circuit Breaker (ECB) trip logic to reduce the frequency of
nuisance ECB trips.
– Revised high lift fault isolation logic to eliminate a known cause of uncorrelated high lift EICAS
messages
– Revised Trailing Edge Variable Camber (TEVC) command logic to eliminate overshoot when oper-
ating in a high lift system with low frictional drag
– Revised high lift command thresholds to reduce likelihood of command overshoot and improve
positional accuracy.
B787-A-27-00-0046-00A-932A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 9 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 10

– Radio altimeter input signal selection logic to re-admit a previously failed and now-valid radio altimeter
value as soon as the value becomes valid
– Revised airframe Total Air Temperature (TAT) Probe use logic to allow use of the TAT Probe tem-
perature sensing elements with a failed heater to support dispatch reliability improvements
B787-A-27-00-0046-00A-932A-DApplicable To:
Issue 002, 24 Oct 2019End of data moduleModel 787
See Applicability of this data module
Page 10 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 11

Service Bulletin B787-81205-SB270046-00
MATERIAL INFORMATION
References
TitleReference
ReferencesSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 10.
Description
Group 1:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane.
1. For Boeing provided Loadable Software (LSW) part numbers, order the LSW part number as follows:
Reference this service bulletin and submit your purchase order by one of these methods.
A. Order on-line via ATA Spec 2000 or The Boeing PART Page
B. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION.
Operators must order each instance of the Loadable Software (LSW) part numbers in Table 1 - Loadable
Software Attributes as shown in Paragraph 3.B., Parts and Materials Supplied by the Operator. The LSW
provider information is available in the Notes column of the Loadable Software Attributes Table.
2. Industry Support Information
Boeing warranty remedies are available for 787 airplanes in warranty as of January 13, 2017. For man-hour
reimbursement for airplanes in warranty as of that date, send a warranty claim to BCA Contracts - Warranty.
The software referenced in this service bulletin will be provided at no charge through Boeing Electronic
Distribution of Software (BEDS). The warranty remedies will expire eight years from the original release date
of this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
To get the parts/materials shown below, refer to Paragraph 1., Material - Price and Availability.
B787-A-27-00-0046-00A-934A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 11 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 12

Table 1  Loadable Software Attributes
NotesSoftware Part NomenclatureSystem NamePart Number
*[1]27 FCM LDI DBFlight Control Electronics (FCE)
System
HNP58-AD09-5025
*[2]27 FCM CMPT DBFlight Control Electronics (FCE)
System
HNP5A-AD04-5008
*[3]27 FCM OPSFlight Control Electronics (FCE)
System
HNP5D-AL01-5031
*[4]45 LDI DBCentral Maintenance Comput-
ing Function (CMCF)
BCG40-45LD-0069
*[1]  Boeing provided loadable software. Reference part number HNP58AD09-5025 for ordering purposes.
*[2]  Boeing provided loadable software. Reference part number HNP5AAD04-5008 for ordering purposes.
*[3]  Boeing provided loadable software. Reference part number HNP5DAL01-5031 for ordering purposes.
*[4]  Boeing provided loadable software. Reference part number BCG40-45LD0069 for ordering purposes.
C. Parts Modified and Reidentified:
None.
D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-27-00-0046-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-27-00-0046-00A-934A-DApplicable To:
Issue 002, 24 Oct 2019End of data moduleModel 787
See Applicability of this data module
Page 12 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 13

Service Bulletin B787-81205-SB270046-00
ACCOMPLISHMENT INSTRUCTIONS
References
TitleReference
ReferencesSB B787-A-27-00-0046-00A-932A-D Issue 002,
Paragraph 10.
Service Bulletin
B787-81205-SB270046-00 – Appendix A – POST
SOFTWARE INSTALLATION TASKS [Group 1:]
SB B787-A-27-00-0046-0AA-931D-D Issue 001
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
CENTRAL MAINTENANCE COMPUTING
FUNCTION
787 AMM 45-11-00
GENERAL PROCESSOR MODULE787 AMM 42-21-02
Procedure
Group 1:
1. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
CAUTION
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-27-00-0046-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 13 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 14

– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
4. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
5. Refer to 787 AMM 45-13-00 as an accepted procedure for the Onboard Data Load Function
(ODLF) and the software check.
6. Refer to 787 AMM 46-13-00 as an accepted procedure to stage software on a Mass Storage
Device (MSD).
7. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
8. Make sure there are no pre-existing system faults on the airplane that may impact software
loading. If faults are present, troubleshoot and clear before installing the new software given in
this service bulletin to help ensure a successful software load.
9. Boeing recommends installing new software using the Maintenance Laptop (ML) instead of the
Multi-Function Display (MFD) or Electronic Flight Bag (EFB). Using the ML will help reduce
complications in case of loss of displays during software installation, as well as faster load times.
10. Make sure all precondition steps are met before the software installation when using the Onboard
Data Load Function (ODLF). If a failure occurs, select the "FAIL REASON" for more information,
perform corrective actions, and install the software again.
11. The acronym "SLID" in the software attributes tables stands for "Software Location Identification".
2. WORK INSTRUCTIONS
A. PREPARE AIRPLANE AND STAGE SOFTWARE TO MASS STORAGE DEVICES
Supply electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted procedure.(1)
(2) Make sure the airplane has stable electrical power (two 90 KVA stingers preferred) that will not be
interrupted during software installation.
(3) Make sure the Auxiliary Power Unit (APU) is switched off.
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 14 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 15

(4) Make sure the Central Maintenance Computer (CMC) switch control operation can switch between
both the left and right CMC before installing any software. Refer to 787 AMM 45-11-00 as an accepted
procedure.
(5) Stage new software on the Mass Storage Device (MSD) in accordance with the Loadable Software
Attributes table below. Refer to 787 AMM 46-13-00 as an accepted procedure.
NOTE: This Mass Storage Device (MSD) staging step and AMM procedure is provided for reference
only. The MSDs are used to store Loadable Software Airplane Parts (LSAPs) as a conve-
nience to operators and minimize operational impacts of unscheduled maintenance. It is
not a Boeing or regulatory requirement to stage or maintain (i.e. maintain in a specific con-
figuration) LSAPs on the MSDs. Operators can use their own procedure to stage LSAPs
on MSDs. 
Boeing recommends that operators maintain the latest airplane configuration LSAPs on the
MSDs to make available if loadable LRU maintenance is required in the event of planned
/ unplanned component change. Refer to Boeing Service Letter 787-SL-00-003 for more
information. 
Table 1  Loadable Software Attributes
NotesSoftware Loca-
tion Identifica-
tion
Staging Destina-
tion
Software Part
Nomenclature
System NamePart Number
*[1]LS1185146CIS MS FSM
MSD-1
27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1185146CIS MS FSM
MSD-1
27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]LS1185146CIS MS FSM
MSD-1
27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]LS1185146CIS MS FSM
MSD-1
45 LDI DBCentral Mainte-
nance Computer
Function (CM-
CF)
BCG40-45LD-0069
*[1]*[2]LS1765187CIS MS FSM
MSD-2
27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]*[2]LS1765187CIS MS FSM
MSD-2
27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 15 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 16

Table 1  Loadable Software Attributes
NotesSoftware Loca-
tion Identifica-
tion
Staging Destina-
tion
Software Part
Nomenclature
System NamePart Number
*[1]*[2]LS1765187CIS MS FSM
MSD-2
27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[1]*[2]LS1765187CIS MS FSM
MSD-2
45 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
B. INSTALL NEW SOFTWARE
Install each instance of the software listed in the Loadable Software Attributes table below concur-
rently to the Left Flight Control Module (FCM) on the airplane using the On-Board Data Load
(1)
Function (ODLF). Refer to 787 AMM 45-13-00 as an accepted procedure. If the software load fails,
do corrective actions and repeat the software load until the software load passes.
Table 2  Loadable Software Attributes
ODLF LOAD SESSION # 01
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1731825FCM-L27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1731825FCM-L27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]LS1731825FCM-L27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[2]LS1731825FCM-L27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  The 27 FCM ADRF software part number HNP20-AD0E-5003 is available in LS1185146 (CIS MS FSM MSD-1) or LS1765187 (CIS
MS FSM MSD-2).
(2) Make sure each software part number given in Table 2 is installed for FCM-L. Refer to "How to
Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 16 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 17

(a) If software configuration for FCM-L is incorrect, reload applicable software part number to re-
spective FCM location in accordance with Table 2.
(3) Install each instance of the software listed in the Loadable Software Attributes table below concur-
rently to the right and center FCMs on the airplane using the ODLF. Refer to 787 AMM 45-13-00
as accepted procedure. If the software load fails, do corrective actions and repeat the software
load until the software load passes.
Table 3  Loadable Software Attributes
ODLF LOAD SESSION # 02
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1071950FCM-R27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1071950FCM-R27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]LS1071950FCM-R27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[2]LS1071950FCM-R27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]LS1521993FCM-C27 FCM OPSFlight Control
Electronics
(FCE) System
HNP5D-AL01-5031
*[1]LS1521993FCM-C27 FCM LDI
DB
Flight Control
Electronics
(FCE) System
HNP58-AD09-5025
*[1]LS1521993FCM-C27 FCM CMPT
DB
Flight Control
Electronics
(FCE) System
HNP5A-AD04-5008
*[2]LS1521993FCM-C27 FCM ADRF
DB
Flight Control
Electronics
(FCE) System
HNP20-AD0E-5003
*[1]  Do not install previous versions of this software after installation of the new software.
*[2]  The 27 FCM ADRF software part number HNP20-AD0E-5003 is available in LS1185146 (CIS MS FSM MSD-1) or LS1765187 (CIS
MS FSM MSD-2).
(4) Make sure each software part number given in Table 3 is installed for FCM-R and FCM-C. Refer
to "How to Find the Configuration of the Components in a System" section in 787 AMM 45-11-00
as an accepted procedure.
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 17 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 18

(a) If software configuration for FCM-R and FCM-C is incorrect, reload applicable software part
number to respective FCM location in accordance with Table 3.
(5) Make sure the Central Maintenance Computer (CMC) is under control of the right CMC. If the CMC
is not under control of the right CMC, switch CMC control to the right CMC. Refer to 787 AMM 45-
11-00 as an accepted procedure.
(6) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 and 787 AMM 42-21-02 as accepted procedures.
NOTE: It is recommended to load GPMs in one cabinet first and when completed, load the GPM
in the other cabinet. Loading the GPMs concurrently can result in the CCRs re-sync issue.
Data load (DL) history may be deleted after loading LDIs on GPMs, so the verification of
DL history should be done separately for the LDI load on each GPM. 
Table 4  Loadable Software Attributes
ODLF LOAD SESSION # 03
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1696327CCR GPM-L745 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
(7) Make sure each software part number given in Table 4 is installed for GPM-L7. Refer to "How to
Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
(a) If software configuration for GPM-L7 is incorrect, reload applicable software part number to
respective GPM location in accordance with Table 4.
(8) Switch CMC control to the left CMC. Refer to 787 AMM 45-11-00 as an accepted procedure.
(9) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 and 787 AMM 42-21-02 as accepted procedures.
NOTE: It is recommended to load GPMs in one cabinet first and when completed, load the GPM
in the other cabinet. Loading the GPMs concurrently can result in the CCRs re-sync issue.
Data load (DL) history may be deleted after loading LDIs on GPMs, so the verification of
DL history should be done separately for the LDI load on each GPM. 
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 18 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 19

Table 5  Loadable Software Attributes
ODLF LOAD SESSION # 04
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1267201CCR GPM-R745 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
(10) Make sure each software part number given in Table 5 is installed for GPM-R7. Refer to "How to
Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as an accepted
procedure.
(a) If software configuration for GPM-R7 is incorrect, reload applicable software part number to
respective GPM location in accordance with Table 5.
(11) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 as an accepted procedure.
NOTE: If the FSM-2 is installed on the airplane. A reset will occur, causing loss of maintenance
laptop session and ODLF. Reset duration is approximately 10 minutes. 
Table 6  Loadable Software Attributes
ODLF LOAD SESSION # 05
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1455153CIS MS FSM-245 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
(12) Make sure each software part number given in Table 6 is installed for CIS MS FSM-2. Refer to
"How to Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as
an accepted procedure.
(a) If software configuration for CIS MS FSM-2 is incorrect, reload applicable software part number
to respective CIS MS FSM location in accordance with Table 6.
(13) Install each instance of the software listed in the Loadable Software Attributes table below on the
airplane using ODLF. Refer to 787 AMM 45-13-00 as an accepted procedure.
NOTE: A reset will occur, causing loss of maintenance laptop session and ODLF. Reset duration
is approximately 10 minutes. 
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019Model 787
See Applicability of this data module
Page 19 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 20

Table 7  Loadable Software Attributes
ODLF LOAD SESSION # 06
NotesSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Software Part
Nomenclature
System NamePart Number
*[1]LS1205130CIS MS FSM-145 LDI DBCentral Mainte-
nance Comput-
ing Function
(CMCF)
BCG40-45LD-0069
*[1]  Do not install previous versions of this software after installation of the new software.
(14) Make sure each software part number given in Table 7 is installed for CIS MS FSM-1. Refer to
"How to Find the Configuration of the Components in a System" section in 787 AMM 45-11-00 as
an accepted procedure.
(a) If software configuration for CIS MS FSM-1 is incorrect, reload applicable software part number
to respective CIS MS FSM location in accordance with Table 7.
C. PART 3: PERFORM SYSTEM TESTS
Do the Central Maintenance Computing Function (CMCF) General Processor Module File System
Erase Ground Test procedure for GPM-L7 and GPM-R7 one GPM at a time. Refer to Data Module
Appendix A, SB B787-A-27-00-0046-0AA-931D-D as an accepted procedure.
(1)
NOTE: Use a Maintenance Laptop (ML) to execute each GPM file system erase ground test. 
NOTE: Do not use the Electronic Flight Bag (EFB) or a Multi-Function Display (MFD) to execute
the GPM file system erase ground test. 
NOTE: Only perform the General Processor Module File System Erase Ground Test on one GPM
at a time. 
(2) Do the Post Software Installation - Airplane Condition Monitoring Function (ACMF) Synchronization
procedure. Refer to Data Module Appendix A, SB B787-A-27-00-0046-0AA-931D-D as an accepted
procedure.
(3) Do the Nosewheel Steering System Left and Right Tiller and Rudder Pedal Disconnect Switch Cali-
bration procedure. Refer to Data Module Appendix A, SB B787-A-27-00-0046-0AA-931D-D as an
accepted procedure.
(4) Do the General Processor Module LRU Replacement Ground Test procedure for GPM-L7 and GPM-
R7 one GPM at a time. Refer to Data Module Appendix A, SB B787-A-27-00-0046-0AA-931D-D as
an accepted procedure.
(5) Put the airplane back to a serviceable condition.
B787-A-27-00-0046-00A-933A-DApplicable To:
Issue 002, 24 Oct 2019End of data moduleModel 787
See Applicability of this data module
Page 20 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 21

Service Bulletin B787-81205-SB270046-00
Appendix A – POST SOFTWARE INSTALLATION TASKS [Group 1:]
References
TitleReference
GENERAL PROCESSOR MODULE787 AMM 42-21-02
NOSE WHEEL STEERING TILLER MODULE787 AMM 32-51-01
Procedure
Group 1:
1. GENERAL PROCESSOR MODULE FILE SYSTEM ERASE GROUND TEST
The following is an acceptable procedure extracted from 787 AMM 42-21-02. NOTE:
NOTE: All post-software installation tasks should be performed using the Maintenance Laptop (ML). 
NOTE: Perform the following tests in the order listed below. If software is installed to GPM-L7 and GPM-
R7, the File System Erase Ground test must be run for GPM-L7 and GPM-R7. 
A. Start this Central Maintenance Computing Function (CMCF) ground test: 42 Common Computing Resource
(CCR) - Left CCR, LRU Replacement, Left 7 GPM File System Erase.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: It is recommended to use the ML to start the ground test. Do not use the Electronic Flight
Bag (EFB). 
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the CCR cabinet or airplane within this 30 minutes. 
NOTE: Do not run the File System Erase Ground Test for both GPM L7 and GPM R7 at the same
time. 
B. Start this CMCF ground test: 42 Common Computing Resource (CCR) - Right CCR, LRU Replacement,
Right 7 GPM File System Erase.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: It is recommended to use the ML to start the ground test. Do not use the EFB. 
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the CCR cabinet or airplane within this 30 minutes. 
NOTE: Do not run the File System Erase Ground Test for both GPM-L7 and GPM-R7 at the same
time. 
B787-A-27-00-0046-0AA-931D-DApplicable To:
Issue 001, 24 Oct 2019Model 787
See Applicability of this data module
Page 21 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 22

2. ACMF SYNCHRONIZATION
The following is an acceptable procedure extracted from 787 AMM 42-21-02. NOTE:
A. Start this CMCF ground test: 42 Common Computing Resource (CCR) - Right CCR, LRU Replacement
test, Right 1 GPM.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
3. NOSEWHEEL STEERING SYSTEM LEFT AND RIGHT TILLER AND RUDDER PEDAL DISCONNECT
SWITCH CALIBRATION
NOTE: The following is an acceptable procedure extracted from 787 AMM 32-51-01. 
A. Start this CMCF ground test: 32 Nosewheel Steering System, LRU Replacement, Nose Wheel Steering
System (NWSS) Left Tiller Replacement & Calibration.
NOTE: Do not touch the Tiller handles during the calibration. 
NOTE: It is recommended to use the ML to start the ground test. Do not use the EFB. 
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
B. Start this CMCF ground test: 32 Nosewheel Steering System, LRU Replacement, NWSS Right Tiller
Replacement & Calibration.
NOTE: Do not touch the Tiller handles during the calibration. 
NOTE: It is recommended to use the ML to start the ground test. Do not use the EFB. 
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
C. To calibrate the captain's rudder pedal disconnect switch. Do these steps:
(1) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(2) Release the rudder pedal disconnect switch.
(a) Make sure that "OFF" shows for the "CAPT RPDS SW" for SYS 1 and SYS 2 on the "LNDG
GEAR INDN AND STRNG" maintenance page.
(3) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(a) Make sure that "ON" shows for the CAPT RPDS SW for SYS 1 and SYS 2 on the LNDG GEAR
INDN AND STRNG maintenance page.
(4) Release the rudder pedal disconnect switch.
(5) Turn the captain's steering tiller to 70 degrees to the left.
(a) Look for the following indication on the "LNDG GEAR INDN AND STRNG" maintenance page:
1) "CAPT TILLER" shows 69 degrees to 71 degrees to the left for SYS 1 and SYS 2.
(6) Turn the captain's steering tiller to 70 degrees to the right.
B787-A-27-00-0046-0AA-931D-DApplicable To:
Issue 001, 24 Oct 2019Model 787
See Applicability of this data module
Page 22 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

### Page 23

(a) Look for the following indication on the "LNDG GEAR INDN AND STRNG" maintenance page:
1) "CAPT TILLER" shows 69 degrees to 71 degrees to the right for SYS 1 and SYS 2.
D. To calibrate the first officer's rudder pedal disconnect switch. Do these steps:
(1) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(2) Release the rudder pedal disconnect switch.
(a) Make sure that "OFF" shows for the "FO RPDS SW" for SYS 1 and SYS 2 on the "LNDG GEAR
INDN AND STRNG" maintenance page.
(3) Push and hold the rudder pedal disconnect switch for more than 10 seconds.
(a) Make sure that "ON" shows for the F/O RPDS SW for SYS 1 and SYS 2 on the LNDG GEAR
INDN AND STRNG maintenance page.
(4) Release the rudder pedal disconnect switch.
(5) Turn the first officer's steering tiller to 70 degrees to the left.
(a) Look for the following indication on the "LNDG GEAR INDN AND STRNG" maintenance page:
1) "F/O TILLER" shows 69 degrees to 71 degrees to the left for SYS 1 and SYS 2.
(6) Turn the first officer's steering tiller to 70 degrees to the right.
(a) Look for the following indication on the "LNDG GEAR INDN AND STRNG" maintenance page:
1) "F/O TILLER" shows 69 degrees to 71 degrees to the right for SYS 1 and SYS 2.
4. GENERAL PROCESSOR MODULE LRU REPLACEMENT GROUND TEST
The following is an acceptable procedure extracted from 787 AMM 42-21-02. NOTE:
NOTE: All post-software installation tasks should be performed using the ML. 
A. Start this CMCF ground test: 42 Common Computing Resource (CCR) - Left CCR, LRU Replacement,
Left 7 GPM.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the CCR cabinet or airplane within this 30 minutes. 
B. Start this CMCF ground test: 42 Common Computing Resource (CCR) - Right CCR, LRU Replacement,
Right 7 GPM.
(1) When the test is completed, make sure that "PASSED" shows adjacent to "TEST CONDITION".
(2) If "FAILED" shows, then do the fault isolation procedure for the maintenance message.
NOTE: The CMCF application for the GPM-L7 or GPM-R7 will not be available for 30 minutes. Do
not power down the CCR cabinet or airplane within this 30 minutes. 
B787-A-27-00-0046-0AA-931D-DApplicable To:
Issue 001, 24 Oct 2019End of data moduleModel 787
See Applicability of this data module
Page 23 of 23
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB270046-00
Issue 002, 24 Oct 2019
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
