# Boeing Service Bulletin B787-81205-SB310014: Revision 002

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0989; AD 2020-20-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin B787-81205-SB310014](https://openairdocs.org/service-documents/boeing/b787-81205-sb310014.md)
- Title as filed: B787-81205-SB310014-02
- Pages: 37
- PDF: https://openairdocs.org/files/sha256/d7/ef/d7efc907aeba700da66d981173eae2fc5d35aa3ea1b5ca63bed67518905c303b
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb310014/file/d7efc907aeba

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Service Bulletin B787-81205-SB310014-00 INDICATING/RECORDING
SYSTEMS - Primary Display System - Displays and Crew Alerting System
and Maintenance System Software Common Block Point 4 Installation
Issue 002, 14 Jun 2017B787-81205-SB310014-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 and 787-9 Airplanes. Refer to Data Module SB B787-A-31-00-0014-00A-932A-D, Paragraph 1., Effectivity
for the list of affected airplanes.
B787-81205-SB310014-00TITLE PAGE
Issue 002, 14 Jun 2017
Page 1 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 2

Alert Service Bulletin B787-81205-SB310014-00
Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B. Spares Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
A. Existing Data:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. Data Supplied with this Service Bulletin:  . . . . . . . . . . . . . . . . . . . . . . . . . . 18
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  . . . 18
11. Publications Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . 18
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. Industry Support Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
A. Kits/Parts:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
B. Parts and Materials Supplied by the Operator:  . . . . . . . . . . . . . . . . . . . . . . . 21
C. Parts Modified and Reidentified:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
D. Parts Removed and Not Replaced:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6. Special Tooling Necessary to do this Service Bulletin  . . . . . . . . . . . . . . . . . . . . . 24
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
B787-81205-SB310014-00TABLE OF CONTENTS
Issue 002, 14 Jun 2017
Page 2 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 3

Alert Service Bulletin B787-81205-SB310014-00
List of Effective Data Modules
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER.
Description
Group 1-4:
Table 1  List of Effective Data Modules - Alert Service Bulletin B787-81205-SB310014-00
Issue DateIssue StatusIssueData Module – Information Name
2017-06-14Changed002B787-A-31-00-0014-00A-00SA-D – List of Effective Data Modules
2017-06-14New001B787-A-31-00-0014-00A-931B-D – Revision Transmittal Information
2017-06-14Changed002B787-A-31-00-0014-00A-931C-D – Summary
2017-06-14Changed002B787-A-31-00-0014-00A-932A-D – PLANNING INFORMATION
2017-06-14Changed002B787-A-31-00-0014-00A-934A-D – MATERIAL INFORMATION
2017-06-14Changed002B787-A-31-00-0014-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
B787-A-31-00-0014-00A-00SA-DApplicable To:
Issue 002, 14 Jun 2017End of data moduleModel 787
See Applicability of this data module
Page 3 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 4

Alert Service Bulletin B787-81205-SB310014-00
Revision Transmittal Information
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER.
References
TitleReference
AirplanesSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 1.A.
Description
Group 1-4:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this revision on Airplanes on which Issue 001 was previously done:
None.
2. REASON FOR REVISION
This issue is sent to add Aircraft Maintenance Manual (AMM), Boeing Service Letter (SL), Boeing Fleet
Team Digest (FTD) and Multi-Operator Message (MOM) references, update concurrent requirement issue
numbers, remove Required for Compliance (RC) labeling from MS 45 LDI DB installation steps, add instruc-
tions to install the Boeing released 31 Displays Crew Alerting (DCA) Electronic Checklist (ECL) Airline
Modifiable Information (AMI), and add related Federal Aviation Administration (FAA) Airworthiness Directive
(AD) information.
The data given in Information Notice B787-81205-SB310014-00 IN01 is included in this issue.
These sections were changed:
1. SUMMARY, Paragraph 2., Background, added FTD and MOM references.
2. SUMMARY, Paragraph 5., Compliance, added related FAA AD information.
3. PLANNING INFORMATION, Paragraph 2., Concurrent Requirements, added most recent issue numbers.
4. PLANNING INFORMATION, Paragraph 3., Reason, added FTD and MOM references, added reason
for revision information.
5. PLANNING INFORMATION, Paragraph 4., Description, added effects of revision information.
6. PLANNING INFORMATION, Paragraph 5., Compliance, added related FAA AD information.
B787-A-31-00-0014-00A-931B-DApplicable To:
Issue 001, 14 Jun 2017Model 787
See Applicability of this data module
Page 4 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 5

7. PLANNING INFORMATION, Paragraph 6., Approval, added Alternative Method of Compliance (AMOC)
paragraph.
8. PLANNING INFORMATION, Paragraph 10.A., Existing Data, updated AMM, FTD, MOM, SL and AD
references.
9. MATERIAL INFORMATION, Paragraph 3.B., Parts and Materials Supplied by the Operator, added table
for 31 DCA ECL AMI.
10. ACCOMPLISHMENT INSTRUCTIONS, Paragraph 2., added step C, re-sequenced subsequent steps.
11. ACCOMPLISHMENT INSTRUCTIONS, Paragraph 2., added step D, re-sequenced subsequent steps.
12. ACCOMPLISHMENT INSTRUCTIONS, Paragraph 2., step K, added AMM reference.
13. ACCOMPLISHMENT INSTRUCTIONS, Paragraph 2., step O, R, T and U, removed RC labeling.
14. ACCOMPLISHMENT INSTRUCTIONS, Paragraph 2., added step V, re-sequenced subsequent steps.
15. ACCOMPLISHMENT INSTRUCTIONS, Paragraph 2., added step W, re-sequenced subsequent steps.
Change marks are added, except in Data Module SB B787-A-31-00-0014-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
3. REVISION HISTORY
Table 1  
September 30, 2016Issue 1:
June 14, 2017Issue 2:
B787-A-31-00-0014-00A-931B-DApplicable To:
Issue 001, 14 Jun 2017End of data moduleModel 787
See Applicability of this data module
Page 5 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 6

Alert Service Bulletin B787-81205-SB310014-00
Summary
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER.
References
TitleReference
Concurrent RequirementsSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 2.
Spares AffectedSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 1.B.
ComplianceSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 5.
Weight and Balance ChangesSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 8.
Electrical Load DataSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 9.
Publications AffectedSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 11.
Kits/PartsSB B787-A-31-00-0014-00A-934A-D Issue 002,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-31-00-0014-00A-934A-D Issue 002,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-31-00-0014-00A-934A-D Issue 002,
Paragraph 6.
EffectivitySB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 1.
ManpowerSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 7.
Material - Price and AvailabilitySB B787-A-31-00-0014-00A-934A-D Issue 002,
Paragraph 1.
B787-A-31-00-0014-00A-931C-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 6 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 7

Description
Group 1-4:
1. CONCURRENT REQUIREMENTS
Refer to Data Module SB B787-A-31-00-0014-00A-932A-D, Paragraph 2., Concurrent Requirements.
2. BACKGROUND
This service bulletin provides instructions to install new Displays and Crew Alerting (DCA) System and
Maintenance System (MS) software, also known as Common Block Point 4 (CBP4). Flight crews are not
alerted when the Calibrated Air Speed (CAS) of the airplane drops to Non-Computed Data (NCD). The NAV
AIR DATA SYS message is designed to alert flight crews when all static pressure channels are lost. The
flight crew does not receive an alert message if the airspeed drops to NCD. If this service bulletin is not
done, the CAS may drop to NCD without alerting the flight crew, which can result in unsafe flight conditions.
An operator reported an in-flight incident where CAS dropped to NCD and the flight crew received no alert
that the airspeed was unreliable. The actual airspeed had not changed, however, the indicated airspeed
decreased. The pilot experienced an abrupt shift in feel forces during autopilot disconnect and transition to
secondary mode that made manual control inputs more difficult.
This service bulletin will change the NAV AIR DATA SYS Engine Indication and Crew Alerting System
(EICAS) message to annunciate when the calibrated airspeed is NCD.
Boeing Service Related Problem (SRP) 787 SRP-31-0057 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 787-FTD-31-15004, 787-FTD-34-14004 and 787-FTD-31-16002 are related
to this service bulletin.
Multi-Operator Message (MOM) MOM-MOM-16-0752-01B is related to this service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-31-00-0014-00A-932A-
D, Paragraph 1.B., Spares Affected
NoSpares Affected
Data Module SB B787-A-31-00-0014-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
Data Module SB B787-A-31-00-0014-00A-932A-
D, Paragraph 8., Weight and Balance Changes
NoWeight and Balance Changed
Data Module SB B787-A-31-00-0014-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-31-00-0014-00A-932A-
D, Paragraph 11., Publications Affected
YesPublications Affected
Data Module SB B787-A-31-00-0014-00A-932A-
D, Paragraph 11., Publications Affected
YesAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
B787-A-31-00-0014-00A-931C-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 7 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 8

Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-31-00-0014-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
Data Module SB B787-A-31-00-0014-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-31-00-0014-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
3. ACTION
(CN-AC54222A)
Install the new Displays and Crew Alerting (DCA) System and Maintenance System (MS) software and do
the software check.
4. EFFECTIVITY
787-8 and 787-9 Airplanes. Refer to Data Module SB B787-A-31-00-0014-00A-932A-D, Paragraph 1., Effec-
tivity for the list of affected airplanes.
5. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 6 months after the Issue
001 date of this service bulletin.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2015-14-07 is related to this service bulletin.
The effective date of AD 2015-14-07 is August 20, 2015.
6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
Notwithstanding, Boeing will provide the supplier software referenced in this service bulletin at no charge.
7. MANPOWER
Refer to Data Module SB B787-A-31-00-0014-00A-932A-D, Paragraph 7., Manpower.
8. MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Data Module SB B787-A-31-00-0014-00A-934A-D, Paragraph 1., Material - Price and Availability.
B787-A-31-00-0014-00A-931C-DApplicable To:
Issue 002, 14 Jun 2017End of data moduleModel 787
See Applicability of this data module
Page 8 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 9

Alert Service Bulletin B787-81205-SB310014-00
PLANNING INFORMATION
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER.
References
TitleReference
Parts Necessary for Each AirplaneSB B787-A-31-00-0014-00A-934A-D Issue 002,
Paragraph 3.
WATER/WASTE - Waste Water System - Waste
Water System Software and Operational Software
Change
SB B787-81205-SB380013-00
FLIGHT CONTROLS - Primary Flight Control
Function - Flight Control Electronics Common Block
Point 2 Software Change
SB B787-81205-SB270029-00
FLIGHT CONTROLS - Primary Flight Control
Function - Flight Control Electronics Common Block
Point 2 Software Change
SB B787-81205-SB270036-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
PRIMARY DISPLAY SYSTEM787 AMM 31-61-00
CENTRAL MAINTENANCE COMPUTING
FUNCTION
787 AMM 45-11-00
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
CORE NETWORK SYSTEM787 AMM 46-12-00
CREW INFORMATION SYSTEM/MAINTENANCE
SYSTEM FILE SERVER MODULE
787 AMM 46-12-04
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
FLIGHT DECK SECURITY DOOR787 AMM 52-51-00
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 9 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 10

Description
Group 1-4:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 and 787-9 Airplanes, line numbers 4-9, 11-14, 20-459 in 4
Groups. The Variable Numbers and Group information for the applicable airplanes is given below. An
equivalent change is on subsequent production airplanes. Refer to CN-AA54222D for data about this
change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 and 787-9 Airplanes without a concurrent requirement.-1
Airplanes with configured 31 Display Crew Alerting (DCA) Electronic
Checklist 1 (ECL 1) Airline Modifiable Information (AMI) installed and
unconfigured (empty database) 31 DCA ECL 2 AMI.
1
Airplanes with configured 31 DCA ECL 1 AMI installed and configured
31 DCA ECL 2 AMI installed.
2
787-8 and 787-9 Airplanes with a concurrent requirement.-2
Airplanes with configured 31 Display Crew Alerting (DCA) Electronic
Checklist 1 (ECL 1) Airline Modifiable Information (AMI) installed and
unconfigured (empty database) 31 DCA ECL 2 AMI.
1
Airplanes with configured 31 DCA ECL 1 AMI installed and configured
31 DCA ECL 2 AMI installed.
2
787-8 Airplanes with concurrent requirements.-3
Airplanes with configured 31 Display Crew Alerting (DCA) Electronic
Checklist 1 (ECL 1) Airline Modifiable Information (AMI) installed and
unconfigured (empty database) 31 DCA ECL 2 AMI.
1
Airplanes with configured 31 DCA ECL 1 AMI installed and configured
31 DCA ECL 2 AMI installed.
2
787-9 Airplanes with concurrent requirements.-4
Airplanes with configured 31 Display Crew Alerting (DCA) Electronic
Checklist 1 (ECL 1) Airline Modifiable Information (AMI) installed and
unconfigured (empty database) 31 DCA ECL 2 AMI.
1
Airplanes with configured 31 DCA ECL 1 AMI installed and configured
31 DCA ECL 2 AMI installed.
2
Airplane Models: 787-8, 787-9
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 10 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 11

Table 2  
GroupVariable Number
3ZA004-ZA006
3ZA100-ZA105
3ZA116-ZA124
3ZA135-ZA143
2ZA144
3ZA152-ZA153
1ZA154-ZA155
3ZA175-ZA189
3ZA195-ZA202
2ZA203-ZA204
3ZA215-ZA225
3ZA230-ZA250
3ZA260-ZA275
3ZA285-ZA296
3ZA317-ZA324
3ZA327
3ZA334-ZA335
3ZA341-ZA342
3ZA380-ZA389
3ZA430-ZA439
3ZA445-ZA448
3ZA450-ZA457
3ZA460-ZA486
2ZA487-ZA489
3ZA506-ZA516
3ZA536-ZA545
3ZA560-ZA567
3ZA576-ZA580
3ZA586
3ZA588-ZA593
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 11 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 12

Table 2  
GroupVariable Number
3ZA610-ZA617
3ZA650-ZA652
3ZA655-ZA663
3ZA665-ZA671
3ZA680-ZA685
3ZA695
3ZA715-ZA716
3ZA718-ZA719
3ZA740-ZA741
3ZA768-ZA769
3ZA778-ZA779
3ZA783-ZA784
3ZA817-ZA831
3ZA839
3ZA841-ZA842
3ZA846-ZA848
3ZA853-ZA856
2ZA857
3ZA881
2ZA882
2ZA916-ZA917
4ZB001-ZB006
1ZB007
4ZB021-ZB023
2ZB024
1ZB025
4ZB027-ZB037
2ZB038-ZB039
2ZB047-ZB049
1ZB050
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 12 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 13

Table 2  
GroupVariable Number
4ZB077-ZB081
2ZB097-ZB098
1ZB099-ZB100
4ZB127-ZB132
4ZB167-ZB182
2ZB183-ZB184
4ZB197-ZB198
4ZB224-ZB228
4ZB234-ZB236
2ZB237-ZB238
4ZB299
2ZB302
4ZB362-ZB368
2ZB369-ZB373
4ZB407-ZB413
2ZB414-ZB416
4ZB536-ZB539
2ZB540
4ZB545-ZB546
4ZB558-ZB563
2ZB564-ZB570
4ZB603-ZB605
2ZB606
4ZB611-ZB614
2ZB615-ZB617
4ZB646
2ZB647
1ZB648
1ZB688
2ZB763
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 13 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 14

Table 2  
GroupVariable Number
2ZB778
1ZB782-ZB783
2ZD002
2ZD004
1ZD005-ZD006
B. Spares Affected
None.
2. Concurrent Requirements
Group 1:
None.
Group 2:
The service bulletin listed below must be done before or at the same time as this service bulletin.
Group 2:
Table 3  
DescriptionService BulletinCompany
Waste Water System Software and Opera-
tional Software Change
SB B787-81205-SB380013-00 Issue 001 or
Issue 002
Boeing
Group 3:
The service bulletins listed below must be done before or at the same time as this service bulletin.
Group 3:
Table 4  
DescriptionService BulletinCompany
Waste Water System Software and Opera-
tional Software Change
SB B787-81205-SB380013-00 Issue 001 or
Issue 002
Boeing
Flight Control Electronics Common Block
Point 2 Software Change
SB B787-81205-SB270029-00 Issue 001 or
Issue 002
Boeing
Group 4:
The service bulletins listed below must be done before or at the same time as this service bulletin.
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 14 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 15

Group 4:
Table 5  
DescriptionService BulletinCompany
Waste Water System Software and Opera-
tional Software Change
SB B787-81205-SB380013-00  Issue 001
or Issue 002
Boeing
Flight Control Electronics Common Block
Point 2 Software Change
SB B787-81205-SB270036-00 Issue 001Boeing
Group 1-4:
3. Reason
This service bulletin provides instructions to install new Displays and Crew Alerting (DCA) System and
Maintenance System (MS) software, also known as Common Block Point 4 (CBP4). Flight crews are not
alerted when the Calibrated Air Speed (CAS) of the airplane drops to Non-Computed Data (NCD). The
NAV AIR DATA SYS message is designed to alert flight crews when all static pressure channels are lost.
The flight crew does not receive an alert message if the airspeed drops to NCD. If this service bulletin is
not done, the CAS may drop to NCD without alerting the flight crew, which can result in unsafe flight condi-
tions.
An operator reported an in-flight incident where CAS dropped to NCD and the flight crew received no alert
that the airspeed was unreliable. The actual airspeed had not changed, however, the indicated airspeed
decreased. The pilot experienced an abrupt shift in feel forces during autopilot disconnect and transition
to secondary mode that made manual control inputs more difficult.
This service bulletin will change the NAV AIR DATA SYS Engine Indication and Crew Alerting System
(EICAS) message to annunciate when the calibrated airspeed is NCD.
Boeing Service Related Problem (SRP) 787 SRP-31-0057 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 787-FTD-31-15004, 787-FTD-34-14004 and 787-FTD-31-16002 are re-
lated to this service bulletin.
Multi-Operator Message (MOM) MOM-MOM-16-0752-01B is related to this service bulletin.
Issue 002 is sent to add Aircraft Maintenance Manual (AMM), Boeing Service Letter (SL), Boeing Fleet
Team Digest (FTD) and Multi-Operator Message (MOM) references, update concurrent requirement issue
numbers, remove Required for Compliance (RC) labeling from MS 45 LDI DB installation steps, add instruc-
tions to install the Boeing released 31 Displays Crew Alerting (DCA) Electronic Checklist (ECL) Airline
Modifiable Information (AMI), and add related Federal Aviation Administration (FAA) Airworthiness Directive
(AD) information.
4. Description
Install the new Displays and Crew Alerting (DCA) System and Maintenance System (MS) software and do
the software check.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None.
The work in this service bulletin is done in the maintenance zone(s) given below.
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 15 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 16

Group 1-2:
Table 6  
Affected Maintenance Zones
ZoneModel
117, 145, 211, 212787-8, 787-9
Group 3:
Table 7  
Affected Maintenance Zones
ZoneModel
117, 145, 211, 212787-8
Group 4:
Table 8  
Affected Maintenance Zones
ZoneModel
117, 145, 211, 212787-9
Group 1-4:
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 6 months after the Issue
001 date of this service bulletin.
Federal Aviation Administration (FAA) Airworthiness Directive AD 2015-14-07 is related to this service
bulletin. The effective date of AD 2015-14-07 is August 20, 2015.
In addition, the Manager of the FAA Seattle Aircraft Certification Office has approved the installation of
CMCF LDI DB (45 LDI DB) software, such as that defined in this service bulletin
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 16 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 17

In addition, the Manager of the FAA Seattle Aircraft Certification Office has approved the installation of
CMCF LDI DB (45 LDI DB) software, such as that defined in this service bulletin, as an alternative method
of compliance to the CMCF LDI DB software requirements of paragraphs (g) and (h) of AD 2015-14-07.
All provisions of AD 2015-14-07 that are not specifically referenced in the above statement remain fully
applicable and must be complied with.
7. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane. This
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour
data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
Table 9  
Elapsed HoursTask HoursNumber of Per-
sons
Task
3.503.501Install and Check
Software
3.503.50TOTAL FOR EACH AIRPLANE
This estimate gives general service bulletin incorporation time. The specific software data transfer times
can change the estimate given in the table.
Group 2-4:
This estimate does not include the task hour data given in the service bulletins in Paragraph 2., Concurrent
Requirements.
Group 1-4:
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AC54222A
2. Aircraft Maintenance Manual (AMM) 787 AMM 24-22-00, 787 AMM 31-61-00, 787 AMM 45-11-
00, 787 AMM 45-13-00, 787 AMM 46-12-00, 787 AMM 46-12-04, 787 AMM 46-13-00, 787 AMM
52-51-00
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 17 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 18

3. Boeing Service Bulletin (SB) SB B787-81205-SB270029-00 Issue 001 or Issue 002, SB B787-
81205-SB270036-00 Issue 001, SB B787-81205-SB380013-00 Issue 001 or Issue 002
4. Boeing Service Related Problem (SRP) 787 SRP-31-0057
5. Boeing Fleet Team Digest (FTD) 787-FTD-31-15004, 787-FTD-34-14004, 787-FTD-31-16002
6. Boeing Service Letter (SL) 787-SL-00-003, 787-SL-00-008
7. Multi-Operator Message (MOM) MOM-MOM-16-0752-01B
8. Federal Aviation Administration (FAA) Airworthiness Directive (AD) AD 2015-14-07
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
11. Publications Affected
Table 10  
Chapter-SectionPublication
11.60787 Flight Crew Operations Manual
46-12787 Illustrated Parts Data
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Refer to Data Module SB B787-A-31-00-0014-00A-934A-D, Paragraph 3., Parts Necessary for Each Airplane,
for interchangeability and intermixability information.
13. Software Accomplishment Summary
1. Systems affected by this change: Displays and Crew Alerting (DCA) System, Maintenance System
(MS)
2. Software changes which affect operational procedures: None
3. Other software improvements:
– Displays and Crew Alerting (DCA) Engine Indication and Crew Alerting System (EICAS) NAV AIR
DATA SYS messages changed from an Advisory level message to a Caution level message
– DCA EICAS NAV AIR DATA SYS messages to annunciate when calibrated airspeed functional
status is Non-Computed Data (NCD)
– Central Maintenance Computing Function (CMCF) Loadable Diagnostic Information (LDI) to reflect
EICAS message revisions
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 18 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 19

– DCA Checklist function to reflect EICAS message revisions
– DCA Primary Flight Display (PFD) Speed Tape and Altitude Tape logic to display synthetic
speed/altitude (Angle of Attack speed, Global Positioning System Altitude) when the NAV AIR
DATA SYS message is present
More information about this change is in Boeing Service Related Problem (SRP) 787 SRP-31-0057.
B787-A-31-00-0014-00A-932A-DApplicable To:
Issue 002, 14 Jun 2017End of data moduleModel 787
See Applicability of this data module
Page 19 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 20

Alert Service Bulletin B787-81205-SB310014-00
MATERIAL INFORMATION
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 10.
Description
Group 1-4:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane.
1. For Boeing provided Loadable Software (LSW) part numbers, order the LSW part number as follows:
Reference this service bulletin and submit your purchase order by one of these methods.
A. Order on-line via ATA Spec 2000 or The Boeing PART Page
B. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION.
2. For Supplier provided Loadable Software (LSW) part numbers, order the LSW part number from the
supplier.
Operators must order each instance of the Loadable Software (LSW) part numbers in Table 1 - Loadable
Software Attributes as shown in Paragraph 3.B., Parts and Materials Supplied by the Operator. The LSW
provider information is available in the Notes column of the Loadable Software Attributes Table.
2. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
Notwithstanding, Boeing will provide the supplier software referenced in this service bulletin at no charge.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B787-A-31-00-0014-00A-934A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 20 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 21

B. Parts and Materials Supplied by the Operator:
To get the parts/materials shown below, refer to Paragraph 1., Material - Price and Availability.
Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
COL45-0014-
0022
*[1] *[2] *[3] *[4] *[5]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1755836CCR GPM-L2COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1346049CCR GPM-L3COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1756643CCR GPM-R2COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1126751CCR GPM-R3COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6COL45-0014-
0022
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
COL48-0019-
0022
*[1] *[2] *[3] *[5] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
COL48-0019-
0022
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1975568CORE NET-
WORK CSM
MSD
COL48-0019-
0022
B787-A-31-00-0014-00A-934A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 21 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 22

Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1675091CORE NET-
WORK NIM
COL48-0019-
0022
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1854933GGM-1COL48-0019-
0022
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1294977GGM-2COL48-0019-
0022
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1025067GGM-3COL48-0019-
0022
*[1] *[2] *[3] *[6]31 DCA GG
DEF FILES A
DB
Displays and
Crew Alerting
(DCA) System
LS1495089GGM-4COL48-0019-
0022
*[1] *[2] *[3] *[7]45 LDI DBMaintenance
System (MS)
LS1185146CIS MS FSM
MSD-1
BCG43-45LD-
0048
*[1] *[2] *[3] *[5] *[7]45 LDI DBMaintenance
System (MS)
LS1765187CIS MS FSM
MSD-2
BCG43-45LD-
0048
*[1] *[2] *[3] *[7]45 LDI DBMaintenance
System (MS)
LS1205130CIS MS FSM-1BCG43-45LD-
0048
*[1] *[2] *[3] *[7] *[8]45 LDI DBMaintenance
System (MS)
LS1455153CIS MS FSM-2BCG43-45LD-
0048
*[1] *[2] *[3] *[7]45 LDI DBMaintenance
System (MS)
LS1696327CCR GPM-L7BCG43-45LD-
0048
*[1] *[2] *[3] *[7]45 LDI DBMaintenance
System (MS)
LS1267201CCR GPM-R7BCG43-45LD-
0048
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software part number.
*[3]  Do not mix different part numbers of this software on the airplane.
*[4]  Boeing provided loadable software. Reference part number C0L45-0014-0022 for ordering purposes.
*[5]  If the MSD-2 is installed on the airplane.
*[6]  Boeing provided loadable software. Reference part number C0L48-0019-0022 for ordering purposes.
*[7]  Boeing provided loadable software. Reference part number BCG43-45LD0048 for ordering purposes.
*[8]  If the FSM-2 is installed on the airplane.
B787-A-31-00-0014-00A-934A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 22 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 23

Table 2  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
*[1]
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
*[1]
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6*[1]
*[1]  Install a customized DCA CBP4 compatible 31 DCA ECL AMI. Refer to Boeing Service Letter 787-SL-00-008 and the ECL Technical
Newsletter.
*[2]  Do not install previous version of this software after installation of the new software.
*[3]  If the operator receives their 31 DCA ECL AMI database from Boeing, the operator will need to request a new 31 DCA ECL AMI
database compatible with the latest DCA software. Refer to 787-FTD-31-16002 for more information.
*[4]  If the operator prepares their own 31 DCA ECL AMI database, they will need to recompile their 31 DCA ECL AMI database utilizing
the Rockwell Collins Ground Based Software Tool (GBST) compatible with the latest DCA software ECL Input Database (IPDB).
Refer to 787-FTD-31-16002 for more information.
*[5]  If the CIS MS/FSM-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air
mode.
C. Parts Modified and Reidentified:
None.
B787-A-31-00-0014-00A-934A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 23 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 24

D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-31-00-0014-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-31-00-0014-00A-934A-DApplicable To:
Issue 002, 14 Jun 2017End of data moduleModel 787
See Applicability of this data module
Page 24 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 25

Alert Service Bulletin B787-81205-SB310014-00
ACCOMPLISHMENT INSTRUCTIONS
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER.
References
TitleReference
ReferencesSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 10.
ComplianceSB B787-A-31-00-0014-00A-932A-D Issue 002,
Paragraph 5.
ONBOARD DATA LOAD FUNCTION787 AMM 45-13-00
ONBOARD BOEING ELECTRONIC DISTRIBUTION
SYSTEM
787 AMM 46-13-00
AC GENERATION AND BUS CONTROL787 AMM 24-22-00
CORE NETWORK SYSTEM787 AMM 46-12-00
PRIMARY DISPLAY SYSTEM787 AMM 31-61-00
CENTRAL MAINTENANCE COMPUTING
FUNCTION
787 AMM 45-11-00
CREW INFORMATION SYSTEM/MAINTENANCE
SYSTEM FILE SERVER MODULE
787 AMM 46-12-04
FLIGHT DECK SECURITY DOOR787 AMM 52-51-00
Procedure
Group 1-4:
1. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTI-
CLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, METAL
PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE
TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER
ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-31-00-0014-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 25 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 26

2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
4. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
5. Refer to 787 AMM 45-13-00 as an accepted procedure for the Onboard Data Load Function
(ODLF) and the software check.
6. Refer to 787 AMM 46-13-00 as an accepted procedure to stage software on a Mass Storage
Device (MSD).
7. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
8. The compliance times for the actions in Step 2., Work Instructions are in Data Module SB B787-
A-31-00-0014-00A-932A-D, Paragraph 5., Compliance.
9. Some steps in the Work Instructions are labeled as Required for Compliance (RC). If this service
bulletin is mandated by an Airworthiness Directive (AD), then the steps labeled as RC, including
sub-steps under an RC step and any figures identified in an RC step, must be done to comply
with the AD. If a step or sub-step is labeled "RC Exempt," then the RC requirement is removed
from that step or sub-step. An Alternative Method of Compliance (AMOC) is required for any
deviations to RC steps, including sub-steps and identified figures. Steps not labeled as RC may
be deviated from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that the RC steps,
including sub-steps and identified figures, can still be done as specified, and the airplane can
be put back in an airworthy condition.
2. WORK INSTRUCTIONS
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 26 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 27

A. Supply electrical power to the airplane. Refer to 787 AMM 24-22-00 as an accepted procedure.
NOTE: Verify airplane has stable electrical power (two 90 KVA stingers preferred) that will not be in-
terrupted during software installation. Do not use the Auxiliary Power Unit (APU) power as the
APU power can be lost during software installation. 
B. Install the new software in accordance with the Loadable Software Attributes table below. Refer to 787
AMM 46-13-00 as an accepted procedure.
NOTE: Before the Displays and Crew Alerting (DCA) software installation, make sure the FUEL
CONTROL L (R) switches are in the CUTOFF mode. 
NOTE: This Mass Storage Device (MSD) loading Step and AMM procedure is provided for reference
only. The MSD(s) are used to store Loadable Software Airplane Parts (LSAPs) as a convenience
to operators and to minimize operational impacts of unscheduled maintenance. It is not a
Boeing or FAA/regulatory requirement to load and/or maintain (i.e. maintain in a specific con-
figuration) LSAPs on the MSD(s).  
Operators can use their own procedure to stage LSAPs on MSD(s). Boeing recommends that
operators maintain the latest airplane configuration LSAPs on the MSD(s) to make them
available if loadable LRU maintenance is required in the event of planned/unplanned component
change(s).  
Refer to Boeing Service Letter 787-SL-00-003 for more information. 
Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
COL48-0019-
0022
*[1] *[2] *[3] *[4]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
COL48-0019-
0022
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1975568CORE NET-
WORK CSM
MSD
COL48-0019-
0022
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
COL45-0014-
0022
*[1] *[2] *[3] *[4]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
COL45-0014-
0022
*[1] *[2] *[3]45 LDI DBMaintenance
System (MS)
LS1185146CIS MS FSM
MSD-1
BCG43-45LD-
0048
*[1] *[2] *[3] *[4]45 LDI DBMaintenance
System (MS)
LS1765187CIS MS FSM
MSD-2
BCG43-45LD-
0048
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 27 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 28

Table 1  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
*[4]  If the MSD-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air mode.
Group 1-4, Configuration 1:
C. Install Boeing released 31 Display Crew Alerting (DCA) Electronic Checklist 1 (ECL 1) Airline Modifiable
Information (AMI) or install custom build 31 DCA ECL 1 AMI part compatible with DCA CBP4. Refer to
787 AMM 46-13-00 as an accepted procedure.
NOTE: This Mass Storage Device (MSD) loading Step and AMM procedure is provided for reference
only. The MSD(s) are used to store Loadable Software Airplane Parts (LSAPs) as a convenience
to operators and to minimize operational impacts of unscheduled maintenance. It is not a
Boeing or FAA/regulatory requirement to load and/or maintain (i.e. maintain in a specific con-
figuration) LSAPs on the MSD(s).  
Operators can use their own procedure to stage LSAPs on MSD(s). Boeing recommends that
operators maintain the latest airplane configuration LSAPs on the MSD(s) to make them
available if loadable LRU maintenance is required in the event of planned/unplanned component
change(s).  
Refer to Boeing Service Letter 787-SL-00-003 for more information. 
Table 2  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
*[1]
*[1] *[2] *[3] *[4] *[6]
*[5]
31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
*[1]
*[1]  Install a customized DCA CBP4 compatible 31 DCA ECL AMI. Refer to Boeing Service Letter 787-SL-00-008 and the ECL Technical
Newsletter.
*[2]  Do not install previous version of this software after installation of the new software.
*[3]  If the operator receives their 31 DCA ECL AMI database from Boeing, the operator will need to request a new 31 DCA ECL AMI
database compatible with the latest DCA software. Refer to 787-FTD-31-16002 for more information.
*[4]  If the operator prepares their own 31 DCA ECL AMI database, they will need to recompile their 31 DCA ECL AMI database utilizing
the Rockwell Collins Ground Based Software Tool (GBST) compatible with the latest DCA software ECL Input Database (IPDB).
Refer to 787-FTD-31-16002 for more information.
*[5]  Configuration 1 airplanes have 31 DCA ECL 2 AMI - Empty database part number BFT57-0000-0052 installed during production
which is compatible with DCA CBP4.
*[6]  If the CIS MS/FSM-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air
mode.
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 28 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 29

Group 1-4, Configuration 2:
D. Install Boeing released 31 Display Crew Alerting (DCA) Electronic Checklist 1 (ECL 1) Airline Modifiable
Information (AMI) and 31 DCA ECL 2 AMI or install custom build 31 DCA ECL 1 AMI and 31 DCA ECL
2 AMI parts compatible with DCA CBP4. Refer to 787 AMM 46-13-00 as an accepted procedure.
NOTE: This Mass Storage Device (MSD) loading Step and AMM procedure is provided for reference
only. The MSD(s) are used to store Loadable Software Airplane Parts (LSAPs) as a convenience
to operators and to minimize operational impacts of unscheduled maintenance. It is not a
Boeing or FAA/regulatory requirement to load and/or maintain (i.e. maintain in a specific con-
figuration) LSAPs on the MSD(s).  
Operators can use their own procedure to stage LSAPs on MSD(s). Boeing recommends that
operators maintain the latest airplane configuration LSAPs on the MSD(s) to make them
available if loadable LRU maintenance is required in the event of planned/unplanned component
change(s).  
Refer to Boeing Service Letter 787-SL-00-003 for more information. 
Table 3  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
*[1]
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1185146CIS MS FSM
MSD-1
*[1]
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1765187CIS MS FSM
MSD-2
*[1]
*[1]  Install a customized DCA CBP4 compatible 31 DCA ECL AMI. Refer to Boeing Service Letter 787-SL-00-008 and the ECL Technical
Newsletter.
*[2]  Do not install previous version of this software after installation of the new software.
*[3]  If the operator receives their 31 DCA ECL AMI database from Boeing, the operator will need to request a new 31 DCA ECL AMI
database compatible with the latest DCA software. Refer to 787-FTD-31-16002 for more information.
*[4]  If the operator prepares their own 31 DCA ECL AMI database, they will need to recompile their 31 DCA ECL AMI database utilizing
the Rockwell Collins Ground Based Software Tool (GBST) compatible with the latest DCA software ECL Input Database (IPDB).
Refer to 787-FTD-31-16002 for more information.
*[5]  If the CIS MS/FSM-2 is installed on the airplane, the software is loaded to MSD-2 automatically the next time the airplane is in air
mode.
Group 1-4:
E. Before software installation:
(1) Print the Common Core System (CCS) Airplane Configuration Data (ACD) page.
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 29 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 30

(2) Obtain and record the Flight Deck Access System (FDAS) code used by the operators for emer-
gency access to the flight deck.
F. RC - Install each instance of the software listed in the Loadable Software Attributes table below and
do a software check. Refer to 787 AMM 45-13-00 as an accepted procedure. If the software check
fails, accomplish corrective actions and repeat the software check and applicable corrective actions
until the software check is passed.
NOTE: Each instance of the software listed can be loaded at the same time to all four GGMs. 
Table 4  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1854933GGM-1COL48-0019-
0022
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1294977GGM-2COL48-0019-
0022
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1025067GGM-3COL48-0019-
0022
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1495089GGM-4COL48-0019-
0022
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
G. RC - Install each instance of the software listed in the Loadable Software Attributes table below and
do a software check. Refer to 787 AMM 45-13-00 as an accepted procedure. If the software check
fails, accomplish corrective actions and repeat the software check and applicable corrective actions
until the software check is passed.
NOTE: GPM File System Erase is required only when a new GPM is installed. Do not perform General
Processor Module (GPM) File System Erase for GPMs L2, L3, L4, R2, R3 and R6. 
NOTE: It is recommended to install the software into the GPMs in one Common Computing Resource
(CCR) cabinet first and then complete the GPM software installation in the other CCR cabinet.
Installing the software in the GPMs concurrently can result in CCR cabinet re-synchronization
issues. 
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 30 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 31

Table 5  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1755836CCR GPM-L2COL45-0014-
0022
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1346049CCR GPM-L3COL45-0014-
0022
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4COL45-0014-
0022
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
H. Do the following to synchronize GPM Data:
(1) Push the L or R MFD button on the applicable Display Control Panel (DCP).
(2) Push the SYS button on the applicable DCP or Multifunction Keypad (MKP) until the systems menu
shows on the MFD.
(3) Select MAINT from the menu at the top of the status page.
(4) Select MAINT CTRL PGS from the maintenance menu.
(5) Select AIRPLANE CONFIG DATA (ACD).
(6) Select UNLOCK PAGE.
NOTE: The UNLOCK PAGE key changes to LOCK PAGE and turns green. 
(7) Select the SYNC GPM DATA key.
(8) Select CONFIRM from the menu at the bottom of the SYNC GPM DATA page.
(9) Select LOCK PAGE.
I. RC - Install each instance of the software listed in the Loadable Software Attributes table below and
do a software check. Refer to 787 AMM 45-13-00 as an accepted procedure. If the software check
fails, accomplish corrective actions and repeat the software check and applicable corrective actions
until the software check is passed.
NOTE: GPM File System Erase is required only when a new GPM is installed. Do not perform General
Processor Module (GPM) File System Erase for GPMs L2, L3, L4, R2, R3 and R6. 
NOTE: It is recommended to install the software into the GPMs in one Common Computing Resource
(CCR) cabinet first and then complete the GPM software installation in the other CCR cabinet.
Installing the software in the GPMs concurrently can result in CCR cabinet re-synchronization
issues. 
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 31 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 32

Table 6  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1756643CCR GPM-R2COL45-0014-
0022
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1126751CCR GPM-R3COL45-0014-
0022
*[1] *[2] *[3]31 DCA OPSDisplays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6COL45-0014-
0022
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
J. Do the following to synchronize GPM Data:
(1) Push the L or R MFD button on the applicable Display Control Panel (DCP).
(2) Push the SYS button on the applicable DCP or Multifunction Keypad (MKP) until the systems menu
shows on the MFD.
(3) Select MAINT from the menu at the top of the status page.
(4) Select MAINT CTRL PGS from the maintenance menu.
(5) Select AIRPLANE CONFIG DATA (ACD).
(6) Select UNLOCK PAGE.
NOTE: The UNLOCK PAGE key changes to LOCK PAGE and turns green. 
(7) Select the SYNC GPM DATA key.
(8) Select CONFIRM from the menu at the bottom of the SYNC GPM DATA page.
(9) Select LOCK PAGE.
K. RC - Install each instance of the software listed in the Loadable Software Attributes table below and
do a software check. Refer to 787 AMM 45-13-00 and 787 AMM 46-12-00 as an accepted procedure.
If the software check fails, accomplish corrective actions and repeat the software check and applicable
corrective actions until the software check is passed.
Table 7  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]31 DCA GG DEF
FILES A DB
Displays and
Crew Alerting
(DCA) System
LS1675091CORE NET-
WORK NIM
COL48-0019-
0022
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 32 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 33

Table 7  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
L. Use the ACD data printed in step E.(1) to do the Primary Display System Airplane Identification Infor-
mation AMM task. Refer to 787 AMM 31-61-00 as an accepted procedure. Once the values are entered,
make sure a GPM sync action takes place.
M. Make sure the Central Maintenance Computer (CMC) is under control of the right CMC. If not, switch
control to the right CMC. Refer to 787 AMM 45-11-00 as an accepted procedure.
N. Do the Dataload History check. Refer to 787 AMM 45-13-00 as an accepted procedure.
NOTE: The Dataload History check is to be completed before software installation on the GPMs, as
data will be erased with the LDI installation on GPMs L7 and R7. 
O. Install each instance of the software listed in the Loadable Software Attributes table below and do a
software check. Refer to 787 AMM 45-13-00 as an accepted procedure. If the software check fails,
accomplish corrective actions and repeat the software check and applicable corrective actions until the
software check is passed.
NOTE: It is recommended to install the software into the GPMs in one Common Computing Resource
(CCR) cabinet first and then complete the GPM software installation in the other CCR cabinet.
Installing the software in the GPMs concurrently can result in CCR cabinet re-synchronization
issues. 
Table 8  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]45 LDI DBMaintenance
System (MS)
LS1696327CCR GPM-L7BCG43-45LD-
0048
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
P. Do the Dataload History check. Refer to 787 AMM 45-13-00 as an accepted procedure.
NOTE: Dataload History may be deleted after the installation of the LDI software on the GPMs, so
the verification of Dataload History should be done separately for the LDI installation on each
GPM. 
Q. Switch CMC control to the left CMC.
R. Install each instance of the software listed in the Loadable Software Attributes table below and do a
software check. Refer to 787 AMM 45-13-00 as an accepted procedure. If the software check fails,
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 33 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 34

accomplish corrective actions and repeat the software check and applicable corrective actions until the
software check is passed.
NOTE: It is recommended to install the software into the GPMs in one Common Computing Resource
(CCR) cabinet first and then complete the GPM software installation in the other CCR cabinet.
Installing the software in the GPMs concurrently can result in CCR cabinet re-synchronization
issues. 
Table 9  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]45 LDI DBMaintenance
System (MS)
LS1267201CCR GPM-R7BCG43-45LD-
0048
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
S. Do the Dataload History check. Refer to 787 AMM 45-13-00 as an accepted procedure.
T. Install each instance of the software listed in the Loadable Software Attributes table below and do a
software check. Refer to 787 AMM 45-13-00 or 787 AMM 46-12-04 as an accepted procedure. If the
software check fails, accomplish corrective actions and repeat the software check and applicable cor-
rective actions until the software check is passed.
Table 10  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]45 LDI DBMaintenance
System (MS)
LS1455153CIS MS FSM-2BCG43-45LD-
0048
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
*[4]  If the FSM-2 is installed on the airplane.
U. Install each instance of the software listed in the Loadable Software Attributes table below and do a
software check. Refer to 787 AMM 45-13-00 or 787 AMM 46-12-04 as an accepted procedure. If the
software check fails, accomplish corrective actions and repeat the software check and applicable cor-
rective actions until the software check is passed.
NOTE: A Crew Information Systems (CIS) Mass Storage (MS) File Server Module (FSM) restart will
occur, causing loss of maintenance laptop session and ODLF. Wait a full 10 minutes after
seeing the Maintenance Control Display Function (MCDF) spinning wheel before trying a new
software installation. 
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 34 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 35

Table 11  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion
Data Load Desti-
nation
Part Number
*[1] *[2] *[3]45 LDI DBMaintenance
System (MS)
LS1205130CIS MS FSM-1BCG43-45LD-
0048
*[1]  This software part number is used in production.
*[2]  Do not install previous versions of this software after installation of the new software.
*[3]  Do not mix different part numbers of this software on the airplane.
Group 1-4, Configuration 1:
V. Install Boeing released 31 Display Crew Alerting (DCA) Electronic Checklist 1 (ECL 1) Airline Modifiable
Information (AMI) or install custom build 31 DCA ECL 1 AMI part compatible with DCA CBP4. Refer to
787 AMM 45-13-00 as an accepted procedure.
Table 12  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4*[1]
*[1] *[2] *[3] *[4] *[5]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6*[1]
*[1]  Install a customized DCA CBP4 compatible 31 DCA ECL AMI. Refer to Boeing Service Letter 787-SL-00-008 and the ECL Technical
Newsletter.
*[2]  Do not install previous version of this software after installation of the new software.
*[3]  If the operator receives their 31 DCA ECL AMI database from Boeing, the operator will need to request a new 31 DCA ECL AMI
database compatible with the latest DCA software. Refer to 787-FTD-31-16002 for more information.
*[4]  If the operator prepares their own 31 DCA ECL AMI database, they will need to recompile their 31 DCA ECL AMI database utilizing
the Rockwell Collins Ground Based Software Tool (GBST) compatible with the latest DCA software ECL Input Database (IPDB).
Refer to 787-FTD-31-16002 for more information.
*[5]  Configuration 1 airplanes have 31 DCA ECL 2 AMI - Empty database part number BFT57-0000-0052 installed during production
which is compatible with DCA CBP4.
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 35 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 36

Group 1-4, Configuration 2:
W. Install Boeing released 31 Display Crew Alerting (DCA) Electronic Checklist 1 (ECL 1) Airline Modifiable
Information (AMI) and 31 DCA ECL 2 AMI or install custom build 31 DCA ECL 1 AMI and 31 DCA ECL
2 AMI parts compatible with DCA CBP4. Refer to 787 AMM 45-13-00 as an accepted procedure.
Table 13  Loadable Software Attributes
NotesSoftware Part
Nomenclature
System NameSoftware Loca-
tion Identifica-
tion (SLID)
Data Load Desti-
nation
Part Number
*[1] *[2] *[3] *[4]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 1
AMI
Displays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1856054CCR GPM-L4*[1]
*[1] *[2] *[3] *[4]31 DCA ECL 2
AMI
Displays and
Crew Alerting
(DCA) System
LS1216996CCR GPM-R6*[1]
*[1]  Install a customized DCA CBP4 compatible 31 DCA ECL AMI. Refer to Boeing Service Letter 787-SL-00-008 and the ECL Technical
Newsletter.
*[2]  Do not install previous version of this software after installation of the new software.
*[3]  If the operator receives their 31 DCA ECL AMI database from Boeing, the operator will need to request a new 31 DCA ECL AMI
database compatible with the latest DCA software. Refer to 787-FTD-31-16002 for more information.
*[4]  If the operator prepares their own 31 DCA ECL AMI database, they will need to recompile their 31 DCA ECL AMI database utilizing
the Rockwell Collins Ground Based Software Tool (GBST) compatible with the latest DCA software ECL Input Database (IPDB).
Refer to 787-FTD-31-16002 for more information.
Group 1-4:
X. Do the Dataload History check. Refer to 787 AMM 45-13-00 as an accepted procedure.
Y. Use the FDAS Codes obtained in step C.(2) to do the FDAS System Test. Refer to 787 AMM 52-51-
00 as an accepted procedure.
Z. If the status message "Displays Software Config" is displayed, check the software configuration and
verify all LSAPs for this service bulletin have been loaded. Refer to 787 AMM 31-61-00 and 787 AMM
45-13-00 as an accepted procedure.
AA. If the "GPM DATA Disagree" message is displayed, do the following steps on the ACD page to synchro-
nize the GPM data. Refer to 787 AMM 31-61-00 as an accepted procedure.
(1) Select UNLOCK PAGE.
NOTE: The UNLOCK PAGE key changes to LOCK PAGE and turns green. 
(2) Select SYNC GPM DATA.
(3) Select CONFIRM from the menu at the bottom of the SYNC GPM DATA page.
(4) Select LOCK PAGE.
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017Model 787
See Applicability of this data module
Page 36 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

### Page 37

AB. Put the airplane back to a serviceable condition.
B787-A-31-00-0014-00A-933A-DApplicable To:
Issue 002, 14 Jun 2017End of data moduleModel 787
See Applicability of this data module
Page 37 of 37
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB310014-00
Issue 002, 14 Jun 2017
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
