# Boeing Alert Requirements Bulletin B787-81205-SB320048-00 RB

Copy: Revision 001 ("RB-787-SB320048-001"), 9 pages: PDF https://openairdocs.org/files/sha256/dd/7e/dd7e0e57df26a1b44debb033fcc681383dfcce5c298af58aa96ec96d7c18a02f; text https://openairdocs.org/service-documents/boeing/b787-81205-sb320048-00-rb/file/dd7e0e57df26.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2008; AD 2024-22-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB320048-00 RB
- Latest revision known: B787-81205-SB320048-00 RB, Issue 001, dated November 20, 2023 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb320048-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-22-05](https://openairdocs.org/ad/2024-22-05.md), effective Dec 31, 2024: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb320048-00-rb/proposed.md).

## Text (9 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2008; AD 2024-22-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB320048-00 RB LANDING GEAR
- Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement
Copyright © 2023 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 1 of 9
Export Controlled ECCN: 9E991
See page 1 for details
4.0
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 2 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-1168 in 1 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability
means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8, 787-9 and 787-10 Airplanes-1
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA144
1ZA152 - ZA156
1ZA175 - ZA189
1ZA195 - ZA204
1ZA215 - ZA225
1ZA230 - ZA256
1ZA260 - ZA277
1ZA285 - ZA296
1ZA317 - ZA324
GroupVariable Number
1ZA327
1ZA334 - ZA335
1ZA341 - ZA342
1ZA380 - ZA389
1ZA430 - ZA439
1ZA445 - ZA489
1ZA506 - ZA516
1ZA536 - ZA545
1ZA560 - ZA567
1ZA576 - ZA580
1ZA586
1ZA588 - ZA593
GroupVariable Number
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655 - ZA663
1ZA665 - ZA677
1ZA680 - ZA685
1ZA695 - ZA698
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 3 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZA817 - ZA831
1ZA839
1ZA841 - ZA842
1ZA846 - ZA848
1ZA853 - ZA864
1ZA873 - ZA876
1ZA881 - ZA888
1ZA916 - ZA920
1ZA949 - ZA950
1ZA954 - ZA959
1ZA963 - ZA966
1ZA968 - ZA972
1ZA980 - ZA981
1ZA990
1ZB001 - ZB012
1ZB021 - ZB043
1ZB047 - ZB061
1ZB077 - ZB081
1ZB097 - ZB121
1ZB127 - ZB136
1ZB167 - ZB191
1ZB197 - ZB198
1ZB217
1ZB219 - ZB220
1ZB224 - ZB229
1ZB234 - ZB242
1ZB246 - ZB248
1ZB251 - ZB258
1ZB261 - ZB262
1ZB265 - ZB282
1ZB299
GroupVariable Number
1ZB302 - ZB305
1ZB332 - ZB338
1ZB362 - ZB379
1ZB407 - ZB435
1ZB446 - ZB467
1ZB536 - ZB543
1ZB545 - ZB547
1ZB558 - ZB587
1ZB603 - ZB618
1ZB646 - ZB649
1ZB656 - ZB669
1ZB676 - ZB681
1ZB688 - ZB707
1ZB733 - ZB735
1ZB738 - ZB740
1ZB742 - ZB745
1ZB749 - ZB751
1ZB753 - ZB757
1ZB763 - ZB769
1ZB771 - ZB775
1ZB778 - ZB821
1ZB828 - ZB845
1ZB858 - ZB863
1ZB874 - ZB876
1ZB887
1ZB890
1ZB893 - ZB922
1ZB924
1ZB926 - ZB927
1ZB934 - ZB952
1ZB967 - ZB971
GroupVariable Number
1ZB977 - ZB991
1ZB993 - ZB997
1ZC001 - ZC022
1ZC036 - ZC056
1ZC061 - ZC070
1ZC101 - ZC107
1ZC116 - ZC118
1ZC126 - ZC129
1ZC151 - ZC152
1ZC155 - ZC162
1ZC165
1ZC170 - ZC173
1ZC211 - ZC219
1ZC221 - ZC228
1ZC236 - ZC241
1ZC276
1ZD001 - ZD009
1ZD012 - ZD029
1ZD038
1ZD048 - ZD049
1ZE001 - ZE010
1ZE013 - ZE014
1ZE016 - ZE019
1ZE031 - ZE032
1ZE040 - ZE048
1ZE075
1ZE085 - ZE086
1ZE090 - ZE091
1ZE095 - ZE097
1ZE100
1ZE105 - ZE108
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 4 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

GroupVariable Number
1ZE110 - ZE112
1ZE115
1ZE150
1ZE165 - ZE166
1ZE170 - ZE171
1ZE195 - ZE198
1ZE220 - ZE241
1ZE270 - ZE273
GroupVariable Number
1ZE310 - ZE315
1ZE340 - ZE341
1ZE350 - ZE362
1ZE375
1ZE380 - ZE381
1ZE383 - ZE384
1ZE415 - ZE420
1ZE425 - ZE428
GroupVariable Number
1ZE435 - ZE437
1ZE455 - ZE456
1ZE481
1ZE486 - ZE488
1ZE491 - ZE493
1ZE581
1ZE586
1ZE601 - ZE602
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Material Information - Paragraph 3., Part Necessary for Each Airplane for the
recommended action.
Table 3  
Serial NumberPart Number
19ZHQ00772513Z2010-501
19ZHQ00773
19ZHQ00890
19ZHQ00891
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
Requirements Bulletin B787-81205-SB320048-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB320048-00 RB mandatory.
Do the required actions based on the applicable condition(s) in Table 5, in accordance with Accomplishment
Instructions.
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 5 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

Table 5  Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement
Repeat Interval (Not
to Exceed)
Boeing Recommended Compliance TimeActionCondition
-Whichever occurs later,Do a check of mainte-
nance records or an
inspection of the
drag brace lower lock
link assembly on the
right and left side
MLG for affected seri-
al numbers
19ZHQ00772,
19ZHQ00773,
19ZHQ00890, and
19ZHQ00891
All Airplanes
1. Within 48 months after the Issue 001 date
of Requirements Bulletin B787-81205-
SB320048-00 RB.
2. Within 48 months after the date of is-
suance of the original standard certificate
of airworthiness or the original export certifi-
cate of airworthiness
-Whichever occurs later,Replace the affected
drag brace lower lock
link assembly on the
MLG with a service-
able drag brace low-
er lock link assem-
bly.*[1]
CONDITION 1: ANY
DRAG BRACE
LOWER LOCK LINK
ASSEMBLY WITH
AFFECTED SERIAL
NUMBER FOUND.
1. Within 48 months after the Issue 001 date
of Requirements Bulletin B787-81205-
SB320048-00 RB.
2. Within 48 months after the date of is-
suance of the original standard certificate
of airworthiness or the original export certifi-
cate of airworthiness
--No further action re-
quired.
CONDITION 2: NO
DRAG BRACE
LOWER LOCK LINK
ASSEMBLY WITH
AFFECTED SERIAL
NUMBER FOUND.
*[1]  A serviceable drag brace lower lock link assembly is an assembly that does not have S/N: 19ZHQ00772, 19ZHQ00773, 19ZHQ00890
or 19ZHQ00891, conforms to approved type design, and is in a condition for safe operation.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 6 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. If the length of any fastener specified in this service bulletin does not meet the installation
standards in SRM Chapter 51, then a fastener of the same specification, or an approved
substitute, with a length which meets the installation standards in SRM Chapter 51 may
be used. In addition, washers may be installed for fastener grip length in accordance with
SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws)
needed for installation in this service bulletin.
6. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
7. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 7 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

8. Use of colors in Tasks is based on guidance from the S1000D International specification
for technical publications.
9. Use the approved fastener, process and material substitutions in accordance with SRM
Chapter 51.
10. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Table 1  Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement
Refer to the listed proce-
dures in SB B787-81205-
SB320048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1 - MAIN LANDING
GEAR RIGHT SIDE AND
LEFT SIDE DRAG BRACE
LOWER LOCK LINK AS-
SEMBLY SERIAL NUM-
BER INSPECTION
-Do a check of mainte-
nance records or an inspec-
tion of the drag brace low-
er lock link assembly on
the right and left side MLG
for affected serial numbers
19ZHQ00772,
19ZHQ00773,
19ZHQ00890, and
19ZHQ00891.
All Airplanes
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 8 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Table 1  Main Landing Gear - Drag Brace Lower Lock Link Assembly Replacement
Refer to the listed proce-
dures in SB B787-81205-
SB320048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2 - GET ACCESS
TO THE MAIN LANDING
GEAR DRAG BRACE
LOWER LOCK LINK AS-
SEMBLY
-Replace the affected drag
brace lower lock link as-
sembly on the MLG with a
serviceable drag brace
lower lock link assem-
bly.*[1]
CONDITION 1: ANY
DRAG BRACE LOWER
LOCK LINK ASSEMBLY
WITH AFFECTED SERIAL
NUMBER FOUND.
PART 3 - MAIN LANDING
GEAR - RIGHT SIDE
DRAG BRACE LOWER
LOCK LINK ASSEMBLY -
REPLACEMENT
-
PART 4 - MAIN LANDING
GEAR - LEFT SIDE DRAG
BRACE LOWER LOCK
LINK ASSEMBLY - RE-
PLACEMENT
-
PART 5 - CLOSE AC-
CESS TO THE MAIN
LANDING GEAR DRAG
BRACE LOWER LOCK
LINK ASSEMBLY
-
--No further action required.CONDITION 2: NO DRAG
BRACE LOWER LOCK
LINK ASSEMBLY WITH
AFFECTED SERIAL
NUMBER FOUND.
*[1]  A serviceable drag brace lower lock link assembly is an assembly that does not have S/N: 19ZHQ00772, 19ZHQ00773, 19ZHQ00890
or 19ZHQ00891, conforms to approved type design, and is in a condition for safe operation.
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
Page 9 of 9
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB320048-00 RB
Issue 001, 20 Nov 2023 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
