# Boeing Service Bulletin B787-81205-SB530025-00

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 002 ("SB B787-81205-SB530025-00 Issue 002"), 31 pages: PDF https://openairdocs.org/files/sha256/b0/ab/b0ab9c9c99791ca444398734f5676a673a9df8241c9fccee961855d17b422e84; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530025-00/file/b0ab9c9c9979.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-6672; AD 2016-22-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001 ("SB B787-81205-SB530025-00 Issue 001"), 32 pages: PDF https://openairdocs.org/files/sha256/bd/3a/bd3a2d28d0559fd2d75281831b415a639f5ca280c119ddeb3b763b8a425bc74c; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530025-00/file/bd3a2d28d055.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-6672; AD 2016-22-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB530025-00
- Latest revision known: B787-81205-SB530025-00, Issue 002, dated June 2, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530025-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-22-17](https://openairdocs.org/ad/2016-22-17.md), effective Dec 27, 2016: Revisions 001 and 002

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530025-00/proposed.md).

## Text (31 pages)

Revision 002, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-6672; AD 2016-22-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin B787-81205-SB530025-00 FUSELAGE - Fuselage Section
41 - Passenger/Entry Door Surround - Grounding Jumper Configuration
Change
Issue 002, 02 Jun 2016B787-81205-SB530025-00Publication:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2014 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
The applicability information below is referenced at the lower left of each page to indicate the page applicability.
These references are valid for this print copy only.
PM Applicability (Publication Module applicability)
787-8 Airplanes. Refer to Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 1., Effectivity for the
list of affected airplanes.
B787-81205-SB530025-00TITLE PAGE
Issue 002, 02 Jun 2016
Page 1 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
2.0
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 2

Service Bulletin B787-81205-SB530025-00
Table of Contents
Page
Revision Transmittal Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PLANNING INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. Effectivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
A. Airplanes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
B. Spares Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Concurrent Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3. Reason  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Approval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Manpower  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. Weight and Balance Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. Electrical Load Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10. References  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
A. Existing Data:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B. Data Supplied with this Service Bulletin:  . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:  . . . 15
11. Publications Affected  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. Interchangeability and Intermixability of Parts  . . . . . . . . . . . . . . . . . . . . . . . . . 16
13. Software Accomplishment Summary  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MATERIAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1. Material - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Industry Support Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Parts Necessary for Each Airplane  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
A. Kits/Parts:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. Parts and Materials Supplied by the Operator:  . . . . . . . . . . . . . . . . . . . . . . . 17
C. Parts Modified and Reidentified:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
D. Parts Removed and Not Replaced:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4. Parts Necessary to Change Spares  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. Special Tooling - Price and Availability  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6. Special Tooling Necessary to do this Service Bulletin  . . . . . . . . . . . . . . . . . . . . . 18
ACCOMPLISHMENT INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1. GENERAL INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. WORK INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Task 1 – LEFT PASSENGER DOOR GROUNDING JUMPER CONFIGURATION CHANGE [Group 1:] . 22
Task 2 – RIGHT PASSENGER DOOR GROUNDING JUMPER CONFIGURATION CHANGE [Group 1:]. 27
B787-81205-SB530025-00TABLE OF CONTENTS
Issue 002, 02 Jun 2016
Page 2 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 3

Service Bulletin B787-81205-SB530025-00
List of Illustrations
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
Description
Group 1:
Table 1  List of Illustrations - Service Bulletin B787-81205-SB530025-00
Used InICN
B787-A-53-00-0025-00A-931C-D Issue 002ICN-B787-A-000061-A-81205-11761-A-01-1
B787-A-53-00-0025-01A-933B-D Issue 002ICN-B787-A-000061-A-81205-11762-A-01-1
B787-A-53-00-0025-01A-933B-D Issue 002ICN-B787-A-000061-A-81205-11763-A-01-1
B787-A-53-00-0025-02A-933B-D Issue 002ICN-B787-A-000061-A-81205-11764-A-01-1
B787-A-53-00-0025-02A-933B-D Issue 002ICN-B787-A-000061-A-81205-11765-A-01-1
B787-A-53-00-0025-00A-00AA-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 3 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 4

Service Bulletin B787-81205-SB530025-00
List of Effective Data Modules
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
Description
Group 1:
Table 1  List of Effective Data Modules - Service Bulletin B787-81205-SB530025-00
Issue DateIssue StatusIssueData Module – Information Name
2016-06-02Changed002B787-A-53-00-0025-00A-00AA-D – List of Illustrations
2016-06-02Changed002B787-A-53-00-0025-00A-00SA-D – List of Effective Data Modules
2016-06-02New001B787-A-53-00-0025-00A-931B-D – Revision Transmittal Information
2016-06-02Changed002B787-A-53-00-0025-00A-931C-D – Summary
2016-06-02Changed002B787-A-53-00-0025-00A-932A-D – PLANNING INFORMATION
2016-06-02Changed002B787-A-53-00-0025-00A-934A-D – MATERIAL INFORMATION
2016-06-02Changed002B787-A-53-00-0025-00A-933A-D – ACCOMPLISHMENT INSTRUCTIONS
2016-06-02Changed002B787-A-53-00-0025-01A-933B-D – Task 1 – LEFT PASSENGER DOOR
GROUNDING JUMPER CONFIGURATION CHANGE [Group 1:]
2016-06-02Changed002B787-A-53-00-0025-02A-933B-D – Task 2 – RIGHT PASSENGER DOOR
GROUNDING JUMPER CONFIGURATION CHANGE [Group 1:]
B787-A-53-00-0025-00A-00SA-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 4 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 5

Service Bulletin B787-81205-SB530025-00
Revision Transmittal Information
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
Service Bulletin
B787-81205-SB530025-00 – Summary
SB B787-A-53-00-0025-00A-931C-D Issue 002
ReasonSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 3.
ComplianceSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 5.
ReferencesSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 10.
General InformationSB B787-A-53-00-0025-00A-933A-D Issue 002, Step 1.
Work InstructionsSB B787-A-53-00-0025-00A-933A-D Issue 002, Step 2.
Service Bulletin B787-81205-SB530025-00 – Task
1 – LEFT PASSENGER DOOR GROUNDING
JUMPER CONFIGURATION CHANGE [Group 1:]
SB B787-A-53-00-0025-01A-933B-D Issue 002
Service Bulletin B787-81205-SB530025-00 – Task
2 – RIGHT PASSENGER DOOR GROUNDING
JUMPER CONFIGURATION CHANGE [Group 1:]
SB B787-A-53-00-0025-02A-933B-D Issue 002
AirplanesSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 1.A.
Description
Group 1:
This revision includes all pages of the service bulletin.
1. COMPLIANCE INFORMATION RELATED TO THIS REVISION
Effects of this revision on Airplanes on which Issue 001 was previously done:
None
B787-A-53-00-0025-00A-931B-DApplicable To:
Issue 001, 02 Jun 2016Model 787
See Applicability of this data module
Page 5 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 6

2. REASON FOR REVISION
This issue is sent to clarify instructions in this service bulletin as a result of feedback reported by operators
after incorporation of the Issue 001 of this service bulletin on their fleet and to specify the category of fay
seal application. This issue is also sent to inform operators that the FAA plans to issue an Airworthiness
Directive to address the issue corrected in this service bulletin.
These sections were changed:
1. Data Module Summary, SB B787-A-53-00-0025-00A-931C-D - Updated Background section to conform
to AD friendly requirements as a result of a planned AD.
2. Data Module Summary, SB B787-A-53-00-0025-00A-931C-D - Added validation information to Background
section.
3. Data Module Summary, SB B787-A-53-00-0025-00A-931C-D - Updated the AD Related column in the
planning data table as a result of a planned AD.
4. Data Module Summary, SB B787-A-53-00-0025-00A-931C-D - Updated the Compliance section to add
a statement that the FAA plans to mandate the tasks and times included in the service bulletin.
5. Data Module Summary, SB B787-A-53-00-0025-00A-931C-D - Updated Summary illustration to add
colors based on guidance from the S1000D International specification for technical publications.
6. Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 3., Reason - Updated Reason section to
conform to AD friendly requirements.
7. Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 5., Compliance - Updated the Compliance
section to add a statement that the FAA plans to mandate the tasks and times included in the service
bulletin.
8. Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 10., References - Updated Reference
section.
9. Data Module SB B787-A-53-00-0025-00A-933A-D, Step 1., General Information - Added new notes to
the General Information section.
10. Data Module SB B787-A-53-00-0025-00A-933A-D, Step 2., Work Instructions - Added new Steps 2.B,
2.C and 2.H to allow for removal of the Attendant Seats for better access.
11. Data Module SB B787-A-53-00-0025-00A-933A-D, Step 2., Work Instructions - Identified Step 2.E as
required for compliance as a result of a planned AD.
12. Data Module SB B787-A-53-00-0025-00A-933A-D, Step 2., Work Instructions - Re-Numbered Steps
2.D to 2.H as a result of adding new Steps 2.B and 2.C.
13. Data Module Task 1, SB B787-A-53-00-0025-01A-933B-D - Updated illustrations, Step Table and
Footnotes in Task 1 to clarify engineering procedures.
14. Data Module Task 2, SB B787-A-53-00-0025-02A-933B-D - Updated illustrations, Step Table and
Footnotes in Task 2 to clarify engineering procedures.
Change marks are added, except in Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 1.A.,
Airplanes and format changes, to show the location of all content changes.
B787-A-53-00-0025-00A-931B-DApplicable To:
Issue 001, 02 Jun 2016Model 787
See Applicability of this data module
Page 6 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 7

3. REVISION HISTORY
Table 1  
July 17, 2014Issue 1:
June 02, 2016Issue 2:
B787-A-53-00-0025-00A-931B-DApplicable To:
Issue 001, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 7 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 8

Service Bulletin B787-81205-SB530025-00
Summary
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
Spares AffectedSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 1.B.
ComplianceSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 5.
Weight and Balance ChangesSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 8.
Electrical Load DataSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 9.
Publications AffectedSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 11.
Kits/PartsSB B787-A-53-00-0025-00A-934A-D Issue 002,
Paragraph 3.A.
Parts and Materials Supplied by the OperatorSB B787-A-53-00-0025-00A-934A-D Issue 002,
Paragraph 3.B.
Special Tooling Necessary to do this Service BulletinSB B787-A-53-00-0025-00A-934A-D Issue 002,
Paragraph 6.
EffectivitySB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 1.
Industry Support InformationSB B787-A-53-00-0025-00A-934A-D Issue 002,
Paragraph 2.
Description
Group 1:
1. CONCURRENT REQUIREMENTS
None.
B787-A-53-00-0025-00A-931C-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 8 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 9

2. BACKGROUND
This service bulletin is sent to change the bond configuration on the grounding jumper between the Environ-
mental Control System (ECS) bracket and the Current Return Network (CRN) strap near passenger entry
doors 1L and 1R. The existing bond configuration does not ground the door frame structure in the event of
an electrical equipment fault. If this service bulletin is not accomplished, the door frame structure will not be
correctly grounded which could result in an electrical short and a shock hazard to passengers and personnel.
The grounding jumper was not bonded correctly during manufacture. Engineering documentation did not
include applying an electrical bond between the ECS bracket and CRN strap.
This service bulletin provides instructions to change the configuration of the grounding jumper and applying
the necessary electrical bond the grounding jumper.
Boeing Service Related Problem (SRP) 787 SRP-53-0450 is related to this service bulletin.
As part of a service bulletin validation program, this change was completed on airplane ZA117 by Service
Bulletin 787-53-0025 Issue 001 before Issue 002 of this service bulletin. The change completed on airplane
ZA117 by Service Bulletin 787-53-0025 Issue 001 is equivalent to Issue 002 of this service bulletin. Airplane
ZA117 has the configuration of a Group 1 airplane.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more in-
formation.
Table 1  
Data Module ReferenceAffectedPlanning Data
Data Module SB B787-A-53-00-0025-00A-932A-
D, Paragraph 1.B., Spares Affected
NoSpares Affected
Data Module SB B787-A-53-00-0025-00A-932A-
D, Paragraph 5., Compliance
YesAD Related
Data Module SB B787-A-53-00-0025-00A-932A-
D, Paragraph 8., Weight and Balance Changes
NoWeight and Balance Changed
Data Module SB B787-A-53-00-0025-00A-932A-
D, Paragraph 9., Electrical Load Data
NoElectrical Load Changed
Data Module SB B787-A-53-00-0025-00A-932A-
D, Paragraph 11., Publications Affected
YesPublications Affected
Data Module SB B787-A-53-00-0025-00A-932A-
D, Paragraph 11., Publications Affected
NoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Data Module SB B787-A-53-00-0025-00A-934A-
D, Paragraph 3.A., Kits/Parts
NoKits/Parts Required
Data Module SB B787-A-53-00-0025-00A-934A-
D, Paragraph 3.B., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Data Module SB B787-A-53-00-0025-00A-934A-
D, Paragraph 6., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
B787-A-53-00-0025-00A-931C-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 9 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 10

3. ACTION
(CN-AA45260B)
Remove the floor mats and floor panels in the entry way of passenger entry doors 1L and 1R. Change the
configuration of the grounding jumpers. Reinstall the floor mats and floor panels.
4. EFFECTIVITY
787-8 Airplanes. Refer to Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 1., Effectivity for
the list of affected airplanes.
5. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 12 months after the Issue
001 date of this service bulletin.
6. INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of October 8, 2013. Please refer to
Data Module SB B787-A-53-00-0025-00A-934A-D, Paragraph 2., Industry Support Information. The warranty
remedies will expire eight years from the original release date of this service bulletin.
7. MANPOWER
Table 2  
Elapsed HoursTotal Task HoursAirplanes
6.006.00All
8. MATERIAL INFORMATION
None.
B787-A-53-00-0025-00A-931C-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 10 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 11 (OCR)

@ BOEING  B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN
00000000
REMOVE THE FLOOR MAT
AND FLOOR PANELS IN THE
ENTRY DOORS 1L AND 1R.
CHANGE THE CONFIGURA-
TION OF THE GROUNDING
JUMPERS. REINSTALL THE
FLOOR MATS AND FLOOR
PANELS.
LEFT SIDE SHOWN. RIGHT SIDE OPPOSITE
ICN-B787-A-000061-A-81205-11761-A-01-1
Figure 1
Applicable To:  B787-A-53-00-0025-00A-931C-D
Model 787  End of data module  Issue 002, 02 Jun 2016
See Applicability of this data module
Page 11 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 12

Service Bulletin B787-81205-SB530025-00
PLANNING INFORMATION
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
Service Bulletin B787-81205-SB530025-00 – Task
1 – LEFT PASSENGER DOOR GROUNDING
JUMPER CONFIGURATION CHANGE [Group 1:]
SB B787-A-53-00-0025-01A-933B-D Issue 002
Service Bulletin B787-81205-SB530025-00 – Task
2 – RIGHT PASSENGER DOOR GROUNDING
JUMPER CONFIGURATION CHANGE [Group 1:]
SB B787-A-53-00-0025-02A-933B-D Issue 002
BOLT AND NUT INSTALLATIONSOPM 20-50-01
Standard Wiring Practices ManualSWPM 20-20-00
Standard Wiring Practices ManualSWPM 20-20-10
ATTENDANT SEAT AND COMPONENTS787 AMM 25-25-06
FLOOR MAT787 AMM 25-27-02
FLOOR PANEL787 AMM 53-01-01
Description
Group 1:
1. Effectivity
A. Airplanes
This service bulletin is applicable to 787-8 Airplanes, line numbers 7-9, 23-24, 27, 29, 31, 33, 35, 37-
38, 40-42, 44-71, 74-75, 77-78, 80, 82, 84 in 1 Group. The Variable Numbers and Group information
for the applicable airplanes is given below. Refer to CN-AA45260 for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes that were delivered with bonding jumpers with an in-
correct configuration installed under the floor near passenger entry
doors 1L and 1R.
-1
Airplane Models: 787-8
B787-A-53-00-0025-00A-932A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 12 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 13

Table 2  
GroupVariable Number
1ZA100-ZA105
1ZA116-ZA119
1ZA135
1ZA177-ZA183
1ZA233
1ZA236-ZA240
1ZA261-ZA264
1ZA270-ZA271
1ZA285-ZA290
1ZA460-ZA464
1ZA506-ZA511
1ZA536-ZA538
B. Spares Affected
None.
2. Concurrent Requirements
None.
3. Reason
This service bulletin is sent to change the bond configuration on the grounding jumper between the Envi-
ronmental Control System (ECS) bracket and the Current Return Network (CRN) strap near passenger
entry doors 1L and 1R. The existing bond configuration does not ground the door frame structure in the
event of an electrical equipment fault. If this service bulletin is not accomplished, the door frame structure
will not be correctly grounded which could result in an electrical short and a shock hazard to passengers
and personnel.
The grounding jumper was not bonded correctly during manufacture. Engineering documentation did not
include applying an electrical bond between the ECS bracket and CRN strap.
This service bulletin provides instructions to change the configuration of the grounding jumper and applying
the necessary electrical bond the grounding jumper.
Boeing Service Related Problem (SRP) 787 SRP-53-0450 is related to this service bulletin.
Issue 002 is sent to clarify instructions in this service bulletin as a result of feedback reported by operators
after incorporation of the Issue 001 of this service bulletin on their fleet and to specify the category of fay
seal application. This issue is also sent to inform operators that the FAA plans to issue an Airworthiness
Directive to address the issue corrected in this service bulletin.
B787-A-53-00-0025-00A-932A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 13 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 14

4. Description
Remove the floor mats and floor panels in the entry way of passenger entry doors 1L and 1R. Change the
configuration of the grounding jumpers. Reinstall the floor mats and floor panels.
Effects of this revision on Airplanes on which Issue 001 was previously done:
None
The work in this service bulletin is done in the maintenance zone(s) given below.
Table 3  
Affected Maintenance Zones
ZoneModel
221, 222787-8
5. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service
bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 12 months after the Issue
001 date of this service bulletin.
6. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved air-
planes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before
incorporating this service bulletin.
7. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane. This
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour
data if necessary. The estimate does not include lost time. These are some examples of lost time:
– Time to adjust to the workplace
– Time to schedule the work
– Time to inspect the work
– Time to cure the materials
– Time to make the parts
– Time to find the tools
B787-A-53-00-0025-00A-932A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 14 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 15

Table 4  
Elapsed HoursTask HoursNumber of Per-
sons
Task
2.502.501Open Access
0.500.501Data Module Task
1, SB B787-A-53-
00-0025-01A-933B-
D
0.500.501Data Module Task
2, SB B787-A-53-
00-0025-02A-933B-
D
2.502.501Close Access
6.006.00TOTAL FOR EACH AIRPLANE
8. Weight and Balance Changes
None.
9. Electrical Load Data
Not changed.
10. References
A. Existing Data:
1. Change Notice CN-AA45260A and CN-AA45260B
2. Aircraft Maintenance Manual (AMM) 787 AMM 25-25-06 , 787 AMM 25-27-02, 787 AMM 53-01-
01
3. Boeing Service Related Problem (SRP) 787 SRP-53-0450
4. Standard Overhaul Practices Manual (SOPM) SOPM 20-50-01
5. Standard Wiring Practices Manual (SWPM) SWPM 20-20-00, SWPM 20-20-10
B. Data Supplied with this Service Bulletin:
None.
C. Installation Requirement Modules Used in the Preparation of this Service Bulletin:
None.
B787-A-53-00-0025-00A-932A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 15 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 16

11. Publications Affected
Table 5  
Chapter-SectionPublication
ZA2-21
ZA2-22
787 Illustrated Parts Data
Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance
Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
12. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
13. Software Accomplishment Summary
Not Affected.
B787-A-53-00-0025-00A-932A-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 16 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 17

Service Bulletin B787-81205-SB530025-00
MATERIAL INFORMATION
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
ReferencesSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 10.
Description
Group 1:
1. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 3., Parts Necessary for Each Airplane.
As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin does not show
the Boeing price and supply data.
2. Industry Support Information
Boeing warranty remedies are available for 787 airplanes in warranty as of October 8, 2013. For task hour
and material reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Fleet
Support Contracts - Warranty. The warranty remedies will expire eight years from the original release date
of this service bulletin.
3. Parts Necessary for Each Airplane
A. Kits/Parts:
None.
B. Parts and Materials Supplied by the Operator:
Table 1  
NotesNameQTYPart Number /
Specification
*[1] *[2]Bolt, Permanent, Hex Drive, Protrud-
ing Tension Head
2BACB30NX6K8
*[1] *[2]BOLT, HEX DRIVE2BACB30NX8K9
*[1] *[2]NUT, SELF-LOCKING2BACN10YT3K
*[1] *[2]NUT, SELF-LOCKING2BACN10YT4K
B787-A-53-00-0025-00A-934A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 17 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 18

Table 1  
NotesNameQTYPart Number /
Specification
*[1] *[2]WASHER4NAS1149D0316H
*[2]SEALANT-BMS5-45, Class B
*[1]  Refer to 787 Structural Repair Manual Chapter 51 for alternate fasteners.
*[2]  See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
C. Parts Modified and Reidentified:
None.
D. Parts Removed and Not Replaced:
None.
4. Parts Necessary to Change Spares
None.
5. Special Tooling - Price and Availability
None.
6. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and
overhaul tools in the manuals given in Data Module SB B787-A-53-00-0025-00A-932A-D, Paragraph 10.,
References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
B787-A-53-00-0025-00A-934A-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 18 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 19

Service Bulletin B787-81205-SB530025-00
ACCOMPLISHMENT INSTRUCTIONS
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
ReferencesSB B787-A-53-00-0025-00A-932A-D Issue 002,
Paragraph 10.
Service Bulletin B787-81205-SB530025-00 – Task
1 – LEFT PASSENGER DOOR GROUNDING
JUMPER CONFIGURATION CHANGE [Group 1:]
SB B787-A-53-00-0025-01A-933B-D Issue 002
Service Bulletin B787-81205-SB530025-00 – Task
2 – RIGHT PASSENGER DOOR GROUNDING
JUMPER CONFIGURATION CHANGE [Group 1:]
SB B787-A-53-00-0025-02A-933B-D Issue 002
BOLT AND NUT INSTALLATIONSOPM 20-50-01
FLOOR MAT787 AMM 25-27-02
ATTENDANT SEAT AND COMPONENTS787 AMM 25-25-06
FLOOR PANEL787 AMM 53-01-01
Procedure
Group 1:
1. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTI-
CLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, METAL
PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE
TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER
ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Data Module SB B787-A-53-00-0025-00A-
932A-D, Paragraph 10., References, for definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus
0.03 inch
B787-A-53-00-0025-00A-933A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 19 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 20

– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft Main-
tenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring
Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft Mainte-
nance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable instal-
lation step.
4. Use the approved fastener, process and material substitutions in accordance with SRM Chapter
51.
5. If the length of any fastener specified in this service bulletin does not meet the installation
standards in SRM Chapter 51, then a fastener of the same specification, or an approved substi-
tute, with a length which meets the installation standards in SRM Chapter 51 may be used. In
addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51.
Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation
in this service bulletin.
6. These work instructions refer to procedures included in other Boeing documents. When the
words "refer to" are used and the operator has an accepted alternative procedure, the accepted
alternative procedure can be used. When the words "in accordance with" are included in the
instruction, the procedure in the Boeing document must be used.
7. The instructions in Step 2., Work Instructions and the Tasks can include operation of tools or
test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual,
and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools
or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to
use superseded tools.
8. If it is necessary to remove more parts for access, you can remove those parts. If you can get
access without removing identified parts, it is not necessary to remove all of the identified parts.
Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable part with
the same part number can be installed as an alternative to the kept part.
10. If shading is used, shaded areas in Tasks are to separate the non-critical and non-authoritative
information from the critical and authoritative information.
11. Use of colors in Tasks is based on guidance from the S1000D International specification for
technical publications.
12. Some steps in the Work Instructions are labeled as Required for Compliance (RC). If this service
bulletin is mandated by an Airworthiness Directive (AD), then the steps labeled as RC, including
sub-steps under an RC step and any figures identified in an RC step, must be done to comply
with the AD. An Alternative Method of Compliance (AMOC) is required for any deviations to RC
B787-A-53-00-0025-00A-933A-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 20 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 21

steps, including sub-steps and identified figures. Steps not labeled as RC may be deviated from
using accepted methods in accordance with the operator's maintenance or inspection program
without obtaining approval of an AMOC. This is provided that the RC steps, including sub-steps
and identified figures, can still be done as specified, and the airplane can be put back in an air-
worthy condition.
2. WORK INSTRUCTIONS
A. Remove the floor mats in the entryway of passenger doors 1L and 1R. Refer to 787 AMM 25-27-02 as
an accepted procedure.
B. If necessary, remove the Section 41 Left Side attendant seat. Refer to 787 AMM 25-25-06 as an accepted
procedure.
C. If necessary, remove the Section 41 Right Side attendant seat. Refer to 787 AMM 25-25-06 as an ac-
cepted procedure.
D. Remove the floor panels in the entryway of passenger doors 1L and 1R. Refer to 787 AMM 53-01-01
as an accepted procedure.
E. RC - Change the configuration of the grounding jumpers connecting the Environmental Control System
(ECS) ducts and stabilizer straps to the Current Return Network (CRN) in accordance with the table
below:
Table 1  
Passenger Door 1RPassenger Door 1L
Data Module Task 2, SB B787-A-53-00-0025-02A-
933B-D
Data Module Task 1, SB B787-A-53-00-0025-01A-
933B-D
F. Install the floor panels in the entryway of passenger doors 1L and 1R. Refer to 787 AMM 53-01-01 as
an accepted procedure.
G. Install the floor mats in the entryway of passenger doors 1L and 1R. Refer to 787 AMM 25-27-02 as an
accepted procedure.
H. If removed, install the Section 41 Left or Right Side attendant seat. Refer to 787 AMM 25-25-06 as an
accepted procedure.
I. Put the airplane back to a serviceable condition.
B787-A-53-00-0025-00A-933A-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 21 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 22

Service Bulletin B787-81205-SB530025-00
Task 1 – LEFT PASSENGER DOOR GROUNDING JUMPER CONFIGURATION
CHANGE [Group 1:]
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
Standard Wiring Practices ManualSWPM 20-20-00
Standard Wiring Practices ManualSWPM 20-20-10
Preliminary Requirements
Required Conditions
Data Module/Technical PublicationAction/Condition
B787-A-53-00-0025-00A-933A-D Issue 002Service Bulletin B787-81205-SB530025-00 -
ACCOMPLISHMENT INSTRUCTIONS
B787-A-53-00-0025-01A-933B-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 22 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 23 (OCR)

A BOEING  B787-81205-SB530025-00  Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN
Procedure
This Task applies to Group 1:
000000000
DOOR 1L
ICN-B787-A-000061-A-81205-11762-A-01-1
Figure 1
Applicable To:  B787-A-53-00-0025-01A-933B-D
Model 787  Issue 002, 02 Jun 2016
See Applicability of this data module
Page 23 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 24 (OCR)

Q BOEING  B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN
STABILIZATION
STRAP
BONDING
• JUMPER
2476674
ICN-B787-A-000061-A-81204  1763-A-01-1
Figure 2
Applicable To:  B787-A-53-00-0025-01A-933B-D
Model 787  Issue 002, 02 Jun 2016
See Applicability of this data module
Page 24 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 25

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this task.
Table 1  
More DataQtyIdentificationNameActionStep
1BACS38K6TIE STRAPRemove / Keep1
1-BOLTRemove2
1-NUTRemove
1-BOLTRemove3
2-WASHERRemove
*[1]1-JUMPER TERMINALRemove / Keep
1-NUTRemove
1-BRACKETRemove / Keep4
*[2]1-BRACKET / STABI-
LIZATION STRAP
Clean5
*[3]1-BRACKETInstall (Kept)6
Head side up with
electrical faying sur-
face bond. Refer to
SWPM 20-20-00 as
an accepted proce-
dure for category 2
fay seal surface
bonds. *[4]
1BACB30NX6K8BOLTInstall (New)7
Install one washer
on each side of the
jumper terminal. *[4]
2NAS1149D0316HWASHERInstall (New)
*[4] *[5]1-JUMPER TERMINALInstall (Kept)
*[4] *[6]1BACN10YT3KNUTInstall (New)
Head side down
with electrical faying
surface bond. Refer
to SWPM 20-20-00
as an accepted pro-
cedure for category
2 fay seal surface
bonds. *[4]
1BACB30NX8K9BOLTInstall (New)8
*[4] *[6]1BACN10YT4KNUTInstall (New)
B787-A-53-00-0025-01A-933B-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 25 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 26

Table 1  
More DataQtyIdentificationNameActionStep
*[7]2JOINT-Measure9
1BACS38K6TIE STRAPInstall (Kept)10
*[1]  Remove the end of the jumper terminal installed in the stackup.
*[2]  Abrasively clean the faying surfaces of the bracket where contact is made with the Stabilization strap and the Jumper Terminal Lug.
Refer to SWPM 20-20-00 as an accepted procedure.
*[3]  Apply BMS 5-45 Sealant to the mating surface of the Bracket and Stabilization Strap to creat a fay seal bond of the joint. Refer to
SWPM 20-20-00 as an accepted procedure.
*[4]  Brush seal with BMS 5-45 sealant before installation. Refer to SWPM 20-20-10 for pre-installed ground studs as an accepted procedure.
*[5]  Before installation, solvent clean the jumper lug and make sure the mating surface is free of sealant. Refer to SWPM 20-20-00 as
an accepted procedure. Install jumper terminal in between the washers with category 2 fay seal electrical faying surface bond. Refer
to SWPM 20-20-10 as an accepted procedure.
*[6]  Fay seal joint with BMS 5-45 sealant. Refer to SWPM 20-20-00 as an accepted procedure for category 2 fay seal surface bonds.
*[7]  Measure resistance of the bond between the bracket and stabilization strap. Refer to SWPM 20-20-00 as an accepted procedure.
Measure the resistance of the bond between the jumper terminal lug and the bracket. Refer to SWPM 20-20-10 as an accepted
procedure. If the resistance is more than 0.0010 ohms for the bond between the terminal and the bracket and/or more than 0.0005
ohms for the bond between the bracket and the stabilization strap, uninstall and reinstall parts in accordance with Steps 2 through 8
of this Task and retest the resistance of bond.
B787-A-53-00-0025-01A-933B-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 26 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 27

Service Bulletin B787-81205-SB530025-00
Task 2 – RIGHT PASSENGER DOOR GROUNDING JUMPER
CONFIGURATION CHANGE [Group 1:]
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN
IMMEDIATELY.
Special Attention:
References
TitleReference
Standard Wiring Practices ManualSWPM 20-20-00
Standard Wiring Practices ManualSWPM 20-20-10
Preliminary Requirements
Required Conditions
Data Module/Technical PublicationAction/Condition
B787-A-53-00-0025-00A-933A-D Issue 002Service Bulletin B787-81205-SB530025-00 -
ACCOMPLISHMENT INSTRUCTIONS
B787-A-53-00-0025-02A-933B-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 27 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 28 (OCR)

A BOEING  B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN
Procedure
This Task applies to Group 1:
000000000
DOOR 1R
2477135
ICN-B787-A-000061-A-81205-11764-A-01-1
Figure 1
Applicable To:  B787-A-53-00-0025-02A-933B-D
Model 787  Issue 002, 02 Jun 2016
See Applicability of this data module
Page 28 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 29 (OCR)

@ BOEING  B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN
STABILIZATION
STRAP
ICN-B787-A-000061-A-81205-11765-A-01-1
Figure 2
Applicable To:  B787-A-53-00-0025-02A-933B-D
Model 787  Issue 002, 02 Jun 2016
See Applicability of this data module
Page 29 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.

### Page 30

1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this task.
Table 1  
More DataQtyIdentificationNameActionStep
1BACS38K6TIE STRAPRemove / Keep1
1-BOLTRemove2
2-WASHERRemove
*[1]1-JUMPER TERMINALRemove / Keep
1-NUTRemove
1-BOLTRemove3
1-NUTRemove
1-BRACKETRemove / Keep4
*[2]1-BRACKET / STABI-
LIZATION STRAP
Clean5
*[3]1-BRACKETInstall (Kept)6
Head side down
with electrical faying
surface bond. Refer
to SWPM 20-20-00
as an accepted pro-
cedure for category
2 fay seal surface
bonds. *[4]
1BACB30NX8K9BOLTInstall (New)7
*[4] *[5]1BACN10YT4KNUTInstall (New)
Head side up with
electrical faying sur-
face bond. Refer to
SWPM 20-20-00 as
an accepted proce-
dure for category 2
fay seal surface
bonds. *[4]
1BACB30NX6K8BOLTInstall (New)8
Install one washer
on each side of the
jumper terminal. *[4]
2NAS1149D0316HWASHERInstall (New)
*[4] *[6]1-JUMPER TERMINALInstall (Kept)
*[4] *[5]1BANC10YT3KNUTInstall (New)
B787-A-53-00-0025-02A-933B-DApplicable To:
Issue 002, 02 Jun 2016Model 787
See Applicability of this data module
Page 30 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

### Page 31

Table 1  
More DataQtyIdentificationNameActionStep
*[7]1JOINT-Measure9
1BACS38K6TIE STRAPInstall (Kept)10
*[1]  Remove the end of the jumper terminal installed in the stackup.
*[2]  Abrasively clean the faying surfaces of the bracket where contact is made with the Stabilization strap and the Jumper Terminal Lug.
Refer to SWPM 20-20-00 as an accepted procedure.
*[3]  Apply BMS 5-45 Sealant to the mating surface of the Bracket and Stabilization Strap to create a fay seal bond of the joint. Refer to
SWPM 20-20-00 as an accepted procedure.
*[4]  Brush seal with BMS 5-45 sealant before installation. Refer to SWPM 20-20-10 for pre-installed ground studs as an accepted procedure.
*[5]  Fay seal joint with BMS 5-45 sealant. Refer to SWPM 20-20-00 as an accepted procedure for category 2 fay seal surface bonds.
*[6]  Before installation, solvent clean the jumper lug and make sure the mating surface is free of sealant. Refer to SWPM 20-20-00 as
an accepted procedure. Install jumper terminal in between the washers with category 2 fay seal electrical faying surface bond. Refer
to SWPM 20-20-10 as an accepted procedure.
*[7]  Measure resistance of the bond between the bracket and stabilization strap. Refer to SWPM 20-20-00 as an accepted procedure.
Measure the resistance of the bond between the jumper terminal lug and the bracket. Refer to SWPM 20-20-10 as an accepted
procedure. If the resistance is more than 0.0010 ohms for the bond between the terminal and the bracket and/or more than 0.0005
ohms for the bond between the bracket and the stabilization strap, uninstall and reinstall parts in accordance with Steps 2 through 8
of this Task and retest the resistance of bond.
B787-A-53-00-0025-02A-933B-DApplicable To:
Issue 002, 02 Jun 2016End of data moduleModel 787
See Applicability of this data module
Page 31 of 31
EXPORT CONTROLLED ECCN: 9E991
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET. See title page for details.
B787-81205-SB530025-00
Issue 002, 02 Jun 2016
AIRCRAFT SERVICE BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
