# Boeing Alert Requirements Bulletin B787-81205-SB530070-00 RB

Copy: Revision 001 ("787-53A0070-01--RB"), 17 pages: PDF https://openairdocs.org/files/sha256/ba/7e/ba7e8c20c9a48726531963dbb5b41cc12e62412b18166b0c312020c3ac432e24; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530070-00-rb/file/ba7e8c20c9a4.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0671; AD 2019-22-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530070-00 RB
- Latest revision known: B787-81205-SB530070-00 RB, Issue 001, dated August 31, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530070-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-22-09](https://openairdocs.org/ad/2019-22-09.md), effective Jan 13, 2020: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530070-00-rb/proposed.md).

## Text (17 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0671; AD 2019-22-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Requirements Bulletin B787-81205-SB530070-00 RB FUSELAGE -
Section 44 - Left and Right Side Main Landing Gear Aft Hanger Link Lug
Fitting Inspection
Copyright © 2018 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 1 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
3.0
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TASK 1 – LEFT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - INSPECTION [Group 1]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TASK 2 – RIGHT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - INSPECTION [Group 1]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 2 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8 Airplanes, line numbers 6-70.
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB530070-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB530070-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required action(s), based on the applicable condition(s) in Tables 4 and 5, in accordance
with Requirement Bulletin B787-81205-SB530070-00 RB Accomplishment Instructions.
Table 4  WORK PACKAGE 1 - LEFT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - IN-
SPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before 22,000 total
flight cycles.
Do a surface HFEC inspec-
tion of the aft hanger link
lug fitting at the lug root ra-
dius for any crack.
All Airplanes
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 3 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 4

Table 4  WORK PACKAGE 1 - LEFT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - IN-
SPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before further
flight.
ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 1: ANY
CRACK FOUND
12,000 flight cycles-ACTION 2: Repeat the
surface HFEC inspection
of the aft hanger link lug
fitting at the lug root radius
for any crack on unrepaired
locations.
12,000 flight cycles-Repeat the surface HFEC
inspection of the aft hanger
link lug fitting at the lug root
radius for any crack.
CONDITION 2: NO
CRACK FOUND
Table 5  WORK PACKAGE 2 - RIGHT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - 
INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before 22,000 total
flight cycles.
Do a surface HFEC inspec-
tion of the aft hanger link
lug fitting at the lug root ra-
dius for any crack.
All Airplanes
-Before further
flight.
ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND
12,000 flight cycles-ACTION 2: Repeat the
surface HFEC inspection
of the aft hanger link lug
fitting at the lug root radius
for any crack on unrepaired
locations.
12,000 flight cycles-Repeat the surface HFEC
inspection of the aft hanger
link lug fitting at the lug root
radius for any crack.
CONDITION 4: NO
CRACK FOUND
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 4 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 5

D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 5 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 6

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 5. The work instructions are divided into work packages. Each work package can be com-
pleted independently during separate maintenance visits.
6. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
7. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
8. Boeing Service Letter 787 SL 51-001 Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for additional
structural repair instructions. The Service Letter describes what information must be
provided to Boeing before a structural repair can be provided.
9. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
11. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 6 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 7

12. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any figures identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified figures, can still be done as specified, and the airplane can be put back in an
airworthy condition. Figures not required for compliance are omitted from the RB.
13. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Table 1  WORK PACKAGE 1 - LEFT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - INSPECTION
Refer to the listed proce-
dures in SB 787-53A0070
Issue 001 or later ap-
proved issues as an ac-
cepted procedure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS
LEFT SIDE
-Do a surface HFEC inspec-
tion of the aft hanger link
lug fitting at the lug root
radius for any crack.
All Airplanes
-Task 1
PART 2: CLOSE ACCESS
LEFT SIDE
-
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 7 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 8

Table 1  WORK PACKAGE 1 - LEFT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - INSPECTION
Refer to the listed proce-
dures in SB 787-53A0070
Issue 001 or later ap-
proved issues as an ac-
cepted procedure.
Method of ComplianceActionCondition
--ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 1: ANY
CRACK FOUND.
PART 1: OPEN ACCESS
LEFT SIDE
-ACTION 2: Repeat the
surface HFEC inspection
of the aft hanger link lug
fitting at the lug root radius
for any crack on unre-
paired locations.
-Task 1
PART 2: CLOSE ACCESS
LEFT SIDE
-
PART 1: OPEN ACCESS
LEFT SIDE
-Repeat the surface HFEC
inspection of the aft hanger
link lug fitting at the lug
root radius for any crack.
CONDITION 2: NO
CRACK FOUND.
-Task 1
PART 2: CLOSE ACCESS
LEFT SIDE
-
Table 2  WORK PACKAGE 2 - RIGHT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - INSPEC-
TION
Refer to the listed proce-
dures in SB 787-53A0070
Issue 001 or later ap-
proved issues as an ac-
cepted procedure.
Method of ComplianceActionCondition
PART 3: OPEN ACCESS
RIGHT SIDE
-Do a surface HFEC inspec-
tion of the aft hanger link
lug fitting at the lug root
radius for any crack.
All Airplanes
-Task 2
PART 4: CLOSE ACCESS
RIGHT SIDE
-
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 8 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 9

Table 2  WORK PACKAGE 2 - RIGHT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING - INSPEC-
TION
Refer to the listed proce-
dures in SB 787-53A0070
Issue 001 or later ap-
proved issues as an ac-
cepted procedure.
Method of ComplianceActionCondition
--ACTION 1: Contact The
Boeing Company for repair
instructions and do the re-
pair.
CONDITION 3: ANY
CRACK FOUND.
PART 3: OPEN ACCESS
RIGHT SIDE
-ACTION 2: Repeat the
surface HFEC inspection
of the aft hanger link lug
fitting at the lug root radius
for any crack on unre-
paired locations.
-Task 2
PART 4: CLOSE ACCESS
RIGHT SIDE
-
PART 3: OPEN ACCESS
RIGHT SIDE
-Repeat the surface HFEC
inspection of the aft hanger
link lug fitting at the lug
root radius for any crack.
CONDITION 4: NO
CRACK FOUND.
-Task 2
PART 4: CLOSE ACCESS
RIGHT SIDE
-
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 9 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 10

Task 1 – LEFT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG FITTING
- INSPECTION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 10 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 11 (OCR)

Q BOEING  B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
1000 0000 Д
• 0•0000 0000 D
AFT HANGER LINK LUG FITTING
ICN-B787-A-000061-A-81205-15219-A-01-1
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 11 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 12 (OCR)

A BOEING  B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN
INSPECTION AREA  2818656
ICN-B787-A-000061-A-81205-15220-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this airplane.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 12 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 13

Table 1  
More DataQtyIdentificationNameActionStep
*[1]-404Z3371-3 OR
404Z3371-1
Aft Hanger Link Lug
Fitting
Inspect1
*[1]  Do a surface HFEC inspection for any crack on the lug root fillet radius in accordance with 787 NDT Manual Part 6, 57-10-02.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 13 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 14

Task 2 – RIGHT SIDE MAIN LANDING GEAR AFT HANGER LINK LUG
FITTING - INSPECTION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 14 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

### Page 15 (OCR)

@ BOEING  B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
LOSS 00000 •
AFT HANGER LINK LUG FITTING
ICN-B787-A-000061-A-81205-15221-A-01-1
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 15 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 16 (OCR)

A BOEING  B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN
INSPECTION AREA  2818671
ICN-B787-A-000061-A-81205-15222-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this airplane.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 16 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 17

Table 1  
More DataQtyIdentificationNameActionStep
*[1]-404Z3371-3 OR
404Z3371-1
Aft Hanger Link Lug
Fitting
Inspect1
*[1]  Do a surface HFEC inspection for any crack on the lug root fillet radius in accordance with 787 NDT Manual Part 6, 57-10-02.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
Page 17 of 17
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530070-00 RB
Issue 001, 31 Aug 2018
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
