# Boeing Alert Requirements Bulletin B787-81205-SB530077-00 RB

Copy: Revision 001 ("SB-787-53A0077-00_RB"), 24 pages: PDF https://openairdocs.org/files/sha256/25/ff/25ff61c383e4a31c6c528b30e6fc9080336401392024a12cc078e9a23fb6f73b; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530077-00-rb/file/25ff61c383e4.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0338; AD 2021-23-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530077-00 RB
- Latest revision known: B787-81205-SB530077-00 RB, Issue 001, dated September 8, 2020 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530077-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-23-21](https://openairdocs.org/ad/2021-23-21.md), effective Jan 10, 2022: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530077-00-rb/proposed.md).

## Text (24 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0338; AD 2021-23-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Requirements Bulletin B787-81205-SB530077-00 RB FUSELAGE -
Section 45 Bulkhead - STA 1209 Aft Wheel Well Bulkhead Side Fitting
Inspection
Copyright © 2020 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 1 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
5.0
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQ UIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. General Inf ormation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Work Instr uctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TASK 1 – LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE FITTING AND FAILSAFE STRAP
- HFEC INSPECTION  [Group 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TASK 2 – LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE FITTING - HFEC INSPECTION
[Group 2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 2 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9 Airplane(s), line number(s) 115-527, 529-547, 549-564,
566-598, 601, 603, 605, 607, 610, 612, 614, 619 in 2 Group(s).Where the effectivity is presented
with hyphens between line numbers, the airplane applicability means "through" and "inclusive",
e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes with potential shimming requirements not met at STA
1209 Aft Wheel Well Bulkhead Side Fitting structure joints.
-1
787-9 Airplanes with potential shimming requirements not met at STA
1209 Aft Wheel Well Bulkhead Side Fitting structure joints.
-2
Airplane Models: 787-8, 787-9
Table 2
GroupVariable Number
1ZA122 - ZA124
1ZA136 - ZA144
1ZA152 - ZA156
1ZA187 - ZA189
1ZA195 - ZA204
1ZA215 - ZA225
1ZA244 - ZA255
1ZA265 - ZA269
1ZA275 - ZA277
1ZA291 - ZA296
GroupVariable Number
1ZA321 - ZA324
1ZA327
1ZA334 - ZA335
1ZA341 - ZA342
1ZA387 - ZA389
1ZA435 - ZA439
1ZA445 - ZA448
1ZA453 - ZA457
1ZA468 - ZA489
1ZA515 - ZA516
GroupVariable Number
1ZA540 - ZA545
1ZA560 - ZA567
1ZA578 - ZA580
1ZA586
1ZA588 - ZA593
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655 - ZA663
1ZA665 - ZA675
1ZA680 - ZA685
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 3 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZA695 - ZA697
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA831
1ZA839
1ZA842
1ZA846 - ZA848
1ZA853 - ZA860
1ZA873 - ZA874
1ZA881 - ZA888
1ZA916 - ZA920
2ZB001 - ZB010
2ZB021 - ZB040
2ZB047 - ZB057
GroupVariable Number
2ZB077 - ZB081
2ZB097 - ZB107
2ZB127 - ZB132
2ZB167 - ZB187
2ZB197 - ZB198
2ZB217
2ZB224 - ZB229
2ZB234 - ZB242
2ZB246
2ZB251 - ZB253
2ZB261
2ZB299
2ZB302
2ZB332
2ZB362 - ZB377
2ZB407 - ZB418
2ZB422 - ZB424
2ZB446 - ZB457
GroupVariable Number
2ZB536 - ZB543
2ZB545 - ZB547
2ZB558 - ZB578
2ZB603 - ZB618
2ZB646 - ZB649
2ZB656 - ZB659
2ZB676 - ZB679
2ZB688 - ZB699
2ZB703 - ZB705
2ZB733
2ZB738 - ZB739
2ZB763 - ZB766
2ZB778 - ZB779
2ZB782 - ZB791
2ZB812 - ZB815
2ZB828
2ZB831
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB530077-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB530077-00 RB mandatory.
Accomplish the required actions, based on the applicable conditions in Table 5 and 6, in accordance with
Accomplishment Instructions.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 4 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 5

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1:
Table 5  AFT WHEEL WELL BULKHEAD SIDE FITTING AND FAILSAFE STRAP - HIGH FREQUENCY EDDY 
CURRENT (HFEC) INSPECTION
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Before 19,900 Total Flight Cycles ORDo HFEC inspection
of the forward edge
of the Side Fitting
and Failsafe Strap
from WL 146 to WL
165, at STA 1209,
left and right side,
and the Side Fitting
outer chord surface
and Failsafe Strap
from WL 165 up to
the lower edge of the
Wheel Well
Longeron Extension
(WWLE), left and
right side, for any
crack.
All Airplanes.
Before 101,250 Total Flight Hours,
whichever occurs first.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 5 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 6

Group 1:
Table 5  AFT WHEEL WELL BULKHEAD SIDE FITTING AND FAILSAFE STRAP - HIGH FREQUENCY EDDY 
CURRENT (HFEC) INSPECTION
Repeat Interval (Not
to Exceed)
Compliance TimeActionCondition
-Before further flightACTION 1:CONDITION 1: ANY
CRACK FOUND. Contact The Boeing
Company for repair
instructions and do
the repair.
12,000 Flight Cycles-ACTION 2:
Repeat the HFEC in-
spection of the for-
ward edge of the
Side Fitting and Fail-
safe Strap from WL
146 to WL 165, at
STA 1209, left and
right side, and the
Side Fitting outer
chord surface and
Failsafe Strap from
WL 165 up to the
lower edge of the
WWLE, left and right
side, for any crack.
*[1]
12,000 Flight Cycles-Repeat the HFEC in-
spection of the for-
ward edge of the
Side Fitting and Fail-
safe Strap from WL
146 to WL 165, at
STA 1209, left and
right side, and the
side Fitting outer
chord surface and
Failsafe Strap from
WL 165 up to the
lower edge of the
WWLE, left and right
side, for any crack.
*[1]
CONDITION 2: NO
CRACK FOUND.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 6 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 7

Group 1:
Table 5  AFT WHEEL WELL BULKHEAD SIDE FITTING AND FAILSAFE STRAP - HIGH FREQUENCY EDDY 
CURRENT (HFEC) INSPECTION
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530077-00 RB in areas where a repair
covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530077-00 RB and installed
after the Issue 001 date of the Requirements Bulletin B787-81205-SB530077-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a
repeat inspection program for the subject area.
Group 2:
Table 6  LEFT AND RIGHT AFT WHEEL WELL BULKHEAD SIDE FITTING - HIGH FREQUENCY EDDY CURRENT
 (HFEC) INSPECTION
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
later)
ActionCondition
-Within 1,500 Flight
Cycles OR
Before 13,000 Total
Flight Cycles OR
Do HFEC inspection
of the forward edge
of the Side Fitting
from WL 152 to WL
167, at STA 1209,
left and right side,
and Side Fitting outer
chord surface from
WL 167 up to the
lower edge of the
Wheel Well
Longeron Extension
(WWLE), left and
right side, for any
crack.
All Airplanes.
Within 365 days after
the Issue 001 date of
the Requirements
Bulletin B787-81205-
SB530077-00 RB,
whichever occurs
first.
Before 101,250 Total
Flight Hours,
whichever occurs
first.
-Before further flightACTION 1:CONDITION 3: ANY
CRACK FOUND. Contact The Boeing
Company for repair
instructions and do
the repair.
12,000 Flight Cycles-ACTION 2:
Repeat the HFEC in-
spection of the for-
ward edge of the
Side Fitting from WL
152 to WL 167, at
STA 1209, left and
right side, and Side
Fitting outer chord
surface from WL 167
up to the lower edge
of the WWLE, left
and right side, for
any crack. *[1]
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 7 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 8

Group 2:
Table 6  LEFT AND RIGHT AFT WHEEL WELL BULKHEAD SIDE FITTING - HIGH FREQUENCY EDDY CURRENT
 (HFEC) INSPECTION
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
later)
ActionCondition
12,000 Flight Cycles-Repeat the HFEC in-
spection of the for-
ward edge of the
Side Fitting from WL
152 to WL 167, at
STA 1209, left and
right side, and Side
Fitting outer chord
surface from WL 167
up to the lower edge
of the WWLE, left
and right side, for
any crack. *[1]
CONDITION 4: NO
CRACK FOUND.
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530077-00 RB in areas where a repair
covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530077-00 RB and installed
after the Issue 001 date of the Requirements Bulletin B787-81205-SB530077-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a
repeat inspection program for the subject area.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 8 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 9

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document.There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any tasks identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including sub steps and identified tasks. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified tasks, can still be done as specified, and the airplane can be put back in an
airworthy condition. Tasks not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in the Work Instructions are in the Compliance
section.
5. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
6. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION, do
all of the ACTION numbers for that CONDITION or OPTION.
7. The instructions in the Work Instructions and the Tasks can include operation of tools or
test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment
Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions
of the tools or test equipment that you can use. It is permitted to use replaced tools. It is
not permitted to use superseded tools.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 9 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 10

8. Boeing Service Letter 787-SL-51-001, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for additional
structural repair instructions. The Service Letter describes what information must be
provided to Boeing before a structural repair can be provided.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Group 1:
Table 1  LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE FITTING AND FAILSAFE STRAP - 
HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB530077-00 Issue
001 or later approved
issues as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN AC-
CESS
--All Airplanes.
-Task 1Do HFEC inspection of the for-
ward edge of the Side Fitting
and Failsafe Strap from WL 146
to WL 165, at STA 1209, left
and right side, and the Side Fit-
ting outer chord surface and
Failsafe Strap from WL 165 up
to the lower edge of the Wheel
Well Longeron Extension
(WWLE), left and right side, for
any crack.
PART 2: CLOSE AC-
CESS
-ACTION 1:
Contact The Boeing Company
for repair instructions and do the
repair.
CONDITION 1: ANY
CRACK FOUND.
PART 1: OPEN AC-
CESS
-ACTION 2:
Repeat the HFEC inspection of
the forward edge of the Side
Fitting from WL 146 to WL 165,
at STA 1209, left and right side,
and Side Fitting outer chord
surface from WL 165 up to the
lower edge of the WWLE, left
and right side, for any crack. *[1]
-Task 1
PART 2: CLOSE AC-
CESS
-
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 10 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 11

Group 1:
Table 1  LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE FITTING AND FAILSAFE STRAP - 
HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB530077-00 Issue
001 or later approved
issues as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN AC-
CESS
-Repeat the HFEC inspection of
the forward edge of the Side
Fitting from WL 146 to WL 165,
at STA 1209, left and right side,
and Side Fitting outer chord
surface from WL 165 up to the
lower edge of the WWLE, left
and right side, for any crack. *[1]
CONDITION 2: NO
CRACK FOUND.
-Task 1
PART 2: CLOSE AC-
CESS
-
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530077-00 RB in areas where
a repair covers the affected inspection area and meets the following conditions:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530077-00 RB and
installed after the Issue 001 date of the Requirements Bulletin B787-81205-SB530077-00 RB.
2.The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains
a repeat inspection program for the subject area.
Group 2:
Table 2  LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE FITTING - HIGH FREQUENCY EDDY
 CURRENT (HFEC) INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB530077-00 Issue
001 or later approved
issues as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN AC-
CESS
--All Airplanes.
-Task 2Do HFEC inspection of the for-
ward edge of the Side Fitting
from WL 152 to WL 167, at STA
1209, left and right side, and
Side Fitting outer chord surface
from WL 167 up to the lower
edge of the Wheel Well
Longeron Extension (WWLE),
left and right side, for any crack.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 11 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 12

Group 2:
Table 2  LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE FITTING - HIGH FREQUENCY EDDY
 CURRENT (HFEC) INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB530077-00 Issue
001 or later approved
issues as an accepted
procedure
Method of Compli-
ance
ActionCondition
--ACTION 1:CONDITION 3: ANY
CRACK FOUND. Contact The Boeing Company
for repair instructions and do the
repair.
PART 1: OPEN AC-
CESS
-ACTION 2:
Repeat the HFEC inspection of
the forward edge of the Side
Fitting from WL 152 to WL 167,
at STA 1209, left and right side,
and Side Fitting outer chord
surface from WL 167 up to the
lower edge of the WWLE, left
and right side, for any crack. *[1]
-Task 2
PART 2: CLOSE AC-
CESS
-
PART 1: OPEN AC-
CESS
-Repeat the HFEC inspection of
the forward edge of the Side
Fitting from WL 152 to WL 167,
at STA 1209, left and right side,
and Side Fitting outer chord
surface from WL 167 up to the
lower edge of the WWLE, left
and right side, for any crack. *[1]
CONDITION 4: NO
CRACK FOUND.
-Task 2
PART 2: CLOSE AC-
CESS
-
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530077-00 RB in areas where
a repair covers the affected inspection area and meets the following conditions:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530077-00 RB and
installed after the Issue 001 date of the Requirements Bulletin B787-81205-SB530077-00 RB.
2.The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains
a repeat inspection program for the subject area.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 12 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 13

Task 1 – LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE
FITTING AND FAILSAFE STRAP - HFEC INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 13 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 14 (OCR)

_BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
AFT WHEEL WELL
BULKHEAD STA 1209
• SIDE
FITTING
FWD
INB D
LEFT MAIN LANDING GEAR WHEEL WELL
ICN-B787-A-000061-A-81205-17738-A-01-1
Figure 1
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 14 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 15 (OCR)

O BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
WHEEL WELL
LONGERON
EXTENSION
STA
1209  SIDE FITTING
(UPPER)
- SKIN
FAILSAFE
STRAP
•OUTER
STRAP
VIEW LOOKING UP
A-A
SIDE FITTING
(LOWER)
SKIN
FAILSAFE_
STRAP
W
D
LEFT SIDE MAIN LANDING GEAR WHEEL WELL
ZONE  INSPECTION  VIEW LOOKING UP  B-B  2916480
ICN-B787-A-000061-A-81205-17739-A-01-1
Figure 2
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 15 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 16 (OCR)

Q BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
AFT WHEEL WELL
BULKHEAD STA 1209
D
SIDE
FITTING
FWD
IB D
RIGHT MAIN LANDING GEAR WHEEL WELL
ICN-B787-A-000061-A-81205-17740-A-01-1
Figure 3
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 16 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 17 (OCR)

A BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
SIDE FITTING
WHEEL WELL  (UPPER)
LONGERON
EXTENSION
STA
1209
SKIN
- FAILSAFE
STRAP
OUTER
STRAP
W
VIEW LOOKING UP
C-C
SIDE FITTING
(LOWER)
WL
146
SKIN
FAILSAFE
STRAP
RIGHT SIDE MAIN LANDING GEAR WHEEL WELL
VIEW LOOKING UP
D-D
INSPECTION  2916607
ZONE
ICN-B787-A-000061-A-81205-17741-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for each task.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 17 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 18

Table 1  
More DataQtyIdenti-
fica-
tion
NameActionStep
*[1]1-LOWER SIDE FIT-
TING, FAILSAFE
STRAP
Inspect1
*[2]1-UPPER SIDE FIT-
TING, FAILSAFE
STRAP
Inspect2
*[1]1-LOWER SIDE FIT-
TING, FAILSAFE
STRAP
Inspect3
*[2]1-UPPER SIDE FIT-
TING, FAILSAFE
STRAP
Inspect4
*[1]  Do surface HFEC inspection of the forward edge of the Side Fitting and Failsafe Strap from WL 146 to WL 165, at STA 1209, for any
crack in accordance with 787 NDT Manual Part 6, 53-20-02 Temporary Revision (TR) 06-1018 dated Feb 25/2020, or 787 NDT
Manual Part 6, 53-20-02 that incorporates 787 NDT Manual Part 6, 53-20-02 TR 06-1018 dated Feb 25/2020 or later Boeing approved
revisions.
*[2]  Do a surface HFEC inspection of the Side Fitting outer chord surface and Failsafe Strap from WL 165 up to the lower edge of the
Wheel Well Longeron Extension, for any crack in accordance with 787 NDT Manual Part 6, 53-20-02 Temporary Revision (TR) 06-
1018 dated Feb 25/2020, or 787 NDT Manual Part 6, 53-20-02 that incorporates 787 NDT Manual Part 6, 53-20-02 TR 06-1018
dated Feb 25/2020 or later Boeing approved revisions.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 18 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 19

Task 2 – LEFT AND RIGHT SIDE AFT WHEEL WELL BULKHEAD SIDE
FITTING - HFEC INSPECTION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 19 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 20 (OCR)

_BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
AFT WHEEL WELL
BULKHEAD STA 1209
• SIDE
FITTING
FWD
LEFT MAIN LANDING GEAR WHEEL WELL
2916609
ICN-B787-A-000061-A-81205-17742-A-01-1
Figure 1
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 20 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 21 (OCR)

Ø BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
WHEEL WELL
LONGERON  STA
EXTENSION  1209  SIDE FITTING
(UPPER)
- SKIN
WL
: 175
VIEW LOOKING UP
A-A
WI
167
_B—  SIDE FITTING
(LOWER)
152
— SKIN
LEFT MAIN LANDING GEAR WHEEL WELL  VIEW LOOKING UP
B  B-B
INSPECTION  2916610
1 ZONE
ICN-B787-A-000061-A-81205-17743-A-01-1
Figure 2
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 21 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 22

ICN-B787-A-000061-A-81205-17744-A-01-1
Figure 3
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 22 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

### Page 23 (OCR)

A BOEING  B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN
WHEEL WELL
LONGERON
STA
EXTENSION
1209
SIDE FITTING
(UPPER)
SKIN
VIEW LOOKING UP
C-C
SIDE FITTING
(LOWER)
SKIN -
VIEW LOOKING UP
RIGHT MAIN LANDING GEAR WHEEL WELL  D-D
DI
INSPECTION  2916629
ZONE
ICN-B787-A-000061-A-81205-17745-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for each task.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 23 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 24

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1-LOWER SIDE FIT-
TING
Inspect1
*[2]1-UPPER SIDE FIT-
TING
Inspect2
*[1]1-LOWER SIDE FIT-
TING
Inspect3
*[2]1-UPPER SIDE FIT-
TING
Inspect4
*[1]  Do a surface HFEC inspection of the forward edge of the Side Fitting from WL 152 to WL 167, at STA 1209, for any crack in accordance
with 787 NDT Manual Part 6, 53-20-01 Temporary Revision (TR) 06-1007 dated Feb 13/2020, or 787 NDT Manual Part 6, 53-20-01
that incorporates 787 NDT Manual Part 6, 53-20-01 TR 06-1007 dated Feb 13/2020 or later Boeing approved revisions.
*[2]  Do a surface HFEC inspection of the Side Fitting outer chord surface from WL 167 up to the lower edge of the Wheel Well Longeron
Extension, for any crack in accordance with 787 NDT Manual Part 6, 53-20-01 TR 06-1007 dated Feb 13/2020, or 787 NDT Manual
Part 6, 53-20-01 that incorporates 787 NDT Manual Part 6, 53-20-01 TR 06-1007 dated Feb 13/2020 or later Boeing approved revisions.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
Page 24 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530077-00 RB
Issue 001, 08 Sep 2020 9:04:30 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
