# Boeing Alert Requirements Bulletin B787-81205-SB530078-00 RB

Copy: Revision 001 ("SB-787-53A0078-00_RB"), 29 pages: PDF https://openairdocs.org/files/sha256/59/9b/599b3ea6666c572283ce8b70331dab68c16c1d690c0fed4263af7b192fcd1303; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530078-00-rb/file/599b3ea6666c.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0338; AD 2021-23-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530078-00 RB
- Latest revision known: B787-81205-SB530078-00 RB, Issue 001, dated September 8, 2020 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530078-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-23-21](https://openairdocs.org/ad/2021-23-21.md), effective Jan 10, 2022: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530078-00-rb/proposed.md).

## Text (29 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2021-0338; AD 2021-23-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Requirements Bulletin B787-81205-SB530078-00 RB FUSELAGE -
Body Station (STA) 1209 Aft Wheel Well Bulkhead - Body Chord Inspection
Copyright © 2020 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 1 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
3.0
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQ UIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. General Inf ormation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Work Instr uctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TASK 1 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC INSPECTION  [Group 1] . . 16
TASK 2 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC INSPECTION  [Group 2] . . 21
TASK 3 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC INSPECTION  [Group 2] . . 26
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 2 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9 Airplane(s), line number(s) 115-527, 529-547, 549-564,
566-598, 601, 603, 605, 607, 610, 612, 614, 619 in 2 Group(s).Where the effectivity is presented
with hyphens between line numbers, the airplane applicability means "through" and "inclusive",
e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 airplanes with potential shimming requirements not met at the
STA 1209 aft wheel well bulkhead body chord.
-1
787-9 airplanes with potential shimming requirements not met at the
STA 1209 aft wheel well bulkhead body chord.
-2
Airplane Models: 787-8, 787-9
Table 2
GroupVariable Number
1ZA122 - ZA124
1ZA136 - ZA144
1ZA152 - ZA156
1ZA187 - ZA189
1ZA195 - ZA204
1ZA215 - ZA225
1ZA244 - ZA255
1ZA265 - ZA269
1ZA275 - ZA277
1ZA291 - ZA296
GroupVariable Number
1ZA321 - ZA324
1ZA327
1ZA334 - ZA335
1ZA341 - ZA342
1ZA387 - ZA389
1ZA435 - ZA439
1ZA445 - ZA448
1ZA453 - ZA457
1ZA468 - ZA489
1ZA515 - ZA516
GroupVariable Number
1ZA540 - ZA545
1ZA560 - ZA567
1ZA578 - ZA580
1ZA586
1ZA588 - ZA593
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655 - ZA663
1ZA665 - ZA675
1ZA680 - ZA685
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 3 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZA695 - ZA697
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA831
1ZA839
1ZA842
1ZA846 - ZA848
1ZA853 - ZA860
1ZA873 - ZA874
1ZA881 - ZA888
1ZA916 - ZA920
2ZB001 - ZB010
2ZB021 - ZB040
2ZB047 - ZB057
GroupVariable Number
2ZB077 - ZB081
2ZB097 - ZB107
2ZB127 - ZB132
2ZB167 - ZB187
2ZB197 - ZB198
2ZB217
2ZB224 - ZB229
2ZB234 - ZB242
2ZB246
2ZB251 - ZB253
2ZB261
2ZB299
2ZB302
2ZB332
2ZB362 - ZB377
2ZB407 - ZB418
2ZB422 - ZB424
2ZB446 - ZB457
GroupVariable Number
2ZB536 - ZB543
2ZB545 - ZB547
2ZB558 - ZB578
2ZB603 - ZB618
2ZB646 - ZB649
2ZB656 - ZB659
2ZB676 - ZB679
2ZB688 - ZB699
2ZB703 - ZB705
2ZB733
2ZB738 - ZB739
2ZB763 - ZB766
2ZB778 - ZB779
2ZB782 - ZB791
2ZB812 - ZB815
2ZB828
2ZB831
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB530078-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB530078-00 RB mandatory.
Accomplish the required actions, based on the applicable conditions in Table 5 and 6, in accordance with
Accomplishment Instructions.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 4 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 5

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Group 1:
Table 5  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Within 1,500 Flight
Cycles OR within
365 days after the Is-
sue 001 date of the
Requirements Bul-
letin B787-81205-
SB530078-00 RB,
whichever occurs
first.
Before 7,900 Total
Flight cycles
OR
Before 101,250 Total
Flight hours,
whichever occurs
first.
Do a HFEC inspec-
tion of the forward
edge of the horizon-
tal flange of the Aft
Wheel Well Bulkhead
(AWWB) body chord
between left Water
Line (WL) 146 and
right WL 146 for any
crack.
All Airplanes.
-Before further flight.ACTION 1:CONDITION 1: ANY
CRACK FOUND. Contact The Boeing
Company for repair
instructions and do
the repair.
12,000 flight cycles.-ACTION 2:
Repeat the HFEC in-
spection of the for-
ward edge of the
horizontal flange of
the AWWB body
chord between left
WL 146 and right WL
146 for any crack. *[1]
12,000 flight cycles.-Repeat the HFEC in-
spection of the for-
ward edge of the
horizontal flange of
the AWWB body
chord between left
WL 146 and right WL
146 for any crack. *[1]
CONDITION 2: NO
CRACK FOUND.
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair
covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed
after the Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a
repeat inspection program for the subject area.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 5 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 6

Group 2:
Table 6  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Repeat Inter-
val (Not to
Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Within 1,500 Flight
Cycles OR within
365 days after the Is-
sue 001 date of the
Requirements Bul-
letin B787-81205-
SB530078-00 RB,
whichever occurs
first.
Before 7,500 Total
Flight cycles
OR
Before 101,250 Total
Flight hours,
whichever occurs
first.
Action 1:
Do a HFEC inspection of
the forward edge of the
horizontal flange of the Aft
Wheel Well Bulkhead
(AWWB) body chord be-
tween Water Line (WL) 132
and WL 152, left and right
side, and between left But-
tock Line (BL) 41 and right
BL 41, for any crack.
All Airplanes
Action 2:
Do a HFEC inspection
around all the fastener
heads and vertical beam
clips common to the AWWB
body chord horizontal
flange from two fasteners
above stringer S-31 to two
fasteners below stringer S-
35, left and right side, for
any crack.
-Before further flight.Action 1:CONDITION 3: ANY
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD FORWARD
EDGES.
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
12,000 flight
cycles.
-Action 2:
Repeat the HFEC inspec-
tion of the forward edge of
the horizontal flange of the
AWWB body chord between
WL 132 and WL 152, left
and right side, and between
left BL 41 and right BL 41,
for any crack. *[1]
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 6 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 7

Group 2:
Table 6  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Repeat Inter-
val (Not to
Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
12,000 flight
cycles.
-Repeat the HFEC inspec-
tion of the forward edge of
the horizontal flange of the
AWWB body chord between
WL 132 and WL 152, left
and right side, and between
left BL 41 and right BL 41,
for any crack. *[1]
CONDITION 4: NO
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD FORWARD
EDGES.
-Before further flight.Action 1:CONDITION 5: ANY
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD HORIZON-
TAL FLANGE.
Contact The Boeing Compa-
ny for repair instructions
and do the repair.
12,000 flight
cycles.
-Action 2:
Repeat the HFEC inspec-
tion around all the fastener
heads and vertical beam
clips common to the AWWB
body chord horizontal
flange from two fasteners
above stringer S-31 to two
fasteners below stringer S-
35, left and right side, for
any crack. *[1]
12,000 flight
cycles.
-Repeat the HFEC inspec-
tion around all the fastener
heads and vertical beam
clips common to the AWWB
body chord horizontal
flange from two fasteners
above stringer S-31 to two
fasteners below stringer S-
35, left and right side, for
any crack. *[1]
CONDITION 6: NO
CRACK FOUND
DURING INSPEC-
TION OF THE
AWWB BODY
CHORD HORIZON-
TAL FLANGE.
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair
covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed
after the Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a
repeat inspection program for the subject area.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 7 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 8

Group 1-2:
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulation and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authority (JAA) approved for all EASA/JAA approved airplanes
listed in the Requirements Bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this FAA Requirement Document.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 8 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 9

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document.There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any figures identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified figures, can still be done as specified, and the airplane can be put back in an
airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in the Work Instructions are in the Compliance
section.
5. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers.When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
6. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
7. The instructions in the Work Instructions can include operation of tools or test equipment.
Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the
Special Tool and Ground Handling Drawing Index contain data on versions of the tools
or test equipment that you can use. It is permitted to use replaced tools. It is not permitted
to use superseded tools.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 9 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 10

8. Boeing Service Letter 787-SL-51-001, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for additional
structural repair instructions. The Service Letter describes what information must be
provided to Boeing before a structural repair can be provided.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Group 1:
Table 1  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB530078-00 Issue 001
or later approved issues
as an accepted proce-
dure:
Method of ComplianceActionCondition
PART 1: OPEN ACCESS--All Airplanes.
-Task 1Do a HFEC inspection of
the forward edge of the
horizontal flange of the Aft
Wheel Well Bulkhead
(AWWB) body chord be-
tween left Water Line (WL)
146 and right WL 146 for
any crack.
PART 2: CLOSE ACCESS-ACTION 1:CONDITION 1: ANY
CRACK FOUND. Contact The Boeing Com-
pany for repair instructions
and do the repair.
PART 1: OPEN ACCESS-ACTION 2:
Repeat the HFEC inspec-
tion of the forward edge of
the horizontal flange of the
AWWB body chord be-
tween left WL 146 and
right WL 146 for any crack.
*[1]
-Task 1
PART 2: CLOSE ACCESS-
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 10 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 11

Group 1:
Table 1  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB530078-00 Issue 001
or later approved issues
as an accepted proce-
dure:
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Repeat the HFEC inspec-
tion of the forward edge of
the horizontal flange of the
AWWB body chord be-
tween left WL 146 and
right WL 146 for any crack.
*[1]
CONDITION 2: NO
CRACK FOUND. -Task 1
PART 2: CLOSE ACCESS-
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair
covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed
after the Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a
repeat inspection program for the subject area.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 11 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 12

Group 2:
Table 2  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB530078-00 Issue 001
or later approved issues
as an accepted proce-
dure:
Method of ComplianceActionCondition
PART 1: OPEN ACCESS--All Airplanes.
-Task 2ACTION 1:
Do a HFEC inspection of
the forward edge of the
horizontal flange of the Aft
Wheel Well Bulkhead
(AWWB) body chord be-
tween Water Line (WL)
132 and WL 152, left and
right side, and between left
Buttock Line (BL) 41 and
right BL 41, for any crack.
PART 3: OPEN ACCESS--
-Task 3ACTION 2:
Do a HFEC inspection
around all the fastener
heads and vertical beam
clips common to the
AWWB body chord horizon-
tal flange from two fasten-
ers above stringer S-31 to
two fasteners below
stringer S-35, left and right
side, for any crack.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 12 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 13

Group 2:
Table 2  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB530078-00 Issue 001
or later approved issues
as an accepted proce-
dure:
Method of ComplianceActionCondition
PART 2: CLOSE ACCESS-ACTION 1:CONDITION 3: ANY
CRACK FOUND DURING
INSPECTION OF THE
AWWB BODY CHORD
FORWARD EDGES.
Contact The Boeing Com-
pany for repair instructions
and do the repair.
PART 1: OPEN ACCESS-ACTION 2:
Repeat the HFEC inspec-
tion of the forward edge of
the horizontal flange of the
AWWB body chord be-
tween WL 132 and WL
152, left and right side, and
between left BL 41 and
right BL 41, for any crack.
*[1]
-Task 2
PART 2: CLOSE ACCESS-
PART 1: OPEN ACCESS-Repeat the HFEC inspec-
tion of the forward edge of
the horizontal flange of the
AWWB body chord be-
tween WL 132 and WL
152, left and right side, and
between left BL 41 and
right BL 41, for any crack.
*[1]
CONDITION 4: NO
CRACK FOUND DURING
INSPECTION OF THE
AWWB BODY CHORD
FORWARD EDGES.
Task 2
PART 2: CLOSE ACCESS-
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 13 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 14

Group 2:
Table 2  Body Station (STA) 1209 Aft Wheel Well Bulkhead Body Chord - High Frequency Eddy Current (HFEC) 
Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB530078-00 Issue 001
or later approved issues
as an accepted proce-
dure:
Method of ComplianceActionCondition
PART 4: CLOSE ACCESS-ACTION 1:CONDITION 5: ANY
CRACK FOUND DURING
INSPECTION OF THE
AWWB BODY CHORD
HORIZONTAL FLANGE.
Contact The Boeing Com-
pany for repair instructions
and do the repair.
PART 3: OPEN ACCESS-ACTION 2:
Repeat the HFEC inspec-
tion around all the fastener
heads and vertical beam
clips common to the
AWWB body chord horizon-
tal flange from two fasten-
ers above stringer S-31 to
two fasteners below
stringer S-35, left and right
side, for any crack. *[1]
-Task 3
PART 4: CLOSE ACCESS-
PART 3: OPEN ACCESS-Repeat the HFEC inspec-
tion around all the fastener
heads and vertical beam
clips common to the
AWWB body chord horizon-
tal flange from two fasten-
ers above stringer S-31 to
two fasteners below
stringer S-35, left and right
side, for any crack. *[1]
CONDITION 6: NO
CRACK FOUND DURING
INSPECTION OF THE
AWWB BODY CHORD
HORIZONTAL FLANGE.
-Task 3
PART 4: CLOSE ACCESS-
*[1]  It is not required to do the inspections in accordance with Requirements Bulletin B787-81205-SB530078-00 RB in areas where a repair
covers the affected inspection area and meets the following conditions:
1.The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB530078-00 RB and installed
after the Issue Issue 001 date of the Requirements Bulletin B787-81205-SB530078-00 RB.
2. The repair was approved by the Boeing Organization Designation Authorization (ODA) via an FAA Form 8100-9 which contains a
repeat inspection program for the subject area.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 14 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 15

Task 1 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC
INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 15 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 16 (OCR)

OBOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA  >
1209
BL
VL 146  46
RBL 91  (VIEW LOOKING AFT, STA 1209)  AFT WHEEL WELL BULKHEAD  LBL 91/
ICN-B787-A-000061-A-81205-17675-A-01-1
Figure 1
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 16 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 17 (OCR)

Q BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
WL 146
1) BODY CHORD
LEFT SIDE BODY CHORD
FWD
AN INSPECTION AREA
ICN-B787-A-000061-A-81205-17676-A-01-1
Figure 2
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 17 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 18 (OCR)

_BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
WL 146
BODY CHORD 1
RIGHT SIDE BODY CHORD
FWD
IT INSPECTION AREA
ICN-B787-A-000061-A-81205-17677-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 18 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 19

Table 1  
More DataQtyIdentificationNameActionStep
*[1]--AWWB BODY CHORDInspect1
*[1]  Do a surface HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between left WL 146 and right
WL 146, in accordance with 787 NDT Manual Part 6, 53-20-06 Temporary Revision (TR) 06-1016 dated Feb 24/2020, or 787 NDT
Manual Part 6, 53-20-06 that incorporates 787 NDT Manual Part 6, 53-20-06 TR 06-1016 dated Feb 24/2020 or later Boeing approved
revisions.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 19 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 20

Task 2 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC
INSPECTION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 20 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 21 (OCR)

Q BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1209
WL 152 - -  - - WL 152
/L 132
132
RBL 41  LBL 41
AFT WHEEL WELL BULKHEAD
(VIEW LOOKING AFT, STA 1209)
2916451
ICN-B787-A-000061-A-81205-17678-A-01-1
Figure 1
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 21 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 22 (OCR)

@ BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
• WL 152
BODY CHORD 1-
WL 132
IBD
FWD
WL 152•
1) BODY CHORD
WL 132
FWD  • INSPECTION AREA  6608
ICN-B787-A-000061-A-81205-17679-A-01-1
Figure 2
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 22 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 23 (OCR)

@ BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
BODY CHORD (  ) BODY CHORD
SHEAR TIE FITTINGS
DO INSPECTION AREA
AFT WHEEL WELL BULKHEAD
(VIEW LOOKING AFT, STA 1209)
D
2916630
ICN-B787-A-000061-A-81205-17680-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 23 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 24

Table 1  
More DataQtyIdentificationNameActionStep
*[1]--AWWB BODY CHORDInspect1
*[2]--AWWB BODY CHORDInspect2
*[1]  Do a surface HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between WL 132 and WL 152
, left and right side, in accordance with 787 NDT Manual Part 6, 53-20-05 Temporary Revision (TR) 06-1017 dated Feb 24/2020, or
787 NDT Manual Part 6, 53-20-05 that incorporates 787 NDT Manual Part 6, 53-20-05 TR 06-1017 dated Feb 24/2020 or later Boeing
approved revisions.
*[2]  Do a surface HFEC inspection of the forward edge of the horizontal flange of the AWWB body chord between left BL 41 and right BL
41, including areas behind the shear tie fittings, in accordance with 787 NDT Manual Part 6, 53-20-03 Temporary Revision (TR) 06-
1008 dated Feb 13/2020, or 787 NDT Manual Part 6, 53-20-03 that incorporates 787 NDT Manual Part 6, 53-20-03 TR 06-1008
dated Feb 13/2020 or later Boeing approved revisions.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 24 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 25

Task 3 – STA 1209 AFT WHEEL WELL BULKHEAD BODY CHORD HFEC
INSPECTION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 25 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

### Page 26 (OCR)

Q BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1209
S-31L  S-31R
S-35L  S-35R
AFT WHEEL WELL BULKHEAD
(VIEW LOOKING FORWARD, STA 1209)
ICN-B787-A-000061-A-81205-17681-A-01-1
Figure 1
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 26 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 27 (OCR)

Q BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
STA
1209
- -
S-31L
VERTICAL
BEAM CLIP
S-31L
S-35L
BODY CHORD
LEFT SIDE AFT WHEEL WELL
BULKHEAD
S-35L  (VIEW LOOKING FORWARD, STA 1209)
B
INSPECTIONAREA
2917046
ICN-B787-A-000061-A-81205-17682-A-01-1
Figure 2
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 27 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 28 (OCR)

Q BOEING  B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN
STA
1209
*S-31R
VERTICAL
BEAM CLIF
S-31R
S-35R
BODY CHORD
RIGHT SIDE AFT WHEEL WELL
BULKHEAD
(VIEW LOOKING FORWARD, STA 1209)  S-35R
C
INSPECTION AREA
2917081
ICN-B787-A-000061-A-81205-17683-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 28 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 29

Table 1  
More DataQtyIdentificationNameActionStep
*[1]--AWWB BODY CHORDInspect1
*[1]  Do a surface HFEC inspection around all the fastener heads and vertical beam clips common to the AWWB body chord horizontal
flange from two fasteners above stringer S-31 to two fasteners below stringer S-35, left and right side, in accordance with 787 NDT
Manual Part 6, 53-20-04 Temporary Revision (TR) 06-1020 dated Mar 03/2020, or 787 NDT Manual Part 6, 53-20-04 that incorporates
787 NDT Manual Part 6, 53-20-04 TR 06-1020 dated Mar 03/2020 or later Boeing approved revisions.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
Page 29 of 29
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB530078-00 RB
Issue 001, 08 Sep 2020 9:08:12 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
