# Boeing Alert Requirements Bulletin B787-81205-SB530084-00 RB

## Copies (3)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 002, part 2 of 2 ("78753A0084 RequirementBulletin Issue002--part2_"), 160 pages: PDF https://openairdocs.org/files/sha256/48/f8/48f8fc59e0756125f1bd2487b93eaabefefb028b96a1ff83d84992ec050814a5; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530084-00-rb/file/48f8fc59e075.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001 ("B787-81205-SB530084-00_RB_Issue001"), 393 pages: PDF https://openairdocs.org/files/sha256/87/c7/87c7f5ccae2523d5dec0bafda3523883005298f5be70c3bb655b89b392591437; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530084-00-rb/file/87c7f5ccae25.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- 78753A0084 RequirementBulletin Issue002--Part1_, part 1 of 1 ("78753A0084 RequirementBulletin Issue002--Part1_"), 237 pages: PDF https://openairdocs.org/files/sha256/5a/35/5a358be76a96525c315398b3870e92f9cc206ae1a160ef96006728ba3cbbc104; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530084-00-rb/file/5a358be76a96.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530084-00 RB
- Latest revision known: B787-81205-SB530084-00 RB, Issue 002, dated September 5, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530084-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-06-13](https://openairdocs.org/ad/2025-06-13.md), effective Jul 2, 2025: Revisions 001 and 002

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530084-00-rb/proposed.md).

## Text (160 pages)

Revision 002, part 2 of 2, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-1301; AD 2025-06-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

A BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1 11 LOCATIONS
A-A
11 LOCATIONS
NBD
VIEW LOOKING AFT
B-B
ICN-B787-A-000061-A-81205-19287-A-01-1
Figure 2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 238 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 2

ICN-B787-A-000061-A-81205-19288-A-01-1
Figure 3  
1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]11-HOLEDrill 1
1461Z3408-203FLOOR BEAM FIT-
TING
Install (New)2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 239 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

Table 1  
More DataQtyIdentificationNameActionStep
Refer to the fastener
code table.
11-BOLTInstall (New)3
Refer to the fastener
code table.
11-COLLARInstall (New)
*[4]1-GAPMeasure4
*[5]-403Z1568-( )SPACERInstall (New)5
*[6]*[7]2BACB30MR8A14BOLTInstall (New)6
2403Z1563-1RETAINER WASHERInstall (New)
4403Z1580-1CROWFOOT LOCK
WASHER
Install (New)
4403Z1501-5BUSHINGInstall (New)
2403Z1563-2RETAINER WASHERInstall (New)
*[8]-BACW10BP( )PKWASHERInstall (Kept)
*[6]2BACN11Z8CKNUTInstall (New)
*[1]  
Align new SOB fitting pilot holes with the removed SOB fitting and match drill frame holes to new SOB fitting. Refer to SOPM 20-10-
07 as an accepted procedure.
*[2]  Chamfer edges of fastener holes common to the SOB fitting. Refer to SOPM 20-10-07 as an accepted procedure.
*[3]  Refer to fastener code tables for the match-drill hole diameter.
*[4]  Measure the gap between the SOB fitting and the floor beam assembly. Make sure the gap is less than or equal to 0.008 inch. If the
gap is greater than 0.008 inch, install spacer(s).
*[5]  A maximum of 3 spacers may be installed if there is a gap greater than 0.008 inch. After spacer installation, the maximum acceptable
gap prior to bolt installation is 0.008 inch. Make sure that the total spacer thickness does not exceed 0.12 inch.
*[6]  Refer to SOPM 20-50-01 as an accepted procedure.
*[7]  Fastener installation direction is optional.
*[8]  If kept part cannot be installed, install a new part. Refer to 787-9 SRM 51-41-07 Rev 28 or 787-10 SRM 51-41-07 Rev 14 or later approved
revision published on MyBoeingFleet as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 240 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

ICN-B787-A-000061-A-81205-09082-A-01-1
Figure 4  
2.  
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the Task.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this Task.
Table 2  
More DataHole DiaQtyIdentificationNameCode
*[1]0.250 - 0.253-BACB30NX()K()BOLTTCE
*[1]0.250 - 0.253-BACC30AB()ACOLLAR
First oversize.0.266 - 0.269-BACB30NX()K()XBOLT
First oversize.0.266 - 0.269-BACC30AB()AYCOLLAR
*[1]  
Refer to SOPM 20-50-18 as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 241 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

Task 24 – STA 1425 RIGHT SIDE SOB FITTING REMOVAL AND INSPECTION
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 242 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6 (OCR)

@ BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1593
STA
1233
STA
1425
¿ B
TYPICAL
3045002
ICN-B787-A-000061-A-81205-19289-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 243 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 7 (OCR)

A BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
2) 4 LOCATIONS
INBD
•
•
10 LOCATIONS  INBD
VIEW LOOKING AFT
A-A
14 LOCATIONS
VIEW LOOKING AFT
B-B
ICN-B787-A-000061-A-81205-19290-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 244 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 8

Table 1  
More DataQtyIdentificationNameActionStep
10-BOLTRemove1
10-COLLARRemove
4-BOLTRemove2
4-WASHERRemove
4-COLLARRemove
2BACB30MR8A14BOLTRemove3
4403Z1563-( )RETAINER WASHERRemove
4403Z1580-1CROWFOOT LOCK
WASHER
Remove
4403Z1501-5BUSHINGRemove
*[1]-BACW10BP( )PKWASHERRemove / Keep
2BACN11Z8CKNUTRemove
1461Z3409-204FLOOR BEAM FIT-
TING
Remove4
*[2]14-FASTENER HOLESInspect5
*[2]1-FRAMEInspect
*[1]  
If installed to adjust grip length.
*[2]  Do a detailed inspection of the fuselage frame and fastener holes for any damage. Damage is defined in 787-9 SRM 51-13-01 Rev
28 / 787-10 SRM 51-13-01 Rev 14 or later approved revisions published on MyBoeingFleet.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 245 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Task 25 – STA 1425 RIGHT SIDE SOB FITTING INSTALLATION [Group 1:
]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 246 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10 (OCR)

@ BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1593
STA
1233
STA
1425
¿ B
TYPICAL
3045004
ICN-B787-A-000061-A-81205-19291-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 247 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 11 (OCR)

@ BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1 14 LOCATIONS
A-A  INBD
TOS 8F 4-
4 LOCATIONS
TCE 8F
10 LOCATIONS
VIEW LOOKING AFT  3045005
B-B
ICN-B787-A-000061-A-81205-19292-A-01-1
Figure 2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 248 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 12

ICN-B787-A-000061-A-81205-19293-A-01-1
Figure 3  
1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]14-HOLEDrill 1
1461Z3409-204FLOOR BEAM FIT-
TING
Install (New)2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 249 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

Table 1  
More DataQtyIdentificationNameActionStep
Refer to the fastener
code table.
10-BOLTInstall (New)3
Refer to the fastener
code table.
10-COLLARInstall (New)
Refer to the fastener
code table.
4-BOLTInstall (New)4
*[4]4BACW10EV8CKWASHERInstall (New)
Refer to the fastener
code table.
4-COLLARInstall (New)
*[5]1-GAPMeasure5
*[6]-403Z1568-( )SPACERInstall (New)6
*[7]*[8]2BACB30MR8A14BOLTInstall (New)7
2403Z1563-1RETAINER WASHERInstall (New)
4403Z1580-1CROWFOOT LOCK
WASHER
Install (New)
4403Z1501-5BUSHINGInstall (New)
2403Z1563-2RETAINER WASHERInstall (New)
*[9]-BACW10BP( )PKWASHERInstall (Kept)
*[7]2BACN11Z8CKNUTInstall (New)
*[1]  
Align new SOB fitting pilot holes with the removed SOB fitting and match drill frame holes to new SOB fitting. Refer to SOPM 20-10-
07 as an accepted procedure.
*[2]  Chamfer edges of fastener holes common to the SOB fitting. Refer to SOPM 20-10-07 as an accepted procedure.
*[3]  Refer to fastener code tables for the match-drill hole diameter.
*[4]  Install washer under bolt head.
*[5]  Measure the gap between the SOB fitting and the floor beam assembly. Make sure the gap is less than or equal to 0.008 inch. If the
gap is greater than 0.008 inch, install spacer(s).
*[6]  A maximum of 3 spacers may be installed if there is a gap greater than 0.008 inch. After spacer installation, the maximum acceptable
gap prior to bolt installation is 0.008 inch. Make sure that the total spacer thickness does not exceed 0.16 inch.
*[7]  Refer to SOPM 20-50-01 as an accepted procedure.
*[8]  Fastener installation direction is optional.
*[9]  If kept part cannot be installed, install a new part. Refer to 787-9 SRM 51-41-07 Rev 28 or 787-10 SRM 51-41-07 Rev 14 or later approved
revision published on MyBoeingFleet as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 250 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

ICN-B787-A-000061-A-81205-09082-A-01-1
Figure 4  
2.  
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the Task.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this Task.
Table 2  
More DataHole DiaQtyIdentificationNameCode
*[1]0.250 - 0.253-BACB30NX()K()BOLTTCE
*[1]0.250 - 0.253-BACC30AB()ACOLLAR
First oversize.0.266 - 0.269-BACB30NX()K()XBOLT
First oversize.0.266 - 0.269-BACC30AB()AYCOLLAR
*[1]0.250 - 0.253-BACB31E()K()BOLTTDS
*[1]0.250 - 0.253-BACC30CT()KCOLLAR
First oversize.0.266 - 0.269-BACB30NX()K()XBOLT
First oversize.0.266 - 0.269-BACC30BH()KCOLLAR
*[1]  
Refer to SOPM 20-50-18 as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 251 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

Task 26 – STA 1449, 1473, 1497, 1521, 1545, 1569 AND 1593 LEFT SIDE
SOB FITTING INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 252 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16 (OCR)

@ BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1593  STA
1593
STA
1233
STA
1449
INBD
VIEW LOOKING AFT
(TYPICAL)
3040801
ICN-B787-A-000061-A-81205-19294-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 253 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 17

1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1461Z3408-203FLOOR BEAM FIT-
TING
Inspect1
*[1]  
Do an X-ray Fluorescence Spectrometer inspection of the SOB fitting to determine material type in accordance with Appendix A.
*[2]  As an option, do a High Frequency Eddy Current inspection of the SOB fitting to determine the material in accordance with 787 NDT
Manual Part 6, 51-00-13.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 254 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Task 27 – STA 1449, 1473, 1497, 1521, 1545, 1569 AND 1593 LEFT SIDE
SOB FITTING REMOVAL AND INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 255 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
1593  STA  1593  STA
STA
1233  STA
1449
TYPICAL
ICN-B787-A-000061-A-81205-19295-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 256 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 20 (OCR)

O BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
INBD
NBD  11 LOCATIONS
VIEW LOOKING AFT
A-A
11 LOCATIONS
VIEW LOOKING AFT  3041280
B-B
ICN-B787-A-000061-A-81205-19296-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
_ B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 257 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 21

Table 1  
More DataQtyIdentificationNameActionStep
11-BOLTRemove1
11-COLLARRemove
2BACB30MR8A14BOLTRemove2
4403Z1563-( )RETAINER WASHERRemove
4403Z1580-( )CROWFOOT LOCK
WASHER
Remove
4403Z1501-( )BUSHINGRemove
*[1]-BACW10BP( )PKWASHERRemove / Keep
2BACN11Z8CKNUTRemove
1461Z3408-203FLOOR BEAM FIT-
TING
Remove3
*[2]11-FASTENER HOLESInspect4
*[2]1-FRAMEInspect
*[1]  
If installed to adjust grip length.
*[2]  Do a detailed inspection of the fuselage frame and fastener holes for any damage. Damage is defined in 787-9 SRM 51-13-01 Rev
28 / 787-10 SRM 51-13-01 Rev 14 or later approved revisions published on MyBoeingFleet.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 258 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 22

Task 28 – STA 1449, 1473, 1497, 1521, 1545, 1569 AND 1593 LEFT SIDE
SOB FITTING INSTALLATION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 259 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 23 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
1593  STA  1593  STA
STA
1233  STA
1449
TYPICAL
ICN-B787-A-000061-A-81205-19297-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 260 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 24 (OCR)

A BOEING  Issue 002, 05 Sep 2024 12:00:00 AM  B787-81205-SB530084-00 RB
REQUIREMENTS BULLETIN
1 11 LOCATIONS
A-A
INBD  11 LOCATIONS
VIEW LOOKING AFT
B-B
ICN-B787-A-000061-A-81205-19298-A-01-1
Figure 2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 261 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 25

ICN-B787-A-000061-A-81205-19299-A-01-1
Figure 3  
1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]11-HOLEDrill 1
1461Z3408-203FLOOR BEAM FIT-
TING
Install (New)2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 262 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 26

Table 1  
More DataQtyIdentificationNameActionStep
Refer to the fastener
code table.
11-BOLTInstall (New)3
Refer to the fastener
code table.
11-COLLARInstall (New)
*[4]1-GAPMeasure4
*[5]-403Z1568-( )SPACERInstall (New)5
*[6]*[7]2BACB30MR8A14BOLTInstall (New)6
2403Z1563-1RETAINER WASHERInstall (New)
4403Z1580-1CROWFOOT LOCK
WASHER
Install (New)
4403Z1501-5BUSHINGInstall (New)
2403Z1563-2RETAINER WASHERInstall (New)
*[8]-BACW10BP( )PKWASHERInstall (Kept)
*[6]2BACN11Z8CKNUTInstall (New)
*[1]  
Align new SOB fitting pilot holes with the removed SOB fitting and match drill frame holes to new SOB fitting. Refer to SOPM 20-10-
07 as an accepted procedure.
*[2]  Chamfer edges of fastener holes common to the SOB fitting. Refer to SOPM 20-10-07 as an accepted procedure.
*[3]  Refer to fastener code tables for the match-drill hole diameter.
*[4]  Measure the gap between the SOB fitting and the floor beam assembly. Make sure the gap is less than or equal to 0.008 inch. If the
gap is greater than 0.008 inch, install spacer(s).
*[5]  A maximum of 3 spacers may be installed if there is a gap greater than 0.008 inch. After spacer installation, the maximum acceptable
gap prior to bolt installation is 0.008 inch. Make sure that the total spacer thickness does not exceed 0.16 inch at STA 1449, 1521 and
1545, 0.14 inch at STA 1473 and 1569, 0.12 inch at STA 1497, and 0.20 inch at STA 1593.
*[6]  Refer to SOPM 20-50-01 as an accepted procedure.
*[7]  Fastener installation direction is optional.
*[8]  If kept part cannot be installed, install a new part. Refer to 787-9 SRM 51-41-07 Rev 28 or 787-10 SRM 51-41-07 Rev 14 or later approved
revision published on MyBoeingFleet as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 263 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 27

ICN-B787-A-000061-A-81205-09082-A-01-1
Figure 4  
2.  
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the Task.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this Task.
Table 2  
More DataHole DiaQtyIdentificationNameCode
*[1]0.250 - 0.253-BACB30NX()K()BOLTTCE
*[1]0.250 - 0.253-BACC30AB()ACOLLAR
First oversize.0.266 - 0.269-BACB30NX()K()XBOLT
First oversize.0.266 - 0.269-BACC30AB()AYCOLLAR
*[1]  
Refer to SOPM 20-50-18 as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 264 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 28

Task 29 – STA 1233 LEFT AND RIGHT SIDE SOB FITTING INSPECTION
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 265 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 29 (OCR)

@BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
INBD  INBD
VIEW LOOKING AFT  VIEW LOOKING AFT
(TYPICAL)  (TYPICAL)
3040986
ICN-B787-A-000061-A-81205-19300-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 266 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 30

1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1461Z3401-203FLOOR BEAM FIT-
TING
Inspect1
*[1]*[2]1461Z3401-204FLOOR BEAM FIT-
TING
Inspect2
*[1]  
Do an X-ray Fluorescence Spectrometer inspection of the SOB fitting to determine material type in accordance with Appendix A.
*[2]  As an option, do a High Frequency Eddy Current inspection of the SOB fitting to determine the material in accordance with 787 NDT
Manual Part 6, 51-00-13.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 267 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 31

Task 30 – STA 1233 LEFT SIDE SOB FITTING REMOVAL AND INSPECTION
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 268 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 32 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
STA
1233
3040844
ICN-B787-A-000061-A-81205-19301-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 269 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 33 (OCR)

_BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
SINBD
•
•
18 LOCATIONS
VIEW LOOKING AFT
A-A
4) 18 LOCATIONS
VIEW LOOKING AFT  3040855
B-B
ICN-B787-A-000061-A-81205-19302-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 270 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 34

Table 1  
More DataQtyIdentificationNameActionStep
18-BOLTRemove1
18-COLLARRemove
2BACB30MR8A14BOLTRemove2
2BACW10BP8CKWASHERRemove
4403Z1514-5BUSHINGRemove
4403Z1512-5MICROLOCK WASH-
ER
Remove
2BACW10BP8PKWASHERRemove
2BACN11Z8CKNUTRemove
1461Z3401-203FLOOR BEAM FIT-
TING
Remove3
*[1]18-FASTENER HOLESInspect4
*[1]1-FRAMEInspect
*[1]  
Do a detailed inspection of the fuselage frame and fastener holes for any damage. Damage is defined in 787-9 SRM 51-13-01 Rev
28 / 787-10 SRM 51-13-01 Rev 14 or later approved revisions published on MyBoeingFleet.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 271 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 35

Task 31 – STA 1233 LEFT SIDE SOB FITTING INSTALLATION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 272 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 36 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
STA
233
3041004
ICN-B787-A-000061-A-81205-19303-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 273 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 37 (OCR)

OBOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
O18 LOCATIONS
A-A
•
18 LOCATIONS
NBD
VIEW LOOKING AFT
B-B
ICN-B787-A-000061-A-81205-19304-A-01-1
Figure 2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 274 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 38

ICN-B787-A-000061-A-81205-19305-A-01-1
Figure 3  
1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]18-HOLEDrill 1
1461Z3401-203FLOOR BEAM FIT-
TING
Install (New)2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 275 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 39

Table 1  
More DataQtyIdentificationNameActionStep
Refer to the fastener
code table.
18-BOLTInstall (New)3
Refer to the fastener
code table.
18-COLLARInstall (New)
*[4]1-GAPMeasure4
*[5]-403Z1568-( )SPACERInstall (New)5
*[6]*[7]2BACB30MR8A14BOLTInstall (New)6
2BACW10BP8CKWASHERInstall (New)
*[8]4403Z1514-5BUSHINGInstall (New)
*[8]4403Z1512-5MICROLOCK WASH-
ER
Install (New)
2BACW10BP8PKWASHERInstall (New)
*[6]2BACN11Z8CKNUTInstall (New)
*[1]  
Align new SOB fitting pilot holes with the removed SOB fitting and match drill frame holes to new SOB fitting. Refer to SOPM 20-10-
07 as an accepted procedure.
*[2]  Chamfer edges of fastener holes common to the SOB fitting. Refer to SOPM 20-10-07 as an accepted procedure.
*[3]  Refer to fastener code tables for the match-drill hole diameter.
*[4]  Measure the gap between the SOB fitting and the floor beam assembly. Make sure the gap is less than or equal to 0.008 inch. If the
gap is greater than 0.008 inch, install spacer(s).
*[5]  A maximum of 3 spacers may be installed if there is a gap greater than 0.008 inch. After spacer installation, the maximum acceptable
gap prior to bolt installation is 0.008 inch. Make sure that the total spacer thickness does not exceed 0.18 inch.
*[6]  Refer to SOPM 20-50-01 as an accepted procedure.
*[7]  Fastener installation direction is optional.
*[8]  Install the microlock washer by sliding the washer over the bushing until the washer tabs are locked in the bushing groove. Once installed,
make sure the washer rotates freely in the bushing groove.
ICN-B787-A-000061-A-81205-09082-A-01-1
Figure 4  
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 276 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 40

2.  
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the Task.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this Task.
Table 2  
More DataHole DiaQtyIdentificationNameCode
*[1]0.250 - 0.253-BACB30NX()K()BOLTTCE
*[1]0.250 - 0.253-BACC30AB()ACOLLAR
First oversize.0.266 - 0.269-BACB30NX()K()XBOLT
First oversize.0.266 - 0.269-BACC30AB()AYCOLLAR
*[1]  
Refer to SOPM 20-50-18 as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 277 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 41

Task 32 – STA 1233 RIGHT SIDE SOB FITTING REMOVAL AND INSPECTION
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 278 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 42 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
STA
1233
• B
3040828
ICN-B787-A-000061-A-81205-19306-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 279 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 43 (OCR)

A BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
INBD
•
INBD
18 LOCATIONS/
VIEW LOOKING AFT
A-A
18 LOCATIONS
VIEW LOOKING AFT
B-B
ICN-B787-A-000061-A-81205-19307-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 280 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 44

Table 1  
More DataQtyIdentificationNameActionStep
18-BOLTRemove1
18-COLLARRemove
2BACB30MR8A14BOLTRemove2
2BACW10BP8CKWASHERRemove
4403Z1514-5BUSHINGRemove
4403Z1512-5MICROLOCK WASH-
ER
Remove
2BACW10BP8PKWASHERRemove
2BACN11Z8CKNUTRemove
1461Z3401-204FLOOR BEAM FIT-
TING
Remove3
*[1]18-FASTENER HOLESInspect4
*[1]1-FRAMEInspect
*[1]  
Do a detailed inspection of the fuselage frame and fastener holes for any damage. Damage is defined in 787-9 SRM 51-13-01 Rev
28 / 787-10 SRM 51-13-01 Rev 14 or later approved revisions published on MyBoeingFleet.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 281 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 45

Task 33 – STA 1233 RIGHT SIDE SOB FITTING INSTALLATION [Group 2:
]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 282 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 46 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
STA
1233
• B
ICN-B787-A-000061-A-81205-19308-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 283 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 47 (OCR)

@ BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1) 18 LOCATIONS
A-A
TCE BE
18 LOCATIONS
INBD
VIEW LOOKING AFT  3040994
B-B
ICN-B787-A-000061-A-81205-19309-A-01-1
Figure 2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 284 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 48

ICN-B787-A-000061-A-81205-19310-A-01-1
Figure 3  
1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]18-HOLEDrill 1
1461Z3401-204FLOOR BEAM FIT-
TING
Install (New)2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 285 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 49

Table 1  
More DataQtyIdentificationNameActionStep
Refer to the fastener
code table.
18-BOLTInstall (New)3
Refer to the fastener
code table.
18-COLLARInstall (New)
*[4]1-GAPMeasure4
*[5]-403Z1568-( )SPACERInstall (New)5
*[6]*[7]2BACB30MR8A14BOLTInstall (New)6
2BACW10BP8CKWASHERInstall (New)
*[8]4403Z1514-5BUSHINGInstall (New)
*[8]4403Z1512-5MICROLOCK WASH-
ER
Install (New)
2BACW10BP8PKWASHERInstall (New)
*[6]2BACN11Z8CKNUTInstall (New)
*[1]  
Align new SOB fitting pilot holes with the removed SOB fitting and match drill frame holes to new SOB fitting. Refer to SOPM 20-10-
07 as an accepted procedure.
*[2]  Chamfer edges of fastener holes common to the SOB fitting. Refer to SOPM 20-10-07 as an accepted procedure.
*[3]  Refer to fastener code tables for the match-drill hole diameter.
*[4]  Measure the gap between the SOB fitting and the floor beam assembly. Make sure the gap is less than or equal to 0.008 inch. If the
gap is greater than 0.008 inch, install spacer(s).
*[5]  A maximum of 3 spacers may be installed if there is a gap greater than 0.008 inch. After spacer installation, the maximum acceptable
gap prior to bolt installation is 0.008 inch. Make sure that the total spacer thickness does not exceed 0.18 inch.
*[6]  Refer to SOPM 20-50-01 as an accepted procedure.
*[7]  Fastener installation direction is optional.
*[8]  Install the microlock washer by sliding the washer over the bushing until the washer tabs are locked in the bushing groove. Once installed,
make sure the washer rotates freely in the bushing groove.
.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 286 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 50

ICN-B787-A-000061-A-81205-09082-A-01-1
Figure 4  
2.  
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the Task.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this Task.
Table 2  
More DataHole DiaQtyIdentificationNameCode
*[1]0.250 - 0.253-BACB30NX()K()BOLTTCE
*[1]0.250 - 0.253-BACC30AB()ACOLLAR
First oversize.0.266 - 0.269-BACB30NX()K()XBOLT
First oversize.0.266 - 0.269-BACC30AB()AYCOLLAR
*[1]  
Refer to SOPM 20-50-18 as an accepted procedure.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 287 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 51

Task 34 – STA 1257 LEFT AND RIGHT SIDE SOB FITTING INSPECTION
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 288 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 52 (OCR)

Q BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
INBD  INBD
VIEW LOOKING AFT  VIEW LOOKING AFT
(TYPICAL)  (TYPICAL)
3040842
ICN-B787-A-000061-A-81205-19311-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 289 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 53

1.  The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1461Z3402-205FLOOR BEAM FIT-
TING
Inspect1
*[1]*[2]1461Z3402-206FLOOR BEAM FIT-
TING
Inspect2
*[1]  
Do an X-ray Fluorescence Spectrometer inspection of the SOB fitting to determine material type in accordance with Appendix A.
*[2]  As an option, do a High Frequency Eddy Current inspection of the SOB fitting to determine the material in accordance with 787 NDT
Manual Part 6, 51-00-13.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 290 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 54

Task 35 – STA 1257 LEFT SIDE SOB FITTING REMOVAL AND INSPECTION
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 291 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 55 (OCR)

_BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
1257
ICN-B787-A-000061-A-81205-19312-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 292 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 56 (OCR)

@BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
2 LOCATIONS (2
INBD
INBD
\ 16 LOCATIONS
VIEW LOOKING AFT
A-A
5) 18 LOCATIONS
VIEW LOOKING AFT  3041000
B-B
ICN-B787-A-000061-A-81205-19313-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 293 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 57

Table 1  
More DataQtyIdentificationNameActionStep
16-BOLTRemove1
16-COLLARRemove
2-BOLTRemove2
2-WASHERRemove
2-COLLARRemove
1BACB30MR9A( )BOLTRemove3
1BACW10BP9CKWASHERRemove
2403Z1514-6BUSHINGRemove
2403Z1512-6MICROLOCK WASH-
ER
Remove
1BACW10BP9PKWASHERRemove
1BACN11Z9CKNUTRemove
1461Z3402-205FLOOR BEAM FIT-
TING
Remove4
*[1]18-FASTENER HOLESInspect5
*[1]1-FRAMEInspect
*[1]  
Do a detailed inspection of the fuselage frame and fastener holes for any damage. Damage is defined in 787-9 SRM 51-13-01 Rev
28 / 787-10 SRM 51-13-01 Rev 14 or later approved revisions published on MyBoeingFleet.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 294 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 58

Task 36 – STA 1257 LEFT SIDE SOB FITTING INSTALLATION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 295 of 397
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 59 (OCR)

_BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1593
STA
1233
STA
1257
B
ICN-B787-A-000061-A-81205-19314-A-01-1
Figure 1
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 296 of 397
Export Controlled ECCN: 9E991
See page 1 for details

### Page 60 (OCR)

A BOEING  B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1 18 LOCATIONS
2 LOCATIONS (4
A-A
16 LOCATIONS
VIEW LOOKING AFT
B-B
ICN-B787-A-000061-A-81205-19315-A-01-1
Figure 2
B787-81205-SB530084-00 RB
Issue 002, 05 Sep 2024 12:00:00 AM
Page 297 of 397
Export Controlled ECCN: 9E991
See page 1 for details

The text continues at https://openairdocs.org/service-documents/boeing/b787-81205-sb530084-00-rb/file/48f8fc59e075.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
