# Boeing Alert Requirements Bulletin B787-81205-SB530085-00 RB

Copy: Revision 001 ("B787-81205-SB530085-00 RB Issue 001"), 73 pages: PDF https://openairdocs.org/files/sha256/9e/ee/9eeeb6da6de85ae2257e14f4e97cd416691b0f90885f016b3e9a26b91c6fead6; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530085-00-rb/file/9eeeb6da6de8.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2665; AD 2025-09-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530085-00 RB
- Latest revision known: B787-81205-SB530085-00 RB, Issue 001, dated March 6, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530085-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-09-12](https://openairdocs.org/ad/2025-09-12.md), effective Jun 18, 2025: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530085-00-rb/proposed.md).

## Text (73 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2665; AD 2025-09-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB530085-00 RB FUSELAGE -
Section 41 and 46 - Floor Panels and Seat Track - Sealant and Tape
Application
Copyright © 2024 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 1 of 73
Export Controlled ECCN: 9E991
See page 1 for details
3.0
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TASK 1 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION [Group 1] . 19
TASK 2 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION [Group 1] . 22
TASK 3 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE APPLICATION
[Group 1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
TASK 4 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION [Group 2] . 28
TASK 5 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION [Group 2] . 31
TASK 6 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE [Group 2] . 34
TASK 7 – STA 338 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION [Group 3] . . 37
TASK 8 – STA 338 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION [Group 3] . . 41
TASK 9 – STA 338 PASSENGER CABIN FLOOR SEAT TRACK TAPE DAM APPLICATION [Group 3] . 45
TASK 10 –STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION [Group 3] . 49
TASK 11 –STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION [Group 3] . 52
TASK 12 –STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE APPLICATION
[Group 3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
TASK 13 –STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION [Group 4] . 58
TASK 14 –STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION [Group 4] . 61
TASK 15 –STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE APPLICATION
[Group 4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Appendix A – GENERAL PASSENGER CABIN FLOOR SEAT TRACK SEALING REQUIREMENTS [Group
1-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 2 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 548, 582, 584, 587,
589, 591, 594, 596, 598, 601, 603, 605, 607, 610, 612, 614, 617, 619, 622, 624, 626, 629, 631,
633, 635, 638, 640, 642, 645, 647, 649, 651, 654, 656, 658, 661, 663, 665, 667, 670, 672, 674,
677-679, 681, 683, 686, 689-690, 693-695, 697, 699, 702, 704, 706-707, 709-713, 715, 718-722,
725-727, 729-731, 734, 736-738, 741, 743, 745, 747, 750, 752, 754, 757-759, 761-764, 766-768,
770-771, 773, 775-777, 779-784, 786-793, 795-811, 814-816, 818, 820, 822-826, 828, 830-832,
834, 836-838, 840-844, 846-848, 850-852, 854-862, 864-866, 868-874, 876-886, 888-892, 894-
897, 899-904, 906, 908-912, 914-918, 920, 922, 924-928, 930-940, 942-954, 956-964, 966-968,
970, 972-982, 984, 986-987, 989-990, 993-994, 996, 999, 1001-1002, 1004-1008, 1012-1013,
1017-1018, 1021-1022, 1024-1025, 1030, 1032, 1038, 1044, 1048, 1054, 1056, 1058, 1094 in 4
Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane
applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through
9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes that require sealant and moisture barrier tape in section
46 aft EE bays
-1
787-9 Airplanes that require sealant and moisture barrier tape in section
46 aft EE bays
-2
787-9 Airplanes that require sealant and tape dam in section 41 fwd
and section 46 aft EE bays
-3
787-10 Airplanes that require sealant and moisture barrier tape in
section 46 aft EE bays
-4
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
1ZA954 - ZA959
GroupVariable Number
1ZA963 - ZA965
GroupVariable Number
1ZA968 - ZA972
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 3 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
2ZB010 - ZB011
2ZB041 - ZB043
2ZB056 - ZB060
2ZB113 - ZB121
2ZB133 - ZB134
2ZB187 - ZB191
2ZB335 - ZB338
2ZB419
2ZB427 - ZB435
2ZB455 - ZB463
3ZB465 - ZB467
2ZB579
2ZB610
2ZB618
2ZB659
2ZB664
2ZB697 - ZB700
2ZB706 - ZB707
2ZB734
2ZB742 - ZB743
3ZB744 - ZB745
2ZB749 - ZB750
2ZB755 - ZB757
2ZB768
2ZB771 - ZB775
2ZB791 - ZB792
2ZB796 - ZB798
2ZB800 - ZB805
GroupVariable Number
3ZB810 - ZB811
2ZB815 - ZB817
2ZB831
2ZB834
2ZB841
2ZB858 - ZB863
2ZB890
2ZB893 - ZB903
2ZB908 - ZB918
2ZB924
2ZB926 - ZB927
2ZB934 - ZB943
2ZB967 - ZB971
2ZB977 - ZB978
2ZB980 - ZB985
2ZB993
3ZB994
2ZB995 - ZB996
4ZC003 - ZC015
4ZC036 - ZC048
4ZC061 - ZC069
4ZC101 - ZC102
4ZC116 - ZC117
4ZC126 - ZC129
4ZC151 - ZC152
4ZC155 - ZC158
4ZC211 - ZC216
4ZC221 - ZC225
GroupVariable Number
1ZD013 - ZD015
2ZE001
2ZE003 - ZE006
2ZE008
2ZE013
2ZE016 - ZE017
2ZE031 - ZE032
2ZE040 - ZE043
3ZE044 - ZE045
2ZE085 - ZE086
2ZE095 - ZE096
2ZE105 - ZE106
2ZE115
2ZE150
2ZE165 - ZE166
2ZE170 - ZE171
2ZE195 - ZE198
2ZE220 - ZE234
2ZE270
2ZE310 - ZE311
2ZE340 - ZE341
2ZE350 - ZE362
2ZE375
2ZE380
2ZE415 - ZE416
2ZE425 - ZE426
2ZE436
--
2. Spares Affected
None.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 4 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB530085-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB530085-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required action, based on the applicable condition in Table 7, 8, 9, 10 and 11 in accordance
with the Accomplishment Instructions.
Group 1:
Table 7  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
Within 5 years after the Issue 001 date of the Requirements Bul-
letin B787-81205-SB530085-00 RB.
Do a Detailed Inspec-
tion on the left and
right buttock lines
(BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA
1209 until the end of
the seat track for any
missing, damaged,
or deteriorated
sealant and missing,
damaged, or deterio-
rated moisture barri-
er tape.
All Airplanes.
-No further action re-
quired.
CONDITION 1:
NO MISSING, NO
DAMAGED AND NO
DETERIORATED
SEALANT AND NO
MISSING, NO DAM-
AGED AND NO DE-
TERIORATED
MOISTURE BARRI-
ER TAPE FOUND.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 5 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

Group 1:
Table 7  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
Before further flight.Apply sealant to
each affected area.
CONDITION 2:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
SEALANT
FOUND.*[1]*[2]
Before further flight.Apply moisture barri-
er tape to the seat
tracks.
CONDITION 3:
ANY MISSING,
DAMAGED, OR DE-
TERIORATED
MOISTURE BARRI-
ER TAPE
FOUND.*[1]*[3]
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
Group 2:
Table 8  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
Within 5 years after the Issue 001 date of the Requirements Bul-
letin B787-81205-SB530085-00 RB.
Do a Detailed Inspec-
tion on the left and
right buttock lines
(BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA
1209 until the end of
the seat track for any
missing, damaged,
or deteriorated
sealant and missing,
damaged, or deterio-
rated moisture barri-
er tape.
All Airplanes.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 6 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

Group 2:
Table 8  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
-No further action re-
quired.
CONDITION 4:
NO MISSING, NO
DAMAGED AND NO
DETERIORATED
SEALANT AND NO
MISSING, NO DAM-
AGED AND NO DE-
TERIORATED
MOISTURE BARRI-
ER TAPE FOUND.
Before further flight.Apply sealant to
each affected area.
CONDITION 5:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
SEALANT
FOUND.*[1]*[2]
Before further flight.Apply moisture barri-
er tape at each affect-
ed area.
CONDITION 6:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
MOISTURE BARRI-
ER TAPE
FOUND.*[1]*[3]
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 7 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

Group 3:
Table 9  Section 41 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Tape Dam Application
Boeing Recommended Compliance TimeActionCondition
Within 5 years after the Issue 001 date of the Requirements Bul-
letin B787-81205-SB530085-00 RB.
Do a Detailed Inspec-
tion on seat tracks
from STA 338 to for-
ward end of seat
tracks at left and
right buttock lines
(BL) 66 and BL 86.5
in the forward Elec-
tronic Equipment Bay
Sealing Zone for any
missing, damaged,
or deteriorated
sealant in the vertical
gaps at the seat
track ends and any
missing, damaged or
deteriorated tape
dams.
All Airplanes.
-No further action re-
quired.
CONDITION 7:
NO MISSING, NO
DAMAGED AND NO
DETERIORATED
SEALANT AND NO
MISSING, NO DAM-
AGED AND NO DE-
TERIORATED
MOISTURE BARRI-
ER TAPE FOUND.
Before further flight.Apply sealant to
each affected area.
CONDITION 8:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
SEALANT
FOUND.*[1]*[2]
Before further flight.Apply tape dam to
each affected area.
CONDITION 9:
ANY MISSING,
DAMAGED OR DE-
TERIORATED TAPE
DAMS FOUND.*[1]*[3]
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 8 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Group 3:
Table 10  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
Within 5 years after the Issue 001 date of the Requirements Bul-
letin B787-81205-SB530085-00 RB.
Do a Detailed Inspec-
tion on the left and
right buttock lines
(BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA
1209 until the end of
the seat track for any
missing, damaged,
or deteriorated
sealant and missing,
damaged, or deterio-
rated moisture barri-
er tape.
All Airplanes.
-No further action re-
quired.
CONDITION 10:
NO MISSING, NO
DAMAGED AND NO
DETERIORATED
SEALANT AND NO
MISSING, NO DAM-
AGED AND NO DE-
TERIORATED
MOISTURE BARRI-
ER TAPE
FOUND.ISTURE
BARRIER TAPE
FOUND ON THE
SEAT TRACK AND
IS UNDAMAGED.
Before further flight.Apply sealant to
each affected area.
CONDITION 11:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
SEALANT
FOUND.*[1]*[2]
Before further flight.Apply moisture barri-
er tape to each affect-
ed area.
CONDITION 12:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
MOISTURE BARRI-
ER TAPE
FOUND.*[1]*[3]
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 9 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Group 3:
Table 10  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
Group 4:
Table 11  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
Within 5 years after the Issue 001 date of the Requirements Bul-
letin B787-81205-SB530085-00 RB.
Do a Detailed Inspec-
tion on the left and
right buttock lines
(BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA
1209 until the end of
the seat track for any
missing, damaged,
or deteriorated
sealant and missing,
damaged, or deterio-
rated moisture barri-
er tape.
All Airplanes.
-No further action re-
quired.
CONDITION 13:
NO MISSING, NO
DAMAGED AND NO
DETERIORATED
SEALANT AND NO
MISSING, NO DAM-
AGED AND NO DE-
TERIORATED
MOISTURE BARRI-
ER TAPE FOUND.
Before further flight.Apply sealant to
each affected area.
CONDITION 14:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
SEALANT
FOUND.*[1]*[2]
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 10 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Group 4:
Table 11  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Boeing Recommended Compliance TimeActionCondition
Before further flight.Apply moisture barri-
er tape to each affect-
ed area.
CONDITION 15:
ANY MISSING,
DAMAGED OR DE-
TERIORATED
MOISTURE BARRI-
ER TAPE
FOUND.*[1]*[3]
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 11 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Use of colors in Tasks is based on guidance from the S1000D International specification
for technical publications.
6. Use the approved fastener, process and material substitutions in accordance with SRM
Chapter 51.
7. If the length of any fastener specified in this bulletin does not meet the installation stan-
dards in SRM Chapter 51, then a fastener of the same specification, or an approved
substitute, with a length which meets the installation standards in SRM Chapter 51 may
be used. In addition, washers may be installed for fastener grip length in accordance with
SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws)
needed for installation in this bulletin.
8. Unless shown differently, these dimensions and tolerances are used:
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 12 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
9. A Detailed Inspection is defined as: An intensive examination of a specific item, installation,
or assembly to detect damage, failure, or irregularity. Available lighting is normally sup-
plemented with a direct source of good lighting at an intensity deemed appropriate. In-
spection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface
cleaning and elaborate procedures may be required.
10. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
12. The CONDITIONS, ACTIONS and OPTIONS shown apply to each seat track location
independently.
13. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
– Requirements
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 13 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

Group 1:
Table 1  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Refer to the listed proce-
dures in SB B787-81205-
SB53A0085-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of complianceActionCondition
1: GAIN ACCESS.-Do a Detailed Inspection
on the left and right buttock
lines (BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA 1209 until
the end of the seat track
for any missing, damaged,
or deteriorated sealant and
missing, damaged, or dete-
riorated moisture barrier
tape.
All Airplanes
-Task 1
--No further action required.CONDITION 1:
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED SEALANT AND
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED MOISTURE BAR-
RIER TAPE FOUND.
-Task 2Apply sealant to each af-
fected area.
CONDITION 2:
ANY MISSING, DAM-
AGED OR DETERIORAT-
ED SEALANT
FOUND.*[1]*[2]
-Task 3Apply moisture barrier tape
to each affected area.
CONDITION 3:
ANY MISSING, DAM-
AGED, OR DETERIORAT-
ED MOISTURE BARRIER
TAPE FOUND.*[1]*[3]
Part 2: CLOSE ACCESS.-
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 14 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

Group 2:
Table 2  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Refer to the listed proce-
dures in SB B787-81205-
SB53A0085-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of complianceActionCondition
Part 1: GAIN ACCESS.-Do a Detailed Inspection
on the left and right buttock
lines (BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA 1209 until
the end of the seat track
for any missing, damaged,
or deteriorated sealant and
missing, damaged, or dete-
riorated moisture barrier
tape.
All Airplanes
-Task 4
--No further action required.CONDITION 4:
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED SEALANT AND
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED MOISTURE BAR-
RIER TAPE FOUND.
-Task 5Apply sealant to all affect-
ed areas.
CONDITION 5:
ANY MISSING, DAM-
AGED OR DETERIORAT-
ED SEALANT
FOUND.*[1]*[2]
-Task 6Apply moisture barrier tape
to all affected areas.
CONDITION 6:
ANY MISSING, DAM-
AGED, OR DETERIORAT-
ED MOISTURE BARRIER
TAPE FOUND.*[1]*[3]
Part 2: CLOSE ACCESS.-
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 15 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16

Group 3:
Table 3  Section 41 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Tape Dam Application
Refer to the listed proce-
dures in SB B787-81205-
SB53A0085-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of complianceActionCondition
Part 1: GAIN ACCESS.-Do a Detailed Inspection
on seat tracks from STA
338 to forward end of seat
tracks at left and right but-
tock lines (BL) 66 and BL
86.5 in the forward Elec-
tronic Equipment Bay
Sealing Zone for any
missing, damaged, or dete-
riorated sealant in the ver-
tical gaps at the seat track
ends and any missing,
damaged or deteriorated
tape dams.
All Airplanes
-Task 7
--No further action required.CONDITION 7:
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED SEALANT AND
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED TAPE DAMS
FOUND.
-Task 8Apply sealant to affected
areas.
CONDITION 8:
ANY MISSING, DAM-
AGED OR DETERIORAT-
ED SEALANT
FOUND.*[1]*[2]
-Task 9Apply tape dams to all af-
fected areas
CONDITION 9:
ANY MISSING, DAM-
AGED OR DETERIORAT-
ED TAPE DAMS
FOUND.*[1]*[3]
Part 2: CLOSE ACCESS.-
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 16 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 17

Group 3:
Table 4  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Refer to the listed proce-
dures in SB B787-81205-
SB53A0085-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of complianceActionCondition
Part 1: GAIN ACCESS.-Do a Detailed Inspection
on the left and right buttock
lines (BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA 1209 until
the end of the seat track
for any missing, damaged,
or deteriorated sealant and
missing, damaged, or dete-
riorated moisture barrier
tape.
All Airplanes
-Task 10
--No further action required.CONDITION 10:
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED SEALANT AND
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED MOISTURE BAR-
RIER TAPE FOUND.
-Task 11Apply sealant to all affect-
ed areas.
CONDITION 11:
ANY MISSING, DAM-
AGED OR DETERIORAT-
ED SEALANT
FOUND.*[1]*[2]
-Task 12Apply moisture barrier tape
to all affected areas.
CONDITION 12:
ANY MISSING, DAM-
AGED, OR DETERIORAT-
ED MOISTURE BARRIER
TAPE FOUND.*[1]*[3]
Part 2: CLOSE ACCESS.-
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 17 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Group 4:
Table 5  Section 46 Passenger Cabin Floor Seat Track Detailed Inspection, Sealant and Moisture Barrier Tape 
Application
Refer to the listed proce-
dures in SB B787-81205-
SB53A0085-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of complianceActionCondition
Part 1: GAIN ACCESS.-Do a Detailed Inspection
on the left and right buttock
lines (BL) 11, BL 19, BL
39.5, and BL 66 seat
tracks from STA 1209 until
the end of the seat track
for any missing, damaged,
or deteriorated sealant and
missing, damaged, or dete-
riorated moisture barrier
tape.
All Airplanes
-Task 13
--No Further Action required.CONDITION 13:
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED SEALANT AND
NO MISSING, NO DAM-
AGED AND NO DETERIO-
RATED MOISTURE BAR-
RIER TAPE FOUND.
-Task 14Apply sealant to all affect-
ed areas.
CONDITION 14:
ANY MISSING, DAM-
AGED OR DETERIORAT-
ED SEALANT
FOUND.*[1]*[2]
-Task 15Apply moisture barrier tape
to all affected areas.
CONDITION 15:
ANY MISSING, DAM-
AGED, OR DETERIORAT-
ED MOISTURE BARRIER
TAPE FOUND.*[1]*[3]
Part 2: CLOSE ACCESS.-
*[1]  Disposition each seat track individually for the given conditions.
*[2]  Damaged or deteriorated sealant is defined as sealant with any crack, gap or disbondment of the seal.
*[3]  Damaged or deteriorated moisture barrier tape is defined as tape with any tear or hole that overlaps any seat track hole.
Group 1-4:
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 18 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19

Task 1 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED
INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 19 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 20 (OCR)

A BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
19 pet  LBL  RBL  19
LEL  RBL  59.5  RBL
66
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
DETAILED INSPECTION  (VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19404-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 20 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 21

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]--SEAT TRACKSInspect1
*[1]  From STA 1209 to the end of seat track, do a detailed inspection for missing, damaged, or deteriorated sealant between the seat track
and floor panels as well as in the vertical gaps at the adjacent floor panels. Refer to Appendix A Figures 1 and 2.
*[2]  From STA 1209 to the end of seat track, do a detailed inspection of moisture barrier tape for any missing, damaged or deteriorated
sections. Moisture barrier tape missing sections due to installation of mount fittings into the seat track are acceptable. Refer to Appendix
A Figure 4.
*[3]  At seat track ends, do a detailed inspection for missing, damaged or deteriorated sealant in the vertical gaps of the floor panels and
the horizontal gap of the seat track to floor panel interface. Refer to Appendix A Figure 3.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 21 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 22

Task 2 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT
APPLICATION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 22 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 23 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
D
LEL 39.5  FBL 19  RBL  RBL  39.5 RBL
66
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19405-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 23 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 24

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]*[4]*[5]*[6]-BAC 5010, TYPE 60
(RTV102)
SEALANTApply1
*[1]  Apply fillet seal between the seat track and floor panels from STA 1209 to the end of seat track, to completely seal the gap between
seat track and floor panels. Refer to Appendix A Figure 1, SOPM 20-50-12 and SOPM 20-50-19 as an accepted procedure.
*[2]  Make sure the fillet seal completely fills the gap between the seat track and the floor panel.
*[3]  Seal all gaps between two adjacent floor panels from the top of the floor panel to the top of the seat track. Refer to Appendix A Figure
2 as an accepted procedure.
*[4]  At the end of seat tracks, verify all gaps are sealed with sealant. Seal any unsealed floor panel to floor panel (vertical) gaps from the
top of the floor panel to the top of the seat track. Seal any unsealed floor panel to seat track interface (horizontal) gaps. Refer to Appendix
A Figure 3 for typical locations of sealant application.
*[5]  For seat track to floor panel gaps already sealed with previously installed tape, or sealant, the addition of fillet sealant is not required.
*[6]  For areas of already existing sealant that are deteriorated or damaged, remove affected sealant area and reseal using sealant ensuring
no gaps and overlaps with existing sealant. Refer to SOPM 20-30-03 as an accepted procedure.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 24 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 25

Task 3 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE
BARRIER TAPE APPLICATION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 25 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 26 (OCR)

A BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
19 LBL  LBL  RBL  19
RBL  59.5  RBL
66
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19406-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 26 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 27

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]-BMS8-346, TYPE 1,
CLASS 1, 1 INCH
MOISTURE BARRIER
TAPE
Apply1
*[1]  If moisture barrier tape is missing, install minimum 1 inch wide moisture barrier tape over seat track holes for the entire length of the
applicable seat track length.
*[2]  Do not apply moisture barrier tape underneath any seat track mounted fitting locations.
*[3]  If moisture barrier tape is damaged or deteriorated, then splice a new piece of tape at the affected area with overlap of 0.5 inch or
more with existing tape, with a maximum of two layers at any location. Make sure that there is no tape overlap over a seat track hole.
Refer to Appendix A Figure 4 as an accepted procedure.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 27 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 28

Task 4 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED
INSPECTION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 2.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 28 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 29 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
D
LBL
LBL  LBL  19 LBL  11  RBL 19  RBL  RBL  66
66  39.5  11
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
DETAILED INSPECTION  (VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19407-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 29 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 30

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]--SEAT TRACKSInspect1
*[1]  From STA 1209 to the end of seat track, do a detailed inspection for missing, damaged, or deteriorated sealant between the seat track
and floor panels as well as in the vertical gaps at the adjacent floor panels. Refer to Appendix A Figures 1 and 2.
*[2]  From STA 1209 to the end of seat track, do a detailed inspection of moisture barrier tape over seat track for any damage or if it is
missing. Moisture barrier tape missing sections due to installation of mount fittings into the seat track are acceptable. Refer to Appendix
A Figure 4
*[3]  At seat track ends, do a detailed inspection for missing, damaged or deteriorated sealant in the vertical gaps of the floor panels and
the horizontal gap of the seat track to floor panel interface. Refer to Appendix A Figure 3.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 30 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 31

Task 5 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT
APPLICATION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 2.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 31 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 32 (OCR)

A BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
LBL
19 LBL  RBL  RBL
LBL  66  39.5  LBL  11  RBL 19  39.5  RBL  66
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19408-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 32 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 33

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]*[4]*[5]*[6]-BAC 5010, TYPE 60
(RTV102)
SEALANTApply1
*[1]  For areas missing sealant, apply fillet seal between the seat track and floor panels from STA 1209 to the end of seat track, to com-
pletely seal the gap between seat track and floor panels. Refer to Appendix A Figure 1, SOPM 20-50-12 and SOPM 20-50-19 as an
accepted procedure.
*[2]  Make sure the fillet seal completely fills the gap between the seat track and the floor panel.
*[3]  Seal all gaps between two adjacent floor panels from the top of the floor panel to the top of the seat track. Refer to Appendix A Figure
2 as an accepted procedure.
*[4]  At the end of seat tracks, verify all gaps are sealed with sealant. Seal any unsealed floor panel to floor panel (vertical) gaps from the
top of the floor panel to the top of the seat track. Seal any unsealed floor panel to seat track interface (horizontal) gaps. Refer to Appendix
A Figure 3 for typical locations of sealant application.
*[5]  For seat track to floor panel gaps already sealed with previously installed tape, or sealant, the addition of fillet sealant is not required.
*[6]  For areas of already existing sealant that are deteriorated or damaged, remove affected sealant area and reseal using sealant ensuring
no gaps and overlaps with existing sealant. Refer to SOPM 20-30-03 as an accepted procedure.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 33 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 34

Task 6 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE
BARRIER TAPE [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 2.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 34 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 35 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
D
LBL
LBL  LBL  19 LBL  11  RBL 19  RBL  RBL  66
66  39.5  11
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19409-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 35 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 36

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]-BMS8-346, TYPE 1,
CLASS 1, 1 INCH
MOISTURE BARRIER
TAPE
Apply1
*[1]  If moisture barrier tape is missing, Install minimum 1 inch wide moisture barrier tape over seat track holes for the entire length of the
applicable seat track length.
*[2]  Do not apply moisture barrier tape underneath any seat track mounted fitting locations.
*[3]  If moisture barrier tape is damaged or deteriorated, then splice a new piece of tape at the affected area with overlap of 0.5 inch or
more with existing tape, with a maximum of two layers at any location. Make sure that there is no tape overlap over a seat track hole.
Refer to Appendix A Figure 4 as an accepted procedure.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 36 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 37

Task 7 – STA 338 PASSENGER CABIN FLOOR SEAT TRACK DETAILED
INSPECTION [Group 3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 3.
STA 338 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 37 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 38 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
338
STA  _ STA
338  338
LBL  LBL  RBL
86.5  66  PASSENGER FLOOR SEALING ZONE  RBL  66  86.5  3043858
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19410-A-01-1
Figure 1
STA 338 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 38 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 39 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
336.5
STA
338
LBL
66
LBL
86.5
RBL
66
DETAILED INSPECTION  86.5  RBL  3043859
ICN-B787-A-000061-A-81205-19411-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 39 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 40

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]--SEAT TRACKSInspect1
*[1]  Do a detailed inspection of sealant in gaps between seat track and floor panels and in vertical gaps at adjacent floor panel breaks for
any missing, damaged, or deteriorated sealant.
*[2]  Do a detailed inspection of tape dam installed at the end of the seat track for missing, damaged or deteriorated tape dam. Refer to
Appendix A Figure 5.
*[3]  Tape dam is not installed under seat fittings. Gaps at this location are acceptable.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 40 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 41

Task 8 – STA 338 PASSENGER CABIN FLOOR SEAT TRACK SEALANT
APPLICATION [Group 3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 3.
STA 338 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 41 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 42 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
338
STA  _ STA
338  338
LBL  LBL  RBL
86.5  66  PASSENGER FLOOR SEALING ZONE  RBL  66  86.5  3043948
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19412-A-01-1
Figure 1
STA 338 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 42 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 43 (OCR)

_BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
336.5
STA
338
LBL
66
LBL
86.5
co c
RBL
66
86.5  RBL  3043950
ICN-B787-A-000061-A-81205-19413-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 43 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 44

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]*[4]-BAC 5010, TYPE 60
(RTV102)
SEALANTApply1
*[1]  Apply fillet seal between the seat track and floor panels from STA 338 to the end of seat track, to completely seal the gap between
seat track and floor panels. Refer to Appendix A Figure 1, SOPM 20-50-12 and SOPM 20-50-19 as an accepted procedure.
*[2]  Make sure the fillet seal completely fills the gap between the seat track and the floor panel.
*[3]  At the end of seat tracks, verify all vertical gaps are sealed with sealant. Seal any unsealed floor panel to floor panel (vertical) gaps
from the top of the floor panel to the top of the seat track. Refer to Appendix A Figure 3 as an accepted procedure.
*[4]  For seat track to floor panel gaps already sealed with previously installed tape or sealant, the addition of fillet sealant is not required.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 44 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 45

Task 9 – STA 338 PASSENGER CABIN FLOOR SEAT TRACK TAPE DAM
APPLICATION [Group 3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 3.
STA 338 PASSENGER CABIN FLOOR SEAT TRACK TAPE DAM APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 45 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 46 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
338
STA  _ STA
338  338
LBL  LBL  RBL
86.5  66  PASSENGER FLOOR SEALING ZONE  RBL  66  86.5  3043949
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19414-A-01-1
Figure 1
STA 338 PASSENGER CABIN FLOOR SEAT TRACK TAPE DAM APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 46 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 47 (OCR)

_BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
336.5
STA
338
LBL
66
LBL
86.5
co c
RBL
66
RBL
86.5  3043951
ICN-B787-A-000061-A-81205-19415-A-01-1
Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 47 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 48

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]-BMS8-346, TYPE 1,
CLASS 1
TAPE DAMApply1
*[1]  Apply tape dam using BMS 8-346 type 1 class 1. Refer to Appendix A Figure 5 as an accepted procedure.
*[2]  Do not apply tape dam underneath any seat track mounted fitting locations.
*[3]  If a splice is necessary, the tape overlap must be more than 0.5 inch with a maximum of two layers.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 48 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 49

Task 10 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED
INSPECTION [Group 3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 3.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 49 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 50 (OCR)

Q BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
LBL
19 LBL  RBL  RBL
LBL  LBL  11  RBL 19  66
66  39.5  11
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
DETAILED INSPECTION  (VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19416-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 50 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 51

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]--SEAT TRACKSInspect1
*[1]  From STA 1209 to the end of seat track, do a detailed inspection for missing, damaged, or deteriorated sealant between the seat track
and floor panels as well as in the vertical gaps at the adjacent floor panels. Refer to Appendix A Figures 1 and 2.
*[2]  From STA 1209 to the end of seat track, do a detailed inspection of moisture barrier tape over seat track for any damage or if it is
missing. Moisture barrier tape missing sections due to installation of mount fittings into the seat track are acceptable. Refer to Appendix
A Figure 4.
*[3]  At seat track ends, do a detailed inspection for missing, damaged or deteriorated sealant in the vertical gaps of the floor panels and
the horizontal gap of the seat track to floor panel interface. Refer to Appendix A Figure 3.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 51 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 52

Task 11 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT
APPLICATION [Group 3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 3.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK SEALANT APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 52 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 53 (OCR)

@ BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
D
LBL
LBL  66  39.5  19 LBL  RBL 19  11  RBL  39.5  RBL  RBL  66
STA
1209
END OF
EXPOSED
SEAT
TRACKS
*0*
PASSENGER FLOOR SEALING ZONE
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19417-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 53 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 54

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]*[4]*[5]*[6]-BAC 5010, TYPE 60
(RTV102)
SEALANTApply1
*[1]  Apply fillet seal between the seat track and floor panels from STA 1209 to the end of seat track, to completely seal the gap between
seat track and floor panels. Refer to Appendix A Figure 1, SOPM 20-50-12 and SOPM 20-50-19 as an accepted procedure.
*[2]  Make sure the fillet seal completely fills the gap between the seat track and the floor panel.
*[3]  Seal all gaps between two adjacent floor panels from the top of the floor panel to the top of the seat track. Refer to Appendix A Figure
2 as an accepted procedure.
*[4]  At the end of seat tracks, verify all gaps are sealed with sealant. Seal any unsealed floor panel to floor panel (vertical) gaps from the
top of the floor panel to the top of the seat track. Seal any unsealed floor panel to seat track interface (horizontal) gaps. Refer to Appendix
A Figure 3 for typical locations of sealant application.
*[5]  For seat track to floor panel gaps already sealed with previously installed tape or sealant, the addition of fillet sealant is not required.
*[6]  For areas of already existing sealant that are deteriorated or damaged, remove affected sealant area and reseal using sealant ensuring
no gaps and overlaps with existing sealant. Refer to SOPM 20-30-03 as an accepted procedure.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 54 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 55

Task 12 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE
BARRIER TAPE APPLICATION [Group 3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 3.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK MOISTURE BARRIER TAPE APPLICATION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 55 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 56 (OCR)

Q BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
LBL  66  39.5  LBL  19 LE1  LBL  RBL 19  11  RBL  RBL  66
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
(VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19418-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 56 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 57

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]-BMS8-346, TYPE 1,
CLASS 1, 1 INCH
MOISTURE BARRIER
TAPE
Apply1
*[1]  If moisture barrier tape is missing, install minimum 1 inch wide moisture barrier tape over seat track holes for the entire length of the
applicable seat track length.
*[2]  Do not apply moisture barrier tape underneath any seat track mounted fitting locations.
*[3]  If moisture barrier tape is damaged or deteriorated, then splice a new piece of tape with overlap of 0.5 inch or more with existing tape,
with a maximum of two layers at any location. Make sure that there is no tape overlap over a seat track hole. Refer to Appendix A
Figure 4 as an accepted procedure.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 57 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 58

Task 13 – STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED
INSPECTION [Group 4: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 4.
STA 1209 PASSENGER CABIN FLOOR SEAT TRACK DETAILED INSPECTION
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 58 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 59 (OCR)

_BOEING  B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN
STA
1209
D
LBL  RBL  RBL
LBL  66  LBL  19 LBL  11  RBL 19  11  39.5  RBL  66
39.5
STA
1209
END OF
EXPOSED
SEAT
TRACKS
PASSENGER FLOOR SEALING ZONE
DETAILED INSPECTION  (VIEW LOOKING DOWN)
(TYPICAL)
ICN-B787-A-000061-A-81205-19419-A-01-1
Figure 1
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 59 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 60

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]*[3]--SEAT TRACKSInspect1
*[1]  From STA 1209 to the end of seat track, do a detailed inspection for missing, damaged, or deteriorated sealant between the seat track
and floor panels as well as in the vertical gaps at the adjacent floor panels. Refer to Appendix A Figures 1 and 2.
*[2]  From STA 1209 to the end of seat track, do a detailed inspection for any missing, damaged or deteriorated mositure barrier tape.
Refer to Appendix A Figure 4.
*[3]  At seat track ends, do a detailed inspection for missing, damaged or deteriorated sealant in the vertical gaps of the floor panels and
the horizontal gap of the seat track to floor panel interface. Refer to Appendix A Figure3.
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
Page 60 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530085-00 RB
Issue 001, 06 Mar 2024 12:00:00 AM
REQUIREMENTS BULLETIN

The text continues at https://openairdocs.org/service-documents/boeing/b787-81205-sb530085-00-rb/file/9eeeb6da6de8.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
