# Boeing Alert Requirements Bulletin B787-81205-SB530086-00 RB

## Copies (3)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 001, part 1 of 3 ("787-53A0086 RB Issue 001_Part1"), 57 pages: PDF https://openairdocs.org/files/sha256/c0/f6/c0f6ae638c9a5f670e258ae6bae02778a10d7b795a400429bda46a578923792e; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530086-00-rb/file/c0f6ae638c9a.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001, part 2 of 3 ("787-53A0086 RB Issue 001_Part2"), 43 pages: PDF https://openairdocs.org/files/sha256/05/a7/05a78812d20d2548e9455d6b171387c20b68a90a08e21896b18e9ff791eb76f9; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530086-00-rb/file/05a78812d20d.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001, part 3 of 3 ("787-53A0086 RB Issue 001_Part3"), 19 pages: PDF https://openairdocs.org/files/sha256/4d/85/4d853e416794c8e44265f3d304b3abb493e1504bc1e2e871165dde927e5645a8; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530086-00-rb/file/4d853e416794.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530086-00 RB
- Latest revision known: B787-81205-SB530086-00 RB, Issue 001, dated October 18, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530086-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-11-05](https://openairdocs.org/ad/2025-11-05.md), effective Jul 8, 2025: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530086-00-rb/proposed.md).

## Text (57 pages)

Revision 001, part 1 of 3, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0005; AD 2025-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB530086-00 RB FUSELAGE -
Section 46 - Seat Track Splice Fittings Inspection and Replacement
Copyright © 2024 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 1 of 119
Export Controlled ECCN: 9E991
See page 1 for details
4.0
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TASK 1 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 1-2] . . . . . . . . . . . . 14
TASK 2 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 3] . . . . . . . . . . . . . 20
TASK 3 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 4] . . . . . . . . . . . . . 25
TASK 4 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 5] . . . . . . . . . . . . . 30
TASK 5 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group 6] . . . . . . . . . . . . . 35
TASK 6 – STA 1437 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1] . . . . . . . . 40
TASK 7 – STA 1437 BL 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1] . . . . . . . . 47
TASK 8 – STA 1437 BL 66, 19 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1] . . . . . . . 53
TASK 9 – STA 1437 BL 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1] . . . . . . . . . 58
TASK 10 – STA 1605 BL 102.5, 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1-3, 5] . 64
TASK 11 – STA 1605 BL 66, 19, 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 1-4] . . . 69
TASK 12 – STA 1437 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2] . . . . . . . 74
TASK 13 – STA 1437 BL 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2] . . . . . . . . 81
TASK 14 – STA 1437 BL 66, 19 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2] . . . . . . 86
TASK 15 – STA 1437 BL 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 2] . . . . . . . . . 91
TASK 16 – STA 1401+36 BL 102.5, 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 3, 5] . 96
TASK 17 – STA 1401+36 BL 66, 19, 11 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 3-4] . 101
TASK 18 – STA 1401+36 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 4, 6] . . . 106
TASK 19 – STA 1605 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT [Group 4, 6] . . . . . 111
Appendix A – PROCEDURE FOR X-RAY FLUORESCENCE SPECTROMETER INSPECTION [Group 1-6]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 2 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 408-687 in 6 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability
means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
The Variable Numbers and Group information for the applicable airplanes is given below. Refer
to CN-AA94711A for data about this change.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes installed with section 46 seat track splice fittings that
are possibly commercially pure unalloyed titanium that have a buss
bar installed.
-1
787-8 Airplanes installed with section 46 seat track splice fittings that
are possibly commercially pure unalloyed titanium that do not have a
buss bar installed.
-2
787-9 Airplanes installed with section 46 seat track splice fittings that
are possibly commercially pure unalloyed titanium at 20 locations.
-3
787-9 Airplanes installed with section 46 seat track splice fittings that
are possibly commercially pure unalloyed titanium at 16 locations.
-4
787-10 Airplanes installed with section 46 seat track splice fittings that
are possibly commercially pure unalloyed titanium at 8 locations.
-5
787-10 Airplanes installed with section 46 seat track splice fittings that
are possibly commercially pure unalloyed titanium at 4 locations.
-6
Airplane Models: 787-10, 787-8, 787-9
Table 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 3 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZA144
1ZA154 - ZA156
1ZA203 - ZA204
1ZA251 - ZA252
2ZA253 - ZA256
2ZA276 - ZA277
2ZA449
2ZA458
1ZA487 - ZA489
1ZA672 - ZA675
2ZA676
1ZA696 - ZA697
2ZA698
1ZA857 - ZA858
2ZA859 - ZA862
1ZA873 - ZA874
1ZA882 - ZA886
2ZA887 - ZA888
1ZA916 - ZA918
2ZA919 - ZA920
4ZB007 - ZB011
4ZB024 - ZB025
3ZB026
4ZB038 - ZB043
GroupVariable Number
4ZB047 - ZB060
4ZB097 - ZB110
4ZB183 - ZB191
3ZB217
3ZB219 - ZB220
4ZB229
4ZB237 - ZB242
3ZB246 - ZB248
4ZB251 - ZB256
3ZB261 - ZB262
4ZB265 - ZB266
4ZB269 - ZB272
4ZB302 - ZB304
3ZB332 - ZB334
4ZB371 - ZB378
4ZB414 - ZB416
3ZB417
4ZB418
3ZB422 - ZB426
3ZB446 - ZB460
4ZB540 - ZB543
4ZB547
4ZB566 - ZB582
4ZB606 - ZB610
GroupVariable Number
4ZB616 - ZB618
4ZB647 - ZB649
4ZB656 - ZB660
3ZB676 - ZB681
4ZB688 - ZB690
3ZB691 - ZB701
4ZB703 - ZB707
4ZB733 - ZB735
4ZB738 - ZB739
4ZB742 - ZB743
4ZB753
4ZB755
4ZB763 - ZB764
3ZB765
4ZB766 - ZB768
4ZB778 - ZB780
4ZB782 - ZB794
4ZB812 - ZB818
4ZB828 - ZB833
4ZB874
4ZB910
6ZC001 - ZC006
5ZC036
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 4 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this
Requirements Bulletin. The Airworthiness Directive will make the compliance tasks and times given in Re-
quirements Bulletin B787-81205-SB530086-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required action, based on the applicable condition in Table 6 in accordance with the Accom-
plishment Instructions.
Table 6  Seat Track Splice Fittings at Station (STA) 1437/1401+36 and 1605 – Inspection:
Boeing Recommended Compli-
ance Time
ActionCondition
Within 30 months after the Issue 001
date of Requirements Bulletin B787-
81205-SB530086 RB.
Do a handheld X-Ray Fluorescence
Spectrometer Inspection or a High
Frequency Eddy Current inspection
of Seat Track Splice Fittings to deter-
mine material.
All Airplanes
-No further action required at that
Seat Track Splice Fitting location.
CONDITION 1: ANY SEAT TRACK
SPLICE FITTING WITH Ti-6Al-4V
ALLOY MATERIAL FOUND.
Before further flight.Replace affected fitting with a new
Seat Track Splice Fitting (Ti-6Al-4V
alloy material).
CONDITION 2: ANY SEAT TRACK
SPLICE FITTING FOUND THAT IS
NOT Ti-6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY CANNOT BE
DETERMINED
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 5 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 6 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
6. Use the approved fastener, process and material substitutions in accordance with SRM
Chapter 51.
7. If the length of any fastener specified in this requirements bulletin does not meet the in-
stallation standards in SRM Chapter 51, then a fastener of the same specification, or an
approved substitute, with a length which meets the installation standards in SRM Chapter
51 may be used. In addition, washers may be installed for fastener grip length in accor-
dance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners
(screws) needed for installation in this requirements bulletin.
8. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
11. The CONDITIONS, ACTIONS and OPTIONS shown apply to each seat track splice fitting
independently.
12. It is recommended that any seat track splice fitting replacement be done one at a time
for each station to minimize mismatch for seat tracks on either side of the seat tracks
splice fitting.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 7 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

(1) Requirements:
Group 1:
Table 1  Seat Track Splice Fittings at Station (STA) 1437 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a handheld X-Ray Fluo-
rescence Spectrometer in-
spection or a High Frequen-
cy Eddy Current inspection
of Seat Track Splice Fit-
tings to determine material.
All Airplanes
-TASK 1
PART 2: CLOSE ACCESS-No further action required
at that Seat Track Splice
Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING
WITH Ti-6Al-4V ALLOY
MATERIAL FOUND.
-TASK 6Replace affected fittings
with new Seat Track Splice
Fittings at affected loca-
tions.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING
FOUND THAT IS NOT Ti-
6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER-
MINED
-TASK 7
-TASK 8
-TASK 9
-TASK 10
-TASK 11
PART 2: CLOSE ACCESS-
Group 2:
Table 2  Seat Track Splice Fittings at Station (STA) 1437 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a handheld X-Ray Fluo-
rescence Spectrometer in-
spection or a High Frequen-
cy Eddy Current inspection
of Seat Track Splice Fit-
tings to determine material.
All Airplanes
-TASK 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 8 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Group 2:
Table 2  Seat Track Splice Fittings at Station (STA) 1437 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2: CLOSE ACCESS-No further action required
at that Seat Track Splice
Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING
WITH Ti-6Al-4V ALLOY
MATERIAL FOUND.
-TASK 12Replace affected fittings
with new Seat Track Splice
Fittings at affected loca-
tions.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING
FOUND THAT IS NOT Ti-
6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER-
MINED
-TASK 13
-TASK 14
-TASK 15
-TASK 10
-TASK 11
PART 2: CLOSE ACCESS-
Group 3:
Table 3  Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a handheld X-Ray Fluo-
rescence Spectrometer in-
spection or a High Frequen-
cy Eddy Current inspection
of Seat Track Splice Fit-
tings to determine material.
All Airplanes
-TASK 2
PART 2: CLOSE ACCESS-No further action required
at that Seat Track Splice
Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING
WITH Ti-6Al-4V ALLOY
MATERIAL FOUND.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 9 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Group 3:
Table 3  Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
-TASK 16Replace affected fittings
with new Seat Track Splice
Fittings at affected loca-
tions.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING
FOUND THAT IS NOT Ti-
6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER-
MINED
-TASK 17
-TASK 10
-TASK 11
PART 2: CLOSE ACCESS-
Group 4:
Table 4  Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a handheld X-Ray Fluo-
rescence Spectrometer in-
spection or a High Frequen-
cy Eddy Current inspection
of Seat Track Splice Fit-
tings to determine material.
All Airplanes
-TASK 3
PART 2: CLOSE ACCESS-No further action required
at that Seat Track Splice
Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING
WITH Ti-6Al-4V ALLOY
MATERIAL FOUND.
-TASK 18Replace affected fittings
with new Seat Track Splice
Fittings at affected loca-
tions.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING
FOUND THAT IS NOT Ti-
6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER-
MINED
-TASK 17
-TASK 11
-TASK 19
PART 2: CLOSE ACCESS-
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 10 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Group 5:
Table 5  Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a handheld X-Ray Fluo-
rescence Spectrometer in-
spection or a High Frequen-
cy Eddy Current inspection
of Seat Track Splice Fit-
tings to determine material.
All Airplanes
-TASK 4
PART 2: CLOSE ACCESS-No further action required
at that Seat Track Splice
Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING
WITH Ti-6Al-4V ALLOY
MATERIAL FOUND.
-TASK 16Replace affected fittings
with new Seat Track Splice
Fittings at affected loca-
tions.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING
FOUND THAT IS NOT Ti-
6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER-
MINED
-TASK 10
PART 2: CLOSE ACCESS-
Group 6:
Table 6  Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a handheld X-Ray Fluo-
rescence Spectrometer in-
spection or a High Frequen-
cy Eddy Current inspection
of Seat Track Splice Fit-
tings to determine material.
All Airplanes
-TASK 5
PART 2: CLOSE ACCESS-No further action required
at that Seat Track Splice
Fitting location.
CONDITION 1: ANY SEAT
TRACK SPLICE FITTING
WITH Ti-6Al-4V ALLOY
MATERIAL FOUND.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 11 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

Group 6:
Table 6  Seat Track Splice Fittings at Station (STA) 1401+36 and 1605 - Inspection:
Refer to the listed proce-
dures in SB B787-81205-
SB530086-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
-TASK 18Replace affected fittings
with new Seat Track Splice
Fittings at affected loca-
tions.
CONDITION 2: ANY SEAT
TRACK SPLICE FITTING
FOUND THAT IS NOT Ti-
6Al-4V ALLOY MATERIAL
OR TITANIUM ALLOY
CANNOT BE DETER-
MINED
-TASK 19
PART 2: CLOSE ACCESS-
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 12 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

Task 1 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group
1-2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 13 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1-2.
LBL  102.5  _BI  1437  STA
66 -
LBL
39.5
RBL
19
STA
1605
'LBL
19
RBL
11
RBL
39.5
RBL
66
RBL
102.5
SECTION 46 FLOOR STRUCTURE
(VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT)
ICN-B787-A-000061-A-81205-19701-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 14 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 15 (OCR)

BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
TYPICAL
TYPICAL
3052854
ICN-B787-A-000061-A-81205-19702-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 15 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 16 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
VIEW LOOKING UP  VIEW LOOKING UP
(TYPICAL)  (TYPICAL)
A-A  B-B
ICN-B787-A-000061-A-81205-19703-A-01-1
Figure 3
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 16 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 17 (OCR)

A BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
TYPICAL
C-C
FWD
ICN-B787-A-000061-A-81205-19704-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 17 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 18

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]8408Z0401-1PIBOX SEAT TRACK
SPLICE
Inspect1
*[1]*[2]12408Z0402-1PIBOX SEAT TRACK
SPLICE
Inspect2
*[1]  Do a handheld X-Ray Fluorescence Spectrometer inspection of the seat track splice fitting to determine the material in accordance
with Appendix A.
*[2]  As an option, do an Eddy Current inspection of the seat track splice fitting to determine the material in accordance with 787 NDT
Manual [Part 6, 51-00-13].
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 18 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19

Task 2 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group
3: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 19 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 20 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 3.
LBL  STA
LBL  102.5  1401+36
LBL 66-
LBL 39.5
11
RBL
19
STA
1605
'LBL
19
A -  ' RBL  RBL  11
*RBL 39.5
66
' RBL
102.5
SECTION 46 FLOOR STRUCTURE
(VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT)
ICN-B787-A-000061-A-81205-19705-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 20 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 21 (OCR)

BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
TYPICAL
TYPICAL
3052856
ICN-B787-A-000061-A-81205-19706-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 21 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 22 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
VIEW LOOKING UP  VIEW LOOKING UP
(TYPICAL)  (TYPICAL)
A-A  B-B
ICN-B787-A-000061-A-81205-19707-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 22 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 23

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]8408Z0401-1PIBOX SEAT TRACK
SPLICE
Inspect1
*[1]*[2]12408Z0402-1PIBOX SEAT TRACK
SPLICE
Inspect2
*[1]  Do a handheld X-Ray Fluorescence Spectrometer inspection of the seat track splice fitting to determine the material in accordance
with Appendix A.
*[2]  As an option, do an Eddy Current inspection of the seat track splice fitting to determine the material in accordance with 787 NDT
Manual [Part 6, 51-00-13].
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 23 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 24

Task 3 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group
4: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 24 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 25 (OCR)

@ BOEING  Issue 001, 18 Oct 2024 12:00:00 AM  B787-81205-SB530086-00 RB
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 4.
LBL  SIA
102.5  1401+36
LBL 66
LBL 39.5
11
RBL
19
STA
1605
' LBL
RBL  19
RBL  11
RBL 39.5
66
RBL
102.5
SECTION 46 FLOOR STRUCTURE
(VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT)
ICN-B787-A-000061-A-81205-19708-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 25 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 26 (OCR)

A BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
FWD
TYPICAL
TYPICAL
B  3052859
ICN-B787-A-000061-A-81205-19709-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 26 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 27 (OCR)

A BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
VIEW LOOKING UP  VIEW LOOKING UP
(TYPICAL)  (TYPICAL)  3058608
A-A  B-B
ICN-B787-A-000061-A-81205-19710-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 27 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 28

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]4PIBOX SEAT TRACK
SPLICE
408Z0401-1Inspect1
*[1]*[2]12PIBOX SEAT TRACK
SPLICE
408Z0402-1Inspect2
*[1]  Do a handheld X-Ray Fluorescence Spectrometer inspection of the seat track splice fitting to determine the material in accordance
with Appendix A.
*[2]  As an option, do an Eddy Current inspection of the seat track splice fitting to determine the material in accordance with 787 NDT
Manual [Part 6, 51-00-13].
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 28 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 29

Task 4 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group
5: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 29 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 30 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 5.
LBL  STA
102.5  1401+36
LBL
39.5
STA
1605
'RBL
39.5
'RBL
102.5
SECTION 46 FLOOR STRUCTURE
(VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT)
ICN-B787-A-000061-A-81205-19829-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 30 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 31

ICN-B787-A-000061-A-81205-19830-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 31 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 32 (OCR)

@ BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
D
VIEW LOOKING UP
(TYPICAL)  3058609
A-A
ICN-B787-A-000061-A-81205-19831-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 32 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 33

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]8408Z0401-1PIBOX SEAT TRACK
SPLICE
Inspect1
*[1]  Do a handheld X-Ray Fluorescence Spectrometer inspection of the seat track splice fitting to determine the material in accordance
with Appendix A.
*[2]  As an option, do an Eddy Current inspection of the seat track splice fitting to determine the material in accordance with 787 NDT
Manual [Part 6, 51-00-13].
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 33 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 34

Task 5 – SECTION 46 SEAT TRACK SPLICE FITTING INSPECTION [Group
6: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 34 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 35 (OCR)

@ BOEING  Issue 001, 18 Oct 2024 12:00:00 AM  B787-81205-SB530086-00 RB
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 6.
LBL  STA
102.5  1401+36
STA
1605
RBL
102.5
SECTION 46 FLOOR STRUCTURI
VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT
ICN-B787-A-000061-A-81205-19832-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 35 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 36

ICN-B787-A-000061-A-81205-19833-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 36 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 37 (OCR)

@ BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
VIEW LOOKING UP
(TYPICAL)  3058610
A-A
ICN-B787-A-000061-A-81205-19834-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 37 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 38

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]4408Z0401-1PIBOX SEAT TRACK
SPLICE
Inspect1
*[1]  Do a handheld X-Ray Fluorescence Spectrometer inspection of the seat track splice fitting to determine the material in accordance
with Appendix A.
*[2]  As an option, do a High Frequency Eddy Current inspection of the seat track splice fitting to determine the material in accordance with
787 NDT Manual [Part 6, 51-00-13].
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 38 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 39

Task 6 – STA 1437 BL 102.5 SEAT TRACK SPLICE FITTING REPLACEMENT
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 39 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 40 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
102.5  LBL  1437  STA
RBL
102.5
SECTION 46 FLOOR STRUCTURE
(VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT)
ICN-B787-A-000061-A-81205-19835-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 40 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 41 (OCR)

@BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
TYPICAL
8 LOCATIONS 1T)
A-A
ICN-B787-A-000061-A-81205-19836-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 41 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 42 (OCR)

A BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
10 LOCATIONS 1D9
-WD
B-B
0.005
MAXIMUM
TYPICAL
ICN-B787-A-000061-A-81205-19837-A-01-1
Figure 3
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 42 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 43 (OCR)

@ BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1.02
0.98
4/8\12  8 12
1.02
0.98
INBD
VIEW LOOKING UP
(TYPICAL)  3063069
C-C
ICN-B787-A-000061-A-81205-19838-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 43 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 44

Table 1  
More DataQtyIdentificationNameActionStep
-18BACB30VT10K4BOLTRemove1
-18BACW10EG10CKWASHERRemove
-18BACC30BS10KCOLLARRemove
-2BACB30VT10K5BOLTRemove2
-2BACW10BP5ACUWASHERRemove
-1465Z2191-27BUSS BARRemove
-2BACC30BS10SCOLLARRemove
-2BACW10BP5APUWASHERRemove
-1408Z0401-1PIBOX SEAT TRACK
SPLICE
Remove3
-2BACR15FR4MP6RRIVET, BLINDRemove4
*[1]1466Z7251-369WIRING BRACKETRemove / Keep
*[1]1466Z7251-373WIRING BRACKETRemove / Keep
*[2]3BACB30NX5HK6BOLT, HEX DRIVERemove5
*[2]3BACC30AB5ACOLLAR, SHEARRemove
*[2]3BACW10EG5CKWASHER, CSKRemove
*[2]1466Z7251-373WIRING BRACKETRemove / Keep
*[3]*[4]*[5]1408Z0401-1PIBOX SEAT TRACK
SPLICE
Locate6
*[6]20--Drill7
*[7]2--Drill8
*[8]1408Z0401-1PIBOX SEAT TRACK
SPLICE
Install (New)9
*[9]*[10]18BACW10EG10CKWASHERInstall (New)
*[9]*[11]18BACB30VT10K4BOLTInstall (New)
*[9]18BACC30BS10KCOLLARInstall (New)
*[12]--SEALANTApply10
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 44 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 45

Table 1  
More DataQtyIdentificationNameActionStep
*[12]1465Z2191-27BUSS BARInstall (New)11
*[9]2BACW10BP5ACUWASHERInstall (New)
*[9]2BACW10BP5APUWASHERInstall (New)
*[9]*[11]2BACB30VT10K5BOLTInstall (New)
*[9]2BACC30BS10SCOLLARInstall (New)
*[13]1466Z7251-369WIRING BRACKETInstall (Kept)12
*[14]*[15]2BACR15FR4MP6RRIVET, BLINDInstall (New)
*[2]*[16]1466Z7251-373WIRING BRACKETInstall (Kept)13
*[2]*[17]*[18]*[19]*[20]3BACW10EG5CKWASHER, CSKInstall (New)
*[2]*[17]*[18]*[19]*[20]3BACB30NX5HK6BOLT, HEX DRIVEInstall (New)
*[2]*[17]*[18]*[19]*[20]3BACC30AB5ACOLLAR, SHEARInstall (New)
*[1]  This part can be removed with the connected aluminum wiring bracket (466Z7251-373).
*[2]  This step is only required if the kept wiring bracket (466Z7251-369) cannot be installed.
*[3]  Use existing seat track holes to locate seat track splice fitting.
*[4]  Maximum misalignment between forward and aft seat tracks after installation is 0.005 inch.
*[5]  No shimming is allowed between seat track splice fitting and vertical leg of seat track.
*[6]  Match drill seat track splice fitting to seat track holes. Break sharp edges. Diameter 0.316 - 0.312 inch. Refer to SOPM 20-10-07 as
an accepted procedure.
*[7]  Align forward and aft ends of new seat track splice with forward and aft ends of removed seat track splice and match drill wiring
bracket rivet holes. Diameter 0.143 - 0.146 inch. Refer to SOPM 20-10-07 as an accepted procedure.
*[8]  Fay seal seat track splice to seat tracks category 1. Refer to SWPM 20-20-00 as an accepted procedure.
*[9]  Refer to SOPM 20-50-01 as an accepted procedure.
*[10]  Install washer under bolt head.
*[11]  Install fastener with head on far side.
*[12]  Fay seal buss bar to seat track category 2 using BMS 5-45. Refer to SWPM 20-20-00 as an accepted procedure.
*[13]  If the kept part cannot be installed, install a new part.
*[14]  Drill holes for rivet installation. Diameter 0.143 - 0.146 inch. Refer to SOPM 20-50-18 as an accepted procedure.
*[15]  Refer to 787-8 SRM 51-43-06 as an accepted procedure.
*[16]  Apply sealant BMS 5-45 to faying surfaces. Refer to SOPM 20-50-19 as an accepted procedure.
*[17]  Apply chemical conversion coating to any bared aluminum surfaces. Refer to SOPM 20-43-03 Type 2 as an accepted procedure.
*[18]  Clean and reactivate primer on areas to be painted. Refer to SOPM 20-41-02 as an accepted procedure.
*[19]  Apply one coat of BMS 10-11 Type 1, yellow primer to fastener heads, collars, scratches and bared surfaces. Refer to SOPM 20-41-
02 as an accepted procedure.
*[20]  Wet install fasteners with BMS 5-45. Refer to SOPM 20-50-19 and 787-8 SRM 51-43-05 as an accepted procedure.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 45 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 46

Task 7 – STA 1437 BL 39.5 SEAT TRACK SPLICE FITTING REPLACEMENT
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 46 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 47 (OCR)

Q BOEING  Issue 001, 18 Oct 2024 12:00:00 AM  B787-81205-SB530086-00 RB
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1437
LBL
39.5
RBL
39.5
SECTION 46 FLOOR STRUCTURI
VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT
ICN-B787-A-000061-A-81205-19839-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 47 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 48 (OCR)

@ BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
0.005 INCH
MAXIMUM
Vano
TYPICAL  TYPICAL
A-A  8 LOCATIONS 15)€
FWD
5/6 10 LOCATIONS  B-B
ICN-B787-A-000061-A-81205-19840-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 48 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 49 (OCR)

@ BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1.02
0.98
1.02
0.98
VIEW LOOKING UP
(TYPICAL)  3053127
C-C
ICN-B787-A-000061-A-81205-19841-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 49 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 50

Table 1  
More DataQtyIdentificationNameActionStep
-18BACB30VT10K4BOLTRemove1
-18BACW10EG10CKWASHERRemove
-18BACC30BS10KCOLLARRemove
-2BACB30VT10K6BOLTRemove2
-2BACW10BP5ACUWASHERRemove
-1465Z2191-27BUSS BARRemove
-2BACC30BS10SCOLLARRemove
-2BACW10BP5APUWASHERRemove
1408Z0401-1PIBOX SEAT TRACK
SPLICE
Remove3
*[1]*[2]*[3]1408Z0401-1PIBOX SEAT TRACK
SPLICE
Locate4
*[4]20--Drill5
*[5]1408Z0401-1PIBOX SEAT TRACK
SPLICE
Install (New)6
*[6]*[7]18BACW10EG10CKWASHERInstall (New)
*[6]*[8]18BACB30VT10K4BOLTInstall (New)
*[6]18BACC30BS10KCOLLARInstall (New)
*[9]--SEALANTApply7
*[9]*[10]1465Z2191-27BUSS BARInstall (New)8
*[6]2BACW10BP5ACUWASHERInstall (New)
*[6]2BACW10BP5APUWASHERInstall (New)
*[6]*[8]2BACB30VT10K6BOLTInstall (New)
*[6]2BACC30BS10SCOLLARInstall (New)
*[1]  Use existing seat track holes to locate seat track splice fitting.
*[2]  Maximum misalignment between forward and aft seat tracks after installation is 0.005 inch.
*[3]  No shimming is allowed between seat track splice fitting and vertical leg of seat track.
*[4]  Match drill seat track splice fitting to seat track holes. Break sharp edges. Diameter 0.316 - 0.312 inch. Refer to SOPM 20-10-07 as
an accepted procedure.
*[5]  Fay seal seat track splice to seat tracks category 1. Refer to SWPM 20-20-00 as an accepted procedure.
*[6]  Refer to SOPM 20-50-01 as an accepted procedure.
*[7]  Install washer under bolt head.
*[8]  Install fastener with head on far side.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 50 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 51

Table 1  
*[9]  Fay seal buss bar to seat track category 2 using BMS 5-45. Refer to SWPM 20-20-00 as an accepted procedure.
*[10]  On the left side fastener, only If required, install shim between buss bar and seat track for gaps between 0.005 up to 0.020 inch. Refer
to SOPM 20-50-20 as an accepted procedure.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 51 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 52

Task 8 – STA 1437 BL 66, 19 SEAT TRACK SPLICE FITTING REPLACEMENT
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 52 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 53 (OCR)

Q BOEING  Issue 001, 18 Oct 2024 12:00:00 AM  B787-81205-SB530086-00 RB
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1437
'RBL
19
RBL
66
SECTION 46 FLOOR STRUCTURE
(VIEW LOOKING UP FROM INSIDE AFT CARGO COMPARTMENT
ICN-B787-A-000061-A-81205-19842-A-01-1
Figure 1
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 53 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 54 (OCR)

Q BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
0.005 INCH
MAXIMUM
Vang
TYPICAL  TYPICAL
A-A  8 LOCATIONS 1€ €
-WD
5/6 10 LOCATIONS  B-B
ICN-B787-A-000061-A-81205-19843-A-01-1
Figure 2
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 54 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 55 (OCR)

@ BOEING  B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN
1.02  000
0.98
1.02
0.98
VIEW LOOKING UP
(TYPICAL)  3053392
C-C
ICN-B787-A-000061-A-81205-19844-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 55 of 119
Export Controlled ECCN: 9E991
See page 1 for details

### Page 56

Table 1  
More DataQtyIdentificationNameActionStep
-18BACB30VT10K4BOLTRemove1
-18BACW10EG10CKWASHERRemove
-18BACC30BS10KCOLLARRemove
-2BACB30VT10K6BOLTRemove2
-1465Z2191-27BUSS BARRemove
-2BACW10BP5ACUWASHERRemove
-2BACC30BS10SCOLLARRemove
-2BACW10BP5APUWASHERRemove
-1408Z0402-1PIBOX SEAT TRACK
SPLICE
Remove3
*[1]*[2]*[3]1408Z0402-1PIBOX SEAT TRACK
SPLICE
Locate4
*[4]20--Drill5
*[5]1408Z0402-1PIBOX SEAT TRACK
SPLICE
Install (New)6
*[6]*[7]18BACW10EG10CKWASHERInstall (New)
*[6]*[8]18BACB30VT10K4BOLTInstall (New)
*[6]18BACC30BS10KCOLLARInstall (New)
*[6]2BACW10BP5ACUWASHERInstall (New)7
*[6]2BACW10BP5APUWASHERInstall (New)
-1465Z2191-27BUSS BARInstall (New)
*[6]*[8]2BACB30VT10K6BOLTInstall (New)
*[6]2BACC30BS10SCOLLARInstall (New)
*[1]  Use existing seat track holes to locate seat track splice fitting.
*[2]  Maximum misalignment between forward and aft seat tracks after installation is 0.005 inch.
*[3]  No shimming is allowed between seat track splice fitting and vertical leg of seat track.
*[4]  Match drill seat track splice fitting to seat track holes. Break sharp edges. Diameter 0.316 - 0.312 inch. Refer to SOPM 20-10-07 as
an accepted procedure.
*[5]  Fay seal seat track splice to seat tracks category 1. Refer to SWPM 20-20-00 as an accepted procedure.
*[6]  Refer to SOPM 20-50-01 as an accepted procedure.
*[7]  Install washer under bolt head.
*[8]  Install fastener with head on far side.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 56 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 57

Task 9 – STA 1437 BL 11 SEAT TRACK SPLICE FITTING REPLACEMENT
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
Page 57 of 119
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530086-00 RB
Issue 001, 18 Oct 2024 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
