# Boeing Alert Requirements Bulletin B787-81205-SB530089-00 RB

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 001, part 1 of 2 ("B787-81205-SB530089-00 RB_001__Part1"), 42 pages: PDF https://openairdocs.org/files/sha256/99/b6/99b670e25de0c31ddbc9ab59f52947798d8bf0b990983a2a516bd618f55c59b1; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530089-00-rb/file/99b670e25de0.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1110; AD 2026-01-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001, part 2 of 2 ("B787-81205-SB530089-00 RB_001__Part2"), 31 pages: PDF https://openairdocs.org/files/sha256/15/79/15795c3aafcfee5400b9c1e11e46504a8fdd70a8aea8910fb5326c6338fd9f61; text https://openairdocs.org/service-documents/boeing/b787-81205-sb530089-00-rb/file/15795c3aafcf.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1110; AD 2026-01-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB530089-00 RB
- Latest revision known: B787-81205-SB530089-00 RB, Issue 001, dated February 7, 2025 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb530089-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-01-06](https://openairdocs.org/ad/2026-01-06.md), effective Feb 20, 2026: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb530089-00-rb/proposed.md).

## Text (42 pages)

Revision 001, part 1 of 2, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1110; AD 2026-01-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB530089-00 RB FUSELAGE -
Section 46 - Cargo Barrier Fitting Links Inspection and Replacement
Copyright © 2025 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 1 of 73
Export Controlled ECCN: 9E991
See page 1 for details
3.0
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TASK 1 – SECTION 46 LEFT AND RIGHT CARGO BARRIER FITTING LINKS INSPECTION [Group 1-3] . 12
TASK 2 – SECTION 46 LEFT CARGO BARRIER FITTING LINK REMOVAL [Group 1] . . . . . . . . . . 16
TASK 3 – SECTION 46 LEFT CARGO BARRIER FITTING LINK INSTALLATION [Group 1] . . . . . . . 20
TASK 4 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK REMOVAL [Group 1] . . . . . . . . . 25
TASK 5 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK INSTALLATION [Group 1] . . . . . . 29
TASK 6 – SECTION 46 LEFT CARGO BARRIER FITTING LINK REMOVAL [Group 2] . . . . . . . . . . 34
TASK 7 – SECTION 46 LEFT CARGO BARRIER FITTING LINK INSTALLATION [Group 2] . . . . . . . 38
TASK 8 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK REMOVAL [Group 2] . . . . . . . . . 43
TASK 9 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK INSTALLATION [Group 2] . . . . . . 47
TASK 10 – SECTION 46 LEFT CARGO BARRIER FITTING LINK REMOVAL [Group 3] . . . . . . . . . 52
TASK 11 – SECTION 46 LEFT CARGO BARRIER FITTING LINK INSTALLATION [Group 3] . . . . . . . 56
TASK 12 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK REMOVAL [Group 3] . . . . . . . . . 61
TASK 13 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK INSTALLATION [Group 3] . . . . . . 65
Appendix A – PROCEDURE FOR X-RAY FLUORESCENCE SPECTROMETER INSPECTION [Group 1-3]
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 2 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-9, 787-10 Airplane(s), line number(s) 451-456, 458-459, 461-469,
471-473, 475, 477-481, 483-488, 490-494, 496-498, 500-504, 507, 509-510, 512, 514-518, 520-
521, 523-531, 533-534, 536-539, 541-545, 547-551, 553-556, 558, 560-567, 569-572, 574-578,
580-582, 584-591, 593-594, 596-598, 600-608, 610-617, 619-624, 626, 628-651, 653-659, 661-
687, 689-700 in 3 Group(s). Where the effectivity is presented with hyphens between line numbers,
the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers
1 through 9 inclusive.
The variable Numbers and Group information for the applicable airplanes is given below.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-9 Airplanes installed with cargo barrier fitting links that are possibly
commercially pure unalloyed titanium.
-1
787-10 Airplanes installed with cargo barrier fitting links that are pos-
sibly commercially pure unalloyed titanium.
-2
787-9 Airplane with cargo barrier fitting links that are possibly commer-
cially pure unalloyed titanium installed with oversized fasteners.
-3
Airplane Models: 787-10, 787-9
Table 2
GroupVariable Number
1ZB007 - ZB011
1ZB025 - ZB026
1ZB040 - ZB043
1ZB050 - ZB060
1ZB099 - ZB101
GroupVariable Number
3ZB102
1ZB103 - ZB111
1ZB133 - ZB134
1ZB185 - ZB191
1ZB217
GroupVariable Number
1ZB219 - ZB220
1ZB229
1ZB239 - ZB242
1ZB246 - ZB248
1ZB251 - ZB258
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 3 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZB261 - ZB262
1ZB265 - ZB266
1ZB269 - ZB272
1ZB303 - ZB304
1ZB332 - ZB334
1ZB373 - ZB379
1ZB417 - ZB418
1ZB422 - ZB427
1ZB446 - ZB460
1ZB541 - ZB543
1ZB547
1ZB571 - ZB583
GroupVariable Number
1ZB607 - ZB610
1ZB618
1ZB649
1ZB656 - ZB660
1ZB676 - ZB681
1ZB688 - ZB701
1ZB703 - ZB707
1ZB733 - ZB735
1ZB738 - ZB739
1ZB742 - ZB743
1ZB753
1ZB755 - ZB756
GroupVariable Number
1ZB764 - ZB768
1ZB779 - ZB780
1ZB783 - ZB794
1ZB812 - ZB818
1ZB828 - ZB833
1ZB858
1ZB874
1ZB910 - ZB911
2ZC001 - ZC007
2ZC036
--
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB530089 RB. The Airworthiness Directive will make the compliance tasks
and times given in Requirements Bulletin B787-81205-SB530089 RB mandatory.
Accomplish the required action, based on the applicable condition in Table 5 in accordance with the Accom-
plishment Instructions
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 4 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

Table 5  Cargo Barrier Fitting Links at Station (STA) 1292, Left and Right Buttock Line (LBL and RBL) 19 – Inspection
 and Replacement:
Boeing Recommended Compli-
ance Time
ActionCondition
Within 48 months after the Issue 001
date of Requirements Bulletin B787-
81205-SB530089 RB.
Do a High Frequency Eddy Current
(HFEC) or handheld XRF Spectrom-
eter Inspection of Cargo Barrier Fit-
ting Link to determine titanium alloy
material.
All Airplanes
-No further action required at that
Cargo Barrier Fitting Link location.
CONDITION 1: ANY CARGO BAR-
RIER FITTING LINK FOUND THAT
IS Ti-6Al-4V ALLOY MATERIAL.
Before further flight.Replace affected fitting link with a
new Cargo Barrier Fitting Link (Ti-
6Al-4V alloy material).
CONDITION 2: ANY CARGO BAR-
RIER FITTING LINK FOUND THAT
IS NOT Ti-6Al-4V ALLOY MATERI-
AL OR TITANIUM ALLOY CANNOT
BE DETERMINED.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 5 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATE-
RIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN
CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.CAUTION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 6 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
6. Use the approved fastener, process and material substitutions in accordance with SRM
Chapter 51.
7. If the length of any fastener specified in this requirements bulletin does not meet the in-
stallation standards in SRM Chapter 51, then a fastener of the same specification, or an
approved substitute, with a length which meets the installation standards in SRM Chapter
51 may be used. In addition, washers may be installed for fastener grip length in accor-
dance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners
(screws) needed for installation in this requirements bulletin.
8. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
10. The CONDITIONS, ACTIONS and OPTIONS shown apply to each Cargo Barrier Fitting
Link independently.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements:
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 7 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

Group 1:
Table 1  Cargo Barrier Fitting Links at Station (STA) 1292, Left and Right Buttock Link (LBL and RBL) 19 - Inspection
 and Replacement:
Refer to the listed proce-
dures in SB B787-81205-
SB530089-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a High Frequency Eddy
Current (HFEC) or hand-
held XRF Spectrometer
Inspection of Cargo Barrier
Fitting Link to determine ti-
tanium alloy material.
All Airplanes
-Task 1
PART 2: CLOSE ACCESS-No further action required
at that Cargo Barrier Fitting
Link location.
CONDITION 1: ANY CAR-
GO BARRIER FITTING
LINK FOUND THAT IS Ti-
6Al-4V ALLOY MATERIAL.
-Task 2Replace affected fitting link
with a new Cargo Barrier
Fitting Link (Ti-6Al-4V alloy
material).
CONDITION 2: ANY CAR-
GO BARRIER FITTING
LINK FOUND THAT IS
NOT Ti-6Al-4V ALLOY
MATERIAL OR TITANIUM
ALLOY CANNOT BE DE-
TERMINED
-Task 3
-Task 4
-Task 5
PART 2: CLOSE ACCESS-
Group 2:
Table 2  Cargo Barrier Fitting Links at Station (STA) 1292, Left and Right Buttock Link (LBL and RBL) 19 - Inspection
 and Replacement:
Refer to the listed proce-
dures in SB B787-81205-
SB530089-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a High Frequency Eddy
Current (HFEC) or hand-
held XRF Spectrometer
Inspection of Cargo Barrier
Fitting Link to determine ti-
tanium alloy material.
All Airplanes
-Task 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 8 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Group 2:
Table 2  Cargo Barrier Fitting Links at Station (STA) 1292, Left and Right Buttock Link (LBL and RBL) 19 - Inspection
 and Replacement:
Refer to the listed proce-
dures in SB B787-81205-
SB530089-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2: CLOSE ACCESS-No further action required
at that Cargo Barrier Fitting
Link location.
CONDITION 1: ANY CAR-
GO BARRIER FITTING
LINK FOUND THAT IS Ti-
6Al-4V ALLOY MATERIAL.
-Task 6Replace affected fitting link
with a new Cargo Barrier
Fitting Link (Ti-6Al-4V alloy
material)
CONDITION 2: ANY CAR-
GO BARRIER FITTING
LINK FOUND THAT IS
NOT Ti-6Al-4V ALLOY
MATERIAL OR TITANIUM
ALLOY CANNOT BE DE-
TERMINED
-Task 7
-Task 8
-Task 9
PART 2: CLOSE ACCESS-
Group 3:
Table 3  Cargo Barrier Fitting Links at Station (STA) 1292, Left and Right Buttock Link (LBL and RBL) 19 - Inspection
 and Replacement:
Refer to the listed proce-
dures in SB B787-81205-
SB530089-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a High Frequency Eddy
Current (HFEC) or hand-
held XRF Spectrometer
Inspection of Cargo Barrier
Fitting Link to determine ti-
tanium alloy material.
All Airplanes
-Task 1
PART 2: CLOSE ACCESS-No further action required
at that Cargo Barrier Fitting
Link location.
CONDITION 1: ANY CAR-
GO BARRIER FITTING
LINK FOUND THAT IS Ti-
6Al-4V ALLOY MATERIAL.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 9 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Group 3:
Table 3  Cargo Barrier Fitting Links at Station (STA) 1292, Left and Right Buttock Link (LBL and RBL) 19 - Inspection
 and Replacement:
Refer to the listed proce-
dures in SB B787-81205-
SB530089-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
-Task 10Replace affected fitting link
with a new Cargo Barrier
Fitting Link (Ti-6Al-4V alloy
material)
CONDITION 2: ANY CAR-
GO BARRIER FITTING
LINK FOUND THAT IS
NOT Ti-6Al-4V ALLOY
MATERIAL OR TITANIUM
ALLOY CANNOT BE DE-
TERMINED
-Task 11
-Task 12
-Task 13
PART 2: CLOSE ACCESS-
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 10 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Task 1 – SECTION 46 LEFT AND RIGHT CARGO BARRIER FITTING LINKS
INSPECTION [Group 1-3:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 11 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12 (OCR)

A BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1-3.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20191-A-01-1
Task 1 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 12 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 13 (OCR)

Q BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
LEFT CARGO BARRIER-  ITTING LINK
(CARGO BARRIER WALL PANELS AND S  SUPPORT BEAMS NOT SHOWN FOR CLARITY
RIGHT CARGO BARRIER FITTING LINK
(CARGO BARRIER WALL PANELS AND SUPPORT BEAMS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20192-A-01-1
Task 1 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 13 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 14

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]2464Z5187-169CARGO SUPPORT
FTG LINK
Inspect1
*[1]  Do an X-Ray Fluorescence Spectrometer inspection of the Cargo Barrier Fitting Link to determine the material in accordance with
Appendix A.
*[2]  As an option, do a High Frequency Eddy Current (HFEC) inspection of the Cargo Barrier Fitting Link to determine the material in ac-
cordance with 787 NDT Manual Part 6, 51-00-13.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 14 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

Task 2 – SECTION 46 LEFT CARGO BARRIER FITTING LINK REMOVAL
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 15 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16 (OCR)

A BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20193-A-01-1
Task 2 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 16 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 17 (OCR)

@ BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
1) 4 LOCATIONS
CARGO
BARRIER
SUPPORT
CARGO
BARRIER
STANCHION
LEFT CARGO BARRIER FITTING LINK
(TYPICAL
(CARGO BARRIER WALL PANELS AND SUPPORT
BEAMS NOT SHOWN FOR CLARITY)
B
3062676
ICN-B787-A-000061-A-81205-20194-A-01-1
Task 2 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 17 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 18

Table 1  
More DataQtyIdentificationNameActionStep
-4BACC30CP10KCollarRemove1
-4BACB30YK10K10BoltRemove
-1BACN11Z7CKNutRemove2
-1BACW10BN7KPPlain WasherRemove
-1BACW10BN7KCCSK WasherRemove
-1BACB30MR7A18BoltRemove
-1BACP18BD13A21Straight PinRemove
-1BACP18BC02A06PCotter PinRemove
-2464Z5594-203Vertical BushingRemove / Keep
-1464Z5595-211Pin NutRemove / Keep
-1464Z5595-209Fuse PinRemove / Keep
-2464Z5594-205Sliding BushingRemove / Keep
*[1]1464Z5187-169CARGO SUPPORT
FTG LINK
Remove3
*[1]  Retain any shim(s) for possible reuse.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 18 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19

Task 3 – SECTION 46 LEFT CARGO BARRIER FITTING LINK INSTALLATION
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 19 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 20 (OCR)

A BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
3063464
ICN-B787-A-000061-A-81205-20195-A-01-1
Task 3 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 20 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 21 (OCR)

Q BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
CARGO
BARRIER
SUPPORT
CARGO
•BARRIER
STANCHION
LEFT CARGO BARRIER FITTING LINK
(CARGO BARRIER WALL PANELS AND SUPPORT
BEAMS NOT SHOWN FOR CLARITY)
B
A-A  3062677
ICN-B787-A-000061-A-81205-20196-A-01-1
Task 3 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 21 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 22

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1464Z5187-169CARGO SUPPORT
FTG LINK
Locate1
*[2]4-HOLEDrill2
-4--Deburr
*[3]--SealantApply3
-1464Z5187-169CARGO SUPPORT
FTG LINK
Install (New)4
*[4]*[5]*[6]*[7]*[8]4BACB30YK10K10BOLT, PROTRUDING
TENSION HEAD, HEX
DRIVE, 125 KSI
SHEAR, NICKEL AL-
LOY 718 (NOMINAL
AND OVERSIZE)
Install (New)5
*[6]*[7]*[8]4BACC30CP10KCOLLAR, PRELOAD,
TENSION, 17-4PH
CORROSION RESIS-
TANT STEEL(NOMI-
NAL AND OVERSIZE)
Install (New)
-1464Z5595-209Fuse PinInstall (Kept)6
-2464Z5594-205Sliding BushingInstall (Kept)
-1464Z5595-211Pin NutInstall (Kept)
-1BACP18BD13A21Straight PinInstall (New)
*[9]1BACP18BC02A06PPIN, COTTER (SPLIT)Install (New)
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 22 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 23

Table 1  
More DataQtyIdentificationNameActionStep
-2464Z5594-203Vertical BushingInstall (Kept)7
-1BACW10BN7KPWASHER, PLAIN OR
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL, AL
Install (New)
*[10]*[11]1BACB30MR7A18BOLT, 12 POINT
HEAD, 160 KSI MIN
TENSILE, 95 KSI MIN
SHEAR, 6AL-4V TITA-
NIUM (NOMINAL AND
OVERSIZE)
Install (New)
-1BACN11Z7CKNUT, SELF-LOCKING,
12 POINT, 180 KSI
TENSILE, 450 F AND
900 F
Install (New)
-1BACW10BN7KCCSK WasherInstall (New)
*[1]  Make sure the Cargo Barrier Fitting Link and Cargo Barrier Support interface gap is less than or equal to 0.005 inches. If the gap is
greater than 0.005 inches but less than or equal to .110 inches, shim using BACS40V033E034 or kept shim. Refer to SOPM 20-50-
20 Type II as an accepted procedure. Break any sharp edges to a radius or chamfer of approximately 0.002 inches to 0.010 inches.
*[2]  Match drill holes in new Cargo Barrier Fitting Link for fastener installation, including any new shims. Diameter 0.3125 - 0.3155 inches.
Refer to 787-9 SRM 51-43-01 Rev 28 or later revisions published on MyBoeingFleet and SOPM 20-10-07 as accepted procedures.
The drill template identified in Appendix B of SB B787-81205-SB530089-00 can be used to assist in fastener holes transfer.
*[3]  Apply faying surface seal between mating surfaces of Cargo Barrier Fitting Link and Cargo Barrier Support including both sides of
shims with BMS5-45. Refer to SOPM 20-50-19 as an accepted procedure.
*[4]  Install fastener with BMS5-45 sealant. Refer to SOPM 20-50-19 Method 3 as an accepted procedure.
*[5]  Permanent straight shank fastener installation. Refer to 787-9 SRM 51-43-05 Rev 28 or later revisions published on MyBoeingFleet
as an accepted procedure.
*[6]  Apply chemical conversion coating to any bared aluminum surfaces common to the Cargo Barrier Stanchion and Cargo Barrier Support.
Refer to SOPM 20-43-03 Type II, Class A as an accepted procedure.
*[7]  Clean and reactivate primer on areas to be painted. Refer to SOPM 20-41-02 as an accepted procedure.
*[8]  Apply one coat of BMS10-11 Type 1, yellow primer to fastener heads, collars, scratches and bared surfaces. Refer to SOPM 20-41-
02 as an accepted procedure.
*[9]  Refer to SOPM 20-50-02 as an accepted procedure.
*[10]  Apply a thin coating of BMS3-33 to mating surfaces of bolt and bushings prior to installation, including bolt threads, washers and
bearing face of nut. Use lubed bolt torque range. Refer to 787-9 SRM 51-41-07 Rev 28 as an accepted procedure.
*[11]  Refer to 787-9 SRM 51-41-07 Rev 28 as an accepted procedure.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 23 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 24

Task 4 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK REMOVAL
[Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 24 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 25 (OCR)

BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20197-A-01-1
Task 4 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 25 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 26 (OCR)

_BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
4 LOCATIONS (1)
CARGO
BARRIER
SUPPORT
CARGO
BARRIER
STANCHION
RIGHT CARGO BARRIER FITTING LINK
(TYPICAL)
(CARGO BARRIER WALL PANELS AND SUPPORT
BEAMS NOT SHOWN FOR CLARITY)
3062689
ICN-B787-A-000061-A-81205-20198-A-01-1
Task 4 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 26 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 27

Table 1  
More DataQtyIdentificationNameActionStep
-4BACC30CP10KCollarRemove1
-4BACB30YK10K10BoltRemove
-1BACN11Z7CKNutRemove2
-1BACW10BN7KPPlain WasherRemove
-1BACW10BN7KCCSK WasherRemove
-1BACB30MR7A18BoltRemove
-1BACP18BD13A21Straight PinRemove
-1BACP18BC02A06PCotter PinRemove
-2464Z5594-203Vertical BushingRemove / Keep
-1464Z5595-211Pin NutRemove / Keep
-1464Z5595-209Fuse PinRemove / Keep
-2464Z5594-205Sliding BushingRemove / Keep
*[1]1464Z5187-169CARGO SUPPORT
FTG LINK
Remove3
*[1]  Retain any shim(s) for possible reuse.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 27 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 28

Task 5 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK
INSTALLATION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 28 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 29 (OCR)

BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20199-A-01-1
Task 5 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 29 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 30 (OCR)

A BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
CARGO
BARRIER
SUPPORT
CARGO
BARRIER
STANCHION
RIGHT CARGO BARRIER FITTING LINK
(TYPICAL)
(CARGO BARRIER WALL PANELS AND SUPPORT
BEAMS NOT SHOWN FOR CLARITY)
A-A  3062690
ICN-B787-A-000061-A-81205-20200-A-01-1
Task 5 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 30 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 31

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1464Z5187-169CARGO SUPPORT
FTG LINK
Locate1
*[2]4-HOLEDrill2
-4--Deburr
*[3]--SealantApply3
-1464Z5187-169CARGO SUPPORT
FTG LINK
Install (New)4
*[4]*[5]*[6]*[7]*[8]4BACB30YK10K10BOLT, PROTRUDING
TENSION HEAD, HEX
DRIVE, 125 KSI
SHEAR, NICKEL AL-
LOY 718 (NOMINAL
AND OVERSIZE)
Install (New)5
*[6]*[7]*[8]4BACC30CP10KCOLLAR, PRELOAD,
TENSION, 17-4PH
CORROSION RESIS-
TANT STEEL(NOMI-
NAL AND OVERSIZE)
Install (New)
-1464Z5595-209Fuse PinInstall (Kept)6
-2464Z5594-205Sliding BushingInstall (Kept)
-1464Z5595-211Pin NutInstall (Kept)
-1BACP18BD13A21Straight PinInstall (New)
*[9]1BACP18BC02A06PPIN, COTTER (SPLIT)Install (New)
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 31 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 32

Table 1  
More DataQtyIdentificationNameActionStep
-2464Z5594-203Vertical BushingInstall (Kept)7
-1BACW10BN7KPWASHER, PLAIN OR
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL, AL
Install (New)
*[10]*[11]1BACB30MR7A18BOLT, 12 POINT
HEAD, 160 KSI MIN
TENSILE, 95 KSI MIN
SHEAR, 6AL-4V TITA-
NIUM (NOMINAL AND
OVERSIZE)
Install (New)
-1BACN11Z7CKNUT, SELF-LOCKING,
12 POINT, 180 KSI
TENSILE, 450 F AND
900 F
Install (New)
-1BACW10BN7KCCSK WasherInstall (New)
*[1]  Make sure the Cargo Barrier Fitting Link and Cargo Barrier Support interface gap is less than or equal to 0.005 inches. If the gap is
greater than 0.005 inches but less than or equal to .110 inches, shim using BACS40V033E034 or kept shim. Refer to SOPM 20-50-
20 Type II as an accepted procedure. Break any sharp edges to a radius or chamfer of approximately 0.002 inches to 0.010 inches.
*[2]  Match drill holes in new Cargo Barrier Fitting Link for fastener installation, including any new shims. Diameter 0.3125 - 0.3155 inches.
Refer to 787-9 SRM 51-43-01 Rev 28 or later revisions published on MyBoeingFleet and SOPM 20-10-07 as accepted procedures.
The drill template identified in Appendix B of SB B787-81205-SB530089-00 can be used to assist in fastener holes transfer.
*[3]  Apply faying surface seal between mating surfaces of Cargo Barrier Fitting Link and Cargo Barrier Support including both sides of
shims with BMS5-45. Refer to SOPM 20-50-19 as an accepted procedure.
*[4]  Install fastener with BMS5-45 sealant. Refer to SOPM 20-50-19 Method 3 as an accepted procedure.
*[5]  Permanent straight shank fastener installation. Refer to 787-9 SRM 51-43-05 Rev 28 or later revisions published on MyBoeingFleet
as an accepted procedure.
*[6]  Apply chemical conversion coating to any bared aluminum surfaces common to the Cargo Barrier Stanchion and Cargo Barrier Support.
Refer to SOPM 20-43-03 Type II, Class A as an accepted procedure.
*[7]  Clean and reactivate primer on areas to be painted. Refer to SOPM 20-41-02 as an accepted procedure.
*[8]  Apply one coat of BMS10-11 Type 1, yellow primer to fastener heads, collars, scratches and bared surfaces. Refer to SOPM 20-41-
02 as an accepted procedure.
*[9]  Refer to SOPM 20-50-02 as an accepted procedure.
*[10]  Apply a thin coating of BMS3-33 to mating surfaces of bolt and bushings prior to installation, including bolt threads, washers and
bearing face of nut. Use lubed bolt torque range. Refer to 787-9 SRM 51-41-07 Rev 28 as an accepted procedure.
*[11]  Refer to 787-9 SRM 51-41-07 Rev 28 as an accepted procedure.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 32 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 33

Task 6 – SECTION 46 LEFT CARGO BARRIER FITTING LINK REMOVAL
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 33 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 34 (OCR)

A BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20201-A-01-1
Task 6 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 34 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 35 (OCR)

@ BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
1) 4 LOCATIONS
CARGO
BARRIER
SUPPORT
CARGO
BARRIER
STANCHION
LEFT CARGO BARRIER FITTING LINK
(TYPICAL)
(CARGO BARRIER WALL PANELS AND SUPPORT
BEAMS NOT SHOWN FOR CLARITY)
3063471
ICN-B787-A-000061-A-81205-20202-A-01-1
Task 6 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 35 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 36

Table 1  
More DataQtyIdentificationNameActionStep
-4BACC30CP10KCollarRemove1
-4BACB30YK10K10BoltRemove
-1BACN11Z7CKNutRemove2
-1BACW10BN7KPPlain WasherRemove
-1BACW10BN7KCCSK WasherRemove
-1BACB30MR7A18BoltRemove
-1BACP18BD13A( )Straight PinRemove
-1BACP18BC02A06PCotter PinRemove
-2464Z5594-209Vertical BushingRemove / Keep
-1464Z5595-221Pin NutRemove / Keep
-1464Z5595-()Fuse PinRemove / Keep
-2464Z5594-213Sliding BushingRemove / Keep
*[1]1464Z5187-169CARGO SUPPORT
FTG LINK
Remove3
*[1]  Retain any shim(s) for possible reuse.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 36 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 37

Task 7 – SECTION 46 LEFT CARGO BARRIER FITTING LINK INSTALLATION
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 37 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 38 (OCR)

A BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 2.
STA
1292
AFT CARGO
COMPARTMENT
(EXAMPLE)
AFT CARGO COMPARTMENT CEILING
(CARGO BARRIER WALL PANELS NOT SHOWN FOR CLARITY)
ICN-B787-A-000061-A-81205-20203-A-01-1
Task 7 Figure 1
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 38 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 39 (OCR)

@ BOEING  B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN
CARGO
BARRIER
SUPPORT
CARGO
BARRIER
STANCHION
LEFT CARGO BARRIER FITTING LINK
(TYPICAL
(CARGO BARRIER WALL PANELS AND SUPPORT
BEAMS NOT SHOWN FOR CLARITY,
B
A-A  3063472
ICN-B787-A-000061-A-81205-20204-A-01-1
Task 7 Figure 2
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 39 of 73
Export Controlled ECCN: 9E991
See page 1 for details

### Page 40

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1464Z5187-169CARGO SUPPORT
FTG LINK
Locate1
*[2]4-HOLEDrill2
-4--Deburr
*[3]--SealantApply3
-1464Z5187-169CARGO SUPPORT
FTG LINK
Install (New)4
*[4]*[5]*[6]*[7]*[8]4BACB30YK10K10BOLT, PROTRUDING
TENSION HEAD, HEX
DRIVE, 125 KSI
SHEAR, NICKEL AL-
LOY 718 (NOMINAL
AND OVERSIZE)
Install (New)5
*[6]*[7]*[8]4BACC30CP10KCOLLAR, PRELOAD,
TENSION, 17-4PH
CORROSION RESIS-
TANT STEEL(NOMI-
NAL AND OVERSIZE)
Install (New)
-1464Z5595-( )Fuse PinInstall (Kept)6
-2464Z5594-213Sliding BushingInstall (Kept)
-1464Z5595-221Pin NutInstall (Kept)
-1BACP18BD13A25Straight PinInstall (New)
*[9]1BACP18BC02A06PPIN, COTTER (SPLIT)Install (New)
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 40 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 41

Table 1  
More DataQtyIdentificationNameActionStep
-2464Z5594-209Vertical BushingInstall (Kept)7
-1BACW10BN7KPWASHER, PLAIN OR
COUNTERSUNK
(NOMINAL, .0156 AND
.0312 OVERSIZE) AL-
LOY STEEL, AL
Install (New)
*[10]*[11]1BACB30MR7A18BOLT, 12 POINT
HEAD, 160 KSI MIN
TENSILE, 95 KSI MIN
SHEAR, 6AL-4V TITA-
NIUM (NOMINAL AND
OVERSIZE)
Install (New)
-1BACN11Z7CKNUT, SELF-LOCKING,
12 POINT, 180 KSI
TENSILE, 450 F AND
900 F
Install (New)
-1BACW10BN7KCCSK WasherInstall (New)
*[1]  Make sure the Cargo Barrier Fitting Link and Cargo Barrier Support interface gap is less than or equal to 0.005 inches. If the gap is
greater than 0.005 inches but less than or equal to .110 inches, shim using BACF3U032P034 or kept shim. Refer to SOPM 20-50-20
Type VI as an accepted procedure. Break any sharp edges to a radius or chamfer of approximately 0.002 inches to 0.010 inches.
*[2]  Match drill holes in new Cargo Barrier Fitting Link for fastener installation, including any new shims. Diameter 0.3125 - 0.3155 inches.
Refer to 787-10 SRM 51-43-01 Rev 14 or later revisions published on MyBoeingFleet and SOPM 20-10-07 as accepted procedures.
The drill template identified in Appendix B of SB B787-81205-SB530089-00 can be used to assist in fastener holes transfer.
*[3]  Apply faying surface seal between mating surfaces of Cargo Barrier Fitting Link and Cargo Barrier Support including both sides of
shims with BMS5-45. Refer to SOPM 20-50-19 as an accepted procedure.
*[4]  Install fastener with BMS5-45 sealant. Refer to SOPM 20-50-19 Method 3 as an accepted procedure.
*[5]  Permanent straight shank fastener installation. Refer to 787-10 SRM 51-43-05 Rev 14 or later revisions published on MyBoeingFleet
as an accepted procedure.
*[6]  Apply chemical conversion coating to any bared aluminum surfaces common to the Cargo Barrier Stanchion and Cargo Barrier Support.
Refer to SOPM 20-43-03 Type II, Class A as an accepted procedure.
*[7]  Clean and reactivate primer on areas to be painted. Refer to SOPM 20-41-02 as an accepted procedure.
*[8]  Apply one coat of BMS10-11 Type 1, yellow primer to fastener heads, collars, scratches and bared surfaces. Refer to SOPM 20-41-
02 as an accepted procedure.
*[9]  Refer to SOPM 20-50-02 as an accepted procedure.
*[10]  Apply a thin coating of BMS3-33 to mating surfaces of bolt and bushings prior to installation, including bolt threads, washers and
bearing face of nut. Use lubed bolt torque range. Refer to 787-10 SRM 51-41-07 Rev 14 as an accepted procedure.
*[11]  Refer to 787-10 SRM 51-41-07 Rev 14 as an accepted procedure.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 41 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 42

Task 8 – SECTION 46 RIGHT CARGO BARRIER FITTING LINK REMOVAL
[Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
Page 42 of 73
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB530089-00 RB
Issue 001, 07 Feb 2025 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
