# Boeing Service Bulletin B787-81205-SB550009-00

Copy: No revision named ("RB-B787-81205-SB550009-00-01 RB"), 41 pages: PDF https://openairdocs.org/files/sha256/7c/9d/7c9d4bb8ac65339017e68e6211fbbe9cc46defb6a6d01023c810ae33f7580f6f; text https://openairdocs.org/service-documents/boeing/b787-81205-sb550009-00/file/7c9d4bb8ac65.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0608, the docket of AD 2019-16-10. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: B787-81205-SB550009-00
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb550009-00

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-16-10](https://openairdocs.org/ad/2019-16-10.md), effective Sep 19, 2019: No revision named

## Text (41 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0608, the docket of AD 2019-16-10. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Requirements Bulletin B787-81205-SB550009-00 RB STABILIZERS -
Horizontal Stabilizer Pivot Fitting Assembly - Inspection and Replacement
Copyright © 2019 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 1 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
5.0
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TASK 1 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TASK 2 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 1] . 19
TASK 3 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
TASK 4 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 1] . 34
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 2 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8 Airplane(s), line number(s) 60, 81, 113, 144, 154, 172, 176, 188,
192, 200, 204, 208, 220, 224 in 1 Group(s).
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes delivered with possible horizontal stabilizer pivot pin
lockring, outer pivot pin, and outboard spacer misalignment and incor-
rect gapping.
-1
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB550009-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB550009-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Accomplish the required actions, based on the applicable conditions in Table 4 and Table 5 in accordance
with the Accomplishment Instructions.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 3 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 4

Table 4  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB550009-00 RB.
Do a detailed inspection of
the left side horizontal sta-
bilizer pivot pin assembly
for misalignment and incor-
rect gapping. *[1]*[2]
All Airplanes.
--No further action required.CONDITION 1: LEFT SIDE
HORIZONTAL STABILIZ-
ER PIVOT PIN ASSEM-
BLY MISALIGNMENT AND
INCORRECT GAPPING
NOT FOUND.
-Before further
flight.
Replace the left side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 2: LEFT SIDE
HORIZONTAL STABILIZ-
ER PIVOT PIN ASSEM-
BLY MISALIGNMENT AND
INCORRECT GAPPING
FOUND.
*[1]  Misalignment is defined as having the pivot pin lockring pointing outboard, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
Table 5  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 36 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB550009-00 RB.
Do a detailed inspection of
the right side horizontal
stabilizer pivot pin assem-
bly for misalignment and
incorrect gapping. *[1]*[2]
All Airplanes.
--No further action required.CONDITION 3: RIGHT
SIDE HORIZONTAL STA-
BILIZER PIVOT PIN AS-
SEMBLY MISALIGNMENT
AND INCORRECT GAP-
PING NOT FOUND.
-Before further
flight.
Replace the right side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 4: RIGHT
SIDE HORIZONTAL STA-
BILIZER PIVOT PIN AS-
SEMBLY MISALIGNMENT
AND INCORRECT GAP-
PING FOUND.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 4 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 5

Table 5  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
*[1]  Misalignment is defined as having the pivot pin lockring pointing outboard, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved for the airplanes
listed in the service bulletin effectivity. This document and its approval were based on the airplane in its
original Boeing delivery configuration or as modified by other approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 5 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 6

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
2. Use the approved fastener, process and material substitutions in accordance with SRM
Chapter 51.
3. If the length of any fastener specified in this service bulletin does not meet the installation
standards in SRM Chapter 51, then a fastener of the same specification, or an approved
substitute, with a length which meets the installation standards in SRM Chapter 51 may
be used. In addition, washers may be installed for fastener grip length in accordance with
SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws)
needed for installation in this service bulletin.
4. A Detailed Inspection is defined as: An intensive examination of a specific item, installation,
or assembly to detect damage, failure, or irregularity. This could include tactile assessment
in which a component or assembly can be checked for tightness/security. Available
lighting is normally supplemented with a direct source of good lighting at an intensity
deemed appropriate. Inspection aids such as mirrors,magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
5. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 6 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 7

6. Boeing Service Letter 787-SL-51-001, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for additional
structural repair instructions. The Service Letter describes what information must be
provided to Boeing before a structural repair can be provided
7. The Work Instructions and the Tasks can include operation of tools or test equipment.
Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the
Special Tool and Ground Handling Drawing Index contain data on versions of the tools
or test equipment that you can use. It is permitted to use replaced tools. It is not permitted
to use superseded tools.
8. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
9. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
10. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION, do
all of the ACTION numbers for that CONDITION or OPTION.
11. The compliance times for the actions in Work Instructions are in Compliance.
12. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any figures identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified figures, can still be done as specified, and the airplane can be put back in an
airworthy condition. Figures not required for compliance are omitted from the RB.
13. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance:
Requirements(1)
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 7 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 8

Table 1  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550009-00 or
later approved re-
visions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC-
CESS
-Do a detailed inspection of
the left side horizontal sta-
bilizer pivot pin assembly
for misalignment and incor-
rect gapping. *[1]*[2]
All Airplanes.
-Task 1
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-No further action required.CONDITION 1: LEFT SIDE
HORIZONTAL STABILIZ-
ER PIVOT PIN ASSEM-
BLY MISALIGNMENT AND
INCORRECT GAPPING
NOT FOUND. PART 8: HORIZON-TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 8 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 9

Table 1  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550009-00 or
later approved re-
visions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 2: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA-
TION
-Replace the left side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 2: LEFT SIDE
HORIZONTAL STABILIZ-
ER PIVOT PIN ASSEM-
BLY MISALIGNMENT AND
INCORRECT GAPPING
FOUND.
-Task 2
PART 4: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT -
RESTORATION
-
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-
PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST
-
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
*[1]  Misalignment is defined as having the pivot pin lockring pointing outboard, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 9 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 10

Table 2  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550009-00 or
later approved re-
visions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC-
CESS
-Do a detailed inspection of
the right side horizontal
stabilizer pivot pin assem-
bly for misalignment and
incorrect gapping. *[1]*[2]
All Airplanes.
-Task 3
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-No further action required.CONDITION 3: RIGHT
SIDE HORIZONTAL STA-
BILIZER PIVOT PIN AS-
SEMBLY MISALIGNMENT
AND INCORRECT GAP-
PING NOT FOUND. PART 8: HORIZON-TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 10 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 11

Table 2  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550009-00 or
later approved re-
visions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 3: RIGHT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA-
TION
-Replace the right side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 4: RIGHT
SIDE HORIZONTAL STA-
BILIZER PIVOT PIN AS-
SEMBLY MISALIGNMENT
AND INCORRECT GAP-
PING FOUND.
-Task 4
PART 5: RIGHT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT -
RESTORATION
-
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-
PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST
-
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
*[1]  Misalignment is defined as having the pivot pin lockring pointing outboard, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 11 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 12

Task 1 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
DETAILED INSPECTION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 12 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 13 (OCR)

A BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
2844960
ICN-B787-A-000061-A-81205-16534-A-01-1
Figure 1
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 13 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 14 (OCR)

BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
INBD
A-A
OUTER PIN
INNER PIN
ANTIROTATION PLATE
INBOARD SPACER
INBD
B-B  2844961
ICN-B787-A-000061-A-81205-16535-A-01-1
Figure 2
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 14 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 15

ICN-B787-A-000061-A-81205-16536-A-01-1
Figure 3
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 15 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 16 (OCR)

A BOEING  B787-81205-SB550009-00 RB  Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
0.161
0.091
O FRAING
O PUTER
DLOCKRING
~ NUT  OUTBOARD
1) OUTBOARD  SPACER
INBD
CORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER  U FITTING  • TRAP
U LOCKRING
OUTBOARD
NUT
OUTBOARD
SPACER
INCORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER, BUT LOCKRING
POINTING OUTWARDS
INBD  2850837
ICN-B787-A-000061-A-81205-16537-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 16 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 17

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1182W6402-5PIN OUTBD SPACERInspect1
*[1]*[2]1182W6404-4LOCKRINGInspect
*[1]*[2]1182W6404-1NUT OUTBOARDInspect
*[1]*[2]1182W6405-1TRAP FITTINGInspect
*[1]*[2]1311Z6402-5PIN OUTERInspect
*[1]*[3]1311Z6402-5PIN OUTERInspect2
*[1]*[3]1311Z6401-5PIN INNERInspect
*[1]*[3]1-ANTIROTATION-PLATEInspect
*[1]*[3]1182W6402-4SPACER INBOARDInspect
*[1]  Do a detailed inspection of the left side horizontal stabilizer pivot pin assembly for misalignment and incorrect gapping.
*[2]  Misalignment is defined as having the pivot pin lockring pointing outboard, or not engaged to the outer pin and outer spacer.
*[3]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the inner pin
and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 17 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 18

Task 2 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
REPLACEMENT [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 18 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 19 (OCR)

A BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
2844971
ICN-B787-A-000061-A-81205-16538-A-01-1
Figure 1
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 19 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 20

ICN-B787-A-000061-A-81205-16539-A-01-1
Figure 2
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 20 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 21 (OCR)

A BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
8 11) OUTER  PIN  INBOARD
SPACER
) OUTBOARD
1) PIVOT BULKHEAD  SPACER
INBOARD FITTING  BEARING
NUT  13) LOCKRING
€ 14 INNER
(11) OUTBOARD
11 INBOARD  WASHER  15)  RETAINING  BOLT
WASHER
TRAP
) ANTIROTATION  PLATE  FITTING
18) INBOARD  4113 17 20) OUTBOARD  NUT
NUT  INBD
B-B  2844973
ICN-B787-A-000061-A-81205-16540-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 21 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 22

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Remove1
*[1]1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Remove
*[1]1BACP18BC02A06HPIN, COTTER (SPLIT)Remove
*[1]1182W6404-5NUT INBOARDRemove
*[1]1NAS1149C0932RWASHER, FLATRemove
From the antirota-
tion plate to the
pivot bulkhead
inboard fitting
nut. *[2]
--LOCKWIRERemove2
*[1]1-ANTIROTATION-PLATERemove/Keep3
From the trap fit-
ting to the out-
board nut. *[3]
--LOCKWIRERemove4
*[1]1182W6405-1TRAP FITTINGRemove5
*[1]1182W6401-5BOLT RETAININGRemove
*[1]1311Z6401-5PIN INNERRemove6
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 22 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 23

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1182W6404-1NUT OUTBOARDRemove7
*[1]1182W6404-4LOCKRINGRemove
*[4]*[1]1311Z6402-5PIN OUTERRemove8
*[1]1182W6404-3WASHER OUTBOARDRemove
*[1]1182W6404-3WASHER INBOARDRemove
*[1]1182W6402-4INBOARD SPACERRemove9
*[1]1182W6402-5PIN OUTBD SPACERRemove10
*[5]*[1]1182W6404-3WASHER INBOARDInstall (New)11
*[5]*[1]1182W6404-3WASHER OUTBOARDInstall (New)
*[5]*[6]*[1]1182W6402-4INBOARD SPACERInstall (New)
*[5]*[7]*[1]1311Z6402-5PIN OUTERInstall (New)
*[5]*[6]*[1]1182W6402-5PIN OUTBD SPACERInstall (New)12
*[5]*[1]1182W6404-4LOCKRINGInstall (New)13
*[5]*[1]1182W6404-1NUT OUTBOARDInstall (New)
*[5]*[1]1311Z6401-5PIN INNERInstall (New)14
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 23 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 24

Table 1  
More DataQtyIdentificationNameActionStep
*[8]1BACB30NM3DK18BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)15
Under the bolt
head. *[8]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[5]*[1]1182W6405-1TRAP FITTINGInstall (New)
*[5]*[1]1182W6401-5BOLT RETAININGInstall (New)
Under the castel-
lated nut. *[8]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[8]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[9]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[5]*[10]*[1]1-ANTIROTATION-PLATEInstall (Kept)16
*[11]1182W6402-4SPACER INBOARDTurn
*[12]--TORQUEApply17
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 24 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 25

Table 1  
More DataQtyIdentificationNameActionStep
Under the in-
board nut. *[5]*[1]
1NAS1149C0932RWASHER, FLATInstall (New)18
*[5]*[1]1182W6404-5NUT INBOARDInstall (New)
*[13]--TORQUEApply
*[8]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)
Under the bolt
head. *[8]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
Under the castel-
lated nut. *[8]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[8]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[9]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[14]--TORQUEApply19
From the trap fit-
ting to the out-
board nut. *[15]
-MS20995NC51LOCKWIREInstall (New)20
From the antirota-
tion plate to the
pivot bulkhead
inboard fitting
nut. *[16]
-MS20995NC51LOCKWIREInstall (New)21
*[1]  Refer to 787 AMM 55-17-01 as an accepted procedure.
*[2]  Remove the lockwire currently installed from the antirotation plate to the pivot bulkhead inboard fitting nut. Refer to 787 AMM 20-10-
23 as an accepted procedure.
*[3]  Remove the lockwire currently installed from the trap fitting to the outboard nut. Refer to 787 AMM 20-10-23 as an accepted procedure.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 25 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 26

Table 1  
*[4]  Remove the outer pin with care to prevent the outer pin threads causing damage to the pivot bearing.
*[5]  Before installation, apply a continuous layer of BMS3-33 grease to the pivot pin assembly parts. After installation, make sure there is
grease squeeze out from the pivot pin assembly parts. Refer to SOPM 20-50-07 as an accepted procedure.
*[6]  Make sure the spacer is set flush against the washer and pivot bearing.
*[7]  Install the new outer pin with care to prevent the pin threads causing damage to the pivot bearing.
*[8]  Refer to SOPM 20-50-01 as an accepted procedure.
*[9]  Refer to SOPM 20-50-02 as an accepted procedure.
*[10]  Make sure the antirotation plate is engaged with pivot bulkhead pivot fitting antirotation clip.
*[11]  Turn the threaded inboard spacer until it is fully engaged with the pivot bulkhead inboard fitting nut and engaged in the slots of the
antirotation plate.
*[12]  Apply 75-100 in-lbs torque to the outboard nut. Make sure the lockring is engaged in the slots of the outer pin and in the slots of the
outboard spacer before final torque is applied to the outboard nut. Loosen the outboard nut one turn then apply 25-30 in-lbs final torque.
*[13]  Apply a minimum of 200 in-lbs initial torque to the inboard nut. Apply a maximum of 400 in-lbs torque to the inboard nut until it aligns
with the next slot in the retaining bolt.
*[14]  Apply 500-700 in-lbs torque to the trap fitting.
*[15]  Install new lockwire from the trap fitting to the outboard nut. The outboard nut may turn up to 10 degrees during lockwire installation.
Install the lockwire using the double twist method. Refer to SOPM 20-50-02 as an accepted procedure.
*[16]  Install new lockwire from the pivot bulkhead inboard fitting nut to the antirotation plate. Install the lockwire using the double twist method.
Refer to SOPM 20-50-02 as an accepted procedure.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 26 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 27

Task 3 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
DETAILED INSPECTION [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 27 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 28 (OCR)

Q BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
2844987
ICN-B787-A-000061-A-81205-16541-A-01-1
Figure 1
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 28 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 29 (OCR)

BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
B
INBD
A-A
OUTER PIN
2) INNER PIN
• ANTIROTATION PLATE
2 INBOARD SPACER
INBD
B-B
ICN-B787-A-000061-A-81205-16542-A-01-1
Figure 2
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 29 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 30

ICN-B787-A-000061-A-81205-16543-A-01-1
Figure 3
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 30 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 31 (OCR)

A BOEING  B787-81205-SB550009-00 RB  Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
0.161
0.091
TRAP
FITTING 1
OUTER (1  PIN
LOCKRING 1
ION  OUIBOARD 1A
INBD
CORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER
TRAP
FITTING
LOCKRING(
OUTBOARD
NUT
OUTBOARD(
SPACER
INCORRECT INSTA  LATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER, BUT LOCKRING
INBD  POINTING OUTWARDS
ICN-B787-A-000061-A-81205-16544-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 31 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 32

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1182W6402-5PIN OUTBD SPACERInspect1
*[1]*[2]1182W6404-4LOCKRINGInspect
*[1]*[2]1182W6404-1NUT OUTBOARDInspect
*[1]*[2]1182W6405-1TRAP FITTINGInspect
*[1]*[2]1311Z6402-5PIN OUTERInspect
*[1]*[3]1311Z6402-5PIN OUTERInspect2
*[1]*[3]1311Z6401-5PIN INNERInspect
*[1]*[3]1-ANTIROTATION-PLATEInspect
*[1]*[3]1182W6402-6SPACER INBOARDInspect
*[1]  Do a detailed inspection of the right side horizontal stabilizer pivot pin assembly for misalignment and incorrect gapping.
*[2]  Misalignment is defined as having the pivot pin lockring pointing outboard, or not engaged to the outer pin and outer spacer.
*[3]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the inner pin
and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 32 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 33

Task 4 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
REPLACEMENT [Group 1:]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 33 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 34 (OCR)

Q BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
Procedure
This Task applies only to: Group 1.
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
2845005
ICN-B787-A-000061-A-81205-16545-A-01-1
Figure 1
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 34 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 35

ICN-B787-A-000061-A-81205-16546-A-01-1
Figure 2
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 35 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 36 (OCR)

@ BOEING  B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN
11) OUTBOARD
SPACER
RETAINING  (5) INBOARD
BOLT  BEARING  SPACER
I2) LOCKRING
10) OUTER
PIN
(13) INNER
PIN
(10) INBOARD  17) INBOARD
OUTBOARD  WASHER  NUT
WASHER
ANTIROTATION
OUTBOARD  PLATE
NUT
34 1 18 19 TRAP  INBD
FITTING
B-B
2845007
ICN-B787-A-000061-A-81205-16547-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 36 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 37

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Remove1
*[1]1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Remove
*[1]1BACP18BC02A06HPIN, COTTER (SPLIT)Remove
*[1]1182W6404-5NUT INBOARDRemove
*[1]1NAS1149C0932RWASHER, FLATRemove
*[1]1-ANTIROTATION-PLATERemove/Keep2
From the trap fit-
ting to the out-
board nut. *[2]
--LOCKWIRERemove3
*[1]1182W6405-1TRAP FITTINGRemove4
*[1]1182W6401-5BOLT RETAININGRemove
*[1]1311Z6401-5PIN INNERRemove5
*[1]1182W6404-1NUT OUTBOARDRemove6
*[1]1182W6404-4LOCKRINGRemove
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 37 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 38

Table 1  
More DataQtyIdentificationNameActionStep
*[3]*[1]1311Z6402-5PIN OUTERRemove7
*[1]1182W6404-3WASHER OUTBOARDRemove
*[1]1182W6404-3WASHER INBOARDRemove
*[1]1182W6402-6INBOARD SPACERRemove8
*[1]1182W6402-5PIN OUTBD SPACERRemove9
*[4]*[1]1182W6404-3WASHER INBOARDInstall (New)10
*[4]*[1]1182W6404-3WASHER OUTBOARDInstall (New)
*[4]*[5]*[1]1182W6402-6INBOARD SPACERInstall (New)
*[4]*[6]*[1]1311Z6402-5PIN OUTERInstall (New)
*[4]*[5]*[1]1182W6402-5PIN OUTBD SPACERInstall (New)11
*[4]*[1]1182W6404-4LOCKRINGInstall (New)12
*[4]*[1]1182W6404-1NUT OUTBOARDInstall (New)
*[4]*[1]1311Z6401-5PIN INNERInstall (New)13
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 38 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 39

Table 1  
More DataQtyIdentificationNameActionStep
*[7]1BACB30NM3DK18BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)14
Under the bolt
head. *[7]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[4]*[1]1182W6405-1TRAP FITTINGInstall (New)
*[4]*[1]1182W6401-5BOLT RETAININGInstall (New)
Under the castel-
lated nut. *[7]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[7]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[8]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[4]*[9]*[1]1-ANTIROTATION-PLATEInstall (Kept)15
*[10]1182W6402-6INBOARD SPACERTurn
*[11]--TORQUEApply16
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 39 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 40

Table 1  
More DataQtyIdentificationNameActionStep
Under the in-
board nut. *[4]*[1]
1NAS1149C0932RWASHER, FLATInstall (New)17
*[4]*[1]1182W6404-5NUT INBOARDInstall (New)
*[12]--TORQUEApply
*[7]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)
Under the bolt
head. *[7]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
Under the castel-
lated nut. *[7]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[7]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[8]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[13]--TORQUEApply18
From the trap fit-
ting to the out-
board nut. *[14]
-MS20995NC51LOCKWIREInstall (New)19
*[1]  Refer to 787 AMM 55-17-01 as an accepted procedure.
*[2]  Remove the lockwire currently installed from the trap fitting to the outboard nut. Refer to 787 AMM 20-10-23 as an accepted procedure.
*[3]  Remove the outer pin with care to prevent the outer pin threads causing damage to the pivot bearing.
*[4]  Before installation, apply a continuous layer of BMS3-33 grease to the pivot pin assembly parts. After installation, make sure there is
grease squeeze out from the pivot pin assembly parts. Refer to SOPM 20-50-07 as an accepted procedure.
*[5]  Make sure the spacer is set flush against the washer and pivot bearing.
*[6]  Install the new outer pin with care to prevent the pin threads causing damage to the pivot bearing.
*[7]  Refer to SOPM 20-50-01 as an accepted procedure.
*[8]  Refer to SOPM 20-50-02 as an accepted procedure.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 40 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

### Page 41

Table 1  
*[9]  Make sure the antirotation plate is engaged with pivot bulkhead pivot fitting antirotation clip.
*[10]  Turn the inboard spacer until it is engaged in the slots of the antirotation plate.
*[11]  Apply 75-100 in-lbs torque to the outboard nut. Make sure the lockring is engaged in the slots of the outer pin and in the slots of the
outboard spacer before final torque is applied to the outboard nut. Loosen the outboard nut one turn then apply 25-30 in-lbs final torque.
*[12]  Apply a minimum of 200 in-lbs initial torque to the inboard nut. Apply a maximum of 400 in-lbs torque to the inboard nut until it aligns
with the next slot in the retaining bolt.
*[13]  Apply 500-700 in-lbs torque to the trap fitting.
*[14]  Install new lockwire from the trap fitting to the outboard nut. The outboard nut may turn up to 10 degrees during lockwire installation.
Install the lockwire using the double twist method. Refer to SOPM 20-50-02 as an accepted procedure.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
Page 41 of 41
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB550009-00 RB
Issue 001, 02 Apr 2019
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
