# Boeing Alert Requirements Bulletin B787-81205-SB550013-00 RB

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 001, part 1 of 2 ("RBSB78755A001301_Part1"), 69 pages: PDF https://openairdocs.org/files/sha256/c2/a5/c2a5136ae11e3d9651523cd24e0a648d9534dcde3eaf66e05c996c3fb5bee200; text https://openairdocs.org/service-documents/boeing/b787-81205-sb550013-00-rb/file/c2a5136ae11e.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2410; AD 2025-06-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 001, part 2 of 2 ("RBSB78755A001301_Part2"), 8 pages: PDF https://openairdocs.org/files/sha256/cf/2e/cf2eb4154c04aff2a4a718b1be0fc43ddc35d191f0fc1bbc8133398a447427bc; text https://openairdocs.org/service-documents/boeing/b787-81205-sb550013-00-rb/file/cf2eb4154c04.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2410; AD 2025-06-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB550013-00 RB
- Latest revision known: B787-81205-SB550013-00 RB, Issue 001, dated August 30, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb550013-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-06-10](https://openairdocs.org/ad/2025-06-10.md), effective May 2, 2025: Revision 001

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb550013-00-rb/proposed.md).

## Text (69 pages)

Revision 001, part 1 of 2, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2024-2410; AD 2025-06-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB550013-00 RB STABILIZERS -
Horizontal Stabilizers - Pivot Fitting Inspection and Replacement
Copyright © 2024 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 1 of 77
Export Controlled ECCN: 9E991
See page 1 for details
3.0
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TASK 1 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TASK 2 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 1] . 24
TASK 3 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
TASK 4 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 1] . 39
TASK 5 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
TASK 6 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 2] . 54
TASK 7 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION [Group
2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
TASK 8 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT [Group 2] . 69
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 2 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-59, 61-80, 82-112,
114-143, 145-153, 155-171, 173-175, 177-187, 189-191, 193-199, 201-203, 205-207, 209-219,
221-223, 225-226, 228-229, 231, 233-234, 236-238, 240-241, 243-244, 246, 248-249, 251-253,
255-256, 258-259, 261, 263-264, 266-278, 280-281, 283, 285-288, 290, 292-293, 295-296, 298-
687, 689-897, 899-912, 914-954, 956-970, 972-982, 984-989, 991-996, 999, 1001-1008, 1012-
1013, 1017-1018, 1021-1022, 1024-1026, 1029-1032, 1038, 1041, 1044-1045, 1047-1048, 1054-
1062, 1071, 1074-1075, 1087, 1091, 1094-1095, 1098-1099, 1103, 1109, 1112, 1126, 1129-1134,
1136-1138, 1141 in 2 Group(s). Where the effectivity is presented with hyphens between line
numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means
line numbers 1 through 9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplanes delivered with possible horizontal stabilizer pivot pin
lockring, outer pivot pin, and outboard spacer misalignment and incor-
rect gapping.
-1
787-8, -9, and -10 Airplanes delivered with possible horizontal stabilizer
pivot pin lockring, outer pivot pin, and outboard spacer misalignment
and incorrect gapping.
-2
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA144
1ZA152 - ZA156
GroupVariable Number
1ZA175 - ZA189
1ZA195 - ZA204
1ZA215 - ZA220
1ZA223 - ZA225
1ZA230 - ZA238
GroupVariable Number
1ZA240 - ZA245
1ZA249 - ZA256
1ZA260 - ZA277
1ZA285 - ZA296
1ZA317 - ZA322
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 3 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

GroupVariable Number
1ZA324
1ZA327
1ZA334
1ZA342
1ZA380 - ZA387
1ZA430 - ZA432
1ZA434 - ZA437
1ZA439
1ZA445 - ZA470
1ZA472
1ZA475 - ZA489
1ZA506 - ZA516
1ZA536 - ZA538
1ZA540 - ZA545
1ZA560 - ZA567
1ZA576 - ZA580
1ZA586
1ZA588 - ZA593
1ZA610 - ZA612
1ZA650 - ZA651
1ZA655 - ZA656
1ZA659
1ZA662 - ZA663
1ZA665 - ZA666
1ZA670 - ZA677
1ZA680
1ZA682
1ZA684 - ZA685
1ZA695 - ZA698
1ZA715 - ZA716
1ZA718 - ZA719
GroupVariable Number
1ZA740
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA831
1ZA839
1ZA841 - ZA842
1ZA846 - ZA848
1ZA853 - ZA862
1ZA873 - ZA874
2ZA875
1ZA876
1ZA881 - ZA888
1ZA916 - ZA920
1ZA949 - ZA950
1ZA954 - ZA959
1ZA963 - ZA966
1ZA968 - ZA972
1ZA990
2ZB001 - ZB012
2ZB021 - ZB043
2ZB047 - ZB060
2ZB077 - ZB081
2ZB097 - ZB121
2ZB127 - ZB128
2ZB130 - ZB136
2ZB167 - ZB171
2ZB173 - ZB191
2ZB197 - ZB198
2ZB217
2ZB219 - ZB220
GroupVariable Number
2ZB224 - ZB229
2ZB234 - ZB242
2ZB246 - ZB248
2ZB251 - ZB258
2ZB261 - ZB262
2ZB265 - ZB279
2ZB299
2ZB302 - ZB305
2ZB332 - ZB338
2ZB362 - ZB379
2ZB407 - ZB435
2ZB446 - ZB467
2ZB536 - ZB543
2ZB545 - ZB547
2ZB558 - ZB586
2ZB603 - ZB618
2ZB646 - ZB649
2ZB656 - ZB665
2ZB676 - ZB681
2ZB688 - ZB707
2ZB733 - ZB735
2ZB738 - ZB740
2ZB742 - ZB745
2ZB749 - ZB750
2ZB753 - ZB757
2ZB763 - ZB768
2ZB771 - ZB775
2ZB778 - ZB808
2ZB810 - ZB821
2ZB828 - ZB841
2ZB858 - ZB863
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 4 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

GroupVariable Number
2ZB874 - ZB876
2ZB890
2ZB893 - ZB902
2ZB908 - ZB918
2ZB922
2ZB924
2ZB926 - ZB927
2ZB934 - ZB946
2ZB951
2ZB967 - ZB971
2ZB977 - ZB978
2ZB980 - ZB986
2ZB990 - ZB991
2ZB993 - ZB997
2ZC001 - ZC015
2ZC036 - ZC048
2ZC051 - ZC056
2ZC061 - ZC069
2ZC101 - ZC103
2ZC106 - ZC107
2ZC116 - ZC118
2ZC126 - ZC129
GroupVariable Number
2ZC151 - ZC152
2ZC155 - ZC158
2ZC211 - ZC216
2ZC218 - ZC219
2ZC221 - ZC225
1ZD001 - ZD009
1ZD012 - ZD014
2ZD015
1ZD016 - ZD024
1ZD027
2ZE001 - ZE006
2ZE008
2ZE013
2ZE016 - ZE017
2ZE031 - ZE032
2ZE040 - ZE045
2ZE048
2ZE085 - ZE086
2ZE090 - ZE091
2ZE095 - ZE096
2ZE100
2ZE105 - ZE106
GroupVariable Number
2ZE110
2ZE112
2ZE115
2ZE150
2ZE165 - ZE166
2ZE170 - ZE171
2ZE195 - ZE198
2ZE220 - ZE234
2ZE238
2ZE270
2ZE310 - ZE311
2ZE340 - ZE341
2ZE350 - ZE362
2ZE375
2ZE380 - ZE381
2ZE415 - ZE416
2ZE425 - ZE426
2ZE435 - ZE437
2ZE455 - ZE456
2ZE481
2ZE486 - ZE487
--
2. Spares Affected
None.
B. CONCURRENT REQUIREMENTS
None.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 5 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB550013-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB550013-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Accomplish the required actions, based on the applicable conditions in Table 5 and Table 6 accordance
with the Accomplishment Instructions.
Table 5  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 32 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB550013-00 RB.
Do a Detailed Inspection
(DET) of the left side hori-
zontal stabilizer pivot pin
assembly for misalignment
and incorrect gapping.
*[1]*[2]
All Airplanes.
--No further action required.CONDITION 1: NO MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
-Before further
flight.
Replace the left side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 2: ANY MIS-
ALIGNMENT OR ANY IN-
CORRECT GAPPING
FOUND.
*[1]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the anti-rotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
Table 6  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 32 months
after the Issue 001
date of Require-
ments Bulletin
B787-81205-
SB550013-00 RB.
Do a Detailed Inspection
(DET) of the right side hor-
izontal stabilizer pivot pin
assembly for misalignment
and incorrect gapping.
*[1]*[2]
All Airplanes.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 6 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

Table 6  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
--No further action required.CONDITION 3: NO MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
-Before further
flight.
Replace the right side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 4: ANY MIS-
ALIGNMENT OR ANY IN-
CORRECT GAPPING
FOUND.
*[1]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the anti-rotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in this Requirements Bulletin effectivity. This document and its approval were based on the
airplane in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 7 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any figures identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified figures, can still be done as specified, and the airplane can be put back in an
airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 8 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
4. Use the approved fastener, process and material substitutions in accordance with SRM
Chapter 51.
5. If the length of any fastener specified in this bulletin does not meet the installation stan-
dards in SRM Chapter 51, then a fastener of the same specification, or an approved
substitute, with a length which meets the installation standards in SRM Chapter 51 may
be used. In addition, washers may be installed for fastener grip length in accordance with
SRM Chapter 51. Refer to SOPM 20-50-01, Bolt and Nut Installation, for alternate full
threaded fasteners (screws) needed for installation in this bulletin.
6. A Detailed Inspection (DET) is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. This could include tactile
assessment in which a component or assembly can be checked for tightness/security.
Available lighting is normally supplemented with a direct source of good lighting at an
intensity deemed appropriate. Inspection aids such as mirrors,magnifying lenses, etc.
may be necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
8. Boeing Service Letter 787-SL-51-001, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for additional
structural repair instructions. The Service Letter describes what information must be
provided to Boeing before a structural repair can be provided
9. The Work Instructions and the Tasks can include operation of tools or test equipment.
Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the
Special Tool and Ground Handling Drawing Index contain data on versions of the tools
or test equipment that you can use. It is permitted to use replaced tools. It is not permitted
to use superseded tools.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 9 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

10. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable part
with the same part number can be installed as an alternative to the kept part.
12. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION, do
all of the ACTION numbers for that CONDITION or OPTION.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance:
Requirements(1)
Group 1:
Table 1  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC-
CESS
-Do a detailed inspection of
the left side horizontal sta-
bilizer pivot pin assembly
for misalignment and incor-
rect gapping. *[1]*[2]
All Airplanes.
-Task 1
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-No further action required.CONDITION 1: NO MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 10 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Group 1:
Table 1  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 2: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA-
TION
-Replace the left side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 2: ANY MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
-Task 2
PART 4: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT -
RESTORATION
-
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-
PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST
-
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
*[1]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 11 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

Group 1:
Table 2  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC-
CESS
-Do a detailed inspection of
the right side horizontal
stabilizer pivot pin assem-
bly for misalignment and
incorrect gapping. *[1]*[2]
All Airplanes.
-Task 3
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-No further action required.CONDITION 3: NO MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 12 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

Group 1:
Table 2  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 3: RIGHT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA-
TION
-Replace the right side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 4: ANY MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
-Task 4
PART 5: RIGHT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT -
RESTORATION
-
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-
PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST
-
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
*[1]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 13 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

Group 2:
Table 3  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC-
CESS
-Do a detailed inspection of
the left side horizontal sta-
bilizer pivot pin assembly
for misalignment and incor-
rect gapping. *[1]*[2]
All Airplanes.
-Task 5
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-No further action required.CONDITION 5: NO MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 14 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

Group 2:
Table 3  Left Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 2: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA-
TION
-Replace the left side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 6: ANY MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
-Task 6
PART 4: LEFT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT -
RESTORATION
-
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-
PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST
-
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
*[1]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 15 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16

Group 2:
Table 4  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 1: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - OPEN AC-
CESS
-Do a detailed inspection of
the right side horizontal
stabilizer pivot pin assem-
bly for misalignment and
incorrect gapping. *[1]*[2]
All Airplanes.
-Task 7
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-No further action required.CONDITION 7: NO MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 16 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 17

Group 2:
Table 4  Right Side Horizontal Stabilizer Pivot Pin Assembly - Detailed Inspection
Refer to the listed
procedures in
Alert Service Bul-
letin B787-81205-
SB550013-00 Is-
sue 001 or later
approved revi-
sions as an ac-
cepted procedure:
Method of Compli-
ance
ActionCondition
PART 3: RIGHT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT - PREPARA-
TION
-Replace the right side hori-
zontal stabilizer pivot pin
assembly.
CONDITION 8: ANY MIS-
ALIGNMENT OR INCOR-
RECT GAPPING FOUND.
-Task 8
PART 5: RIGHT
SIDE - HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY REPLACE-
MENT -
RESTORATION
-
PART 6: HORIZON-
TAL STABILIZER -
RESTORE OPERA-
TION
-
PART 7: REPLACE-
MENT HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLY - OPERA-
TIONAL TEST
-
PART 8: HORIZON-
TAL STABILIZER
PIVOT PIN ASSEM-
BLIES - CLOSE
ACCESS
-
*[1]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[2]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the
inner pin and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 17 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Task 1 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
DETAILED INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 18 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19 (OCR)

ABOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
3045088
ICN-B787-A-000061-A-81205-19486-A-01-1
Figure 1
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 19 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 20 (OCR)

BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
NBD
A-A
OUTER PIN
INNER PIN
ANTIROTATION PLATE
INBOARD SPACER
INBD
B-B  3045089
ICN-B787-A-000061-A-81205-19487-A-01-1
Figure 2
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 20 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 21

ICN-B787-A-000061-A-81205-19488-A-01-1
Figure 3
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 21 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 22 (OCR)

A BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
0.161
0.091
O FRAING
O PUTER
DLOCKRING
~ NUT  OUTBOARD
1) OUTBOARD  SPACER
INBD
CORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER  U FITTING  • TRAP
U LOCKRING
OUTBOARD
NUT
OUTBOARD
SPACER
INCORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER, BUT LOCKRING
POINTING OUTWARDS
INBD
ICN-B787-A-000061-A-81205-19489-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 22 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 23

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1182W6402-5OUTBOARD SPACERInspect1
*[1]*[2]1182W6404-4LOCKRINGInspect
*[1]*[3]*[2]*[4]1182W6404-1OUTBOARD NUTInspect
*[1]*[3]*[2]*[4]1182W6405-1TRAP FITTINGInspect
*[1]*[2]1311Z6402-5OUTER PINInspect
*[3]*[4]1311Z6402-5OUTER PINInspect2
*[3]*[4]1311Z6401-5INNER PINInspect
*[3]*[4]1-ANTIROTATION PLATEInspect
*[3]*[4]1182W6402-4INBOARD SPACERInspect
*[1]  Do a detailed inspection of the left side horizontal stabilizer pivot pin assembly for misalignment.
*[2]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[3]  Do a detailed inspection of the left side horizontal stabilizer pivot pin assembly for incorrect gapping.
*[4]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the inner pin
and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 23 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 24

Task 2 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
REPLACEMENT [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 24 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 25 (OCR)

ABOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
3045093
ICN-B787-A-000061-A-81205-19490-A-01-1
Figure 1
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 25 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 26

ICN-B787-A-000061-A-81205-19491-A-01-1
Figure 2
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 26 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 27 (OCR)

Q BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
(11) OUTER
PIN  (16) INBOARD
SPACER
21) INBOARD FITTING  PIVOT BULKHEAD  NUT  BEARING  10/12 OUTBOARD  SPACER
13) LOCKRING
ĐD INNER
(5) 15)
RETAINING
BOLT
INBOARD 8  OUTBOARD 8 11  WASHER
WASHER
(4  19, 20
) ANTIROTATION  PLATE  NUT  OUTBOARD  TRAP  FITTING
1 18) INBOARD  NUT  INBD
B-B  3045095
ICN-B787-A-000061-A-81205-19492-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 27 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 28

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Remove1
*[1]1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Remove
*[1]1BACP18BC02A06HPIN, COTTER (SPLIT)Remove
*[1]1182W6404-5INBOARD NUTRemove
*[1]1NAS1149C0932RWASHER, FLATRemove
From the antirota-
tion plate to the
pivot bulkhead
inboard fitting
nut. *[2]
--LOCKWIRERemove2
*[1]1-ANTIROTATION PLATERemove/Keep3
From the trap fit-
ting to the out-
board nut. *[3]
--LOCKWIRERemove4
*[4]*[1]1182W6405-1TRAP FITTINGRemove5
*[4]*[1]1182W6401-5RETAINING BOLTRemove
*[1]1311Z6401-5INNER PINRemove6
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 28 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 29

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1182W6404-1OUTBOARD NUTRemove7
*[1]1182W6404-4LOCKRINGRemove
*[5]*[1]1311Z6402-5OUTER PINRemove8
*[1]1182W6404-3OUTBOARD WASHERRemove
*[1]1182W6404-3INBOARD WASHERRemove
*[1]1182W6402-4INBOARD SPACERRemove9
*[1]1182W6402-5OUTBOARD SPACERRemove10
*[6]*[1]1182W6404-3INBOARD WASHERInstall (New)11
*[6]*[1]1182W6404-3OUTBOARD WASHERInstall (New)
*[6]*[7]*[1]1182W6402-4INBOARD SPACERInstall (New)
*[6]*[8]*[1]1311Z6402-5OUTER PINInstall (New)
*[6]*[7]*[1]1182W6402-5OUTBOARD SPACERInstall (New)12
*[6]*[1]1182W6404-4LOCKRINGInstall (New)13
*[6]*[1]1182W6404-1OUTBOARD NUTInstall (New)
*[6]*[1]1311Z6401-5INNER PINInstall (New)14
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 29 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 30

Table 1  
More DataQtyIdentificationNameActionStep
*[9]1BACB30NM3DK18BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)15
Under the bolt
head. *[9]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[6]*[1]1182W6405-1TRAP FITTINGInstall (New)
*[6]*[1]1182W6401-5RETAINING BOLTInstall (New)
Under the castel-
lated nut. *[9]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[9]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[10]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[6]*[11]*[1]1-ANTIROTATION PLATEInstall (Kept)16
*[12]1182W6402-4INBOARD SPACERTurn
*[13]--TORQUEApply17
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 30 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 31

Table 1  
More DataQtyIdentificationNameActionStep
Under the in-
board nut. *[6]*[1]
1NAS1149C0932RWASHER, FLATInstall (New)18
*[6]*[1]1182W6404-5INBOARD NUTInstall (New)
*[14]--TORQUEApply
*[9]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)
Under the bolt
head. *[9]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
Under the castel-
lated nut. *[9]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[9]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[10]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[15]--TORQUEApply19
From the trap fit-
ting to the out-
board nut. *[16]
-MS20995NC51LOCKWIREInstall (New)20
From the antirota-
tion plate to the
pivot bulkhead
inboard fitting
nut. *[17]
-MS20995NC51LOCKWIREInstall (New)21
*[1]  Refer to 787 AMM 55-17-01 as an accepted procedure.
*[2]  Remove the lockwire currently installed from the antirotation plate to the pivot bulkhead inboard fitting nut. Refer to 787 AMM 20-10-
23, Lockwire - Removal, as an accepted procedure.
*[3]  Remove the lockwire currently installed from the trap fitting to the outboard nut. Refer to 787 AMM 20-10-23, Lockwire - Removal, as
an accepted procedure.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 31 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 32

Table 1  
*[4]  Trap fitting and retaining bolt will be removed as one unit along with bolt (BACB30NM3DK18), 2 washers (BACW10BP3CK), nut
(BACN10JD3ASU) and cotter pin (BACP18BC02A06H).
*[5]  Remove the outer pin with care to prevent the outer pin threads causing damage to the pivot bearing.
*[6]  Before installation, apply a continuous layer of BMS3-33 grease to the pivot pin assembly parts. After installation, make sure there is
grease squeeze out from the pivot pin assembly parts. Refer to SOPM 20-50-07, Lubrication, as an accepted procedure.
*[7]  Make sure the spacer is set flush against the washer and pivot bearing.
*[8]  Install the new outer pin with care to prevent the pin threads causing damage to the pivot bearing.
*[9]  Refer to SOPM 20-50-01, Bolt and Nut Installation, as an accepted procedure.
*[10]  Refer to SOPM 20-50-02, Installation of Safetying Devices, as an accepted procedure.
*[11]  Make sure the antirotation plate is engaged with pivot bulkhead pivot fitting antirotation clip.
*[12]  Turn the threaded inboard spacer until it is fully engaged with the pivot bulkhead inboard fitting nut and engaged in the slots of the
antirotation plate.
*[13]  Apply 75-100 in-lbs torque to the outboard nut. Make sure the lockring is engaged in the slots of the outer pin and in the slots of the
outboard spacer before final torque is applied to the outboard nut. Loosen the outboard nut one turn then apply 25-30 in-lbs final torque.
*[14]  Apply a minimum of 200 in-lbs initial torque to the inboard nut. Apply a maximum of 400 in-lbs torque to the inboard nut until it aligns
with the next slot in the retaining bolt.
*[15]  Apply 500-700 in-lbs torque to the trap fitting.
*[16]  Install new lockwire from the trap fitting to the outboard nut. The outboard nut may turn up to 10 degrees during lockwire installation.
Install the lockwire using the double twist method. Refer to SOPM 20-50-02, Installation of Safetying Devices, as an accepted procedure.
*[17]  Install new lockwire from the pivot bulkhead inboard fitting nut to the antirotation plate. Install the lockwire using the double twist method.
Refer to SOPM 20-50-02, Installation of Safetying Devices, as an accepted procedure.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 32 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 33

Task 3 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
DETAILED INSPECTION [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 33 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 34 (OCR)

_BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
3045096
ICN-B787-A-000061-A-81205-19493-A-01-1
Figure 1
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 34 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 35 (OCR)

BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
B
A-A
OUTER PIN
• INNER PIN
• ANTIROTATION PLATE
2 INBOARD SPACER
INBD
B-B
ICN-B787-A-000061-A-81205-19494-A-01-1
Figure 2
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 35 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 36

ICN-B787-A-000061-A-81205-19495-A-01-1
Figure 3
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 36 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 37 (OCR)

A BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
0.161
0.091
TRAP
FITTING 1
OUTER (1  PIN
LOCKRING 1
ION  OUIBOARD 1A
INBD
CORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER
TRAP
FITTING
LOCKRING(
OUTBOARD
NUT
OUTBOARD(
SPACER
INCORRECT INSTA  LATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER, BUT LOCKRING
INBD  POINTING OUTWARDS
ICN-B787-A-000061-A-81205-19496-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 37 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 38

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1182W6402-5OUTBOARD SPACERInspect1
*[1]*[2]1182W6404-4LOCKRINGInspect
*[1]*[3]*[2]*[4]1182W6404-1OUTBOARD NUTInspect
*[1]*[3]*[2]*[4]1182W6405-1TRAP FITTINGInspect
*[1]*[2]1311Z6402-5OUTER PINInspect
*[3]*[4]1311Z6402-5OUTER PINInspect2
*[3]*[4]1311Z6401-5INNER PINInspect
*[3]*[4]1-ANTIROTATION PLATEInspect
*[3]*[4]1182W6402-6INBOARD SPACERInspect
*[1]  Do a detailed inspection of the right side horizontal stabilizer pivot pin assembly for misalignment.
*[2]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[3]  Do a detailed inspection of the right side horizontal stabilizer pivot pin assembly for incorrect gapping.
*[4]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the inner pin
and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 38 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 39

Task 4 – RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
REPLACEMENT [Group 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 1.
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 39 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 40 (OCR)

_BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
3045100
ICN-B787-A-000061-A-81205-19497-A-01-1
Figure 1
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 40 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 41

ICN-B787-A-000061-A-81205-19498-A-01-1
Figure 2
RIGHT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 41 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 42 (OCR)

O BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
SPACER  OUTBOARD (9  (10  15 INBOARD
SPACER
BEARING
LOCKRING 6)  12
RETAINING  7/10 OUTER  PIN
BOLT
14)  13) INNER
PIN
X17)
INBOARD
NUT
3 4  (15
TRAP  OUTBOARD  INBOARL  ANTIROTATION
FITTING  WASHER  NASHER  PLATE
3 6 12 16 19
OUTBOARD  INBD
NUT
B-B  3045102
ICN-B787-A-000061-A-81205-19499-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 42 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 43

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Remove1
*[1]1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Remove
*[1]1BACP18BC02A06HPIN, COTTER (SPLIT)Remove
*[1]1182W6404-5NUT INBOARDRemove
*[1]1NAS1149C0932RWASHER, FLATRemove
*[1]1-ANTIROTATION PLATERemove/Keep2
From the trap fit-
ting to the out-
board nut. *[2]
--LOCKWIRERemove3
*[3]*[1]1182W6405-1TRAP FITTINGRemove4
*[3]*[1]1182W6401-5RETAINING BOLTRemove
*[1]1311Z6401-5INNER PINRemove5
*[1]1182W6404-1OUTBOARD NUTRemove6
*[1]1182W6404-4LOCKRINGRemove
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 43 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 44

Table 1  
More DataQtyIdentificationNameActionStep
*[4]*[1]1311Z6402-5OUTER PINRemove7
*[1]1182W6404-3OUTBOARD WASHERRemove
*[1]1182W6404-3INBOARD WASHERRemove
*[1]1182W6402-6INBOARD SPACERRemove8
*[1]1182W6402-5OUTBOARD SPACERRemove9
*[5]*[1]1182W6404-3INBOARD WASHERInstall (New)10
*[5]*[1]1182W6404-3OUTBOARD WASHERInstall (New)
*[5]*[6]*[1]1182W6402-6INBOARD SPACERInstall (New)
*[5]*[7]*[1]1311Z6402-5OUTER PINInstall (New)
*[5]*[6]*[1]1182W6402-5OUTBOARD SPACERInstall (New)11
*[5]*[1]1182W6404-4LOCKRINGInstall (New)12
*[5]*[1]1182W6404-1OUTBOARD NUTInstall (New)
*[5]*[1]1311Z6401-5INNER PINInstall (New)13
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 44 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 45

Table 1  
More DataQtyIdentificationNameActionStep
*[8]1BACB30NM3DK18BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)14
Under the bolt
head. *[8]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[5]*[1]1182W6405-1TRAP FITTINGInstall (New)
*[5]*[1]1182W6401-5RETAINING BOLTInstall (New)
Under the castel-
lated nut. *[8]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[8]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[9]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[5]*[10]*[1]1-ANTIROTATION PLATEInstall (Kept)15
*[11]1182W6402-6INBOARD SPACERTurn
*[12]--TORQUEApply16
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 45 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 46

Table 1  
More DataQtyIdentificationNameActionStep
Under the in-
board nut. *[5]*[1]
1NAS1149C0932RWASHER, FLATInstall (New)17
*[5]*[1]1182W6404-5INBOARD NUTInstall (New)
*[13]--TORQUEApply
*[8]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)
Under the bolt
head. *[8]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
Under the castel-
lated nut. *[8]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[8]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[9]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[14]--TORQUEApply18
From the trap fit-
ting to the out-
board nut. *[15]
-MS20995NC51LOCKWIREInstall (New)19
*[1]  Refer to 787 AMM 55-17-01 as an accepted procedure.
*[2]  Remove the lockwire currently installed from the trap fitting to the outboard nut. Refer to 787 AMM 20-10-23, Lockwire - Removal, as
an accepted procedure.
*[3]  Trap fitting and retaining bolt will be removed as one unit along with bolt (BACB30NM3DK18), 2 washers (BACW10BP3CK), nut
(BACN10JD3ASU) and cotter pin (BACP18BC02A06H).
*[4]  Remove the outer pin with care to prevent the outer pin threads causing damage to the pivot bearing.
*[5]  Before installation, apply a continuous layer of BMS3-33 grease to the pivot pin assembly parts. After installation, make sure there is
grease squeeze out from the pivot pin assembly parts. Refer to SOPM 20-50-07, Lubrication, as an accepted procedure.
*[6]  Make sure the spacer is set flush against the washer and pivot bearing.
*[7]  Install the new outer pin with care to prevent the pin threads causing damage to the pivot bearing.
*[8]  Refer to SOPM 20-50-01, Bolt and Nut Installation, as an accepted procedure.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 46 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 47

Table 1  
*[9]  Refer to SOPM 20-50-02, Installation of Safetying Devices, as an accepted procedure.
*[10]  Make sure the antirotation plate is engaged with pivot bulkhead pivot fitting antirotation clip.
*[11]  Turn the inboard spacer until it is engaged in the slots of the antirotation plate.
*[12]  Apply 75-100 in-lbs torque to the outboard nut. Make sure the lockring is engaged in the slots of the outer pin and in the slots of the
outboard spacer before final torque is applied to the outboard nut. Loosen the outboard nut one turn then apply 25-30 in-lbs final torque.
*[13]  Apply a minimum of 200 in-lbs initial torque to the inboard nut. Apply a maximum of 400 in-lbs torque to the inboard nut until it aligns
with the next slot in the retaining bolt.
*[14]  Apply 500-700 in-lbs torque to the trap fitting.
*[15]  Install new lockwire from the trap fitting to the outboard nut. The outboard nut may turn up to 10 degrees during lockwire installation.
Install the lockwire using the double twist method. Refer to SOPM 20-50-02, Installation of Safetying Devices, as an accepted procedure.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 47 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 48

Task 5 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
DETAILED INSPECTION [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 2.
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 48 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 49 (OCR)

ABOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
3045103
ICN-B787-A-000061-A-81205-19500-A-01-1
Figure 1
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 49 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 50 (OCR)

BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
NBD
A-A
OUTER PIN
INNER PIN
ANTIROTATION PLATE
INBOARD SPACER
INBD
B-B  3045104
ICN-B787-A-000061-A-81205-19501-A-01-1
Figure 2
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 50 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 51

ICN-B787-A-000061-A-81205-19502-A-01-1
Figure 3
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - DETAILED INSPECTION
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 51 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 52 (OCR)

A BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
0.161
0.091
O FRAING
O PUTER
DLOCKRING
~ NUT  OUTBOARD
1) OUTBOARD  SPACER
INBD
CORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER  U FITTING  • TRAP
U LOCKRING
OUTBOARD
NUT
OUTBOARD
SPACER
INCORRECT INSTALLATION EXAMPLE:
LOCKRING ENGAGED WITH OUTER PIN
AND OUTBOARD SPACER, BUT LOCKRING
POINTING OUTWARDS
INBD
ICN-B787-A-000061-A-81205-19503-A-01-1
Figure 4
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 52 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 53

Table 1  
More DataQtyIdentificationNameActionStep
*[1]*[2]1182W6402-5OUTBOARD SPACERInspect1
*[1]*[2]1182W6404-4LOCKRINGInspect
*[1]*[3]*[2]*[4]1182W6404-1OUTBOARD NUTInspect
*[1]*[3]*[2]*[4]1313Z6455-501TRAP FITTINGInspect
*[1]*[2]1311Z6402-5OUTER PINInspect
*[3]*[4]1311Z6402-5OUTER PINInspect2
*[3]*[4]1311Z6401-5INNER PINInspect
*[3]*[4]1311Z6460-501ANTIROTATION-
PLATE
Inspect
*[3]*[4]1182W6402-4INBOARD SPACERInspect
*[1]  Do a detailed inspection of the right side horizontal stabilizer pivot pin assembly for misalignment.
*[2]  Misalignment is defined as having the pivot pin lockring pointing outwards, or not engaged to the outer pin and outer spacer.
*[3]  Do a detailed inspection of the right side horizontal stabilizer pivot pin assembly for incorrect gapping.
*[4]  Incorrect gapping is defined as having any gap between the antirotation plate and the outer pin, having a gap between the inner pin
and inboard spacer, or not having a 0.161 - 0.091 inches gap from the outboard nut to the trap fitting.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 53 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 54

Task 6 – LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY -
REPLACEMENT [Group 2: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
This Task applies only to: Group 2.
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 54 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 55 (OCR)

ABOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
HORIZONTAL STABILIZER CENTER BOX
(VIEW LOOKING AFT)
3045107
ICN-B787-A-000061-A-81205-19504-A-01-1
Figure 1
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 55 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 56

ICN-B787-A-000061-A-81205-19505-A-01-1
Figure 2
LEFT SIDE HORIZONTAL STABILIZER PIVOT PIN ASSEMBLY - REPLACEMENT
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 56 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 57 (OCR)

Q BOEING  B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN
(11) OUTER
PIN  (16) INBOARD
SPACER
21) INBOARD FITTING  PIVOT BULKHEAD  NUT  BEARING  10/12 OUTBOARD  SPACER
13) LOCKRING
(5) 15)
RETAINING
BOLT
INBOARD 8  OUTBOARD 8 11  WASHER
WASHER
(4  19, 20
) ANTIROTATION  PLATE  NUT  OUTBOARD  TRAP  FITTING
1 18) INBOARD  NUT  INBD
B-B
ICN-B787-A-000061-A-81205-19506-A-01-1
Figure 3
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Task. The QTY
numbers shown below are the number of parts necessary for this Task.
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
Page 57 of 77
Export Controlled ECCN: 9E991
See page 1 for details

### Page 58

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1BACB30NM3DK19BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Remove1
*[1]1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Remove
*[1]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Remove
*[1]1BACP18BC02A06HPIN, COTTER (SPLIT)Remove
*[1]1182W6404-5INBOARD NUTRemove
*[1]1NAS1149C0932RWASHER, FLATRemove
From the antirota-
tion plate to the
pivot bulkhead
inboard fitting
nut. *[2]
--LOCKWIRERemove2
*[1]1-ANTIROTATION PLATERemove/Keep3
From the trap fit-
ting to the out-
board nut. *[3]
--LOCKWIRERemove4
*[4]*[1]1313Z6455-501TRAP FITTINGRemove5
*[4]*[1]1182W6401-5RETAINING BOLTRemove
*[1]1311Z6401-5INNER PINRemove6
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 58 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 59

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1182W6404-1OUTBOARD NUTRemove7
*[1]1182W6404-4LOCKRINGRemove
*[5]*[1]1311Z6402-5OUTER PINRemove8
*[1]1313Z6440-503OUTBOARD WASHERRemove
*[1]1313Z6440-503INBOARD WASHERRemove
*[1]1182W6402-4INBOARD SPACERRemove9
*[1]1182W6402-5OUTBOARD SPACERRemove10
*[6]*[1]1313Z6440-503INBOARD WASHERInstall (New)11
*[6]*[1]1313Z6440-503OUTBOARD WASHERInstall (New)
*[6]*[7]*[1]1182W6402-4INBOARD SPACERInstall (New)
*[6]*[8]*[1]1311Z6402-5OUTER PINInstall (New)
*[6]*[7]*[1]1182W6402-5OUTBOARD SPACERInstall (New)12
*[6]*[1]1182W6404-4LOCKRINGInstall (New)13
*[6]*[1]1182W6404-1OUTBOARD NUTInstall (New)
*[6]*[1]1311Z6401-5INNER PINInstall (New)14
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 59 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 60

Table 1  
More DataQtyIdentificationNameActionStep
*[9]1BACB30NM3DK18BOLT, HEX HEAD, 160
KSI MIN TENSILE, LONG
THREAD, 6AL-4V TITANI-
UM, NONLOCKING AND
SELF-LOCKING (NOMI-
NAL AND OVERSIZE)
Install (New)15
Under the bolt
head. *[9]
1BACW10BP3CKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[6]*[1]1182W6405-1TRAP FITTINGInstall (New)
*[6]*[1]1182W6401-5RETAINING BOLTInstall (New)
Under the castel-
lated nut. *[9]
1BACW10BP3PKWASHER, PLAIN AND
COUNTERSUNK (NOMI-
NAL, .0156 AND .0312
OVERSIZE) ALLOY
STEEL AND CRES
Install (New)
*[9]1BACN10JD3ASUNUT, CASTELLATED,
HEX, 80 KSI, 125 KSI,
AND 160 KSI, 450 DEG F
AND 900 DEG F
Install (New)
*[10]1BACP18BC02A06HPIN, COTTER (SPLIT)Install (New)
*[6]*[11]*[1]1313Z6455-501ANTIROTATION PLATEInstall (Kept)16
*[12]1182W6402-4INBOARD SPACERTurn
*[13]--TORQUEApply17
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00
AM
Page 60 of 77
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB550013-00 RB
Issue 001, 30 Aug 2024 12:00:00 AM
REQUIREMENTS BULLETIN

The text continues at https://openairdocs.org/service-documents/boeing/b787-81205-sb550013-00-rb/file/c2a5136ae11e.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
