# Boeing Alert Requirements Bulletin B787-81205-SB570048-00 RB

Copy: Revision 001 ("RB-787-57A0048-01--reduced"), 180 pages: PDF https://openairdocs.org/files/sha256/a9/1b/a91b92047e412fda4be6a8f811ccfb83248e854d23bdd7762a7ffac1626d0c23; text https://openairdocs.org/service-documents/boeing/b787-81205-sb570048-00-rb/file/a91b92047e41.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-2295; AD 2026-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB570048-00 RB
- Latest revision known: B787-81205-SB570048-00 RB, Issue 001, dated August 11, 2025 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb570048-00-rb

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-17-02](https://openairdocs.org/ad/2026-17-02.md), effective Oct 1, 2026: Revision 001

## Text (180 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-2295; AD 2026-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB570048-00 RB WINGS - Center
Wing - Lower Side of Body Splice Plate and Wing Structure Inspection
Copyright © 2025 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 1 of 180
Export Controlled ECCN: 9E991
See page 1 for details
4.0
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
TASK 1 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 AND SPLICE PLATE NO. 2 INSPECTION
FWD OF THE REAR SPAR TERMINAL FITTING [Group 1, 3, 5, 8] . . . . . . . . . . . . . . 130
TASK 2 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 INSPECTION FWD OF THE REAR SPAR
TERMINAL FITTING [Group 2, 4, 9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
TASK 3 – LEFT WING AND RIGHT WING - REAR SPAR TERMINAL FITTING INSPECTION [Group 1, 3, 5,
8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
TASK 4 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 INSPECTION AT THE REAR SPAR
TERMINAL FITTING [Group 1, 3, 5, 8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
TASK 5 – LEFT WING AND RIGHT WING - REAR SPAR TERMINAL FITTING INSPECTION [Group 2, 4, 6-7,
9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
TASK 6 – LEFT WING AND RIGHT WING - SPLICE PLATE NO. 1 INSPECTION AT THE REAR SPAR
TERMINAL FITTING [Group 2, 4, 6-7, 9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
TASK 7 – LEFT WING AND RIGHT WING - LOWER CHORD INSPECTION [Group 1, 3, 5, 8] . . . . . 160
TASK 8 – LEFT WING AND RIGHT WING - LOWER CHORD INSPECTION [Group 2, 9] . . . . . . . . 166
TASK 9 – LEFT WING AND RIGHT WING - FRONT SPAR TERMINAL FITTING INSPECTION [Group 7] . 172
TASK 10 – LEFT WING AND RIGHT WING - JACK PAD INSPECTION [Group 7] . . . . . . . . . . . . 177
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 2 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO
Alert:
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT
TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE
REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START"
AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS
(COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE
RELATED DOCUMENT.
A.
EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 46, 54, 60, 65, 72,
76, 81, 85, 91, 95, 100, 104, 109, 113, 119, 124-125, 129, 132, 135, 138, 140, 144-145, 150, 154,
158, 164, 168, 172, 176, 180, 184, 188, 192, 196, 269, 300, 304, 307, 317, 343, 347, 355, 363,
369, 379, 387, 409, 429, 437, 450, 455, 469, 476, 482, 489, 492, 508, 510, 533-534, 541, 556,
558, 563, 570, 572, 575, 577, 580, 582, 584, 587, 610, 629, 800 in 9 Group(s). Where the effectiv-
ity is presented with hyphens between line numbers, the airplane applicability means "through"
and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8 Airplane Line Numbers 437, 482 with pull up conditions that
result in reduced inspection thresholds and intervals
- 1
787-9 Airplane Line Numbers 455, 541 with pull up conditions that
result in reduced inspection thresholds and intervals
- 2
787-8 Airplane Line Numbers 317, 347, 489 with pull up conditions
that result in reduced inspection thresholds and intervals
- 3
787-9 Airplane Line Numbers 369, 379, 363, 533 with pull up conditions
that result in reduced inspection thresholds and intervals
- 4
787-8 Airplane Line Numbers 304, 307, 429 with pull up conditions
that result in reduced inspection thresholds and intervals
- 5
787-9 Airplane Line Numbers 409, 469, 492, 510, 629 with pull up
conditions that result in reduced inspection thresholds and intervals
- 6
787-10 Airplane Line Number 800 with pull up conditions that result
in reduced inspection thresholds and intervals
- 7
787-8 Airplane Line Numbers 46, 54, 60, 65, 72, 76, 81, 85, 91, 95,
100, 104, 109, 113, 119, 124, 125, 129, 132, 135, 138, 140, 144, 145,
150, 154, 158, 164, 168, 172, 176, 180, 184, 188, 192, 196, 300, 343,
387, 476, 508 with pull up conditions that result in reduced inspection
thresholds and intervals
- 8
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 3 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-9 Airplane Line Numbers 269, 355, 450, 534, 556, 558, 563, 570,
572, 575, 577, 580, 582, 584, 587, 610 with pull up conditions that
result in reduced inspection thresholds and intervals
- 9
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
8ZA123
8ZA187
8ZA237 - ZA241
8ZA243 - ZA245
3ZA251
8ZA265
8ZA267 - ZA268
8ZA292 - ZA294
8ZA342
8ZA384 - ZA389
8ZA431
8ZA433 - ZA434
8ZA467
8ZA469 - ZA474
8ZA515
8ZA539
8ZA656 - ZA657
5ZA662
GroupVariable Number
3ZA663
3ZA670
8ZA673
5ZA684
8ZA685
8ZA830
1ZA882 - ZA883
8ZA885
5ZA917
4ZB034
9ZB040
2ZB050
6ZB058
9ZB170
9ZB177
4ZB178
9ZB424
6ZB450
GroupVariable Number
9ZB453 - ZB455
9ZB457
6ZB566
9ZB576
4ZB604
9ZB618
9ZB648
9ZB658
2ZB679
9ZB697
4ZB703
9ZB705
9ZB733
6ZB764
6ZB786
9ZB790
7ZC041
--
2. Spares Affected
None.
B.
CONCURRENT REQUIREMENTS
None.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 4 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB570048-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB570048-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required actions, based on the applicable conditions in Tables 6 through 27 in accordance
with the Accomplishment Instructions.
Group 1:
Table 6  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Whichever occurs
first:
Whichever occurs
first:
ACTION 1: Do an Ul-
trasonic (UT) inspec-
tion of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
All Airplanes
1. Within 24 months
after the Issue 001
date of the Require-
ments Bulletin B787-
81205-SB570048-00
RB
1. Before 6,000 total
flight cycles
2. Before 40,500 to-
tal flight hours
3.Before the result of
6857.14 -
(0.095238*TFH)-TFC
is less than or equal
to zero.*[3]
ACTION 2: Do a De-
tailed Inspection
(DET) of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
2. Within 2,000 flight
cycles after the Issue
001 date of the Re-
quirements Bulletin
B787-81205-
SB570048-00 RB.
ACTION 3: Do a UT
inspection of Splice
Plate No. 1 at the
Rear Spar Terminal
Fitting for any crack.
*[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 5 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

Group 1:
Table 6  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
Whichever occurs
first:
-CONDITION 1 (AC-
TION 1): Repeat the
UT inspection of
Splice Plate No. 1
and Splice Plate No.
2 for any
crack.*[4]*[1]*[2]
CONDITION 1: NO
CRACK FOUND
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[5]-CONDITION 1 (AC-TION 2): Repeat the
DET of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack.*[4]*[1]*[2]
-CONDITION 1 (AC-
TION 3): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[4]*[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 6 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

Group 1:
Table 6  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 2 (AC-
TION 1): Contact
The Boeing Compa-
ny for repair instruc-
tions and do the re-
pair.
CONDITION 2: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 2 (AC-
TION 2): Repeat the
UT inspection of
Splice Plate No. 1
and Splice Plate No.
2 for any
crack.*[4]*[1]*[2]
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[5]-CONDITION 2 (AC-TION 3): Repeat the
DET of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack.*[4]*[1]*[2]
-CONDITION 2 (AC-
TION 4): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[4]*[1]
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[3]  TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[4]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[5]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 7 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

Group 1:
Table 7  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
57,391.30 -
(0.492754*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
Whichever occurs
first:
-CONDITION 3 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[3]
CONDITION 3: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 3 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 4 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 4: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 4 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack *[3]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 4 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 8 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Group 1:
Table 7  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[4]  
FH = Flight Hours. FC = Flight Cycles.
Group 1:
Table 8  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT)
 Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[2]*[3]
3. Before the result of
53,086.96 -
(0.405797*TFH) - TFC is
less than or equal to ze-
ro. *[1]ACTION 3: Do a DetailedInspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[2]*[3]
Whichever occurs
first:
-CONDITION 5 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[4]
CONDITION 5: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 5 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[4]*[2]*[3]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[5]CONDITION 5 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[4]*[2]*[3]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 9 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Group 1:
Table 8  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT)
 Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 6 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 6: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 6 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack. *[4]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 6 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[4]*[2]*[3]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[5]CONDITION 6 (ACTION
4): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[4]*[2]*[3]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[4]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[5]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 10 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Group 2:
Table 9  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Whichever occurs
first:
Whichever occurs
first:
ACTION 1: Do an Ul-
trasonic (UT) inspec-
tion of Splice Plate
No. 1 for any crack.
*[1]
All Airplanes
1. Within 24 months
after the Issue 001
date of the Require-
ments Bulletin B787-
81205-SB570048-00
RB
1. Before 6,000 total
flight cycles
2. Before 40,500 to-
tal flight hours
3.Before the result of
6857.14 -
(0.095238*TFH)-TFC
is less than or equal
to zero.*[2]
ACTION 2: Do a UT
inspection of Splice
Plate No. 1 at the
Rear Spar Terminal
Fitting for any crack.
*[1]
2. Within 2,000 flight
cycles after the Issue
001 date of the Re-
quirements Bulletin
B787-81205-
SB570048-00 RB
Whichever occurs
first:
-CONDITION 7 (AC-
TION 1): Repeat the
UT inspection of
Splice Plate No. 1 for
any crack.*[3]*[1]
CONDITION 7: NO
CRACK FOUND
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[4]
-CONDITION 7 (AC-
TION 2): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[3]*[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 11 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

Group 2:
Table 9  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 8 (AC-
TION 1): Contact
The Boeing Compa-
ny for repair instruc-
tions and do the re-
pair.
CONDITION 8: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 8 (AC-
TION 2): Repeat the
UT inspection of
Splice Plate No. 1 for
any crack. *[3]*[1]
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[4]
-CONDITION 8 (AC-
TION 3): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[3]*[1]
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 12 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

Group 2:
Table 10  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
57,391.30 -
(0.492754*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
Whichever occurs
first:
-CONDITION 9 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[3]
CONDITION 9: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 9 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 10 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 10: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 10 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[3]
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 10 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 13 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

Group 2:
Table 10  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[4]  
FH = Flight Hours. FC = Flight Cycles.
Group 2:
Table 11  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1
for any crack.*[2] 3. Before the result of53,086.96 -
(0.405797*TFH) - TFC is
less than or equal to ze-
ro. *[1]
Whichever occurs
first:
-CONDITION 11 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[3]
CONDITION 11: NO
CRACK FOUND
1. 18,000 flight cy-
cles
2. 54,000 flight
hoursCONDITION 11 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack.*[3]*[2]
3. Before the result
of 88,000.00 -
(1.555556*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 12 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 12: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 12 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack. *[3]
1. 18,000 flight cy-
cles
2. 54,000 flight
hoursCONDITION 12 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack.*[3]*[2]
3. Before the result
of 88,000.00 -
(1.555556*FH) -
FC is less than or
equal to zero. *[4]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 14 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

Group 2:
Table 11  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
Group 3:
Table 12  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and
 Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
All Airplanes
1. Before 18,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
21,818.18 -
(0.141414*TFH) - TFC is
less than or equal to ze-
ro. *[3]
ACTION 2: Do a Detailed
Inspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
ACTION 3: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 15 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16

Group 3:
Table 12  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and
 Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
Whichever occurs
first:
-CONDITION 13 (ACTION
1): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[4]*[1]*[2]
CONDITION 13: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hours
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[5]
CONDITION 13 (ACTION
2): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[4]*[1]*[2]
CONDITION 13 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[4]*[1]
-Before further flight.CONDITION 14 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 14: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 14 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack. *[4]*[1]*[2]
1. 6,000 flight cy-
cles
2. 40,500 flight
hours
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[5]
CONDITION 14 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[4]*[1]*[2]
CONDITION 14 (ACTION
4): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[4]*[1]
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 16 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 17

Group 3:
Table 12  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and
 Detailed Inspection (DET)
*[3]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[4]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[5]  FH = Flight Hours. FC = Flight Cycles.
Group 3:
Table 13  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
57,391.30 -
(0.492754*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
Whichever occurs
first:
-CONDITION 15 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[3]
CONDITION 15: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 15 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 17 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Group 3:
Table 13  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 16 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 16: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 16 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[3]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 16 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
Group 3:
Table 14  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
All Airplanes
1. Before 30,000 total
flight cycles
2. Before 101,250 total
flight hours.ACTION 2: Do a UT inspec-tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack. *[1]*[2]
ACTION 3: Do a Detailed
Inspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any crack.
*[1]*[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 18 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19

Group 3:
Table 14  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
Whichever occurs
first:
-CONDITION 17 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[3]
CONDITION 17: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 17 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[1]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]CONDITION 17 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[1]*[2]
-Before further flight.CONDITION 18 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 18: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 18 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[3]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 18 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[1]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]CONDITION 18 (ACTION
4): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[1]*[2]
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 19 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 20

Group 3:
Table 14  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  
FH = Flight Hours. FC = Flight Cycles.
Group 4:
Table 15  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of Splice
Plate No. 1 for any crack.
All Airplanes
1. Before 18,000 total
flight cycles
2. Before 101,250 total
flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
3. Before the result of
21,818.18 -
(0.141414*TFH) - TFC is
less than or equal to ze-
ro. *[1]
Whichever occurs
first:
-CONDITION 19 (ACTION
1): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack.*[3]
CONDITION 19: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 19 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 20 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 21

Group 4:
Table 15  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 20 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 20: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 20 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack. *[3]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 20 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
Group 4:
Table 16  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
57,391.30 -
(0.492754*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 21 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 22

Group 4:
Table 16  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
Whichever occurs
first:
-CONDITION 21 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[3]
CONDITION 21: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 21 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 22 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 22: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 22 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[3]
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 22 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 22 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 23

Group 5:
Table 17  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 20,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
25,263.16 -
(0.175439*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.
Whichever occurs
first:
-CONDITION 23 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[2]
CONDITION 23: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 23 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[3]
-Before further flight.CONDITION 24 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 24: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 24 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[2]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 24 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[3]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 23 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 24

Group 5:
Table 17  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[3]  
FH = Flight Hours. FC = Flight Cycles.
Group 5:
Table 18  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[2]
3. Before the result of
53,086.96 -
(0.405797*TFH) - TFC is
less than or equal to ze-
ro. *[1]ACTION 3: Do a DetailedInspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[2]
Whichever occurs
first:
-CONDITION 25 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[3]
CONDITION 25: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 25 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]CONDITION 25 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 24 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 25

Group 5:
Table 18  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 26 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 26: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 26 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack. *[3]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 26 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]CONDITION 26 (ACTION
4): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[2]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 25 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 26

Group 6:
Table 19  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 24,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
33,103.45 -
(0.252874*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.
Whichever occurs
first:
-CONDITION 27 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[2]
CONDITION 27: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 27 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[3]
-Before further flight.CONDITION 28 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 28: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 28 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[2]
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 28 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[3]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 26 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 27

Group 6:
Table 19  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[3]  
FH = Flight Hours. FC = Flight Cycles.
Group 7:
Table 20  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 31,000 total
flight cycles
2. Before 86,250 total
flight hours
3. Before the result of
57,174.53 -
(0.562893*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.
Whichever occurs
first:
-CONDITION 29 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[2]
CONDITION 29: NO
CRACK FOUND
1. 5,000 flight cy-
cles
2. 40,000 flight
hoursCONDITION 29 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]
3. Before the result
of 5,454.55 -
(0.0363636*FH) -
FC is less than or
equal to zero. *[3]
-Before further flight.CONDITION 30 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 30: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 30 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[2]
1. 5,000 flight cy-
cles
2. 40,000 flight
hoursCONDITION 30 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]
3. Before the result
of 5,454.55 -
(0.0363636*FH) -
FC is less than or
equal to zero. *[3]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 27 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 28

Group 7:
Table 20  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[3]  FH = Flight Hours. FC = Flight Cycles.
Group 7:
Table 21  Left Wing and Right Wing - Front Spar Terminal Fitting and Jack Pad Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Front Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 31,000 total
flight cycles
2. Before 86,250 total
flight hours
3. Before the result of
57,174.53 -
(0.562893*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of the Jack Pad for any
crack.
Whichever occurs
first:
-CONDITION 31 (ACTION
1): Repeat the UT inspec-
tion of the Front Spar Ter-
minal Fitting for any
crack.*[2]
CONDITION 31: NO
CRACK FOUND
1. 12,000 flight cy-
cles
2. 40,000 flight
hours
3. Before the result
of 36,000.00 -
(0.800000*FH) -
FC is less than or
equal to zero. *[3]
CONDITION 31 (ACTION
2): Repeat the UT inspec-
tion of the Jack Pad for any
crack.*[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 28 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 29

Group 7:
Table 21  Left Wing and Right Wing - Front Spar Terminal Fitting and Jack Pad Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 32 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 32: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 32 (ACTION
2): Repeat the UT inspec-
tion of the Front Spar Ter-
minal Fitting for any crack.
*[2]
1. 12,000 flight cy-
cles
2. 40,000 flight
hours
3. Before the result
of 36,000.00 -
(0.800000*FH) -
FC is less than or
equal to zero. *[3]
CONDITION 32 (ACTION
3): Repeat the UT inspec-
tion of the Jack Pad for any
crack.*[2]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[3]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 29 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 30

Group 8:
Table 22  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Whichever occurs
first:
Whichever occurs
first:
ACTION 1: Do an Ul-
trasonic (UT) inspec-
tion of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack. *[1]*[2]
All Airplanes
1. Within 24 months
after the Issue 001
date of the Require-
ments Bulletin B787-
81205-SB570048-00
RB
1. Before 6,000 total
flight cycles
2. Before 40,500 to-
tal flight hours
ACTION 2: Do a De-
tailed Inspection
(DET) of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack. *[1]*[2]
2. Within 2,000 flight
cycles after the Issue
001 date of the Re-
quirements Bulletin
B787-81205-
SB570048-00 RB
ACTION 3: Do a UT
inspection of Splice
Plate No. 1 at the
Rear Spar Terminal
Fitting for any crack.
*[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 30 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 31

Group 8:
Table 22  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
Whichever occurs
first:
-CONDITION 33 (AC-
TION 1): Repeat the
UT inspection of
Splice Plate No. 1
and Splice Plate No.
2 for any
crack.*[3]*[1]*[2]
CONDITION 33: NO
CRACK FOUND
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[4]-CONDITION 33:(ACTION 2): Repeat
the DET of Splice
Plate No. 1 and
Splice Plate No. 2 for
any crack.*[3]*[1]*[2]
-CONDITION 33 (AC-
TION 3): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[3]*[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 31 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 32

Group 8:
Table 22  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 34 (AC-
TION 1): Contact
The Boeing Compa-
ny for repair instruc-
tions and do the re-
pair.
CONDITION 34:
ANY CRACK
FOUND
Whichever occurs
first:
-CONDITION 34 (AC-
TION 2): Repeat the
UT inspection of
Splice Plate No. 1
and Splice Plate No.
2 for any crack.
*[3]*[1]*[2]
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[4]-CONDITION 34 (AC-TION 3): Repeat the
DET of Splice Plate
No. 1 and Splice
Plate No. 2 for any
crack.*[3]*[1]*[2]
-CONDITION 34 (AC-
TION 4): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[3]*[1]
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 32 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 33

Group 8:
Table 23  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 20,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
25,263.16 -
(0.175439*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
Whichever occurs
first:
-CONDITION 35 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[3]
CONDITION 35: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 35 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 36 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 36: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 36 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[3]
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 36 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 33 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 34

Group 8:
Table 23  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[4]  
FH = Flight Hours. FC = Flight Cycles.
Group 8:
Table 24  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[2]*[3]
3. Before the result of
53,086.96 -
(0.405797*TFH) - TFC is
less than or equal to ze-
ro. *[1]ACTION 3: Do a DetailedInspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[2]*[3]
Whichever occurs
first:
-CONDITION 37 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[4]
CONDITION 37: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 37 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[4]*[2]*[3]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[5]CONDITION 37 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[4]*[2]*[3]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 34 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 35

Group 8:
Table 24  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic 
(UT) Inspection and Detailed Inspection (DET)
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 38 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 38: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 38 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack. *[4]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 38 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[4]*[2]*[3]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[5]CONDITION 38 (ACTION
4): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[4]*[2]*[3]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[4]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[5]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 35 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 36

Group 9:
Table 25  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Whichever occurs
first:
Whichever occurs
first:
ACTION 1: Do an Ul-
trasonic (UT) inspec-
tion of Splice Plate
No. 1 for any crack.
*[1]
All Airplanes
1. Within 24 months
after the Issue 001
date of the Require-
ments Bulletin B787-
81205-SB570048-00
RB
1. Before 6,000 total
flight cycles
2. Before 40,500 to-
tal flight hours
ACTION 2: Do a UT
inspection of Splice
Plate No. 1 at the
Rear Spar Terminal
Fitting for any crack.
*[1]
2. Within 2,000 flight
cycles after the Issue
001 date of the Re-
quirements Bulletin
B787-81205-
SB570048-00 RB
Whichever occurs
first:
-CONDITION 39 (AC-
TION 1): Repeat the
UT inspection of
Splice Plate No. 1 for
any crack.*[2]*[1]
CONDITION 39: NO
CRACK FOUND
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[3]
-CONDITION 39 (AC-
TION 2): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[2]*[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 36 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 37

Group 9:
Table 25  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval (Not
to Exceed)
Boeing Recommended
Compliance Time (Whichever Occurs
Later)
ActionCondition
-Before further flight.CONDITION 40 (AC-
TION 1): Contact
The Boeing Compa-
ny for repair instruc-
tions and do the re-
pair.
CONDITION 40:
ANY CRACK
FOUND
Whichever occurs
first:
-CONDITION 40 (AC-
TION 2): Repeat the
UT inspection of
Splice Plate No. 1 for
any crack. *[2]*[1]
1. 6,000 flight cycles
2. 40,500 flight hours
3. Before the result
of 7,764.71 -
(0.117647*FH) - FC
is less than or equal
to zero. *[3]
-CONDITION 40 (AC-
TION 3): Repeat the
UT inspection of
Splice Plate No. 1 at
the Rear Spar Termi-
nal Fitting for any
crack.*[2]*[1]
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[3]  FH = Flight Hours. FC = Flight Cycles.
Group 9:
Table 26  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
All Airplanes
1. Before 20,000 total
flight cycles
2. Before 101,250 total
flight hours
3. Before the result of
25,263.16 -
(0.175439*TFH) - TFC is
less than or equal to ze-
ro. *[1]
ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 37 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 38

Group 9:
Table 26  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
Whichever occurs
first:
-CONDITION 41 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack.*[3]
CONDITION 41: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 41 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 42 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 42: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 42 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Termi-
nal Fitting for any crack. *[3]
1. 6,000 flight cy-
cles
2. 27,000 flight
hoursCONDITION 42 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[2]
3. Before the result
of 11,000.00 -
(0.333333*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
*[4]  FH = Flight Hours. FC = Flight Cycles.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 38 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 39

Group 9:
Table 27  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 Ultrasonic (UT) Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first:ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
All Airplanes
1. Before 33,000 total
flight cycles
2. Before 101,250 total
flight hoursACTION 2: Do a UT inspec-tion of Splice Plate No. 1
for any crack. *[2] 3. Before the result of53,086.96 -
(0.405797*TFH) - TFC is
less than or equal to ze-
ro. *[1]
Whichever occurs
first:
-CONDITION 43 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[3]
CONDITION 43: NO
CRACK FOUND
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 43 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
-Before further flight.CONDITION 44 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 44: ANY
CRACK FOUND
Whichever occurs
first:
-CONDITION 44 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack. *[3]
1. 6,000 flight cy-
cles
2. 40,500 flight
hoursCONDITION 44 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack.*[3]*[2]
3. Before the result
of 7,764.71 -
(0.117647*FH) -
FC is less than or
equal to zero. *[4]
*[1]  
TFH = Total Flight Hours. TFC = Total Flight Cycles.
*[2]  It is not required to do this inspection two times at the same maintenance check.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and
installed after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 39 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 40

Group 9:
Table 27  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[4]  
FH = Flight Hours. FC = Flight Cycles.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA) approved for all EASA approved airplanes listed in this Requirements
Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery
configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 40 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 41

E.    ACCOMPLISHMENT INSTRUCTIONS
1.
GENERAL INFORMATION
OBEY THE MANUFACTURER'S PROCEDURES WHEN YOU DO TASKS THAT
ARE RELATED TO AIRWORTHINESS LIMITATIONS (AWL). IF YOU DO NOT OBEY
THE PROCEDURES, IT CAN INCREASE THE RISK OF A SOURCE OF IGNITION.
INJURIES TO PERSONNEL, AND DAMAGE TO EQUIPMENT CAN OCCUR IF
THERE IS A FIRE OR EXPLOSION.WARNING
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2.
This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. A Detailed Inspection (DET) is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting is
normally supplemented with a direct source of good lighting at an intensity deemed ap-
propriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary.
Surface cleaning and elaborate procedures may be required.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 41 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 42

5. The compliance times for the actions in the Work Instructions are in Compliance.
6. Some Work Instructions task(s) are related to Critical Design Configuration Control Limi-
tation (CDCCL) required by Special Compliance Items/Airworthiness Limitation (SCI/AWL)
D011Z009-03-04. Strict adherence to SCI/AWL is required.
7. The Work Instructions include access tasks that are related to Critical Design Configuration
Control Limitation (CDCCL). Strict adherence to Airworthiness Limitation (AWL) is required.
8.
Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in SRM Chapter 51
– Torque Values:
– Values for structural fasteners are given in 787 Structural Repair Manual, Chapter
51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
9. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
10. Use of colors in Tasks is based on guidance from the S1000D International specification
for technical publications.
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
12. The CONDITIONS, ACTIONS, and OPTIONS shown apply to each component indepen-
dently.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 42 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 43

2. WORK INSTRUCTIONS
A.
Actions Required for Compliance
(1) Requirements
Group 1:
Table 1  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--All Airplanes
-Task 1ACTION 1: Do an Ultrason-
ic (UT) Inspection of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
ACTION 2: Do a Detailed
Inspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
-Task 4ACTION 3: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 43 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 44

Group 1:
Table 1  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--CONDITION 1: NO
CRACK FOUND
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 1CONDITION 1 (ACTION
1): Repeat the UT Inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[1]*[2]
CONDITION 1 (ACTION
2): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[1]*[2]
-Task 4CONDITION 1 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 44 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 45

Group 1:
Table 1  Left Wing and Right Wing - Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) Inspection and Detailed
 Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 2 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 2: ANY
CRACK FOUND
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 1CONDITION 2 (ACTION
2): Repeat the UT Inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack. *[3]*[1]*[2]
CONDITION 2 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[1]*[2]
-Task 4CONDITION 2 (ACTION
4): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[3]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow.
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 45 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 46

Group 1:
Table 2  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--All Airplanes
-Task 3ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 4ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 46 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 47

Group 1:
Table 2  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--CONDITION 3: NO
CRACK FOUND
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--
-Task 3CONDITION 3 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Ter-
minal Fitting for any
crack.*[2]
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 4CONDITION 3 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 47 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 48

Group 1:
Table 2  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOIN
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 48 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 49

Group 1:
Table 2  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 4 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 4: ANY
CRACK FOUND
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--
-Task 3CONDITION 4 (ACTION
2): Repeat the UT inspec-
tion of the Rear Spar Ter-
minal Fitting for any crack.
*[2]
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 4CONDITION 4 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
*[1]  
It is not required to do this inspection two times at the same maintenance check.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 49 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 50

Group 1:
Table 2  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
Group 1:
Table 3  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) In-
spection and Detailed Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--All Airplanes
-Task 7ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Lower Chord for any crack.
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 1ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[1]*[2]
ACTION 3: Do a Detailed
Inspection (DET) of Splice
Plate No. 1 and Splice
Plate No. 2 for any
crack.*[1]*[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 50 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 51

Group 1:
Table 3  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) In-
spection and Detailed Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--CONDITION 5: NO
CRACK FOUND
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--
-Task 7CONDITION 5 (ACTION
1): Repeat the UT inspec-
tion of the Lower Chord for
any crack.*[3]
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 1CONDITION 5 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[1]*[2]
CONDITION 5 (ACTION
3): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[1]*[2]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 51 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 52

Group 1:
Table 3  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) In-
spection and Detailed Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
- PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
-
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 52 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 53

Group 1:
Table 3  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) In-
spection and Detailed Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 6 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 6: ANY
CRACK FOUND
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--
-Task 7CONDITION 6 (ACTION
2): Repeat the UT inspec-
tion of the Lower Chord for
any crack. *[3]
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 1CONDITION 6 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
and Splice Plate No. 2 for
any crack.*[3]*[1]*[2]
CONDITION 6 (ACTION
4): Repeat the DET of
Splice Plate No. 1 and
Splice Plate No. 2 for any
crack.*[3]*[1]*[2]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 53 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 54

Group 1:
Table 3  Left Wing and Right Wing - Lower Chord and Splice Plate No. 1 and Splice Plate No. 2 Ultrasonic (UT) In-
spection and Detailed Inspection (DET)
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  The inspector who does the UT Inspection must be different than the inspector who does the DET.
*[3]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 54 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 55

Group 2:
Table 4  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--All Airplanes
-Task 2ACTION 1: Do an Ultrason-
ic (UT) inspection of Splice
Plate No. 1 for any crack.
*[1]
-Task 6ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 55 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 56

Group 2:
Table 4  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--CONDITION 7: NO
CRACK FOUND
-Task 2CONDITION 7 (ACTION
1): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack.*[2]*[1]
-Task 6CONDITION 7 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 56 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 57

Group 2:
Table 4  Left Wing and Right Wing - Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
--CONDITION 8 (ACTION
1): Contact The Boeing
Company for repair instruc-
tions and do the repair.
CONDITION 8: ANY
CRACK FOUND
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 2CONDITION 8 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
for any crack. *[2]*[1]
-Task 6CONDITION 8 (ACTION
3): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
*[1]  
It is not required to do this inspection two times at the same maintenance check.
*[2]  It is not required to do the repeat inspections in the areas where a repair affects the inspection area if the repair meets the conditions
that follow:
1. The repair is the corrective action to the crack condition identified in Requirements Bulletin B787-81205-SB570048-00 RB and installed
after the Issue 001 date of Requirements Bulletin B787-81205-SB570048-00 RB.
2. The installed repair was approved by the Boeing Organization Designation Authorization (ODA) via a FAA Form 8100-9.
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 57 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 58

Group 2:
Table 5  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--All Airplanes
-Task 5ACTION 1: Do an Ultrason-
ic (UT) inspection of the
Rear Spar Terminal Fitting
for any crack.
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 6ACTION 2: Do a UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack. *[1]
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 58 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 59

Group 2:
Table 5  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--CONDITION 9: NO
CRACK FOUND
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
PART 3 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING LOWER
SIDE OF BODY (SOB)
JOINT
--
-Task 5CONDITION 9 (ACTION
1): Repeat the UT inspec-
tion of the Rear Spar Ter-
minal Fitting for any
crack.*[2]
PART 1 - GET ACCESS
TO THE LEFT WING AND
RIGHT WING SIDE OF
BODY (SOB) SPLICE
PLATES
--
-Task 6CONDITION 9 (ACTION
2): Repeat the UT inspec-
tion of Splice Plate No. 1
at the Rear Spar Terminal
Fitting for any crack.*[2]*[1]
PART 2 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
SIDE OF BODY (SOB)
SPLICE PLATES
--
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 59 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 60

Group 2:
Table 5  Left Wing and Right Wing - Rear Spar Terminal Fitting and Splice Plate No. 1 Ultrasonic (UT) Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB570048-00 Issue 001
or later approved issues
as an accepted proce-
dure.
Method of ComplianceActionCondition
PART 4 - CLOSE AC-
CESS TO THE LEFT
WING AND RIGHT WING
LOWER SIDE OF BODY
(SOB) JOINT
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00
AM
Page 60 of 180
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB570048-00 RB
Issue 001, 11 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

The text continues at https://openairdocs.org/service-documents/boeing/b787-81205-sb570048-00-rb/file/a91b92047e41.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
