# Boeing Alert Requirements Bulletin B787-81205-SB780041-00 RB

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 001 ("B787-81205-78A0041 RB-01--"), 24 pages: PDF https://openairdocs.org/files/sha256/61/17/611787f4917007b2bf150c31d4961e48140946ea94b05779d042a278a326529b; text https://openairdocs.org/service-documents/boeing/b787-81205-sb780041-00-rb/file/611787f49170.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2020-0465; AD 2020-26-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- 787-78A0041 RB Issue 002 ("787-78A0041 RB Issue 002"), 27 pages: PDF https://openairdocs.org/files/sha256/36/69/36691d3bc4c6f99501aa4ba519a4c99d1c290629e77ecc6dd68454cfb16f49e3; text https://openairdocs.org/service-documents/boeing/b787-81205-sb780041-00-rb/file/36691d3bc4c6.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2023-1037; AD 2024-01-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB780041-00 RB
- Latest revision known: B787-81205-SB780041-00 RB, Issue 002, dated December 21, 2021 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb780041-00-rb

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-01-04](https://openairdocs.org/ad/2024-01-04.md), effective Mar 7, 2024: Revisions 001 and 002
- [AD 2020-26-08](https://openairdocs.org/ad/2020-26-08.md), effective Jan 27, 2021: Revision 001

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/boeing/b787-81205-sb780041-00-rb/proposed.md).

## Text (24 pages)

Revision 001, the newest copy. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2020-0465; AD 2020-26-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Alert Requirements Bulletin B787-81205-SB780041-00 RB THRUST
REVERSER SYSTEM (ROLLS-ROYCE TRENT 1000 ENGINES) - Thrust
Reverser - Inner Fixed Structure Forward Upper Fire Seal and Thermal
Blanket - Inspection
Copyright © 2020 Boeing. Unpublished Work. All rights reserved.
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license
may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data
has the individual responsibility to abide by all export laws.
ECCN: 9E991
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 1 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
7.0
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Appendix A – ENGINE - THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER FIRE
SEAL AND THERMAL BLANKET - GENERAL VISUAL INSPECTIONS [Group 1, Configuration
1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 2 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s) equipped with Rolls-Royce engines,
line number(s) 7-10, 12-16, 18, 22, 24, 31, 40-42, 47-48, 51, 56, 59, 61, 63, 66-69, 74, 78, 80, 83,
86-88, 97, 101-102, 107-108, 110-114, 118, 120-121,126, 128, 130, 132-133, 136, 140, 146-149,
153, 156, 161, 165-166, 169, 173, 177-179, 183, 185, 187, 190, 193, 195, 197, 199, 202-203, 205-
206, 209-210, 213, 217-218, 226, 228, 234, 236, 239-240, 242-244, 246, 256, 259, 267, 272, 276,
279-280, 284, 287, 294-296, 299, 308-310, 313-316, 319, 322, 325, 327, 329, 331, 335, 337-338,
341, 345-347, 349-351, 357-358, 360-361, 367, 369-370, 373-375, 377, 382, 386, 392, 396-397,
399-401, 403-404, 406, 408, 414-415, 418-419, 421, 424, 426, 428, 431, 433, 435-437, 442, 447,
450-451, 454-456, 460-462, 467-468, 471-472, 474-476, 479, 481-482, 484, 487-488, 490-491,
493, 497, 504-505, 508-509, 513, 521, 524, 528, 532, 534-535, 538, 550, 552, 556-557, 559, 565,
568, 571, 573, 576, 581-584, 588-590, 593, 599-600, 602-605, 607-609, 612, 616, 619, 621-625,
627, 629, 633, 636, 638-639, 645, 647, 651, 656, 658, 660, 662, 664-666, 671-675, 678, 680-682,
685-686, 688-689, 691, 693-695, 697-698, 700-701, 707-710, 714-715, 717, 719, 721, 732-733,
735, 739, 741, 749, 751, 755-756, 760, 762, 765, 769, 771-772, 794, 803-804, 809, 813, 816, 823,
827, 829, 834-839, 843-844, 846, 849, 851-853, 855-856, 861, 863, 869-870, 875, 877-878, 882,
884-885, 888, 896, 901, 904, 907, 914, 919-920, 922, 925, 928, 935, 938, 947, 952, 955-956, 968,
971, 973, 978, 982-985, 988, 992, 995, 997, 1000, 1003, 1006, 1011, 1015, 1023, 1026, 1028,
1033, 1036, 1039-1040, 1042, 1046-1047, 1056, 1060, 1062, 1065, 1068, 1070, 1072, 1076, 1080,
1082-1083, 1085-1086, 1090-1092, 1094-1095, 1097-1098, 1112-1113, 1122-1123, 1126, 1132-
1134, 1136-9996 in 1 Group(s). Where the effectivity is presented with hyphens between line
numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means
line numbers 1 through 9 inclusive.
NOTE: The Variable Number table below includes all affected airplanes up to Line Number 1159.
Affected airplanes after Line Number 1159 will show up as available as they are added
to Maintenance Performance Toolbox.
Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8, 787-9, and 787-10 Airplanes-1
Airplanes with Rolls-Royce Trent 1000 Engine Thrust Reversers1
Airplanes with General Electric (GE) Engine Thrust Reversers2
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 3 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 4

Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA144
1ZA270 - ZA277
1ZA445 - ZA459
1ZA506 - ZA516
1ZA536 - ZA545
1ZA576 - ZA580
1ZA588 - ZA593
1ZA650 - ZA652
1ZA665 - ZA677
1ZA778 - ZA779
1ZA839
1ZA842
1ZA853 - ZA863
1ZA881 - ZA888
1ZA949 - ZA950
1ZA958 - ZA959
1ZA963 - ZA966
1ZB001 - ZB012
1ZB027 - ZB043
1ZB047 - ZB061
1ZB127 - ZB136
1ZB197 - ZB198
1ZB219 - ZB220
1ZB224 - ZB229
1ZB251 - ZB258
GroupVariable Number
1ZB265 - ZB268
1ZB362 - ZB379
1ZB407 - ZB421
1ZB611 - ZB618
1ZB646 - ZB649
1ZB688 - ZB702
1ZB733 - ZB735
1ZB742 - ZB743
1ZB749 - ZB751
1ZB753 - ZB757
1ZB766 - ZB767
1ZB818 - ZB821
1ZB828 - ZB845
1ZB858 - ZB863
1ZB874 - ZB876
1ZB890
1ZB953
1ZB990 - ZB991
1ZB997
1ZC001 - ZC020
1ZC022
1ZC101 - ZC106
1ZC116 - ZC118
1ZC131
1ZC165
1ZD001 - ZD008
1ZD029 - ZD031
GroupVariable Number
1ZD038
1ZE003 - ZE010
1ZE013 - ZE014
1ZE016 - ZE017
1ZE075
1ZE085 - ZE086
1ZE090 - ZE091
1ZE095 - ZE096
1ZE100
1ZE112
1ZE115
1ZE150
1ZE195 - ZE198
1ZE235
1ZE239 - ZE240
1ZE270 - ZE273
1ZE310 - ZE314
1ZE375
1ZE380 - ZE381
1ZE425 - ZE428
1ZE435 - ZE438
1ZE481
1ZE486 - ZE488
1ZE581
1ZE586
1ZE602
1ZE671
2. Spares Affected
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 4 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 5

Examine your spares supply for the parts identified below. If any parts are found, refer to Accom-
plishment Instructions - Step 2., Work Instructions for the recommended action.
Table 3  
Part Numbers
725Z3030, 725Z3040, 725Z3050, and 725Z3060.
B. CONCURRENT REQUIREMENTS
None.
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB780041-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB780041-00 RB mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that
CONDITION or OPTION.
Accomplish the required actions, based on the applicable conditions in the below tables in accordance with
Accomplishment Instructions.
Group 1, Configuration 1:
Table 5  ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 2,200 Flight
Hours after the Is-
sue 001 date of
Requirements Bul-
letin B787-81205-
SB780041-00 RB
Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 1: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1]
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 5 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 6

Group 1, Configuration 1:
Table 5  ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before Further
Flight
CONDITION 2 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-127 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 2: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-127
*[1]
2,200 Flight Hours-CONDITION 2 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
-Before Further
Flight
CONDITION 3 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-151 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 3: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-151
*[1]
2,200 Flight Hours-CONDITION 3 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 4: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
-Before Further
Flight
CONDITION 5 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 5: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
2,200 Flight Hours-CONDITION 5 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 6 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 7

Group 1, Configuration 1:
Table 6  ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 2,200 Flight
Hours after the Is-
sue 001 date of
Requirements Bul-
letin B787-81205-
SB780041-00 RB
Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 6: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1]
-Before Further
Flight
CONDITION 7 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-128 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 7: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-128
*[1]
2,200 Flight Hours-CONDITION 7 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
-Before Further
Flight
CONDITION 8 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-152 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 8: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-152
*[1]
2,200 Flight Hours-CONDITION 8 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 9: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 7 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 8

Group 1, Configuration 1:
Table 6  ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before Further
Flight
CONDITION 10 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 10: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
2,200 Flight Hours-CONDITION 10 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 1:
Table 7  ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 2,200 Flight
Hours after the Is-
sue 001 date of
Requirements Bul-
letin B787-81205-
SB780041-00 RB
Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 11: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1]
-Before Further
Flight
CONDITION 12 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-127 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 12: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-127
*[1]
2,200 Flight Hours-CONDITION 12 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 8 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 9

Group 1, Configuration 1:
Table 7  ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before Further
Flight
CONDITION 13 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-151 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 13: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-151
*[1]
2,200 Flight Hours-CONDITION 13 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 14: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
-Before Further
Flight
CONDITION 15 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 15: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
2,200 Flight Hours-CONDITION 15 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 1:
Table 8  ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 2,200 Flight
Hours after the Is-
sue 001 date of
Requirements Bul-
letin B787-81205-
SB780041-00 RB
Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 9 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 10

Group 1, Configuration 1:
Table 8  ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 16: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1]
-Before Further
Flight
CONDITION 17 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-128 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 17: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-128
*[1]
2,200 Flight Hours-CONDITION 17 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
-Before Further
Flight
CONDITION 18 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-152 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 18: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-152
*[1]
2,200 Flight Hours-CONDITION 18 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
2,200 Flight Hours-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 19: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 10 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 11

Group 1, Configuration 1:
Table 8  ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Before Further
Flight
CONDITION 20 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 20: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
2,200 Flight Hours-CONDITION 20 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 2:
No Action Required.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane
in its original Boeing delivery configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 11 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 12

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. For the related SB, some locations are marked RC Start and RC End to identify
the requirements that are restated from the RB. For the related SB, the areas between
RC Start and RC End, including sub-steps and any figures identified between RC Start
and RC End, must be done to comply with the AD. Therefore, an Alternative Method of
Compliance (AMOC) is required for any deviations to steps between RC Start and RC
End, including substeps and identified figures. For the related SB, the steps not between
RC Start and RC End may be deviated from using accepted methods in accordance with
the operator's maintenance or inspection program without obtaining approval of an AMOC;
this is provided that the steps between RC Start and RC End, including sub-steps and
identified figures, can still be done as specified, and the airplane can be put back in an
airworthy condition. Figures not required for compliance are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in Work Instructions are in Compliance.
5. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION or an OPTION, do
all of the ACTION numbers for that CONDITION or OPTION.
6. The CONDITIONS and ACTIONS shown apply to each thrust reverser independently.
7. A General Visual Inspection is defined as: A visual examination of an interior or exterior
area, installation or assembly to detect obvious damage, failure or irregularity. This level
of inspection is made from within touching distance unless otherwise specified. A mirror
may be necessary to ensure visual access to all surfaces in the inspection area. This
level of inspection is made under normal available lighting conditions such as daylight,
hangar lighting, flashlight or drop-light and may require removal or opening of access
panels or doors. Stands, ladders or platforms may be required to gain proximity to the
area being checked.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 12 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 13

2. WORK INSTRUCTIONS
A. Actions Required for Compliance
(1) Requirements
Group 1, Configuration 1:
Table 1  ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN
ACCESS
-Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 1: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1] PART 2: IFS FOR-WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 3: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-127 RE-
PLACEMENT
-CONDITION 2 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-127 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 2: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-127
*[1]
PART 1: OPEN
ACCESS
-CONDITION 2 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 13 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 14

Group 1, Configuration 1:
Table 1  ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 5: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-151 RE-
PLACEMENT
-CONDITION 3 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-151 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 3: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-151
*[1]
PART 1: OPEN
ACCESS
-CONDITION 3 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 4: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2] PART 7: IFS FOR-WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 8: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET REPLACE-
MENT
-CONDITION 5 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 5: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
PART 1: OPEN
ACCESS
-CONDITION 5 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 9: CLOSE
ACCESS
-
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 14 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 15

Group 1, Configuration 1:
Table 1  ENGINE 1 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 1:
Table 2  ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN
ACCESS
-Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 6: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1] PART 2: IFS FOR-WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 4: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-128 RE-
PLACEMENT
-CONDITION 7 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-128 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 7: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-128
*[1]
PART 1: OPEN
ACCESS
-CONDITION 7 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 15 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 16

Group 1, Configuration 1:
Table 2  ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 6: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-152 RE-
PLACEMENT
-CONDITION 8 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-152 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 8: ANY DAM-
AGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-152
*[1]
PART 1: OPEN
ACCESS
-CONDITION 8 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 9: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2] PART 7: IFS FOR-WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 8: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET REPLACE-
MENT
-CONDITION 10 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 10: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
PART 1: OPEN
ACCESS
-CONDITION 10 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 9: CLOSE
ACCESS
-
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 16 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 17

Group 1, Configuration 1:
Table 2  ENGINE 1 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 1:
Table 3  ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN
ACCESS
-Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 11: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1] PART 2: IFS FOR-WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 3: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-127 RE-
PLACEMENT
-CONDITION 12 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-127 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 12: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-127
*[1]
PART 1: OPEN
ACCESS
-CONDITION 12 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 17 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 18

Group 1, Configuration 1:
Table 3  ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 5: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-151 RE-
PLACEMENT
-CONDITION 13 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-151 with new
IFS forward upper fire seal
PN 725Z3171-151.
CONDITION 13: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-151
*[1]
PART 1: OPEN
ACCESS
-CONDITION 13 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 14: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2] PART 7: IFS FOR-WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 8: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET REPLACE-
MENT
-CONDITION 15 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 15: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
PART 1: OPEN
ACCESS
-CONDITION 15 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 9: CLOSE
ACCESS
-
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 18 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 19

Group 1, Configuration 1:
Table 3  ENGINE 2 - LEFT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 1:
Table 4  ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 1: OPEN
ACCESS
-Do a General Visual Inspec-
tion of the IFS forward up-
per fire seal and thermal
blanket for damage. *[1]*[2]
All Airplanes with any
Rolls-Royce Trent 1000
Engine Thrust Reverser PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper fire seal for damage.
*[1]
CONDITION 16: NO IFS
FORWARD UPPER FIRE
SEAL DAMAGE FOUND
*[1] PART 2: IFS FOR-WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 4: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-128 RE-
PLACEMENT
-CONDITION 17 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-128 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 17: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-128
*[1]
PART 1: OPEN
ACCESS
-CONDITION 17 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 19 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 20

Group 1, Configuration 1:
Table 4  ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
Refer to the listed
procedures in SB
B787-81205-
SB780041-00 Is-
sue 001 or later
approved issues
as an accepted
procedure
Method of Compli-
ance
ActionCondition
PART 6: IFS FOR-
WARD UPPER
FIRE SEAL PN
725Z3171-152 RE-
PLACEMENT
-CONDITION 18 (ACTION
1): Replace damaged IFS
forward upper fire seal PN
725Z3171-152 with new
IFS forward upper fire seal
PN 725Z3171-152.
CONDITION 18: ANY
DAMAGE FOUND ON IFS
FORWARD UPPER FIRE
SEAL PN 725Z3171-152
*[1]
PART 1: OPEN
ACCESS
-CONDITION 18 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper fire seal for
damage. *[1]
PART 2: IFS FOR-
WARD UPPER
FIRE SEAL IN-
SPECTION
Appendix A
PART 1: OPEN
ACCESS
-Repeat General Visual In-
spection of the IFS forward
upper thermal blanket for
damage. *[2]
CONDITION 19: NO IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2] PART 7: IFS FOR-WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 8: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET REPLACE-
MENT
-CONDITION 20 (ACTION
1): Replace any damaged
IFS forward upper thermal
blanket.
CONDITION 20: ANY IFS
FORWARD UPPER
THERMAL BLANKET
DAMAGE FOUND *[2]
PART 1: OPEN
ACCESS
-CONDITION 20 (ACTION
2): Repeat General Visual
Inspection of the IFS for-
ward upper thermal blanket
for damage. *[2]
PART 7: IFS FOR-
WARD UPPER
THERMAL BLAN-
KET INSPECTION
Appendix A
PART 9: CLOSE
ACCESS
-
*[1]  IFS forward upper fire seal damage is defined as any cuts, splits, nicks, punctures, and missing sections.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 20 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 21

Group 1, Configuration 1:
Table 4  ENGINE 2 - RIGHT THRUST REVERSER - INNER FIXED STRUCTURE (IFS) FORWARD UPPER
 FIRE SEAL AND THERMAL BLANKET - INSPECTION
*[2]  IFS forward upper thermal blanket damage is defined as any tears, cuts, missing metal skin, missing insulation, and over-
temperature conditions shown by discoloration or scorching.
Group 1, Configuration 2:
No Action Required.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 21 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 22

Appendix A –  ENGINE - THRUST REVERSER - INNER FIXED STRUCTURE
(IFS) FORWARD UPPER FIRE SEAL AND THERMAL BLANKET - GENERAL
VISUAL INSPECTIONS [Group 1, Configuration 1: ]
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND
Alert:
THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD,
SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR
COMPLIANCE DOCUMENT. THE BOEING PROCESSES USED TO CREATE THE SERVICE
BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION
BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN
THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB
REFERS TO AS THE RELATED DOCUMENT.
Procedure
1. Engine - Thrust Reverser - Inner Fixed Structure (IFS) Forward Upper Fire Seal and Thermal Blanket
- General Visual Inspection Area (Right Opposite)
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 22 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

### Page 23 (OCR)

DEING  B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN
7
2) IFS FORWARD UPPER
THERMAL BLANKET
THRUST REVERSER
(TYPICAL)
) IFS FORWARD
UPPER FIRE
SEAL
A-A
INSPECTION AREA
ICN-B787-A-000061-A-81205-17332-A-01-1
Figure 1 Engine - Thrust Reverser - Inner Fixed Structure (IFS) Forward Upper Fire Seal and Thermal
Blanket - General Visual Inspection Area (Right Opposite)
1. The step numbers shown below agree with the numbers shown in the circle symbols in the Appendix. The
QTY number shown below are the number of parts necessary for this Appendix.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 23 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.

### Page 24

Table 1  
More DataQtyIdentificationNameActionStep
*[1]1-FORWARD UPPER FIRE
SEAL
Inspect1
*[2]1-FORWARD UPPER THER-
MAL BLANKET
Inspect2
*[1]  Do a General Visual Inspection of the IFS forward upper fire seal for damage. Damage is defined as any cuts, splits, nicks, punctures,
and missing sections.
*[2]  Do a General Visual Inspection of the IFS forward upper thermal blanket for damage. Damage is defined as any tears, cuts, missing
metal skin, missing insulation, and over-temperature conditions shown by discoloration or scorching.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
Page 24 of 24
EXPORT CONTROLLED ECCN: 9E991
See title page for details.
B787-81205-SB780041-00 RB
Issue 001, 31 Mar 2020
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
