# Boeing Alert Requirements Bulletin B787-81205-SB780049-00 RB

Copy: Revision 001 ("RB B787-81205-SB780049-00 RB"), 25 pages: PDF https://openairdocs.org/files/sha256/02/7e/027e1e97450b710ac177df5514c32f69da8330ec1581136964aca19e36d6ae46; text https://openairdocs.org/service-documents/boeing/b787-81205-sb780049-00-rb/file/027e1e97450b.md. Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-3471, the docket of a proposed AD (Federal Register 2026-06691). Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Boeing](https://openairdocs.org/service-documents/boeing.md)
- Type: Service bulletin (Alert Requirements Bulletin)
- Number: B787-81205-SB780049-00 RB
- Latest revision known: B787-81205-SB780049-00 RB, Issue 001, dated August 12, 2025 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/boeing/b787-81205-sb780049-00-rb

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/boeing/b787-81205-sb780049-00-rb/proposed.md).

## Text (25 pages)

Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2026-3471, the docket of a proposed AD (Federal Register 2026-06691). Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT
Alert Requirements Bulletin B787-81205-SB780049-00 RB EXHAUST - Thrust
Reverser - Left and Right Engine Thrust Reverser Halves - Thrust Reverser
Outer V-Blade Inspection
Copyright © 2025 The Boeing Company
Treatment of this data module and its content is governed by contract with Boeing. Rights to use this data module are licensed on a per
aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company. Boeing, the Boeing signature,
the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10,
MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark
license is granted in connection with this document unless provided in writing by Boeing.
EXPORT CONTROLLED
This technology or software is subject to the U.S. Export Administration Regulations (EAR), (15 C.F.R. Parts 730-774). No authorization
from the U.S. Department of Commerce is required for export, re-export, in-country transfer, or access EXCEPT to country group E:1 or
E:2 countries/persons per Supp.1 to Part 740 of the EAR.
ECCN: 9E991
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 1 of 25
Export Controlled ECCN: 9E991
See page 1 for details
3.0
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 2

Table of Contents
Page
A. EFFECTIVITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B. CONCURRENT REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
C. COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
D. APPROVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
E. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1. General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. Work Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 2 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 3

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN
IN EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO
Alert:
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT
TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT.
THE BOEING PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE
REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START"
AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS
(COMPLIANCE, WORK INSTRUCTIONS...) OF THE RB WHICH THE SB REFERS TO AS THE
RELATED DOCUMENT.
A. EFFECTIVITY
1. Airplanes
This bulletin is applicable to 787-8, 787-9, 787-10 Airplane(s), line number(s) 6-9900 in 1 Group(s).
Where the effectivity is presented with hyphens between line numbers, the airplane applicability
means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
NOTE: Installation of spare Thrust Reversers (TRs) after delivery, and/or rotation of parts between
airplanes, could result in an airplane with more than one configuration.
NOTE: The Variable Number table below includes affected airplanes available as of the issue
date of this bulletin. Affected airplane Variable Numbers added to MyBoeingFleet.com
after the issue date of this bulletin will be shown using the Maintenance Performance
Toolbox EFFECTIVITY search function result.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 3 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 4

Table 1  
DESCRIPTIONCONFIGURATIONGROUP
787-8, 787-9 and 787-10 Airplanes-1
787 Airplanes with any Rolls Royce Trent 1000 Engine that has accu-
mulated 40,000 total TR flight hours or greater, or 5,000 total TR flight
cycles or greater, as of the Issue 001 date of B787-81205-SB780049-
00 RB
1
787 Airplanes with any Rolls Royce Trent 1000 Engine that has accu-
mulated less than 40,000 total TR flight hours, and less than 5,000
total TR flight cycles as of the Issue 001 date of B787-81205-
SB780049-00 RB
2
787 Airplanes with any General Electric GEnx-1B Engine that has
accumulated 40,000 total TR flight hours or greater, or 5,000 total TR
flight cycles or greater, as of the Issue 001 date of B787-81205-
SB780049-00 RB
3
787 Airplanes with any General Electric GEnx-1B Engine that has
accumulated less than 40,000 total TR flight hours, and less than 5,000
total TR flight cycles, as of the Issue 001 date of B787-81205-
SB780049-00 RB
4
Airplane Models: 787-10, 787-8, 787-9
Table 2
GroupVariable Number
1ZA006
1ZA100 - ZA105
1ZA116 - ZA124
1ZA135 - ZA144
1ZA152 - ZA156
1ZA175 - ZA189
1ZA195 - ZA204
1ZA215 - ZA225
1ZA230 - ZA256
1ZA260 - ZA277
1ZA285 - ZA296
1ZA317 - ZA324
1ZA327
1ZA334 - ZA335
GroupVariable Number
1ZA341 - ZA342
1ZA380 - ZA389
1ZA430 - ZA439
1ZA445 - ZA489
1ZA506 - ZA516
1ZA536 - ZA545
1ZA560 - ZA567
1ZA576 - ZA580
1ZA586
1ZA588 - ZA593
1ZA610 - ZA617
1ZA650 - ZA652
1ZA655 - ZA663
1ZA665 - ZA677
GroupVariable Number
1ZA680 - ZA685
1ZA695 - ZA698
1ZA715 - ZA716
1ZA718 - ZA719
1ZA740 - ZA741
1ZA768 - ZA769
1ZA778 - ZA779
1ZA783 - ZA784
1ZA817 - ZA832
1ZA839
1ZA841 - ZA842
1ZA846 - ZA848
1ZA853 - ZA864
1ZA873 - ZA876
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 4 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 5

GroupVariable Number
1ZA881 - ZA888
1ZA916 - ZA920
1ZA949 - ZA950
1ZA954 - ZA959
1ZA963 - ZA966
1ZA968 - ZA972
1ZA980 - ZA981
1ZA990
1ZB001 - ZB012
1ZB021 - ZB043
1ZB047 - ZB061
1ZB077 - ZB081
1ZB097 - ZB121
1ZB127 - ZB137
1ZB167 - ZB191
1ZB197 - ZB198
1ZB217
1ZB219 - ZB220
1ZB224 - ZB229
1ZB234 - ZB242
1ZB246 - ZB248
1ZB251 - ZB258
1ZB261 - ZB262
1ZB265 - ZB282
1ZB299
1ZB302 - ZB305
1ZB332 - ZB338
1ZB362 - ZB379
1ZB407 - ZB435
1ZB446 - ZB467
1ZB536 - ZB543
GroupVariable Number
1ZB545 - ZB547
1ZB558 - ZB589
1ZB603 - ZB618
1ZB646 - ZB649
1ZB656 - ZB669
1ZB676 - ZB681
1ZB688 - ZB707
1ZB733 - ZB735
1ZB738 - ZB740
1ZB742 - ZB745
1ZB749 - ZB751
1ZB753 - ZB757
1ZB763 - ZB769
1ZB771 - ZB775
1ZB778 - ZB821
1ZB828 - ZB845
1ZB858 - ZB863
1ZB874 - ZB876
1ZB887
1ZB890
1ZB893 - ZB922
1ZB924
1ZB926 - ZB927
1ZB934 - ZB965
1ZB967 - ZB971
1ZB977 - ZB991
1ZB993 - ZB997
1ZC001 - ZC028
1ZC036 - ZC056
1ZC061 - ZC070
1ZC101 - ZC112
GroupVariable Number
1ZC116 - ZC118
1ZC126 - ZC130
1ZC151 - ZC152
1ZC155 - ZC162
1ZC165
1ZC170 - ZC179
1ZC211 - ZC219
1ZC221 - ZC228
1ZC236 - ZC241
1ZC276 - ZC283
1ZC291 - ZC295
1ZC301 - ZC308
1ZC336 - ZC337
1ZC401 - ZC402
1ZD001 - ZD009
1ZD012 - ZD029
1ZD038
1ZD048 - ZD050
1ZD053
1ZE001 - ZE010
1ZE013 - ZE014
1ZE016 - ZE019
1ZE031 - ZE032
1ZE040 - ZE048
1ZE075
1ZE085 - ZE086
1ZE090 - ZE091
1ZE095 - ZE098
1ZE100
1ZE105 - ZE108
1ZE110 - ZE115
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 5 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 6

GroupVariable Number
1ZE120 - ZE123
1ZE125 - ZE126
1ZE130
1ZE135
1ZE150
1ZE165 - ZE166
1ZE170 - ZE171
1ZE195 - ZE198
1ZE220 - ZE246
1ZE270 - ZE273
1ZE310 - ZE320
1ZE340 - ZE341
1ZE350 - ZE372
1ZE375
GroupVariable Number
1ZE380 - ZE381
1ZE383 - ZE384
1ZE415 - ZE420
1ZE425 - ZE428
1ZE435 - ZE437
1ZE445
1ZE455 - ZE456
1ZE481
1ZE486 - ZE488
1ZE491 - ZE497
1ZE506 - ZE521
1ZE546 - ZE547
1ZE581
1ZE586
GroupVariable Number
1ZE601 - ZE602
1ZE641 - ZE651
1ZE696 - ZE701
1ZE726 - ZE728
1ZE736
1ZE746 - ZE747
1ZE756 - ZE760
1ZE781 - ZE797
1ZE971
1ZE976
1ZE986 - ZE988
1ZF001 - ZF004
1ZF041 - ZF050
1ZF111
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Accomplishment Instructions - Step 2., Work Instructions for the recommended
action.
Group 1, Configuration 1-2:
Table 3  
Part Number
725Z3030-()
725Z3040-()
725Z3050-()
725Z3060-()
Group 1, Configuration 3-4:
Table 4  
Part Number
721Z3030-()
721Z3040-()
721Z3050-()
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 6 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 7

Group 1, Configuration 3-4:
Table 4  
Part Number
721Z3060-()
B. CONCURRENT REQUIREMENTS
Certain actions in the service bulletins specified below must be done as specified in Planning Information
- Paragraph 5., Compliance and Accomplishment Instructions - Step 2., Work Instructions.
Table 5  
DescriptionService BulletinCompany
NACELLE - THRUST REVERSER -
OUTER V-BLADE INSPECTION (B787
Trent 1000)
787-R78-039 Rev 00, Dated
July 10, 2025
Collins Aerospace
NACELLE - THRUST REVERSER -
OUTER V-BLADE INSPECTION (B787
GEnx-1B)
787-G78-039 Rev 00, Dated
July 10, 2025
Collins Aerospace
C. COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Re-
quirements Bulletin B787-81205-SB780049-00 RB. The Airworthiness Directive will make the compliance
tasks and times given in Requirements Bulletin B787-81205-SB780049-00 RB mandatory.
Accomplish the required action, based on the applicable condition in Table 7 and Table 8 in accordance
with the Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Group 1, Configuration 1, 3:
Table 7  Left and Right Engine Thrust Reverser Halves – Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Within 12 months after
the Issue 001 date of
Requirements Bulletin
B787-81205-SB780049-
00 RB.
Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any crack.
ALL AIRPLANES
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 7 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 8

Group 1, Configuration 1, 3:
Table 7  Left and Right Engine Thrust Reverser Halves – Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 1 (ACTION
1): Do a surface High Fre-
quency Eddy Current
(HFEC) inspection at the
crack location.*[1]
CONDITION 1: ANY
CRACK FOUND
CONDITION 1 (ACTION
2): Do a surface HFEC in-
spection of the upper, cen-
ter, and lower segments of
the OVB inner radius for
any crack.*[1]*[2]
-Before further flight.Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 1.1: NO
CRACK FOUND AS A RE-
SULT OF CONDITION 1
(ACTION 1) AND CONDI-
TION 1 (ACTION 2)
2,000 TR flight cy-
cles.
-Repeat the DET of the up-
per, center, and lower seg-
ments of the OVB for any
crack.
CONDITION 1.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
-Before further flight.CONDITION 1.1.2 (AC-
TION 1): Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 1.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
2,000 TR flight cy-
cles.
-CONDITION 1.1.2 (AC-
TION 2): Repeat the DET
of the upper, center, and
lower segments of the OVB
for any crack.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 8 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 9

Group 1, Configuration 1, 3:
Table 7  Left and Right Engine Thrust Reverser Halves – Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 1.2 (ACTION
1): Replace affected Thrust
Reverser (TR) half with a
new or serviceable TR
half.*[3]
CONDITION 1.2: ANY
CRACK FOUND AS A RE-
SULT OF CONDITION 1
(ACTION 1) OR CONDI-
TION 1 (ACTION 2)
2,000 TR flight cy-
cles.
-CONDITION 1.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
-Before further flight.Do a surface HFEC inspec-
tion of the upper, center,
and lower segments of the
OVB inner radius for any
crack.
CONDITION 2: NO
CRACK FOUND
-Before further flightDo a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 2.1: NO
CRACK FOUND AS A RE-
SULT OF CONDITION 2
2,000 TR flight cy-
cles.
-Repeat the DET of the up-
per, center, and lower seg-
ments of the OVB for any
crack.
CONDITION 2.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
-Before further flight.CONDITION 2.1.2 (AC-
TION 1) Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 2.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
2,000 TR flight cy-
cles.
-CONDITION 2.1.2 (AC-
TION 2) Repeat the DET
of the upper, center, and
lower segments of the OVB
for any crack.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 9 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 10

Group 1, Configuration 1, 3:
Table 7  Left and Right Engine Thrust Reverser Halves – Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 2.2 (ACTION
1): Replace affected TR
half with a new or service-
able TR half.*[3]
CONDITION 2.2: ANY
CRACK FOUND AS A RE-
SULT OF CONDITION 2
2,000 TR flight cy-
cles.
-CONDITION 2.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
*[1]  A crack is defined as any discontinuity in the material that exceeds the Allowable Damage Limits defined by Surface Damage in
787 SRM 54-31-02 for Thrust Reverser V-Blade (GEnx Engines) and 787 SRM 54-32-02 for Thrust Reverser V-Blade (Rolls
Royce Trent 1000 Engines).
*[2]  If the result of the inspection required by CONDITION 1 (ACTION 1) is any crack found, it is acceptable to complete CONDITION
1 (ACTION 2) off-wing after completing CONDITION 1.2 (ACTION 1).
*[3]  A serviceable Thrust Reverser (TR) half is defined as a TR half that has accumulated less than 2,000 flight cycles since the ac-
complishment of the applicable inspection(s) specified in Requirements Bulletin B787-81205-SB780049-00 RB, and the TR upper,
center, and lower segments of the Outer V-Blade (OVB) are free of any crack.
Group 1, Configuration 2, 4:
Table 8  Left and Right Engine Thrust Reverser Halves - Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Whichever occurs first,Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any crack.
ALL AIRPLANES
1) Within 36 months after
the Issue 001 date of
Requirements Bulletin
B787-81205-SB780049-
00 RB.
2) Within 12 months after
accumulating 40,000 total
TR flight hours or 5,000
total TR flight cycles,
whichever occurs first.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 10 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 11

Group 1, Configuration 2, 4:
Table 8  Left and Right Engine Thrust Reverser Halves - Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 1 (ACTION
1): Do a surface High Fre-
quency Eddy Current
(HFEC) inspection at the
crack location.*[1]
CONDITION 1: ANY
CRACK FOUND
CONDITION 1 (ACTION
2): Do a surface HFEC in-
spection of the upper, cen-
ter, and lower segments of
the OVB inner radius for
any crack.*[1]*[2]
-Before further flight.Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 1.1: NO
CRACK FOUND AS A RE-
SULT OF CONDITION 1
(ACTION 1) AND CONDI-
TION 1 (ACTION 2)
2,000 TR flight cy-
cles.
-Repeat the DET of the up-
per, center, and lower seg-
ments of the OVB for any
crack.
CONDITION 1.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
-Before further flight.CONDITION 1.1.2 (AC-
TION 1) Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 1.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
2,000 TR flight cy-
cles.
-CONDITION 1.1.2 (AC-
TION 2) Repeat the DET
of the upper, center, and
lower segments of the OVB
for any crack.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 11 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 12

Group 1, Configuration 2, 4:
Table 8  Left and Right Engine Thrust Reverser Halves - Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 1.2 (ACTION
1): Replace affected Thrust
Reverser (TR) half with a
new or serviceable TR
half.*[3]
CONDITION 1.2: ANY
CRACK FOUND AS A RE-
SULT OF CONDITION 1
(ACTION 1) OR CONDI-
TION 1 (ACTION 2)
2,000 TR flight cy-
cles.
-CONDITION 1.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
-Before further flight.Do a surface HFEC inspec-
tion of the upper, center,
and lower segments of the
OVB inner radius for any
crack.
CONDITION 2: NO
CRACK FOUND
-Before further flight.Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 2.1: NO
CRACK FOUND AS A RE-
SULT OF CONDITION 2
2,000 TR flight cy-
cles.
-Repeat the DET of the up-
per, center, and lower seg-
ments of the OVB for any
crack.
CONDITION 2.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT FOUND
-Before further flight.CONDITION 2.1.2 (AC-
TION 1) Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 2.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT FOUND
2,000 TR flight cy-
cles.
-CONDITION 2.1.2 (AC-
TION 2) Repeat the DET
of the upper, center, and
lower segments of the OVB
for any crack.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 12 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 13

Group 1, Configuration 2, 4:
Table 8  Left and Right Engine Thrust Reverser Halves - Outer V-Blade Inspection
Repeat Interval
(Not to Exceed)
Boeing Recommended
Compliance Time
ActionCondition
-Before further flight.CONDITION 2.2 (ACTION
1): Replace affected TR
half with a new or service-
able TR half.*[3]
CONDITION 2.2: ANY
CRACK FOUND AS A RE-
SULT OF CONDITION 2
2,000 TR flight cy-
cles.
-CONDITION 2.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
*[1]  A crack is defined as any discontinuity in the material that exceeds the Allowable Damage Limits defined by Surface Damage in
787 SRM 54-31-02 for Thrust Reverser V-Blade (GEnx Engines) and 787 SRM 54-32-02 for Thrust Reverser V-Blade (Rolls
Royce Trent 1000 Engines).
*[2]  If the result of the inspection required by CONDITION 1 (ACTION 1) is any crack found, it is acceptable to complete CONDITION
1 (ACTION 2) off-wing after completing CONDITION 1.2 (ACTION 1).
*[3]  A serviceable Thrust Reverser (TR) half is defined as a TR half that has accumulated less than 2,000 flight cycles since the ac-
complishment of the applicable inspection(s) specified in Requirements Bulletin B787-81205-SB780049-00 RB, and the TR upper,
center, and lower segments of the Outer V-Blade (OVB) are free of any crack.
D. APPROVAL
This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes
specified in this document comply with the applicable regulations and are FAA approved, as well as European
Union Aviation Safety Agency (EASA) approved for all EASA approved airplanes listed in this Requirements
Bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery
configuration or as modified by other Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by
this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this Requirements Bulletin.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 13 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 14

E.    ACCOMPLISHMENT INSTRUCTIONS
1. GENERAL INFORMATION
NOTE: 1. This is an Enhanced Required for Compliance document. There will be a separate Service
Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an
Airworthiness Directive (AD), then all applicable requirements specified in the RB must
be done. In the RB, the "Refer to the listed procedures..." column of the table(s) in the
Work Instructions is for reference only. The procedures in that column are not required
by the AD and are for guidance only. For the related SB, some locations are marked RC
Start and RC End to identify the requirements that are restated from the RB. For the re-
lated SB, the areas between RC Start and RC End, including sub-steps and any figures
identified between RC Start and RC End, must be done to comply with the AD. Therefore,
an Alternative Method of Compliance (AMOC) is required for any deviations to steps be-
tween RC Start and RC End, including substeps and identified figures. For the related
SB, the steps not between RC Start and RC End may be deviated from using accepted
methods in accordance with the operator's maintenance or inspection program without
obtaining approval of an AMOC; this is provided that the steps between RC Start and RC
End, including sub-steps and identified figures, can still be done as specified, and the
airplane can be put back in an airworthy condition. Figures not required for compliance
are omitted from the RB.
2. This is an Enhanced Required for Compliance document. The Boeing processes used
to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the
information between "RC Start" and "RC End" in the SB are identical to the information
in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to
as the related document.
3. These work instructions refer to procedures included in other Boeing documents. When
the words "refer to" are used and the operator has an accepted alternative procedure,
the accepted alternative procedure can be used. When the words "in accordance with"
are included in the instruction, the procedure in the Boeing document must be used.
4. The compliance times for the actions in WORK INSTRUCTIONS are in Compliance.
5. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or
minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 14 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 15

– Values for structural fasteners are given in 787 SRM Chapter 51.
– Values for airframe maintenance tasks are included in Chapter 20 of 787 Aircraft
Maintenance Manual (AMM).
– Values for electrical maintenance tasks are included in Chapter 20 of Standard
Wiring Practices Manual (SWPM).
– Values for engine maintenance tasks are included in Chapter 70 of 787 Aircraft
Maintenance Manual (AMM).
– Non-standard torque values for maintenance tasks are included in the applicable
installation step.
6. A Detailed Inspection (DET) is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting is
normally supplemented with a direct source of good lighting at an intensity deemed ap-
propriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary.
Surface cleaning and elaborate procedures may be required.
7. If it is necessary to remove more parts for access, you can remove those parts. If you
can get access without removing identified parts, it is not necessary to remove all of the
identified parts. Jacking and shoring limitations must be observed.
8. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an OPTION
number, do all of the ACTION numbers for that CONDITION number or OPTION number.
2. WORK INSTRUCTIONS
A. Actions Required for Compliance
Group 1, Configuration 1-2:
(1) Group 1, Configuration 1-2:
Requirements
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 15 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 16

Group 1, Configuration 1-2:
Table 1  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any crack.
ALL AIRPLANES
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a.i., of
Collins Aerospace Service
Bulletin 787-R78-039 Rev
00, dated July 10, 2025.
CONDITION 1 (ACTION
1): Do a surface High Fre-
quency Eddy Current
(HFEC) inspection at the
crack location.*[1]
CONDITION 1: ANY
CRACK FOUND
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)b., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025
CONDITION 1 (ACTION
2): Do a surface HFEC in-
spection of the upper, cen-
ter, and lower segments of
the OVB inner radius for
any crack.*[1]*[2]
--Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 1.1: NO
CRACK FOUND AS A
RESULT OF CONDITION
1 (ACTION 1) AND CONDI-
TION 1 (ACTION 2)
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 16 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 17

Group 1, Configuration 1-2:
Table 1  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 3: CLOSE ACCESS-Repeat the DET of the up-
per, center, and lower
segments of the OVB for
any crack.
CONDITION 1.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT FOUND PART 1: OPEN ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.2)a., Steps i.
through v., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
CONDITION 1.1.2 (AC-
TION 1): Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 1.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT FOUND
PART 3: CLOSE ACCESS-
PART 1: OPEN ACCESS-CONDITION 1.1.2 (AC-
TION 2): Repeat the DET
of the upper, center, and
lower segments of the
OVB for any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 17 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 18

Group 1, Configuration 1-2:
Table 1  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 2: REPLACE
THRUST REVERSER
-CONDITION 1.2 (ACTION
1): Replace affected Thrust
Reverser (TR) half with a
new or serviceable TR
half.*[3]
CONDITION 1.2: ANY
CRACK FOUND AS A
RESULT OF CONDITION
1 (ACTION 1) OR CONDI-
TION 1 (ACTION 2)
PART 1: OPEN ACCESS-CONDITION 1.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)b., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
Do a surface HFEC inspec-
tion of the upper, center,
and lower segments of the
OVB inner radius for any
crack.
CONDITION 2: NO
CRACK FOUND
--Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 2.1: NO
CRACK FOUND AS A
RESULT OF CONDITION
2
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 18 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 19

Group 1, Configuration 1-2:
Table 1  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 3: CLOSE ACCESS-Repeat the DET of the up-
per, center, and lower
segments of the OVB for
any crack.
CONDITION 2.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT FOUND PART 1: OPEN ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.2)a., Steps i.
through v., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
CONDITION 2.1.2 (AC-
TION 1): Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 2.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT FOUND
PART 3: CLOSE ACCESS-
PART 1: OPEN ACCESS-CONDITION 2.1.2 (AC-
TION 2):Repeat the DET
of the upper, center, and
lower segments of the
OVB for any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 19 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 20

Group 1, Configuration 1-2:
Table 1  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 2: REPLACE
THRUST REVERSER
-CONDITION 2.2 (ACTION
1): Replace affected Thrust
Reverser (TR) half with a
new or serviceable TR
half. *[3]
CONDITION 2.2: ANY
CRACK FOUND AS A
RESULT OF CONDITION
2
PART 1: OPEN ACCESS-CONDITION 2.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-R78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
*[1]  A crack is defined as any discontinuity in the material that exceeds the Allowable Damage Limits defined by Surface Damage in 787
SRM 54-31-02 for Thrust Reverser V-Blade (GEnx Engines) and 787 SRM 54-32-02 for Thrust Reverser V-Blade (Rolls Royce Trent
1000 Engines).
*[2]  If the result of the inspection required by CONDITION 1 (ACTION 1) is any crack found, it is acceptable to complete CONDITION 1
(ACTION 2) off-wing after completing CONDITION 1.2 (ACTION 1).
*[3]  A serviceable Thrust Reverser (TR) half is defined as a TR half that has accumulated less than 2,000 flight cycles since the accom-
plishment of the applicable inspection(s) specified in Requirements Bulletin B787-81205-SB780049-00 RB, and the TR upper, center,
and lower segments of the Outer V-Blade (OVB) are free of any crack.
Group 1, Configuration 3-4:
(2) Group 1, Configuration 3-4:
Requirements
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 20 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 21

Group 1, Configuration 3-4:
Table 2  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 1: OPEN ACCESS-Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any crack.
ALL AIRPLANES
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a.i., of
Collins Aerospace Service
Bulletin 787-G78-039 Rev
00, dated July 10, 2025.
CONDITION 1 (ACTION
1): Do a surface High Fre-
quency Eddy Current
(HFEC) inspection at the
crack location.*[1]
CONDITION 1: ANY
CRACK FOUND
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)b., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
CONDITION 1 (ACTION
2): Do a surface HFEC in-
spection of the upper, cen-
ter, and lower segments of
the OVB inner radius for
any crack.*[1]*[2]
--Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 1.1: NO
CRACK FOUND AS A
RESULT OF CONDITION
1 (ACTION 1) AND CONDI-
TION 1 (ACTION 2)
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 21 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 22

Group 1, Configuration 3-4:
Table 2  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 3: CLOSE ACCESS-Repeat the DET of the up-
per, center, and lower
segments of the OVB for
any crack.
CONDITION 1.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT FOUND PART 1: OPEN ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.2)a., Steps i.
through v., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
CONDITION 1.1.2 (AC-
TION 1): Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 1.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT FOUND
PART 3: CLOSE ACCESS-
PART 1: OPEN ACCESS-CONDITION 1.1.2 (AC-
TION 2): Repeat the DET
of the upper, center, and
lower segments of the
OVB for any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 22 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 23

Group 1, Configuration 3-4:
Table 2  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 2: REPLACE
THRUST REVERSER
-CONDITION 1.2 (ACTION
1): Replace affected Thrust
Reverser (TR) half with a
new or serviceable TR
half.*[3]
CONDITION 1.2: ANY
CRACK FOUND AS A
RESULT OF CONDITION
1 (ACTION 1) OR CONDI-
TION 1 (ACTION 2)
PART 1: OPEN ACCESS-CONDITION 1.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)b., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
Do a surface HFEC inspec-
tion of the upper, center,
and lower segments of the
OVB inner radius for any
crack.
CONDITION 2: NO
CRACK FOUND
--Do a Detailed Inspection
(DET) of the upper, center,
and lower segments of the
Outer V-Blade (OVB) for
any worn and missing Dry
Film Lubricant within the
area identified in Figure 6
of the applicable Collins
Aerospace Service Bulletin
listed in the concurrent re-
quirements.
CONDITION 2.1: NO
CRACK FOUND AS A
RESULT OF CONDITION
2
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 23 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 24

Group 1, Configuration 3-4:
Table 2  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 3: CLOSE ACCESS-Repeat the DET of the up-
per, center, and lower
segments of the OVB for
any crack.
CONDITION 2.1.1: NO
WORN OR MISSING DRY
FILM LUBRICANT FOUND PART 1: CLOSE ACCESS
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.2)a., Steps i.
through v., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
CONDITION 2.1.2 (AC-
TION 1): Restore Dry Film
Lubricant at affected loca-
tion(s).
CONDITION 2.1.2: ANY
WORN OR MISSING DRY
FILM LUBRICANT
FOUND.
PART 3: CLOSE ACCESS-
PART 1: OPEN ACCESS-CONDITION 2.1.2 (AC-
TION 2):Repeat the DET
of the upper, center, and
lower segments of the
OVB for any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025.
PART 3: CLOSE ACCESS-
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 24 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

### Page 25

Group 1, Configuration 3-4:
Table 2  Left and Right Thrust Reverser Halves - Outer V-Blade Inspection
Refer to the listed proce-
dures in SB B787-81205-
SB780049-00 Issue 001
or later approved issues
as an accepted proce-
dure
Method of ComplianceActionCondition
PART 2: REPLACE
THRUST REVERSER
-CONDITION 2.2 (ACTION
1): Replace affected TR
half with a new or service-
able TR half.*[3]
CONDITION 2.2: ANY
CRACK FOUND AS A
RESULT OF CONDITION
2
PART 1: OPEN ACCESS-CONDITION 2.2 (ACTION
2): Repeat the DET of the
upper, center, and lower
segments of the OVB for
any crack.
-In accordance with AC-
COMPLISHMENT IN-
STRUCTIONS PARA-
GRAPH 3.C.1)a., of Collins
Aerospace Service Bulletin
787-G78-039 Rev 00, dat-
ed July 10, 2025
PART 3: CLOSE ACCESS-
*[1]  A crack is defined as any discontinuity in the material that exceeds the Allowable Damage Limits defined by Surface Damage in 787
SRM 54-31-02 for Thrust Reverser V-Blade (GEnx Engines) and 787 SRM 54-32-02 for Thrust Reverser V-Blade (Rolls Royce Trent
1000 Engines).
*[2]  If the result of the inspection required by CONDITION 1 (ACTION 1) is any crack found, it is acceptable to complete CONDITION 1
(ACTION 2) off-wing after completing CONDITION 1.2 (ACTION 1).
*[3]  A serviceable Thrust Reverser (TR) half is defined as a TR half that has accumulated less than 2,000 flight cycles since the accom-
plishment of the applicable inspection(s) specified in Requirements Bulletin B787-81205-SB780049-00 RB, and the TR upper, center,
and lower segments of the Outer V-Blade (OVB) are free of any crack.
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00
AM
Page 25 of 25
Export Controlled ECCN: 9E991
See page 1 for details
B787-81205-SB780049-00 RB
Issue 001, 12 Aug 2025 12:00:00 AM
REQUIREMENTS BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
