# Boeing Alert Service Bulletin MD80-53A316: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2017-0503; AD 2017-17-19 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin MD80-53A316](https://openairdocs.org/service-documents/boeing/md80-53a316.md)
- Title as filed: SB-MD80-53A316-00--
- Pages: 26
- PDF: https://openairdocs.org/files/sha256/a0/82/a0829b2849517a8e645ff7344adce8715069ae53203e5ba384880510009c82a6
- Page: https://openairdocs.org/service-documents/boeing/md80-53a316/file/a0829b284951

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
Number: MD80-53A316
Original Issue: December 15, 2016
ATA System: 5313
SUBJECT: FUSELAGE - Fuselage, Tail Section - Inspect Cant Station 1463 Bulkhead, DC-9-87
(MD-87) Cant Station 1254 Bulkhead
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2016 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: December 15, 2016
MD80-53A316
1 of 26
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
2 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. PLANNING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Effectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1. Airplanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Spares Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B. Concurrent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C. Reason . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
D. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
E. Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
F. Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
G. Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
H. Weight and Balance Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
I. Electrical Load Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
J. References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1. Existing Data: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Data Supplied with this Service Bulletin: . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3. Installation Drawings Used in the Preparation of this Service Bulletin: . . . . . . . . . . . 15
K. Publications Affected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
L. Interchangeability and Intermixability of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
M. Software Accomplishment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2. MATERIAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
A. Material - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
B. Industry Support Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
C. Parts Necessary for Each Airplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1. Kits/Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Parts and Materials Supplied by the Operator . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Parts Modified and Reidentified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4. Parts Removed and Not Replaced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
D. Parts Necessary to Change Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
E. Special Tooling - Price and Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
F. Special Tooling Necessary to do this Service Bulletin . . . . . . . . . . . . . . . . . . . . . . . 17
3. ACCOMPLISHMENT INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
A. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
B. WORK INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FIGURE 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD - LEFT SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
FIGURE 2: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD - RIGHT SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
APPENDIX A: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
3 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
4 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
SummaryNumber: MD80-53A316Original Issue: December 15, 2016
ATA System: 5313
SUBJECT: FUSELAGE - Fuselage, Tail Section - Inspect Cant Station 1463 Bulkhead, DC-9-87
(MD-87) Cant Station 1254 Bulkhead
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
An MD-80 operator reported cracking of various structure in the MD-80 fuselage Cant STA 1463 Bulkhead,
DC-9-87 (MD-87) Cant STA 1254 Bulkhead. The cracking was discovered during a heavy maintenance visit on
an airplane with 63,480 total flight-hours, and 45,809 total flight cycles. The cracks were in the upper left area
of the bulkhead, between Longerons L-2 and L-3, in the frame web, horizontal stiffeners, lower frame cap, rear
spar cap, and spar cap web. Boeing analysis has determined that the operational and limit loads cannot duplicate
this condition and the root cause is suspected to be the result of a High Load Event(s) based on service
experience. Cracking of the bulkhead, if undetected, may result in the inability of the structure to sustain limit
loads, and could adversely affect the structural integrity of the airplane.
Boeing Service Related Problem (SRP) MD80-SRP-53-0540 is related to this service bulletin.
Boeing Communication Systems (BCS) Message Number MOM-MOM-16-0684-01B is related to this service
bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
5 of 26

### Page 6

ReferenceAffectedPlanning Data
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION
On the left and right sides, do a detailed inspection of the forward and aft surfaces of Cant STA 1463 Bulkhead,
DC-9-87 (MD-87) Cant STA 1254 Bulkhead, for any crack in the upper caps, upper (cap) doublers, bulkhead
webs and doublers, stiffeners, lower caps, and vertical stabilizer rear spar caps and webs, between longerons
L-11L through L-11R.
If any crack is found in the stiffener, web, doubler, or cap, repair in accordance with DC-9/MD-80 SRM 51-70-04
or DC-9/MD-80 SRM 53-03.
If any crack is found that cannot be repaired in accordance with DC-9/MD-80 SRM 51-70-04, or DC-9/MD-80
SRM 53-03, contact The Boeing Company for repair instructions and do the repair.
If no crack is found, no further action is required.
EFFECTIVITY
All DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes. Refer to
Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
6 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 7 (OCR)

BOEING SERVICE BULLETIN MD80-53A316
ALERT  ALERT
CANT STA 1463
DC-9-87 (MD-87) CANT STA 1254
ON THE LEFT AND RIGHT SIDES, DO A DETAILED INSPECTION OF THE
FORWARD AND AFT SURFACES OF CANT STA 1463 BULKHEAD, DC-9-87
LONER CAPT AN VERTICAL STAI HER NEAR SPAR CAPE AND VESTS.  BETWEEN LONGERONS L-11L THROUGH L-11R.
2538535
Original Issue: December 15, 2016
Export Controlled ECCN: 9E991 - BOEING  MD80-53A316
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  7 of 26

### Page 8

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
8 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT
BLANK PAGE

### Page 9

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
Number: MD80-53A316
Original Issue: December 15, 2016
ATA System: 5313
SUBJECT: FUSELAGE - Fuselage, Tail Section - Inspect Cant Station 1463 Bulkhead, DC-9-87
(MD-87) Cant Station 1254 Bulkhead
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE
NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is applicable to all DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83),
DC-9-87 (MD-87), and MD-88 Airplanes. The line numbers are 909 through 2287 in 1 Group. The
Variable Numbers and Group Information for the applicable airplanes is given below.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP
All DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87
(MD-87), and MD-88 Airplanes.
-1
Airplane Models:
DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), MD-88
GroupFuselage Num-
ber
1909
1917
1924
1938
1941
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
9 of 26

### Page 10

GroupFuselage Num-
ber
1944
1946
1948
1950
1952 - 953
1955
1957 - 958
1960
1962 - 963
1965 - 967
1969
1970 - 971
1973 - 975
1977 - 979
1981
1983
1985 - 986
1988 - 989
1991 - 992
1994 - 999
11000 - 1013
11015 - 1016
11018 - 1020
11022 - 1023
11025 - 1026
11028 - 1029
11031 - 1032
11034 - 1035
11037 - 1038
11040 - 1041
11043
11045
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
10 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 11

GroupFuselage Num-
ber
11047
11049
11051
11053
11055
11057
11059 - 1080
11082 - 1083
11085 - 1099
11100 - 1199
11200 - 1299
11300 - 1399
11400 - 1499
11500 - 1599
11600 - 1699
11700 - 1799
11800 - 1899
11900 - 1999
12000 - 2007
12009 - 2016
12019 - 2034
12036 - 2069
12071 - 2093
12101 - 2114
12116
12118 - 2119
12121
12124
12127 - 2128
12130
12132
12134 - 2135
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
11 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 12

GroupFuselage Num-
ber
12137
12139
12145
12148
12151 - 2152
12155
12167
12174
12176
12178
12180
12183
12185
12187
12189
12192
12196
12199
12201
12204
12206
12208
12214
12218
12234
12239
12241
12244
12247
12249
12252
12254
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
12 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 13

GroupFuselage Num-
ber
12264 - 2287
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
An MD-80 operator reported cracking of various structure in the MD-80 fuselage Cant STA 1463
Bulkhead, DC-9-87 (MD-87) Cant STA 1254 Bulkhead. The cracking was discovered during a heavy
maintenance visit on an airplane with 63,480 total flight-hours, and 45,809 total flight cycles. The cracks
were in the upper left area of the bulkhead, between Longerons L-2 and L-3, in the frame web, horizontal
stiffeners, lower frame cap, rear spar cap, and spar cap web. Boeing analysis has determined that the
operational and limit loads cannot duplicate this condition and the root cause is suspected to be the
result of a High Load Event(s) based on service experience. Cracking of the bulkhead, if undetected,
may result in the inability of the structure to sustain limit loads, and could adversely affect the structural
integrity of the airplane.
Boeing Service Related Problem (SRP) MD80-SRP-53-0540 is related to this service bulletin.
Boeing Communication Systems (BCS) Message Number MOM-MOM-16-0684-01B is related to this
service bulletin.
D. Description
On the left and right sides, do a detailed inspection of the forward and aft surfaces of Cant STA 1463
Bulkhead, DC-9-87 (MD-87) Cant STA 1254 Bulkhead, for any crack in the upper caps, upper (cap)
doublers, bulkhead webs and doublers, stiffeners, lower caps, and vertical stabilizer rear spar caps
and webs, between longerons L-11L through L-11R.
If any crack is found in the stiffener, web, doubler, or cap, repair in accordance with DC-9/MD-80 SRM
51-70-04 or DC-9/MD-80 SRM 53-03.
If any crack is found that cannot be repaired in accordance with DC-9/MD-80 SRM 51-70-04, or
DC-9/MD-80 SRM 53-03, contact The Boeing Company for repair instructions and do the repair.
If no crack is found, no further action is required.
The work in this service bulletin is done in the maintenance zone(s) given below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
13 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 14

Affected Maintenance Zones
ZoneModel
61DC-9-81 (MD-81), DC-9-82
(MD-82), DC-9-83 (MD-83), DC-
9-87 (MD-87), MD-88
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
A logic diagram showing compliance tasks and compliance times is included as an aid in APPENDIX
A.
Table 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD
Repeat Interval
(Not to Exceed)
Compliance TimeActionCondition
-Within 700 flight cycles
or 6 months after the
original issue date of
this service bulletin,
whichever occurs first.
Do PART 1: DETAILED IN-
SPECTION OF CANT STA
1463 BULKHEAD, DC-9-87
(MD-87) CANT STA 1254
BULKHEAD, for any crack.
All airplanes
-Before further flight.Repair the stiffener, web, dou-
bler, or cap.
CONDITION 1: ANY CRACK
FOUND IN THE STIFFENER,
WEB, DOUBLER, OR CAP
--No further action is required.CONDITION 2: NO CRACK
FOUND
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
14 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 15

G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools
Elapsed HoursTask HoursNumber of PersonsTask
0.500.501Open Access
1.001.001FIGURE 1
1.001.001FIGURE 2
0.500.501Close Access
3.003.00TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Standard Overhaul Practices Manual (SOPM) 20-50-01
b. DC-9/MD-80 Structural Repair Manual (SRM) 51-70-04, 53-03, Chapter 51
c. MD-80 Aircraft Maintenance Manual (AMM) 52-12-00
d. Boeing Communication Systems (BCS) Message Number MOM-MOM-16-0684-01B
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
15 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 16

K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
16 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 17

2.    MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
Boeing warranty remedies are not available for the inspections given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
No special parts or materials are necessary to do the change in this service bulletin. But, parts
and materials in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator part and material supply to make sure all necessary parts and materials are available.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
17 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 18

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
18 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT
BLANK PAGE

### Page 19

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
WARNING: WHILE YOU DO WORK IN THE TAILCONE AREA, MAKE SURE THAT YOU OBEY
ALL SAFETY PRECAUTIONS. IF YOU DO NOT OBEY THE PRECAUTIONS, DEATH
OR INJURY TO PERSONS CAN OCCUR.
WARNING: IF ELECTRICAL POWER IS APPLIED TO THE AIRPLANE, MAKE SURE YOU OBEY
ALL PRECAUTIONS WHILE YOU DO WORK. IF YOU DO NOT OBEY THE
PRECAUTIONS, DEATH OR INJURY TO PERSONS, AND DAMAGE TO THE AIRPLANE
CAN OCCUR.
CAUTION: ELECTRICALLY GROUND THE AIRPLANE. THIS WILL HELP TO PREVENT DAMAGE
TO THE AIRPLANE OR EQUIPMENT.
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Equivalent parts are listed in the AEPL, Drawing 7595071.
3. Use the approved fastener and process material substitutions, in accordance with
DC-9/MD-80 SRM Chapter 51.
4. If the length of any fastener specified in this service bulletin does not meet installation
standards given in Structural Repair Manual (SRM) Chapter 51, then a fastener of
the same specification, or an approved substitute, with a length which meets the
installation standards given in SRM Chapter 51 may be used. In addition, washers
may be installed for fastener grip length in accordance with SRM Chapter 51. Refer
to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation
in this service bulletin.
5. A 1/8-inch thick stack of the same type washers called for in this service bulletin is
the maximum thickness which may be used under fastener head or nut to counteract
accumulation of tolerances.
EXCEPTION: When the available fastener length increments are greater than
1/16-inch, a 3/16-inch thick stack of the same type washers may be used.
6. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch.
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are in DC-9/MD-80 SRM Chapter 51
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
19 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 20

– Torque Values:
— Values for structural fasteners are given in MD-80 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of MD-80
Aircraft Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of MD-80
Aircraft Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
7. Obey all of the warnings and cautions given in the specified manual sections.
8. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
10. Refer to APPENDIX A for logic diagram. Logic diagrams are provided as an aid only.
Information contained in Paragraph 1.E., Compliance is the primary source for
compliance times. Information in Paragraph 3.B., Work Instructions is the primary
source for tasks required for compliance.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Use of colors in Figures is based on guidance from the ATA e-Business Program
(ATA) iSpec 2200.
13. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
14. Some steps in the Work Instructions are labeled as Required for Compliance (RC).
If this service bulletin is mandated by an Airworthiness Directive (AD), then the steps
labeled as RC, including sub-steps under an RC step and any figures identified in
an RC step, must be done to comply with the AD. If a step or sub-step is labeled
"RC Exempt," then the RC requirement is removed from that step or sub-step. An
Alternative Method of Compliance (AMOC) is required for any deviations to RC steps,
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
20 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 21

including sub-steps and identified figures. Steps not labeled as RC may be deviated
from using accepted methods in accordance with the operator's maintenance or
inspection program without obtaining approval of an AMOC. This is provided that
the RC steps, including sub-steps and identified figures, can still be done as specified,
and the airplane can be put back in an airworthy condition.
B. WORK INSTRUCTIONS
1. Open access to the inspection area through the aft entrance door. Refer to MD-80 AMM 52-12-00,
as an accepted procedure.
2. RC - Do PART 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87)
CANT STA 1254 BULKHEAD, for any crack.
a. CONDITION 1: ANY CRACK FOUND IN THE STIFFENER, WEB, DOUBLER, OR CAP
(1) Repair the stiffener, web, doubler, or cap in accordance with DC-9/MD-80 SRM 51-70-04
or DC-9/MD-80 SRM 53-03.
(2) If any crack is found that cannot be repaired in accordance with DC-9/MD-80 SRM
51-70-04 or DC-9/MD-80 SRM 53-03, contact The Boeing Company for repair instructions
and do the repair.
b. CONDITION 2: NO CRACK FOUND
(1) No further action is required.
3. Close access to the inspection area through the aft entrance door. Refer to MD-80 AMM 52-12-00,
as an accepted procedure.
4. Put the airplane back to a serviceable condition.
PART 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA
1254 BULKHEAD
1. Do a detailed inspection of left side Cant STA 1463 Bulkhead, DC-9-87 (MD-87) Cant STA 1254
Bulkhead, in accordance with FIGURE 1.
2. Do a detailed inspection of right side Cant STA 1463 Bulkhead, DC-9-87 (MD-87) Cant STA 1254
Bulkhead, in accordance with FIGURE 2.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
21 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 22 (OCR)

BOEING SERVICE BULLETIN MD80-53A316
ALERT  ALERT
CANT STA 1463
DC-9-87 (MD-87) CANT STA 1254
L-3L
INBD
A-A  2538625
FIGURE 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD - LEFT SIDE
(SHEET 1 OF 2)
Original Issue: December 15, 2016
PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  MD80-53A316
Work - See page 1 for details.  22 of 26

### Page 23

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each figure.
More DataQtyIdentificationNameTaskStep
(a)19953015-67 OR
5967034-1 OR
9953015-5 OR
9911839-13
CAPInspect1
(a)19953015-69 OR
5967035-1 OR
9953015-25 OR
9911839-19
DOUBLERInspect2
(a)19911958-503 OR
9911958-501
CAPInspect3
(a)19953015-53 OR
9953015-35 OR
9953015-3 OR
9911839-235
WEBInspect4
(a) (b)19953015-37 OR
9953015-15
DOUBLERInspect5
(a)19953015-57 OR
9953015-39 OR
9953015-17 OR
9911839-209
WEBInspect6
(a)19911834-209WEBInspect7
(a)19953015-41 OR
9953015-13 OR
9911839-25
STIFFENERInspect8
(a)15911384-15 OR
5911384-19 OR
5911384-7
CAPInspect9
(a) Do a detailed inspection of the left side Cant STA 1463 Bulkhead, DC-9-87 (MD-87) Cant STA 1254
Bulkhead, forward and aft surfaces, for any crack in the upper caps, upper (cap) doublers, bulkhead webs
and doublers, stiffeners, lower caps, and vertical stabilizer rear spar caps and webs, between Longerons
L-11L through L-1.
(b) This part may or may not have been installed in production due to different airplane model and configura-
tions.
FIGURE 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD - LEFT SIDE
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
23 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 24 (OCR)

BOEING SERVICE BULLETIN MD80-53A316
ALERT  ALERT
CANT STA 1463
DC-9-87 (MD-87) CANT STA 1254
_-9R
-11R
INBD
A-A  2538629
FIGURE 2: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD - RIGHT SIDE
(SHEET 1 OF 2)
Original Issue: December 15, 2016
Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  MD80-53A316
Work - See page 1 for details.  24 of 26

### Page 25

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each figure.
More DataQtyIdentificationNameTaskStep
(a)19953015-67 OR
5967034-1 OR
9953015-5 OR
9911839-13
CAPInspect1
(a)19953015-69 OR
5967035-1 OR
9953015-25 OR
9911839-19
DOUBLERInspect2
(a)19911958-503 OR
9911958-501
CAPInspect3
(a)19953015-53 OR
9953015-35 OR
9953015-3 OR
9911839-235
WEBInspect4
(a) (b)19953015-38 OR
9953015-15
DOUBLERInspect5
(a)19953015-58 OR
9953015-40 OR
9953015-18 OR
9911839-210
WEBInspect6
(a)19911834-209WEBInspect7
(a)19953015-41 OR
9953015-13 OR
9911839-25
STIFFENERInspect8
(a)15911384-16 OR
5911384-20 OR
5911384-8
CAPInspect9
(a) Do a detailed inspection of the right side Cant STA 1463 Bulkhead, DC-9-87 (MD-87) Cant STA 1254
Bulkhead, forward and aft surfaces, for any crack in the upper caps, upper (cap) doublers, bulkhead webs
and doublers, stiffeners, lower caps, and vertical stabilizer rear spar caps and webs, between Longerons
L-11R through L-1.
(b) This part may or may not have been installed in production due to different airplane model and configura-
tions.
FIGURE 2: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA 1254
BULKHEAD - RIGHT SIDE
(SHEET 2 OF 2)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
25 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

### Page 26

Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source
for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle
PART 1: DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-
87 (MD-87) CANT STA 1254 BULKHEAD
PART 1
ANY CRACK FOUND IN THE STIFFENER, WEB, DOUBLER, OR CAPCONDITION 1
NO CRACK FOUNDCONDITION 2
APPENDIX A:  DETAILED INSPECTION OF CANT STA 1463 BULKHEAD, DC-9-87 (MD-87) CANT STA
1254 BULKHEAD
(SHEET 1 OF 1)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: December 15, 2016
MD80-53A316
26 of 26
BOEING SERVICE BULLETIN MD80-53A316
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
