# Boeing Alert Service Bulletin MD80-55A070: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0451; AD 2014-21-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Alert Service Bulletin MD80-55A070](https://openairdocs.org/service-documents/boeing/md80-55a070.md)
- Title as filed: Boeing - SB-MD80-55A070-01
- Pages: 53
- PDF: https://openairdocs.org/files/sha256/a2/61/a2619570f518b2aa96d33a60f0878dbffc843113e36ab6413033d98cf331a6c3
- Page: https://openairdocs.org/service-documents/boeing/md80-55a070/file/a2619570f518

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
Number: MD80-55A070
Original Issue: May 22, 2013
Revision 1: December 17, 2013
ATA System: 5510
SUBJECT: STABILIZERS - Horizontal Stabilizer - Inspect/Replace Upper Rear Spar Cap at Aft
Barrel Nut Holes
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2013 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
1 of 53
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
2 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 5
B. Concurrent Requirements ...................................... 1 6
C. Reason ................................................ 1 6
D. Description .............................................. 1 6
E. Compliance .............................................. 1 7
F. Approval ............................................... 2 2
G. Manpower .............................................. 2 2
H. Weight and Balance Changes .................................... 2 5
I. Electrical Load Data ......................................... 2 5
J. References .............................................. 2 5
1. Existing Data: ......................................... 2 5
2. Data Supplied with this Service Bulletin: ........................... 2 5
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 6
4. Process Data: ......................................... 2 6
K. Publications Affected ........................................ 2 6
L. Interchangeability and Intermixability of Parts ........................... 2 6
M. Software Accomplishment Summary ................................ 2 6
2. MATERIAL INFORMATION ........................................ 2 7
A. Material - Price and Availability ................................... 2 7
B. Industry Support Information .................................... 2 7
C. Parts Necessary for Each Airplane ................................. 2 7
1. Kits/Parts ............................................ 2 7
2. Parts and Materials Supplied by the Operator ........................ 3 6
3. Parts Modified and Reidentified ................................ 3 6
4. Parts Removed and Not Replaced .............................. 3 6
D. Parts Necessary to Change Spares ................................. 3 7
E. Special Tooling - Price and Availability ............................... 3 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9
A. GENERAL INFORMATION ..................................... 3 9
B. WORK INSTRUCTIONS ....................................... 4 0
FIGURE 1: REMOVE SKIN FILLER .................................... 4 5
FIGURE 2: INSPECTION SURFACE AREA - PREPARATION ...................... 4 8
FIGURE 3: HIGH FREQUENCY EDDY CURRENT INSPECTION .................... 5 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
3 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 4

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
4 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT
BLANK PAGE

### Page 5

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
Revision Transmittal SheetNumber: MD80-55A070Original Issue: May 22, 2013
Revision 1: December 17, 2013
ATA System: 5510
SUBJECT: STABILIZERS - Horizontal Stabilizer - Inspect/Replace Upper Rear Spar Cap at Aft
Barrel Nut Holes
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
No more work is necessary on the airplane(s) changed or inspected in accordance with the original issue of this
service bulletin.
REASON FOR REVISION
Revision 1 is sent to correct Paragraph 1.E., Compliance Tables 1 and 2 group configuration headings and
Table 1 initial inspections thresholds.
Terminology has been changed in the Work Instructions to agree with the terminology defined in Paragraph
3.A., General Information - Notes.
These sections were changed:
1. In Paragraph 1.E., Compliance, changed Table 1 and Table 2 group configuration headings and Table
1 initial inspection thresholds.
2. Figure 2, changed art and split footnote (a) into footnote (a) and (b).
3. Figure 3, changed art and footnoe (c).
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
May 22, 2013Original Issue:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
5 of 53

### Page 6

December 17, 2013Revision 1:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
6 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 7

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
SummaryNumber: MD80-55A070Original Issue: May 22, 2013
Revision 1: December 17, 2013
ATA System: 5510
SUBJECT: STABILIZERS - Horizontal Stabilizer - Inspect/Replace Upper Rear Spar Cap at Aft
Barrel Nut Holes
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
CONCURRENT REQUIREMENTS
None
BACKGROUND
During the inspections called for in Service Bulletin MD80-55A065, two operators reported finding cracks
emanating from the left and right upper rear spar cap aft-most barrel nut holes of the horizontal stabilizer. One
airplane had accumulated 40,144 flight hours and 32,253 landing cycles, while the other airplane had accumulated
58,296 flight hours and 43,512 landing cycles. In both cases, the affected part was removed from the airplane
and submitted to Boeing for evaluation. Investigation by Boeing has determined that the cracks are caused by
fatigue. In both cases, the cracks originated inside the barrel nut holes, and radiated vertically and in the aft
direction from the barrel nut holes. If not corrected, these cracks may propagate until it severs the upper rear
spar cap which may result in the failure of the horizontal stabilizer upper center or aft skin panel, adversely
affecting the structural integrity of the airplane.
Boeing Fleet Team Digest (FTD) MD-80 FTD 55-12002 is related to this service bulletin.
ACTION
This service bulletin provides instructions to perform a High Frequency Eddy Current (ETHF) inspection on the
left and right upper rear spar cap aft-most barrel nut holes for crack(s), and does as follows:
Group 1, Configuration 1, 3:
Condition 1 - No Crack Found
Repeats ETHF inspection at defined intervals.
Condition 2 - Any Crack Found
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
7 of 53

### Page 8

NOTE: Both Options affect the inspection requirements contained in Service Bulletin MD80-55A065, and will
affect compliance with Federal Aviation Administration Airworthiness Directive AD 2007-10-04 as it
relates to the upper rear spar cap. Operators are urged to consider both this service bulletin and Service
Bulletin MD80-55A065 while choosing an option.
Option 1
1) Does a splice repair of the horizontal stabilizer upper rear spar cap.
2) Repeats ETHF inspection at defined intervals until replacement of upper rear spar cap.
Option 2
1) Replaces the horizontal stabilizer upper rear spar cap.
2) Repeats ETHF inspection at defined intervals.
Group 1, Configuration 2, 4:
Condition 1 - No Crack Found
Repeats ETHF inspection at defined intervals.
Condition 2 - Any Crack Found
NOTE: Both Options affect the inspection requirements contained in Service Bulletin MD80-55A065, and will
affect compliance with FAA AD 2007-10-04 as it relates to the upper rear spar cap. Operators are urged
to consider both this service bulletin and Service Bulletin MD80-55A065 while choosing an option.
Option 1
1) Does a splice repair of the horizontal stabilizer upper rear spar cap.
2) Installs new Forcemate bushing
3) Repeats ETHF inspection at defined intervals until replacement of upper rear spar cap.
Option 2
1) Replaces the horizontal stabilizer upper rear spar cap.
2) Installs new Forcemate bushing
3) Repeats ETHF inspection at defined intervals.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
8 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 9

EFFECTIVITY
All DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), MD-88 Airplane(s). Refer to
Paragraph 1.A.1., Airplanes, for the list of affected airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service
bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
9 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 10 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
INSPECT/REPLACE UPPER REAR SPAR
CAP AT AFT BARREL NUT HOLES
2244834
Original Issue: May 22, 2013
Revision 1: December 17, 2013  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  MD80-55A070
Work - See page 1 for details.  10 of 53

### Page 11

Commercial 
Airplanes
MD80
Service Bulletin
ALERT
Number: MD80-55A070
Original Issue: May 22, 2013
Revision 1: December 17, 2013
ATA System: 5510
SUBJECT: STABILIZERS - Horizontal Stabilizer - Inspect/Replace Upper Rear Spar Cap at Aft
Barrel Nut Holes
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO
THE NEW OWNER.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
11 of 53

### Page 12

DESCRIPTIONCONFIGURATIONGROUP
All Airplanes-1
Airplanes Not Having Accomplished an Upper Rear Spar Cap Splice
Repair or Upper Rear Spar Cap Replacement in Accordance With
Service Bulletin MD80-55A065 or other service action
1
Airplanes Not Having Accomplished an Upper Rear Spar Cap Splice
Repair or Upper Rear Spar Cap Replacement And Having Forcemate
Bushings Installed in Spar Web in Accordance With Service Bulletin
MD80-55A065 Revision 1 or other service action
2
Airplanes Having Accomplished an Upper Rear Spar Cap Splice
Repair or Upper Rear Spar Cap Replacement in Accordance With
Service Bulletin MD80-55A065 or other service action
3
Airplanes Having Accomplished an Upper Rear Spar Cap Splice
Repair or Upper Rear Spar Cap Replacement And Having Forcemate
Bushings Installed in Spar Web in Accordance With Service Bulletin
MD80-55A065 Revision 1 or other service action
4
Airplane Models:
DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), MD-88
GroupFuselage Num-
ber
1909
1917
1924
1938
1941
1944
1946
1948
1950
1952 - 953
1955
1957 - 958
1960
1962 - 963
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
12 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 13

GroupFuselage Num-
ber
1965 - 967
1969
1970 - 971
1973 - 975
1977 - 979
1981
1983
1985 - 986
1988 - 989
1991 - 992
1994 - 999
11000 - 1013
11015 - 1016
11018 - 1020
11022 - 1023
11025 - 1026
11028 - 1029
11031 - 1032
11034 - 1035
11037 - 1038
11040 - 1041
11043
11045
11047
11049
11051
11053
11055
11057
11059 - 1080
11082 - 1083
11085 - 1099
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
13 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 14

GroupFuselage Num-
ber
11100 - 1199
11200 - 1299
11300 - 1399
11400 - 1499
11500 - 1599
11600 - 1699
11700 - 1799
11800 - 1899
11900 - 1999
12000 - 2007
12009 - 2016
12019 - 2034
12036 - 2069
12071 - 2093
12101 - 2114
12116
12118 - 2119
12121
12124
12127 - 2128
12130
12132
12134 - 2135
12137
12139
12145
12148
12151 - 2152
12155
12167
12174
12176
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
14 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 15

GroupFuselage Num-
ber
12178
12180
12183
12185
12187
12189
12192
12196
12199
12201
12204
12206
12208
12214
12218
12234
12239
12241
12244
12247
12249
12252
12254
12264 - 2287
2. Spares Affected
Examine your spares supply for the parts or components identified below. If any parts or components
are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number
5930603-(xxx) Stabilizer Assembly, Complete
(xxx) denotes any configuration.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
15 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 16

B. Concurrent Requirements
None.
C. Reason
During the inspections called for in Service Bulletin MD80-55A065, two operators reported finding
cracks emanating from the two upper rear spar cap aft-most barrel nut holes of the horizontal stabilizer.
One airplane had accumulated 40,144 flight hours and 32,253 landing cycles, while the other airplane
had accumulated 58,296 flight hours and 43,512 landing cycles. In both cases, the affected part was
removed from the airplane and submitted to Boeing for evaluation. Investigation by Boeing has
determined that the cracks are caused by fatigue. In both cases, the cracks originated inside the barrel
nut holes, and radiated vertically and in the aft direction from the barrel nut holes. If not corrected, these
cracks may propagate until it severs the upper rear spar cap which may result in the failure of the
horizontal stabilizer upper center or aft skin panel, adversely affecting the structural integrity of the
airplane.
Boeing Fleet Team Digest (FTD) MD-80 FTD 55-12002 is related to this service bulletin.
Revision 1 is sent to correct Paragraph 1.E., Compliance Tables 1 and 2 group configuration headings
and Table 1 initial inspections thresholds.
D. Description
This service bulletin provides instructions to perform a High Frequency Eddy Current (ETHF) inspection
on the left and right upper rear spar cap aft-most barrel nut holes for crack(s), and does as follows:
Group 1, Configuration 1, 3:
Condition 1 - No Crack Found
Repeats ETHF inspection at defined intervals.
Condition 2 - Any Crack Found
NOTE: Both Options affect the inspection requirements contained in Service Bulletin MD80-55A065,
and will affect compliance with Federal Aviation Administration Airworthiness Directive AD
2007-10-04 as it relates to the upper rear spar cap. Operators are urged to consider both this
service bulletin and Service Bulletin MD80-55A065 while choosing an option.
Option 1
1) Does a splice repair of the horizontal stabilizer upper rear spar cap.
2) Repeats ETHF inspection at defined intervals until replacement of upper rear spar cap.
Option 2
1) Replaces the horizontal stabilizer upper rear spar cap.
2) Repeats ETHF inspection at defined intervals.
Group 1, Configuration 2, 4:
Condition 1 - No Crack Found
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
16 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 17

Repeats ETHF inspections at defined intervals.
Condition 2 - Any Crack Found
NOTE: Both Options affect the inspection requirements contained in Service Bulletin MD80-55A065,
and will affect compliance with FAA AD 2007-10-04 as it relates to the upper rear spar cap.
Operators are urged to consider both this service bulletin and Service Bulletin MD80-55A065
while choosing an option.
Option 1
1) Does a splice repair of the horizontal stabilizer upper rear spar cap.
2) Installs new Forcemate bushing
3) Repeats ETHF inspection at defined intervals until replacement of upper rear spar cap.
Option 2
1) Replaces the horizontal stabilizer upper rear spar cap.
2) Installs new Forcemate bushing
3) Repeats ETHF inspection at defined intervals.
No more work is necessary on the airplane(s) changed or inspected in accordance with the original
issue of this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
33, 34DC-9-81 (MD-81), DC-9-82
(MD-82), DC-9-83 (MD-83), DC-
9-87 (MD-87), MD-88
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION
numbers for that CONDITION number or OPTION number.
Accomplish the required action(s), based on the applicable condition(s), in Tables 1 or 2, in accordance
with Paragraph 3. Accomplishment Instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
17 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 18

Group 1, Configuration 1-2:
Table 1: Airplanes Not Having Accomplished an Upper Rear Spar Cap Splice Repair or Upper Rear Spar
Cap Replacement Barrel Nut Hole Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later )
ActionCondition
-Within 2,768
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 22,000
total flight cy-
cles.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion of left and right upper
rear spar caps at the two
aft-most barrel nut holes
and do the work of the
applicable condition that
follows:
All Airplanes not having
accomplished an upper
rear spar cap splice repair
or upper rear spar cap re-
placed in accordance with
Service Bulletin MD80-
55A065 or other service
action
4,500 flight cycles.--Do Eddy Current, High
Frequency (ETHF) inspec-
tion of left and right upper
rear spar caps at the two
aft-most barrel nut holes
Condition 1 (No Crack
Found) (a) (b)
(a) (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
18 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 19

Group 1, Configuration 1-2:
Table 1: Airplanes Not Having Accomplished an Upper Rear Spar Cap Splice Repair or Upper Rear Spar
Cap Replacement Barrel Nut Hole Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later )
ActionCondition
--Before further
flight.
Option 1
Splice repair the affected
upper aft spar cap.
Condition 2 (Any Crack
Found)
---AND
4,500 flight cycles.-Before 22,000
flight cycles af-
ter repair.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion of the splice repaired
upper rear spar cap at the
two aft-most barrel nut
holes
(a) (b)
(a) (b)
---AND
--Before 97,000
flight cycles af-
ter repair.
Replace the spliced re-
paired horizontal stabiliz-
er upper rear spar cap.
---AND
4,500 flight cycles.-Before 22,000
flight cycles af-
ter replacement.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion of the replaced upper
rear spar cap at the two
aft-most barrel nut holes
(a) (b)
(a) (b)
OR
--Before further
flight.
Option 2
Replace the horizontal
stabilizer upper rear spar
cap.
---AND
4,500 flight cycles.-Before 22,000
flight cycles af-
ter replacement.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion of the replaced upper
rear spar cap at the two
aft-most barrel nut holes
(a) (b)
(a) (b)
(a) If any crack is found, do Option 1 or Option 2 before further flight.
(b) If no crack is found, repeat inspect upper aft spar caps at noted interval.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
19 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 20

Group 1, Configuration 3-4:
Table 2: Airplanes Having Accomplished an Upper Rear Spar Cap Splice Repair or Upper Rear Spar
Cap Replacement Barrel Nut Hole Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later )
ActionCondition
--Before 22,000
total flight cycles
after repair or
replacement.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion of original upper rear
spar cap at the two aft-
most barrel nut holes and
do the work of the applica-
ble condition that follows:
All Airplanes having accom-
plished an upper rear spar
cap splice repair or upper
rear spar cap replaced in
accordance with Service
Bulletin MD80-55A065 or
other service action
4,500 flight cycles.--Do Eddy Current, High
Frequency (ETHF) inspec-
tion of left and right upper
rear spar cap at the two
aft-most barrel nut holes
Condition 1 (No Crack
Found) (a) (b)
(a) (b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
20 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 21

Group 1, Configuration 3-4:
Table 2: Airplanes Having Accomplished an Upper Rear Spar Cap Splice Repair or Upper Rear Spar
Cap Replacement Barrel Nut Hole Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later )
ActionCondition
--Before further
flight.
Option 1
Splice repair the affected
upper aft spar cap.
Condition 2 (Any Crack
Found)
---AND
4,500 flight cycles.-Before 22,000
flight cycles af-
ter splice repair.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion splice repaired upper
rear spar cap at the two
aft-most barrel nut holes
(a) (b)
(a) (b)
---AND
--Before 97,000
flight cycles af-
ter repair.
Replace the splice re-
paired horizontal stabiliz-
er upper rear spar cap.
---AND
4,500 flight cycles.-Before 22,000
flight cycles af-
ter replacement.
Do Eddy Current, High
Frequency (ETHF) inspec-
tion of the replaced upper
rear spar cap at the two
aft-most barrel nut holes
(a) (b)
(a) (b)
OR
--Before further
flight.
Option 2
Replace the affected hor-
izontal stabilizer upper
rear spar cap.
---AND
4,500 flight cycles.-Before 22,000
flight cycles af-
ter replacement.
Do ETHF inspection of
the replaced upper rear
spar cap at the two aft-
most barrel nut holes
(a) (b)
(a) (b)
(a) If any crack is found, do Option 1 or Option 2 before further flight.
(b) If no crack is found, repeat inspect upper aft spar caps at noted interval.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
21 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 22

F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection (and repair, if
required) for each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust
the estimate with operator task hour data if necessary. The estimate does not include lost time. These
are some examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Inspect Upper Rear Spar Aft Spar Cap Barrel Nut Holes
Elapsed HoursTask HoursNumber of PersonsTask
1.51.51Open Access (FIG-
URE 1)
1.51.51FIGURE 2
FIGURE 3
1.51.51Close Access
4.54.5TOTAL FOR EACH SPAR CAP
Group 1, Configuration 1, 3:
Option 1 - Upper Spar Cap Splice Repair
Elapsed HoursTask HoursNumber of PersonsTask
8.048.06Remove - Horizon-
tal Stabilizer
8.016.02Remove - Elevators
6.012.02Remove - Leading
Edge
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
22 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 23

Group 1, Configuration 1, 3:
Option 1 - Upper Spar Cap Splice Repair
Elapsed HoursTask HoursNumber of PersonsTask
72.0216.03Install Horizontal
Stabilizer Rear Spar
Upper Cap Splice
6.012.02Install - Leading
Edge
8.016.02Install - Elevators
8.048.06Install - Horizontal
Stabilizer
116.0368.0TOTAL FOR EACH SPAR CAP
Group 1, Configuration 2, 4:
Option 1 - Upper Spar Cap Splice Repair
Elapsed HoursTask HoursNumber of PersonsTask
8.048.06Remove - Horizon-
tal Stabilizer
8.016.02Remove - Elevators
6.012.02Remove - Leading
Edge
72.0216.03Install Horizontal
Stabilizer Rear Spar
Upper Cap Splice
13.026.02Install Bushing/Cold
Work Hole
6.012.02Install - Leading
Edge
8.016.02Install - Elevators
8.048.06Install - Horizontal
Stabilizer
129.0394.0TOTAL FOR EACH SPAR CAP
Group 1, Configuration 1, 3:
Option 2 - Upper Spar Cap Replacement
Elapsed HoursTask HoursNumber of PersonsTask
8.048.06Remove - Horizon-
tal Stabilizer
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
23 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 24

Group 1, Configuration 1, 3:
Option 2 - Upper Spar Cap Replacement
Elapsed HoursTask HoursNumber of PersonsTask
8.016.02Remove - Elevators
6.012.02Remove - Leading
Edge
72.0216.03Replace Horizontal
Stabilizer Rear Spar
Upper Cap
6.012.02Install - Leading
Edge
8.016.02Install - Elevators
8.048.06Install - Horizontal
Stabilizer
116.0368.0TOTAL FOR EACH SPAR CAP
Group 1, Configuration 2, 4:
Option 2 - Upper Spar Cap Replacement
Elapsed HoursTask HoursNumber of PersonsTask
8.048.06Remove - Horizon-
tal Stabilizer
8.016.02Remove - Elevators
6.012.02Remove - Leading
Edge
72.0216.03Replace Horizontal
Stabilizer Rear Spar
Upper Cap
13.026.02Install Bushing/Cold
Work Hole
6.012.02Install - Leading
Edge
8.016.02Install - Elevators
8.048.06Install - Horizontal
Stabilizer
129394.0TOTAL FOR EACH SPAR CAP
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
24 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 25

H. Weight and Balance Changes
Condition 2, Option 1 Only
Moment
Change (MEW)
IN.-LBS
Mfr's Empty
Weight (MEW)
LBS
Approximate
Station (Inch-
es)
AirplaneConfiguration
+5312.3+3.21660.1DC-9-81 (MD-81)
DC-9-82 (MD-82)
DC-9-83 (MD-83)
MD-88
SR09550027-7001
or
SR09550027-7003
or
SR09550027-7013
or
SR09550027-7015
+4643.5+3.21451.1DC-9-87 (MD-87)SR09550027-7001
or
SR09550027-7003
or
SR09550027-7013
or
SR09550027-7015
Condition 2, Option 2 Only
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Boeing Service Bulletin MD80-55A065.
b. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2007-10-04.
c. Non-Destructive Test Standard Practices Manual (NDTSPM) 06-00-02, 06-10-01.001.
d. MD-80 Aircraft Maintenance Manual (AMM) 20-20-01, 27-30-02, 55-10-00, 55-10-01.
e. MD-80 Fleet Team Digest (FTD) 55-12002
f. MD-80 Structural Repair Manual (SRM) 51, 51-10-02, 51-10-03, 51-10-04, 51-20-00, 51-30-01,
51-30-02, 51-30-03, 51-30-05, 51-30-09, 51-30-11, 51-70-02.
2. Data Supplied with this Service Bulletin:
No data is supplied with this service bulletin. To obtain the data necessary to support this service
bulletin submit a data request to:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
25 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 26

Data and Services Management
MS D800-0019
3855 Lakewood Boulevard
Long Beach, California 90846
Phone: (562) 593-6996
Fax: (562) 593-2001
E-mail: dse.boecom@boeing.com
a. Drawings:
ADCNDCN/REVSheetTitleDrawing No
-EDWGRear Spar Repair - Inboard UpperSR09550027
-CDWGRear Spar Replacement HorizontalSR09550030
-BDWGFatigue Life Enhancement - Upper RearSR09550032
3. Installation Drawings Used in the Preparation of this Service Bulletin:
ChangeTitleDrawing Number
DDStructural Assembly - Horizontal Stabilizer Outer Panel, Front
Spar to Rear Spar
5922575
BJStabilizer Assembly - Complete Horizontal5930603
DCSpar Assembly - Horizontal Stabilizer, Rear9918401
4. Process Data:
Douglas Process Specifications referred to on the drawings are not given in this service bulletin
since these procedures are frequently used as standard shop practices.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS. DTI requirements for the structure affected
are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
26 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 27

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits/parts shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Original Issue
of this Service
Bulletin (US Dol-
lars)
ROLT as of the
Original Issue of
this Service Bul-
letin (Calendar
Days)
QTYDateNameKit Number
$3,014.00901June 15, 2013SERVICE KITSA09550070-3
$32,440.00901June 15, 2013FULL SPAR SPLICE
KIT - UPPER LEFT
SA09550065-3
$29,304.00901June 15, 2013FULL SPAR SPLICE
KIT - UPPER RIGHT
SA09550065-5
$60,222.00901June 15, 2013FULL SPAR CAP RE-
PLACEMENT KIT -
UPPER LEFT
SA09550065-53
$60,074.00901June 15, 2013FULL SPAR CAP RE-
PLACEMENT KIT -
UPPER RIGHT
SA09550065-55
$1,269.00901June 15, 2013FORCEMATE BUSH-
ING KIT- NOMINAL
SA09550065-61
B. Industry Support Information
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this
service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
27 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 28

NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary based on inspection results and operators choice of the
required change.
Parts Kits RequiredConfiguration and Option
SA09550070-3All Configurations, All Conditions
SA09550065-3 (Left Side)Configurations 1 and 3, Condition 2, Option 1
SA09550065-5 (Right Side)
SA09550065-3 and SA09550065-61 (Left Side)Configurations 2 and 4, Condition 2, Option 1
SA09550065-5 and SA09550065-61 (Right Side)
SA09550065-53 (Left Side)Configurations 1 and 3, Condition 2, Option 2
SA09550065-55 (Right Side)
SA09550065-53 and SA09550065-61 (Left Side)Configurations 2 and 4, Condition 2, Option 2
SA09550065-55 and SA09550065-61 (Right Side)
Group 1, Configuration 1, 3:
Condition 2, Option 1:
Kit SA09550065
NotesNameQTYNew Part Number
-5-3
(a)SPAR SPLICE KIT-LH-1SA09550065-7
(b)SPAR SPLICE KIT-RH1-SA09550065-9
(c)SPAR CAP (STUB)-1SR09550027-13
(d)SPAR CAP (STUB)1-SR09550027-14
(a) SA09550065-7 is a sub kit of SA09550065-3.
(b) SA09550065-9 is a sub kit of SA09550065-5.
(c) May be made from 5918000-526.
(d) May be made from 5918000-525.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
28 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 29

Group 1, Configuration 2, 4:
Condition 2, Option 1:
Kit SA09550065
NotesNameQTYNew Part Number
-61-5-3
-BUSHING2--7090-040
-BUSHING2--7090-043
-HILOK1--HLT434-8-13
-PIN1--HLT634-8-13
-NUT1--MS21042L4
-WASHER1--NAS1252-416L
-WASHER2--NAS620-416L
-BOLT2--NAS6204-13
-NUT2--NAS679A4
(a)SPAR SPLICE KIT-LH--1SA09550065-7
(b)SPAR SPLICE KIT-RH-1-SA09550065-9
(c)SPAR CAP (STUB)--1SR09550027-13
(d)SPAR CAP (STUB)-1-SR09550027-14
(a) SA09550065-7 is a sub kit of SA09550065-3.
(b) SA09550065-9 is a sub kit of SA09550065-5.
(c) May be made from 5918000-526.
(d) May be made from 5918000-525.
Group 1, Configuration 1, 3:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-55-53
--NUT33113LH7940T064
--NUT44113LH7940T070
--BARREL NUT11113LH7940T080
--NUT BARREL22117LH7940T-098
--NUT ASSY99993D0006-3
--NUT ASSY553D0006-4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
29 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 30

Group 1, Configuration 1, 3:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-55-53
(a)-BARREL NUTSUBSUB3D0011-9
-RETAINERSUBSUB3D0012-9
--BOLT223D0031-9-34
-5918000-525SPAR CAP1-5918000-525
5918000-529
-5918000-526SPAR CAP-15918000-526
5918000-530
--WASHER2273232-9-28.7
--PIN55HLT434-6-3
--PIN7272HLT434-6-4
--PIN3232HLT434-6-5
--PIN1818HLT434-6-6
--PIN1818HLT434-6-7
--PIN2525HLT434-6-8
--PIN22HLT434-6-9
--PIN55HLT434-6-11
--HILOK11HLT434-8-8
--HILOK33HLT434-8-13
--HILOK22HLT434-8-16
--PIN8484HLT435-6-4
--PIN7777HLT435-6-5
--PIN99HLT435-6-6
--PIN1313HLT435-6-7
--PIN44HLT435-6-8
--WASHER22MS20002-5
--WASHER11MS20002-6
--WASHER11MS20002-7
--WASHER22MS20002C5
--WASHER33MS20002C6
--WASHER44MS20002C7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
30 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 31

Group 1, Configuration 1, 3:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-55-53
--WASHER11MS20002C8
--RIVET66MS20426AD3-4D
--RIVET11MS20426AD5-8D
--RIVET4545MS20426AD5-9D
--RIVET9595MS20426AD6-8D
--RIVET5757MS20426AD6-9D
--RIVET44MS20426AD6-10D
--RIVET2020MS20470AD5-8D
--RIVET106106MS20470E5-6D
--RIVET2020MS20470E5-7D
--RIVET5252MS20470E6-7D
--RIVET2626MS20470E6-8D
--NUT291291MS21042L3
--NUTPLATE55MS21075L3
--BOLT22MS21250-05018
--BOLT11MS21250-06020
--BOLT11MS21250-06022
--BOLT11MS21250-06024
--BOLT11MS21250-07020
--BOLT11MS21250-07024
--BOLT11MS21250-07026
--BOLT11MS21250-08028
--BOLT.1MS21250H07060
--RIVET88NAS1097KE5-8D
--RIVET77NAS1097KE5-9D
--RIVET4444NAS1097KE6-8D
--RIVET5959NAS1097KE6-9D
--RIVET44NAS1097KE6-11D
--WASHER7878NAS1149F0332P
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
31 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 32

Group 1, Configuration 1, 3:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-55-53
--WASHER2424NAS1149F0463P
--WASHER1414NAS1149FN816P
--WASHER316316NAS1252-10L
--SCREW1414NAS1403-2
--SCREW2020NAS1403-4
--SCREW3030NAS1403-5
--SCREW44NAS1403-8
--WASHER2323NAS1587A3C
--SCREW11NAS333CPA4-5
--RETAINER33NAS578-6B
--RETAINER44NAS578-7B
--RETAINER11NAS578-8B
--SCREW2424NAS602-7P
--WASHER66NAS620-416L
--BOLT66NAS6203-10
--BOLT88NAS6203-6
--BOLT66NAS6204-13
--BOLT2424NAS6204-4
--NUT3131NAS679A3
--NUT77NAS679A4
--BOLT11PIC239-3-4
--BOLT22PIC239-4-4
--PIN44S4931919-6-5
--PIN88S4931920-6-4
--PIN1010S4931920-6-5
--PIN1414S4931920-6-6
--PIN44S4931920-6-7
--PIN66S4931920-6-8
(a) May be substituted for 117LH7940T-098 barrel nut assembly.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
32 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 33

Group 1, Configuration 2, 4:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-61-55-53
--NUT-33113LH7940T064
--NUT-44113LH7940T070
--BARREL NUT-11113LH7940T080
--NUT BARREL-22117LH7940T-098
--NUT ASSY-99993D0006-3
--NUT ASSY-553D0006-4
(a)-BARREL NUT-SUBSUB3D0011-9
-RETAINER-SUBSUB3D0012-9
--BOLT-223D0031-9-34
-5918000-525SPAR CAP-1-5918000-525
5918000-529
-5918000-526SPAR CAP--15918000-526
5918000-530
--WASHER-2273232-9-28.7
--BUSHING2--7090-040
--BUSHING2--7090-043
--PIN-55HLT434-6-3
--PIN-7272HLT434-6-4
--PIN-3232HLT434-6-5
--PIN-1818HLT434-6-6
--PIN-1818HLT434-6-7
--PIN-2525HLT434-6-8
--PIN-22HLT434-6-9
--PIN-55HLT434-6-11
--HILOK-11HLT434-8-8
--HILOK133HLT434-8-13
--HILOK-22HLT434-8-16
--PIN-8484HLT435-6-4
--PIN-7777HLT435-6-5
--PIN-99HLT435-6-6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
33 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 34

Group 1, Configuration 2, 4:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-61-55-53
--PIN-1313HLT435-6-7
--PIN-44HLT435-6-8
--PIN1--HLT634-8-13
--WASHER-22MS20002-5
--WASHER-11MS20002-6
--WASHER-11MS20002-7
--WASHER-22MS20002C5
--WASHER-33MS20002C6
--WASHER-44MS20002C7
--WASHER-11MS20002C8
--RIVET-66MS20426AD3-4D
--RIVET-11MS20426AD5-8D
--RIVET-4545MS20426AD5-9D
--RIVET-9595MS20426AD6-8D
--RIVET-5757MS20426AD6-9D
--RIVET-44MS20426AD6-10D
--RIVET-2020MS20470AD5-8D
--RIVET-106106MS20470E5-6D
--RIVET-2020MS20470E5-7D
--RIVET-5252MS20470E6-7D
--RIVET-2626MS20470E6-8D
--NUT-291291MS21042L3
--NUT1--MS21042L4
--NUTPLATE-55MS21075L3
--BOLT-22MS21250-05018
--BOLT-11MS21250-06020
--BOLT-11MS21250-06022
--BOLT-11MS21250-06024
--BOLT-11MS21250-07020
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
34 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 35

Group 1, Configuration 2, 4:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-61-55-53
--BOLT-11MS21250-07024
--BOLT-11MS21250-07026
--BOLT-11MS21250-08028
--BOLT-.1MS21250H07060
--RIVET-88NAS1097KE5-8D
--RIVET-77NAS1097KE5-9D
--RIVET-4444NAS1097KE6-8D
--RIVET-5959NAS1097KE6-9D
--RIVET-44NAS1097KE6-11D
--WASHER-7878NAS1149F0332P
--WASHER-2424NAS1149F0463P
--WASHER-1414NAS1149FN816P
--WASHER-316316NAS1252-10L
--WASHER1--NAS1252-416L
--SCREW-1414NAS1403-2
--SCREW-2020NAS1403-4
--SCREW-3030NAS1403-5
--SCREW-44NAS1403-8
--WASHER-2323NAS1587A3C
--SCREW-11NAS333CPA4-5
--RETAINER-33NAS578-6B
--RETAINER-44NAS578-7B
--RETAINER-11NAS578-8B
--SCREW-2424NAS602-7P
--WASHER266NAS620-416L
--BOLT-66NAS6203-10
--BOLT-88NAS6203-6
--BOLT266NAS6204-13
--BOLT-2424NAS6204-4
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
35 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 36

Group 1, Configuration 2, 4:
Condition 2, Option 2:
Kit SA09550065
NotesExisting Part
Number
NameQTYNew Part Number
-61-55-53
--NUT-3131NAS679A3
--NUT277NAS679A4
--BOLT-11PIC239-3-4
--BOLT-22PIC239-4-4
--PIN-44S4931919-6-5
--PIN-88S4931920-6-4
--PIN-1010S4931920-6-5
--PIN-1414S4931920-6-6
--PIN-44S4931920-6-7
--PIN-66S4931920-6-8
(a) May be substituted for 117LH7940T-098 barrel nut assembly.
Kit SA09550070
NotesNameQTYNew Part Number
-3
-FILLER25930603-17
2. Parts and Materials Supplied by the Operator
CAGESupplierQTYPart Number/Specification
92108PRC-DeSoto International,
Incorporated
As Re-
quired
PR-1422 B-2 Sealant
(DMS 2082
P.O. Box 1800or Equivalent)
Sylmar, California 91342
3. Parts Modified and Reidentified
None
4. Parts Removed and Not Replaced
None
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
36 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 37

D. Parts Necessary to Change Spares
To get the kits shown below, refer to Paragraph 2.A., Material - Price and Availability.
E. Special Tooling - Price and Availability
The operator can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this
Service Bulletin. Tool price and supply data are not given.
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be
necessary. Examine operator tool supply to make sure all necessary tools are available.
NotesCAGESupplierNameTool Number
(a)81205The Boeing CompanyHorizontal Stabiliz-
er Hinge Alignment
Tool
C652-5922575 ATP3
81205The Boeing CompanyStress Coin Coun-
tersink Die Tool
C652-74956-165B-GT
(a) Horizontal Stabilizer Hinge Alignment Tool is optional, not mandatory, and may be obtained
from Boeing.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
37 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 38

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
38 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT
BLANK PAGE

### Page 39

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
WARNING: IF ELECTRICAL POWER IS APPLIED TO THE AIRPLANE, MAKE SURE YOU OBEY
ALL PRECAUTIONS WHILE YOU DO WORK. IF YOU DO NOT OBEY THE
PRECAUTIONS, DEATH OR INJURY TO PERSONS, AND DAMAGE TO THE AIRPLANE
CAN OCCUR.
CAUTION: ELECTRICALLY GROUND THE AIRPLANE. THIS WILL HELP TO PREVENT DAMAGE
TO THE AIRPLANE OR EQUIPMENT.
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Equivalent parts are listed in the AEPL, Drawing 7595071.
3. Use the approved fastener and process material substitutions, in accordance with
MD-80 SRM 51.
4. If the length of any fastener specified in this service bulletin does not meet installation
standards given in Structural Repair Manual (SRM) Chapter 51, then a fastener of
the same specification, or an approved substitute, with a length which meets the
installation standards given in SRM Chapter 51 may be used. In addition, washers
may be installed for fastener grip length in accordance with SRM Chapter 51.
5. A 1/8-inch thick stack of the same type washers called for in this service bulletin is
the maximum thickness which may be used under fastener head or nut to counteract
accumulation of tolerances.
EXCEPTION: When the available fastener length increments are greater than
1/16-inch, a 3/16-inch thick stack of the same type washers may be used.
6. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch.
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are in MD-80 SRM 51.
– Torque limits to tighten nuts and bolts are in MD-80 SRM 51.
7. Refer to these chapters for the applicable operations as accepted procedures:
– MD-80 SRM 51-10-02 - Forming, Heat Treatment, and Metal Handling
– MD-80 SRM 51-10-03 - Corrosion and Dissimilar Metals Protection
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
39 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 40

– MD-80 SRM 51-10-04 - Drilling and Countersinking
– MD-80 SRM 51-20-00 - Repair Sealing
– MD-80 SRM 51-30-01 - Installing Bolts, Screws, and Washers
– MD-80 SRM 51-30-02 - Removing and Installing Rivets
– MD-80 SRM 51-30-03 - Removing and Installing Lockbolts
– MD-80 SRM 51-30-05 - Installing Hi-Lok Attachments
– MD-80 SRM 51-30-09 - Split Sleeve Cold Work
– MD-80 SRM 51-30-11 - Conical Spacers (Countersink Washers)
– MD-80 SRM 51-70-02 - Repair of Bonded Aluminum Assemblies
– MD-80 AMM 20-20-01 - Cementing - Maintenance Practices
8. Obey all of the warnings and cautions given in the specified manual sections.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
10. Some Boeing parts are supplied in a temporary configuration. Those parts are
identified with a 'U' or 'Y' in place of the '-' (dash) in the part number. It is permitted
to install parts identified with a 'U' or 'Y' as an alternative to the '-' (dash) number
part. Boeing Drawing SE10000000, Sheets 5.0 and 6.0 contain more data.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
13. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
14. Shaded areas in Figures are reference only. Shaded areas in Figures may look
different than your airplane.
15. When more than one OPTION is given for a CONDITION, do only one of the OPTION
numbers. When more than one ACTION is given for a CONDITION number or an
OPTION number, do all of the ACTION numbers for that CONDITION number or
OPTION number.
16. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
B. WORK INSTRUCTIONS
Group 1, Configuration 1, 3:
1. Remove the left and right horizontal stabilizer skin filler. Refer to Figure 1 for location of skin fillers.
NOTE: The skin fillers are bonded to the airplane structure with DMS 2082 adhesive.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
40 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 41

2. Prepare the surface area to be inspected in accordance with Figure 2.
3. Do a High Frequency Eddy Current (ETHF) inspection of the areas around the upper rear spar
cap two aft-most barrel nut holes in accordance with Figure 3 and based on inspection results do
the work of the applicable condition that follows:
Condition 1 - No Crack Found
a. If required, fill area of forward barrel nut hole sealant removed for ETHF inspection in
accordance with Figure 2 with DMS 2082 sealant.
b. Install a new or serviceable 5930603-17 filler using DMS 2082 sealant. Refer to MD-80 AMM
20-20-01 as an acceptable procedure.
c. Put the airplane back in serviceable condition.
d. Repeat ETHF inspection at intervals specified in Paragraph 1.E., Compliance.
Condition 2 - Any Crack Found
a. Do Option 1 or Option 2
NOTE: Both Options affect the inspection requirements contained in Service Bulletin
MD80-55A065, and will affect compliance with FAA AD 2007-10-04 as it relates to
the upper rear spar cap. Operators are urged to consider both this service bulletin
and Service Bulletin MD80-55A065 while choosing an option.
Option 1:
(1) Remove and keep horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(2) Remove and keep elevator from affected side. Refer to MD-80 AMM 27-30-02 as an
acceptable procedure.
(3) Remove and keep horizontal stabilizer leading edge from affected side. Refer to MD-80
AMM 55-10-01 as an acceptable procedure.
(4) Splice horizontal stabilizer upper rear spar in accordance with Service Rework Drawing
SR09550027-7001 (left side) or -7003 (right side).
(5) Install kept horizontal stabilizer leading edge on affected side. Refer to MD-80 AMM
55-10-01 as an acceptable procedure.
(6) Install kept elevator on affected side. Refer to MD-80 AMM 27-30-02 as an acceptable
procedure.
(7) Install a new or serviceable 5930603-17 filler using DMS 2082 sealant. Refer to MD-80
AMM 20-20-01 as an acceptable procedure.
(8) Install kept horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
41 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 42

(9) Put the airplane back in serviceable condition.
(10) Repeat ETHF inspection at intervals specified in Paragraph 1.E., Compliance.
(11) Replace horizontal stabilizer upper rear spar cap in accordance with Service Rework
Drawing SR09550030-7001 (left side) or -7005 (right side) as specified in Paragraph 1.E.,
Compliance.
Option 2:
(1) Remove and keep horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(2) Remove and keep elevator from affected side. Refer to MD-80 AMM 27-30-02 as an
acceptable procedure.
(3) Remove and keep horizontal stabilizer leading edge from affected side. Refer to MD-80
AMM 55-10-01 as an acceptable procedure.
(4) Install new horizontal stabilizer upper rear spar cap in accordance with Service Rework
Drawing SR09550030-7001 (left side) or -7005 (right side).
(5) Install kept horizontal stabilizer leading edge on affected side. Refer to MD-80 AMM
55-10-01 as an acceptable procedure.
(6) Install kept elevator on affected side. Refer to MD-80 AMM 27-30-02 as an acceptable
procedure.
(7) Install a new or serviceable 5930603-17 filler using DMS 2082 sealant. Refer to MD-80
AMM 20-20-01 as an acceptable procedure.
(8) Install kept horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(9) Put the airplane back in serviceable condition.
(10) Repeat ETHF inspection at intervals specified in Paragraph 1.E., Compliance.
Group 1, Configuration 2, 4:
1. Remove the left and right horizontal stabilizer skin filler. Refer to Figure 1 for location of skin fillers.
NOTE: The skin fillers are bonded to the airplane structure with DMS 2082 adhesive.
2. Prepare the surface area to be inspected in accordance with Figure 2.
3. Do a High Frequency Eddy Current (ETHF) inspection of the areas around the upper rear spar
cap two aft-most barrel nut holes in accordance with Figure 3 and based on inspection results do
the work of the applicable condition that follows:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
42 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 43

Condition 1 - No Crack Found
a. If required, fill area of forward barrel nut hole sealant removed for ETHF inspection in
accordance with Figure 2 with DMS 2082 sealant.
b. Install a new or serviceable 5930603-17 filler using DMS 2082 sealant. Refer to MD-80 AMM
20-20-01 as an acceptable procedure.
c. Put the airplane back in serviceable condition
d. Repeat ETHF inspection at intervals specified in Paragraph 1.E., Compliance.
Condition 2 - Any Crack Found
a. Do Option 1 or Option 2
NOTE: Both Options affect the inspection requirements contained in Service Bulletin
MD80-55A065, and will affect compliance with FAA AD 2007-10-04 as it relates to
the upper rear spar cap. Operators are urged to consider both this service bulletin
and Service Bulletin MD80-55A065 while choosing an option.
Option 1:
(1) Remove and keep horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(2) Remove and keep elevator from affected side. Refer to MD-80 AMM 27-30-02 as an
acceptable procedure.
(3) Remove and keep horizontal stabilizer leading edge from affected side. Refer to MD-80
AMM 55-10-01 as an acceptable procedure..
(4) Splice horizontal stabilizer upper rear spar cap in accordance with Service Rework Drawing
SR09550027-7013 (left side) or -7015 (right side).
(5) Install kept horizontal stabilizer leading edge on affected side. Refer to MD-80 AMM
55-10-01 as an acceptable procedure.
(6) Install kept elevator on affected side. Refer to MD-80 AMM 27-30-02 as an acceptable
procedure.
(7) Install a new or serviceable 5930603-17 filler using DMS 2082 sealant. Refer to MD-80
AMM 20-20-01 as an acceptable procedure.
(8) Install kept horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(9) Put the airplane back in serviceable condition.
(10) Repeat ETHF inspection at intervals specified in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
43 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 44

(11) Replace horizontal stabilizer upper rear spar cap in accordance with Service Rework
Drawing SR09550030-7017 (left side) or -7019 (right side) as specified in Paragraph 1.E.,
Compliance.
Option 2:
(1) Remove and keep horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(2) Remove and keep elevator from affected side. Refer to MD-80 AMM 27-30-02 as an
acceptable procedure.
(3) Remove and keep horizontal stabilizer leading edge from affected side. Refer to MD-80
AMM 55-10-01 as an acceptable procedure.
(4) Install new horizontal stabilizer upper rear spar cap in accordance with Service Rework
Drawing SR09550030-7017 (left side) or -7019 (right side).
(5) Install kept horizontal stabilizer leading edge on affected side. Refer to MD-80 AMM
55-10-01 as an acceptable procedure.
(6) Install kept elevator on affected side. Refer to MD-80 AMM 27-30-02 as an acceptable
procedure.
(7) Install a new or serviceable 5930603-17 filler using DMS 2082 sealant. Refer to MD-80
AMM 20-20-01 as an acceptable procedure.
(8) Install kept horizontal stabilizer. Refer to MD-80 AMM 55-10-00 as an acceptable
procedure.
(9) Put the airplane back in serviceable condition.
(10) Repeat ETHF inspection at intervals specified in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1: December 17, 2013
44 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 45 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
REAR
SPAR
PLANE
Xh=26.625
INBD
UPPER PANEL  2203861
LEFT SIDE
LOOKING DOWN
FIGURE 1: REMOVE SKIN FILLER
(SHEET 1 OF 3)
Original Issue: May 22, 2013
Revision 1 December 17, 2013  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  MD80-55A070
Work - See page 1 for details.  45 01 53

### Page 46 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
REAR
SPAR
PLANE
Xh=26.625
INBD  UPPER PANEL  2203879
RIGHT SIDE
LOOKING DOWN
FIGURE 1: REMOVE SKIN FILLER
(SHEET 2 OF 3)
Original Issue: May 22, 2013
Revision 1 December 17, 2013  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  MD80-55A070
Work - See page 1 for details.  46 of 53

### Page 47

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)25930603-17Horizontal Stabiliz-
er Upper Skin Filler
Remove1
(a) Filler is attached with DMS 2082 sealant.
FIGURE 1: REMOVE SKIN FILLER
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1 December 17, 2013
47 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 48 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
REAR
SPAR
PLANE
Xh=26.625
A-A
INBD
UPPER PANEL  LEFT SIDE  2204099
LOOKING DOWN
FIGURE 2: INSPECTION SURFACE AREA - PREPARATION
(SHEET 1 OF 3)
Original Issue: May 22, 2013
Revision 1 December 17, 2013  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  MD80-55A070
Work - See page 1 for details.  48 0f 53

### Page 49 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
B
I OR
REAR
SPAR
PLANE
Xh=26.625
B-B
INBD
OPPER PANEL
RIGHT SIDE
LOOKING DOWN  2204100
FIGURE 2: INSPECTION SURFACE AREA - PREPARATION
(SHEET 2 OF 3)
Original Issue: May 22, 2013
Revision 1 December 17, 2013  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  MD80-55A070
Work - See page 1 for details.  49 of 53

### Page 50

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for each airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)15918000-525
5918000-526
Horizontal Stabiliz-
er Upper Spar Cap
Prepare1
(a) Make sure that the horizontal stabilizer skin does not interfere with the test probe in the areas that require
inspection. The distance between the edge of the forward barrel nut hole and the skin at the closest point
must be greater than the diameter of the probe coil plus 0.010 inch.
(b) If the horizontal stabilizer skin interferes with the test probe, remove enough sealant from the forward
face of the forward barrel nut hole to allow for the diameter of the probe plus 0.010 inch minimum in the
inspection area.
FIGURE 2: INSPECTION SURFACE AREA - PREPARATION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1 December 17, 2013
50 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

### Page 51 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
45 DEG +5  45 DEG +5
TYPICAL 4  TYPICAL 4
LOCATIONS  LOCATIONS
REAR
SPAR
PLANE
Xh=26.625
INBD
UPPER PANEL  2204007
LEFT SIDE
LOOKING DOWN
FIGURE 3: HIGH FREQUENCY EDDY CURRENT INSPECTION
(SHEET 1 OF 3)
Original Issue: May 22, 2013
Revision 1 December 17, 2013  Export Controlled ECCN: 9E991 - BOEING  MD80-55A070
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  51 of 53

### Page 52 (OCR)

BOEING SERVICE BULLETIN MD80-55A070
ALERT  ALERT
45 DEG +5  45 DEG +5
TYPICAL 4  TYPICAL 4
LOCATIONS  LOCATIONS
REAR
SPAR
PLANE
Xh=26.625
INBD
UPPER PANEL  2204102
RIGHT SIDE
LOOKING DOWN
FIGURE 3: HIGH FREQUENCY EDDY CURRENT INSPECTION
(SHEET 2 OF 3)
Original Issue: May 22, 2013
Revision 1 December 17, 2013  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  MD80-55A070
Work - See page 1 for details.  52 of 53

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b) (c)15918000-525
5918000-526
Horizontal Stabiliz-
er Upper Spar Cap
Inspect High Fre-
quency Eddy Cur-
rent (ETHF)
1
Make sure the surfaces to be inspected are clean. Refer to NDTSPM 06-00-02 as an acceptable
procedure.
(a)
Perform a High Frequency Eddy Current surface inspection of the horizontal stabilizer rear spar upper
cap adjacent to the two barrel nut holes at the inspection area. Scan around the barrel nut holes
looking for cracks propagating in the forward and aft direction initiating at the barrel nut holes following
the instructions found in the Nondestructive Testing Standard Practice Manual NDTSPM 06-10-
01.001 (ETHF - Procedure 1). Use Calibration Method "A" and Scan Method "79".
(b)
If the horizontal stabilizer skin interferes with the test probe, inspect by scanning the forward face of
the forward barrel nut holes following the instructions found in the Nondestructive Testing Standard
Practice Manual NDTSPM 06-10-01.001 (ETHF - Procedure 1). Use calibration Method "A" and Scan
Method "79".
(c)
FIGURE 3: HIGH FREQUENCY EDDY CURRENT INSPECTION
(SHEET 3 OF 3)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 22, 2013
MD80-55A070Revision 1 December 17, 2013
53 of 53
BOEING SERVICE BULLETIN MD80-55A070
ALERTALERT

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
