# Boeing Special Attention Service Bulletin 737-21-1165: U.S. DOT/FAA - SB-737-21-1165-03

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0487; AD 2015-16-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-21-1165](https://openairdocs.org/service-documents/boeing/sb-737-21-1165.md)
- Title as filed: U.S. DOT/FAA - SB-737-21-1165-03
- Pages: 126
- PDF: https://openairdocs.org/files/sha256/3a/ca/3acae132cd0556c41bc6002d986add3a6a11fe7123aa6c3aa4601f3561bd23c9
- Page: https://openairdocs.org/service-documents/boeing/sb-737-21-1165/file/3acae132cd05

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-21-1165
Original Issue: January 07, 2010
Revision 3: July 16, 2014
ATA System: 2133
SUBJECT: AIR CONDITIONING - Cabin Pressure Indication and Warning System - Redundant
Pressure Switch Installation
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2010 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
1 of 126
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
2 of 126
BOEING SERVICE BULLETIN 737-21-1165
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 2 4
B. Concurrent Requirements ...................................... 2 4
C. Reason ................................................ 2 4
D. Description .............................................. 2 5
E. Compliance .............................................. 2 7
F. Approval ............................................... 2 7
G. Manpower .............................................. 2 8
H. Weight and Balance Changes .................................... 3 0
I. Electrical Load Data ......................................... 3 0
J. References .............................................. 3 1
1. Existing Data: ......................................... 3 1
2. Data Supplied with this Service Bulletin: ........................... 3 1
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 1
K. Publications Affected ........................................ 3 2
L. Interchangeability and Intermixability of Parts ........................... 3 2
M. Software Accomplishment Summary ................................ 3 2
2. MATERIAL INFORMATION ........................................ 3 3
A. Material - Price and Availability ................................... 3 3
B. Industry Support Information .................................... 3 4
C. Parts Necessary for Each Airplane ................................. 3 4
1. Kits/Parts ............................................ 3 4
2. Parts and Materials Supplied by the Operator ........................ 4 0
3. Parts Modified and Reidentified ................................ 4 0
4. Parts Removed and Not Replaced .............................. 4 1
D. Parts Necessary to Change Spares ................................. 4 1
E. Special Tooling - Price and Availability ............................... 4 1
F. Special Tooling Necessary to do this Service Bulletin ....................... 4 1
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 4 3
A. GENERAL INFORMATION ..................................... 4 3
B. WORK INSTRUCTIONS ....................................... 4 4
FIGURE 1: FLIGHT COMPARTMENT - AURAL WARNING MODULE - REPLACEMENT ....... 6 0
FIGURE 2: FLIGHT COMPARTMENT - CABIN FLOOR - NUTPLATES INSTALLATION [Group 1-3, 5-6]
.................................................. 6 2
FIGURE 3: FORWARD ELECTRONICS COMPARTMENT CEILING - CABIN ALTITUDE WARNING -
SECOND 10K PRESSURE SWITCH INSTALLATION [Group 1-3, 5-6] ........... 6 6
FIGURE 4: J46 JUNCTION BOX - W0066 WIRE BUNDLE ROUTING [Group 1, 5] ........... 6 9
FIGURE 5: CHANGES TO THE W0066 WIRE BUNDLE [Group 1, 5] .................. 7 0
FIGURE 6: J46 JUNCTION BOX - W0066 WIRE BUNDLE ROUTING [Group 2, 6] ........... 7 2
FIGURE 7: CHANGES TO THE W0066 WIRE BUNDLE [Group 2, 6] .................. 7 3
FIGURE 8: W2508, W2510 AND W5156 WIRE BUNDLES ROUTING [Group 2, 6] ........... 7 5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
3 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 4

FIGURE 9: CHANGES TO THE W2508 WIRE BUNDLE [Group 6] ................... 8 3
FIGURE 10: CHANGES TO THE W2510 WIRE BUNDLE [Group 1-2, 5-6] ................ 8 5
FIGURE 11: W2508 AND W5156 WIRE BUNDLES ROUTING [Group 3] ................. 8 6
FIGURE 12: CHANGES TO THE W2508 WIRE BUNDLE [Group 3] ................... 9 0
FIGURE 13: W5503 AND W5514 WIRE BUNDLES ROUTING [Group 1-2, 5-6] ............. 9 2
FIGURE 14: CHANGES TO THE W5503 WIRE BUNDLE [Group 1-2, 5-6] ................ 9 9
FIGURE 15: CHANGES TO THE W5514 WIRE BUNDLE [Group 1-2, 5-6] ............... 1 0 1
FIGURE 16: W5503 AND W5514 WIRE BUNDLES ROUTING [Group 3] ................ 1 0 3
FIGURE 17: CHANGES TO THE W5503 WIRE BUNDLE [Group 3] ................... 1 0 8
FIGURE 18: CHANGES TO THE W5514 WIRE BUNDLE [Group 3] ................... 1 1 0
FIGURE 19: CHANGES TO THE W5503 AND W6414 WIRE BUNDLES [Group 4, 7] ......... 1 1 2
FIGURE 20: CHANGES TO THE W2508 WIRE BUNDLE [Group 2] ................... 1 1 3
FIGURE 21: CHANGES TO THE W5156 WIRE BUNDLE [Group 2, 6] ................. 1 1 5
FIGURE 22: CHANGES TO THE W5156 WIRE BUNDLE [Group 3] ................... 1 1 6
FIGURE 23: W2508 AND W2510 WIRE BUNDLES ROUTING [Group 1, 5] ............... 1 1 7
FIGURE 24: CHANGES TO THE W2508 WIRE BUNDLE [Group 1, 5] ................. 1 2 5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
4 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-21-1165Original Issue: January 07, 2010
Revision 3: July 16, 2014
ATA System: 2133
SUBJECT: AIR CONDITIONING - Cabin Pressure Indication and Warning System - Redundant
Pressure Switch Installation
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-19-11 is related to this service bulletin.
No more work is necessary on the airplane(s) changed in accordance with Revision 1 and Revision 2 of this
service bulletin.
REASON FOR REVISION
This revision is sent to make updates to the service bulletin to include configuration differences found by operators
during the incorporation of Revision 1 and Revision 2 of this service bulletin. Group 6 airplanes have been moved
from FIGURE 20 to FIGURE 9 because they have only two wires installed into the SP575 splice. Group 1 and
Group 5 airplanes have been moved from FIGURE 9 to a new FIGURE 24. The FIGURE 2 graphic has been
changed to show the measurements taken from the edge of the floor structure. Also, more general notes have
been added to the Work Instructions. FAA Airworthiness Directive AD 2012-19-11 has been added to this service
bulletin.
These sections were changed:
1. In Summary, Background, added Summary Evaluation table.
2. In Summary, Compliance and Paragraph 1.E., Compliance, added the AD 2012-19-11.
3. In Paragraph 1.B., Concurrent Requirements, added Revision 4 of the service bulletin 737-31A1332.
4. In Paragraph 1.F., Approval, added AMOC paragraph.
5. In Paragraph 1.G., Manpower, moved Group 6 airplanes to a separate table.
6. In Paragraph 1.J.1., Existing Data, added AD reference.
7. In Paragraph 1.K., Publications Affected, added Wiring Diagram Manual (WDM) and System Schematic
Manual (SSM) references.
8. In Paragraph 1.M., Software Accomplishment Summary, added a statement.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
5 of 126

### Page 6

9. In Paragraph 2.A., Material - Price and Availability, added the supplemental wire kit 280A3154-101 for
Group 1 airplanes and changed pricing data.
10. In Paragraph 2.C.1., Kits/Parts, added footnote (c) to the 280A3154-101 parts table.
11. In Paragraph 2.C.2., Parts and Materials Supplied by the Operator, note (d) is added.
12. In Paragraph 3.A., General Information, added notes.
13. In Paragraph 3.B., Work Instructions, steps 7, 14, 15 and 20, changed text.
14. In Paragraph 3.B., Work Instructions, step 10, changed a Figure reference.
15. In Paragraph 3.B., Work Instructions, added step 12 for Group 6 airplanes.
16. In FIGURE 2, changed the graphics to show the measurements taken from the edge of the floor
structure.
17. In FIGURE 3, added a note (f) to tell operators that the position of the second pressure switch may be
rotated 180 degrees as an option.
18. In FIGURE 9, added Group 6 airplanes.
19. New FIGURE 24 is added for Group 1 and Group 5 airplanes.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
January 07, 2010Original Issue:
July 16, 2010Revision 1:
April 30, 2012Revision 2:
July 16, 2014Revision 3:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
6 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 7

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-21-1165Original Issue: January 07, 2010
Revision 3: July 16, 2014
ATA System: 2133
SUBJECT: AIR CONDITIONING - Cabin Pressure Indication and Warning System - Redundant
Pressure Switch Installation
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
This service bulletin gives instructions to make changes to the Cabin Altitude Warning System. These changes
will install a second 10,000 foot cabin altitude pressure switch and new Aural Warning Module (AWM) M315. If
the changes in this service bulletin are not done, the cabin altitude warning may not function if there is a failure
of the 10,000 foot altitude pressure switch.
Boeing received a report from an operator that they had experienced a cabin depressurization. The flight crew
were not aware of the cabin depressurization and that the oxygen masks had been deployed until they were
informed by a member of the cabin crew. An investigation found that the flight crew did not get an aural warning
because of the failure of the cabin altitude 10,000 foot pressure switch.
The installation of the second 10,000 foot pressure switch and a new digital AWM M315 with two fully independent
channels and separate power supplies will reduce the possibility of the flight crew being not aware of a
depressurization event.
Boeing Service Related Problem (SRP) 737-SRP-21-0172 is related to this service bulletin.
Fleet Team Digest (FTD) 737NG-FTD-31-07001 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane YA010 by Service
Bulletin 737-21-1165 Original Issue before the release of Revision 1 of this service bulletin. The change completed
on airplane YA010 by Service Bulletin 737-21-1165 Original Issue is equivalent to the release of Revision 1 of
this service bulletin. Airplane YA010 has the configuration of a Group 2 airplane.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
7 of 126

### Page 8

ReferenceAffectedPlanning Data
Paragraph 1.E., Compliance and Paragraph
1.F., Approval
YesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedYesAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Parts/Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 38275-129S)
Get access to the flight compartment, to the area near the First Officer's left rudder pedal. Replace the existing
AWM M315 with a new AWM M315.
Group 1-3, 5-6:
Get access into the area forward of the nose landing gear wheel well. Install four nutplates on the cabin floor to
support the new second pressure switch. Install the second pressure switch S1153 on the ceiling of the forward
electronics compartment.
Group 1, 5:
Get access to the J46 Junction Box in the nose wheel well and change the W0066 wire bundle. Install a new
W5503 wire between the second pressure switch S1153 and the J46 Junction Box. Change the W5514 wire
bundle between the existing pressure switch S128 and the J46 Junction Box. Change the W5514 wire bundle
between the AWM M315 and the J46 Junction Box. Change the W2508 and W2510 wire bundles between the
P5 panel and the J46 Junction Box.
Group 2, 6:
Get access to the J46 Junction Box in the nose wheel well and change the W0066 wire bundle. Install a new
W5503 wire between the second pressure switch S1153 and the J46 Junction Box. Change the W5514 wire
bundle between the existing pressure switch S128 and the J46 Junction Box. Change the W5514 wire bundle
between the AWM M315 and the J46 Junction Box. Change the W2508, W2510 and W5156 wire bundles
between the P5 panel and the J46 Junction Box.
Group 3:
Install a new W5503 wire between the second pressure switch S1153 and the TB602 terminal block. Change
the W5514 wire bundle between the existing pressure switch S128 and the TB602 terminal block. Change the
W5514 wire bundle between the AWM M315 and the TB604Y terminal block. Change the W2508 wire bundle
between the P5 panel and the TB602/TB604Y terminal blocks. Change the W5156 wire bundle between the
TB501Y and the TB604Y terminal blocks.
Group 4, 7:
At the J46 Junction Box, connect one W5503 and two W6414 capped and stowed wires.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
8 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 9

Do the functional check of the Cabin Altitude Warning System.
EFFECTIVITY
737-600/-700/-700C/-800/-900/-900ER Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected
airplanes.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-19-11 is related to this service bulletin.
The effective date of AD 2012-19-11 is November 7, 2012.
Boeing recommends that the change given in this service bulletin be done within 72 months after the effective
date of AD 2012-19-11.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
26.3547.45Group 1, 5
31.0053.55Group 2, 6
22.8538.85Group 3
7.059.80Group 4, 7
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
9 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 10 (OCR)

BOEING SERVICE BULLETIN 737-21-1165
CHANGE WIRE BUNDLE
N2508 GROUP 1-3, 5-6
AND WIRE BUNDLE
W2510 GROUP 1-2, 5-6  CHANGE WIRE  P6 LOAD CONTROL
P5-16 PANEL  BUNDLE W5514  CENTER
GROUP 1-3, 5-6
REPLACE THE AURAL  CHANGE WIRE BUNDLES
M315  WARNING MODULE  W2508, W5156  GROUP 1-3, 5-6
TB602, TB604 CHANGE
WIRE BUNDLES W5503,
W5514, W5156
GROUP 3
J46 JUNCTION BOX:
CONNECT ONE W5503
AND TWO W6414 WIRES
GROUP 4, 7
AREA FORWARD OF THE
NOSE LANDING GEAR
WHEEL WELL:  J46 JUNCTION BOX
DRILL FOUR HOLES,  CHANGE WIRE
INSTALL NUTPLATES AND  CHANGE WIRE
PRESSURE SWITCH  INSTALL THE SECOND  BUNDLES  W5503, W5514  1745315
GROUP 1-3, 5-6  GROUP 1-3, 5-6
Original Issue: January 07, 2010
Revision 3: July 16, 2014  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-21-1165
Work - See page 1 for details.  10 of 126

### Page 11

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-21-1165
Original Issue: January 07, 2010
Revision 3: July 16, 2014
ATA System: 2133
SUBJECT: AIR CONDITIONING - Cabin Pressure Indication and Warning System - Redundant
Pressure Switch Installation
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR38275-129S for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes with different wire configuration that need to install the
second pressure switch.
-1
Airplanes with different wire configuration that need to install the
second pressure switch.
-2
Airplanes with different wire configuration that need to install the
second pressure switch.
-3
Airplanes with the second pressure switch installed. The associated
wires are capped and stowed.
-4
Airplanes with the high altitude option and different wire configuration
that need to install the second pressure switch.
-5
Airplanes with the high altitude option and different wire configuration
that need to install the second pressure switch.
-6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
11 of 126

### Page 12

DESCRIPTIONCONFIGURATIONGROUP
Airplanes with the high altitude option and the second pressure switch
installed. The associated wires are capped and stowed.
-7
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
GroupVariable Number
3YA001 - YA008
2YA009 - YA099
2YA101 - YA199
3YA201 - YA202
2YA203 - YA211
2YA221
3YA231 - YA235
2YA236 - YA242
3YA251
2YA252 - YA256
2YA271 - YA272
2YA291
3YA301
2YA302
2YA311 - YA314
2YA321 - YA323
2YA336 - YA345
2YA351
2YA356 - YA357
2YA366 - YA367
2YA371 - YA377
6YA501 - YA536
2YA541 - YA552
2YA571 - YA578
2YA601 - YA615
2YA621 - YA622
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
12 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 13

GroupVariable Number
2YA626 - YA631
2YA635 - YA636
2YA641 - YA642
2YA645 - YA650
2YA656 - YA659
2YA666 - YA667
2YA671 - YA672
2YA681 - YA691
2YA701 - YA710
2YA721 - YA722
2YA731 - YA734
2YA751 - YA754
6YA755 - YA756
2YA801 - YA803
2YA809
6YA811 - YA814
2YA831 - YA835
2YA841 - YA862
2YA881 - YA882
2YA891 - YA892
6YA961 - YA978
2YB001 - YB006
2YB101 - YB132
2YB151 - YB153
2YB156 - YB158
2YB161 - YB164
2YB171 - YB172
6YB181 - YB184
2YB201 - YB208
2YB271
2YB276
2YB301 - YB310
2YB371 - YB392
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
13 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 14

GroupVariable Number
2YB501 - YB502
2YB521 - YB526
2YB541 - YB544
2YB551
2YB561 - YB570
6YB571 - YB580
2YB581 - YB598
2YB601 - YB632
2YB651
2YB656
2YB671 - YB672
2YB851 - YB863
2YB871 - YB874
2YB881 - YB893
2YB901 - YB903
2YB911
2YB961 - YB967
1YB968 - YB973
4YB974
1YB986 - YB987
3YC001 - YC003
2YC004 - YC030
2YC051 - YC084
2YC091 - YC094
2YC101 - YC104
2YC111 - YC113
2YC121
2YC126 - YC127
2YC136 - YC141
2YC146 - YC147
2YC151 - YC156
2YC166 - YC171
2YC176 - YC178
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
14 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 15

GroupVariable Number
1YC179
2YC186 - YC190
2YC201 - YC203
2YC206 - YC207
2YC301 - YC305
6YC321 - YC380
2YC381 - YC387
2YC391 - YC394
2YC396
2YC401 - YC417
2YC421 - YC422
2YC426 - YC428
2YC436 - YC439
2YC441 - YC448
2YC451 - YC455
2YC459
2YC461 - YC467
2YC471 - YC499
2YC501 - YC526
2YC571 - YC583
2YC587 - YC589
2YC591 - YC593
2YC601 - YC655
2YC681 - YC696
2YC701 - YC715
2YC720 - YC725
2YC727 - YC749
1YC750
2YC751 - YC752
2YC761 - YC770
2YC781 - YC793
2YC801 - YC892
2YC901 - YC907
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
15 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 16

GroupVariable Number
2YC921 - YC922
2YC931 - YC932
2YC941 - YC951
2YC971 - YC978
2YC981 - YC983
2YD001 - YD007
2YD021 - YD025
2YD041 - YD057
2YD081 - YD084
2YD101 - YD110
2YD121 - YD126
2YD151 - YD159
2YD171 - YD172
2YD201 - YD203
2YD206 - YD209
2YD216 - YD219
2YD251 - YD254
2YD256 - YD257
2YD261
2YD301 - YD334
2YD391
6YD401 - YD410
6YD412 - YD414
7YD415
2YD481 - YD485
2YD491 - YD499
2YD501 - YD512
2YD531 - YD535
2YD541 - YD547
2YD561 - YD564
2YD571 - YD572
2YD591 - YD595
6YD601 - YD612
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
16 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 17

GroupVariable Number
2YD651 - YD655
2YE001 - YE020
2YE051
2YE101 - YE109
2YE151 - YE157
2YE171 - YE172
2YE201 - YE206
2YE301 - YE305
2YE321 - YE326
2YE371 - YE383
4YF001
1YF021 - YF023
4YF024 - YF026
1YF051 - YF052
1YF086
1YF106 - YF107
1YF111
1YF176 - YF178
2YG001 - YG018
6YG019
2YG020 - YG023
6YG024 - YG044
6YG061 - YG064
6YG066 - YG089
6YG091 - YG099
6YG101 - YG103
6YG111 - YG112
5YG113 - YG114
6YG116 - YG117
5YG118 - YG120
6YG201 - YG205
6YG211 - YG214
2YG251 - YG252
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
17 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 18

GroupVariable Number
2YG501 - YG509
2YG601 - YG602
5YG701
1YG711
2YH001 - YH004
1YH005 - YH010
4YH011 - YH012
1YH051 - YH054
5YH101 - YH111
7YH112 - YH115
1YH201 - YH202
1YH206 - YH207
7YH301
2YJ001 - YJ002
6YJ003 - YJ008
5YJ009 - YJ010
2YJ011 - YJ013
2YJ021
2YJ471 - YJ480
6YJ501 - YJ517
6YJ531 - YJ558
5YJ559 - YJ564
7YJ565 - YJ568
6YJ591 - YJ594
5YJ595 - YJ597
2YJ631 - YJ632
2YJ671 - YJ694
2YJ801 - YJ867
2YJ871 - YJ872
1YJ873 - YJ874
4YJ875
2YJ901 - YJ903
1YJ904
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
18 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 19

GroupVariable Number
1YJ908
2YJ911 - YJ928
1YJ929
2YJ931 - YJ936
1YJ937
2YJ941 - YJ951
1YJ952 - YJ956
2YJ976 - YJ977
2YK001 - YK007
2YK101 - YK104
2YK111 - YK112
2YK121 - YK122
2YK131 - YK132
1YK133
2YK136 - YK139
2YK141 - YK142
2YK146 - YK148
2YK151 - YK154
2YK161 - YK166
1YK167
1YK171
1YK176
2YK301 - YK307
1YK308 - YK309
2YK321 - YK334
1YK335 - YK337
4YK338 - YK339
2YK361 - YK371
1YK372 - YK374
4YK375
2YK401 - YK406
2YK426 - YK427
2YK431 - YK450
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
19 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 20

GroupVariable Number
2YK456 - YK460
2YK476
2YK480 - YK484
1YK485
1YK495
2YK511 - YK514
1YK515 - YK516
1YK521
4YK522 - YK523
2YK551 - YK565
1YK566
4YK567 - YK570
2YK571
2YK576 - YK577
2YK580 - YK584
1YK585
2YK601 - YK602
2YK606 - YK607
2YK611 - YK614
1YK615
4YK616
2YK621 - YK625
4YK626 - YK627
2YK631 - YK633
1YK634
2YK641 - YK642
1YK643 - YK644
2YK651 - YK657
1YK658 - YK661
4YK671
2YK701 - YK707
1YK708 - YK712
2YK716 - YK717
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
20 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 21

GroupVariable Number
1YK718 - YK719
2YK721 - YK734
1YK735 - YK741
1YK751 - YK758
4YK759 - YK761
2YK791 - YK792
2YK796 - YK797
2YK801 - YK848
1YK849 - YK887
2YK901 - YK910
4YK911
1YK918
2YK921
1YK922 - YK927
2YK941 - YK947
1YK948 - YK951
4YK952 - YK953
2YK961 - YK968
1YK969 - YK971
2YK981 - YK982
1YK983 - YK984
4YK985
2YL001 - YL005
2YL011 - YL015
1YL016
2YL021 - YL023
1YL024
2YL051 - YL052
2YL056 - YL057
2YL061
2YL066
1YL067 - YL069
1YL076 - YL077
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
21 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 22

GroupVariable Number
2YL101
1YL102 - YL115
4YL116 - YL117
2YL201 - YL202
1YL203 - YL208
4YL209
2YL271 - YL272
5YL281
1YL282
2YL301 - YL303
2YL311 - YL312
1YL316 - YL319
4YL351
1YL371 - YL373
2YL421 - YL423
1YL424 - YL426
2YL431 - YL433
1YL434 - YL437
2YL461 - YL468
1YL469 - YL472
4YL473
2YL501 - YL503
1YL504 - YL505
1YL531 - YL533
4YL534
1YL561 - YL563
4YL564 - YL565
1YL591 - YL592
1YL601 - YL606
4YL611
4YL616
4YL621
1YL661 - YL662
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
22 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 23

GroupVariable Number
4YL663 - YL664
1YL901 - YL905
4YL906 - YL908
1YL931 - YL932
4YL933
1YL951
4YL952
2YM101
6YM102 - YM103
2YM201 - YM230
1YM231 - YM238
2YM251 - YM299
2YM301 - YM329
1YM330 - YM369
4YM370 - YM374
2YM471
2YM481 - YM484
2YM501 - YM512
1YM513 - YM515
2YM521 - YM522
2YM541
2YM551 - YM553
2YM571 - YM572
2YM581 - YM582
6YM591 - YM593
2YM631 - YM634
2YM641 - YM644
1YM645 - YM650
4YM651
2YM671
1YM672
4YM691 - YM693
7YM701 - YM702
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
23 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 24

GroupVariable Number
2YN001 - YN011
1YN012 - YN016
6YN021
5YN022 - YN023
7YN024
2YN061
2YN071 - YN077
1YN078 - YN079
5YN091 - YN092
2YN101 - YN112
5YN121
2YN201
1YN211 - YN215
4YN216
1YN231
4YN232
2. Spares Affected
None.
B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
DescriptionService BulletinCompany
Installs new flight deck warning lights.737-31A1332 Revision 1, Revision 2, Revi-
sion 3, Revision 4
Boeing
C. Reason
This service bulletin gives instructions to make changes to the Cabin Altitude Warning System. These
changes will install a second 10,000 foot cabin altitude pressure switch and new Aural Warning Module
(AWM) M315. If the changes in this service bulletin are not done, the cabin altitude warning may not
function if there is a failure of the 10,000 foot altitude pressure switch.
Boeing received a report from an operator that they had experienced a cabin depressurization. The
flight crew were not aware of the cabin depressurization and that the oxygen masks had been deployed
until they were informed by a member of the cabin crew. An investigation found that the flight crew did
not get an aural warning because of the failure of the cabin altitude 10,000 foot pressure switch.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
24 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 25

The installation of the second 10,000 foot pressure switch and a new digital AWM M315 with two fully
independent channels and separate power supplies will reduce the possibility of the flight crew being
not aware of a depressurization event.
Boeing Service Related Problem (SRP) 737-SRP-21-0172 is related to this service bulletin.
Fleet Team Digest (FTD) 737NG-FTD-31-07001 is related to this service bulletin.
Revision 1 was sent to tell operators that airplanes with the high altitude landing configuration of the
Cabin Altitude Warning System are added to this service bulletin effectivity. New Groups 5, 6 and 7
are created.
As a part of a service bulletin validation program, this change was completed on airplane YA010 by
Service Bulletin 737-21-1165 Original Issue before the release of Revision 1 of this service bulletin.
The change completed on airplane YA010 by Service Bulletin 737-21-1165 Original Issue is equivalent
to the release of Revision 1 of this service bulletin. Airplane YA010 has the configuration of a Group 2
airplane.
Revision 2 was sent to advise operators that in Figures 12 and 20, the illustration has been changed
to show wire references W5514 and W5156 as dashed. Weight and Balance information is changed
to "None" for Group 4 and Group 7 airplanes. An incorrect AMM reference has been removed from
Work Instructions and Existing Data. The W5514-0018-22 wire has been deleted from wire kit
280A3147-106. Two new contacts BACC47DR1 are added to the Parts and Materials Supplied by the
Operator to replace the incorrect pin contacts in Figures 14 and 17. Also, a new splice D-436-61 is
added to the Parts and Materials Supplied by the Operator to replace the incorrect splice in Figures
12 and 20.
Revision 3 is sent to make updates to the service bulletin to include configuration differences found by
operators during the incorporation of Revision 1 and Revision 2 of this service bulletin. Group 6 airplanes
have been moved from FIGURE 20 to FIGURE 9 because they have only two wires installed into the
SP575 splice. Group 1 and Group 5 airplanes have been moved from FIGURE 9 to a new FIGURE
24. The FIGURE 2 graphic has been changed to show the measurements taken from the edge of the
floor structure. Also, more general notes have been added to the Work Instructions. FAA Airworthiness
Directive AD 2012-19-11 has been added to this service bulletin.
D. Description
Get access to the flight compartment, to the area near the First Officer's left rudder pedal. Replace the
existing AWM M315 with a new AWM M315.
Group 1-3, 5-6:
Get access into the area forward of the nose landing gear wheel well. Install four nutplates on the cabin
floor to support the new second pressure switch. Install the second pressure switch S1153 on the
ceiling of the forward electronics compartment.
Group 1, 5:
Get access to the J46 Junction Box in the nose wheel well and change the W0066 wire bundle. Install
a new W5503 wire between the second pressure switch S1153 and the J46 Junction Box. Change the
W5514 wire bundle between the existing pressure switch S128 and the J46 Junction Box. Change the
W5514 wire bundle between the AWM M315 and the J46 Junction Box. Change the W2508 and W2510
wire bundles between the P5 panel and the J46 Junction Box.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
25 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 26

Group 2, 6:
Get access to the J46 Junction Box in the nose wheel well and change the W0066 wire bundle. Install
a new W5503 wire between the second pressure switch S1153 and the J46 Junction Box. Change the
W5514 wire bundle between the existing pressure switch S128 and the J46 Junction Box. Change the
W5514 wire bundle between the AWM M315 and the J46 Junction Box. Change the W2508, W2510
and W5156 wire bundles between the P5 panel and the J46 Junction Box.
Group 3:
Install a new W5503 wire between the second pressure switch S1153 and the TB602 terminal block.
Change the W5514 wire bundle between the existing pressure switch S128 and the TB602 terminal
block. Change the W5514 wire bundle between the AWM M315 and the TB604Y terminal block. Change
the W2508 wire bundle between the P5 panel and the TB602/TB604Y terminal blocks. Change the
W5156 wire bundle between the TB501Y and the TB604Y terminal blocks.
Group 4, 7:
At the J46 Junction Box, connect one W5503 and two W6414 capped and stowed wires.
Do the functional check of the Cabin Altitude Warning System.
Revision 1 - No more work is necessary on airplanes changed in accordance with the original issue of
this service bulletin.
Revision 2 - No more work is necessary on airplanes changed in accordance with Revision 1 of this
service bulletin.
Revision 3 - No more work is necessary on airplanes changed in accordance with Revision 1 and
Revision 2 of this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1, 5:
Affected Maintenance Zones
ZoneModel
112, 114, 211, 212, 222737-700, 737-700C, 737-800,
737-900ER
Group 2:
Affected Maintenance Zones
ZoneModel
112, 114, 211, 212, 222737-600, 737-700, 737-700C,
737-800, 737-900, 737-900ER
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
26 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 27

Group 3:
Affected Maintenance Zones
ZoneModel
112, 114, 211, 212, 222737-700, 737-800
Group 4, 7:
Affected Maintenance Zones
ZoneModel
114737-700, 737-800, 737-900ER
Group 6:
Affected Maintenance Zones
ZoneModel
112, 114, 211, 212, 222737-700, 737-800, 737-900
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-19-11 is related to this service
bulletin. The effective date of AD 2012-19-11 is November 7, 2012.
Boeing recommends that the change given in this service bulletin be done within 72 months after the
effective date of AD 2012-19-11.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
In addition, the Manager of the FAA Seattle Aircraft Certification Office approves the action (i.e. inspection
or modification) defined in this service bulletin as an alternative method of compliance to the requirements
of paragraph (g) of AD 2012-19-11. All provisions of AD 2012-19-11 that are not specifically referenced
in the above statement remain fully applicable and must be complied with.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
27 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 28

G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1, 5:
Elapsed
Hours
Task HoursNumber of PersonsTask
1.751.751Open Access
0.500.501FIGURE 1
0.750.751FIGURE 2
0.500.501FIGURE 3
4.108.202FIGURE 4 and FIGURE 5
7.7515.502FIGURE 23, FIGURE 24  and
FIGURE 10
6.2512.502FIGURE 13, FIGURE 14 and
FIGURE 15
1.751.751Close Access
3.006.002Test
26.3547.45TOTAL FOR EACH AIRPLANE
Group 2:
Elapsed
Hours
Task HoursNumber of PersonsTask
1.751.751Open Access
0.500.501FIGURE 1
0.750.751FIGURE 2
0.500.501FIGURE 3
3.156.302FIGURE 6 and FIGURE 7
10.1520.302FIGURE 8, FIGURE 20 and
FIGURE 10
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
28 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 29

Group 2:
Elapsed
Hours
Task HoursNumber of PersonsTask
6.2512.502FIGURE 13, FIGURE 14 and
FIGURE 15
3.203.201FIGURE 21
1.751.751Close Access
3.006.002Test
31.0053.55TOTAL FOR EACH AIRPLANE
Group 6:
Elapsed
Hours
Task HoursNumber of PersonsTask
1.751.751Open Access
0.500.501FIGURE 1
0.750.751FIGURE 2
0.500.501FIGURE 3
3.156.302FIGURE 6 and FIGURE 7
10.1520.302FIGURE 8, FIGURE 9 and
FIGURE 10
6.2512.502FIGURE 13, FIGURE 14 and
FIGURE 15
3.203.201FIGURE 21
1.751.751Close Access
3.006.002Test
31.0053.55TOTAL FOR EACH AIRPLANE
Group 3:
Elapsed
Hours
Task HoursNumber of PersonsTask
1.751.751Open Access
0.500.501FIGURE 1
0.750.751FIGURE 2
0.500.501FIGURE 3
6.5012.502FIGURE 11 and FIGURE 12
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
29 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 30

Group 3:
Elapsed
Hours
Task HoursNumber of PersonsTask
7.0014.002FIGURE 16, FIGURE 17 and
FIGURE 18
1.101.101FIGURE 22
1.751.751Close Access
3.006.002Test
22.8538.85TOTAL FOR EACH AIRPLANE
Group 4, 7:
Elapsed
Hours
Task HoursNumber of PersonsTask
1.751.751Open Access
0.500.501FIGURE 1
0.300.301FIGURE 19
1.751.751Close Access
2.755.502Test
7.059.80TOTAL FOR EACH AIRPLANE
The change to the Aural Warning Module assembly as given in BAE Systems SB 69-78214-31-03 is
not included.
H. Weight and Balance Changes
Group 1-3, 5-6:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+510+2.5737-600
+375+2.5737-700/700C
+80+2.5737-800
-75+2.5737-900/900ER
Group 4, 7:
None.
I. Electrical Load Data
Not changed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
30 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 31

J. References
1. Existing Data:
a. Engineering Change Memo PRR 38275-129S
b. Boeing Service Bulletin 737-31A1332
c. Boeing Service Related Problem (SRP) 737-SRP-21-0172
d. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19, 20-60-08, 20-61-11,
20-61-19, 20-74-11, 20-90-15
e. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 21-33-00, 21-33-04, 24-22-00,
25-11-01, 31-51-00, 31-51-04, 34-16-00
f. 737-600/700/800/900 Wiring Diagram Manual (WDM) 21-33-11, 31-31-15, 31-53-11
g. BAE Systems Service Bulletin 69-78214-31-03
NOTE: The supplier was told to send copies of the service bulletin to each operator.
h. Standard Overhaul Practices Manual SOPM 20-30-03
i. Fleet Team Digest (FTD) 737NG-FTD-31-07001
j. 737 Structural Repair Manual (SRM) Chapter 51
k. Boeing Drawing 65-887000
l. BAE Systems Component Maintenance Manual CMM 31-26-20
m. Federal Aviation Administration (FAA) Airworthiness Directive AD 2012-19-11
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Web Instl - Crew Floor141A5120
Switch Instl - Pressurization Air Conditioning216A5001
Wire Bundle Instl - Left, Right Cab and Upper Cab Floor288A4101
Wire Bundle Instl - J46 Junction Box288A4119
Wire Bundle Instl - Right E/E Bay Sidewall288A4121
Wire Bundle Instl - Forward Wheel Well288A4130
Wire Bundle Instl - Flight Deck Floor Beams288A4140
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
31 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 32

TitleDrawing Number
Wire Bundle Instl - Forward Overhead Instrument Panel288A4156
Wire Bundle Instl - Aft Overhead Instrument Panel288A4157
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
Chap 15, Section 20737 Flight Crew Operations Manual
21-33, 31-51737 Maintenance Manual
21-33, 31-31, 31-53, Equipment List737 Wiring Diagram Manual
11-32, 21-33, 31-51737 Illustrated Parts Catalog
21-33, 31-31, 31-53737 System Schematic Manual
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated this service bulletin for effects on Fatigue Critical Structure (FCS) and for
changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This
service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
32 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 33

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1, 5:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 03
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 03 date
of this Service
Bulletin (Calendar
Days)
NameKit Number
6,386.00203Top Kit - Cabin Altitude Pressure Switch In-
stallation
002A0006-60 (a)
(a) For Group 1 airplanes, the operators should also order the supplemental wire kit 280A3154-101. If an
operator previously accomplished this service bulletin, this supplemental kit is not necessary.
Group 1:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 03
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 03 date
of this Service
Bulletin (Calendar
Days)
NameKit Number
133.00105Supplemental Wire Kit - ASSY W2508280A3154-101 (a)
(a) This supplemental wire kit should be added to the top kit 002A0006-60 for Group 1 airplanes if an operator
has not previously accomplished this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
33 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 34

Group 2, 6:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 03
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 03 date
of this Service
Bulletin (Calendar
Days)
NameKit Number
6,632.00203Top Kit - Cabin Altitude Pressure Switch In-
stallation
002A0006-73
Group 3:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the Revision 03
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
Revision 03 date
of this Service
Bulletin (Calendar
Days)
NameKit Number
3,831.00222Top Kit - Cabin Altitude Pressure Switch In-
stallation
002A0006-68
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
Kit 002A0006
NotesNameQTYNew Part Number
-73-68-60
TOP KIT, RETROFIT - CABIN ALTI-
TUDE PRESSURE SWITCH INSTALLA-
TION
.-002A0006-60
TOP KIT, RETROFIT - CABIN ALTI-
TUDE PRESSURE SWITCH INSTALLA-
TION
-.002A0006-68
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
34 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 35

Kit 002A0006
NotesNameQTYNew Part Number
-73-68-60
TOP KIT, RETROFIT - CABIN ALTI-
TUDE PRESSURE SWITCH INSTALLA-
TION
-..002A0006-73
SWITCH-PRESSURE111214C50-2
LACING TAPE111280A2001-1
Assy - W00661.1280A3147-101
Assy - W2508111280A3147-102
Assy - W25101.1280A3147-103
Assy - W5503.1.280A3147-104
Assy - W55031.1280A3147-105
Assy - W55141.1280A3147-106
Assy - W5514.1.280A3147-107
MARKER (10,000 FT) SWITCH NO.1111BAC27DAC155
MARKER (10,000 FT) SWITCH NO.2111BAC27DAC156
NUTPLATE444BACN10JR3CFD
RIVET888BACR15BA3AD4C
SCREW, CAP444BACS12GU3K6
Assy - W250811.280A3154-101
Assy - W5156.1.280A3154-102
Assy - W51561..280A3154-103
Kit 280A2001
NotesNameQTYNew Part Number
-1
(a)LACING TAPE-280A2001-1
(a) BMS 13-54 lacing tape, color white, length 18000
inches.
Kit 280A3147
NotesNameQTYNew Part Number
-106-105-104-103-102-101
Wire Bundle W0066
Assembly
.....-280A3147-101
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
35 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 36

Kit 280A3147
NotesNameQTYNew Part Number
-106-105-104-103-102-101
Wire Bundle W2508
Assembly
....-.280A3147-102
Wire Bundle W2510
Assembly
...-..280A3147-103
Wire Bundle W5503
Assembly
..-...280A3147-104
Wire Bundle W5503
Assembly
.-....280A3147-105
Wire Bundle W5514
Assembly
-.....280A3147-106
(a)Wire, Identified as
W066-0017-22, Length
36 inches
.....1-
(a)Wire, Identified as
W066-0018-22, Length
36 inches
.....1-
(a)Wire, Identified as
W066-0019-22, Length
48 inches
.....1-
(a)Wire, Identified as
W066-0020-22, Length
48 inches
.....1-
(a) (d)Wire, Identified as
W066-0068-22, Length
36 inches
.....1-
(a) (e)Wire, Identified as
W066-0336-22, Length
48 inches
.....1-
(a) (e)Wire, Identified as
W066-0340-22, Length
48 inches
.....1-
(a) (e)Wire, Identified as
W066-0341-22, Length
48 inches
.....1-
(a)Wire, Identified as
W066-0356-22, Length
36 inches
.....1-
(a)Wire, Identified as
W066-0357-22, Length
36 inches
.....1-
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
36 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 37

Kit 280A3147
NotesNameQTYNew Part Number
-106-105-104-103-102-101
(a)Wire, Identified as
W066-0358-22, Length
36 inches
.....1-
Connector ID Tape -
D46104J
.....1280A3147-10101
Connector ID Tape -
D46108J
.....1280A3147-10102
Connector ID Tape -
D46116J
.....1280A3147-10103
(a)Wire, Identified as
W2508-0030-22,
Length 120 inches
....1.-
(a)Wire, Identified as
W2508-5506-22,
Length 100 inches
....1.-
(a)Wire, Identified as
W2508-5507-22,
Length 500 inches
....1.-
(a)Wire, Identified as
W2508-5508-22,
Length 500 inches
....1.-
Connector ID Tape -
D654
....1.280A3147-10201
(a)Wire, Identified as
W2510-0101-22,
Length 375 inches
...1..-
(b)Wire, Identified as
W5503-0017-20,
Length 170 inches
..1...-
(b)Wire, Identified as
W5503-0018-20,
Length 55 inches
..1...-
Connector ID Tape -
D14284
..1...280A3147-10401
(b)Wire, Identified as
W5503-0017-20,
Length 185 inches
.1....-
(b)Wire, Identified as
W5503-0018-20,
Length 55 inches
.1....-
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
37 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 38

Kit 280A3147
NotesNameQTYNew Part Number
-106-105-104-103-102-101
Connector ID Tape -
D14284
.1....280A3147-10501
(a)Wire, Identified as
W5514-0014-22,
Length 200 inches
1.....-
(a)Wire, Identified as
W5514-0015-22,
Length 200 inches
1.....-
(b)Wire, Identified as
W5514-5550-20,
Length 60 inches
1.....-
(a)Wire, Identified as
W5514-5551-22,
Length 200 inches
1.....-
(a)Wire, Identified as
W5514-5552-22,
Length 200 inches
1.....-
(c)CONTACT, PIN10..101010BACC47CN1S
(c)CONTACT, SOCKET20...2012BACC47CP1S
(c) (f)CONTACT.44...BACC47DP1
(c)CONTACT, SOCKET2.....BACC47DR1
CONNECTOR, PLUG.11...BACC63CE14S-7S
(c)CONTACT, SOCKET,
SIZE 20
.....4CTA-0165
(c)CONTACT, PIN, SIZE
20
.4....CTA-0166
(c)PLUG.5050...MS27488-16-1
(c)TERMINAL MODULE.....1S280W555-104
(c)TERMINAL MODULE.....1S280W555-751
(c)CONTACT, PIN, SIZE
16
.22...S280W555-916
(c)CONTACT, PIN, SIZE
20
3.104410S280W555-920
(a) Make from BMS 13-58, Type 1, Class 1, AWG 22.
(b) Make from BMS 13-58, Type 1, Class 1, AWG 20.
(c) There are more parts than are necessary.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
38 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 39

Kit 280A3147
NotesNameQTYNew Part Number
-106-105-104-103-102-101
(d) This wire is applicable to Group 2 and Group 6 airplanes only.
(e) These wires are applicable to Group 1 and Group 5 airplanes only.
(f) This part from the wire kits 280A3147-104 and 280A3147-105 can be scrapped because
it is replaced with the part number BACC47DR1.
Kit 280A3147
NotesNameQTYNew Part Number
-107
Wire Bundle W5514 Assembly-280A3147-107
(a)Wire, Identified as W5514-0014-22,
Length 400 inches
1-
(a)Wire, Identified as W5514-0015-22,
Length 200 inches
1-
(b)Wire, Identified as W5514-5550-20,
Length 60 inches
1-
(a)Wire, Identified as W5514-5551-22,
Length 200 inches
1-
(a)Wire, Identified as W5514-5552-22,
Length 200 inches
1-
(c)CONTACT, SOCKET20BACC47CP1S
(c)CONTACT, SOCKET4BACC47DR1
(c)CONTACT3M39029/1-101
TERMINAL MODULE1S280W555-104
TERMINAL MODULE1S280W555-751
(c)CONTACT, PIN, SIZE 206S280W555-920
(a) Make from BMS 13-58, Type 1, Class 1, AWG 22.
(b) Make from BMS 13-58, Type 1, Class 1, AWG 20.
(c) There are more parts than are necessary.
Kit 280A3154
NotesNameQTYNew Part Number
-103-102-101
Wire Bundle W2508 Assembly.-280A3154-101
Wire Bundle W5156 Assembly.-.280A3154-102
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
39 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 40

Kit 280A3154
NotesNameQTYNew Part Number
-103-102-101
Wire Bundle W5156 Assembly-..280A3154-103
(a)Wire, Identified as W2508-6018-22,
Length 500 inches
..1-
Splice ID..1280A3154-10102
(a)Wire, Identified as W5156-5534-22,
Length 80 inches
.1.-
(a)Wire, Identified as W5156-5533-22,
Length 334 inches
1..-
(b)CONTACT, SOCKET..2BACC47CP1S
(c)SPLICE - SEALING SLEEVE..1D-436-59
(b)CONTACT, PIN, SIZE 2024.S280W555-920
(b)CONTACT, PIN2..BACC47CN1S
(a) Make from BMS 13-58, Type 1, Class 1, AWG 22.
(b) There are more parts than are necessary.
(c) This part from the wire kit 280A3154-101 can be scrapped because it is replaced with
the part number D-436-61.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a) (b) (c)Aural Warning Module M315169-78214-4
Contact, Socket2BACC47DR1
(d)Splice1D-436-61
(a) You can get the new part by reworking the existing part as given in BAE Systems SB 69-
78214-31-03.
(b) BAE Systems Controls Inc. (Cage Code 89954), 600 Main Street, Johnson City, NY
13790-1806, USA.
(c) If you use the existing part, you cancel the effect of the change given in this service bulletin.
(d) The splice part number D-436-43 is a satisfactory alternative to the splice part number
D-436-61.
3. Parts Modified and Reidentified
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
40 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 41

4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
41 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 42

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
42 of 126
BOEING SERVICE BULLETIN 737-21-1165
BLANK PAGE

### Page 43

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of 737
Airplane Maintenance Manual (AMM).
— Values for electrical maintenance tasks are included in Chapter 20 of
Standard Wiring Practices Manual (SWPM).
— Values for engine maintenance tasks are included in Chapter 70 of 737
Airplane Maintenance Manual (AMM).
— Non-standard torque values for maintenance tasks are included in the
applicable installation step.
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
5. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
6. The necessary conditions for selection of clamp type and size are included in SWPM
20-10-12. If any wire bundle support clamp specified in this service bulletin does not
make a correct fit on the wire bundle, refer to SWPM 20-10-12 as an accepted
procedure to select a clamp that fits correctly.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
43 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 44

7. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
8. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
9. The instructions in Paragraph 3.B., Work Instructions and the figures can include
operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated
Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing
Index contain data on versions of the tools or test equipment that you can use. It is
permitted to use replaced tools. It is not permitted to use superseded tools.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
12. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
13. If shading is used, shaded areas in Figures are to separate the non-critical and
non-authoritative information from the critical and authoritative information.
14. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
B. WORK INSTRUCTIONS
1. Remove electrical power from the airplane. Refer to 737-600/700/800/900 AMM 24-22-00 as an
accepted procedure.
2. Get access to the flight compartment, to the area near the First Officer's left rudder pedal. Remove
the Captain's and First Officer's seats. Refer to 737-600/700/800/900 AMM 25-11-01 as an accepted
procedure. Remove R/H wire raceway panels and First Officer's rudder pedal panels.
3. Replace the existing Aural Warning Module (AWM) M315 with a new AWM M315 in accordance
with FIGURE 1.
4. Get access to the cockpit floor below the P9 panel approximately at STA 196, WL 208, RBL 2.
Remove panels from the P9 panel as required.
5. At the lower forward fuselage, open the Forward Access Door 112A to get access into the area
forward of the nose landing gear wheel well.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
44 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 45

6. Group 1-3, 5-6:
Drill four holes on the cockpit floor and install four nutplates to support the new second pressure
switch in accordance with FIGURE 2.
7. Group 1-3, 5-6:
On the ceiling of the forward electronics compartment, install the new second pressure switch
S1153 for the cabin altitude warning in accordance with FIGURE 3.
8. Group 1, 5:
Get access to the J46 Junction Box in the nose wheel well. Change the W0066 wire bundle in
accordance with FIGURE 4 and FIGURE 5.
NOTE: The removal of the J46 box is necessary to get access to the wiring affected by this
service bulletin.
9. Group 2, 6:
Get access to the J46 Junction Box in the nose wheel well. Change the W0066 wire bundle in
accordance with FIGURE 6 and FIGURE 7.
NOTE: The removal of the J46 box is necessary to get access to the wiring affected by this
service bulletin.
10. Group 1, 5:
Get access to the P5-16 Cabin Altitude and Rate of Climb Panel in the flight compartment. Change
the W2508 and W2510 wire bundles between the P5 panel and the J46 Junction Box in accordance
with FIGURE 23, FIGURE 24  and FIGURE 10.
NOTE: The removal and reinstallation of the outboard raceway covers in the flight compartment
is necessary to get access to the wiring affected by this service bulletin.
11. Group 2:
Get access to the P5-16 Cabin Altitude and Rate of Climb Panel in the flight compartment. Change
the W2508, W2510 and W5156 wire bundles between the P5 panel and the J46 Junction Box in
accordance with FIGURE 8, FIGURE 20 and FIGURE 10.
NOTE: The removal and reinstallation of the outboard raceway covers in the flight compartment
is necessary to get access to the wiring affected by this service bulletin.
12. Group 6:
Get access to the P5-16 Cabin Altitude and Rate of Climb Panel in the flight compartment. Change
the W2508, W2510 and W5156 wire bundles between the P5 panel and the J46 Junction Box in
accordance with FIGURE 8, FIGURE 9 and FIGURE 10.
NOTE: The removal and reinstallation of the outboard raceway covers in the flight compartment
is necessary to get access to the wiring affected by this service bulletin.
13. Group 3:
Get access to the P5-16 Cabin Altitude and Rate of Climb Panel in the flight compartment. Change
the W2508 and W5156 wire bundles between the P5 panel and the TB602 and TB604 terminal
blocks in accordance with FIGURE 11 and FIGURE 12.
NOTE: The removal and reinstallation of the outboard raceway covers in the flight compartment
and the J46 box is necessary to get access to the wiring affected by this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
45 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 46

14. Group 1-2, 5-6:
Get access to the S1153 new second pressure switch in the forward electronics compartment. In
the flight compartment, get access to the AWM M315 electrical connectors. Change the W5503
and W5514 wire bundles in accordance with FIGURE 13, FIGURE 14 and FIGURE 15.
15. Group 3:
Get access to the S1153 new second pressure switch in the forward electronics compartment. In
the flight compartment, get access to the AWM M315 electrical connectors. Change the W5503
and W5514 wire bundles in accordance with FIGURE 16, FIGURE 17 and FIGURE 18.
16. Group 2, 6:
Change the W5156 wire bundle the TB501Y terminal block and the J46 Junction Box in accordance
with FIGURE 21.
17. Group 3:
Change the W5156 wire bundle between the TB501Y and the TB604Y terminal blocks in accordance
with FIGURE 22.
18. Group 4, 7:
Get access to the J46 Junction Box in the nose wheel well. Connect three capped and stowed
wires in accordance with FIGURE 19.
19. Close up all the panels that have been removed and put the Captain's and First Officer's seats
back in. Refer to 737-600/700/800/900 AMM 25-11-01 as an accepted procedure.
20. Supply electrical power to the airplane. Refer to 737-600/700/800/900 AMM 24-22-00 as an
accepted procedure.
21. Do the Aural Warning Module BITE Test and Landing Warning System Test. Refer to
737-600/700/800/900 AMM 31-51-00 as an accepted procedures.
22. Do the following steps to test the Aural Warning Circuit Breaker control prior to Takeoff Warning
System Test:
a. Make sure you did the Prepare for Takeoff Warning System Test. Refer to 737-600/700/800/900
AMM 31-51-00 as an accepted procedure.
b. Set the parking brakes. Make sure the intermittent warning horn comes on.
c. Open the circuit breaker C451. Make sure that the circuit breaker C129 is closed. Make sure
the intermittent warning horn goes off.
d. Close the circuit breaker C451. Make sure the intermittent warning horn comes on.
e. Release the parking brakes.
Do the Takeoff Warning System Test. Refer to 737-600/700/800/900 AMM 31-51-00 as an accepted
procedure.
23. Do the Mach Airspeed Warning System - Aural Warning Discrete Output Test. Refer to
737-600/700/800/900 AMM 34-16-00 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
46 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 47

24. Group 1-4:
For the Cabin Altitude Warning System, do the functional check that follows:
NOTE: The Part B: 10,000 ft Pressure Switch Set-point Check is applicable to both 737-21-1165
and 737-31A1332 service bulletins. If an operator incorporates 737-21-1165 and
737-31A1332 concurrently and this check is accomplished for one service bulletin, then
the requirement is met for the other service bulletin.
NOTE: There are two methods of simulating the pressure switch actuating. One is to pull a
vacuum on the switch and simulate the switch set point elevation. The other is to use a
jumper wire to short two pins of the pressure switch connector. It is acceptable to use
either method in the wiring check, but the vacuum must be used in the set point check.
The procedures below use the jumper method in the wiring check.
Part A: 10,000ft Warning Redundant Wiring Check.
a. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00170MACH WARN SYS-1P18-2/E3
C00396FIRE PROTECTION DETECTION MA
WRN & CONT
P6-2/A21
C00549MACH WARN SYSTEM-2P6-1/B7
b. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
c. Make sure the intermittent warning horn stays off and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels stay off.
d. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
e. Get access to the cabin altitude warning switch S128. Disconnect the connector D776 and
short Pins A and B of the connector D776 using a jumper wire.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
47 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 48

f. Get access to the Aural Warning Module M315. Disconnect the connector D1172 from the
Aural Warning Module M315.
g. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
h. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on.
i. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
j. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels go off.
k. Reconnect the connector D1172 to the Aural Warning Module M315. Disconnect the connector
D940 from the Aural Warning Module M315.
l. Ground pin 6 of the Aural Warning Module M315 to airplane structure.
m. Remove the jumper wire from the connector D776 on the cabin altitude warning switch S128.
Reconnect the connector D776.
n. Get access to the cabin altitude warning switch S1153. Disconnect the connector D14284
and short Pins A and B of the connector D14284 using a jumper wire.
o. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
p. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on.
q. Open the circuit breakers that follow:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
48 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 49

CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
r. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels go off.
s. Remove the jumper wire from the connector D14284 on the cabin altitude warning switch
S1153. Reconnect the connector D14284.
t. Install a jumper wire between pins “3" and “6" on the shipside connector D940 of the Aural
Warning Module M315.
u. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
v. Make sure the intermittent warning horn stays off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay off.
w. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
x. Remove the ground from pin 6 of the Aural Warning Module M315.
y. Remove the jumper wire from the connector D940 on the Aural Warning Module M315.
Reconnect the connector D940.
Part B: 10,000 ft Pressure Switch Set-point Check.
NOTE: This check is similar to the Cabin Altitude Warning Switch Functional Test that is given
in 737-600/700/800/900 AMM 21-33-00.
a. Close the circuit breakers that follow:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
49 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 50

CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
b. Remove the screen port assembly from the cabin altitude warning switch S128.
c. Install an adapter fitting on the S128 switch. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
NOTE: The adapter must be compatible with the MS33514-4 Style E female threads on the
cabin pressure switch.
d. Connect an air data test unit to the adapter fitting. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
e. Slowly decrease the vacuum pressure on the cabin altitude warning switch S128 and monitor
the altimeter.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
f. Make sure that the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on at a pressure altitude between 9,000 and 11,000
feet.
g. Press the ALT HORN CUTOUT switch on the P5-16 Cabin Pressure Control panel.
h. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay on.
(1) Select the DIM position on the LIGHTS switch located on the P1-3 Panel.
(2) Make sure that the red CABIN ALTITUDE indicators on the P1-3 and P3-1 panels dim.
(3) Select the BRT position on the LIGHTS switch located on the P1-3 Panel.
(4) Make sure that the red CABIN ALTITUDE indicators on the P1-3 and P3-1 panels are
bright.
i. Slowly increase the vacuum pressure on the cabin altitude warning switch S128 to 8,500 feet.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
j. Make sure the red CABIN ALTITUDE indicator lights the P1-3 and P3-1 panels go out.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
50 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 51

k. Slowly decrease the vacuum pressure on the cabin altitude warning switch S128 and monitor
the altimeter.
l. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on at a pressure altitude between 9,000 and 11,000
feet.
NOTE: Do not press the ALT HORN CUTOUT switch. The intermittent warning horn must
not be silenced in this step.
m. Slowly increase the vacuum pressure on the cabin altitude warning switch S128 to ambient.
n. Make sure the intermittent warning horn goes off and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels go off.
o. Remove the test equipment from the cabin altitude warning switch S128. Install the screen
port assembly.
p. Repeat steps (b) through (o) on the second cabin altitude warning switch S1153.
q. Put the airplane back to the pre-test condition.
25. Group 5-7:
For the airplanes with the high altitude landing configuration of the Cabin Altitude Warning System,
do the functional check that follows:
NOTE: The Part A: Lighting Check, Part C: 10,000 ft Pressure Switch Set-point Check and Part
D: High Altitude Pressure Switch Set-point and Wiring Check are applicable to both
737-21-1165 and 737-31A1332 service bulletins. If an operator incorporates 737-21-1165
and 737-31A1332 concurrently and these checks are accomplished for one service
bulletin, then the requirement is met for the other service bulletin.
NOTE: There are two methods of simulating the pressure switch actuating. One is to pull a
vacuum on the switch and simulate the switch set point elevation. The other is to use a
jumper wire to short two pins of the pressure switch connector. It is acceptable to use
either method in the wiring check, but the vacuum must be used in the set point check.
The procedures below use the jumper method in the wiring check.
Part A: Lighting Check
a. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C01277MASTER CAUTION ANNUNCIATOR
CONT 3
P6-3/C13
C00133INDICATOR MASTER DIM/TEST CONTP6-3/D11
C00310INDICATOR MASTER DIM BATP6-3/D12
C00311INDICATOR MASTER DIM BUS1P6-3/D13
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
51 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 52

CIRCUIT BREAKERNAMELOCATION/POSITION
C00313INDICATOR MASTER DIM BUS SECT
1
P6-3/E11
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
b. Set the LIGHTS Brt/Dim/Test switch located on the P1-3 panel to the TEST position.
c. Make sure the white ON and amber INOP lights on the P5-16 panel come on.
d. Make sure the red CABIN ALTITUDE lights on the P1-3 and P3-1 panels come on.
e. Set the LIGHTS Brt/Dim/Test switch located on the P1-3 panel to the BRT position.
f. Make sure the white ON and amber INOP lights on the P5-16 panel go off.
g. Make sure the red CABIN ALTITUDE lights on the P1-3 and P3-1 panels go off.
Part B: 10,000ft Warning Redundant Wiring Check.
a. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00170MACH WARN SYS-1P18-2/E3
C00396FIRE PROTECTION DETECTION MA
WRN & CONT
P6-2/A21
C00549MACH WARN SYSTEM-2P6-1/B7
b. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
c. Make sure the intermittent warning horn stays off and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels stay off.
d. Open the circuit breakers that follow:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
52 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 53

CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
e. Get access to the cabin altitude warning switch S128. Disconnect the connector D776 and
short Pins A and B of the connector D776 using a jumper wire.
f. Get access to the Aural Warning Module M315. Disconnect the connector D1172 from the
Aural Warning Module M315.
g. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
h. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on.
i. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
j. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels go off.
k. Reconnect the connector D1172 to the Aural Warning Module M315. Disconnect the connector
D940 from the Aural Warning Module M315.
l. Ground pin 6 of the Aural Warning Module M315 to airplane structure.
m. Remove the jumper wire from the connector D776 on the cabin altitude warning switch S128.
Reconnect the connector D776.
n. Get access to the cabin altitude warning switch S1153. Disconnect the connector D14284
and short Pins A and B of the connector D14284 using a jumper wire.
o. Close the circuit breakers that follow:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
53 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 54

CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
p. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on.
q. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
r. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels go off.
s. Remove the jumper wire from the connector D14284 on the cabin altitude warning switch
S1153. Reconnect the connector D14284.
t. Install a jumper wire between pins “3" and “6" on the shipside connector D940 of the Aural
Warning Module M315.
u. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
v. Make sure the intermittent warning horn stays off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay off.
w. Open the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
54 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 55

x. Remove the ground from pin 6 of the Aural Warning Module M315.
y. Remove the jumper wire from the connector D940 on the Aural Warning Module M315.
Reconnect the connector D940.
Part C: 10,000 ft Pressure Switch Set-point Check.
NOTE: This check is similar to the Cabin Altitude Warning Switch Functional Test that is given
in 737-600/700/800/900 AMM 21-33-00.
a. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
b. Remove the screen port assembly from the cabin altitude warning switch S128.
c. Install an adapter fitting on the S128 switch. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
NOTE: The adapter must be compatible with the MS33514-4 Style E female threads on the
cabin pressure switch.
d. Connect an air data test unit to the adapter fitting. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
e. Slowly decrease the vacuum pressure on the cabin altitude warning switch S128 and monitor
the altimeter.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
f. Make sure that the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on at a pressure altitude between 9,000 and 11,000
feet.
g. Press the ALT HORN CUTOUT switch on the P5-16 Cabin Pressure Control panel.
h. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay on.
(1) Select the DIM position on the LIGHTS switch located on the P1-3 Panel.
(2) Make sure that the red CABIN ALTITUDE indicators on the P1-3 and P3-1 panels dim.
(3) Select the BRT position on the LIGHTS switch located on the P1-3 Panel.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
55 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 56

(4) Make sure that the red CABIN ALTITUDE indicators on the P1-3 and P3-1 panels are
bright.
i. Slowly increase the vacuum pressure on the cabin altitude warning switch S128 to 8,500 feet.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
j. Make sure the red CABIN ALTITUDE indicator lights the P1-3 and P3-1 panels go out.
k. Slowly decrease the vacuum pressure on the cabin altitude warning switch S128 and monitor
the altimeter.
l. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on at a pressure altitude between 9,000 and 11,000
feet.
NOTE: Do not press the ALT HORN CUTOUT switch. The intermittent warning horn must
not be silenced in this step.
m. Slowly increase the vacuum pressure on the cabin altitude warning switch S128 to ambient.
n. Make sure the intermittent warning horn goes off and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels go off.
o. Remove the test equipment from the cabin altitude warning switch S128. Install the screen
port assembly.
p. Repeat steps (b) through (o) on the second cabin altitude warning switch S1153.
q. Put the airplane back to the pre-test condition.
Part D: High Altitude Pressure Switch Set-point and Wiring Check.
NOTE: This check is similar to the Cabin Altitude Warning Switch Functional Test that is given
in 737-600/700/800/900 AMM 21-33-00.
a. Close the circuit breakers that follow:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
C00451LANDING GEAR AURAL WARNP6-3/D18
C00314INDICATOR MASTER DIM SECT 2P6-3/E12
C00318INDICATOR MASTER DIM SECT 6P6-3/F12
b. Press the HIGH ALT LDG button on the P5-16 panel. Make sure the white ON light on the
P5-16 panel comes on and the amber INOP light on the P5-16 panel stays off.
c. Remove the screen port assembly from the cabin high altitude warning switch S1172.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
56 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 57

d. Install an adapter fitting on the S1172 switch. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
e. Connect an air data test unit to the adapter fitting. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
f. Slowly decrease the vacuum pressure on the cabin altitude warning switch S1172 and monitor
the altimeter.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
g. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on between a pressure altitude of A and B from the
table below.
CBAS1172 Switch part number
12,350 ft15,550 ft14,850 ft214C40-1-183
11,800 ft15,000 ft14,300 ft214C40-1-122
11,150 ft14,350 ft13,650 ft214C40-1-110
10,200 ft13,000 ft12,300 ft214C40-1-115
h. Press the ALT HORN CUTOUT switch on the P5-16 panel.
i. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay on.
j. Get access to the cabin altitude warning switch S128. Disconnect the connector D776 and
short Pins A and B of the connector D776 using a jumper wire.
k. Open the circuit breaker that follows:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
l. Make sure the amber INOP light on the P5-16 panel comes on and the MASTER CAUTION
indicator comes on.
m. Make sure the intermittent warning horn comes on. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay on.
n. Close the circuit breaker that follows:
CIRCUIT BREAKERNAMELOCATION/POSITION
C00129LANDING GEAR LATCH & PRESS
WARN
P6-3/B17
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
57 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 58

o. Make sure the amber INOP light on the P5-16 panel goes off and the white ON light stays on.
NOTE: Make sure the MASTER CAUTION indicator goes off.
p. Make sure the intermittent warning horn stays on. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay on.
NOTE: Do not press the ALT HORN CUTOUT switch. The intermittent warning horn must
not be silenced in this step.
q. Slowly increase the vacuum pressure on the cabin altitude warning switch S1172 to C feet
from the table above.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
r. Make sure the intermittent warning horn goes off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels go out.
s. Slowly increase the vacuum pressure on the cabin altitude warning switch S1172 to ambient.
t. Remove the test equipment from the cabin altitude warning switch S1172. Install the screen
port assembly.
u. Remove the jumper wire from the connector D776 on the cabin altitude warning switch S128.
Reconnect the connector D776.
v. Remove the screen port assembly from the cabin high altitude warning switch S128.
w. Install an adapter fitting on the S128 switch. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
x. Connect an air data test unit to the adapter fitting. Refer to 737-600/700/800/900 AMM 21-33-00
for test equipment requirements.
y. Slowly decrease the vacuum pressure on the cabin altitude warning switch S128 to 11,000ft.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
z. Make sure the intermittent warning horn stays off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay off.
aa. Press the HIGH ALT LDG button on the P5-16 panel. Make sure the white ON light on the
P5-16 panel goes off and the amber INOP light on the P5-16 panel stays off.
ab. Make sure the intermittent warning horn stays off. Make sure the red CABIN ALTITUDE
indicator lights on the P1-3 and P3-1 panels stay off.
ac. Slowly increase the vacuum pressure on the cabin altitude warning switch S128 to 8,500ft.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
58 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 59

ad. Slowly decrease the vacuum pressure on the cabin altitude warning switch S128 and monitor
the altimeter.
NOTE: Do not change the altitude at a rate more than 4,000 feet per minute (2.0 psi/minute
or 13.8 kPa/minute). Exceeding this rate can result in inaccurate measurement.
ae. Make sure the intermittent warning horn comes on and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels come on at a pressure altitude between 9,000 and 11,000
feet.
af. Slowly increase the vacuum pressure on the cabin altitude warning switch S128 to ambient.
ag. Make sure the intermittent warning horn goes off and the red CABIN ALTITUDE indicator
lights on the P1-3 and P3-1 panels go off.
ah. Remove the test equipment from the cabin altitude warning switch S128. Install the screen
port assembly.
ai. Put the airplane back to the pre-test condition.
26. Put the airplane back to a servicable condition.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: January 07, 2010
737-21-1165Revision 3: July 16, 2014
59 of 126
BOEING SERVICE BULLETIN 737-21-1165

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-21-1165
FLIGHT COMPARTMENT
FWD
ELECTRICAL
CONNECTOR
(2 LOCATIONS)
SCREW  X2 AURAL WARNING  MODULE M315
(4 LOCATIONS)
1702908
FIGURE 1: FLIGHT COMPARTMENT - AURAL WARNING MODULE - REPLACEMENT
(SHEET 1 OF 2)
Original Issue: January 07, 2010
Revision 3 July 16, 2014  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-21-1165
Work - See page 1 for details.  60 of 126

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-21-1165/file/3acae132cd05.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
