# Boeing Special Attention Service Bulletin 737-23-1302: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0987; AD 2013-01-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-23-1302](https://openairdocs.org/service-documents/boeing/sb-737-23-1302.md)
- Title as filed: Service Bulletin
- Pages: 116
- PDF: https://openairdocs.org/files/sha256/b6/d1/b6d1947331d231e0673aec924bd8813398b404bfa56e2933441ae032f1b5529f
- Page: https://openairdocs.org/service-documents/boeing/sb-737-23-1302/file/b6d1947331d2

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-23-1302
Original Issue: August 24, 2009
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment System - Audio Entertainment
Multiplexer Power Relay Wiring Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2009 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the Boeing livery are all
trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document
unless provided in writing by Boeing.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
1 of 116
3.0

### Page 2

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
2 of 116
BOEING SERVICE BULLETIN 737-23-1302
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 0
B. Concurrent Requirements ...................................... 1 0
C. Reason ................................................ 1 0
D. Description .............................................. 1 1
E. Compliance .............................................. 1 2
F. Approval ............................................... 1 2
G. Manpower .............................................. 1 2
H. Weight and Balance Changes .................................... 1 6
I. Electrical Load Data ......................................... 1 7
J. References .............................................. 1 8
1. Existing Data .......................................... 1 8
2. Data supplied with this Service Bulletin ............................ 1 8
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 8
K. Publications Affected ........................................ 1 8
L. Interchangeability and Intermixability of Parts ........................... 1 9
2. MATERIAL INFORMATION ........................................ 2 1
A. Material - Price and Availability ................................... 2 1
B. Industry Support Information .................................... 2 1
C. Parts Necessary For Each Airplane ................................. 2 1
1. Kits/Parts ............................................ 2 1
2. Parts and Materials Supplied by the Operator ........................ 2 1
3. Parts Modified and Reidentified ................................ 3 3
4. Parts Removed and Not Replaced .............................. 3 3
D. Parts Necessary to Change Spares ................................. 3 3
E. Special Tooling - Price and Availability ............................... 3 3
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 3
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 5
A. GENERAL INFORMATION ..................................... 3 5
B. WORK INSTRUCTIONS ....................................... 3 5
FIGURE 1: REMOVE AND KEEP RELAY R364 FROM THE E6-1 ELECTRONICS SHELF [Group 1] . 48
FIGURE 2: CHANGES TO WIRE BUNDLE W095 ON THE E6-1 ELECTRONICS SHELF [Group 1] . 50
FIGURE 3: INCREASE HOLE SIZE IN THE E2-1 ELECTRONICS SHELF [Group 1] .......... 5 2
FIGURE 4: WIRE ROUTING FOR WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF [Group 1]
.................................................. 5 4
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF [Group 1] . 55
FIGURE 6: WIRE ROUTING FOR WIRE BUNDLE W111 BETWEEN THE E2-1 ELECTRONICS SHELF
AND STA 227 [Group 1] .................................... 6 3
FIGURE 7: CHANGES TO WIRE BUNDLE W111 BETWEEN THE E2-1 ELECTRONICS SHELF AND STA
227 [Group 1] .......................................... 6 6
FIGURE 8: INSTALL RELAY R364 AT THE E2-1 ELECTRONICS SHELF [Group 1] .......... 6 9
FIGURE 9: WIRE ROUTING FOR WIRE BUNDLE W5031 ON THE E5-1 ELECTRONICS SHELF [Group
2-4] ............................................... 7 1
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
3 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 4

FIGURE 10: WIRE ROUTING FOR WIRE BUNDLE W5031 ON THE E5-1 ELECTRONICS SHELF [Group
5 ]  ................................................ 7 2
FIGURE 11: CHANGES TO WIRE BUNDLE W5031 ON THE E5-1 ELECTRONICS SHELF [Group 2-5] . 73
FIGURE 12: WIRE ROUTING FOR WIRE BUNDLE W111 BETWEEN THE E5-1 ELECTRONICS SHELF
AND STA 227 [Group 2, 5] ................................... 7 5
FIGURE 13: CHANGES TO WIRE BUNDLE W111 BETWEEN THE E5-1 ELECTRONICS SHELF AND STA
227 [Group 2-3, 5] ....................................... 7 8
FIGURE 14: WIRE ROUTING FOR WIRE BUNDLE W111 BETWEEN THE E5-1 ELECTRONICS SHELF
AND STA 227 [Group 3-4] ................................... 8 0
FIGURE 15: CHANGES TO WIRE BUNDLE W111 BETWEEN THE E5-1 ELECTRONICS SHELF AND STA
227 [Group 4] .......................................... 8 3
FIGURE 16: WIRE ROUTING FOR WIRE BUNDLE W005 ON THE E1-1 ELECTRONICS SHELF [Group 6]
.................................................. 8 5
FIGURE 17: CHANGES TO WIRE BUNDLE W005 ON THE E1-1 ELECTRONICS SHELF [Group 6] . 86
FIGURE 18: WIRE ROUTING FOR WIRE BUNDLE W103 BETWEEN THE E1-1 ELECTRONICS SHELF
AND STA 227 [Group 6] .................................... 8 8
FIGURE 19: CHANGES TO WIRE BUNDLE W103 BETWEEN THE E1-1 ELECTRONICS SHELF AND STA
227 [Group 6] .......................................... 9 0
FIGURE 20: WIRE ROUTING FOR WIRE BUNDLE W5031 ON THE E5-1 ELECTRONICS SHELF [Group
7-8] ............................................... 9 2
FIGURE 21: CHANGES TO WIRE BUNDLE W5031 ON THE E5-1 ELECTRONICS SHELF [Group 7] . 93
FIGURE 22: CHANGES TO WIRE BUNDLE W5031 ON THE E5-1 ELECTRONICS SHELF [Group 8] . 98
FIGURE 23: WIRE ROUTING FOR WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF [Group 9]
................................................. 1 0 3
FIGURE 24: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF [Group 9] . 104
FIGURE 25: WIRE ROUTING FOR WIRE BUNDLE W111 BETWEEN THE E2-1 ELECTRONICS SHELF
AND STA 227 [Group 10] ................................... 1 0 9
FIGURE 26: CHANGES TO WIRE BUNDLE W111 BETWEEN THE E2-1 ELECTRONICS SHELF AND STA
227 [Group 10] ........................................ 1 1 2
FIGURE 27: CIRCUIT BREAKER LOCATION AT THE P6-1 PANEL [Group 10] ............ 1 1 4
FIGURE 28: CHANGES TO WIRE BUNDLE W031 AT THE P6-1 PANEL [Group 10] ......... 1 1 5
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
4 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-23-1302Original Issue: August 24, 2009
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment System - Audio Entertainment
Multiplexer Power Relay Wiring Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin gives instructions to make changes to the In-Flight Entertainment (IFE) System. These
changes will remove the 115 volt power supply from the IFE system Seat Electronics Boxes (SEBs) when the
Entertainment Control Switch S857 at the P13 Attendant Panel on the Fwd Lavatory Wall is in the OFF position.
If you do not do the changes given in this service bulletin, the power supply cannot be removed from the SEBs
when the entertainment control switch is in the OFF position. This could cause a shock hazard to maintenance
personnel.
Boeing received a report from a 757 operator that the cabin crew noticed an electrical burning smell from the
seat track cover. An investigation found that there was an indication of heat damage to the wires that connect
the SEBs. This damage was caused by electrical arcing at a SEB terminator. 737 airplanes have a similar wiring
configuration to 757 airplanes.
Boeing reviewed the operator's investigation and found that the Entertainment Control Switch, S857, at the P13
Attendant Panel had no effect on the removal of electrical power from the SEBs. Accomplishment of this service
bulletin will let the Entertainment Control Switch S857 control the electrical power to the SEBs.
Boeing Service Related Problem (SRP) 737-SRP-23-0075 is related to this service bulletin.
Fleet Team Digest (FTD) 737 FTD 23-07001 is related to this service bulletin.
ACTION (PRR 35005-284RS)
Group 1:
Get access to the E6-1 electronics shelf and make changes to wire bundle W095 and remove and keep one
relay. Get access to the Main Equipment Center and make changes to wire bundles W015 and W111. At the
E2-1 electronics shelf relay bracket, increase the relay hole size and install the kept relay. Do a test to make
sure the 115 volt power supply is removed from the passenger seats.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
5 of 116

### Page 6

Group 2-5:
Get access to the Main Equipment Center and make changes to wire bundles W111 and W5031. Do a test to
make sure the 115 volt power supply is removed from the passenger seats.
Group 6:
Get access to the Main Equipment Center and make changes to wire bundles W005 and W103. Do a test to
make sure the 115 volt power supply is removed from the passenger seats.
Group 7-8:
Get access to the Main Equipment Center and make changes to wire bundle W5031. Do a test to make sure
the 115 volt power supply is removed from the passenger seats.
Group 9:
Get access to the Main Equipment Center and make changes to wire bundle W015. Do a test to make sure the
115 volts power supply is removed from the passenger seats.
Group 10:
Get access to the Main Equipment Center and make changes to wire bundle W111. In the Flight Compartment
at the P6 panel make changes to wire bundle W031.
EFFECTIVITY
737-300/-400/-500 Airplanes. Refer to Paragraph 1.A., Effectivity, Airplanes for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 24 months after the date on
this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the given in this service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
6 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 7 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
• E6-1 ELECTRONICS SHELF:
- CHANGE WIRE BUNDLE W095
AND REMOVE ONE RELAY
(GROUP 1)
P6 PANEL:  MAIN EQUIPMENT CENTER:
- CHANGE WIRE BUNDLE  - CHANGE WIRE BUNDLES W015 AMD W111
W031 (GROUP 10)  - CHANGE WIRE BUNDLES W5031 AND W111  AND INSTALL ONE RELAY (GROUP 1)
(GROUP 2-5)
- CHANGE WIRE BUNDLES W005 AND W103
(GROUP 6)
- CHANGE WIRE BUNDLE W5031 (GROUP 7-8)
- CHANGE WIRE BUNDLE W015 (GROUP 9)
- CHANGE WIRE BUNDLE W111 (GROUP 10)  1580170
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  7 of 116

### Page 8

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
8 of 116
BOEING SERVICE BULLETIN 737-23-1302
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-23-1302
Original Issue: August 24, 2009
ATA System: 2334
SUBJECT: COMMUNICATIONS - Passenger Entertainment System - Audio Entertainment
Multiplexer Power Relay Wiring Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 35005-284RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
737-300/-400/-500 airplanes with different wire configurations-1
737-300/-400/-500 airplanes with different wire configurations-2
737-300/-400/-500 airplanes with different wire configurations-3
737-300/-400/-500 airplanes with different wire configurations-4
737-300/-400/-500 airplanes with different wire configurations-5
737-300/-400/-500 airplanes with different wire configurations-6
737-300/-400/-500 airplanes with different wire configurations-7
737-300/-400/-500 airplanes with different wire configurations-8
737-300/-400/-500 airplanes with different wire configurations-9
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
9 of 116

### Page 10

DESCRIPTIONCONFIGURATIONGROUP
737-300/-400/-500 airplanes with different wire configurations-10
Airplane Models:
737-300, 737-400, 737-500
GroupVariable Number
7PJ551 - PJ561
9PS896 - PS897
1PT001 - PT004
2PT005 - PT015
1PT021 - PT024
3PT025 - PT031
10PT671 - PT672
5PV351
8PW201 - PW207
7PW208 - PW230
6PW266
1PW571 - PW574
3PW575 - PW576
4PW711 - PW717
10PW741 - PW742
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin gives instructions to make changes to the In-Flight Entertainment (IFE) System.
These changes will remove the 115 volt power supply from the IFE system Seat Electronics Boxes
(SEBs) when the Entertainment Control Switch S857 at the P13 Fwd Attendant Panel on the Fwd
Lavatory Wall is in the OFF position. If you do not do the changes given in this service bulletin, the
power supply cannot be removed from the SEBs when the entertainment control switch is in the OFF
position. This could cause a shock hazard to maintenance personnel.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
10 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 11

Boeing received a report from a 757 operator that the cabin crew noticed an electrical burning smell
from the seat track cover. An investigation found that there was an indication of heat damage to the
wires that connect the SEBs. This damage was caused by electrical arcing at a SEB terminator. 737
airplanes have a similar wiring configuration to 757 airplanes.
Boeing reviewed the operator's investigation and found that the Entertainment Control Switch S857 at
the P13 Attendant Panel had no effect on the removal of electrical power from the SEBs. Accomplishment
of this service bulletin will let the Entertainment Control Switch S857 control the electrical power to the
SEBs.
Boeing Service Related Problem (SRP) 737-SRP-23-0075 is related to this service bulletin.
Fleet Team Digest (FTD) 737 FTD 23-07001 is related to this service bulletin.
D. Description
Group 1:
Get access to the E6-1 electronics shelf and make changes to wire bundle W095 and remove and
keep one relay. Get access to the Main Equipment Center and make changes to wire bundles W015
and W111. At the E2-1 electronics shelf relay bracket, increase the relay hole size and install the kept
relay. Do a test to make sure the 115 volt power supply is removed from the passenger seats.
Group 2-5:
Get access to the Main Equipment Center and make changes to wire bundles W111 and W5031. Do
a test to make sure the 115 volt power supply is removed from the passenger seats.
Group 6:
Get access to the Main Equipment Center and make changes to wire bundles W005 and W103. Do a
test to make sure the 115 volt power supply is removed from the passenger seats.
Group 7-8:
Get access to the Main Equipment Center and make changes to wire bundle W5031. Do a test to make
sure the 115 volt power supply is removed from the passenger seats.
Group 9:
Get access to the Main Equipment Center and make changes to wire bundle W015. Do a test to make
sure the 115 volts power supply is removed from the passenger seats.
Group 10:
Get access to the Main Equipment Center and make changes to wire bundle W111. In the Flight
Compartment at the P6 panel make changes to wire bundle W031.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1, 3, 10:
Affected Maintenance Zones
ZoneModel
102, 205737-400, 737-500
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
11 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 12

Group 2:
Affected Maintenance Zones
ZoneModel
102, 205737-500
Group 4-8:
Affected Maintenance Zones
ZoneModel
102, 205737-400
Group 9:
Affected Maintenance Zones
ZoneModel
102, 205737-300
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 24 months after the
date on this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
12 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 13

 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Elapsed HoursTask HoursNumber of Per-
sons
Task
3.503.501Open Access
0.250.251FIGURE 1
0.600.601FIGURE 2
0.750.751FIGURE 3
6.1512.302FIGURE 4 and FIG-
URE 5
2.955.902FIGURE 6 and FIG-
URE 7
0.250.251FIGURE 8
3.253.251Close Access
1.801.801Test
19.5028.60TOTAL FOR EACH AIRPLANE
Group 2:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.951.951Open Access
1.801.801FIGURE 9 and FIG-
URE 11
3.456.902FIGURE 12 and
FIGURE 13
1.701.701Close Access
1.451.451Test
10.3513.80TOTAL FOR EACH AIRPLANE
Group 3:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.951.951Open Access
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
13 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 14

Group 3:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.801.801FIGURE 9 and FIG-
URE 11
3.456.902FIGURE 13 and
FIGURE 14
1.701.701Close Access
1.451.451Test
10.3513.80TOTAL FOR EACH AIRPLANE
Group 4:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.951.951Open Access
1.801.801FIGURE 9 and FIG-
URE 11
3.456.902FIGURE 14 and
FIGURE 15
1.701.701Close Access
1.451.451Test
10.3513.80TOTAL FOR EACH AIRPLANE
Group 5:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.951.951Open Access
1.801.801FIGURE 10 and
FIGURE 11
3.456.902FIGURE 12 and
FIGURE 13
1.701.701Close Access
1.451.451Test
10.3513.80TOTAL FOR EACH AIRPLANE
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
14 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 15

Group 6:
Elapsed HoursTask HoursNumber of Per-
sons
Task
3.153.151Open Access
1.801.801FIGURE 16 and
FIGURE 17
2.054.102FIGURE 18 and
FIGURE 19
2.902.901Close Access
1.451.451Test
11.3513.40TOTAL FOR EACH AIRPLANE
Group 7:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.951.951Open Access
4.609.202FIGURE 20 and
FIGURE 21
1.701.701Close Access
2.502.501Test
10.7515.35TOTAL FOR EACH AIRPLANE
Group 8:
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.951.951Open Access
4.609.202FIGURE 20 and
FIGURE 22
1.701.701Close Access
2.502.501Test
10.7515.35TOTAL FOR EACH AIRPLANE
Group 9:
Elapsed HoursTask HoursNumber of Per-
sons
Task
2.302.301Open Access
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
15 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 16

Group 9:
Elapsed HoursTask HoursNumber of Per-
sons
Task
4.609.202FIGURE 23 and
FIGURE 24
2.052.051Close Access
2.502.501Test
11.4516.05TOTAL FOR EACH AIRPLANE
Group 10:
Elapsed HoursTask HoursNumber of Per-
sons
Task
2.302.301Open Access
3.456.902FIGURE 25 and
FIGURE 26
0.200.201FIGURE 27 and
FIGURE 28
2.052.051Close Access
0.050.051Test
8.0511.50TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Group 1:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+229.0+1.0737-400
+355.0+1.0737-500
Group 2:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+312.0+1.0737-500
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
16 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 17

Group 3:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+186.0+1.0737-400
+312.0+1.0737-500
Group 4-5:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+186.0+1.0737-400
Group 6:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+82.0+0.5737-400
Group 7-8:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+93.0+0.5737-400
Group 9:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+151.0+0.5737-300
Group 10:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+229.0+1.0737-400
+355.0+1.0737-500
I. Electrical Load Data
Not changed.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
17 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 18

J. References
1. Existing Data
a. Engineering Change Memo PRR 35005-284RS
b. Boeing Service Related Problem (SRP) 737-SRP-23-0075
c. Standard Overhaul Practices Manual (SOPM) 20-50-05
d. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19, 20-20-11, 20-30-11,
20-30-12, 20-30-16, 20-30-22, 20-60-00, 20-60-06, 20-60-08, 20-60-09, 20-61-11, 20-61-12,
20-71-11, 20-71-14, 20-81-12, 20-81-19, 20-81-22, 20-90-11, null
e. 737 Fleet Team Digest (FTD) 23-07001
f. 737-300/400/500 Aircraft Maintenance Manual (AMM) 12-31-21, 20-40-12, 20-60-06, 23-34-00,
24-22-00, 25-21-46
g. 737-300/400/500 Wiring Diagram Manual (WDM) 23-31-01, 23-31-02, 23-31-04, 23-31-06,
23-34-01, 23-34-02
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
WIRE BUNDLE E2-1 ELECTRONICS SHELF ASSY OF61-30015
WIRE BUNDLE E5-1 ELECTRONIC SHELF ASSY OF61-35031
WIRE BUNDLE INSTALLATION SECT 53/56 FWD CARGO
COMPARTMENT
65-48331
WIRE BUNDLE INSTL SECT. 51/53 ELECTRONIC EQPT. BAY
STA 259.5 - 380
65-48335
SHELF ASSY-ELEC/ELEX RACK, 2-165-53804
E1-1 ELECTRONIC SHELF69-36803
WIRE BUNDLE E6-1 ELECTRONIC SHELF ASSY OF69-36834
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
Chapter-SectionPublication
23-31, 23-34737 Wiring Diagram Manual
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
18 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 19

Chapter-SectionPublication
23-34737 Illustrated Parts Catalog
23-31, 23-34737 System Schematic Manual
1. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
19 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 20

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
20 of 116
BOEING SERVICE BULLETIN 737-23-1302
BLANK PAGE

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-6-5-4-3-2-1
WIRE KIT - IFE
AUDIO SHUT OFF
- WIRE BUNDLES
W015, W095,
W111, & W739
.....-61-74491-1
WIRE KIT - IFE
AUDIO SHUT OFF
- WIRE BUNDLES
W111 & W5031
....-.61-74491-2
WIRE KIT - IFE
AUDIO SHUT OFF
- WIRE BUNDLES
W005 & W103
...-..61-74491-3
WIRE KIT - IFE
AUDIO SHUT OFF
- WIRE BUNDLE
W5031
..-...61-74491-4
WIRE KIT - IFE
AUDIO SHUT OFF
- WIRE BUNDLE
W015
.-....61-74491-5
WIRE KIT - IFE
AUDIO SHUT OFF
- WIRE BUNDLES
W031 & W111
-.....61-74491-6
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
21 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 22

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-6-5-4-3-2-1
ASSY - W015,
W739
.....161-74491-101
(a)RELAY I.D. LABEL
- R00364
.....161-74491-10112
ASSY - W095.....161-74491-102
ASSY - W111.....161-74491-103
ASSY - W5031....1.61-74491-104
ASSY - W111....1.61-74491-105
ASSY - W005...1..61-74491-106
ASSY - W103...1..61-74491-107
ASSY - W5031..1...61-74491-108
ASSY - W015.1....61-74491-109
ASSY - W0311.....61-74491-110
ASSY - W1111.....61-74491-111
(b) (i)LACING TAPE -
WHITE
.....161-74491-2001
(m) (n)ADHESIVE TAPE
- 0.5 IN
.1.11161-74491-2002
(h) (j)THERMOFIT
SLEEVE - 0.093 IN
I.D.
.....161-74491-2003
(c) (i)LACING TAPE -
YELLOW
.....161-74491-2004
(d) (i)LACING TAPE -
WHITE
...11.61-74491-2005
(e) (i)LACING TAPE -
YELLOW
1..11.61-74491-2006
(f) (i)LACING TAPE -
WHITE
.11...61-74491-2007
(h)THERMOFIT
SLEEVE - 0.093 IN
I.D.
.11...61-74491-2008
(k)THERMOFIT
SLEEVE - 0.125 IN
I.D.
.11...61-74491-2009
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
22 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 23

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-6-5-4-3-2-1
(l)THERMOFIT
SLEEVE - 0.375 IN
I.D.
.1....61-74491-2010
(g) (i)LACING TAPE -
WHITE
1.....61-74491-2011
(o) (p)THREAD LOCK
COMPOUND
.1.11165C38639-115
(a) Made from BACT19J4.
(b) BMS 13-54, Type 3, Class 1, Color White. Length, 2400 inches.
(c) BMS 13-54, Type 3, Class 1, Color Yellow. Length, 840 inches.
(d) BMS 13-54, Type 3, Class 1, Color White. Length, 720 inches.
(e) BMS 13-54, Type 3, Class 1, Color Yellow. Length, 600 inches.
(f) BMS 13-54, Type 3, Class 1, Color White. Length, 1440 inches.
(g) BMS 13-54, Type 3, Class 1, Color White. Length, 660 inches.
(h) Insulation Sleeving, Heat Shrinkable, Polyolefin, Flexible, X-Linked. Made from M23053/5-103-4.
(i) Gudebrod Inc (V82110), 274 Shoemaker Road, Pottstown, PA 19494.
(j) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707 Seattle, WA 98124-2499.
(k) Insulation Sleeving, Heat Shrinkable, Polyolefin, Flexible, X-Linked. Made from M23053/5-104-4.
(l) Insulation Sleeving, Heat Shrinkable, Polyolefin, Flexible, X-Linked. Made from M23053/5-107-4.
(m) Use Permacel P421.
(n) Permacel (V99742), 7201-108TH Street, Pleasant Prairie, WI 53158-2912
(o) Use Loctite 222.
(p) Loctite Corp. (V0A083), 3255 Harvester Road, Kansas City, KS 66115
Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-106-105-104-103-102-101
ASSY - W015,
W739
.....-61-74491-101
ASSY - W095....-.61-74491-102
ASSY - W111...-..61-74491-103
ASSY - W5031..-...61-74491-104
ASSY - W111.-....61-74491-105
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
23 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 24

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-106-105-104-103-102-101
ASSY - W005-.....61-74491-106
(a)CONTACT.....2031-9174-003
(a)CONTACT.3.2..318-2016-035
(a) (f)SPLICE, PARAL-
LEL, SOLISTRAND
.....534137
(a) (g)CONTACT, ELEC-
TRICAL
3.3..248-100-5012P-02
(31A-2016-035 op-
tional)
ASSY - W015,
W739
.....-61-74491-101
(b)CONNECTOR I.D.
TAPE - D04459P
.....161-74491-10101
(c)SPLICE I.D.
SLEEVE - SM55
.....161-74491-10102
(c)SPLICE I.D.
SLEEVE - SM279
.....161-74491-10103
(c)SPLICE I.D.
SLEEVE - SM281
.....161-74491-10104
(b)CONNECTOR I.D.
TAPE - D04145P
.....161-74491-10105
(b)CONNECTOR I.D.
TAPE - D00121
.....161-74491-10106
(b)CONNECTOR I.D.
TAPE - D00147
.....161-74491-10107
(b)CONNECTOR I.D.
TAPE - D02375
.....161-74491-10108
(c)SPLICE I.D.
SLEEVE - SM283
.....161-74491-10109
(b)CONNECTOR I.D.
TAPE - D04319P
.....161-74491-10110
(b)CONNECTOR I.D.
TAPE - D02387
1.1..161-74491-10111
WIRE LIST.....161-74491-101W
WIRE, 60 INCHES,
IDENTIFIED AS
W015-038-22
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
22
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
24 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 25

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-106-105-104-103-102-101
WIRE, 60 INCHES,
IDENTIFIED AS
W015-054-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-086-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-508-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8623-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8624-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8629-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8630-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8631-20
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8625-16
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8626-16
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8627-16
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8628-16
.....1BMS 13-48, TYPE
10, CLASS 1, AWG
16
ASSY - W095....-.61-74491-102
(c)SPLICE I.D.
SLEEVE - SM7
.1.11.61-74491-10201
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
25 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 26

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-106-105-104-103-102-101
(b)CONNECTOR I.D.
TAPE - D08461P
....1.61-74491-10202
ASSY - W111...-..61-74491-103
(c)SPLICE I.D.
SLEEVE - SP3979
.1.1..61-74491-10301
(c)SPLICE I.D.
SLEEVE - SM5
...1..61-74491-10302
(c)SPLICE I.D.
SLEEVE - SP3887
...1..61-74491-10303
(b)CONNECTOR I.D.
TAPE - D04319J
...1..61-74491-10304
WIRE LIST...1..61-74491-103W
WIRE, 120 INCH-
ES, IDENTIFIED
AS W111-059-16
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 120 INCH-
ES, IDENTIFIED
AS W111-060-16
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 360 INCH-
ES, IDENTIFIED
AS W111-061-16
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 360 INCH-
ES, IDENTIFIED
AS W111-062-16
...1..BMS 13-48, TYPE
10, CLASS 1, AWG
16
ASSY - W5031..-...61-74491-104
(b)CONNECTOR I.D.
TAPE - D08621J
..1...61-74491-10401
WIRE LIST..1...61-74491-104W
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-8001-16
..1...BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-8002-16
..1...BMS 13-48, TYPE
10, CLASS 1, AWG
16
ASSY - W111.-....61-74491-105
(b)CONNECTOR I.D.
TAPE - D08621P
.1....61-74491-10501
WIRE LIST.1....61-74491-105W
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
26 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 27

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-106-105-104-103-102-101
WIRE, 360 INCH-
ES, IDENTIFIED
AS W111-061-16
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 360 INCH-
ES, IDENTIFIED
AS W111-062-16
.1....BMS 13-48, TYPE
10, CLASS 1, AWG
16
ASSY - W005-.....61-74491-106
(b)CONNECTOR I.D.
TAPE - D04179P
1.....61-74491-10601
WIRE LIST1.....61-74491-106W
WIRE, 60 INCHES,
IDENTIFIED AS
W005-8201-16
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 60 INCHES,
IDENTIFIED AS
W005-8202-16
1.....BMS 13-48, TYPE
10, CLASS 1, AWG
16
(a) (e)CONTACT, PIN....22BACC47CN1S
(a) (e)CONTACT.....5BACC47CN2S
(a) (e)CONTACT, SOCK-
ET
...2..BACC47CP1S
(a) (e)CONTACT, SOCK-
ET, SIZE 16
...4..BACC47CP2S
(a) (e)CONTACT, PIN.....3BACC47DE7A
(a) (e)CONTACT, SOCK-
ET
.....3BACC47DJ1
(a) (e)CONTACT, SOCK-
ET
3.3..5BACC47DJ2
(a) (e)CONTACT, SOCK-
ET
.....2BACC47ER1
(a) (e)SELF-LOCKING
NUT
.....3BACN10YR04C
(e)RELAY SOCKET.....1BACS16X1A
(a) (d)SPLICE.3.5..D-436-37
(a) (d)SLEEVE, SEAL-
ING, SPLICE
.....5D-436-46
(a) (d)WIRE SPLICE
SLEEVE
....2.D-436-58
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
27 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 28

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-106-105-104-103-102-101
(a) (e)PLUG.....3MS27488-16-1
(a) (e)PLUG....33MS27488-20-1
(a) (e)SCREW.....3MS51957-25
(a) (e)WASHER.....3NAS1676C6
(a) There are more parts than are necessary.
(b) Made from BACT19C-T (BACT19CT).
(c) Made from BMS13-69D044B.
(d) Tyco Electronics/Raychem DBA (V06090), Raychem Div. Electronics, 300 Constitution Drive, Menlo Park,
CA 94025-1164.
(e) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707 Seattle, WA 98124-2499.
(f) Tyco Electronics Corporation (V00779), 2800 Fulling Mill Road, BLDG-38, Middletown, PA 10757-3142.
(g) Amphenol Corp Spectra-Strip/ITD (V02660), 40-60 Delaware Ave, Sidney, NY 13838-1395.
Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-111-110-109-108-107
ASSY - W103....-61-74491-107
ASSY - W5031...-.61-74491-108
ASSY - W015..-..61-74491-109
ASSY - W031.-...61-74491-110
ASSY - W111-....61-74491-111
(a)CONTACT..22.031-9134-004
(a)CONTACT....3318-2016-035
(a) (f)SPLICE, PARAL-
LEL, SOLISTRAND
..22.34137
(a) (f)SPLICE..22.34138
(b)CONNECTOR I.D.
TAPE - D04319P
..1..61-74491-10110
(b)CONNECTOR I.D.
TAPE - D02387
...1.61-74491-10111
(c)SPLICE I.D.
SLEEVE - SM7
1....61-74491-10201
(c)SPLICE I.D.
SLEEVE - SP3979
1...161-74491-10301
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
28 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 29

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-111-110-109-108-107
(b)CONNECTOR I.D.
TAPE - D04319J
1....61-74491-10304
(b)CONNECTOR I.D.
TAPE - D08621J
...1.61-74491-10401
ASSY - W103....-61-74491-107
(c)SPLICE I.D.
SLEEVE - SP3984
....161-74491-10701
(b)CONNECTOR I.D.
TAPE - D04179J
....161-74491-10702
WIRE LIST....161-74491-107W
WIRE, 192 INCH-
ES, IDENTIFIED
AS W103-051-16
....1BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 192 INCH-
ES, IDENTIFIED
AS W103-052-16
....1BMS 13-48, TYPE
10, CLASS 1, AWG
16
ASSY - W5031...-.61-74491-108
(c)SPLICE I.D.
SLEEVE - SM2
...1.61-74491-10801
(c)SPLICE I.D.
SLEEVE - SM4
...1.61-74491-10802
(b)CONNECTOR I.D.
TAPE - D08767J
...1.61-74491-10803
(b)CONNECTOR I.D.
TAPE - D08615J
...1.61-74491-10804
(b)CONNECTOR I.D.
TAPE - D02391
...1.61-74491-10805
(b)CONNECTOR I.D.
TAPE - D02391C
...1.61-74491-10806
(b)CONNECTOR I.D.
TAPE - D02355
...1.61-74491-10807
(b)CONNECTOR I.D.
TAPE - D08617J
...1.61-74491-10808
(b)CONNECTOR I.D.
TAPE - D03259
...1.61-74491-10809
(b)CONNECTOR I.D.
TAPE - D03259C
...1.61-74491-10810
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
29 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 30

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-111-110-109-108-107
WIRE LIST...1.61-74491-108W
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-001-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-002-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-004-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-022-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-023-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-026-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-027-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-028-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W5031-029-20
...1.BMS 13-48, TYPE
10, CLASS 1, AWG
20
ASSY - W015..-..61-74491-109
(b)CONNECTOR I.D.
TAPE - D02387
..1..61-74491-10901
(c)SPLICE I.D.
SLEEVE - SM79
..1..61-74491-10902
(c)SPLICE I.D.
SLEEVE - SM80
..1..61-74491-10903
(b)CONNECTOR I.D.
TAPE - D08875P
..1..61-74491-10904
(b)CONNECTOR I.D.
TAPE - D08513P
..1..61-74491-10905
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
30 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 31

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-111-110-109-108-107
(b)CONNECTOR I.D.
TAPE - D02391
..1..61-74491-10906
(b)CONNECTOR I.D.
TAPE - D02391C
..1..61-74491-10907
(b)CONNECTOR I.D.
TAPE - D02355
..1..61-74491-10908
(b)CONNECTOR I.D.
TAPE - D08515P
..1..61-74491-10909
WIRE LIST..1..61-74491-109W
WIRE, 60 INCHES,
IDENTIFIED AS
W015-153-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-165-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-174-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-177-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-184-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-191-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-192-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8426-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
WIRE, 60 INCHES,
IDENTIFIED AS
W015-8435-20
..1..BMS 13-48, TYPE
10, CLASS 1, AWG
20
ASSY - W031.-...61-74491-110
ASSY - W111-....61-74491-111
WIRE LIST1....61-74491-111W
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
31 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 32

Kit 61-74491
NotesExisting Part
Number
NameQTYNew Part Number
-111-110-109-108-107
WIRE, 360 INCH-
ES, IDENTIFIED
AS W111-061-16
1....BMS 13-48, TYPE
10, CLASS 1, AWG
16
WIRE, 360 INCH-
ES, IDENTIFIED
AS W111-062-16
1....BMS 13-48, TYPE
10, CLASS 1, AWG
16
(a) (e)CONTACT, PIN..23.BACC47CN1S
(a) (e)CONTACT..2..BACC47CN2S
(a) (e)CONTACT, SOCK-
ET
..44.BACC47CP1S
(a) (e)CONTACT, SOCK-
ET, SIZE 16
3....BACC47CP2S
(a) (e)CONTACT, PIN...6.BACC47DE7A
(a) (e)CONTACT, SOCK-
ET
..55.BACC47DJ1
(a) (e)CONTACT, SOCK-
ET
..22.BACC47EG4
(a) (e)TERMINAL, LUG..3..BACT12AC8
(a) (e)SLEEVE, HEAT
SHRINK
.3...BACT63D1
(a) (e)SLEEVE, HEAT
SHRINK
.3...BACT63D2
(a) (d)SPLICE3...3D-436-37
(a) (d)SLEEVE, SEAL-
ING, SPLICE
..33.D-436-46
(a) (e)EYELET..22.Y-9015-C (CE66FC
optional)
(a) There are more parts than are necessary.
(b) Made from BACT19C-T (BACT19CT).
(c) Made from BMS13-69D044B.
(d) Tyco Electronics/Raychem DBA (V06090), Raychem Div. Electronics, 300 Constitution Drive,
Menlo Park, CA 94025-1164.
(e) The Boeing Company (V81205), 7755 E Marginal Way, P.O. Box 3707 Seattle, WA 98124-2299.
(f) Tyco Electronics Corporation (V00779), 2200 Fulling Mill Road, BLDG-38 Middletown, PA 10757-
3142.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
32 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 33

3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
33 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 34

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
34 of 116
BOEING SERVICE BULLETIN 737-23-1302
BLANK PAGE

### Page 35

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions and the Figure(s)
give the recommended sequence of steps. The sequence of steps to do this service
bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
B. WORK INSTRUCTIONS
1. Group 1:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove the E2-1 and E6-1 electronics shelves.
(1) Remove and keep the Line Replacement Units (LRU)s from the E2-1 and E6-1 electronics
shelves. Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect brackets AE0201A and AE0601A for
the E2-1 and E6-1 electronics shelves. Refer to SWPM 20-60-06 as an accepted
procedure.
(3) Remove and keep the E2-1 electronics shelf from the E2 electronics rack.
(4) Remove and keep the E6-1 electronics shelf from the E6 electronics rack.
d. At the E6-1 electronics shelf, remove the relay and decal in accordance with FIGURE 1.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
35 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 36

e. Make changes to wire bundle W095 on the E6-1 electronics shelf in accordance with FIGURE
2.
f. At the E2-1 electronics shelf, increase the size of the opening for the relay R364 in accordance
with FIGURE 3.
g. Make changes to wire bundle W015 on the E2-1 electronics shelf in accordance with FIGURE
4 and FIGURE 5.
h. Make changes to wire bundle W111 between the E2-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 6 and FIGURE 7.
i. If removed, install the kept E2-1 and E6-1 electronics shelves.
(1) Install the kept E2-1 electronics shelf at the E2 electronics rack.
(2) Install the kept E6-1 electronics shelf at the E6 electronics rack.
(3) Connect electrical connectors at disconnect brackets AE201A and AE601A for the E2-1
and E6-1 electronics shelves. Refer to SWPM 20-60-06 as an accepted procedure.
(4) Install the kept LRUs at the E2-1 and E6-1 electronics shelves. Refer to 737-300/400/500
AMM 20-40-12 as an accepted procedure.
j. Do a continuity check of the changed and newly installed wires.
k. Install relay R364 at the E2-1 electronics shelf in accordance with FIGURE 8.
l. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
m. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Get access to the Power/RF Combiner Splitter M1482 in the overhead stowage bin at
STA 678.
(3) Disconnect connector D2741, make sure that there is zero volts between pin 5 and pin
3 of the connector.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
36 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 37

(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 5 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Connect connector D2741 to the Power/RF Combiner Splitter M1482.
n. Do the operational test for the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
o. Put the airplane back to a serviceable condition.
2. Group 2:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove the E5-1 electronics shelf.
(1) Remove and keep the Line Replacement Units (LRU)s from the E5-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Remove and keep the E5-1 electronics shelf from the E5 electronics rack.
d. Make changes to wire bundle W5031 on the E5-1 electronics shelf in accordance with FIGURE
9 and FIGURE 11.
e. Make changes to wire bundle W111 between the E5-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 12 and FIGURE 13.
f. If removed, install the kept E5-1 electronics shelf.
(1) Install the kept E5-1 electronics shelf at the E5 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E5-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
g. Do a continuity check of the changed and newly installed wires.
h. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
i. Do the test that follows for the Audio Entertainment Switch S857:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
37 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 38

(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Get access to the Power/RF Combiner Splitter M1482 in the overhead stowage bin at
STA 678.
(3) Disconnect connector D2741, make sure that there is zero volts between pin 5 and pin
3 of the connector.
(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 5 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Connect connector D2741 to the Power/RF Combiner Splitter M1482.
j. Do the operational test for the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
k. Put the airplane back to a serviceable condition.
3. Group 3:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove and keep the E5-1 electronics shelf.
(1) Remove and keep the Line Replacement Units (LRU)s from the E5-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Remove and keep the E5-1 electronics shelf from the E5 electronics rack.
d. Make changes to wire bundle W5031 on the E5-1 electronics shelf in accordance with FIGURE
9 and FIGURE 11.
e. Make changes to wire bundle W111 between the E5-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 13 and FIGURE 14.
f. If removed, install the kept E5-1 electronics shelf.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
38 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 39

(1) Install the kept E5-1 electronics shelf at the E5 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E5-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
g. Do a continuity check of the changed and newly installed wires.
h. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
i. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Get access to the Power/RF Combiner Splitter M1482 in the overhead stowage bin at
STA 678.
(3) Disconnect connector D2741, make sure that there is zero volts between pin 5 and pin
3 of the connector.
(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 5 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Connect connector D2741 to the Power/RF Combiner Splitter M1482.
j. Do the operational test for the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
k. Put the airplane back to a serviceable condition.
4. Group 4:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove and keep the E5-1 electronics shelf.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
39 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 40

(1) Remove and keep the Line Replacement Units (LRU)s from the E5-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Remove and keep the E5-1 electronics shelf from the E5 electronics rack.
d. Make changes to wire bundle W5031 on the E5-1 electronics shelf in accordance with FIGURE
9 and FIGURE 11.
e. Make changes to wire bundle W111 between the E5-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 14 and FIGURE 15.
f. If removed, install the kept E5-1 electronics shelf.
(1) Install the kept E5-1 electronics shelf at the E5 electronics shelf.
(2) Connect electrical connectors at disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E5-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
g. Do a continuity check of the changed and newly installed wires.
h. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
i. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Get access to the Power/RF Combiner Splitter M1482 in the overhead stowage bin at
STA 678.
(3) Disconnect connector D2741, make sure that there is zero volts between pin 5 and pin
3 of the connector.
(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 5 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Connect connector D2741 to the Power/RF Combiner Splitter M1482.
j. Do the operational test of the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
k. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
40 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 41

5. Group 5:
Do the steps that follow
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove and keep the E5-1 electronics shelf.
(1) Remove and keep the Line Replacement Units (LRU)s from the E5-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Remove and keep the E5-1 electronics shelf from the E5 electronics rack.
d. Make changes to wire bundle W5031 on the E5-1 electronics shelf in accordance with FIGURE
10 and FIGURE 11.
e. Make changes to wire bundle W111 between the E5-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 12 and FIGURE 13.
f. If removed, install the kept E5-1 electronics shelf.
(1) Install the kept E5-1 electronics shelf at the E5 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to 737-300/400/500 AMM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E5-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
g. Do a continuity check of the changed and newly installed wires.
h. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
i. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Get access to the Power/RF Combiner Splitter M1482 in the overhead stowage bin at
STA 678.
(3) Disconnect connector D2741, make sure that there is zero volts between pin 5 and pin
3 of the connector.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
41 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 42

(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 5 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Connect connector D2741 to the Power/RF Combiner Splitter M1482.
j. Do the operational test for the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
k. Put the airplane back to a serviceable condition.
6. Group 6:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove and keep the E1-1 electronics shelf.
(1) Remove and keep the Line Replacement Units (LRU)s from the E1-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect bracket AE0101B for the E1-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Remove and keep the E1-1 electronics shelf from the E1 electronics rack.
d. Disconnect electrical connectors from disconnect bracket AE0101B for the E1-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
e. Make changes to wire bundle W005 on the E1-1 electronics shelf in accordance with FIGURE
16 and FIGURE 17.
f. Make changes to wire bundle W103 between the E1-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 18 and FIGURE 19.
g. If removed, install the kept E1-1 electronics shelf.
(1) Install the kept E1-1 electronics shelf at the E1 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0101B for the E1-1 electronics
shelf. Refer to SWPM 20-60-06 as accepted procedure.
(3) Install the kept LRUs at the E1-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
h. Do a continuity check of the changed and newly installed wires.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
42 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 43

i. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
j. Do the test that follows for the Audio Entertainment Switch S857.
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Get access to the Power/RF Combiner Splitter M1482 in the overhead stowage bin at
STA 678.
(3) Disconnect connector D2741, make sure that there is zero volts between pin 5 and pin
3 of the connector.
(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 5 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Connect connector D2741 to the Power/RF Combiner Splitter M1482.
k. Do the operational test for the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
l. Put the airplane back to a serviceable condition.
7. Group 7:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove and keep the E5-1 electronics shelf.
(1) Disconnect electrical connectors from disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(2) Remove and keep the Line Replacement Units (LRU)s from the E5-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(3) Remove and keep the E5-1 electronics shelf from the E5 electronics rack.
d. Make changes to wire bundle W5031 on the E5-1 electronics shelf in accordance with FIGURE
20 and FIGURE 21.
e. If removed, install the kept E5-1 electronics shelf.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
43 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 44

(1) Install the kept E5-1 electronics shelf at the E5 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E5-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
f. Do a continuity check of the changed and newly installed wires.
g. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
h. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Remove and keep the left and right sidewall panels at STA 660. Refer to 737-300/400/500
AMM 25-21-46 as an accepted procedure.
(3) At sidewall connectors D3189 and D3197, make sure there is zero volts between pin 1
and pin 3.
(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 1 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Install the kept the left and right sidewall panels at STA 660. Refer to 737-300/400/500
AMM 25-21-46 as an accepted procedure.
i. Do the operational test for the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
j. Put the airplane back to a serviceable condition.
8. Group 8:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary remove and keep the E5-1 electronics shelf.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
44 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 45

(1) Remove and keep the Line Replacement Units (LRU)s from the E5-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(2) Disconnect electrical connectors from disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Remove and keep the E5-1 electronics shelf from the E5 rack.
d. Make changes to wire bundle W5031 on the E5-1 electronics shelf in accordance with FIGURE
20 and FIGURE 22.
e. If removed, install the kept E5-1 electronics shelf.
(1) Install the kept E5-1 electronics shelf at the E5 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0501A for the E5-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E5-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
f. Do a continuity check of the changed and newly installed wires.
g. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
h. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Remove and keep the left and right sidewall panels at STA 660. Refer to 737-300/400/500
AMM 25-21-46 as an accepted procedure.
(3) At sidewall connectors D3189 and D3197, make sure there is zero volts between pin 1
and pin 3.
(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 1 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Install the kept the left and right sidewall panels at STA 660. Refer to 737-300/400/500
AMM 25-21-46 as an accepted procedure.
i. Do the operational test of the Passenger Entertainment System. Refer to 737-300/400/500
AMM 23-34-00 as an accepted procedure.
j. Put the airplane back to a serviceable condition.
9. Group 9:
Do the steps that follow:
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
45 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 46

a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. If necessary, remove and keep the E2-1 electronics shelf.
(1) Disconnect electrical connectors from disconnect bracket AE0201A for the E2-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(2) Remove and keep the Line Replacement Units (LRU)s from the E2-1 electronics shelf.
Refer to 737-300/400/500 AMM 20-40-12 as an accepted procedure.
(3) Remove and keep theE2-1 electronics shelf from the E2 electronics rack.
d. Make changes to wire bundle W015 on the E2-1 electronics shelf in accordance with FIGURE
23 and FIGURE 24.
e. If removed, install the kept E2-1 electronics shelf.
(1) Install the kept E2-1 electronics shelf at the E2 electronics rack.
(2) Connect electrical connectors at disconnect bracket AE0201A for the E2-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
(3) Install the kept LRUs at the E2-1 electronics shelf. Refer to 737-300/400/500 AMM
20-40-12 as an accepted procedure.
f. Do a continuity check of the changed and newly installed wires.
g. Supply electrical power to the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
h. Do the test that follows for the Audio Entertainment Switch S857:
(1) Make sure that the Audio Entertainment Switch S857 at the P13 Forward Attendant Panel
is in the OFF position.
(2) Remove and keep the left and right sidewall panels at STA 500B. Refer to 737-300/400/500
AMM 25-21-46 as an accepted procedure.
(3) At sidewall connectors D10143 and D10145, make sure there is zero volts between pin
1 and pin 3.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
46 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 47

(4) Put the Audio Entertainment Switch S857 to the ON position, make sure there is 115
volts between pin 1 and pin 3.
(5) Put the Audio Entertainment Switch S857 to the OFF position.
(6) Install the kept the left and right sidewall panels at STA 500B. Refer to 737-300/400/500
AMM 25-21-46 as an accepted procedure.
i. Do the operational test for Passenger Entertainment System. Refer to 737-300/400/500 AMM
23-34-00 as an accepted procedure.
j. Put the airplane back to a serviceable condition.
10. Group 10:
Do the steps that follow:
a. Remove electrical power from the airplane. Refer to 737-300/400/500 AMM 24-22-00 as an
accepted procedure.
b. Open the main electronics compartment door. Refer to 737-300/400/500 AMM 12-31-21 as
an accepted procedure.
c. Disconnect electrical connectors from disconnect bracket AE0201A for the E2-1 electronics
shelf. Refer to SWPM 20-60-06 as an accepted procedure.
d. In the main electronics compartment, remove and keep the Line Replacement Units (LRU)s
from the E2-1 electronics shelf. Refer to 737-300/400/500 AMM 20-40-12 as an accepted
procedure.
e. If necessary remove and keep the E2-1 electronics shelf.
f. Make changes to wire bundle W111 between the E2-1 electronics shelf and the splice area
at STA 227 in accordance with FIGURE 25 and FIGURE 26.
g. If removed, install the kept E2-1 electronics shelf at the E2 electronics rack.
h. Connect electrical connectors at disconnect bracket AE0201A for the E2-1 electronics shelf.
Refer to SWPM 20-60-06 as an accepted procedure.
i. Do a continuity check of the changed and newly installed wires.
j. Install the kept LRUs at the E2-1 electronics shelf. Refer to 737-300/400/500 AMM 20-40-12
as an accepted procedure.
k. Make changes to wire bundle W031 at the P6 panel in accordance with FIGURE 27 and
FIGURE 28.
l. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
47 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 48 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
This Figure applies only to: Group 1.
RELAY
R364
) LABEL
E6-1 ELECTRONICS SHELF  1580161
FIGURE 1: REMOVE AND KEEP RELAY R364 FROM THE E6-1 ELECTRONICS SHELF
(SHEET 1 OF 2)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  48 of 116

### Page 49

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to SWPM 20-
81-22 as an accept-
ed procedure. (a)
1BACR13C42ABRelayRemove / Keep1
Refer to SOPM 20-
50-05 as an accept-
ed procedure.
1-LabelRemove2
(a) Keep for installation at the E2-1 electronics shelf.
FIGURE 1: REMOVE AND KEEP RELAY R364 FROM THE E6-1 ELECTRONICS SHELF
(SHEET 2 OF 2)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
49 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
This Figure applies only to: Group 1.
W095
• 008-22
D2735
001-22
D8457J
AE0601A
POS 03  NC
АЗ
A1
SM7  A2
ВЗ
NC  B1
B2
2  71004-221  Х1
7/002-22H  X2
D2387
R364 POWER RELAY MUX
→ 003-22 +
T1006F
- 006-22 +
005-22  =А
AE0601A  D8461J  P  D2739
POS 01
E6-1 SHELF  • ADDED WIRE OR NEW ROUTING
+A DELETED WIRE OR FORMER ROUTING  1580163
EXISTING WIRE
FIGURE 2: CHANGES TO WIRE BUNDLE W095 ON THE E6-1 ELECTRONICS SHELF
(SHEET 1 OF 2)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  50 of 116

### Page 51

REFERENCE: 737-300/400/500 WDM 23-34-01
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
1D-436-58WIRE SPLICE SLEEVE1
Refer to SWPM 20-10-11 as an
accepted procedure.
-61-74491-2001LACING TAPE - WHITE
161-74491-10201SPLICE I.D. SLEEVE - SM72
Refer to SWPM 20-81-12 as an
accepted procedure. (a)
1BACS16X1SOCKET3
Refer to SWPM 20-61-11 as an
accepted procedure.
1BACC47CN1SCONTACT, PIN4
Refer to SWPM 20-60-09 as an
accepted procedure. (b)
-61-74491-2002ADHESIVE TAPE - 0.5 IN5
Refer to SWPM 20-10-11 as an
accepted procedure.
-61-74491-2001LACING TAPE - WHITE
Refer to SWPM 20-60-09 as an
accepted procedure. (c)
-65C38639-115THREAD LOCK COM-
POUND
6
Install within 6 inches of equip-
ment. (d)
161-74491-10202CONNECTOR I.D. TAPE -
D08461P
7
Refer to SWPM 20-60-08 and
SWPM 20-61-11 as accepted pro-
cedures. (e)
2MS27488-20-1PLUG8
Refer to SWPM 20-90-11 as an
accepted procedure. (f)
1YHLZD-33TERMINAL BLOCK DIODE
ASSEMBLY MODULE
9
Refer to SWPM 20-10-11 as an
accepted procedure. (g)
-61-74491-2001LACING TAPE - WHITE
(a) Remove relay socket D2387 from the E6-1 electronics shelf.
(b) Wrap around wire bundle adjacent to leg of backshell and tie with lacing tape.
(c) Apply to backshell and connector.
(d) Replace the connector identification tape as necessary.
(e) Install seal plugs into connector pin locations that are vacant.
(f) Remove the terminal block and keep for installation on the E2-1 electronics shelf. Move the end clamp
and/or spacer into the space where the terminal block was located.
(g) Use lacing tape to tie wire bundles after deleting wires.
FIGURE 2: CHANGES TO WIRE BUNDLE W095 ON THE E6-1 ELECTRONICS SHELF
(SHEET 2 OF 2)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
51 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
This Figure applies only to: Group 1.
E2-1 ELECTRONICS
SHELF
- 1.40
+0.70
0.14
-0.13  0.13
0.30  (2 PLACES)
0.60  - CL
0.57  - 0.06 R (TYP)
CL
1.14
A-A  1580164
E2-1 ELECTRONICS SHELF
FIGURE 3: INCREASE HOLE SIZE IN THE E2-1 ELECTRONICS SHELF
(SHEET 1 OF 2)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  52 of 116

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure .
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
169-60032-16BRACKET ASSY -
SUPPORT, RELAY
Cut1
FIGURE 3: INCREASE HOLE SIZE IN THE E2-1 ELECTRONICS SHELF
(SHEET 2 OF 2)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
53 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 54 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
This Figure applies only to: Group 1.
- D121
GDX-1
D4459P
• D2387
D4319P
D4145P
W015
SPLICE
AREA
T1002
D2375
E2-1 ELECTRONICS SHELF  1580165
FIGURE 4: WIRE ROUTING FOR WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 1 OF 1)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  54 of 116

### Page 55 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
This Figure applies only to: Group 1.
W739-001-20
W739-002-20  2
D8461J  P
AE0601A
POS 01
E6-1 SHELF
W015
+ 054-20 +
8630-20
10
D4459J
AE0201A
POS 21
SM55
26  055-20-  SM281
25  053-20-  SM279
D4149J  P
AE0201A
POS 02
E2-1 ELECTRONICS SHELF
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 1 OF 8)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  55 of 116

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
W015
507-22
509-22
1086-20+
- 086-20  SM55
D4145J
AE201A
POS 18
12  13
· 508-20 -
508-20
D121 (BP)  15  [16
M63  PASSENGER
ADDRESS
AMPLIFIER
→ 038-22 +
• 038-22 19
D2375 17  18
R361  VIDEO SYSTEM
RELAY NO.1
SM283
20  8631-20 1
E2-1 ELECTRONICS SHELF  1580166
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 2 OF 8)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  56 of 116

### Page 57 (OCR)

BOEING SERVICE BULLETIN 737-23-1302
W015
12>21>22>
> 10
А5  →  C5  - 8624-20-  SM281
T1002F
8623-20-  SM279
SM55
(2 LOCATIONS) 27
8629-20
23  054-20-  Х1
7  8628-16 25
4  8627-16 25
NC  ВЗ
10  8626-16 25  A2
8  8625-16 25  A1
D4319J  P  24  NC  АЗ
AE0201A
POS 19
D2387
R364 _ POWER RELAY MUX
26  29
30  31  32
E2-1 ELECTRONICS SHELF  1580162
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 3 OF 8)
Original Issue: August 24, 2009
737-23-1302
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.  57 of 116

### Page 58

REFERENCE: 737-300/400/500 WDM 23-31-01, 737-300/400/500 WDM 23-31-02, 737-300/400/500 WDM
23-31-04, 737-300/400/500 WDM 23-31-06, 737-300/400/500 WDM 23-34-01
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
(a)-61-74491-101WWIRE LIST1
Refer to SWPM 20-10-11 as an
accepted procedure.
-61-74491-2001LACING TAPE - WHITE
Refer to SWPM 20-61-11 as an
accepted procedure.
1BACC47CN1SCONTACT, PIN2
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 4 OF 8)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
58 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 59

MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
Install within 6 inches of equip-
ment. (b)
161-74491-10101CONNECTOR I.D. TAPE -
D04459P
3
Refer to SWPM 20-60-09 as an
accepted procedure. (c)
-61-74491-2002ADHESIVE TAPE - 0.5 IN4
Refer to SWPM 20-10-11 as an
accepted procedure.
-61-74491-2001LACING TAPE - WHITE
Refer to SWPM 20-60-09 as an
accepted procedure. (d)
-65C38639-115THREAD LOCK COM-
POUND
5
Refer to SWPM 20-60-08 and
SWPM 20-61-11 as accepted pro-
cedures. (e)
2MS27488-20-1PLUG6
Refer to SWPM 20-30-12 as an
accepted procedure.
3D-436-46SLEEVE, SEALING,
SPLICE
7
Refer to SWPM 20-30-12 as an
accepted procedure.
334137SPLICE, PARALLEL,
SOLISTRAND
161-74491-10102SPLICE I.D. SLEEVE -
SM55
8
161-74491-10103SPLICE I.D. SLEEVE -
SM279
9
161-74491-10104SPLICE I.D. SLEEVE -
SM281
10
Refer to SWPM 20-61-11 as an
accepted procedure.
3BACC47CN2SCONTACT11
Use to build up outer diameter of
wire.
161-74491-2003THERMOFIT SLEEVE -
0.093 IN I.D.
12
Install within 6 inches of equip-
ment. (b)
161-74491-10105CONNECTOR I.D. TAPE -
D04145P
13
Install within 6 inches of equip-
ment. (b)
161-74491-10106CONNECTOR I.D. TAPE -
D00121
14
Refer to SWPM 20-71-11 as an
accepted procedure.
1031-9174-003CONTACT15
Install within 6 inches of equip-
ment. (f)
161-74491-10107CONNECTOR I.D. TAPE -
D00147
16
Install within 6 inches of equip-
ment. (a)
161-74491-10108CONNECTOR I.D. TAPE -
D02375
17
Refer to SWPM 20-81-19 as an
accepted procedure.
1BACC47ER1CONTACT, SOCKET18
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 5 OF 8)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
59 of 116
BOEING SERVICE BULLETIN 737-23-1302

### Page 60

MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
-61-74491-101WWIRE LIST19
161-74491-10109SPLICE I.D. SLEEVE -
SM283
20
Refer to SWPM 20-90-11 as an
accepted procedure. (h)
1YHLZD-33TERMINAL BLOCK DIODE
ASSEMBLY MODULE
21
Refer to SWPM 20-90-11 as an
accepted procedure.
2BACC47DE7ACONTACT, PIN22
Install within 6 inches of equip-
ment. (b)
161-74491-10110CONNECTOR I.D. TAPE -
D04319P
23
Refer to SWPM 20-61-11 as an
accepted procedure.
148-100-5012P-02 (31A-
2016-035 optional)
CONTACT, ELECTRICAL24
-61-74491-101WWIRE LIST25
Refer to SWPM 20-81-12 as an
accepted procedure.
1BACS16X1ARELAY SOCKET26
Refer to SWPM 20-81-12 as an
accepted procedure.
2BACC47DJ1CONTACT, SOCKET27
Refer to SWPM 20-81-12 as an
accepted procedure.
4BACC47DJ2CONTACT, SOCKET28
Refer to SWPM 20-60-08 and
SWPM 20-81-12 as accepted pro-
cedures.
2MS27488-16-1PLUG29
Install within 6 inches of equip-
ment. (b)
161-74491-10111CONNECTOR I.D. TAPE -
D02387
30
Refer to SWPM 20-81-22 as an
accepted procedure.
2MS51957-25SCREW31
Refer to SWPM 20-81-22 as an
accepted procedure.
2NAS1676C6WASHER
Refer to SWPM 20-81-22 as an
accepted procedure.
2BACN10YR04CSELF-LOCKING NUT
Refer to SOPM 20-50-05 as an
accepted procedure.
161-74491-10112RELAY I.D. LABEL -
R00364
32
(a) Re-route existing wires if there is sufficient length.
(b) Replace connector ID tape as necessary.
(c) Wrap around wire bundle adjacent to the leg of the backshell and tie with lacing tape.
(d) Install backshell to the connector.
(e) Install seal plugs into connector pin locations that are vacant.
FIGURE 5: CHANGES TO WIRE BUNDLE W015 ON THE E2-1 ELECTRONICS SHELF
(SHEET 6 OF 8)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: August 24, 2009
737-23-1302
60 of 116
BOEING SERVICE BULLETIN 737-23-1302

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-23-1302/file/b6d1947331d2.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
