# Boeing Special Attention Service Bulletin 737-25-1641: U.S. DOT/FAA - Service Bulletin

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0183; AD 2013-02-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-25-1641](https://openairdocs.org/service-documents/boeing/sb-737-25-1641.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 206
- PDF: https://openairdocs.org/files/sha256/41/92/4192147bd5cb28fe32e8c5de48746e19b83c6b7ad8310070a9cd40db85d86703
- Page: https://openairdocs.org/service-documents/boeing/sb-737-25-1641/file/4192147bd5cb

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-25-1641
Original Issue: May 13, 2011
Revision 2: November 20, 2012
ATA System: 2524
SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments -
Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2011 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner™,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and Boeing
liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection
with this document unless provided in writing by Boeing. BOEING is a trademark of Boeing Management
Company.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
1 of 206
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
2 of 206
BOEING SERVICE BULLETIN 737-25-1641
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 9
B. Concurrent Requirements ...................................... 1 9
C. Reason ................................................ 1 9
D. Description .............................................. 2 0
E. Compliance .............................................. 2 1
F. Approval ............................................... 2 2
G. Manpower .............................................. 2 2
H. Weight and Balance Changes .................................... 2 5
I. Electrical Load Data ......................................... 2 6
J. References .............................................. 2 6
1. Existing Data: ......................................... 2 6
2. Data Supplied with this Service Bulletin: ........................... 2 7
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 7
K. Publications Affected ........................................ 2 7
L. Interchangeability and Intermixability of Parts ........................... 2 8
M. Software Accomplishment Summary ................................ 2 8
2. MATERIAL INFORMATION ........................................ 2 9
A. Material - Price and Availability ................................... 2 9
B. Industry Support Information .................................... 3 1
C. Parts Necessary for Each Airplane ................................. 3 1
1. Kits/Parts ............................................ 3 1
2. Parts and Materials Supplied by the Operator ........................ 3 5
3. Parts Modified and Reidentified ................................ 3 6
4. Parts Removed and Not Replaced .............................. 3 7
D. Parts Necessary to Change Spares ................................. 3 8
E. Special Tooling - Price and Availability ............................... 3 8
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 8
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9
A. GENERAL INFORMATION ..................................... 3 9
B. WORK INSTRUCTIONS ....................................... 4 0
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS
- CHANGE ........................................... 4 4
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS
- CHANGE ........................................... 5 5
FIGURE 3: PASSENGER CABIN - MID 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS - CHANGE
.................................................. 6 6
FIGURE 4: PASSENGER CABIN - MID 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS - CHANGE
.................................................. 7 7
FIGURE 5: PASSENGER CABIN - AFT CENTER OVERHEAD STOWAGE BOX, FIBERGLASS - CHANGE
.................................................. 8 8
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
3 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 4

FIGURE 6: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, CARBON -
CHANGE ........................................... 1 0 3
FIGURE 7: PASSENGER CABIN - MID 1 CENTER OVERHEAD STOWAGE BOX, CARBON - CHANGE
................................................. 1 1 4
FIGURE 8: PASSENGER CABIN - MID 2 CENTER OVERHEAD STOWAGE BOX, CARBON - CHANGE
................................................. 1 2 5
APPENDIX A: BOEING PRODUCT STANDARD BAC5583, REV G., PROCESS FOR POTTING INSERTS
AND EDGES INTO SANDWICH PANELS .......................... 1 3 6
APPENDIX B: AS DELIVERED AIRPLANE CENTER OVERHEAD STOWAGE BOX LOCATIONS . . . 137
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
4 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-25-1641Original Issue: May 13, 2011
Revision 2: November 20, 2012
ATA System: 2524
SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments -
Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Airplanes YB581-YB589 were added to Group 2 and airplanes YB851-YB859 were deleted from Group 2 of this
service bulletin effectivity. Added reference to Federal Aviation Administration (FAA) Notice of Proposed Rule
Making 2011-NM-131-AD.
No more work is necessary on the airplane(s) changed in accordance with the original issue or Revision 1 of
this service bulletin. The parts can only be installed in the correct orientation and location. The right stiffener
can only be installed on the right side and the left stiffener can only be installed on the left side of the airplane,
improper installation is prevented by the surrounding structures.
REASON FOR REVISION
Revision 2 of this service bulletin is sent to make the changes to the service bulletin as shown below:
1. Summary, Compliance: Changed to refer to Paragraph 1.E.Compliance, for compliance information.
2. Part 1.A., Effectivity: Added airplanes YB581-YB589 to Group 2 and deleted airplanes YB851-YB859
from Group 2.
3. Part 1.E., Compliance: Added reference to Federal Aviation Administration (FAA) Notice of Proposed
Rule Making 2011-NM-131-AD.
4. Part 1.J., References: Added reference to 2011-NM-131-AD.
5. Part 1 M., Software Accomplishment Summary: Added "not affected".
6. Part 2. A., Material Information, Price and Availability: Added footnote (c) to show ROLT as of Revision
2 of this Service Bulletin.
7. Part 2. C. 1., Kits/Parts: Changed footnote (a) for kit 002A0002-241 to show SRM Chapter 51.
8. Part 2.C.3., Parts Modified and Reidentified: Changed 412A4100-250A to 412A4110-250A.
9. Part 3.B., Work Instructions:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
5 of 206

### Page 6

– Identified stiffener part numbers for left and right sides as follows:
– Figure1, Steps 1 and 4, left side - 412A4160-58, Steps 8 and 11, right side - 412A4160 -57.
– Figure 2, Steps 1 and 4, left side - 412A4160-66, Steps 8 and 11, right side - 412A4160-65.
– Figure 3, Steps 1 and 4, left side - 412A4160-58, Steps 8 and 11, right side - 412A4160-57.
– Figure 4, Steps 1 and 4, left side - 412A4160-58, Steps 8 and 11, right side - 412A4160 -57.
– Figure 6, Steps 1 and 4, left side - 412A4160-68, Steps 8 and 11, right side - 412A4160-67.
– Figure 7, Steps 1 and 4, left side - 412A4160-68, Steps 8 and 11, right side - 412A4160-67.
– Figure 8, Steps 1 and 4, left side - 412A4160-68, Steps 8 and 11, right side - 412A4160-67.
– Figure 3 and 4, Added note that graphics are representative only and represent more than
one configuration.
10. Added Appendix B.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
May 13, 2011Original Issue:
August 08, 2011Revision 1:
November 20, 2012Revision 2:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
6 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 7

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-25-1641Original Issue: May 13, 2011
Revision 2: November 20, 2012
ATA System: 2524
SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments -
Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
Refer to Paragraph 1.B., Concurrent Requirements.
BACKGROUND
The current design of the 737NG Center Overhead Stowage (COS) boxes do not meet the 9G Forward Load
Requirement. The COS boxes that have been delivered need to be changed into a design that meets the 9G
requirement. If this service bulletin is not accomplished, injury to passengers and flight personnel could occur
as a result of being struck by falling objects.
During an emergency landing condition the Center Overhead Stowage, (COS) box attachments must satisfactorily
go through a 9G forward acceleration at the maximum weight load to agree with FAR 25.561 specifications.
During an emergency landing, this condition could cause the center overhead stowage box compartments to
fall from their supports. The changes given in this service bulletin will provide the full 9G forward force resistance
for all Center Overhead Stowage boxes.
Boeing Service Related Problem (SRP) 737-SRP-25-0294 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737NG FTD 25-10004 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane YL113 by Service
Bulletin 737-25-1641 Original Issue. The change completed on airplane YL113 by Service Bulletin Original Issue
is equivalent to the release of Revision 1 of this service bulletin. Airplane YL113 has the configuration of a Group
1 airplane.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedYesSpares Affected
Paragraph 1.E., ComplianceYesAD Related
Paragraph 1.H., Weight and Balance ChangesNoWeight and Balance Change
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
7 of 206

### Page 8

ReferenceAffectedPlanning Data
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedYesPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected (Flight Crew
Operations Manual and/or FAA Approved Air-
plane Flight Manual)
Paragraph 2.C.1., Kits/PartsNoKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
NoOperator Supplied Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
NoSpecial Tooling Required
ACTION (PRR 38275-169S)
For each Center Overhead Stowage box location, remove the Center Overhead Stowage box and accomplish
the specified changes and reinstall the Center Overhead Stowage box.
NOTE: For Group 1 Airplanes: This service bulletin is applicable to Group 1 airplanes with one or more center
overhead stowage boxes with liferaft provisions installed prior to delivery.
For Group 2 Airplanes: This service bulletin is applicable only to Group 2 airplanes if the changes given
in Service Bulletin 737-25-1585 with Master change 2528MK3691, 2528MK3712 were made.
For Group 3 Airplanes: This service bulletin is applicable only to Group 3 airplanes if the changes given
in Service Bulletin 737-25-1586 with Master change 2528MK3692 were made.
For Group 4 Airplanes: This service bulletin is applicable only to Group 4 airplanes if the changes given
in Service Bulletin 737-25-1433 with Master change 2528MK3375 were made.
For Group 5 Airplanes: This service bulletin is applicable only to Group 5 airplanes if the changes given
in Service Bulletin 737-25-1628 with Master change 2528MK3728 were made.
EFFECTIVITY
737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER Airplanes. Refer to Paragraph 1.A.1., Airplanes,
for the list of affected airplane(s).
COMPLIANCE
Refer to Paragraph 1.E., Compliance, for compliance information.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of February 15, 2010. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Refer to Paragraph 1.G., Manpower.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
8 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 9 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
MATERIAL INFORMATION
Boeing Supplied Kits/Parts/ and Operator Supplied Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
REMOVE, MODIFY AND INSTALL THE CENTER
OVERHEAD STOWAGE BOX. PERFORM MODIFICATION
OF THE CENTER OVERHEAD STOWAGE BOX TO INSTALL
REINFORCEMENT HARDWARE AT EACH CORNER, RIGHT
AND LEFT, AT THE 9G TIE ROD ATTACHMENT.
2032139
Original Issue: May 13, 2011
Revision 2: November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  9 of 206

### Page 10

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
10 of 206
BOEING SERVICE BULLETIN 737-25-1641
BLANK PAGE

### Page 11

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-25-1641
Original Issue: May 13, 2011
Revision 2: November 20, 2012
ATA System: 2524
SUBJECT: EQUIPMENT / FURNISHINGS - Passenger Cabin Partitions And Compartments -
Center Overhead Stowage Box with Liferaft Provisions - 9G Tie Rod Attachment Change
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 38275-169S for data about this change.
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-600/700/700C/800/900/900ER Airplanes with one or more center
overhead stowage boxes installed at Boeing prior to delivery
-1
737-700 Airplanes that have been changed as described in Master
Change 2528MK3691, 2528MK3712
-2
737-900 Airplanes that have been changed as described in Master
Change 2528MK3692
-3
737-800 Airplanes that have been changed as described in Master
Change 2528MK3375
-4
737-700 Airplanes that have been changed as described in Master
Change 2528MK3728
-5
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
11 of 206

### Page 12

GroupVariable Number
1YA271 - YA272
1YA291
1YA336 - YA345
1YA351
1YA356 - YA357
1YA366 - YA367
1YA501 - YA536
1YA627 - YA631
1YA635 - YA636
1YA641 - YA642
1YA666 - YA667
1YA681 - YA691
1YA731 - YA734
1YA811 - YA814
1YA881 - YA882
1YA891 - YA892
1YA961 - YA978
1YB156 - YB158
1YB161 - YB164
1YB201 - YB208
1YB271
1YB301 - YB310
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB580
2YB581 - YB589
2YB592
2YB594 - YB598
1YB630 - YB635
1YB656
1YB671 - YB672
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
12 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 13

GroupVariable Number
1YB881 - YB893
1YB911
1YB961 - YB974
1YB986 - YB988
1YC001 - YC030
1YC051 - YC084
1YC091 - YC095
1YC101 - YC104
1YC113
1YC121
1YC136 - YC141
1YC146 - YC147
1YC151 - YC156
1YC166 - YC171
1YC176 - YC179
1YC321 - YC380
1YC383 - YC387
1YC391 - YC394
1YC409 - YC415
1YC437 - YC439
1YC501 - YC524
1YC526
1YC571 - YC582
1YC587 - YC589
1YC591 - YC593
1YC601 - YC655
1YC681 - YC696
1YC701 - YC715
1YC720 - YC725
1YC727 - YC730
1YC742 - YC750
1YC781 - YC793
1YC801 - YC892
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
13 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 14

GroupVariable Number
1YC903 - YC907
1YC921 - YC922
1YC931 - YC932
1YC941 - YC945
1YC974 - YC976
1YD001 - YD007
4YD023 - YD024
1YD101 - YD113
1YD151 - YD159
1YD201 - YD203
1YD206 - YD209
1YD216 - YD219
1YD251 - YD254
1YD301 - YD334
1YD391
1YD481 - YD485
1YD491 - YD499
1YD531 - YD535
1YD571 - YD572
3YD601 - YD612
1YD651 - YD652
1YE301 - YE305
1YE371 - YE379
1YF001 - YF011
1YF029 - YF033
1YF051 - YF065
1YF086
1YF111 - YF114
1YF116 - YF119
1YF121 - YF128
1YF176 - YF178
1YF191 - YF192
1YF201 - YF276
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
14 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 15

GroupVariable Number
1YF441 - YF442
1YF801 - YF803
1YF831 - YF832
1YF836 - YF838
1YF901 - YF905
1YF921 - YF927
5YG044
5YG067
5YG069
1YG101 - YG104
1YG251 - YG252
1YG501 - YG511
1YG701
1YG711
1YH101 - YH132
1YH201 - YH202
1YH206 - YH207
1YH321 - YH322
1YJ001
1YJ003 - YJ013
1YJ471 - YJ480
1YJ501 - YJ517
1YJ531 - YJ579
1YJ591 - YJ599
1YJ671 - YJ694
1YJ861 - YJ867
1YJ871 - YJ880
1YJ901 - YJ904
1YJ908 - YJ929
1YJ931 - YJ932
1YJ935 - YJ937
1YJ942 - YJ943
1YJ945
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
15 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 16

GroupVariable Number
1YJ952
1YJ956
1YJ961
1YK001 - YK007
1YK101 - YK104
1YK111 - YK112
1YK121 - YK122
1YK131 - YK133
1YK138 - YK139
1YK141 - YK142
1YK146 - YK148
1YK151 - YK154
1YK166 - YK167
1YK171
1YK186
1YK191
1YK201 - YK202
1YK321 - YK334
1YK376 - YK378
1YK401 - YK406
1YK426 - YK427
1YK431 - YK450
1YK456 - YK467
1YK471 - YK473
1YK476
1YK480 - YK487
1YK491
1YK495 - YK498
1YK511 - YK512
1YK515 - YK516
1YK551 - YK571
1YK615 - YK616
1YK621 - YK630
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
16 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 17

GroupVariable Number
1YK651 - YK660
1YK671 - YK672
1YK676 - YK677
1YK681 - YK686
1YK732 - YK741
1YK776 - YK778
1YK781 - YK785
1YK791 - YK792
1YK796 - YK797
1YK901 - YK912
1YK918 - YK919
1YK921 - YK928
1YK961 - YK980
1YL023 - YL024
1YL056 - YL057
1YL076 - YL077
1YL101 - YL123
1YL131 - YL135
1YL271 - YL272
1YL282 - YL284
1YL302 - YL303
1YL313 - YL314
1YL316 - YL321
1YL351 - YL353
1YL371 - YL374
1YL401
1YL421 - YL429
1YL431 - YL444
1YL461 - YL470
1YL472 - YL478
1YL501 - YL509
1YL531 - YL534
1YL541 - YL544
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
17 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 18

GroupVariable Number
1YL561 - YL569
1YL601 - YL606
1YL611 - YL612
1YL616 - YL617
1YL621
1YL626
1YL631 - YL634
1YL636 - YL637
1YL676 - YL681
1YL691
1YL696 - YL697
1YL731
1YL751 - YL752
1YL756 - YL757
1YL761 - YL779
1YL796
1YL901 - YL910
1YL921 - YL930
1YL951 - YL959
1YL963 - YL968
1YM101 - YM103
1YM521 - YM522
1YM591 - YM599
1YM631 - YM634
1YM641 - YM652
1YM691 - YM698
1YM701 - YM710
1YM761 - YM765
1YN021 - YN024
1YN071 - YN082
1YN091 - YN092
1YN201 - YN202
1YN231 - YN236
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
18 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 19

GroupVariable Number
1YQ011 - YQ017
1YQ036 - YQ042
1YQ201
1YQ231
1YQ291 - YQ295
1YQ401
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for
the recommended use.
B. Concurrent Requirements
The service bulletin(s) listed below must be done before or at the same time as this service bulletin:
Group 2-5:
DescriptionService BulletinCompany
Center Overhead Stowage Bin - Installation
of Life Raft Stowage Containers and Rafts
in Forward and Mid Cabin Ceiling Areas.
737-25-1585, Original Issue.Boeing
Center Overhead Stowage Bin - Installation
of Stowage Container in Forward Cabin
Ceiling Area.
737-25-1586, Original Issue.Boeing
Life Saving Equipment - Install Life Raft
Stowage Containers in Forward and Mid
Passenger Cabin Ceiling Areas.
737-25-1433, Original Issue, R1, R2.Boeing
Center Overhead Stowage Bin - Installation
of Stowage Containers in Forward and Mid
Cabin Ceiling Areas.
737-25-1628, Original Issue.Boeing
C. Reason
The current design of the 737NG Center Overhead Stowage (COS) boxes do not meet the 9G Forward
Load Requirement. The COS boxes that have been delivered need to be changed into a design that
meets the 9G requirement. If this service bulletin is not accomplished, injury to passengers and flight
personnel could occur as a result of being struck by falling objects.
During an emergency landing condition the Center Overhead Stowage (COS) box attachments must
satisfactorily go through a 9G forward acceleration at the maximum weight load to agree with FAR
25.561 specifications. During an emergency landing, this condition could cause the Center Overhead
Stowage box compartments to fall from their supports. The changes given in this service bulletin will
provide the full 9G forward force resistance for all Center Overhead Stowage boxes.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
19 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 20

Boeing Service Related Problem (SRP) 737-SRP-25-0294 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737NG FTD 25-10004 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane YL113 by
Service Bulletin 737-25-1641 Original Issue. The change completed on airplane YL113 by Service
Bulletin Original Issue is equivalent to the release of Revision 1 of this service bulletin. Airplane YL113
has the configuration of a Group 1 airplane.
Revision 1 is sent to add details to the Accomplishment Instructions to secure turnbuckles, add washer
to Figure 1-8, add potted insert hole sizes, and part mark instructions to Figures 1-8, and add Appendix
A for accepted potted insert procedures.
Revision 2 of this service bulletin is sent to add airplanes YB581-YB589 and delete airplanes
YB851-YB859 from Group 2 of the effectivity. The Work Instructions, Figures 1, 2, 3, 4, 6, 7, 8, step
tables were updated to identify the stiffener part numbers for the left and right sides of the airplane,
and Appendix B was added.
D. Description
For each Center Overhead Stowage box location, remove the Center Overhead Stowage box and
accomplish the specified changes and reinstall the Center Overhead Stowage box.
- FWD 1, Fiberglass and Carbon Forward Center Overhead Stowage Boxes:
The COS boxes are changed to add a new stiffener installed on each side of the box to distribute the
load away from the 9G fittings.
- FWD 2, Fiberglass Forward Center Overhead Stowage Boxes:
The COS boxes are changed to add a new stiffener installed on each side of the box to distribute the
load away from the 9G fittings.
- MID 1 and MID 2, Fiberglass and Carbon Mid Center Overhead Stowage Boxes:
The COS boxes are changed to add a new stiffener installed on each side of the box to distribute the
load away from the 9G fittings.
- AFT, Fiberglass Aft Center Overhead Stowage Box:
The COS box will have a new stiffener and a bent stiffener added to each side. Additionally there is a
stiffener (U-channel) added at each forward corner of the box to distribute and counteract the
compression load of the 9G fittings.
NOTE: For Group 1 Airplanes: This service bulletin is applicable to Group 1 airplanes with one or
more center overhead stowage boxes with liferaft provisions installed prior to delivery.
For Group 2 Airplanes: This service bulletin is applicable only to Group 2 airplanes if the
changes given in Service Bulletin 737-25-1585 with Master change 2528MK3691, 2528MK3712
were made.
For Group 3 Airplanes: This service bulletin is applicable only to Group 3 airplanes if the
changes given in Service Bulletin 737-25-1586 with Master change 2528MK3692 were made.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
20 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 21

For Group 4 Airplanes: This service bulletin is applicable only to Group 4 airplanes if the
changes given in Service Bulletin 737-25-1433 with Master change 2528MK3375 were made.
For Group 5 Airplanes: This service bulletin is applicable only to Group 5 airplanes if the
changes given in Service Bulletin 737-25-1628 with Master change 2528MK3728 were made.
Revision 1 - No more work is necessary on airplanes changed in accordance with the original issue of
this service bulletin.
Revision 2 - No more work is necessary on the airplane(s) changed in accordance with the original
issue or Revision 1 of this service bulletin. The parts can only be installed in the correct orientation and
location. The right stiffener can only be installed on the right side and the left stiffener can only be
installed on the left side of the airplane, improper installation is prevented by the surrounding structures.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
231, 232, 241, 242737-600, 737-700, 737-700C,
737-800, 737-900, 737-900ER
Group 2, 5:
Affected Maintenance Zones
ZoneModel
231, 232, 241, 242737-700
Group 3:
Affected Maintenance Zones
ZoneModel
231, 232, 241, 242737-900
Group 4:
Affected Maintenance Zones
ZoneModel
231, 232, 241, 242737-800
E. Compliance
Federal Aviation Administration (FAA) Notice of Proposed Rule Making 2011-NM-131-AD, is related
to this service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
21 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 22

Boeing recommends that the modification given in this service bulletin be done within 60 months after
the original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each Center
Overhead Stowage Box. This estimate is for direct labor only, done by an experienced crew. Adjust
the estimate with operator task hour data if necessary. The estimate does not include lost time. These
are some examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to find the tools.
Work Package 1 - Forward 1, Fiberglass - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove FWD 1, COS
Box
3.256.502Figure 1
1.503.002Install FWD 1, COS
Box
0.250.502Test
6.5013.00TOTAL FOR EACH Forward 1 COS Box.
Work Package Numbers 2, 3 or 7, 4 or 8 and 5 can be done at the same time as Work Package Number
1.
Work Package 2 - Forward 2, Fiberglass - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove FWD 2, COS
Box
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
22 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 23

Work Package 2 - Forward 2, Fiberglass - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
3.256.502Figure 2
1.503.002Install FWD 2, COS
Box
0.250.502Test
6.5013.00TOTAL FOR EACH Forward 2 COS Box
Work Package Numbers 1 or 6, 3 or 7, 4 or 8 and 5 can be done at the same time as Work Package
Number 2.
Work Package 3 - Mid 1, Fiberglass - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove MID 1, COS
Box
3.256.502Figure 3
1.503.002Install MID 1, COS
Box
0.250.502Test
6.5013.00TOTAL FOR EACH Mid 1 COS Box
Work Package Numbers 1 or 6, 2, 4 or 8 and 5 can be done at the same time as Work Package Number
3.
Work Package 4 - Mid 2, Fiberglass - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove MID 2, COS
Box
3.256.502Figure 4
1.503.002Install MID 2, COS
Box
6.500.502Test
6.5013.00TOTAL FOR EACH Mid 2 COS Box
Work Package Numbers 1 or 6, 2, 3 or 7 and 5 can be done at the same time as Work Package Number
4.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
23 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 24

Work Package 5 - Aft, Fiberglass - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove Aft, COS
Box
3.757.502Figure 5
1.503.002Install Aft, COS box
0.250.502Test
7.0014.00TOTAL FOR EACH Aft COS Box
Work Package Numbers 1 or 6, 2, 3 or 7 and 4 or 8 can be done at the same time as Work Package
Number 5.
Work Package 6 - Forward 1, Carbon - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove FWD 1 COS
Box
3.256.502Figure 6
1.503.002Install FWD 1, COS
box
0.250.502Test
6.5013.00TOTAL FOR EACH FWD 1 COS Box
Work Package Numbers 2, 3 or 7, 4 or 8 and 5 can be done at the same time as Work Package Number
6.
Work Package 7- Mid 1, Carbon - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove MID 1, COS
Box
3.256.502Figure 7
1.503.002Install MID 1, COS
box
0.250.502Test
6.5013.00TOTAL FOR EACH MID 1 COS Box
Work Package Numbers 1 or 6, 2, 4 or 8, and 5 can be done at the same time as Work Package Number
7.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
24 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 25

Work Package 8 - Mid 2, Carbon - Center Overhead Stowage Box Change
Elapsed HoursTask HoursNumber of PersonsTask
1.503.002Remove MID 2, COS
Box
3.256.502Figure 8
1.503.002Install MID 2, COS
box
0.250.502Test
6.5013.00TOTAL FOR EACH MID 2 COS Box
Work Package Numbers 1 or 6, 2, 3 or 7 and 5 can be done at the same time as Work Package Number
8.
H. Weight and Balance Changes
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
737-600 Airplanes737-600 Airplanes737-600 Airplanes
480+ 1.15Kit 002A0002-241
NA+ 1.15Kit 002A0002-242
850+ 1.15Kit 002A0002-243
920+ 1.15Kit 002A0002-244
NA+ 0.65Kit 002A0002-245
500+ 1.20Kit 002A0002-246
890+ 1.20Kit 002A0002-247
960+ 1.20Kit 002A0002-248
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
737-700 Airplanes737-700 Airplanes737-700 Airplanes
420+ 1.15Kit 002A0002-241
NA+ 1.15Kit 002A0002-242
850+ 1.15Kit 002A0002-243
920+ 1.15Kit 002A0002-244
NA+ 0.65Kit 002A0002-245
440+ 1.20Kit 002A0002-246
890+ 1.20Kit 002A0002-247
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
25 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 26

Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
960+ 1.20Kit 002A0002-248
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
737-800 Airplanes737-800 Airplanes737-800 Airplanes
280+ 1.15Kit 002A0002-241
350+ 1.15Kit 002A0002-242
850+ 1.15Kit 002A0002-243
920+ 1.15Kit 002A0002-244
NA+ 0.65Kit 002A0002-245
300+ 1.20Kit 002A0002-246
890+ 1.20Kit 002A0002-247
960+ 1.20Kit 002A0002-248
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
737-900 Airplanes737-900 Airplanes737-900 Airplanes
210+ 1.15Kit 002A0002-241
280+ 1.15Kit 002A0002-242
850+ 1.15Kit 002A0002-243
920+ 1.15Kit 002A0002-244
730+ 0.65Kit 002A0002-245
220+ 1.20Kit 002A0002-246
890+ 1.20Kit 002A0002-247
960+ 1.20Kit 002A0002-248
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 38275-169S.
b. Fleet Team Digest (FTD) 737NG FTD 25-10004.
c. Service Related Problem (SRP)737-SRP-25-0294.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
26 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 27

d. Component Maintenance Manual (CMM) 25-00-66.
e. Standard Overhaul Practices Manual (SOPM) 20-30-03, 20-50-10, 20-50-12.
f. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 21-23-01, 25-24-40.
g. Boeing Service Bulletin 737-25-1585.
h. Boeing Service Bulletin 737-25-1586.
i. Boeing Service Bulletin 737-25-1433.
j. Boeing Service Bulletin 737-25-1628.
k. Boeing Product Standard BAC5583, Rev G., Processes For Potting Inserts and Edges Into
Sandwich Panels.
l. FAA Notice of Proposed Rule Making NPRM 2011-NM-131-AD .
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
STOWAGE BOX INSTL-CENTER OVERHEAD STOWAGE412A4100
STOWAGE BOX ASSEMBLY - CENTER OVERHEAD412A4110
UPPER BOX ASSEMBLY - CENTER OVERHEAD STOWAGE412A4111
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
25-24737 Aircraft Maintenance Manual
25-24737 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
27 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 28

L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
28 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 29

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane and Paragraph
2.D., Parts Necessary to Change Spares. Operators are encouraged to share schedule requirements
with Boeing for incorporation of the service bulletin. The kits are subject to the terms and conditions of
the Boeing standard purchase order acknowledgment. Prices are in United States Dollars. Terms: Net
30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameNumber
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)09/16/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)09/30/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)10/14/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)10/28/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)11/11/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)11/29/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)12/13/11Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)1/05/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)1/19/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)02/02/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)02/16/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)03/01/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)03/15/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)50 (a)03/29/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)29 (a)04/12/12Kit, Fwd 1, Fiberglass002A0002-241
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Fwd 2, Fiberglass002A0002-242
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
29 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 30

REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameNumber
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Fwd 2, Fiberglass002A0002-242
2,549.00 (b)157 (c)3 (a)09/16/11Kit, Fwd 2, Fiberglass002A0002-242
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)50 (a)09/16/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)50 (a)09/30/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)50 (a)10/14/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)50 (a)10/28/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)49 (a)11/11/11Kit, Mid 1, Fiberglass002A0002-243
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Mid 2, Fiberglass002A0002-244
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Mid 2, Fiberglass002A0002-244
2,549.00 (b)157 (c)50 (a)09/16/11Kit, Mid 2, Fiberglass002A0002-244
2,549.00 (b)157 (c)50 (a)09/30/11Kit, Mid 2, Fiberglass002A0002-244
2,549.00 (b)157 (c)50 (a)10/14/11Kit, Mid 2, Fiberglass002A0002-244
2,549.00 (b)157 (c)47 (a)10/28/11Kit, Mid 2, Fiberglass002A0002-244
7,350.00 (b)157 (c)1 (a)04/14/11Kit, Aft, Fiberglass002A0002-245
7,350.00 (b)157 (c)1 (a)09/01/11Kit, Aft, Fiberglass002A0002-245
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Fwd 1, Carbon002A0002-246
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Fwd 1, Carbon002A0002-246
2,549.00 (b)157 (c)49 (a)09/16/11Kit, Fwd 1, Carbon002A0002-246
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Mid 1, Carbon002A0002-247
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Mid 1, Carbon002A0002-247
2,549.00 (b)157 (c)49 (a)09/16/11Kit, Mid 1, Carbon002A0002-247
2,549.00 (b)157 (c)1 (a)04/14/11Kit, Mid 2, Carbon002A0002-248
2,549.00 (b)157 (c)50 (a)09/01/11Kit, Mid 2, Carbon002A0002-248
2,549.00 (b)157 (c)49 (a)09/16/11Kit, Mid 2, Carbon002A0002-248
(a) One kit is required per COS Box and one or more kits are required for each airplane depending on the
airplane configuration.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
30 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 31

REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of
the original issue
date of this Ser-
vice Bulletin (US
Dollars)
ROLT as of the
original issue
date of this Ser-
vice Bulletin (Cal-
endar Days)
QTYDateNameNumber
(b) Quote expiration date is January 31, 2012, contact Boeing for current price information. Refer to the
Boeing Part Page on myboeingfleet.com or contact first responder at FR@BOEING.COM.
(c) ROLT as of Revision 2 of this Service Bulletin: 203 (Calendar Days).
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of February 15, 2010. For
task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable number in your purchase order.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the
Operator, are necessary to change one COS Box.
Kit 002A0002-241
NotesExisting Part
Number
NameQTYNew Part Number
-STIFFENER1412A4160-57
-STIFFENER1412A4160-58
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR4CD
(a)-SCREW, CAP16BACS12GU3K5
-WASHER16NAS1149D0332J
-WASHER4NAS1149D0432J
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
31 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 32

Kit 002A0002-241
NotesExisting Part
Number
NameQTYNew Part Number
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
Kit 002A0002-242
NotesExisting Part
Number
NameQTYNew Part Number
-STIFFENER1412A4160-65
-STIFFENER1412A4160-66
(a)-BOLT2BACB30NM3K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR3CD
(a)-SCREW, CAP16BACS12GU3K5
-WASHER20NAS1149D0332J
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
Kit 002A0002-243
NotesExisting Part
Number
NameQTYNew Part Number
-STIFFENER1412A4160-57
-STIFFENER1412A4160-58
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR4CD
(a)-SCREW, CAP16BACS12GU3K5
-WASHER16NAS1149D0332J
-WASHER4NAS1149D0432J
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
32 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 33

Kit 002A0002-243
NotesExisting Part
Number
NameQTYNew Part Number
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
Kit 002A0002-244
NotesExisting Part
Number
NameQTYNew Part Number
-STIFFENER1412A4160-57
-STIFFENER1412A4160-58
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR4CD
(a)-SCREW, CAP16BACS12GU3K5
-WASHER16NAS1149D0332J
-WASHER4NAS1149D0432J
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
Kit 002A0002-245
NotesExisting Part
Number
NameQTYNew Part Number
-BRACKET1412A4160-59
-BRACKET1412A4160-60
-BRACKET1412A4160-61
-BRACKET1412A4160-62
-STIFFENER2412A4160-63
(a)-BOLT, HEX HEAD2BACB30NR4K10
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND12BACI12AD3-10
-NUT4BACN10YR4CD
(a)-SCREW, CAP12BACS12GU3K5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
33 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 34

Kit 002A0002-245
NotesExisting Part
Number
NameQTYNew Part Number
(b)-WASHER15NAS1149D0332J
-WASHER8NAS1149D0432J
-INSERT2NAS1834A4-375
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
(b) There are 3 more parts than are necessary.
Kit 002A0002-246
NotesExisting Part
Number
NameQTYNew Part Number
-STIFFENER1412A4160-67
-STIFFENER1412A4160-68
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR4CD
(a)-SCREW, CAP16BACS12GU3K5
-WASHER16NAS1149D0332J
-WASHER4NAS1149D0432J
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
Kit 002A0002-247
QTY
-STIFFENER1412A4160-67
-STIFFENER1412A4160-68
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR4CD
(a)-SCREW, CAP16BACS12GU3K5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
34 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 35

Kit 002A0002-247
QTY
-WASHER16NAS1149D0332J
-WASHER4NAS1149D0432J
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
Kit 002A0002-248
NotesExisting Part
Number
NameQTYNew Part Number
-STIFFENER1412A4160-67
-STIFFENER1412A4160-68
(a)-BOLT, HEX HEAD2BACB30NR4K6
-INSERT, BLIND16BACI12AD3-10
-NUT2BACN10YR4CD
(a)-SCREW, CAP16BACS12GU3K5
-WASHER16NAS1149D0332J
-WASHER4NAS1149D0432J
(a) If grip length shown is not available at Boeing, fasteners supplied in
kits may be one grip length longer than indicated. Also, if any fasteners
part numbers listed are not available or have been superseded, substi-
tute fasteners may be supplied in kits. Boeing SRM chapter 51 is used
to determine the part numbers used as substitutes.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a), (b)Potting Compound1 tube
(6 oz.)
BMS 5-28, TYPE
18, CLASS 1
(a), (j)Adhesive,1 car-
tridge
(6.7
oz.)
BMS 5-92, TYPE
V, CLASS 2
(c), (d), (e)Cloth Tape1 rollG50344, P212HD
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
35 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 36

NotesNameQTYPart Number /
Specification
(g), (h), (i)Tie Strap4 per
COS
box
BACS38K10
(f)Cleaning solvent, Acetone1 pintO-A-51 or ASTM D
329
(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(b) Supplier Product Designation: Magnobond 92-1 Parts A and B. Magnolia Plastics, Inc.,
5547 Peachtree Industrial Boulevard, Chamblee, Georgia, 30341-2234 Phone: (770)
451-2777, FAX: (770) 457-2115. Cage Code 22121.
(c) Supplier Product Designation: P212HD. 3M Company, 1210 University Ave, Saint Paul,
MN., 55104, Phone: (651) 778-6101, FAX: (651) 778-6123. Cage Code 0E5S5.
(d) Supplier Product Designation: G50344. Nitto Denko Automotive New Jersey Inc., 1990
Rutgers University Blvd., Lakewood, NJ, 08701-4537, Phone: 732-907-7905, FAX: 732-
901-6259. Cage Code 99742.
(e) Applicable to early airplane models that do not have the beaded ECS duct with tie strap
or the pressure cuff configuration.
(f) Inland Technology Inc., Cage Code, 0K209, 401 E. 27th St., Tacoma, WA 98421-
1203,Phone: (253) 383 1177, Fax number: (253) 593 8749.
(g) Applicable to ECS ducts with beaded duct.
(h) Supplier Product Designation: PLT 2M( ). Panduit Corp., 17301 Ridgeland Ave., Tinley
Park, IL., 60477-0981, Phone: (708) 532-1800. Cage code 06383.
(i) Supplier Product Designation: Type T40R(U). Tyton Corp., 7930 N. Faulkner Rd., P.O.
Box 23055, Milwaukee, WI., 53223, Phone: (800-537-1512). Cage Code 53421.
(j) Supplier Product Designation: EC2615. 3M Company, 1210 University Ave, Saint Paul,
MN., 55104, Phone: (651) 778-6101, FAX: (651) 778-6123. Cage Code 0E5S5.
3. Parts Modified and Reidentified
NotesNew Part NumberNameQTYExisting Part
Number
002A0002-180 (b),
(c)
FWD 1 COS Box,
Fiberglass
1006
(d)
412A4110-2B (a)
002A0002-187 (b),
(c)
FWD 1 COS Box,
Fiberglass
20 (d)412A4110-4B (a)
002A0002-188 (b),
(c)
FWD 1 COS Box,
Fiberglass
18 (d)412A4110-5B (a)
002A0002-176 (b),
(c)
FWD 1 COS Box,
Fiberglass
46 (d)412A4110-15B (a)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
36 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 37

NotesNew Part NumberNameQTYExisting Part
Number
002A0002-189 (b),
(c)
FWD 2 COS Box,
Fiberglass
113
(d)
412A4110-19B (a)
002A0002-190 (b),
(c)
FWD 2 COS Box,
Fiberglass
4 (d)412A4110-35B (a)
002A0002-195 (b),
(c)
MID 1 COS Box, Fiber-
glass
975
(d)
412A4110-7B (a)
002A0002-191 (b),
(c)
MID 1 COS Box, Fiber-
glass
52 (d)412A4110-13B (a)
002A0002-198 (b),
(c)
MID 2, Fiberglass883
(d)
412A4110-8B (a)
002A0002-196 (b),
(c)
MID 2, Fiberglass52 (d)412A4110-14B (a)
002A0002-199 (b),
(c)
AFT, Fiberglass2 (d)412A4110-18B (a)
002A0002-173 (b),
(c)
FWD 1, Carbon302
(d)
412A4110-100A
(a)
002A0002-174 (b),
(c)
FWD 1, Carbon107
(d)
412A4110-110B
(a)
002A0002-175 (b),
(c)
FWD 1, Carbon153
(d)
412A4110-150A
(a)
002A0002-220 (b),
(c)
FWD 1, Carbon23 (d)412A4110-160A
(a)
002A0002-179 (b),
(c)
FWD 1, Carbon10 (d)412A4110-161B
(a)
002A0002-192 (b),
(c)
MID 1, Carbon261
(d)
412A4110-200A
(a)
002A0002-193 (b),
(c)
MID 1, Carbon269
(d)
412A4110-210A
(a)
002A0002-197 (b),
(c)
MID 2, Carbon476
(d)
412A4110-250A
(a)
(a) Make the change in accordance with in this service bulletin.
(b) This is the part number after the change is done in accordance with this service bulletin.
(c) This part is not used in production.
(d) Estimated total number of COS boxes for all 737-600/700/800/900 airplanes.
4. Parts Removed and Not Replaced
None.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
37 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 38

D. Parts Necessary to Change Spares
To get the kits shown below, refer to Paragraph 2.A., Material - Price and Availability.
QTYNamePart Number
(a)Kit, Forward 1002A0002-241
(a)Kit, Forward 2002A0002-242
(a)Kit, Mid 1002A0002-243
(a)Kit, Mid 2002A0002-244
(a)Kit, Aft002A0002-245
(a)Kit, Forward 1 Car-
bon
002A0002-246
(a)Kit, Mid 1 Carbon002A0002-247
(a)Kit, Mid 2 Carbon002A0002-248
(a) One Top Kit is needed per COS box.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
38 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 39

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are in Structural Repair Manual (SRM)
Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
5. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51. Alternate fasteners are listed in SRM Chapter 51.
6. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
The removed part can be discarded if a new or serviceable part is installed.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
39 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 40

B. WORK INSTRUCTIONS
The work given in this service bulletin can be accomplished during a single regularly scheduled
maintenance visit. However, access instructions are provided in Work Packages to allow independent,
or a combination of Work Packages to be accomplished in a given maintenance visit. Identify the Work
Package(s) applicable to the airplane center overhead stowage box location and material type.
Group 2-5:
1. Accomplish the applicable service bulletin listed in the Concurrent Requirements Paragraph 1.B.,
or ensure it has been accomplished.
WORK PACKAGE 1: Forward 1- Fiberglass Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the Forward 1 COS Box in accordance with FIGURE 1.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
WORK PACKAGE 2: Forward 2- Fiberglass Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the Forward 2 COS Box in accordance with FIGURE 2.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
40 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 41

NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
WORK PACKAGE 3: Mid 1- Fiberglass Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the MID 1 COS Box in accordance with FIGURE 3.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
WORK PACKAGE 4: Mid 2- Fiberglass Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the MID 2 COS Box in accordance with FIGURE 4.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
41 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 42

WORK PACKAGE 5: Aft - Fiberglass Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the AFT COS Box in accordance with FIGURE 5.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
WORK PACKAGE 6: Forward 1 - Carbon, Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the Forward 1 COS Box in accordance with FIGURE 6.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
WORK PACKAGE 7: MID 1 Carbon, Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
42 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 43

2. Modify the MID 1 COS Box in accordance with FIGURE 7.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
WORK PACKAGE 8: MID 2 - Carbon, Center Overhead Stowage Box Change
1. Remove Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an
accepted procedure.
NOTE: Tie rod turnbuckles can be secured to prevent rotation or change of length.
2. Modify the MID 2 COS Box in accordance with FIGURE 8.
3. Install Center Overhead Stowage Box, refer to 737-600/700/800/900 AMM 25-24-40 as an accepted
procedure.
NOTE: Any materials used to secure the tie rod turnbuckles are to be removed.
4. Perform functional test of the ECS system, Overhead Distribution Duct Test refer to
737-600/700/800/900 AMM 21-23-01 as an accepted procedure.
NOTE: A leak is defined as where airflow can be felt on a hand a minimum of 2 inches away
from the surface.
5. Put the passenger compartment fuselage crown back to a serviceable condition. Refer to
737-600/700/800/900 AMM 25-24-40 as an accepted procedure.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2: November 20, 2012
43 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 44 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
FWD 1
AND F BEFORE
CAND G AFTER
BEFORE  2029771
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 1 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-25-1641
Work - See page 1 for details.  44 of 206

### Page 45 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
BEFORE
2031348
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 2 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  45 of 206

### Page 46 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
~
AFTER
CENTER
OVERHEAD
STOWAGE
BOX
BRACKET
2031358
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 3 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-25-1641
Work - See page 1 for details.  46 of 206

### Page 47 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
8 PLACES 133
8 PLACES 5
9G FITTING
FWD
9G FITTING
STIFFENER  2031398
A-A
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 4 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  47 of 206

### Page 48 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
BEFORE
2033862
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
_ CHANGE
(SHEET 5 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  48 of 206

### Page 49 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
G  AFTER
CENTER
OVERHEAD
STOWAGE
BOX
STIFFENER
2033844
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 6 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  49 of 206

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
8 9 10 8 PLACES
*002A0002-XXX
12) 8 PLACES
14)
9G FITTING
FWD
9G FITTING
~ STIFFENER
B-B  2033846
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 7 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  50 of 206

### Page 51

More DataQtyIdentificationNameTaskStep
(a), (g) Left side.1412A4160-58STIFFENERInstall (New)1
(a) Left side.8BACI12AD3-10INSERT, BLINDLocate2
Hole diameter 0.452
- 0.457. Hole depth
0.350 - 0.375 from
surface.
-412A4125-( )PANEL CENTER
OVERHEAD
STOWAGE
Drill
Left side, refer to
CMM 25-00-66 and
Appendix A as an
accepted procedure.
8BACI12AD3-10INSERT, BLINDInstall (New)3
(d) Refer to CMM
25-00-66 and Ap-
pendix A as an ac-
cepted procedure.
-BMS 5-28, TYPE 18,
CLASS 1
POTTING COMPOUNDInstall (New)
(c) Left side, refer to
SOPM 20-30-03 as
an accepted proce-
dure.
-412A4125-( )PANEL CENTER
OVERHEAD
STOWAGE
Clean4
(c) Mating face with
panel center over-
head stowage, refer
to SOPM 20-30-03
as an accepted pro-
cedure.
1412A4160-58STIFFENERClean
(f) To stiffener sur-
face to be bonded.
Refer to SOPM 20-
50-12 as an accept-
ed procedure.
-BMS 5-92, TYPE V,
CLASS 2
BONDING MATERIALInstall (New)
Clamp as needed to
ensure surfaces fully
touch and prevent
movement.
1412A4160-58STIFFENERBond
Clean any excess
squeezed out bond-
ing material on deco-
rative surface before
final cure.
-BMS 5-92, TYPE V,
CLASS 2
BONDING MATERIALRemove
Tighten to 25-35 in-
lbf.
8BACS12GU3K5SCREW, CAPInstall (New)5
8NAS1149D0332JWASHERInstall (New)
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 8 OF 11)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2 November 20, 2012
51 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 52

More DataQtyIdentificationNameTaskStep
(e) Left side, 0.250
+/- 0.030 hole
through 9G fitting
common to Stiffener.
-412A4160-10BRACKET, 9G FIT-
TING
Drill6
Left side, at 9G Fit-
ting Location. Bolt
head should be fac-
ing up. Tighten to
63-67 in.-lbf.
1BACB30NR4K6BOLT, HEX HEADInstall (New)7
2NAS1149D0432JWASHERInstall (New)
1BACN10YR4CDNUTInstall (New)
(a), (g) Right side.1412A4160-57STIFFENERInstall (New)8
(a) Right side.8BACI12AD3-10INSERT, BLINDLocate9
Hole diameter 0.452
- 0.457. Hole depth
0.350 - 0.375 from
surface.
-412A4125-( )PANEL CENTER
OVERHEAD
STOWAGE
Drill
Right side, refer to
CMM 25-00-66 and
Appendix A as an
accepted procedure.
8BACI12AD3-10INSERT, BLINDInstall (New)10
(d) Refer to CMM
25-00-66 and Ap-
pendix A as an ac-
cepted procedure.
-BMS 5-28, TYPE 18,
CLASS 1
POTTING COMPOUNDInstall (New)
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 9 OF 11)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2 November 20, 2012
52 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 53

More DataQtyIdentificationNameTaskStep
(c) Right side, refer
to SOPM 20-30-03
as an accepted pro-
cedure.
-412A4125-( )PANEL CENTER
OVERHEAD
STOWAGE
Clean11
(c) Mating face with
panel center over-
head stowage, refer
to SOPM 20-30-03
as an accepted pro-
cedure.
1412A4160-57STIFFENERClean
(f) To stiffener sur-
face to be bonded.
Refer to SOPM 20-
50-12 as an accept-
ed procedure.
-BMS 5-92, TYPE V,
CLASS 2
BONDING MATERIALInstall (New)
Clamp as needed to
ensure surfaces fully
touch and prevent
movement.
1412A4160-57STIFFENERBond
Clean any excess
squeezed out bond-
ing material on deco-
rative surface before
final cure.
-BMS 5-92, TYPE V,
CLASS 2
BONDING MATERIALRemove
Tighten to 25-35 in-
lbf.
8BACS12GU3K5SCREW, CAPInstall (New)12
8NAS1149D0332JWASHERInstall (New)
(e) Right side, 0.250
+/- 0.030 hole
through 9G fitting
common to Stiffener.
-412A4160-10BRACKET, 9G FIT-
TING
Drill13
Right side, at 9G Fit-
ting Location. Bolt
head should be fac-
ing up. Tighten to
63-67 in-lbf.
1BACB30NR4K6BOLT, HEX HEADInstall (New)14
2NAS1149D0432JWASHERInstall (New)
1BACN10YR4CDNUTInstall (New)
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 10 OF 11)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2 November 20, 2012
53 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 54

More DataQtyIdentificationNameTaskStep
(b) Refer to SOPM
20-50-10 as an ac-
cepted procedure.
1002A0002-188CENTER OVERHEAD
STOWAGE BOX -
FWD 1
Identify15
(b) Refer to SOPM
20-50-10 as an ac-
cepted procedure.
1002A0002-187CENTER OVERHEAD
STOWAGE BOX -
FWD 1
Identify
(b) Refer to SOPM
20-50-10 as an ac-
cepted procedure.
1002A0002-180CENTER OVERHEAD
STOWAGE BOX -
FWD 1
Identify
(b) Refer to SOPM
20-50-10 as an ac-
cepted procedure.
1002A0002-176CENTER OVERHEAD
STOWAGE BOX -
FWD 1
Identify
(a) Make sure to line up the existing holes at the lower part of the Stiffener at the damper location. The flat
surface of the Stiffener should contact the side surface of the stow box. The top surface of the bent part
of the Stiffener should contact the 9G fitting bottom surface.
(b) It is acceptable to hand letter the changed COS box part number and current date using a permanent
marking pen in a contrasting color or using an adhesive backed decal. Re-part mark to be applied to non-
decorative surface of the modified COS box with changed COS Box part number. Re-part mark should
not obscure existing part mark.
(c) To clean bonding surfaces, use Acetone O-A-51 or equivalent solvent.
(d) Potting Compound cure time is 20 hours at 70 degrees Fahrenheit using hardener 5318C or for 12 hours
at 70 degrees Fahrenheit using hardener 941. Refer to BMS 5-28 for cure times at various temperature
ranges.
(e) Use existing hole in Stiffener as pilot to drill through the 9G fitting bracket.
(f) Bonding material cures under pressure for 7 hours, minimum at 70-100 degrees Fahrenheit, refer to
SOPM 20-50-12 as an accepted procedure. The adhesive thickness over the potted insert area should
be excessive to allow adhesive to squeeze out when pressure is applied during bonding.
(g) To locate the inserts, line up the oversized through hole at the lower part of the Stiffener with the existing
aft-most fastener at the damper location. The flat surface of the Stiffener should contact the side surface
of the stow box. The top surface of the bent part of the Stiffener should contact the 9G fitting bottom surface.
FIGURE 1: PASSENGER CABIN - FORWARD 1 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 11 OF 11)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: May 13, 2011
737-25-1641Revision 2 November 20, 2012
54 of 206
BOEING SERVICE BULLETIN 737-25-1641

### Page 55 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
FWD 2
A AND  BEFORE
CLAND G AFTER
CENTER
OVERHEAD
STOWAGE
BEFORE  2031986
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 1 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  55 of 206

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
BEFORE
2034886
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 2 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  56 of 206

### Page 57 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
AFTER
CENTER
OVERHEAD
STOWAGE
BOX
BRACKET.
2035041
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 3 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.  57 of 206

### Page 58 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
8 PLACES 123
8 PLACES 5
9G FITTING
FWD
9G FITTING
STIFFENER
A-A  2035062
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 4 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  58 of 206

### Page 59 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
2035145
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 5 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  PROPRIETARY - Copyright ® Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-25-1641
Work - See page 1 for details.  59 of 206

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-25-1641
(13, 14
G  AFTER
CENTER
OVERHEAD
STOWAGE
BOX
BRACKET
2035186
FIGURE 2: PASSENGER CABIN - FORWARD 2 CENTER OVERHEAD STOWAGE BOX, FIBERGLASS -
CHANGE
(SHEET 6 OF 11)
Original Issue: May 13, 2011
Revision 2 November 20, 2012  Export Controlled ECCN: 9E991 - BOEING  PROPRIETARY - Copyright © Unpublished  737-25-1641
Work - See page 1 for details.  60 of 206

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-25-1641/file/4192147bd5cb.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
