# Boeing Special Attention Service Bulletin 737-27-1282: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2010-1313; AD 2011-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-27-1282](https://openairdocs.org/service-documents/boeing/sb-737-27-1282.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 38
- PDF: https://openairdocs.org/files/sha256/11/e7/11e75aede5b570afb74a25d88ca5d9bd42d78e8698b1502f5815779ea4ecd3ab
- Page: https://openairdocs.org/service-documents/boeing/sb-737-27-1282/file/11e75aede5b5

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-27-1282
Original Issue: March 15, 2007
Revision 1: June 14, 2010
ATA System: 2721
SUBJECT: FLIGHT CONTROLS - Rudder and Rudder Trim Control System - Wire Bundle W443
and Left Forward Rudder Quadrant Clearance Inspection
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2007 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
1 of 38
2.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
2 of 38
BOEING SERVICE BULLETIN 737-27-1282
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 2 2
B. Concurrent Requirements ...................................... 2 2
C. Reason ................................................ 2 2
D. Description .............................................. 2 3
E. Compliance .............................................. 2 4
F. Approval ............................................... 2 4
G. Manpower .............................................. 2 4
H. Weight and Balance Changes .................................... 2 5
I. Electrical Load Data ......................................... 2 5
J. References .............................................. 2 6
1. Existing Data: ......................................... 2 6
2. Data supplied with this Service Bulletin: ........................... 2 6
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 2 6
K. Publications Affected ........................................ 2 6
L. Interchangeability and Intermixability of Parts ........................... 2 6
2. MATERIAL INFORMATION ........................................ 2 7
A. Material - Price and Availability ................................... 2 7
B. Industry Support Information .................................... 2 7
C. Parts Necessary For Each Airplane ................................. 2 7
1. Kits/Parts: ........................................... 2 7
2. Parts and Materials Supplied by the Operator: ........................ 2 7
3. Parts Modified and Reidentified: ............................... 2 7
4. Parts Removed and Not Replaced: .............................. 2 7
D. Parts Necessary to Change Spares ................................. 2 7
E. Special Tooling - Price and Availability ............................... 2 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 8
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 9
A. GENERAL INFORMATION ..................................... 2 9
B. WORK INSTRUCTIONS ....................................... 2 9
FIGURE 1: WIRE BUNDLE W443 INSPECTION FOR DAMAGE .................... 3 5
FIGURE 2: WIRE BUNDLE W443 CLEARANCE ADJUSTMENT .................... 3 7
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
3 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
4 of 38
BOEING SERVICE BULLETIN 737-27-1282
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-27-1282Original Issue: March 15, 2007
Revision 1: June 14, 2010
ATA System: 2721
SUBJECT: FLIGHT CONTROLS - Rudder and Rudder Trim Control System - Wire Bundle W443
and Left Forward Rudder Quadrant Clearance Inspection
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is required for airplanes inspected by the original issue of this service bulletin.
The following airplanes were added to this service bulletin: 2018-2591, 2593-2597, 2600-2602, 2640-2793,
2795-2800, 2802, 2803, 2805, 2807, 2810, 2812.
REASON FOR REVISION
This service bulletin is sent to tell operators that additional airplanes have been added to this service bulletin
effectivity. The airplanes added may have been delivered with no inspection of the wire bundle W443 done in
production.
The following airplanes were added to the service bulletin and Group 1 by Revision 01: 2018-2591, 2593-2597,
2600-2602, 2640-2793, 2795-2800, 2802, 2803, 2805, 2807, 2810, 2812.
Revision 1; The following Paragraphs are changed:
 Paragraph 1.A., Effectivity is revised to add airplanes.
 Paragraph 1.C., Reason is revised to add reason for revision 1.
 Paragraph 1.D., Description is revised to add "No more work required" and maintenance zones.
No more work is required for airplanes inspected by the original issue of this service bulletin.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
March 15, 2007Original Issue:
June 14, 2010Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
5 of 38

### Page 6

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
6 of 38
BOEING SERVICE BULLETIN 737-27-1282
BLANK PAGE

### Page 7

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-27-1282Original Issue: March 15, 2007
Revision 1: June 14, 2010
ATA System: 2721
SUBJECT: FLIGHT CONTROLS - Rudder and Rudder Trim Control System - Wire Bundle W443
and Left Forward Rudder Quadrant Clearance Inspection
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin is sent to tell operators that on some airplanes an interference (riding) condition may exist
between wire bundle W443 and the Left Forward rudder quadrant. The interference can occur during full Right
Rudder travel. Restricted control surface movement and wire bundle damage can occur when there is not
sufficient clearance between wire bundle W443 and the left forward rudder quadrant. If this Service Bulletin is
not done, the wire bundle could restrict the free movement of the rudder quadrant. If the wire bundle is damaged,
uncommanded stabilizer trim or autopilot disconnects could occur.
This condition was found on airplane YK904 during pre-flight checks at Boeing's Renton Field facility. A pilot
reported light interference during full right travel. The problem was identified as contact between the left forward
rudder quadrant and wire bundle W443. On investigation it was found that the wire bundle was installed with
too much slack between clamps. An Non-Conformance Record (NCR) was created to inspect all airplanes prior
to delivery and to rework the wire bundle installation as necessary. 32 airplanes were inspected, of which 20
were found to have contact between the left forward quadrant and the wire bundle. Boeing has revised the
installation drawing to add clarification to the wire bundle routing.
Accomplishment of this service bulletin inspects the left forward rudder quadrant for sufficient clearance with
wire bundle W443. Instructions are also given to adjust the routing of the wire bundle W443 and repair, if
necessary.
Boeing Service Related Problem (SRP) 737NG-SRP-27-0190 is related to this service bulletin.
ACTION
Get access to the airplane flight compartment and left forward rudder quadrant through the forward access door
112A.
Part 1: Wire Bundle W443 Inspection for damage.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
7 of 38

### Page 8

— Do a detail inspection and measure the minimum clearance between the wire bundle W443 and the left
forward rudder quadrant.
Part 2: Wire Bundle W443 Clearance Adjustment.
— Adjust the wire bundle W443 routing to obtain a sufficient clearance between wire bundle and rudder
quadrant.
— Do an operational test of the rudder control system.
Part 3: Wire Bundle W443 Repair and Adjustment.
— Repair damaged wire bundle W443.
— Measure the minimum clearance between the wire bundle W443 and the left forward rudder quadrant.
— Do an operational test of the rudder control system as given in Part 2.
— Test applicable systems affected by wire bundle damage.
EFFECTIVITY
737-600/-700/-700C/-800/-900/-900ER Airplanes. Refer to Paragraph 1.A.1., Airplanes for the list of affected
airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends this service bulletin be incorporated within 60 months from the date on this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of May 12, 2006. Please refer to Paragraph
2.B., Industry Support Information.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
8 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 9 (OCR)

BOEING SERVICE BULLETIN 737-27-1282
LEFT FORWARD
RUDDER QUADRANT
RUDDER PEDAL (4)
DO AN INSPECTION OF WIRE BUNDLE W443 AT THE LEFT FORWARD RUDDER QUADRANT TO
CHECK FOR DAMAGE, MEASURE THE CLEARANCE BETWEEN THE QUADRANT AND WIRE BUNDLE.
REPAIR ANY DAMAGE FOUND, ADJUST WIRE BUNDLE ROUTING AS NECESSARY TO OBTAIN THE  1319650
MINIMUM PERMITTED CLEARANCE OF 0.5 INCH.
Original Issue: March 15, 2007
Revision 1: June 14, 2010  737-27-1282
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  9 of 38

### Page 10

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
10 of 38
BOEING SERVICE BULLETIN 737-27-1282
BLANK PAGE

### Page 11

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-27-1282
Original Issue: March 15, 2007
Revision 1: June 14, 2010
ATA System: 2721
SUBJECT: FLIGHT CONTROLS - Rudder and Rudder Trim Control System - Wire Bundle W443
and Left Forward Rudder Quadrant Clearance Inspection
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.
DESCRIPTIONCONFIGURATIONGROUP
737-600/ -700/ -700C/ -800/ -900/ -900ER with possible interference
(riding) condition between wire bundle W443 and Left Forward Rudder
Quadrant, line numbers 1 through 1842, 1844 through 1902, 1904
through 1905, and 1907.
-1
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
GroupVariable Number
1YA001 - YA099
1YA101 - YA199
1YA201 - YA211
1YA221
1YA231 - YA242
1YA251 - YA256
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
11 of 38

### Page 12

GroupVariable Number
1YA271 - YA272
1YA291
1YA301 - YA302
1YA311 - YA314
1YA321 - YA323
1YA336 - YA345
1YA351
1YA356 - YA357
1YA366 - YA367
1YA371 - YA377
1YA501 - YA536
1YA541 - YA552
1YA571 - YA578
1YA601 - YA615
1YA621 - YA622
1YA626 - YA631
1YA635 - YA636
1YA641 - YA642
1YA645 - YA650
1YA656 - YA659
1YA666 - YA667
1YA671 - YA672
1YA681 - YA691
1YA701 - YA710
1YA721 - YA722
1YA731 - YA734
1YA751 - YA756
1YA801 - YA803
1YA809
1YA811 - YA814
1YA831 - YA835
1YA841 - YA862
1YA881 - YA882
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
12 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 13

GroupVariable Number
1YA891 - YA892
1YA961 - YA976
1YB001 - YB006
1YB101 - YB132
1YB151 - YB153
1YB156 - YB158
1YB161 - YB164
1YB171 - YB172
1YB181 - YB184
1YB201 - YB208
1YB271
1YB276
1YB301 - YB310
1YB371 - YB387
1YB392
1YB501 - YB502
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB579
1YB581 - YB595
1YB601 - YB632
1YB651
1YB656
1YB671 - YB672
1YB851 - YB863
1YB871 - YB874
1YB881 - YB893
1YB901 - YB903
1YB911
1YB961 - YB974
1YB986
1YC001 - YC030
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
13 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 14

GroupVariable Number
1YC051 - YC084
1YC091 - YC094
1YC101 - YC104
1YC111 - YC113
1YC121
1YC126 - YC127
1YC136 - YC141
1YC146 - YC147
1YC151 - YC156
1YC166 - YC171
1YC176 - YC179
1YC186 - YC190
1YC201 - YC203
1YC206 - YC207
1YC301 - YC305
1YC321 - YC386
1YC391 - YC394
1YC396
1YC401 - YC417
1YC421 - YC422
1YC426 - YC428
1YC436 - YC439
1YC441 - YC448
1YC451 - YC455
1YC459
1YC461 - YC467
1YC471 - YC499
1YC501 - YC526
1YC571 - YC583
1YC587 - YC589
1YC591 - YC593
1YC601 - YC655
1YC681 - YC696
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
14 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 15

GroupVariable Number
1YC701 - YC715
1YC720 - YC725
1YC727 - YC741
1YC744 - YC752
1YC761 - YC770
1YC781 - YC793
1YC801 - YC892
1YC901 - YC907
1YC921 - YC922
1YC931 - YC932
1YC941 - YC951
1YC971 - YC978
1YC981 - YC983
1YD001 - YD007
1YD021 - YD025
1YD041 - YD057
1YD081 - YD084
1YD101 - YD110
1YD121 - YD126
1YD151 - YD159
1YD171 - YD172
1YD201 - YD203
1YD206 - YD209
1YD216 - YD219
1YD251 - YD254
1YD256 - YD257
1YD261
1YD301 - YD334
1YD391
1YD401 - YD410
1YD412 - YD413
1YD415
1YD481 - YD485
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
15 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 16

GroupVariable Number
1YD491 - YD492
1YD496 - YD499
1YD501 - YD512
1YD531 - YD535
1YD541 - YD547
1YD561 - YD564
1YD571 - YD572
1YD591 - YD595
1YD601 - YD612
1YD651 - YD655
1YE001 - YE020
1YE051
1YE101 - YE109
1YE151 - YE157
1YE171 - YE172
1YE201 - YE206
1YE301 - YE305
1YE321 - YE326
1YE371 - YE375
1YE381 - YE383
1YF001 - YF002
1YF021
1YF023 - YF027
1YF052 - YF053
1YF106 - YF107
1YF111
1YF176 - YF177
1YF501 - YF508
1YG001 - YG044
1YG061 - YG064
1YG066 - YG089
1YG091 - YG099
1YG103
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
16 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 17

GroupVariable Number
1YG111 - YG114
1YG116 - YG121
1YG201 - YG203
1YG211 - YG212
1YG214
1YG251 - YG252
1YG501 - YG509
1YG601 - YG602
1YG701
1YG711
1YH002 - YH012
1YH031 - YH032
1YH051 - YH052
1YH055
1YH101 - YH109
1YH111 - YH119
1YH201 - YH202
1YH206
1YH301 - YH302
1YJ001 - YJ008
1YJ010 - YJ013
1YJ021
1YJ471 - YJ480
1YJ501 - YJ517
1YJ531 - YJ552
1YJ555 - YJ562
1YJ564 - YJ570
1YJ591 - YJ596
1YJ598
1YJ631 - YJ632
1YJ671 - YJ689
1YJ694
1YJ801 - YJ867
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
17 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 18

GroupVariable Number
1YJ871 - YJ873
1YJ875 - YJ876
1YJ901 - YJ904
1YJ908 - YJ909
1YJ911 - YJ929
1YJ931 - YJ937
1YJ941 - YJ943
1YJ948 - YJ956
1YJ976 - YJ977
1YK001 - YK007
1YK101 - YK104
1YK111 - YK112
1YK121 - YK122
1YK131 - YK132
1YK136 - YK139
1YK141 - YK142
1YK148
1YK151
1YK163 - YK166
1YK171
1YK177
1YK186
1YK301 - YK304
1YK306 - YK310
1YK321 - YK330
1YK334 - YK339
1YK361 - YK367
1YK370 - YK373
1YK375
1YK401 - YK406
1YK426 - YK427
1YK431 - YK434
1YK438 - YK450
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
18 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 19

GroupVariable Number
1YK456 - YK461
1YK480 - YK486
1YK495
1YK511 - YK516
1YK521 - YK523
1YK551 - YK554
1YK565
1YK567 - YK571
1YK576 - YK577
1YK580 - YK585
1YK601 - YK602
1YK606 - YK607
1YK611 - YK612
1YK614
1YK616
1YK621
1YK624 - YK634
1YK643 - YK644
1YK651 - YK661
1YK671 - YK672
1YK676
1YK681
1YK701 - YK706
1YK708 - YK711
1YK713
1YK716 - YK719
1YK722 - YK741
1YK751 - YK763
1YK791 - YK792
1YK796 - YK797
1YK801 - YK814
1YK819 - YK884
1YK888 - YK899
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
19 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 20

GroupVariable Number
1YK901 - YK902
1YK904
1YK907 - YK912
1YK918
1YK921 - YK926
1YK941 - YK955
1YK961 - YK971
1YK981 - YK986
1YL001
1YL012 - YL016
1YL021 - YL024
1YL051 - YL052
1YL056 - YL057
1YL061
1YL066 - YL069
1YL076 - YL077
1YL101 - YL114
1YL116 - YL124
1YL201 - YL207
1YL209 - YL210
1YL271 - YL272
1YL281 - YL282
1YL301 - YL303
1YL311 - YL312
1YL316 - YL318
1YL320
1YL351 - YL353
1YL371 - YL373
1YL401
1YL421 - YL426
1YL431 - YL437
1YL461 - YL471
1YL473 - YL474
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
20 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 21

GroupVariable Number
1YL501 - YL506
1YL531 - YL534
1YL541
1YL561
1YL563 - YL565
1YL591
1YL601 - YL606
1YL611
1YL616 - YL617
1YL621
1YL663 - YL664
1YL676
1YL901 - YL903
1YL905 - YL909
1YL931 - YL934
1YL952 - YL953
1YM101 - YM103
1YM201 - YM208
1YM212 - YM236
1YM238
1YM251 - YM282
1YM298 - YM299
1YM301 - YM366
1YM369 - YM376
1YM471
1YM481 - YM484
1YM501 - YM507
1YM509 - YM515
1YM521 - YM522
1YM541
1YM551 - YM553
1YM571 - YM572
1YM581 - YM582
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
21 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 22

GroupVariable Number
1YM632 - YM634
1YM641 - YM648
1YM651
1YM671 - YM672
1YM691 - YM693
1YM701 - YM707
1YN001 - YN004
1YN007 - YN016
1YN021 - YN024
1YN061
1YN071 - YN079
1YN091 - YN092
1YN101
1YN106 - YN112
1YN121
1YN201 - YN202
1YN211 - YN216
1YN231 - YN234
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin is sent to tell operators that on some airplanes an interference (riding) condition
may exist between wire bundle W443 and the Left Forward rudder quadrant. The interference can
occur during full Right Rudder travel. Restricted control surface movement and wire bundle damage
can occur when there is not sufficient clearance between wire bundle W443 and the left forward rudder
quadrant. If this Service Bulletin is not done, the wire bundle could restrict the free movement of the
rudder quadrant. If the wire bundle is damaged, uncommanded stabilizer trim or autopilot disconnects
could occur.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
22 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 23

This condition was found on airplane YK904 during pre-flight checks at Boeing's Renton Field facility.
A pilot reported light interference during full right travel. The problem was identified as contact between
the left forward rudder quadrant and wire bundle W443. On investigation it was found that the wire
bundle was installed with too much slack between clamps. An Non-Conformance Record (NCR) was
created to inspect all airplanes prior to delivery and to rework the wire bundle installation as necessary.
32 airplanes were inspected, of which 20 were found to have contact between the left forward quadrant
and the wire bundle. Boeing has revised the installation drawing to add clarification to the wire bundle
routing.
Accomplishment of this service bulletin inspects the left forward rudder quadrant for sufficient clearance
with wire bundle W443. Instructions are also given to adjust the routing of the wire bundle W443 and
repair, if necessary.
Boeing Service Related Problem (SRP) 737NG-SRP-27-0190 is related to this service bulletin
Revision 01: This service bulletin is sent to tell operators that additional airplanes have been added to
this service bulletin effectivity. The airplanes added may have been delivered with no inspection of the
wire bundle W443 done in production.
Revision 1; The following Paragraphs are changed:
 Paragraph 1.A., Effectivity is revised to add airplanes.
 Paragraph 1.C., Reason is revised to add reason for revision 1.
 Paragraph 1.D., Description is revised to add "No more work required" and maintenance zones.
D. Description
Get access to the airplane flight compartment and left forward rudder quadrant through the forward
access door 112A.
Part 1: Wire Bundle W443 Inspection for damage.
— Do a detail inspection and measure the minimum clearance between the wire bundle W443 and
the left forward rudder quadrant.
Part 2: Wire Bundle W443 Clearance Adjustment.
— Adjust the wire bundle W443 routing to obtain a sufficient clearance between wire bundle and
rudder quadrant.
— Do an operational test of the rudder control system.
Part 3: Wire Bundle W443 Repair and Clearance Adjustment.
— Repair damaged wire bundle W443.
— Measure the minimum clearance between the wire bundle W443 and the left forward rudder
quadrant.
— Do an operational test of the rudder control system as given in Part 2.
— Test applicable systems affected by wire bundle damage.
Revision 1 - No more work is necessary on airplanes changed in accordance with original issue of this
service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
23 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 24

Affected Maintenance Zones
ZoneModel
114, 115737-600, 737-700, 737-700C,
737-800, 737-900, 737-900ER
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends this service bulletin be incorporated within 60 months from the date on this service
bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The tables below show an estimate of the task-hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task-hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
The table below shows the time necessary to do Part 1: Wire Bundle W443 Inspection for damage.
Elapsed HoursTask-HoursNumber of Per-
sons
Task
0.750.751Open Access
0.250.502Figure 1
0.750.751Close Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
24 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 25

Elapsed HoursTask-HoursNumber of Per-
sons
Task
1.752.00TOTAL FOR EACH AIRPLANE
The table below shows the time necessary to do Part 1: Wire Bundle W443 Inspection for damage and
Part 2: Wire Bundle W443 Clearance Adjustment.
Elapsed HoursTask-HoursNumber of Per-
sons
Task
0.750.751Open Access
0.250.502Figure 1
0.501.002Figure 2
0.750.751Close Access
2.253.00TOTAL FOR EACH AIRPLANE
The table below shows the time necessary to do Part 1: Wire Bundle W443 Inspection for damage and
Part 3: Wire Bundle Repair and Clearance Adjustment.
Elapsed HoursTask-HoursNumber of Per-
sons
Task
0.750.751Open Access
0.250.502Figure 1
0.501.002Figure 2
0.750.751Close Access
0.750.751Test(s)
3.00 (a)3.75 (a)TOTAL FOR EACH AIRPLANE
(a) This estimate does not include the time necessary to repair wire bundle W443 if
damage is found. More time could be necessary to do the repair as the quantity of
damage is not known.
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
25 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 26

J. References
1. Existing Data:
a. Service Related Problem (SRP) 737NG-SRP-27-0190.
b. 737 Maintenance Manual (AMM) Subject 06-41-00, 22-11-00, 23-11-00, 24-22-00, 27-21-00,
27-41-00, 33-11-00.
c. Boeing Standard Wiring Practices Manual (SWPM) 20-10-06, 20-10-11, 20-10-12, 20-10-13,
20-10-19.
2. Data supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Wire Bundle Instl - Flight Deck Floor Beams288A4140 Sheet 433
This drawing was used to prepare this service bulletin. This drawing is not necessary to make the
specified changes, and is not supplied with this service bulletin. This drawing may not be applicable
to all airplane configurations or operators.
K. Publications Affected
None.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
26 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 27

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary For Each
Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of May 12, 2006. For inspection
task hour reimbursement for airplanes in warranty as of that date, send a claim to Boeing Warranty. If
the condition described in this service bulletin is found during the inspection for airplanes in warranty
as of that date and additional task hours are required, send a claim to Boeing Warranty. Please refer
to this service bulletin number and reference the airplane variable number in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
None.
2. Parts and Materials Supplied by the Operator:
NotesNameQTYPart Number / Specification
(a) (c)Lacing Tape1BMS 13-54 Grade D, Type III,
Class 1, Finish C
(a) (b) (c)Plastic Tie Strap20BACS38K9
(a) Refer to SWPM 20-10-11, as an accepted procedure.
(b) Use as an approved alternative.
(c) See the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
3. Parts Modified and Reidentified:
None.
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
27 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 28

F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
28 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 29

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Refer to the Boeing Standard Wiring Practices Manuals 20-10-11 and 20-10-12 for
the wire installation procedures.
4. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
5. These work instructions refer to procedures included on other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
6. Hydraulic systems A, B, and standby must have pressure removed before
maintenance is done on the rudder control system. This is to prevent injury to persons
because of accidental operation of the control system while you do maintenance.
You must be careful to put maintenance stands and equipment away from control
surface travel.
B. WORK INSTRUCTIONS
1. Make sure that the hydraulic systems A, B, and standby have pressure removed. Refer to
737-600/700/800/900 AMM 27-21-00 as an accepted procedure.
2. Make sure that the electrical power is removed from the airplane. Refer to 737-600/700/800/900
AMM 24-22-00, as an accepted procedure. Use an independent power source for lighting.
3. Get access to the left forward rudder quadrant through the forward access door 112A. Refer to
737-600/700/800/900 AMM 06-41-00, as an accepted procedure.
4. Get access to the flight compartment.
5. Part 1: Wire Bundle W443 Inspection for damage.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
29 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 30

a. Push and hold the pilot's right rudder pedal fully to the travel stops.
b. Do a detail inspection of the wire bundle W443 for damage and measure for sufficient clearance
in accordance with Figure 1.
(1) If the wire bundle is not damaged and a minimum 0.5 inch clearance exists between the
forward rudder quadrant, then put the airplane back to a serviceable condition.
(2) If the wire bundle is not damaged and a 0.5 inch clearance does not exist between the
forward rudder quadrant, then do Part 2: Wire Bundle W443 Clearance Adjustment.
(3) If the wire bundle is damaged then repair in accordance with Part 3: Wire Bundle W443
Repair and Clearance Adjustment.
c. Slowly release the pilot's right rudder pedal fully.
6. Part 2: Wire Bundle W443 Clearance Adjustment.
a. Adjust the wire bundle clearance in accordance with Figure 2.
b. Push and hold the pilot's right rudder pedal fully to the travel stops. Make sure there is sufficient
clearance in accordance with Figure 2.
c. Slowly release the pilot's right rudder pedal fully.
d. Do the operational check that follows of the rudder control system.
(1) Push the pilot's right rudder pedal fully forward to the travel stops. Make sure the rudder
pedal travel is smooth and there is no evidence of interference, slowly release the rudder
pedal.
(2) Push the pilot's left rudder pedal fully forward to the travel stops. Make sure the rudder
pedal travel is smooth and there is no evidence of interference, slowly release the rudder
pedal.
e. Put the airplane back to a serviceable condition
7. Part 3: Wire Bundle W443 Repair and Clearance Adjustment.
a. Repair damaged wire bundle. Refer to SWPM 20-10-13, as an accepted procedure.
b. Adjust the wire bundle clearance in accordance with Part 2: Wire Bundle W443 Clearance
Adjustment.
c. Restore the electrical power to the airplane. Refer to 737-600/700/800/900 AMM 24-22-00,
as an accepted procedure.
d. Do a test of the applicable system that was repaired as necessary:
Control Column Check (if necessary)
(1) Do a check of the control column:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
30 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 31

(a) Move the control column full forward then full aft.
1) Make sure the control column operates correctly and smoothly.
(b) Turn the control wheel through full travel.
1) Make sure the control wheel operates correctly and smoothly.
Stabilizer Trim system test (if necessary)
(1) Make sure the circuit breakers that follow are closed on the P6-2 panel:
NameNumberColumnRow
FLIGHT CONTROL STAB TRIM CONTC0020710B
FLIGHT CONTROL STAB TRIM ACTUATORC0084010D
(2) Do a test of the stabilizer trim control switch on the control wheel:
(a) Move the STAB TRIM CUTOUT switch to the NORMAL position.
(b) Move the STAB TRIM switches to APL NOSE UP and then to APL NOSE DOWN.
(c) Make sure the stabilizer moves correctly.
Memory device lighting system test (if necessary)
(1) Make sure the circuit breakers that follow are closed on the P6-3 panel:
NameNumberColumnRow
PANEL & INSTR 28V PRI CAPT & CTRC003319B
PANEL & INSTR 28V PRI F/OC0033510B
(2) Do a test of the memory device lighting:
(a) At the P1 panel, set the CAPT'S AND CENTER PANEL LIGHTING CONTROL switch
to the dim position and then to the bright position.
1) Make sure the intensity of the light changes from dim to bright.
(b) Set the switch to the off position.
Autopilot disconnect system test (if necessary)
(1) Make sure the circuit breakers that follow are closed on the P18-1 panel:
NameNumberColumnRow
AFCS SYS A MACH TRIM ACC004564C
AFCS SYS A SNSR EXC ACC010415C
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
31 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 32

NameNumberColumnRow
AFCS SYS A WARN LIGHT (BAT)C010491D
AFCS SYS A FCC DCC010452D
AFCS SYS A ENGAGE INTLKC010483D
AFCS SYS A MACH TRIM DCC004574D
AFCS MCP DC 1C010445D
(2) Make sure the circuit breakers that follow are closed on the P6-2 panel:
NameNumberColumnRow
AFCS SYS B WARN LIGHT (BAT)C003741B
AFCS SYS B MACH TRIM DCC010642B
AFCS SYS B FCC DCC010463B
AFCS SYS B ENGAGE INTLKC007164B
AFCS SYS B MACH TRIM ACC010371C
AFCS SYS B SNSR EXC ACC010422C
AFCS MCP DC 2C010473C
(3) Make sure that the autopilot stab trim cutout switch, on the control stand, is in the NORMAL
position.
(4) Make sure that the VHF NAV and IRS switches, on the P5 forward overhead panel, are
in the NORMAL position.
(5) Set the left and right IRS switches, on the P5 overhead panel, to the ALIGN or NAV
position.
WARNING: KEEP PERSONS AND EQUIPMENT AWAY FROM THE FLIGHT CONTROL
SURFACES. THE AILERONS, ELEVATORS, RUDDER, FLAPS, SLATS,
SPOILERS, STABILIZER AND NOSE GEAR CAN MOVE SUDDENLY WHEN
YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS
AND DAMAGE TO EQUIPMENT.
(6) Supply hydraulic power to hydraulic systems A and B. Refer to 737-600/700/800/900
AMM 29-11-00, as an accepted procedure.
(7) Do a test of the autopilot disengage switch on the control wheel:
(a) Push the CMD A or CMD B autopilot engage switch on the mode control panel to
engage the autopilot.
1) Make sure that the CMD A or CMD B autopilot engage switch light comes on.
(b) Push the captain or first officer autopilot disengage switch on the control wheel to
disengage the autopilot.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
32 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 33

1) Make sure that the A/P warning lights flash.
2) Make sure that the A/P disengage warning sound comes on.
3) Push the captain or first officer autopilot disengage switch again.
a) Make sure that the A/P warning lights go off.
b) Make sure that there is no A/P disengage warning sound.
(8) Set the left and right IRS switches, on the P5 overhead panel, to the OFF position.
(9) Remove hydraulic power from hydraulic systems A and B. Refer to 737-600/700/800/900
AMM 29-11-00, as an accepted procedure.
Push-to-talk switches system test (if necessary)
(1) Make sure the circuit breakers that follow are closed on the P6-2 panel:
NameNumberColumnRow
INTERPHONE POWER F/O DC 2C0056021C
INTERPHONE POWER F/O BATC0056122C
INTERPHONE POWER CAPT DC 2C0023923C
INTERPHONE POWER CAPT BATC0024024C
AUDIO F/OC0008622D
AUDIO CAPTC0008323D
(2) Do an operational test of the PTT switch on the control wheel:
NOTE: The label for the microphone selector switch on the audio control panel (ACP)
is FLT INT or INT dependant on the ACP fitted to the airplane.
In the operational test that follows the microphone selector switch is referred to
as the INT microphone selector switch for either case.
(a) Push the INT microphone selector switch on the pilot's audio control panel (ACP) to
on.
(b) Push the volume control for the INT microphone selector switch.
(c) Turn the volume control for the INT microphone selector switch clockwise to the
middle position.
(d) Push the SPKR volume control switch to on.
(e) Turn the SPKR volume control switch clockwise to the middle position or to the
volume level you are comfortable with.
(f) Push and hold the PTT switch on the pilot's control wheel to the MIC position.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
33 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 34

(g) Speak into the pilot's boom microphone.
1) Make sure you hear the voice clearly on the headsets.
(h) Release the PTT switch.
1) Make sure the switch goes to the center (off) position.
(i) Push and hold the PTT switch on the pilot's control wheel to the INT position.
(j) Speak into the pilot's boom microphone.
1) Make sure you hear the voice clearly on the headsets.
(k) Release the PTT switch.
1) Make sure the switch goes to the center (off) position.
e. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1: June 14, 2010
34 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 35 (OCR)

BOEING SERVICE BULLETIN 737-27-1282
SEE A
LEFT FORWARD
RUDDER QUADRANT
SEE ®
WIRE BUNDLE
LEFT
W443
FORWARD
RUDDER
QUADRANT
FWD
FWD
LEFT
INBD  INBD  FORWARD
RUDDER
LBL 3.6  QUADRANT
NOT SHOWN  131
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
FIGURE 1: WIRE BUNDLE W443 INSPECTION FOR DAMAGE
(SHEET 1 OF 2)
Original Issue: March 15, 2007
Revision 1 June 14, 2010  BOEING PROPRIETARY -  737-27-1282
Copyright © Unpublished Work - See page 1 for details.  35 of 38

### Page 36

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
do a detail inspection for chafing or damage.
Refer to SWPM 20-10-06, as an accepted
procedure. (a)
-W443Wire BundleInspect1
for a minimum clearance of 0.5 inch from left
forward rudder quadrant full travel motion.
-W443Wire Bundle
Clearance
Measure2
(a) Check if there is damage to wire bundle protection sleeve, and/or damage to the wire jacket or insulation.
FIGURE 1: WIRE BUNDLE W443 INSPECTION FOR DAMAGE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1 June 14, 2010
36 of 38
BOEING SERVICE BULLETIN 737-27-1282

### Page 37 (OCR)

BOEING SERVICE BULLETIN 737-27-1282
SEE A
LEFT FORWARD
RUDDER QUADRANT
SEE ®
LEFT  WIRE BUNDLE
W443
FORWARD
RUDDER
QUADRANT
FWD  LACING TAPE
OR PLASTIC  ‚LEFT
TIE STRAPS  FWD  FORWARD
RUDDER
INBD  QUADRANT
LBL 3.6  INBD <  1319649
NOT SHOWN
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
FIGURE 2: WIRE BUNDLE W443 CLEARANCE ADJUSTMENT
(SHEET 1 OF 2)
Original Issue: March 15, 2007
Revision 1 June 14, 2010  BOEING PROPRIETARY -  737-27-1282
Copyright © Unpublished Work - See page 1 for details.  37 01 38

### Page 38

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
route as straight as possible.-W443Wire BundleAdjust1
Refer to SWPM 20-10-11 and SWPM 20-10-
12, as accepted procedures.
(a) (b) (c) (d)
to the adjacent wire bundles, as necessary.-W443Wire BundleRoute / At-
tach
2
Refer to SWPM 20-10-11 and SWPM 20-10-
19, as accepted procedures.
(b) (c) (d)
for a minimum clearance of 0.5 inch from left
forward rudder quadrant full travel motion.
-W443Wire Bundle
Clearance
Measure3
Minimize bend radius.(a)
Adjust wire bundle to make sure that contact is not made with any part that moves.(b)
Adjust wire bundle to increase the minimum clearance to 0.5 inch.(c)
Cut and install lacing tape (part number BMS 13-54 Type III) or install plastic tie straps (part number
BACS38K9), as an approved alternative, to hold wire bundle in position.
(d)
FIGURE 2: WIRE BUNDLE W443 CLEARANCE ADJUSTMENT
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: March 15, 2007
737-27-1282Revision 1 June 14, 2010
38 of 38
BOEING SERVICE BULLETIN 737-27-1282

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
