# Boeing Special Attention Service Bulletin 737-30-1058: U.S. DOT/FAA - Service Bulletin

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0032; AD 2013-26-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-30-1058](https://openairdocs.org/service-documents/boeing/sb-737-30-1058.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 36
- PDF: https://openairdocs.org/files/sha256/f7/ea/f7ea620da24e849e26e67608118a68d67a9ae0e0388cb4ce2481d82f4b636994
- Page: https://openairdocs.org/service-documents/boeing/sb-737-30-1058/file/f7ea620da24e

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-30-1058
Original Issue: July 27, 2006
Revision 3: July 07, 2010
ATA System: 3041
SUBJECT: ICE AND RAIN PROTECTION - Control Cabin Window Anti-Icing System - Coil Cord
Assembly Replacement on the Number 2 Windows in the Flight Compartment
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2006 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
1 of 36
2.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
2 of 36
BOEING SERVICE BULLETIN 737-30-1058
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 6
B. Concurrent Requirements ...................................... 1 6
C. Reason ................................................ 1 6
D. Description .............................................. 1 7
E. Compliance .............................................. 1 7
F. Approval ............................................... 1 7
G. Manpower .............................................. 1 8
H. Weight and Balance Changes .................................... 1 8
I. Electrical Load Data ......................................... 1 8
J. References .............................................. 1 8
1. Existing Data .......................................... 1 8
2. Data supplied with this Service Bulletin ............................ 1 8
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 8
K. Publications Affected ........................................ 1 9
L. Interchangeability and Intermixability of Parts ........................... 1 9
2. MATERIAL INFORMATION ........................................ 2 1
A. Material - Price and Availability ................................... 2 1
B. Industry Support Information .................................... 2 1
C. Parts Necessary For Each Airplane ................................. 2 1
1. Kits/Parts ............................................ 2 1
2. Parts and Materials Supplied by the Operator ........................ 2 2
3. Parts Modified and Reidentified ................................ 2 2
4. Parts Removed and Not Replaced .............................. 2 2
D. Parts Necessary to Change Spares ................................. 2 2
E. Special Tooling - Price and Availability ............................... 2 2
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 3
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 5
A. GENERAL INFORMATION ..................................... 2 5
B. WORK INSTRUCTIONS ....................................... 2 5
FIGURE 1: CAPTAIN'S SIDE - COIL CORD AND PANEL REMOVAL .................. 2 7
FIGURE 2: CAPTAIN'S SIDE - IDENTIFICATION TAPE INSTALLATION ................ 2 8
FIGURE 3: CAPTAIN'S SIDE - CONNECTOR KEYWAY INSPECTION ................. 2 9
FIGURE 4: CAPTAIN'S SIDE - RECLOCKING OF THE CONNECTOR KEYWAY ........... 3 0
FIGURE 5: CAPTAIN'S SIDE - COIL CORD AND PANEL INSTALLATION ............... 3 1
FIGURE 6: FIRST OFFICER'S SIDE - COIL CORD AND PANEL REMOVAL .............. 3 2
FIGURE 7: FIRST OFFICER'S SIDE - IDENTIFICATION TAPE INSTALLATION ............ 3 3
FIGURE 8: FIRST OFFICER'S SIDE - CONNECTOR KEYWAY INSPECTION ............. 3 4
FIGURE 9: FIRST OFFICER'S SIDE - RECLOCKING OF THE CONNECTOR KEYWAY ....... 3 5
FIGURE 10: FIRST OFFICER'S SIDE - COIL CORD AND PANEL INSTALLATION ........... 3 6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
3 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 4

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
4 of 36
BOEING SERVICE BULLETIN 737-30-1058
BLANK PAGE

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-30-1058Original Issue: July 27, 2006
Revision 3: July 07, 2010
ATA System: 3041
SUBJECT: ICE AND RAIN PROTECTION - Control Cabin Window Anti-Icing System - Coil Cord
Assembly Replacement on the Number 2 Windows in the Flight Compartment
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Boeing recommends that the change given in this service bulletin be done within 48 months after the Revision
3 date of this service bulletin.
No more work is necessary on airplanes changed in accordance with the original issue, Revision 1, or Revision
2 of this service bulletin.
REASON FOR REVISION
This revision is sent to notify operators that the Federal Aviation Administration (FAA) will possibly release an
Airworthiness Directive (AD) related to this service bulletin. The AD will make the compliance tasks and times
given in this service bulletin mandatory.
These sections were changed:
1. On the Summary page, in the Compliance paragraph, a compliance time was added to accomplish this
service bulletin.
2. In Paragraph 1.E., Compliance, added a compliance time to accomplish this service bulletin.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
July 27, 2006Original Issue:
June 18, 2007Revision 1:
February 13, 2009Revision 2:
July 07, 2010Revision 3:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
5 of 36

### Page 6

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
6 of 36
BOEING SERVICE BULLETIN 737-30-1058
BLANK PAGE

### Page 7

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-30-1058Original Issue: July 27, 2006
Revision 3: July 07, 2010
ATA System: 3041
SUBJECT: ICE AND RAIN PROTECTION - Control Cabin Window Anti-Icing System - Coil Cord
Assembly Replacement on the Number 2 Windows in the Flight Compartment
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Boeing received a report from an operator of arcing and smoke at the left number 2 window in the flight
compartment. An investigation showed the cause of this problem to be mechanical damage at the connector
backshell of the coil cord assembly. The new assembly will prevent mechanical damage which could cause a
fire in the flight compartment.
This service bulletin gives instructions to install a new coil cord assembly on the captain’s and first officer’s sides
of the number 2 windows in the flight compartment. This bulletin also gives instructions to inspect and reclock
the connector keyways if necessary.
Boeing Service Related Problem (SRP) 737-SRP-56-0017 is related to this service bulletin.
ACTION (PRR 38275-97)
Get access to the flight compartment. Do an inspection of the connector keyway’s orientation on both sides of
the coil cord located on the captain’s and first officer’s number 2 windows.
Reclock the connector keyway if necessary and replace the coil cord assembly.
Do the Window Heat Control Unit (WHCU) Test.
EFFECTIVITY
737-600, -700, -700C, -800, -900 Airplanes. See Service Bulletin Paragraph 1.A.1., Airplanes, for the list of
affected airplanes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
7 of 36

### Page 8

COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 48 months after the Revision
3 date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of August 8, 2005. Please refer to Paragraph
2.B., Industry Support Information.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
3.255.50Group 1
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
8 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-30-1058
Original Issue: July 27, 2006
Revision 3: July 07, 2010
ATA System: 3041
SUBJECT: ICE AND RAIN PROTECTION - Control Cabin Window Anti-Icing System - Coil Cord
Assembly Replacement on the Number 2 Windows in the Flight Compartment
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR38275-97 for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
Airplanes with one 90 degree and one straight connector backshell
installed on window number 2.
-1
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900
GroupVariable Number
1YA001 - YA099
1YA101 - YA199
1YA201 - YA211
1YA221
1YA231 - YA242
1YA251 - YA256
1YA271 - YA272
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
9 of 36

### Page 10

GroupVariable Number
1YA291
1YA301 - YA302
1YA311 - YA314
1YA321 - YA323
1YA336 - YA345
1YA351
1YA356 - YA357
1YA366 - YA367
1YA371 - YA377
1YA501 - YA536
1YA541 - YA552
1YA571 - YA578
1YA601 - YA615
1YA621 - YA622
1YA626 - YA631
1YA635 - YA636
1YA641 - YA642
1YA645 - YA650
1YA656 - YA659
1YA666 - YA667
1YA671 - YA672
1YA681 - YA691
1YA701 - YA710
1YA721 - YA722
1YA731 - YA734
1YA751 - YA756
1YA801 - YA803
1YA809
1YA811 - YA814
1YA831 - YA835
1YA841 - YA862
1YA881 - YA882
1YA891 - YA892
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
10 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 11

GroupVariable Number
1YA961 - YA977
1YB001 - YB006
1YB101 - YB132
1YB151 - YB153
1YB156 - YB158
1YB161 - YB164
1YB171 - YB172
1YB181 - YB184
1YB201 - YB208
1YB271
1YB276
1YB301 - YB310
1YB371 - YB390
1YB501 - YB502
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB579
1YB581 - YB596
1YB601 - YB632
1YB651
1YB656
1YB851 - YB863
1YB871 - YB874
1YB881 - YB890
1YB901 - YB903
1YB911
1YB961 - YB964
1YC001 - YC030
1YC051 - YC083
1YC091 - YC094
1YC101 - YC104
1YC111 - YC113
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
11 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 12

GroupVariable Number
1YC121
1YC126 - YC127
1YC136 - YC141
1YC146 - YC147
1YC151 - YC156
1YC166 - YC171
1YC176 - YC178
1YC186 - YC189
1YC201 - YC203
1YC206 - YC207
1YC301 - YC305
1YC321 - YC387
1YC391 - YC394
1YC396
1YC401 - YC417
1YC421 - YC422
1YC426 - YC428
1YC436 - YC437
1YC441 - YC448
1YC451 - YC455
1YC459
1YC461 - YC467
1YC471 - YC499
1YC501 - YC526
1YC571 - YC583
1YC587 - YC589
1YC591 - YC593
1YC601 - YC655
1YC681 - YC696
1YC701 - YC715
1YC720 - YC725
1YC727 - YC742
1YC751 - YC752
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
12 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 13

GroupVariable Number
1YC761 - YC770
1YC781 - YC793
1YC801 - YC892
1YC901 - YC907
1YC921 - YC922
1YC931 - YC932
1YC941 - YC951
1YC971 - YC978
1YC981 - YC983
1YD001 - YD007
1YD021 - YD025
1YD041 - YD057
1YD081 - YD084
1YD101 - YD110
1YD121 - YD126
1YD151 - YD159
1YD171 - YD172
1YD201 - YD203
1YD206 - YD209
1YD216 - YD219
1YD251 - YD254
1YD256 - YD257
1YD261
1YD301 - YD334
1YD391
1YD401 - YD410
1YD412 - YD414
1YD481 - YD485
1YD491 - YD494
1YD501 - YD512
1YD531 - YD535
1YD541 - YD547
1YD561 - YD564
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
13 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 14

GroupVariable Number
1YD571 - YD572
1YD591 - YD595
1YD601 - YD612
1YD651 - YD655
1YE001 - YE020
1YE051
1YE101 - YE109
1YE151 - YE157
1YE171 - YE172
1YE201 - YE206
1YE301 - YE305
1YE321 - YE326
1YE371 - YE378
1YG001 - YG044
1YG061 - YG064
1YG066 - YG089
1YG091 - YG096
1YG101
1YG201 - YG204
1YG211 - YG213
1YG501 - YG509
1YG601 - YG602
1YJ001 - YJ005
1YJ011 - YJ013
1YJ021
1YJ471 - YJ480
1YJ501 - YJ517
1YJ531 - YJ552
1YJ591 - YJ594
1YJ631 - YJ632
1YJ671 - YJ685
1YJ690 - YJ692
1YJ801 - YJ867
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
14 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 15

GroupVariable Number
1YJ871
1YJ901 - YJ902
1YJ911 - YJ928
1YJ931 - YJ936
1YJ941 - YJ947
1YK001 - YK007
1YK101 - YK104
1YK111 - YK112
1YK121 - YK122
1YK131 - YK132
1YK136 - YK137
1YK141 - YK142
1YK146 - YK147
1YK151 - YK154
1YK301 - YK305
1YK321 - YK331
1YK361 - YK369
1YK401 - YK406
1YK426 - YK427
1YK431 - YK435
1YK456 - YK460
1YK476
1YK480 - YK484
1YK511 - YK514
1YK551 - YK560
1YK571
1YK601 - YK602
1YK611 - YK613
1YK621 - YK622
1YK631
1YK641 - YK642
1YK701 - YK707
1YK721
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
15 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 16

GroupVariable Number
1YK801 - YK818
1YK901 - YK906
1YK941
1YL001 - YL003
1YL011
1YM101 - YM103
1YM201 - YM210
1YM251 - YM292
1YM471
1YM481 - YM484
1YM501 - YM507
1YM521 - YM522
1YM541
1YM551 - YM553
1YM571 - YM572
1YM591 - YM592
1YN001 - YN005
1YN061
1YN101 - YN105
2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C. for
the recommended use.
B. Concurrent Requirements
None.
C. Reason
Boeing received a report from an operator of arcing and smoke at the left number 2 window in the flight
compartment. An investigation showed the cause of this problem to be mechanical damage at the
connector backshell of the coil cord assembly. The new assembly will prevent mechanical damage
which could cause a fire in the flight compartment.
This service bulletin gives instructions to install a new coil cord assembly on the captain’s and first
officer’s sides of the number 2 windows in the flight compartment. This bulletin also gives instructions
to inspect and reclock the connector keyways if necessary.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
16 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 17

Revision 2 is sent to change the illustrations in Figures 2 and 7 to show the correct station (STA)
locations for the coil cord connectors.
Boeing Service Related Problem (SRP) 737-SRP-56-0017 is related to this service bulletin.
Revision 3 is sent to notify operators that the change in this service bulletin must be done within 48
months after the Revision 3 date of this service bulletin.
D. Description
Revision 2: No more work is necessary on airplanes changed as shown in the original issue or Revision
1 of this service bulletin.
Revision 3: No more work is necessary on airplanes changed in accordance with the original issue,
Revision 1, or Revision 2 of this service bulletin.
Get access to the flight compartment. Do an inspection of the connector keyway’s orientation on both
sides of the coil cord located on the captain’s and first officer’s number 2 windows.
Reclock the connector keyway if necessary and replace the coil cord assembly.
Do the Window Heat Control Unit (WHCU) Test.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
211, 212737-600, 737-700, 737-700C,
737-800, 737-900
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 48 months after the
Revision 3 date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
17 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 18

G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
Elapsed HoursTask HoursNumber of Per-
sons
Task
0.250.251Open Access
0.250.251Inspect
2.254.502Change
0.250.251Close Access
0.250.251Test
3.255.50TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR38275-97
b. Service Related Problem (SRP) 737-SRP-56-0017
c. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) Subject 24-22-00, 30-41-11
d. Boeing Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
18 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 19

K. Publications Affected
1. Publications:
Chapter-SectionPublication
30-41737 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability
information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
19 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 20

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
20 of 36
BOEING SERVICE BULLETIN 737-30-1058
BLANK PAGE

### Page 21

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kit shown in Paragraph 2.C., Parts Necessary for Each Airplane as shown below.
Kit availability is shown in the Reorder Lead Time (ROLT). ROLT is calculated from the date Boeing
gets the purchase order.
Unit Price thru DEC
31/09
ROLT
(Weeks)
NameKit Number
$1,608.0015Top Kit, No. 2 Window Heat Coil
Cord Assembly
012A0061-1
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of August 8, 2005. For task
hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits for airplanes in warranty as of that date will be
supplied at no charge. Send a purchase order for the kits to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable numbers in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane.
Kit 012A0061 - Top Kit, No. 2 Window Heat Coil Cord Assembly
NotesExisting Part
Number
NameQTYNew Part Number
-1
Top Kit, No. 2 Win-
dow Heat Coil Cord
Assembly
-012A0061-1
Wire Kit, No. 2 Win-
dow Heat Coil Cord
Assembly
1280A3135-1
(a) (b)S280T007-1
(286A2006-001)
Coil Cord2S280A100-1 (ABC
57021)
(a) Discard the existing part.
(b) ABC 57021 is the vendor part number for S280A100-1.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
21 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 22

Kit 280A3135 - Wire Kit, No. 2 Window Heat Coil Cord Assembly
NotesNameQTYNew Part Number
-1-101-102
Wire Kit, No. 2 Win-
dow Heat Coil Cord
Assembly
-..280A3135-1
Right No. 2 Window
Heat Coil Cord As-
sembly
1-280A3135-101
Left No. 2 Window
Heat Coil Cord As-
sembly
1.-280A3135-102
(a)Connector Identifica-
tion Tape. Identified
as D10572.
.1.280A3135-10101
(a)Connector Identifica-
tion Tape. Identified
as D10564.
.1.280A3135-10102
(a)Connector Identifica-
tion Tape. Identified
as D10572.
..1280A3135-10201
(a)Connector Identifica-
tion Tape. Identified
as D10568.
..1280A3135-10202
(a) Make from BACT19C-T or BACT19CT.
2. Parts and Materials Supplied by the Operator
None.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
22 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 23

F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
23 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 24

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
24 of 36
BOEING SERVICE BULLETIN 737-30-1058
BLANK PAGE

### Page 25

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
4. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
5. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
B. WORK INSTRUCTIONS
1. Remove electrical power from the airplane. Refer to 737-600/700/800/900 AMM 24-22-00 as an
accepted procedure.
2. Get access to the flight compartment.
3. Remove the coil cord and panels on the captain's side of the flight compartment in accordance
with Figure 1.
4. Install the identification tapes on the W2004 and W2208 wire bundles on the captain's side of the
flight compartment in accordance with Figure 2.
5. Inspect the orientation of the connector keyways on the captain's side of the flight compartment
in accordance with Figure 3.
a. If the orientation is not set at 12 o'clock, reclock the connector keyway in accordance with
Figure 4.
b. If the orientation is set at 12 o'clock, no change to the keyway is necessary.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
25 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 26

6. Install the new coil cord and panels on the captain's side of the flight compartment in accordance
with Figure 5.
7. Remove the coil cord and panels on the first officer's side of the flight compartment in accordance
with Figure 6.
8. Install the identification tapes on the W2004 and W2108 wire bundles on the first officer's side of
the flight compartment in accordance with Figure 7.
9. Inspect the orientation of the connector keyways on the first officer's side of the flight compartment
in accordance with Figure 8.
a. If the orientation is not set at 12 o'clock, reclock the connector keyway in accordance with
Figure 9.
b. If the orientation is set at 12 o'clock, no change to the keyway is necessary.
10. Install the new coil cord and panels on the first officer's side of the flight compartment in accordance
with Figure 10.
11. Restore electrical power removed in Step 1. Refer to 737-600/700/800/900 AMM 24-22-00 as an
accepted procedure.
12. Do the Window Heat Control Unit (WHCU) test in accordance with 737-600/700/800/900 AMM
30-41-11 as an accepted procedure.
13. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3: July 07, 2010
26 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 27

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for airplane.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-S280T007-1
(286A2006-001)
Coil CordRemove1
-232A1521-( )Left Panel - No. 3 Win-
dow
Remove / Keep2
-232A1520-( )Lower Cover AssemblyRemove / Keep3
FIGURE 1: CAPTAIN'S SIDE - COIL CORD AND PANEL REMOVAL
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
27 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 28 (OCR)

BOEING SERVICE BULLETIN 737-30-1058
DISC  DISC
STA 230  STA 249
+ W2004-5501-20  /+ W2006-2001K-20 +1  - W2208-1003-20 -
+W2004-1001-20-0  RB1  1W2006-2001W-20 +77  - W2208-1004-20 RB1
1W2004-5502-20  R/ +0114W2006-10026-24+1  W2208-2001B-20 -
+W2004-5503-20  N1+0 D++W2006-1001R-24+1  W2208-2001R-20 -
D10572  D10570
D10562 D10568 2
3
RB1
4  4
2  2
1
5
D10572  D10568
M2675 COIL CORD ASSY
REFERENCE: WIRING DIAGRAM 30-41-11
ADDED WIRE OR NEW ROUTING
/ DELETED WIRE OR FORMER ROUTING
EXISTING WIRE
FLAG
NOTE  NAME  IDENTIFICATION  QTY  MORE DATA
1  Connector Identification  280A3135-10201  Imprinted "D10572 MW M2675".
Tape
2  Connector Identification  280A3135-10202  Imprinted "D10568 M/W M2675".
Tape
FIGURE 2: CAPTAIN'S SIDE - IDENTIFICATION TAPE INSTALLATION
(SHEET 1 OF 1)
Original Issue: July 27, 2006
Revision 3 July 07, 2010  Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  737-30-1058  28 of 36

### Page 29

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1D10572Connector KeywayInspect1
1D10568Connector KeywayInspect2
FIGURE 3: CAPTAIN'S SIDE - CONNECTOR KEYWAY INSPECTION
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
29 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 30

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to SWPM 20-
10-11 as an accept-
ed procedure. (a)
2D10572, D10568Connector KeywayAdjust1
(a) The keyway should be oriented at the 12 o'clock position.
FIGURE 4: CAPTAIN'S SIDE - RECLOCKING OF THE CONNECTOR KEYWAY
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
30 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 31

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1232A1520-( )Lower Cover AssemblyInstall (Kept)1
1232A1521-( )Left Panel - No. 3 Win-
dow
Install (Kept)2
1280A100-1 (ABC
57021)
Coil CordInstall (New)3
FIGURE 5: CAPTAIN'S SIDE - COIL CORD AND PANEL INSTALLATION
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
31 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 32

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1S280T007-1
(286A2006-001)
Coil CordRemove1
1232A1521-( )Left Panel - No. 3 Win-
dow
Remove / Keep2
1232A1520-( )Lower Cover AssemblyRemove / Keep3
FIGURE 6: FIRST OFFICER'S SIDE - COIL CORD AND PANEL REMOVAL
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
32 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 33 (OCR)

BOEING SERVICE BULLETIN 737-30-1058
DISC  DISC
STA 230  STA 249
- W2004-5501-20  7/ W2006-2001K-20 +  • W2108-1003-20-
- W2004-1001-20-0  LA1  4A w2006-2001W-20+1171  - W2108-1004-20 -A1
1W2004-5502-20  */ W2006-1002G-24 +/F  - W2108-2001B-20 -
1W2004-5503-20  1+0D++W2006-1001R-24+11  • W2108-2001R-20
D10572  D10570
D10562 D10564
LA1
2
D10572  D10564
M2675 COIL CORD ASSY
REFERENCE: WIRING DIAGRAM 30-41-11
ADDED WIRE OR NEW ROUTING
/ DELETED WIRE OR FORMER ROUTING  U84491
EXISTING WIRE
FLAG
NOTE  NAME  IDENTIFICATION  QTY  MORE DATA
1  Connector Identification  280A3135-10101  1  Imprinted "D10572 MW M2675".
Tape
2  Connector Identification  280A3135-10102  1  Imprinted "D10564 MW M2675".
Tape
FIGURE 7: FIRST OFFICER'S SIDE - IDENTIFICATION TAPE INSTALLATION
(SHEET 1 OF 1)
Original Issue: July 27, 2006
Revision 3 July 07, 2010  BOEING PROPRIETARY -  737-30-1058
Copyright © Unpublished Work - See page 1 for details.  33 of 36

### Page 34

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1D10572Connector KeywayInspect1
1D10564Connector KeywayInspect2
FIGURE 8: FIRST OFFICER'S SIDE - CONNECTOR KEYWAY INSPECTION
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
34 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 35

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Refer to SWPM 20-
10-11 as an accept-
ed procedure. (a)
2D10572, D10564Connector KeywayAdjust1
(a) The keyway should be oriented at the 12 o'clock position.
FIGURE 9: FIRST OFFICER'S SIDE - RECLOCKING OF THE CONNECTOR KEYWAY
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
35 of 36
BOEING SERVICE BULLETIN 737-30-1058

### Page 36

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1232A1520-( )Lower Cover AssemblyInstall (Kept)1
1232A1521-( )Left Panel - No. 3 Win-
dow
Install (Kept)2
1S280A100-1 (ABC
57021)
Coil CordInstall (New)3
FIGURE 10: FIRST OFFICER'S SIDE - COIL CORD AND PANEL INSTALLATION
(SHEET 1 OF 1)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: July 27, 2006
737-30-1058Revision 3 July 07, 2010
36 of 36
BOEING SERVICE BULLETIN 737-30-1058

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
