# Boeing Special Attention Service Bulletin 737-33-1146: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0863; AD 2014-13-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-33-1146](https://openairdocs.org/service-documents/boeing/sb-737-33-1146.md)
- Title as filed: Boeing - Service Bulletin
- Pages: 78
- PDF: https://openairdocs.org/files/sha256/4f/97/4f970ff30bd9dda28c9f40898b32858d5bef10ec548c67615c39f8a2689e71f9
- Page: https://openairdocs.org/service-documents/boeing/sb-737-33-1146/file/4f970ff30bd9

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-33-1146
Original Issue: November 02, 2011
ATA System: 3340
SUBJECT: LIGHTS - Strobe Position Lights - Lightning Protection of the Tail Strobe Light system
wiring
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
1 of 78
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
2 of 78
BOEING SERVICE BULLETIN 737-33-1146
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 2 3
B. Concurrent Requirements ...................................... 2 3
C. Reason ................................................ 2 3
D. Description .............................................. 2 3
E. Compliance .............................................. 2 4
F. Approval ............................................... 2 4
G. Manpower .............................................. 2 5
H. Weight and Balance Changes .................................... 2 7
I. Electrical Load Data ......................................... 2 8
J. References .............................................. 2 8
1. Existing Data .......................................... 2 8
2. Data supplied with this Service Bulletin ............................ 2 8
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 8
K. Publications Affected ........................................ 2 8
L. Interchangeability and Intermixability of Parts ........................... 2 9
2. MATERIAL INFORMATION ........................................ 3 1
A. Material - Price and Availability ................................... 3 1
B. Industry Support Information .................................... 3 2
C. Parts Necessary For Each Airplane ................................. 3 2
1. Kits/Parts ............................................ 3 2
2. Parts and Materials Supplied by the Operator ........................ 3 6
3. Parts Modified and Reidentified ................................ 3 6
4. Parts Removed and Not Replaced .............................. 3 7
D. Parts Necessary to Change Spares ................................. 3 7
E. Special Tooling - Price and Availability ............................... 3 7
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 7
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 9
A. GENERAL INFORMATION ..................................... 3 9
B. WORK INSTRUCTIONS ....................................... 4 0
FIGURE 1: REMOVE THE TAIL ANTI-COLLISION LIGHT ASSEMBLY [Group 1, 3] .......... 4 2
FIGURE 2: REMOVE THE TAIL ANTI-COLLISION LIGHT ASSEMBLY [Group 2] ........... 4 4
FIGURE 3: INSTALLATION OF NEW DISCONNECT BRACKET AT THE STA 1156 BULKHEAD [Group 1,
Configuration 1; Group 3] ................................... 4 6
FIGURE 4: INSTALLATION OF NEW DISCONNECT BRACKET AT THE STA 1156 BULKHEAD [Group 1,
Configuration 2] ......................................... 4 8
FIGURE 5: REMOVAL OF SGLA DISCONNECT BRACKET AT STA 1156 BULKHEAD [Group 2] . . 50
FIGURE 6: INSTALLATION OF NEW DISCONNECT BRACKET AT STA 1156 BULKHEAD [Group 2] . 52
FIGURE 7: WIRE ROUTING FOR WIRE BUNDLE W4724 AND INSTALLATION OF CLAMP [Group 1-2]
.................................................. 5 4
FIGURE 8: WIRE CHANGE FOR WIRE BUNDLE W4724 [Group 1-2] ................. 5 6
FIGURE 9: WIRE ROUTING FOR WIRE BUNDLE W5726 AND INSTALLATION OF CLAMP [Group 3] . 58
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
3 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 4

FIGURE 10: WIRE CHANGE FOR WIRE BUNDLE W5726 [Group 3] ................... 6 0
FIGURE 11: WIRE ROUTING FOR WIRE BUNDLE W7150 ........................ 6 3
FIGURE 12: WIRE CHANGE FOR WIRE BUNDLE W7150 ........................ 6 4
FIGURE 13: WIRE ROUTING FOR WIRE BUNDLE W7152 AND INSTALLATION OF POTTED INSERT
AND SPACERS ........................................ 6 5
FIGURE 14: WIRE CHANGE FOR WIRE BUNDLE W7152 ........................ 6 8
FIGURE 15: INSTALLATION AND BONDING RESISTANCE CHECK FOR THE TAIL STROBE LIGHT
HOUSING ASSEMBLY, THE TAIL CONE FAIRING ASSEMBLIES, AND THE L46 LIGHT
CONNECTOR PLUG [Group 1, 3] ............................... 6 9
FIGURE 16: INSTALLATION AND BONDING RESISTANCE CHECK FOR THE TAIL STROBE LIGHT
HOUSING ASSEMBLY, THE TAIL CONE FAIRING ASSEMBLIES, AND THE L46 LIGHT
CONNECTOR PLUG [Group 2] ................................ 7 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
4 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-33-1146Original Issue: November 02, 2011
ATA System: 3340
SUBJECT: LIGHTS - Strobe Position Lights - Lightning Protection of the Tail Strobe Light system
wiring
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
The tail strobe light, located at the aft end of section 48, is not electrically bonded to a primary structure in the
airplane. In case of a direct lightning strike to the tail strobe light, electromagnetic coupling and large transient
voltages can be transmitted into the pressure vessel and couple to wires of the airplane systems that are routed
with the light wires. Those large transient voltages can possibly cause damage to the operation of the airplane's
electrical systems and avionics equipment. In addition to electromagnetic coupling, electrical current on the tail
strobe light system wiring could create an ignition source. This service bulletin will add lightning protection to
the tail strobe light system wiring and minimize potential fire hazard created by induced electrical current. This
is done by adding 2 electrical ground paths. The primary ground path passes through the APU exhaust system
to the airplane metal structure. The secondary ground path passes through the added wire bundle shields to
ground any transient voltages. The electrical bonding will prevent the effects of lightning strikes to the airplane
system. If the change in this service bulletin is not done, a direct lightning strike to the tail strobe light can cause
damage to the operation of the airplane's systems.
This service bulletin gives the instructions and a kit of parts to change the tail strobe light installation and wiring.
Boeing Service Related Problem (SRP) 737NG-SRP-33-0052 is related to this service bulletin.
ACTION (PRR 38275-138S)
At the aft end of the airplane, remove the tail strobe light L46 and replace the light housing. Drill holes on the
new light housing. Install the light housing and tail strobe light L46.
In the tail cone area, install a new STA 1156 bulkhead disconnect bracket. Install the new wire bundle W7152
that runs from the tail strobe light to the new disconnect bracket and install a potted insert and spacers on the
tail cone wall to hold the new wire bundle.
Make wiring changes to wire bundles W4724, W5726, and W7150 to remove the tail strobe light wires.
Measure the electrical bonding of the new STA 1156 bulkhead disconnect bracket and the new connector
D44582.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
5 of 78

### Page 6

Measure the electrical bonding of the tail strobe light, the light housing and aft fairing to make sure of the correct
resistance.
Do an operational test of tail strobe light L46 to make sure the light operates correctly.
EFFECTIVITY
All 737-600/-700/-700C/-800/-900/-900ER Airplane(s). Refer to Paragraph 1.A.1., Airplanes, for the list of affected
airplane(s).
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 72 months after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of November 6, 2007. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Elapsed HoursTotal Task HoursAirplanes
16.5519.05Group 1 Configu-
ration 1
16.5519.05Group 1 Configu-
ration 2
17.8018.55Group 2
15.8518.35Group 3
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
6 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 7 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
- INSTALL NEW POTTED
INSERT, SPACERS, AND
CLAMPS
-INSTALL NEW WIRE
BUNDLE W7152  -INSTALL NEW BRACKET
-BOND AND MEASURE
BETWEEN BRACKET AND
STIFFENER
- INSTALL NEW
HOUSING
-BOND AND MEASURE
BETWEEN SURFACES
FOR THE TAILSTROBE
ASSEMBLY, TAILSTROBE
LIGHT HOUSING ASSEMBLY
AND AFT FAIRING ASSEMBLY
FWD
-MAKE CHANGES
TO WIRE BUNDLES
W4724, W5726,
AND W7150
2054541
Original Issue: November 02, 2011
737-33-1146
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  7 of 78

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
8 of 78
BOEING SERVICE BULLETIN 737-33-1146
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-33-1146
Original Issue: November 02, 2011
ATA System: 3340
SUBJECT: LIGHTS - Strobe Position Lights - Lightning Protection of the Tail Strobe Light system
wiring
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 38275-138S for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
All 737-600/-700/-700C/-800/-900/-900ER airplanes from line number
1 through 3060 except airplanes with effectivities YA001-YA013,
YA201-YA203, YA231-YA240, YA251-YA252, YA271-YA271,
YA301-YA302, YA311-YA312, YA501-YA508, YC001-YC007,
YC051-YC052, YC071-YC072, YC101-YC101, YC301-YC301,
YC321-YC322 and YE001-YE003.
-1
Airplanes with a non-integrated bulkhead installed at STA 1156.1
Airplanes with an integrated bulkhead installed at STA 1156.2
All 737-700/-700C/-800/-900ER airplanes from line numbers 3061
through 3469.
-2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
9 of 78

### Page 10

DESCRIPTIONCONFIGURATIONGROUP
737-600/-700/-800 airplanes with effectivities YA001-YA013,
YA201-YA203, YA231-YA240, YA251-YA252, YA271-YA271,
YA301-YA302, YA311-YA312, YA501-YA508, YC001-YC007,
YC051-YC052, YC071-YC072, YC101-YC101, YC301-YC301,
YC321-YC322 and YE001-YE003.
-3
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER
GroupVariable Number
3YA001 - YA013
1YA014 - YA099
1YA101 - YA199
3YA201 - YA203
1YA204 - YA211
1YA221
3YA231 - YA240
1YA241 - YA242
3YA251 - YA252
1YA253 - YA256
3YA271
1YA272
1YA291
3YA301 - YA302
3YA311 - YA312
1YA313 - YA314
1YA321 - YA323
1YA336 - YA345
1YA351
1YA356 - YA357
1YA366 - YA367
1YA371 - YA377
3YA501 - YA508
1YA509 - YA536
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
10 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 11

GroupVariable Number
1YA541 - YA552
1YA571 - YA578
1YA601 - YA615
1YA621 - YA622
1YA626 - YA631
1YA635 - YA636
1YA641 - YA642
1YA645 - YA650
1YA656 - YA659
1YA666 - YA667
1YA671 - YA672
1YA681 - YA691
1YA701 - YA710
1YA721 - YA722
1YA731 - YA734
1YA751 - YA756
1YA801 - YA803
1YA809
1YA811 - YA814
1YA831 - YA835
1YA841 - YA862
1YA881 - YA882
1YA891 - YA892
1YA961 - YA978
1YB001 - YB006
1YB101 - YB132
1YB151 - YB153
1YB156 - YB158
1YB161 - YB164
1YB171 - YB172
1YB181 - YB184
1YB201 - YB208
1YB271
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
11 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 12

GroupVariable Number
1YB276
1YB301 - YB310
1YB371 - YB392
1YB501 - YB502
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB598
1YB601 - YB633
2YB634 - YB635
1YB651
1YB656
1YB671 - YB672
1YB851 - YB863
1YB871 - YB874
1YB881 - YB893
1YB901 - YB903
1YB911
1YB961 - YB974
1YB986 - YB989
2YB990 - YB996
3YC001 - YC007
1YC008 - YC030
3YC051 - YC052
1YC053 - YC070
3YC071 - YC072
1YC073 - YC084
1YC091 - YC095
3YC101
1YC102 - YC104
1YC111 - YC113
1YC121
1YC126 - YC127
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
12 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 13

GroupVariable Number
1YC136 - YC141
1YC146 - YC147
1YC151 - YC156
1YC166 - YC171
1YC176 - YC179
1YC186 - YC190
1YC201 - YC203
1YC206 - YC207
3YC301
1YC302 - YC305
3YC321 - YC322
1YC323 - YC387
1YC391 - YC394
1YC396
1YC401 - YC417
1YC421 - YC422
1YC426 - YC428
1YC436 - YC439
1YC441 - YC448
1YC451 - YC455
1YC459
1YC461 - YC467
1YC471 - YC499
1YC501 - YC526
1YC571 - YC583
1YC587 - YC589
1YC591 - YC593
1YC601 - YC655
1YC681 - YC696
1YC701 - YC715
1YC720 - YC725
1YC727 - YC752
1YC761 - YC770
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
13 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 14

GroupVariable Number
1YC781 - YC793
1YC801 - YC892
1YC901 - YC907
1YC921 - YC922
1YC931 - YC932
1YC941 - YC951
1YC971 - YC978
1YC981 - YC983
1YD001 - YD007
1YD021 - YD025
1YD041 - YD057
1YD081 - YD084
1YD101 - YD110
2YD111 - YD112
1YD121 - YD126
1YD151 - YD159
1YD171 - YD172
1YD201 - YD203
1YD206 - YD209
1YD216 - YD219
1YD251 - YD254
1YD256 - YD257
1YD261
1YD301 - YD334
1YD391
1YD401 - YD410
1YD412 - YD416
2YD417
1YD481 - YD485
1YD491 - YD499
1YD501 - YD512
1YD531 - YD535
1YD541 - YD547
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
14 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 15

GroupVariable Number
1YD561 - YD564
1YD571 - YD572
1YD591 - YD595
1YD601 - YD612
1YD651 - YD655
3YE001 - YE003
1YE004 - YE020
1YE051
1YE101 - YE109
1YE151 - YE157
1YE171 - YE172
1YE201 - YE206
1YE301 - YE305
1YE321 - YE326
1YE371 - YE383
1YF001 - YF006
2YF007 - YF011
1YF021 - YF035
2YF036 - YF049
1YF051 - YF058
2YF059 - YF063
1YF086
1YF106 - YF107
1YF111 - YF114
1YF116
2YF117 - YF118
2YF121 - YF127
1YF176 - YF178
1YF191
2YF192
1YF201 - YF221
2YF222 - YF271
1YF401 - YF402
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
15 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 16

GroupVariable Number
2YF431 - YF432
2YF441 - YF442
1YF451 - YF452
2YF453 - YF460
1YF501 - YF541
2YF542 - YF596
1YF701 - YF703
2YF704 - YF707
1YF801
2YF802 - YF803
1YF831
2YF832
2YF836 - YF838
2YF901 - YF905
2YF921 - YF927
2YF951
1YG001 - YG044
1YG061 - YG064
1YG066 - YG089
1YG091 - YG099
1YG101 - YG103
1YG111 - YG114
1YG116 - YG123
2YG124 - YG128
1YG201 - YG205
1YG211 - YG214
1YG221
2YG222 - YG224
1YG251 - YG252
1YG501 - YG509
2YG510 - YG511
1YG601 - YG602
1YG701
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
16 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 17

GroupVariable Number
1YG711
1YH001 - YH012
1YH031 - YH040
2YH041 - YH050
1YH051 - YH055
2YH071 - YH077
1YH101 - YH130
2YH131 - YH132
1YH201 - YH202
1YH206 - YH207
1YH301 - YH304
2YH305 - YH306
1YH321 - YH322
1YJ001 - YJ013
1YJ021
1YJ471 - YJ480
1YJ501 - YJ517
1YJ531 - YJ570
2YJ571 - YJ579
1YJ591 - YJ599
1YJ631 - YJ632
1YJ671 - YJ694
1YJ801 - YJ867
1YJ871 - YJ879
2YJ880
1YJ901 - YJ904
1YJ908 - YJ929
1YJ931 - YJ937
1YJ941 - YJ956
2YJ961
1YJ976 - YJ977
1YK001 - YK007
1YK101 - YK104
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
17 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 18

GroupVariable Number
1YK111 - YK112
1YK121 - YK122
1YK131 - YK133
1YK136 - YK139
1YK141 - YK142
1YK146 - YK148
1YK151 - YK154
1YK161 - YK167
1YK171
1YK176 - YK177
1YK186
1YK191
1YK196
1YK201 - YK202
1YK301 - YK312
2YK313 - YK314
1YK321 - YK340
1YK361 - YK378
1YK401 - YK406
1YK426 - YK427
1YK431 - YK450
1YK456 - YK463
2YK464 - YK467
2YK471 - YK473
1YK476
1YK480 - YK487
2YK491
1YK495 - YK496
2YK497 - YK498
1YK511 - YK516
1YK521 - YK529
2YK530
1YK551 - YK571
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
18 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 19

GroupVariable Number
1YK576 - YK577
1YK580 - YK585
1YK601 - YK602
1YK606 - YK607
1YK611 - YK616
1YK621 - YK634
1YK641 - YK644
1YK651 - YK663
2YK664 - YK665
1YK671 - YK672
1YK676 - YK677
1YK681 - YK686
1YK691
1YK701 - YK713
1YK716 - YK719
1YK721 - YK741
1YK751 - YK769
2YK770
2YK776 - YK778
2YK781 - YK783
1YK791 - YK792
1YK796 - YK797
1YK801 - YK899
1YK901 - YK912
1YK918 - YK919
1YK921 - YK927
1YK941 - YK955
2YK956 - YK958
1YK961 - YK974
2YK975 - YK980
1YK981 - YK991
2YK992 - YK994
1YL001 - YL005
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
19 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 20

GroupVariable Number
1YL011 - YL016
1YL021 - YL024
1YL051 - YL052
1YL056 - YL057
1YL061
1YL066 - YL069
1YL076 - YL077
1YL101 - YL130
2YL131 - YL134
1YL201 - YL214
2YL215 - YL224
1YL271 - YL272
1YL281 - YL284
1YL301 - YL303
1YL311 - YL312
2YL313 - YL314
1YL316 - YL320
2YL321
1YL351 - YL353
1YL371 - YL374
1YL401
1YL421 - YL429
1YL431 - YL441
2YL442 - YL444
1YL461 - YL477
2YL478
1YL501 - YL509
1YL531 - YL534
1YL541 - YL544
1YL561 - YL568
1YL591 - YL592
2YL593 - YL598
1YL601 - YL606
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
20 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 21

GroupVariable Number
1YL611 - YL612
1YL616 - YL617
1YL621
1YL626
1YL631 - YL632
2YL633 - YL634
2YL636 - YL637
1YL661 - YL664
1YL676 - YL681
1YL691
2YL701 - YL706
1YL731
2YL751 - YL752
2YL756
1YL761
2YL762 - YL779
2YL796
2YL801 - YL813
1YL901 - YL910
1YL921 - YL925
2YL926 - YL930
1YL931 - YL936
2YL937 - YL940
1YL951 - YL955
2YL956 - YL968
1YM101 - YM103
1YM201 - YM242
1YM251 - YM299
1YM301 - YM387
2YM388 - YM396
1YM471
1YM481 - YM484
1YM501 - YM515
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
21 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 22

GroupVariable Number
1YM521 - YM522
1YM541
1YM551 - YM553
1YM571 - YM572
1YM581 - YM582
1YM591 - YM598
2YM599
1YM631 - YM634
1YM641 - YM652
1YM671 - YM672
2YM673 - YM674
1YM691 - YM694
2YM695 - YM698
1YM701 - YM710
2YM761 - YM765
1YN001 - YN016
1YN021 - YN024
1YN061
1YN071 - YN082
1YN091 - YN092
1YN101 - YN112
1YN121
1YN201 - YN202
1YN211 - YN219
1YN231 - YN235
1YN261
1YQ001
2YQ002 - YQ003
2YQ011 - YQ014
2YQ026 - YQ027
2YQ036 - YQ041
2YQ201
2YQ231
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
22 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 23

GroupVariable Number
2YQ241
2YQ291 - YQ293
2YQ401 - YQ402
2YR001 - YR003
2YR051 - YR052
2YR101
2YR201
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
The tail strobe light, located at the aft end of section 48, is not electrically bonded to a primary structure
in the airplane. In case of a direct lightning strike to the tail strobe light, electromagnetic coupling and
large transient voltages can be transmitted into the pressure vessel and couple to wires of the airplane
systems that are routed with the light wires. Those large transient voltages can possibly cause damage
to the operation of the airplane's electrical systems and avionics equipment. In addition to electromagnetic
coupling, electrical current on the tail strobe light system wiring could create an ignition source. This
service bulletin will add lightning protection to the tail strobe light system wiring and minimize potential
fire hazard created by induced electrical current. This is done by adding 2 electrical ground paths. The
primary ground path passes through the APU exhaust system to the airplane metal structure. The
secondary ground path passes through the added wire bundle shields to ground any transient voltages.
The electrical bonding will prevent the effects of lightning strikes to the airplane system. If the change
in this service bulletin is not done, a direct lightning strike to the tail strobe light can cause damage to
the operation of the airplane's systems.
This service bulletin gives the instructions and a kit of parts to change the tail strobe light installation
and wiring.
Boeing Service Related Problem (SRP) 737NG-SRP-33-0052 is related to this service bulletin.
D. Description
At the aft end of the airplane, remove the tail strobe light L46 and replace the light housing. Drill holes
on the new light housing. Install the light housing and tail strobe light L46.
In the tail cone area, install a new STA 1156 bulkhead disconnect bracket. Install the new wire bundle
W7152 that runs from the tail strobe light to the new disconnect bracket and install a potted insert and
spacers on the tail cone wall to hold the new wire bundle.
Make wiring changes to wire bundles W4724, W5726, and W7150 to remove the tail strobe light wires.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
23 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 24

Measure the electrical bonding of the new STA 1156 bulkhead disconnect bracket and the new connector
D44582.
Measure the electrical bonding of the tail strobe light, the light housing and aft fairing to make sure of
the correct resistance.
Do an operational test of tail strobe light L46 to make sure the light operates correctly.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones
ZoneModel
211, 317, 318737-600, 737-700, 737-700C,
737-800, 737-900, 737-900ER
Group 2:
Affected Maintenance Zones
ZoneModel
211, 317, 318737-700, 737-700C, 737-800,
737-900ER
Group 3:
Affected Maintenance Zones
ZoneModel
211, 317, 318737-600, 737-700, 737-800
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Boeing recommends that the change given in this service bulletin be done within 72 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
24 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 25

If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this change for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator
task hour data if necessary. The estimate does not include lost time. These are some examples of lost
time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1, Configuration 1:
Elapsed HoursTask HoursNumber of PersonsTask
2.502.501Open Access
1.0011Figure 1
1.0011Figure 3
OnlyRouteShowsFigure 7
2.402.401Figure 8
OnlyRouteShowsFigure 11
0.500.501Figure 12
0.550.551Figure 13
2.602.601Figure 14
2.754.502Figure 15
2.502.501Close Access
0.751.502Test
16.5519.05TOTAL FOR EACH AIRPLANE
Group 1, Configuration 2:
Elapsed HoursTask HoursNumber of PersonsTask
2.502.501Open Access
1.0011Figure 1
1.0011Figure 4
OnlyRouteShowsFigure 7
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
25 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 26

Group 1, Configuration 2:
Elapsed HoursTask HoursNumber of PersonsTask
2.402.401Figure 8
OnlyRouteShowsFigure 11
0.500.501Figure 12
0.550.551Figure 13
2.602.601Figure 14
2.754.502Figure 15
2.502.501Close Access
0.751.502Test
16.5519.05TOTAL FOR EACH AIRPLANE
Group 2:
Elapsed HoursTask HoursNumber of PersonsTask
2.502.501Open Access
1.001.001Figure 2
0.500.501Figure 5
0.750.751Figure 6
OnlyRouteShowsFigure 7
2.402.401Figure 8
OnlyRouteShowsFigure 11
0.500.501Figure 12
0.550.551Figure 13
2.602.601Figure 14
3.753.751Figure 16
2.502.501Close Access
0.751.502Test
17.8018.55TOTAL FOR EACH AIRPLANE
Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
2.502.501Open Access
1.001.001Figure 1
1.001.001Figure 3
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
26 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 27

Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
OnlyRouteShowsFigure 9
1.701.701Figure 10
OnlyRouteShowsFigure 11
0.500.501Figure 12
0.550.551Figure 13
2.602.601Figure 14
2.754.502Figure 15
2.502.501Close Access
0.751.502Test
15.8518.35TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
Group 1:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 1,216.0+ 1737-600
+ 1,256.0+ 1737-700/-700C
+ 1,368.0+ 1737-800
+ 1,410.0+ 1737-900/-900ER
Group 2:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 1,256.0+ 1737-700/-700C
+ 1,368.0+ 1737-800
+ 1,410.0+ 1737-900ER
Group 3:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 1,216.0+ 1737-600
+ 1,256.0+ 1737-700
+ 1,368.0+ 1737-800
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
27 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 28

I. Electrical Load Data
Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 38275-138S
b. Boeing Service Related Problem (SRP) 737NG-SRP-33-0052
c. Service Bulletin Index D6-19567
d. Standard Overhaul Practices Manual (SOPM) 20-50-19
e. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 24-22-00, 27-31-00, 33-44-04,
49-81-31.
f. Standard Wiring Practices Manual (SWPM) 20-10-11, 20-10-12, 20-10-19, 20-14-12, 20-20-00,
20-23-17, 20-25-11, 20-25-12, 20-30-11, 20-30-12, 20-61-11, 20-74-12
g. 737-600/700/800/900 Wiring Diagram Manual (WDM) 33-44-12
h. Structural Repair Manual Chapter 51
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
Bracket Installation148A2605
Tailcone Integration Instl148A7100
Wire Bundle Inst - Right Sidewall, Section 48288A4808
Duct Instl - Eductor Inlet, APU355A1000
Duct Instl - Exhaust, APU354A0000
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
28 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 29

Chapter-SectionPublication
33-44737 Aircraft Maintenance Manual
33-44737 Wiring Diagram Manual
33-44737 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
29 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 30

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
30 of 78
BOEING SERVICE BULLETIN 737-33-1146
BLANK PAGE

### Page 31

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
Group 1:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this
Service Bulletin (US Dol-
lars)
DateNameKit Number
4,422.00February 28, 2012Top Kit, Retrofit - Tail
Strobe Light System Pro-
tection
002A0006-69
Group 2:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this
Service Bulletin (US Dol-
lars)
DateNameKit Number
2,818.00February 28, 2012Top Kit, Retrofit - Tail
Strobe Light System Pro-
tection
002A0006-90
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
31 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 32

Group 3:
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the origi-
nal issue date of this
Service Bulletin (US Dol-
lars)
DateNameKit Number
4,478.00February 28, 2012Top Kit, Retrofit - Tail
Strobe Light System Pro-
tection
002A0006-93
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of November 6, 2007. For
task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing
Commercial Airplanes Group - Warranties. The kits/parts for airplanes in warranty as of that date will
be supplied at no charge. Send a purchase order for the kits/parts to Boeing Spares. Please refer to
this service bulletin number and reference the airplane variable number in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
Kit 002A0006
NotesNameQTYNew Part Number
-93-90-69
Top Kit, Retrofit -
Tail Strobe Light
System Protection
..-002A0006-69
Top Kit, Retrofit -
Tail Strobe Light
System Protection
.-.002A0006-90
Top Kit, Retrofit -
Tail Strobe Light
System Protection
-..002A0006-93
WIRE KIT-LIGHT-
NING PROTEC-
TION OF TAIL
STROBE LIGHT
SYSTEM WIRING-
1
.11280A3160-1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
32 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 33

Kit 002A0006
NotesNameQTYNew Part Number
-93-90-69
WIRE KIT-LIGHT-
NING PROTEC-
TION OF TAIL
STROBE LIGHT
SYSTEM WIRING-
2
1..280A3160-2
(a)HOUSING ASSY -
RETROFIT
1.1284A3162Y6
DISCONNECT
BRACKET
111287A4811Y119
(b)BOLT, PROTRUD-
ING HD
333BACB30NX6K4
(b)BOLT, PROTRUD-
ING HD
.3.BACB30NX6K4X
CLAMP, WIRE
BUNDLE
333BACC10GU102
CLAMP, WIRE
BUNDLE
333BACC10GU103
CLAMP, WIRE
BUNDLE
333BACC10GU104
COLLAR333BACC30BH6
INSERT, BLIND111BACI12AD3CM14
NUT, SELF-LOCK,
HEX
444BACN10JC04CD
SCREW5.5BACS12CK3U8
SCREW, CAP111BACS12GU3K17
SCREW, CAP111BACS12GU3K23
SCREW, CAP333BACS12GU3K6
WASHER5.5NAS1149C0332R
WASHER888NAS1149DN432J
(b)SCREW444NAS1801-04-7
SPACERS FOR
RIVETS
111NAS42DD6-40FC
SPACERS FOR
RIVETS
111NAS42DD6-64FC
(a) Discard the existing part.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
33 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 34

Kit 002A0006
NotesNameQTYNew Part Number
-93-90-69
(b) If grip length shown is not available at Boeing, fasteners supplied
in kits may be one grip length longer than indicated. Also, if any
fasteners part numbers listed are not available or have been su-
perseded, substitute fasteners may be supplied in kits. SRM
Chapter 51 and Boeing Document D-590 are used to determine
the part numbers used as substitutes.
Kit 280A3160
NotesNameQTYNew Part Number
-104-103-102-101-2-1
WIRE KIT-LIGHT-
NING PROTEC-
TION OF TAIL
STROBE LIGHT
SYSTEM WIRING-
1
.....-280A3160-1
ASSY - W4724...-.1280A3160-101
ASSY - W5726..-.1.280A3160-102
ASSY - W7150.-..11280A3160-103
ASSY - W7152-...11280A3160-104
WIRE KIT-LIGHT-
NING PROTEC-
TION OF TAIL
STROBE LIGHT
SYSTEM WIRING-
2
....-.280A3160-2
LACING TAPE....11280A2001-1
ASSY - W4724...-.1280A3160-101
ID - CONNECTOR..11..280A3160-10101
ID - WIRE...1..280A3160-10102
ID - WIRE...1..280A3160-10103
ID - SPLICE...1..280A3160-10104
ID - SPLICE...1..280A3160-10105
WIRE LIST...1..280A3160-101W
ASSY - W5726..-.1.280A3160-102
ID - WIRE..1...280A3160-10201
ID - WIRE..1...280A3160-10202
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
34 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 35

Kit 280A3160
NotesNameQTYNew Part Number
-104-103-102-101-2-1
ID - SPLICE..1...280A3160-10203
ID - SPLICE..1...280A3160-10204
OVERSHIELD -
TUBULAR WIRE
BRAID
..1...280A3160-10205
SLEEVE - PRO-
TECTIVE
..1...280A3160-10206
WIRE - PIGTAIL..1...280A3160-10207
WIRE LIST..1...280A3160-102W
ASSY - W7150.-..11280A3160-103
ASSY - W7152-...11280A3160-104
WIRE BUNDLE -
TAIL STROBE
DISC. TO TAIL
NAV LIGHT
1.....286A7152-003
(a)INSULATION
SLEEVING, HEAT
SHRINKABLE,
BLACK, IN DIA
1/8", CLASS 1
.333..829A9003-180
(a)INSULATION
SLEEVING, HEAT
SHRINKABLE,
BLACK, IN DIA
3/16", CLASS 1
..3...829A9003-360
(a)INSULATION
SLEEVING, HEAT
SHRINKABLE,
BLACK, IN DIA
3/8", CLASS 1
..2...829A9003-380
TFE TAPE, PER-
MACEL P-440
....11829A9007-075
CLAMP, LOOP..11..BACC10KE10
(a)CONTACT, SOCK-
ET
..33..BACC47CP1S
CONNECTOR,
PLUG
..11..BACC63BP10C5SN
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
35 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 36

Kit 280A3160
NotesNameQTYNew Part Number
-104-103-102-101-2-1
(a)SLEEVE, SOL-
DER, HEAT
SHRINKABLE
WITH 20 AWG
SHIELD WIRE
...7..BACS13CT3C
(a)SLEEVE..2...BACS13S232BNP
(a)SLEEVE..2...BACS13S312CNP
(a)TERMINAL, LUG..23..BACT12AC3
(a)TERMINAL..3...BACT12C20
(a)SPLICE...3..D-150-0168
PLUG..44..MS27488-20-1
(a) There are more parts than are necessary
Kit 280A2001
NotesNameQTYNew Part Number
-1
LACING TAPE-280A2001-1
BMS13-54, TYPE
I, CLASS 1,
GRADE B, FINISH
C, COLOR WHITE
1N0001947
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a) (b)SEALANT, BMS5-95-A00247
(b)ALCOHOL - ISOPROPYL, TT-I-735-B00130
(a) (b)COTTON WIPER, BMS15-5-G00034
(a) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(b) It is permissible to use an equivalent.
3. Parts Modified and Reidentified
None.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
36 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 37

4. Parts Removed and Not Replaced
NotesQTYNameExisting Part
Number
1PLUGMS3126F16-8S
1HOUSING ASSEM-
BLY
65-58288-( )
1BRACKET ASSY
SPARK GAP AR-
RESTER
284A3862-( )
1MARKERBAC27DEX7380
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
37 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 38

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
38 of 78
BOEING SERVICE BULLETIN 737-33-1146
BLANK PAGE

### Page 39

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. The work instructions are divided into work packages. Task Hours and Elapsed Hours
for each package are given in Paragraph 1.G., Manpower. You can do each work
package independently.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
5. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51.
6. Refer to the SWPM 20-10-11 and SWPM 20-10-12 for the wire installation procedures,
and SWPM 20-10-19 for the wire separation requirements, as accepted procedures.
7. The necessary conditions for selection of clamp type and size are included in SWPM
20-10-12. If any wire bundle support clamp specified in this service bulletin does not
make a correct fit on the wire bundle, refer to SWPM 20-10-12 as an accepted
procedure to select a clamp that fits correctly.
8. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
39 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 40

9. A General Visual Inspection is defined as: A visual examination of an interior or
exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise
specified. A mirror may be necessary to enhance visual access to all exposed surfaces
in the inspection area. This level of inspection is made under normally available
lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or platforms
may be required to gain proximity to the area being checked.
10. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
11. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
12. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
The removed part can be discarded if a new or serviceable part is installed.
13. This service bulletin includes functional test procedures for the systems changed by
this service bulletin. More functional tests can possibly be necessary in accordance
with standard maintenance practices because of interruption to other airplane systems.
14. Some Boeing parts are supplied in a temporary configuration. Those parts are
identified with a 'U', 'W', or 'Y' in place of the '-' (dash) in the part number. It is
permitted to install parts identified with a 'U', 'W', or 'Y' as an alternative to the '-'
(dash) part number. Boeing Drawing 005W0900 contains more data.
B. WORK INSTRUCTIONS
1. Remove electrical power from the airplane. Refer to 737-600/700/800/900 AMM 24-22-00 as an
accepted procedure.
2. At the area aft of the tail cone, remove and keep the aft fairing assembly and the tail cone access
door 318BR. Refer to 737-600/700/800/900 AMM 49-81-31 as an accepted procedure.
3. Group 1, 3:
Make changes to the tail cone light assembly in accordance with FIGURE 1.
4. Group 2:
Make changes to the tail cone light assembly in accordance with FIGURE 2.
5. Group 1, Configuration 1; Group 3:
In the tail cone, install the new STA 1156 disconnect bracket in accordance with FIGURE 3.
6. Group 1, Configuration 2:
In the tail cone, install the new STA 1156 disconnect bracket in accordance with FIGURE 4.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
40 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 41

7. Group 2:
Remove the old Spark Gap Lightning Arrestor (SGLA) STA 1156 disconnect bracket and the
marker and install the new disconnect bracket in accordance with FIGURE 5 and FIGURE 6.
8. Group 1-2:
In the tail cone, remove the wire support clamps and make changes to the wire bundle W4724 in
accordance with FIGURE 7 and FIGURE 8.
9. Group 3:
In the tail cone, remove the wire support clamps and make changes to the wire bundle W5726 in
accordance with FIGURE 9 and FIGURE 10.
10. In the tail cone, make wiring changes for wire bundle W7150 in accordance with FIGURE 11 and
FIGURE 12.
11. In the tail cone, install the wire bundle W7152 in accordance with FIGURE 13 and FIGURE 14.
12. Group 1, 3:
At the aft area of the tail cone, install and bond the housing assembly and aft fairing assembly in
accordance with FIGURE 15.
13. Group 2:
At the aft area of the tail cone, install and bond the housing assembly and aft fairing assembly in
accordance with FIGURE 16.
14. To make sure the elevator system is free from binding or interference, do a general visual inspection
of wiring around the upper & lower torque tubes and input quadrants. Make sure the wiring is
secure and has appropriate clearance through full range of elevator travel.
15. Apply electrical power to the airplane. Refer to 737-600/-700/-800/-900 AMM 24-22-00 as an
accepted procedure.
16. Do the Light Test for the tailcone anti-collision light assembly. Refer to 737-600/-700/-800/-900
AMM 33-44-04 as an accepted procedure.
17. Accomplish the Elevator Travel Limit test. Refer to 737-600/700/800/900 AMM 27-31-00 as an
accepted procedure.
18. At the aft area of the tail cone, install the tail cone access door 318BR. Refer to
737-600/700/800/900 AMM 49-81-31 as an accepted procedure.
19. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
41 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 42 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 1, 3.
2050855
FIGURE 1: REMOVE THE TAIL ANTI-COLLISION LIGHT ASSEMBLY
(SHEET 1 OF 2)
Original Issue: November 02, 2011
737-33-1146
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  42 of 78

### Page 43

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
8BACB30NT3K2BOLTRemove / Keep1
8BACN10JR3CFDNUTRemove / Keep
1MS3126F16-8SPLUGRemove2
8BACS12HN3-6BOLTRemove / Keep3
130-0909-( )LIGHT ASSEMBLYRemove / Keep4
165-58288-( )HOUSING ASSEMBLYRemove5
FIGURE 1: REMOVE THE TAIL ANTI-COLLISION LIGHT ASSEMBLY
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
43 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 44 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 2.
8 PLACES
5 PLACES 1
2064287
FIGURE 2: REMOVE THE TAIL ANTI-COLLISION LIGHT ASSEMBLY
(SHEET 1 OF 2)
Original Issue: November 02, 2011
737-33-1146
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  44 of 78

### Page 45

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
8BACB30NT3K2BOLTRemove / Keep1
8BACN10JR3CFDNUTRemove / Keep
5BACS12CK3U8SCREWRemove / Keep
5NAS1149C0332RWASHERRemove / Keep
1MS3126F16-8SPLUGRemove2
8BACS12HN3-6BOLTRemove / Keep3
130-0909-( )LIGHT ASSEMBLYRemove / Keep4
1284A3162-6STROBE HOUSING
ASSEMBLY
Remove / Keep5
FIGURE 2: REMOVE THE TAIL ANTI-COLLISION LIGHT ASSEMBLY
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
45 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 46 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 1, Configuration 1; Group 3.
_FWD
STIFFENER
STA
0.02 MINIMUM CLEARANCE  1156
BETWEEN BRACKET AND
STIFFENER
0.50
0.38
BRACKET
0.62
0.50
- B
FWD
A-A  B-B  2050907
FIGURE 3: INSTALLATION OF NEW DISCONNECT BRACKET AT THE STA 1156 BULKHEAD
(SHEET 1 OF 2)
Original Issue: November 02, 2011
BOEING PROPRIETARY -  737-33-1146
Copyright © Unpublished Work - See page 1 for details.  46 of 78

### Page 47

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--SURFACEClean1
Measure to the giv-
en dimensions. Re-
fer to view B-B.
1287A4811-119DISCONNECT
BRACKET
Put / Hold2
(c)1287A4811-119DISCONNECT
BRACKET
Measure
Drill three 0.187-
0.190 inch holes.
3-HOLEDrill3
1287A4811-119DISCONNECT
BRACKET
Install (New)4
3BACB30NX6K4BOLT, PROTRUDING
HD
Install (New)5
3BACC30BH6COLLARInstall (New)
(d)--SURFACEMeasure6
(a) Clean and prepare the STA 1156 disconnect bracket surface for bonding in accordance with cleaning
procedure 5. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as an accepted procedure.
(b) Clean and prepare the stiffener surface for bonding in accordance with cleaning procedure 1 and cleaning
procedure 5. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as an accepted procedure.
(c) Maintain 0.02 minimum clearances between the upper forward edge of the 287A4811-119 disconnect
bracket and the adjacent 1156 bulkhead chord. Maintain a minimum of 1.7 Dimensions fastener edge
margin on the disconnect bracket and the stiffener.
(d) Maximum resistance 0.5 Milliohms. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as
an accepted procedure.
FIGURE 3: INSTALLATION OF NEW DISCONNECT BRACKET AT THE STA 1156 BULKHEAD
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
47 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 48 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 1, Configuration 2.
FWD
STIFFENER
STA
1156
BRACKET
0.54
0.42
0.66
0.54
• B
A-A  B-B  2054379
FIGURE 4: INSTALLATION OF NEW DISCONNECT BRACKET AT THE STA 1156 BULKHEAD
(SHEET 1 OF 2)
Original Issue: November 02, 2011
BOEING PROPRIETARY -  737-33-1146
Copyright © Unpublished Work - See page 1 for details.  48 of 78

### Page 49

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--SURFACEClean1
Measure to the giv-
en dimensions. Re-
fer to view B-B.
1287A4811-119DISCONNECT
BRACKET
Put / Hold2
1287A4811-119DISCONNECT
BRACKET
Measure
Drill three 0.187-
0.190 inch holes.
3-HOLEDrill3
1287A4811-119DISCONNECT
BRACKET
Install (New)4
3BACB30NX6K4BOLT, PROTRUDING
HD
Install (New)5
3BACC30BH6COLLARInstall (New)
(c)--SURFACEMeasure6
(a) Clean and prepare the STA 1156 disconnect bracket surface for bonding in accordance with cleaning
procedure 5. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as an accepted procedure.
(b) Clean and prepare the stiffener surface for bonding in accordance with cleaning procedure 1 and cleaning
procedure 5. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as an accepted procedure.
(c) Maximum resistance 0.5 Milliohms. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as
an accepted procedure.
FIGURE 4: INSTALLATION OF NEW DISCONNECT BRACKET AT THE STA 1156 BULKHEAD
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
49 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 2.
FWD
STIFFENER
, BRACKET
A-A  2052531
FIGURE 5: REMOVAL OF SGLA DISCONNECT BRACKET AT STA 1156 BULKHEAD
(SHEET 1 OF 2)
Original Issue: November 02, 2011
BOEING PROPRIETARY -  737-33-1146
Copyright © Unpublished Work - See page 1 for details.  50 of 78

### Page 51

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
3BACB30NX6K4BOLT, PROTRUDING
HD
Remove1
3BACC30BH6COLLARRemove
1284A3862-( )BRACKET ASSY -
SPARK GAP AR-
RESTER
Remove2
1BAC27DEX7380MarkerRemove3
FIGURE 5: REMOVAL OF SGLA DISCONNECT BRACKET AT STA 1156 BULKHEAD
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
51 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 2.
FWD
STIFFENER
STA
1156
BRACKET
• B
A-A  B-B  2052532
FIGURE 6: INSTALLATION OF NEW DISCONNECT BRACKET AT STA 1156 BULKHEAD
(SHEET 1 OF 2)
Original Issue: November 02, 2011
BOEING PROPRIETARY -  737-33-1146
Copyright © Unpublished Work - See page 1 for details.  52 of 78

### Page 53

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--SURFACEClean1
1287A4811-119DISCONNECT
BRACKET
Attach2
(c)3BACB30NX6K4XBOLT, PROTRUDING
HD
Install (New)3
3BACC30BH6COLLARInstall (New)
(d)--SURFACEMeasure4
(a) Clean and prepare the STA 1156 disconnect bracket surface for bonding in accordance with cleaning
procedure 5. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as an accepted procedure.
(b) Clean and prepare the stiffener surface for bonding in accordance with cleaning procedure 1 and cleaning
procedure 5. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as an accepted procedure.
(c) Make sure to oversize the hole by increasing the dimensions to 0.200-0.203 inch holes in accordance
with 737-600/-700/-800/-900/-900ER SRM 51-40-05.
(d) Maximum resistance 0.5 Milliohms. Refer to SWPM 20-20-00 electrical fay surface bond, category 2 as
an accepted procedure.
FIGURE 6: INSTALLATION OF NEW DISCONNECT BRACKET AT STA 1156 BULKHEAD
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
53 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 54 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 1-2.
• D44582P
SPLICE AREA
- W4724
• CAP AND STOW
• W4724
• D44584P
FWD
2054443
FIGURE 7: WIRE ROUTING FOR WIRE BUNDLE W4724 AND INSTALLATION OF CLAMP
(SHEET 1 OF 2)
Original Issue: November 02, 2011
737-33-1146
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  54 of 78

### Page 55

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Use existing fasten-
ers.
1BACC10GU102CLAMP, WIRE BUN-
DLE
Install (New)1
FIGURE 7: WIRE ROUTING FOR WIRE BUNDLE W4724 AND INSTALLATION OF CLAMP
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
55 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 56

This Figure applies only to: Group 1-2.
REFER TO: 737-600/700/800/900 WDM 33-44-12
MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
2BMS13-48, TYPE 12,
CLASS 1, AWG 20
WIRE1
Use to retie wire bundle. Refer to
SWPM 20-10-11 as an accepted
procedure.
-280A2001-1LACING TAPE
(a)-829A9007-075TFE TAPE, PERMACEL P-
440
Refer to SWPM 20-61-11 as an
accepted procedure.
2BACC47CP1SCONTACT, SOCKET2
FIGURE 8: WIRE CHANGE FOR WIRE BUNDLE W4724
(SHEET 1 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
56 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 57

MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
Refer to SWPM 20-74-12 as an
accepted procedure.
6BACS13CT3CSLEEVE, SOLDER, HEAT
SHRINKABLE WITH 20
AWG SHIELD WIRE
3
Refer to SWPM 20-30-11 as an
accepted procedure.
2BACT12AC3TERMINAL, LUG4
Refer to SWPM 20-14-12 as an
accepted procedure.
2829A9003-180INSULATION SLEEVING,
HEAT SHRINKABLE,
BLACK, IN DIA 1/8",
CLASS 1
5
Clock the backshell on connector
D44582P to 10:00. Refer to SWPM
20-61-11 as an accepted proce-
dure.
1BACC63BP10C5SNCONNECTOR, PLUG6
Refer to SWPM 20-25-12 as an
accepted procedure.
1BACC10KE10CLAMP, LOOP
Imprinted "D44582P". Install ID
tape within 6 inches of connector.
1280A3160-10101ID - CONNECTOR
Seal unused connector cavities as
required.
3MS27488-20-1PLUG
(b)1280A3160-10102ID - WIRE7
(b)1280A3160-10103ID - WIRE8
Refer to SWPM 20-30-12 as an
accepted procedure.
2D-150-0168SPLICE9
Imprinted "SM34".1280A3160-10105ID - SPLICE10
Imprinted "SM33".1280A3160-10104ID - SPLICE11
(a) Apply Teflon tape at the strain relief clamp as necessary. Refer to SWPM 20-25-11 as an accepted proce-
dure.
(b) Re-identify the cap and stow segment of the wire from W4724-1003-20 to W4724-1013-20 and from
W4724-1004-20 to W4724-1014-20. Cap and stow wires.
FIGURE 8: WIRE CHANGE FOR WIRE BUNDLE W4724
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
57 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 58 (OCR)

BOEING SERVICE BULLETIN 737-33-1146
This Figure applies only to: Group 3.
D44582P
SPLICE AREA.
• W5726
- CAP AND STOW
- W5726
FWD
W5726
D44584P
2055382
FIGURE 9: WIRE ROUTING FOR WIRE BUNDLE W5726 AND INSTALLATION OF CLAMP
(SHEET 1 OF 2)
Original Issue: November 02, 2011
BOEING PROPRIETARY -  737-33-1146
Copyright © Unpublished Work - See page 1 for details.  58 of 78

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Use existing fasten-
ers.
1BACC10GU104CLAMP, WIRE BUN-
DLE
Install (New)1
FIGURE 9: WIRE ROUTING FOR WIRE BUNDLE W5726 AND INSTALLATION OF CLAMP
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
59 of 78
BOEING SERVICE BULLETIN 737-33-1146

### Page 60

This Figure applies only to: Group 3.
REFER TO: 737-600/700/800/900 WDM 33-44-12
The flag note numbers shown below agree with the numbers shown in the flag symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAME
FLAG
NOTE
2BMS13-48, TYPE 10,
CLASS 1, AWG 20
WIRE1
Use to retie wire bundle. Refer to
SWPM 20-10-11 as an accepted
procedure.
-280A2001-1LACING TAPE
(a)-829A9007-075TFE TAPE, PERMACEL P-
440
FIGURE 10: WIRE CHANGE FOR WIRE BUNDLE W5726
(SHEET 1 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 02, 2011
737-33-1146
60 of 78
BOEING SERVICE BULLETIN 737-33-1146

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-33-1146/file/4f970ff30bd9.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
