# Boeing Special Attention Service Bulletin 737-52-1149: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0855; AD 2013-09-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-52-1149](https://openairdocs.org/service-documents/boeing/sb-737-52-1149.md)
- Title as filed: SB-737-52-1149-00--
- Pages: 80
- PDF: https://openairdocs.org/files/sha256/40/8b/408b52b09ea59d5f30c6bbcd5746534a2acbb63fef707ab032fe3a0ab3688971
- Page: https://openairdocs.org/service-documents/boeing/sb-737-52-1149/file/408b52b09ea5

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 1 of 80
 
 
 
Commercial
Airplane
Group 737
SPECIAL ATTENTION
Service Bulletin
Number: 737-52-1149
Date: December 11, 2003
ATA System: 5231
AXC
SUBJECT: DOORS - Forward Cargo Door - Number 4 Cross Beam Inspection, Repair and 
Preventative Modification
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2003 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable 
subject matter.  Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third 
parties.  Treatment of the document and the information it contains is governed by contract with Boeing.  For 
more information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, BBJ, DC-8, DC-9, 
DC-10, MD-10, MD-11, MD-80, MD-88, MD-90, and the red-white-and-blue Boeing livery are all trademarks 
owned by The Boeing Company;  and no trademark license is granted in connection with this document unless 
provided in writing by Boeing.

### Page 2

BLANK PAGE
December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 2 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
BLANK PAGE

### Page 3

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 3 of 80
 
 
 
Commercial
Airplane
Group 737
SPECIAL ATTENTION
Service Bulletin
Number: 737-52-1149 Summary
Date: December 11, 2003
ATA System: 5231
AXC
SUBJECT: DOORS - Forward Cargo Door - Number 4 Cross Beam Inspection, Repair and 
Preventative Modification
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Four operators have reported cracks in the forward cargo door. The cracks occurred in the web and in the 
T-chord of the number 4 cross beam. Cracks in the cross beam web were up to 1 inch long. Cracks in the 
T-chord were up to 1.3 inches long. Airplanes had accumulated between 41,000 and 79,000 flight cycles.       
A crack in the number 4 cross beam combined with a crack in the number 5 cross beam on the forward cargo 
door may result in a rapid loss of cabin pressure. If cracks occur in the number 5 cross beam it will increase the 
load in the number 4 cross beam and could cause it to crack prematurely. Cracking in the number 5 cross beam 
is covered in the subject of Alert Service Bulletin 737-52A1100.    
Boeing Structural Item Interim Advisory (SIIA) 737-287 is related to this service bulletin.
Boeing Service Related Problem (SRP) 737-SRP-52-0070 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane PW317 by Service 
Bulletin 737-52-1149 Validation Copy 01 before the initial release of this service bulletin.  The change completed 
on airplane PW317 by Service Bulletin 737-52-1149 Validation Copy 01 is equivalent to the initial release of this 
service bulletin.  Airplane PW317 has the configuration of a Group 1 airplane.
ACTION (PRR 35005-248RS)
This Service Bulletin is divided into 2 groups. Group 1 airplanes have forward cargo doors with a bonded inner 
skin and Group 2 airplanes have forward cargo doors with a chemically milled inner skin. 
On the forward cargo door do a visual inspection and High Frequency Eddy Current (HFEC) inspection for 
cracks in the number 4 cross beam web, the T-chord flange and the T-chord root radius. If no cracks are found 
install the cross beam preventative modification or repeat the inspection at the given intervals. If cracks are 
found in the cross beam web or the T-chord, install the cross beam web and T-chord repair.

### Page 4

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 4 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
It is recommended that Boeing service bulletin 737-52A1100 and this service bulletin be incorporated 
concurrently. Since both service bulletins remove fasteners in the door frame and inner skin, concurrent 
incorporation will minimize rework to these parts. If service bulletin 737-52A1100 is worked concurrently, 
partially remove inner skin to gain access instead of cutting access holes as specified in this service bulletin. 
Reassemble the inner skin with production fasteners or approved substitutes. These fasteners are not included 
in the supplied kit.  
Note that service bulletin 737-52A1100 is mandated by Airworthiness Directive 2000-07-06. If incorporation of 
this service bulletin results in changes that affect incorporation of service bulletin 737-52A1100, it may be 
necessary to seek alternate means of compliance (AMOC) for the Airworthiness Directive.    
EFFECTIVITY
All 737-100/-200/-200C/-300/-400/-500 series airplanes.   
COMPLIANCE
For compliance times refer to the table in paragraph 1.E., Compliance. 
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection and/or repair procedures given in this service 
bulletin.
MANPOWER
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Airplanes Total Task Hours Elapsed Hours
Group 1 72 36
Group 2 72 36

### Page 5

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 5 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
OUTER
SKINTYPICALCRACK
BEAM WEBT-CHORD
FRAME
SEAL
FITTING
STOP
WEB
INNER SKIN
CRACK IN WEB AND OUTER CHORD AT AFT END OF BEAM SHOWN,
CRACK IN WEB AT FORWARD END OF BEAM SIMILAR
A-A
STA
STA
540
360
STA
460
FWD
FWD
FWD
HAVE A CHEMICALLY MILLED INNER SKIN
WITH A BONDED INNER SKIN AND GROUP 2 AIRPLANES
GROUP 1 AIRPLANES HAVE A FORWARD CARGO DOOR
CROSS BEAM
NUMBER 4
TYPICAL
CRACKS
T-CHORD
REPEAT INSPECTIONS.
THE PREVENTATIVE MODIFICATION OR
FOUND. IF NO CRACKS ARE FOUND DO
FOR CRACKS, REPAIR IF CRACKS ARE
INSPECT THE NUMBER 4 CROSS BEAM
A
A

### Page 6

BLANK PAGE
December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 6 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
BLANK PAGE

### Page 7

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 7 of 80
 
 
 
Commercial
Airplane
Group 737
SPECIAL ATTENTION
Service Bulletin
Number: 737-52-1149
Date: December 11, 2003
ATA System: 5231
AXC
SUBJECT: DOORS - Forward Cargo Door - Number 4 Cross Beam Inspection, Repair and 
Preventative Modification
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line 
Number, and Serial Number data.
This service bulletin is for the airplanes shown below.  An equivalent change is on subsequent 
production airplanes. Refer to PRR 35005-248RS for data about this change.
Airplane models:
737-100 737-200 737-200C 737-300
737-400 737-500
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
ADC AIRLINES  (ADN)
1 PJ117–PJ119
AEGEAN AIRLINES S.A.  (CRM)
1 PM392 PP929 PS608 PW002
PW053 PW157 PW261 PW564
AER LINGUS  (ARL)
1 PT161–PT168 PW594–PW596
AERGO CAPITAL LIMITED  (CLJ)
1P K 7 7 2

### Page 8

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 8 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
AERIS  (AEY)
1 PM381 PP838 PQ307
2 PQ345–PQ346
AERO CONTINENTE  (COH)
1 PA002 PG021 PG041 PG074
PG218–PG219 PG224 PG305 PG308
PG310–PG311 PG574 PJ002–PJ003 PJ102
PL758
AERO CONTROLS  (AEO)
1P G 3 1 2
AEROFLOT  (ARO)
2 PW441–PW450
AEROLINEAS ARGENTINAS  (ARG)
1 PG584–PG585 PH705–PH708 PH741–PH743 PK102–PK103
PK735–PK737 PK739–PK740 PK747 PK750–PK751
PK755 PK759–PK765 PN112 PY007
AEROMAR AIRLINES  (AOO)
1 PM103
AEROSERVICE  (SRI)
1 PL742–PL743
AEROSUCRE  (SUS)
1 PY201 PY341
AEROSVIT  (UKA)
1 PK564 PQ284 PT614–PT616 PW592
AIGLE AZUR  (AZU)
1 PK215 PL504 PM554 PP947
PW010 PW046
AIR ALGERIE  (ALG)
1 PK361 PK633–PK634 PL717–PL725 PY051
PY053
AIR ATLAS EXPRESS  (YCZ)
1P W 0 2 1
AIR AUSTRAL  (AUX)
1P T 2 1 5
2 PR096 PS621
AIR BERLIN  (BER)
2 PJ811 PW524 PW528–PW530

### Page 9

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 9 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
AIR CANADA  (ACN)
1 PK358 PK671 PK674–PK675 PK677–PK681
PK822 PK881 PK884 PL401–PL417
PL767–PL770 PM141–PM142 PY152–PY154 PY422
PY441
AIR CHINA  (BEJ)
1 PP521–PP522 PQ361–PQ364 PQ367
2 PQ368–PQ369 PQ371–PQ373 PQ988 PQ990
AIR CHINA INNER MONGOLIAN  (IML)
1 PQ365–PQ366 PS614–PS616
2P Q 3 7 0 P S 6 1 7
AIR EUROPA  (ARE)
1 PS657 PW065–PW066 PW265 PW517
2 PR002 PW266
AIR FRANCE  (AFA)
1 PP902 PP910–PP912 PS604 PT214
PT501–PT509
2 PQ991 PT169–PT170 PT303–PT306 PT309
PT510–PT514 PU311–PU313
AIR GABON  (GBN)
1 PP836 PW562 PY191
AIR GREAT WALL  (GWA)
1 PM281–PM283
AIR GUINEE  (GNE)
1 PN456 PY651
AIR INTER CAMEROUN  (ICM)
1P Y 2 7 4
AIR KAZAKSTAN  (KAZ)
1 PG629 PK284 PK563 PM252
AIR MADAGASCAR  (MAD)
1 PG375 PL793 PP852
2P Q 2 9 9
AIR MALAWI  (AML)
1P S 6 0 2
AIR MALTA  (MLT)
1 PL624–PL625 PQ302 PQ306
2 PQ791–PQ793 PS873–PS874
AIR MEDITERRANEE  (AMV)
1 PG028–PG029 PG036 PT023 PY101
PY103 PY301

### Page 10

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 10 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
AIR NAMIBIA  (NAM)
1 PK355 PN492
AIR NAURU  (NAU)
2P W 5 5 6
AIR NEW ZEALAND  (ANZ)
1 PS651
2 PQ997 PR009 PR014 PR041
PR045 PR062–PR066 PR077–PR080 PR101
PS866–PS868
AIR NIPPON  (ANK)
1P T 0 5 3 P W 0 2 6
2 PJ817 PT060 PT063–PT064 PT126
PT128–PT131 PT871–PT886
AIR NORTH YUKON'S AIRLINE  (AND)
1 PK596 PK599
AIR ONE  (ADH)
1 PK432 PK933 PK938 PM410–PM411
PQ228–PQ229 PV232–PV234 PV236–PV237 PW041
PW043 PW052 PW054
2 PQ347–PQ348 PW106 PW267 PW288
PW831 PW851
AIR PHILIPPINES  (PHP)
1 PG001 PG039 PG061–PG062 PG066
PK099 PK541–PK542 PM394–PM395
AIR PLUS COMET  (PLD)
1 PP904
AIR POLONIA  (APL)
2P W 2 6 2 P W 2 6 4
AIR SAHARA  (SAQ)
1 PL452 PW061 PW064 PW114
AIR SENEGAL INTERNATIONAL  (SNG)
1 PK274
AIR SLOVAKIA  (SLO)
1 PK546 PK936–PK937
AIR TANZANIA  (TNZ)
1 PP926 PY611
AIR VANUATU  (VAN)
2P Q 4 5 4

### Page 11

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 11 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
AIR ZIMBABWE  (ZMB)
1 PN431–PN433
AIRASIA  (ASW)
1 PM397–PM398 PP509 PP517 PP848
PP920
2P Q 4 4 8
AIRCALIN  (NCI)
1P P 9 1 8
AIRFAST INDONESIA  (PTF)
1 PK562 PN481 PY343
AIRTRAN  (CQT)
1P K 3 0 6 P K 6 9 7
AIRWORK NZ  (ANX)
1P Y 7 4 1
AIRZENA  (GEI)
1P T 6 1 1
ALASKA AIRLINES  (ASA)
1 PJ301–PJ302 PW116 PW231–PW238 PY112
PY134–PY135 PY270 PY461–PY463 PY593–PY594
2 PJ601–PJ615 PW239–PW252
ALOHA AIRLINES  (ALO)
1 PK286 PK905 PK926 PK934–PK935
PL626 PM251 PM253 PN085
PN473 PN493 PY231 PY242
PY451 PY592 PY595 PY721
ALTER FINANCE  (AFW)
1P K 2 8 2 P K 3 5 9
AMC AVIATION  (AMF)
1P K 2 5 4
AMERICA WEST AIRLINES  (AMW)
1 PL081 PL172 PL551–PL553 PL555–PL557
PL559–PL562 PP022 PP029 PP183–PP187
PP189 PP194–PP195 PP197–PP199 PP383
PP472 PP474–PP475 PP831 PP833–PP834
PP846 PP891 PP893 PP895
PP898–PP899 PP901 PP931–PP934 PP936
PS666–PS669
2 PR067
AMERICAN FALCON AIR  (FAK)
1 PK464 PL026

### Page 12

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 12 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
AMERISTAR AIR CARGO  (CGG)
1 PY345–PY346
AMTEC CORPORATION  (CEF)
1 PK549
ANSETT AUSTRALIA  (ANS)
1 PP908–PP909 PP914 PQ026 PQ028
PQ031 PQ036–PQ037
ANSETT WORLDWIDE AVIATION  (AWW)
1 PP948
ANTINEA AIRLINES  (NTI)
1 PY006
ARAL  (RII)
1P W 0 3 1
ASIANA AIRLINES  (AAR)
1 PV201–PV202 PW005 PW008–PW009 PW018–PW020
PW025
2 PT851–PT853 PV204–PV206 PV208 PV226–PV229
PW274 PW278 PW283 PW286
PW289
ASTRAEUS, LTD.  (AUA)
1 PP515 PP845 PP935
2P Q 9 9 4
ATA ATLANTICO TRANSPORTE AEREO  (AUI)
1 PY003 PY321–PY322
AUSTRAL - CIELOS DEL SUR  (ALA)
1 PN103–PN104 PN110–PN111 PN113–PN115 PN117
AVENSA  (AVN)
1 PK042
AVIACSA AEROEXO  (AEJ)
1 PK216–PK220 PK289 PK598 PK625–PK626
PM101–PM102 PM107 PM115–PM117 PM181
PN454
AVIATION CONSULTANTS  (ACT)
1 PG037 PY001
AVIOGENEX  (AVG)
1P N 5 0 1
AXIS AIRWAYS  (AXY)
1P Q 3 0 1

### Page 13

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 13 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
BAHAMASAIR  (BAH)
1 PK672–PK673
BASIC CAPITAL MANAGEMENT  (BCM)
1 PN455
BATAVIA AIR  (BTV)
1 PK252 PK360 PK635 PK825
BAYU INDONESIA AIR  (BAY)
1P K 5 6 1
BELLVIEW AIRLINES  (BEB)
1 PK203 PK612 PK872–PK873 PL716
BLUE DART AVIATION  (BDA)
1 PK231–PK232 PL451 PN521
BLUE PANORAMA AIRLINES  (BPA)
1 PW518–PW519
2P W 2 8 4
BLUEBIRD CARGO  (BLS)
1 PM383 PQ242
BMI BRITISH MIDLAND  (BMA)
1 PQ291–PQ292 PT181–PT182 PT186–PT187 PT701–PT703
2 PQ971 PQ975 PQ996 PT188
BOEING  (TBC)
1 PG051 PG215 PW113
BOEING 22620 HOLDINGS  (BHA)
1 PL745
BOURAQ AIRLINES  (PTB)
1 PK255 PK501 PK913 PK918–PK920
PK931
BRA TRANSPORTES AEREOS  (BRW)
1 PP985 PQ226 PQ243 PQ261
PW504
BRAATHENS  (BRT)
1 PT002–PT008 PT022 PT024–PT025 PW573–PW576
2 PT011–PT015 PT029 PV351

### Page 14

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 14 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
BRITISH AIRWAYS  (BAB)
1 PM399 PP841–PP842 PQ283 PQ305
PT001 PT009 PT021 PT183
PT185 PT295 PW094 PW101
PW111–PW112 PW115 PW301–PW302 PW304–PW309
PW312–PW319
2 PT307–PT308 PT515–PT516 PW320–PW327
BULGARIA AIR  (BLD)
1 PP504
BUSINESS AEROTECH  (BFI)
1P W 0 0 7
BUZZ  (AUK)
2 PQ433–PQ438
CANJET  (CNJ)
1 PK593
CASINO EXPRESS AIRLINES  (CIN)
1 PG279 PG436 PL455 PN083–PN084
PN086
CAYMAN AIRWAYS  (CAY)
1 PJ009 PK753 PY244
CHANNEL EXPRESS (AIR SERVICES)  (CEX)
1 PQ027 PQ030 PQ032–PQ035
CHILEAN AIR FORCE  (CHF)
1P Q 0 5 3
2P T 9 9 6
CHINA EASTERN AIRLINES  (CEA)
2 PQ977 PQ979 PQ981 PR141–PR143
CHINA EASTERN AIRLINES WUHAN  (WUH)
1 PQ491–PQ492
2 PQ472 PR081–PR082 PR131
CHINA EASTERN YUNNAN AIRLINES  (YUN)
1 PP651–PP652 PQ263 PQ411–PQ412
2 PQ414–PQ418 PS622–PS623 PS628
CHINA SOUTHERN AIRLINES  (GUN)
1 PM407–PM409 PM412 PQ252–PQ255 PS631
PT041 PT043–PT048 PT052
2 PM541–PM544 PM547 PM549 PQ407
PQ479–PQ480 PR121–PR122 PS836–PS837 PS841–PS846

### Page 15

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 15 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
CHINA SOUTHWEST AIRLINES  (XIN)
1 PP631–PP634 PQ401–PQ404
2 PQ405–PQ406 PQ408–PQ410 PS811
CHINA UNITED AIRLINES  (CUL)
1 PP728–PP729 PQ288–PQ289 PS609–PS610
2 PS896–PS897
CHINA XINHUA AIRLINES  (XIH)
1P Q 2 6 4
2 PM546 PQ804–PQ805 PR001 PS856
PW852–PW854
CHINA XINJIANG AIRLINES  (XIJ)
2 PM545 PM548
COMAIR  (CML)
1 PG353–PG354 PG356 PK734 PK738
PK744 PK748 PK754 PK758
PK907 PW310–PW311
CONOCO PHILLIPS ALASKA, INC.  (ATR)
1 PN452–PN453
CONTINENTAL AIRLINES  (CAL)
1 PG056 PG621 PG624 PP671–PP699
PP701 PP703–PP726 PP730 PP732–PP733
2 PT801–PT834 PT901–PT905 PT907–PT930
COPA AIRLINES  (COP)
1 PJ107 PJ112 PK465 PK467
PK514–PK515 PK617
CORSAIR  (COR)
1 PQ224 PW661–PW662
CSA  (CSA)
1 PT301–PT302 PT617–PT621 PW038–PW039
2 PJ816 PT981–PT985 PV302 PW102
PW276 PW431–PW435
DEBIS AIRFINANCE  (DEA)
1P K 2 2 2 P K 8 7 1
DELTA AIR LINES  (DAL)
1 PK613 PL221 PN131–PN163 PN401–PN404
PN407–PN420 PP002 PP021 PP023
PP231–PP243 PP473 PP503 PP506
PQ086–PQ087 PQ231–PQ233 PQ236–PQ237
DEUTSCHE BA  (DBA)
1 PP964–PP965
2 PR015–PR017 PR023–PR030 PS961–PS963

### Page 16

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 16 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
DEUTSCHE STRUCTURED FINANCE  (DSF)
2 PR021–PR022
DOLPHIN AIR  (FDN)
1 PL151 PY241 PY243
EARTH AIRLINES  (ETL)
1P G 3 5 2
EAS AIRLINES NIG  (EAV)
1 PL453
EAST AFRICAN AIRLINES  (EAB)
1 PL023
EASYJET  (EZY)
1 PM382 PM387–PM388 PM391 PP505
PP510–PP511 PP840 PP843–PP844 PP847
PP916 PQ221 PQ223 PQ225
PQ285–PQ286 PS652
2 PP518–PP519 PQ431 PQ974 PQ992
PR003–PR004 PR011–PR013 PR161–PR172 PS971
PS974–PS978
EG&G TECHNICAL SERVICES  (EGN)
1 PJ205 PJ207–PJ210 PJ218 PL763
EGYPTAIR  (EGP)
1 PG026 PT561 PT563–PT565
ESTAFETA  (EST)
1 PY056–PY057 PY131 PY275
ESTONIAN AIR  (ENA)
1P T 1 2 1
2 PT716–PT717
ETHIOPIAN AIRLINES  (ETH)
1 PM254 PN512
EURALAIR  (ERA)
1 PY004
EUROATLANTIC AIRWAYS  (MAE)
1 PP907
EUROPE AIRPOST  (EUE)
1 PP392 PP832 PP925 PP951–PP952
PQ222 PQ421 PS607 PS641–PS644
2 PQ771–PQ772
EUROPEAN AVIATION AIR CHARTER  (EUL)
1 PK044–PK046 PK048–PK050 PK052–PK053 PY273

### Page 17

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 17 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
EUROPEAN CAPITAL HOLDINGS  (ECC)
1P Y 3 6 1
EXECUTIVE JET AIRCRAFT COMPANY  (EXF)
1 PL441
EXPORT RESTRICTED AIRPLANES  (YWV)
1 PH731 PK391 PY021–PY022 PY141–PY142
PY156
FACTS AIR  (FAD)
1P X 7 0 1
FALCON AIR  (FLK)
1 PS636–PS638
FALCON AIR EXPRESS  (FAX)
1P P 8 0 1 P P 8 9 7
FALCONBRIDGE  (NAD)
1P Y 0 0 2
FASCO AIRWAYS  (EAO)
1P G 2 2 8
FEDERATIVE REPUBLIC OF BRAZIL  (BRZ)
1 PK068–PK069
FINOVA  (GRB)
1 PK908–PK910
FIRST AIR  (BRS)
1 PY132–PY133 PY281 PY421
FISCHER AIR  (FIH)
2 PS630 PS871 PS973
FLASH AIRLINES  (HEA)
1P Q 2 9 4
2P Q 4 8 1
FRONTIER AIRLINES  (FRO)
1 PK495 PL622–PL623 PN105 PN108
PP305 PP471 PP508 PP514
PP516 PQ332 PQ341–PQ344 PS653
2 PQ297 PQ451 PQ982 PR005
PR007
FUTURA  (FUA)
1 PW034–PW035 PW047–PW048 PW118–PW119 PW501

### Page 18

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 18 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
GARUDA INDONESIA  (GIA)
1 PS606 PV271–PV272 PW022 PW028
PW036 PW067
2 PQ487 PQ972 PQ987 PQ995
PR061 PR068–PR072 PR091–PR092 PS956
PT681–PT685 PV301 PW272 PW461–PW467
PW525
GATX FINANCIAL CORPORATION  (GAX)
1 PP181–PP182
GB AIRWAYS  (GBA)
2 PP520 PS861
GE CAPITAL CORPORATION  (GEF)
1 PG220–PG221 PG651–PG652 PK026–PK027 PK256
PK466 PT050 PT054 PW015
PW032
2 PQ986 PU301
GENERIC CUSTOMER/SUPPLIER  (XXX)
1P G 2 1 7
GERMANIA  (GER)
1 PP507 PQ230 PQ234–PQ235
GLOBAL AIR  (YCH)
1 PK548
GOVERNMENT OF EGYPT  (EGG)
1 PK257
GUANGXI AIRLINES  (GUX)
1P T 0 4 2 P T 0 4 9
2 PT061–PT062
GUND BUSINESS ENTERPRISES  (GUD)
1 PL001
HAINAN AIRLINES  (HNA)
1 PQ088–PQ091 PS611 PS613 PW093
2 PQ473–PQ475 PV203 PV356–PV357 PW086–PW088
HAPAG-LLOYD FLUG  (HAP)
1 PT101–PT105 PW511 PW513
2P W 5 2 2
HEWA BORA AIRWAYS  (EXD)
1P G 2 7 4
HOLA AIRLINES  (HLB)
1 PP892 PP894 PQ304

### Page 19

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 19 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
ICON  (ICO)
1P W 0 5 1
ILFC  (ILF)
1P T 0 1 0
INDIAN AIR FORCE  (IDF)
1 PH712–PH713 PM016–PM017
INDIAN AIRLINES  (IND)
1 PK237–PK240 PM001–PM006 PY631
INTER AIR  (ITI)
1 PY046–PY047
INTERLEASE AVIATION  (ILA)
1P G 2 1 0
INTERNATIONAL AIR LEASES  (IAL)
1 PL803
INTERNATIONAL AIR PARTS  (IAO)
1P G 5 8 0
INTERNATIONAL TRANSPORT  (YIT)
1P G 3 0 4
ISLAMIC REPUBLIC OF PAKISTAN  (PKG)
1P S 6 1 2
ISLANDSFLUG  (ISF)
1 PP352 PP384 PP913 PQ051–PQ052
PS655 PW117 PW502
ISRAEL AIRCRAFT INDUSTRIES  (IAI)
1P G 5 7 5 P K 6 9 2
JAPAN AIRLINES  (JAL)
2 PW411–PW418
JAPAN TRANSOCEAN AIR  (SWL)
1 PW515–PW516 PW520 PW681–PW683
2 PW401–PW408 PW521
JAT YUGOSLAV AIRLINES  (JAT)
1 PP771–PP779 PQ241 PW092
JATAYU AIR  (JAJ)
1P G 0 6 8
JET AIRWAYS  (JPL)
2 PV207 PV209 PW215–PW216 PW421–PW424

### Page 20

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 20 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
JETCONNECT LIMITED  (JCL)
1 PP915 PP923 PQ002 PQ007
PQ009 PS605
2 PS618
JETRAN INTERNATIONAL, LTD.  (JTI)
1 PK592 PK594 PK602 PK605–PK608
PK610 PM104–PM106 PM108–PM113 PM118–PM119
PN021–PN031 PN035–PN036 PN038
JETSCAPE  (IAN)
1P Q 2 8 1 P W 0 9 1
JETSTAR AIRCRAFT SALES  (JTS)
1P G 3 0 6
JORDAN AVIATION  (JOR)
1 PP896
KARTHAGO AIRLINES  (KAG)
1 PP928 PP930
2P Q 4 3 2
KELOWNA FLIGHTCRAFT AIRCHARTER  (KEL)
1 PN033–PN034
KENYA AIRWAYS  (KEN)
1 PK641–PK642 PY272
2 PR031–PR034
KLM - ROYAL DUTCH AIRLINES  (KLM)
1 PP861–PP866 PP868–PP869 PP871–PP874 PW014
PW017 PW611–PW620
2 PP875–PP877 PW621–PW622
LAB  (LAB)
1P Q 3 0 3
2P Q 9 5 1
LAC  (CQC)
1 PY113
LACSA  (LAC)
1 PK357
LAM  (LAM)
1 PK749 PL456 PN451 PY031
LANCHILE AIRLINES  (LAN)
1 PG255 PJ006 PJ104–PJ106 PJ109
PK212 PK431 PK433 PK524–PK525
PK745 PK775 PK902 PK922–PK923
PK927 PL025 PL028

### Page 21

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 21 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
LAPA ARGENTINA  (LAZ)
1 PJ110–PJ111 PK051 PK253 PK616
LAUDA AIR  (LAL)
1P P 8 5 1 P W 7 0 1
2P W 7 0 2
LINA CONGO  (LNA)
1P J 0 3 2 P Y 4 1 1
LINEAS AEREAS AZTECA  (AZX)
1 PP802 PP983 PP986
LION AIR  (MLI)
1P K 5 1 1
LITHUANIAN AIRLINES  (LIJ)
1 PK632 PL611
2 PT972–PT973
LOGISTIC AIR, INC.  (LGA)
1 PY303–PY304
LOT POLISH AIRLINES  (LOT)
1 PT146–PT148 PT651–PT654
2 PQ978 PQ980 PT655–PT656 PV281–PV287
LUFTHANSA GERMAN AIRLINES  (DLH)
1 PQ054–PQ085 PQ092 PS701–PS703 PT331–PT360
2 PS704–PS706
LUXAIR  (LUX)
1 PT184 PT671 PW741–PW742
2P T 6 7 2
MACEDONIAN AIRLINES  (MDA)
2 PW526–PW527 PW771
MAERSK AIR  (MRS)
1 PT123–PT125
2 PT132–PT138
MAGIC CARPET AVIATION  (MCI)
1P P 9 9 1
MAGNICHARTERS  (MAM)
1 PJ004 PK143 PK145 PL454
PL554
MALAYSIA AIRLINES  (MAS)
1 PW201–PW213
2 PJ551–PJ561 PW214 PW217–PW230

### Page 22

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 22 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
MALEV HUNGARIAN AIRLINES  (HGA)
1 PM396 PM401 PM404–PM405 PM555–PM556
PW027 PW040
2P Q 2 9 8 P W 2 6 8
MANDALA AIRLINES  (MND)
1 PK354 PK463 PK614 PK636–PK637
PK874 PK924–PK925 PL027 PL061
PL421 PN002 PW004
MEKONG AIRLINES  (MEK)
2P T 9 7 1
MERPATI NUSANTARA AIRLINES  (PNM)
1 PK615 PK623–PK624 PK819 PK917
PK929–PK930 PW016 PW023
MEXICAN AIR FORCE  (MXA)
1P N 0 4 1
MEXICO'S PRESIDENTIAL AIRCRAFT  (MXG)
1 PC005 PP919
MNG AIRLINES  (MHK)
1 PW512 PW514 PW593
2P W 2 8 2 P W 2 8 5
MONDAIR S.A.  (MDB)
1 PP962 PP967
NAT AVIATION U.S.A.  (NTV)
1 PK258
NATIONWIDE AIRLINES  (NWR)
1 PK741 PK906 PK928 PK932
PL631–PL632 PN107 PN109
NIGERIA AIRWAYS  (NIA)
1 PL785 PL788
NORTHROP GRUMMAN CORPORATION  (GRU)
1P G 2 0 8
NORTHSTAR PRESIDIO MANAGEMENT  (INH)
1 PK094–PK095
NORWEGIAN AIR SHUTTLE AS  (NSB)
1 PM389 PM402 PP805–PP808
2P Q 9 8 3 P Q 9 8 5

### Page 23

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 23 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
OLYMPIC AIRWAYS  (OLY)
1 PK301–PK304 PK307–PK310 PM021–PM023 PW044
PW062–PW063 PW068 PW072 PW296
PW711–PW716
2 PR042 PW717
ORIX AVIATION SYSTEMS  (OXA)
2P T 1 2 7
PACE AIRLINES  (PIE)
1 PG075 PG203 PK221 PK732
PL502–PL503 PN102 PN116 PP196
PP835 PP837 PP867 PP870
2P S 9 5 7
PACIFICORP AIRFINANCE  (PHC)
1 PL558
PAKISTAN INT'L AIRLINES  (PIA)
1 PP281–PP286
PEGASUS AIRLINES  (PGS)
1P W 0 3 0
2P W 2 6 3
PEGASUS AVIATION, INC.  (PSS)
1 PK043 PK233 PK235 PK752
PK756–PK757 PL712 PN491
PERUVIAN AIR FORCE  (PRF)
1 PG251 PN082
2P T 5 1 7
PHILIPPINE AIRLINES  (PAL)
1 PM384–PM385 PM390 PM393 PS601
PW029 PW156
2 PM561 PQ803 PQ976
PHOENIX AVIATION  (PHX)
1 PG578–PG579 PK213–PK214 PK826 PK830
PHUKET AIRLINES  (PHK)
1 PG581–PG582 PN037 PN039
PLUNA  (PLU)
1 PL201–PL203 PQ287
PREMIER AIRCRAFT MANAGEMENT  (VEG)
2P S 6 2 6
PRIVATAIR  (PTS)
2P S 8 6 2

### Page 24

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 24 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
QANTAS  (QAN)
1 PQ001 PQ003–PQ006 PQ008 PQ010–PQ016
PQ293 PW293 PW531–PW544
2 PW545–PW550 PW557
QWEST AIR PARTS  (QWE)
1P G 4 3 8
REGION AIR  (RAE)
1 PP393 PQ038–PQ039
REGIONAL AIR  (AKN)
1 PK462 PK468 PK528 PK820
REPEX AIRLINES  (REX)
1 PY102 PY344
REPUBLIC FINANCIAL CORPORATION  (RFC)
1 PA011 PG199 PG225 PG433
PG502–PG503 PG622 PG704
REPUBLIC OF INDONESIA  (IDO)
1 PL601–PL603
REPUBLIC OF KOREA AIR FORCE  (KAF)
1 PP221
REPUBLIC OF NIGER  (NIR)
1 PY166
REPUBLIC OF VENEZUELA  (VNZ)
1 PK070
ROYAL AIR MAROC  (RAM)
1 PK271–PK272 PT581–PT583 PW631–PW633 PY671–PY672
2 PT584–PT586 PW634–PW637
ROYAL THAI AIR FORCE  (TAF)
1 PK519
2 PV296
RUTACA AIRLINES  (ZRU)
1 PK281 PK611
RYAN INTERNATIONAL AIRLINES  (RYN)
1 PK097 PK543 PN106
RYANAIR  (RYR)
1 PJ114–PJ115 PK502–PK504 PK801–PK804 PK821
PK824 PK901 PK903 PK911–PK912
PK914–PK916 PK921 PK974 PN001

### Page 25

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 25 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
RYM AIRLINES  (RYM)
1 PL017–PL019
SAFAIR  (SFA)
1P W 3 0 3
SAMCO AVIATION  (SMO)
1 PL581
SAT AIRLINES  (SKH)
1P G 2 1 4 P J 0 0 1
SATA INTERNACIONAL  (SIY)
1P P 3 9 1 P W 0 1 2
2P W 2 7 3
SAUDI ARABIAN AIRLINES  (SVA)
1 PK312–PK317 PL726–PL735 PY036–PY037
SAUDI ROYAL FLIGHT  (SRF)
1P K 3 1 8
SEB MANAGEMENT CORPORATION  (YNS)
1P T 2 1 9
SHANDONG AIRLINES  (SHG)
1 PM413–PM414 PP825–PP826
2 PQ391–PQ395 PR006 PR008
SHANTOU AIRLINES  (SHT)
2 PM415–PM417
SHEIKH MUSTAFA EDREES  (SME)
1 PL505
SHENZHEN AIRLINES  (SHZ)
1 PQ486 PS691–PS692
2 PS629 PS851–PS852
SIERRA PACIFIC AIRLINES  (SRP)
1 PK627 PL621
SIGMA AIRCRAFT MANAGEMENT  (SIF)
1 PT612–PT613
SKY AIRLINES  (SYC)
1 PV235 PW001 PW281
SKY KING  (SKN)
1 PG059 PK351–PK353 PK696

### Page 26

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 26 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
SKY SERVICE  (SSV)
1 PK526–PK527 PK971 PK973 PL736–PL737
PL740
SKYEUROPE  (SKP)
1P T 0 5 1
SKYNET AIRLINES  (SNF)
1P W 0 2 4 P W 1 2 0
SKYNET ASIA AIRWAYS  (SNU)
2 PW855–PW856
SKYWAYS  (SKQ)
1P G 3 0 7
SLOVAK AIRLINES  (SLV)
1 PP903
SOBELAIR  (SBL)
1 PP961 PS654 PW011 PW503
PW561 PW591 PW761
SOUTH AFRICAN AIRWAYS  (SAA)
1 PK731 PK733 PK742–PK743 PK746
PK771 PK774 PK776 PK904
PL101–PL113
SOUTHERN AIRCRAFT SERVICES  (HUZ)
1 PL471
SOUTHERN WINDS  (SOW)
1 PJ005 PK029 PK047
SOUTHWEST AIRLINES  (SWA)
1 PK082 PK550–PK560 PK621 PK628–PK630
PM051–PM066 PP101–PP159 PP161–PP169 PP188
PP190–PP193 PP201–PP205 PP301–PP304 PP351
PP353 PP376–PP382 PP402–PP403 PP501–PP502
PP727 PP731 PP803–PP804 PP821–PP824
PP827 PU001–PU025
2 PP160 PS751–PS799 PS901–PS941
SPORTS JET  (TSO)
1P W 5 6 3
STA SUPPLIES PTE. LTD.  (SSP)
1 PQ040–PQ041
STAR AIR  (SRH)
1 PK777 PL744 PL746 PN040
PN042–PN043

### Page 27

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 27 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
TAAG (ANGOLA AIRLINES)  (ANG)
1 PK661 PK664–PK666 PY162
TACA INTERNATIONAL AIRLINES  (TAC)
1 PJ007–PJ008 PK223 PK823 PK882
PL501 PL506
TACV-CABO VERDE AIRLINES  (TCV)
2P Q 4 4 7
TAF AEREAS LINHAS  (TFL)
1 PK118 PK146 PY323 PY342
TANS  (TAX)
1 PG253 PG351 PK113
TAROM - ROMANIAN AIR TRANSPORT  (TRM)
2 PQ931–PQ935 PR010
THAI AIRWAYS INTERNATIONAL  (TII)
1 PW161–PW162 PW164–PW166
2 PW167–PW171
THE PEGASUS AVIATION COMPANY  (PEG)
1P K 2 8 5 P K 8 2 7
TITAN AIRWAYS  (TIU)
2P S 6 2 0
TNT AIRWAYS  (TNB)
1P P 7 0 2
TRANSAERO AIRLINES  (TRX)
1 PK451–PK452 PK773 PK779 PP963
PP966
TRANSMILE AIR SERVICES  (TML)
1 PN472 PN474 PY151 PY381
TRAVEL SERVIS  (TSF)
1P W 0 0 6 P W 0 4 2
TRI-M.G. AIRLINES  (YDO)
1P Y 0 0 5
TRITON AVIATION SERVICES  (TIA)
1 PJ101 PJ103 PN101
TUNISAIR  (TUN)
1 PK861–PK863 PT641 PY621
2 PT642–PT644

### Page 28

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 28 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
TURKISH AIRLINES  (THY)
1 PM552–PM553 PM557 PT056–PT057 PW045
PW049–PW050
2 PM559–PM560 PM562–PM564 PW287 PW290–PW291
TURKMENISTAN AIRLINES  (TUE)
1P Q 2 6 5
2 PQ801–PQ802
UKRAINE INTERNATIONAL AIRLINES  (UKR)
1 PM551 PN405 PQ251 PT055
PT059 PW037
2P R 1 8 1
UNICAPITAL AIR GROUP  (UAG)
1 PK695
UNITED AIRLINES  (UAL)
1 PG024 PG052 PG054–PG055 PG057
PG067 PG069–PG071 PK201–PK202 PL002–PL016
PL020–PL022 PQ101–PQ199 PQ201–PQ202 PT381–PT399
PT401–PT429
2 PT430–PT438
UNITED STATES NAVY  (USN)
1 PK591 PK595
US AIR FORCE  (USF)
1 PJ201–PJ203 PJ206 PJ211 PJ213–PJ217
PJ219
US AIRWAYS  (USA)
1 PK288 PK597 PK601 PK603–PK604
PK609 PK883 PM114 PN032
PP001 PP003–PP010 PP012–PP020 PP024–PP028
PP030–PP032 PP034–PP054 PP401 PP404–PP440
PV001–PV010 PV012–PV055
VARIG AIRLINES  (VAR)
1 PK111–PK112 PK114 PK116 PK119–PK120
PK144 PK211 PP839 PP905–PP906
PP917 PP921–PP922 PP927 PP946
PP981–PP982 PP987–PP990 PQ227 PQ256–PQ260
PQ262 PQ266–PQ267 PQ290 PQ331
PS603 PT058 PT211–PT213 PT216–PT218
PT220
2 PR043–PR044 PR132 PS619 PS624
PS627 PS872 PT721–PT725 PT854

### Page 29

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 29 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
VASP AIRLINES  (VSP)
1 PG435 PG437 PG439–PG440 PG471–PG473
PH011–PH013 PK061 PK065–PK067 PK356
PK521 PK523 PK581 PL756
PP512–PP513 PP984 PX071 PY286
2P S 8 6 3
VIRGIN BLUE AIRLINES  (VOZ)
1P P 9 2 4
VIRGIN EXPRESS AIRLINES  (EBA)
1 PS656 PV231 PW013 PW033
PW571–PW572
2 PQ984 PQ989 PQ993 PS625
PS972 PW271 PW275
VOLVO AERO SERVICES (SHANNON)  (SLM)
1 PG204 PG278
VSA AVIATION CC  (VSA)
1P Y 6 1 2
WELLS FARGO  (FSB)
1 PL741
WESTAIR  (WSA)
1P K 0 4 1
WESTJET  (WJI)
1 PJ108 PJ113 PK092–PK093 PK241
PK283 PK305 PK544 PK547
PK565 PK622 PK691 PK711–PK716
PL171 PL761–PL762
XIAMEN AIRLINES  (XIA)
1 PM255 PT026
2 PQ295–PQ296 PQ471 PQ493 PT027–PT028
PT030–PT031
YEMENIA  (YEM)
1P Y 4 1 0
IDENTIFICATION BY VARIABLE NUMBER
Variable  Group
PA001–PA022 1
PA099 1
PA231–PA232 1
PC001–PC005 1
PG001–PG075 1
PG199 1

### Page 30

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 30 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PG201–PG230 1
PG251–PG255 1
PG271–PG279 1
PG301–PG314 1
PG331–PG332 1
PG351–PG356 1
PG375 1
PG401–PG403 1
PG431–PG442 1
PG471–PG475 1
PG501–PG505 1
PG571–PG586 1
PG621–PG630 1
PG651–PG652 1
PG701–PG705 1
PH001 1
PH011–PH013 1
PH021–PH024 1
PH701–PH715 1
PH731–PH732 1
PH741–PH743 1
PJ001–PJ009 1
PJ031–PJ032 1
PJ071–PJ072 1
PJ101–PJ119 1
PJ201–PJ219 1
PJ301–PJ302 1
PJ551–PJ561 2
PJ601–PJ615 2
PJ811 2
PJ816–PJ817 2
PK026–PK029 1
PK041–PK053 1
PK061–PK070 1
PK081–PK082 1
PK091–PK099 1
PK101–PK103 1
PK111–PK120 1
PK141–PK146 1
Variable  Group

### Page 31

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 31 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PK201–PK204 1
PK211–PK223 1
PK231–PK241 1
PK251–PK258 1
PK271–PK274 1
PK281–PK289 1
PK291 1
PK301–PK318 1
PK341 1
PK351–PK361 1
PK391 1
PK431–PK433 1
PK451–PK452 1
PK461–PK469 1
PK495 1
PK501–PK504 1
PK511–PK515 1
PK519 1
PK521–PK528 1
PK541–PK565 1
PK581 1
PK591–PK599 1
PK601–PK617 1
PK621–PK637 1
PK641–PK642 1
PK661–PK666 1
PK671–PK681 1
PK691–PK697 1
PK711–PK716 1
PK731–PK765 1
PK771–PK779 1
PK801–PK804 1
PK819–PK827 1
PK830 1
PK861–PK863 1
PK871–PK874 1
PK881–PK884 1
PK901–PK938 1
PK971–PK974 1
Variable  Group

### Page 32

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 32 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PL001–PL028 1
PL061 1
PL081 1
PL101–PL113 1
PL151 1
PL171–PL172 1
PL201–PL203 1
PL221 1
PL401–PL417 1
PL421 1
PL441 1
PL451–PL456 1
PL471 1
PL491 1
PL501–PL506 1
PL551–PL562 1
PL581 1
PL601–PL603 1
PL611 1
PL621–PL626 1
PL631–PL632 1
PL711–PL712 1
PL716–PL747 1
PL756 1
PL758 1
PL761–PL770 1
PL781–PL788 1
PL793 1
PL801–PL803 1
PM001–PM006 1
PM016–PM017 1
PM021–PM023 1
PM051–PM066 1
PM101–PM119 1
PM141–PM142 1
PM171 1
PM181 1
PM251–PM255 1
PM281–PM283 1
Variable  Group

### Page 33

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 33 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PM381–PM399 1
PM401–PM414 1
PM415–PM417 2
PM541–PM550 2
PM551–PM558 1
PM559–PM564 2
PN001–PN002 1
PN021–PN043 1
PN081–PN086 1
PN101–PN117 1
PN131–PN163 1
PN401–PN420 1
PN431–PN433 1
PN451–PN456 1
PN471–PN474 1
PN481 1
PN491–PN493 1
PN501–PN502 1
PN511–PN512 1
PN521 1
PP001–PP054 1
PP101–PP159 1
PP160 2
PP161–PP169 1
PP181–PP199 1
PP201–PP205 1
PP221 1
PP231–PP243 1
PP281–PP286 1
PP301–PP305 1
PP351–PP353 1
PP376–PP384 1
PP391–PP393 1
PP401–PP440 1
PP471–PP475 1
PP501–PP517 1
PP518–PP520 2
PP521–PP522 1
PP631–PP634 1
Variable  Group

### Page 34

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 34 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PP651–PP652 1
PP671–PP699 1
PP701–PP733 1
PP771–PP779 1
PP801–PP808 1
PP821–PP827 1
PP831–PP848 1
PP851–PP852 1
PP861–PP874 1
PP875–PP877 2
PP891–PP899 1
PP901–PP936 1
PP946–PP948 1
PP951–PP952 1
PP961–PP967 1
PP981–PP991 1
PP993 1
PQ001–PQ016 1
PQ026–PQ041 1
PQ051–PQ092 1
PQ101–PQ199 1
PQ201–PQ202 1
PQ221–PQ237 1
PQ241–PQ243 1
PQ251–PQ267 1
PQ281–PQ294 1
PQ295–PQ299 2
PQ301–PQ307 1
PQ331–PQ332 1
PQ341–PQ344 1
PQ345–PQ348 2
PQ361–PQ367 1
PQ368–PQ373 2
PQ391–PQ395 2
PQ401–PQ404 1
PQ405–PQ410 2
PQ411–PQ413 1
PQ414–PQ418 2
PQ421 1
Variable  Group

### Page 35

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 35 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PQ431–PQ438 2
PQ447–PQ448 2
PQ451 2
PQ454 2
PQ471–PQ475 2
PQ479–PQ481 2
PQ486 1
PQ487 2
PQ491–PQ492 1
PQ493 2
PQ771–PQ772 2
PQ791–PQ793 2
PQ801–PQ805 2
PQ931–PQ935 2
PQ951 2
PQ971–PQ997 2
PR001–PR017 2
PR021–PR034 2
PR041–PR045 2
PR061–PR072 2
PR077–PR082 2
PR091–PR092 2
PR096 2
PR101 2
PR121–PR122 2
PR131–PR132 2
PR141–PR143 2
PR161–PR172 2
PR181 2
PS601–PS616 1
PS617–PS630 2
PS631 1
PS636–PS638 1
PS641–PS644 1
PS651–PS657 1
PS666–PS669 1
PS691–PS692 1
PS701–PS703 1
PS704–PS706 2
Variable  Group

### Page 36

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 36 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PS751–PS799 2
PS811 2
PS836–PS837 2
PS841–PS846 2
PS851–PS852 2
PS856 2
PS861–PS863 2
PS866–PS868 2
PS871–PS874 2
PS896–PS897 2
PS901–PS941 2
PS956–PS957 2
PS961–PS963 2
PS971–PS978 2
PT001–PT010 1
PT011–PT015 2
PT021–PT026 1
PT027–PT031 2
PT041–PT059 1
PT060–PT064 2
PT101–PT105 1
PT121–PT125 1
PT126–PT138 2
PT146–PT148 1
PT161–PT168 1
PT169–PT170 2
PT181–PT187 1
PT188 2
PT211–PT220 1
PT295 1
PT301–PT302 1
PT303–PT309 2
PT331–PT360 1
PT381–PT399 1
PT401–PT429 1
PT430–PT438 2
PT501–PT509 1
PT510–PT517 2
PT561–PT565 1
Variable  Group

### Page 37

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 37 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PT581–PT583 1
PT584–PT586 2
PT611–PT621 1
PT641 1
PT642–PT644 2
PT651–PT654 1
PT655–PT656 2
PT671 1
PT672 2
PT681–PT685 2
PT701–PT703 1
PT716–PT717 2
PT721–PT725 2
PT801–PT834 2
PT851–PT854 2
PT871–PT886 2
PT901–PT930 2
PT971–PT973 2
PT981–PT985 2
PT996 2
PU001–PU025 1
PU301 2
PU311–PU313 2
PV001–PV055 1
PV201–PV202 1
PV203–PV209 2
PV226–PV229 2
PV231–PV237 1
PV271–PV272 1
PV281–PV287 2
PV296 2
PV301–PV302 2
PV351 2
PV356–PV357 2
PW001–PW054 1
PW061–PW068 1
PW072 1
PW086–PW088 2
PW091–PW094 1
Variable  Group

### Page 38

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PW101 1
PW102 2
PW106 2
PW111–PW120 1
PW156–PW157 1
PW161–PW166 1
PW167–PW171 2
PW201–PW213 1
PW214–PW230 2
PW231–PW238 1
PW239–PW252 2
PW261 1
PW262–PW264 2
PW265 1
PW266–PW268 2
PW271–PW276 2
PW278 2
PW281 1
PW282–PW292 2
PW293 1
PW296 1
PW301–PW319 1
PW320–PW327 2
PW401–PW408 2
PW411–PW418 2
PW421–PW424 2
PW431–PW435 2
PW441–PW450 2
PW461–PW467 2
PW501–PW504 1
PW511–PW520 1
PW521–PW522 2
PW524–PW530 2
PW531–PW544 1
PW545–PW550 2
PW556–PW557 2
PW561–PW564 1
PW571–PW576 1
PW591–PW596 1
Variable  Group

### Page 39

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 39 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
PW611–PW620 1
PW621–PW622 2
PW631–PW633 1
PW634–PW637 2
PW661–PW662 1
PW681–PW683 1
PW701 1
PW702 2
PW711–PW716 1
PW717 2
PW741–PW742 1
PW761 1
PW771 2
PW831 2
PW851–PW856 2
PX071 1
PX701 1
PY001–PY008 1
PY021–PY022 1
PY031 1
PY036–PY037 1
PY046–PY048 1
PY051–PY053 1
PY056–PY057 1
PY101–PY103 1
PY111–PY113 1
PY131–PY135 1
PY141–PY143 1
PY151–PY154 1
PY156–PY157 1
PY161–PY162 1
PY166 1
PY191 1
PY201 1
PY221–PY222 1
PY231 1
PY241–PY244 1
PY270–PY275 1
PY281 1
Variable  Group

### Page 40

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 40 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Four operators have reported cracks in the forward cargo door. The cracks occurred in the web and 
the T-chord of the number 4 cross beam. Cracks in the cross beam web were up to 1 inch long. Cracks 
in the T-chord were up to 1.3 inches long. Airplanes had accumulated between 41,000 and 79,000 
flight cycles.       
A crack in the number 4 cross beam combined with a crack in the number 5 cross beam on the forward 
cargo door may result in a rapid loss of cabin pressure. If cracks occur in the number 5 cross beam it 
will increase the load in the number 4 cross beam and could cause it to crack prematurely. Cracking 
in the number 5 cross beam is covered in the subject of Alert Service Bulletin 737-52A1100.    
Boeing Structural Item Interim Advisory (SIIA) 737-287 is related to this service bulletin.
Boeing Service Related Problem (SRP) 737-SRP-52-0070 is related to this service bulletin.
PY286 1
PY301–PY304 1
PY321–PY323 1
PY341–PY346 1
PY361–PY362 1
PY381 1
PY401 1
PY409–PY411 1
PY421–PY422 1
PY441 1
PY451 1
PY461–PY463 1
PY591–PY595 1
PY611–PY612 1
PY621 1
PY631 1
PY651 1
PY671–PY672 1
PY721 1
PY741 1
Variable  Group

### Page 41

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 41 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
As a part of a service bulletin validation program, this change was completed on airplane PW317 by 
Service Bulletin 737-52-1149 Validation Copy 01 before the initial release of this service bulletin.  The 
change completed on airplane PW317 by Service Bulletin 737-52-1149 Validation Copy 01 is 
equivalent to the initial release of this service bulletin.  Airplane PW317 has the configuration of a 
Group 1 airplane.
D. Description
This Service Bulletin is divided into 2 Groups. Group 1 airplanes have forward cargo doors with a 
bonded inner skin and Group 2 airplanes have forward cargo doors with a chemically milled inner skin. 
On the forward cargo door do a visual inspection and High Frequency Eddy Current (HFEC) 
inspection for cracks in the number 4 cross beam web, the T-chord flange and the T-chord root radius. 
If no cracks are found install the cross beam preventative modification or repeat the inspection at the 
given intervals. If cracks are found in the cross beam web or the T-chord, install the cross beam web 
and T-chord repair.
It is recommended that Boeing service bulletin 737-52A1100 and this service bulletin be incorporated 
concurrently. Since both service bulletins remove fasteners in the door frame and inner skin, 
concurrent incorporation will minimize rework to these parts. If 737-52A1100 is worked concurrently, 
partially remove inner skin to gain access instead of cutting access holes as specified in this bulletin. 
Reassemble the inner skin with production fasteners or approved substitutes. These fasteners are not 
included in the supplied kit.       
Note that service bulletin 737-52A1100 is mandated by Airworthiness Directive 2000-07-06. If 
incorporation of this service bulletin results in changes that affect incorporation of service bulletin 
737-52A1100, it may be necessary to seek alternate means of compliance (AMOC) for the 
Airworthiness Directive.

### Page 42

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 42 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
E. Compliance
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes 
specified in this service bulletin comply with the applicable Federal Aviation Regulations (FAR) and 
are FAA approved. This service bulletin and the FAA approval were based on the airplane in its 
original Boeing delivery configuration or as modified by other FAA approved Boeing changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected 
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency 
approval before incorporating this service bulletin.
Table 1 - Inspection for cracks in the Number 4 Cross Beam on the Forward Cargo Door
Inspection
Options (a)
Airplane Flight Cycles 
After the Date of this 
Service Bulletin (b)  
Repeat Interval Not to 
Exceed (Flight Cycles)
Visual (as given in 
Accomplishment Instructions, 
3.B. - Parts 1 and 4)
9,000 4,500
Eddy-current (as given in 
Accomplishment Instructions, 
3.B. - Parts 1 and 4)
9,000 20,000
(a) Either Visual or Eddy current inspections are required. If cracks are found during 
inspection, refer to Accomplishment instructions Parts 2 and 5 for repair. Cracks must 
be repaired before further flight.
(b) If an operator has sufficient evidence to show that a forward cargo door was never 
removed from the original airplane, or if an operator has sufficient evidence to show 
that a forward cargo door was removed from another airplane, or ordered from Boeing 
as a spare and that the door flight cycles were recorded independently from the 
airplane flight cycles, then the operator can contact the FAA and request approval to 
begin the inspections on that door at or before accumulation of 35,000 door flight 
cycles.

### Page 43

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 43 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
G. Manpower
The table below shows an estimate of the task-hours necessary to do this inspection/repair for each 
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with 
operator task-hour data if necessary. The estimate does not include lost time. These are some 
examples of lost time:
— Time to adjust to the workplace
— Time to schedule the work
— Time to examine the work
— Time to cure the materials
— Time to make the parts
— Time to find the tools.
Task
Number of 
Persons Task-Hours Elapsed Hours
Open Access 2 8 4
Examine 2 4 2
Modification 2 48 24
Close/Adjust 2 12 6
TOTAL FOR EACH AIRPLANE 72 36
Note: Additional time will be required to accomplish this bulletin if the repair is 
done.

### Page 44

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 44 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
H. Weight and Balance Changes
Table 1 - Weight and Balance changes for the Repair of the Number 4 Cross Beam 
(Group 1 Airplanes)
Airplane
Change in Weight 
(Pounds)
Change in Moment 
(Pound-Inches)
737-100 + 6 + 2910
737-200 + 6 + 2695
737-200C + 6 + 2695
737-300 + 6 + 2430
737-400 + 6 + 2000
737-500 + 6 + 2750
Table 2 - Weight and Balance changes for the Preventative Modification of the Number 4
Cross Beam (Group 1 Airplanes)
Airplane
Change in Weight 
(Pounds)
Change in Moment 
(Pound-Inches)
737-100 + 5 + 2425
737-200 + 5 + 2245
737-200C + 5 + 2245
737-300 + 5 + 2025
737-400 + 5 + 1665 
737-500 + 5 + 2295
Table 3 - Weight and Balance changes for the Repair of the Number 4 Cross Beam 
(Group 2 Airplanes)
Airplane
Change in Weight 
(Pounds)
Change in Moment 
(Pound-Inches)
737-100 + 3 + 1455
737-200 + 3 + 1345
737-200C + 3 + 1345
737-300 + 3 + 1215
737-400 + 3 + 1000
737-500 + 3 + 1375

### Page 45

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 45 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data:
a. Service Related Problem (SRP) 737-SRP-52-0070.
b. 737-100/-200 Airplane Maintenance Manual (AMM) Subject 52-31-0 and 737-300/-400/-500 
(AMM) Subject 52-31-00.
c. 737-100/-200 Structural Repair Manual (SRM) Subject 51-00-6, 51-10-02, 51-20-04, 
51-30-02, 51-30-05 and 737-300/-400/-500 (SRM) Subject 51-00-06, 51-20-01, 51-20-05, 
51-40-02 and 51-40-05.
d. 737 Non-Destructive Testing (NDT) Manual, Part 6, Subject 51-00-00, Figures 1, 4, 11, 16 
and 23.
e. 737 Structural Item Interim Advisory (SIIA) 737-287.
f. Boeing Standard Overhaul Practices Manual (BSOPM) Subject 20-41-02, 20-50-12. 
g. Boeing Service Bulletins, 
737-52A1100 Revision 4 - Forward Cargo Door, Lower Forward and Aft Corner Inspection, 
Modification and Replacement.
Table 4 - Weight and Balance changes for the Preventative Modification of the Number 4
Cross Beam (Group 2 Airplanes)
Airplane
Change in Weight 
(Pounds)
Change in Moment 
(Pound-Inches)
737-100 + 2 + 970
737-200 + 2 + 900
737-200C + 2 + 900
737-300 + 2 + 810
737-400 + 2 + 665
737-500 + 2 + 920

### Page 46

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 46 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
2. Data supplied with this Service Bulletin:
a. Drawings:
3. Installation Drawings Used in the Preparation of this Service Bulletin:
None.
K. Publications Affected
None.
L. Interchangeability and Intermixability of Parts
Refer to Paragraph 2.C., Parts Necessary For Each Airplane, for interchangeability and intermixability 
information.
Drawing Number Title Sheets DCN ADCN
65C37518 Top Kit - Cross Beam Number 4 
Modification, Fwd Cargo Door
1- -
2- -
3- -
4- -
5- -
6- -
7- -
8- -
9- -
10 - -
11 - -
12 - -

### Page 47

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
2. MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits/parts shown in Paragraph 2.C., Parts Necessary For Each Airplane as 
shown below.  If there is a limit in the quantity (QTY) of kits/parts, a supply sequence is given by 
Spares.  
The kits/parts are subject to the terms and conditions of the Boeing standard purchase order 
acknowledgment. After the Unit Price date, new price and ROLT data is applicable. Prices are in 
United States dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:  
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington   98124-2207
B. Industry Support Information
Boeing warranty remedies are not available for the configuration changes inspection and/or repair 
given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts:
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Note: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the 
Kit Number Name Date QTY
Unit Price thru
10/31/03
65C37518-1 Top Kit - Cross Beam 4 
Repair/Modification 
Fwd Cargo Door 
(Bonded inner skin)
4/25/03 1 $4,662
65C37518-3 Top Kit - Cross Beam 4 
Repair/Modification 
Fwd Cargo Door (Chem 
milled inner skin)
4/25/03 1 $4,400

### Page 48

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 48 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
Operator, are necessary for each airplane. 
Kit Number 65C37518 - Cross Beam Number 4 Repair/Modification    
New Part Number
QTY
Name Notes-4 -3 -2 -1
65C37518-1 . . . - Top Kit - Cross Beam 4, Mod (a)
65C37518-2 . . - 1 Sub Kit - Parts Collector 
65C37518-3 . - . . Top Kit - Cross Beam 4, Mod (b)
65C37518-4 - 1 . . Sub Kit - Parts Collector
65C37518-101 1 . 1 . Channel, Fwd
65C37518-103 1 . 1 . Channel, Aft
65C37518-105 2 . 2 . Filler
65C37518-107 2 . 2 . Filler
65C37518-111 . . 1 . Cover, Fwd
65C37518-113 . . 1 . Cover, Aft
65C37518-115 1 . 1 . Angle, Fwd
65C37518-117 1 . 1 . Angle, Aft
65C38364-19 1 . 1 . T-Chord, Fwd
65C38364-22 1 . 1 . T-Chord, Aft
BACB30MY8K6X 2 . 2 . Bolt (d)
BACB30MY8K7X 6 . 6 . Bolt (d)
BACB30MY8K8X 4 . 4 . Bolt (d)
BACB30NW6K4Y 2 . 2 . Bolt (d)
BACB30NX6K3Y 61 . 38 . Bolt (c) (d)
BACB30NX6K4Y 27 . 16 . Bolt (c) (d)
BACB30NX6K6Y . . 2 . Bolt (d)
BACB30NX8K7X 8 . 8 . Bolt (d)
BACB30VH06CD03S 87 . . . Bolt, Blind (c) (d)
BACB30VH06CD04S 53 . 2 . Bolt, Blind (c) (d)
BACB30VH06CD05S 6 . . . Bolt, Blind (d)
BACB30VH06CD06S 24 . . . Bolt, Blind (c) (d)
BACB30VT5HK2 . . 177 . Bolt (c) (d)
BACB30VT6K2 4 . 4 . Bolt (d)
BACB30VT6K3 40 . 47 . Bolt (c) (d)
BACB30VT6K4 16 . 12 . Bolt (d)
BACB30VT6K5 . . 8 . Bolt (d)
BACB30VT6K6 24 . 10 . Bolt (c) (d)
BACB30VT8K7 . . 2 . Bolt (d)
BACB30YP6K3 24 . 24 . Bolt (c) (d)
BACC30AB6CY 90 . 60 . Collar (c)

### Page 49

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 49 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
BACC30BL5 . . 177 . Collar (c)
BACC30BL6 84 . 81 . Collar (c)
BACC30BL8 . . 2 . Collar
BACC30BS6S 24 . 24 . Collar (c)
BACC30M8 12 . 12 . Collar
BACC30X8 8 . 8 . Collar
BACF3F009G047NN 2 . 2 . Filler, Flat
BACF3F010D083NN . . 1 . Filler, Flat
BACF3F010D101NN . . 1 . Filler, Flat
BACF3F038G044NN 1 . 1 . Filler, Flat
BACF3F038G045NN 1 . 1 . Filler, Flat 
BACF3T01B30-09 . . 1 . Filler, Tapered 
BACF3T01C18-12 . . 1 . Filler, Tapered
BACF3T01C18-25 . . 1 . Filler, Tapered
BACR15DS7D7 2 . 2 . Rivet (d)
BACR15FT6D7C 2 . . . Rivet (d)
BACR15FT6D8C 37 . . . Rivet (c) (d)
BACR15FT6D9C 2 . . . Rivet (d)
BACR15GF6D3 22 . 1 . Rivet (d)
BACR15GF6D5 4 . 4 . Rivet (d)
BACS40R008C103F 2 . 2 . Shim, Laminated 
NAS1200M6-6P 16 . 16 . Rivet (d)
(a) Group 1 airplanes. 
(b) Group 2 airplanes.
(c) There are more parts than are necessary.
(d) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip 
length longer than indicated. Also, if any fasteners part numbers listed are not available 
or have been superseded, substitute fasteners may be supplied in kits. Boeing 
Document D-590 and Boeing Drawing 65-88700 are used to determine the part 
numbers used as substitutes.
Kit Number 65C37518 - Cross Beam Number 4 Repair/Modification    
New Part Number
QTY
Name Notes-4 -3 -2 -1

### Page 50

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 50 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
2. Parts and Materials Supplied by the Operator:
3. Parts Modified and Reidentified:
4. Parts Removed and Not Replaced:
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, 
maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be 
necessary. Examine operator tool supply to make sure all necessary tools are available.
Part Number / Specification QTY Name Notes
BMS 5-95, Type 1, 
Class B-1/2 or -2     
1 Pint Sealant (a) (b)
BMS 10-11, Type 1 1 Pint Primer (a)
MIL-C-5541
(Alodine 1200S) 
1 Pint Chemical Conversion Coating
(a) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for
supplier data.
(b) Refer to Boeing Standard Overhaul Practices Manual (BSOPM) 20-50-12. 
Existing Part 
Number QTY Name
New Part 
Number Notes
65-46921-1 1 Forward Cargo Door Assembly - (a) 
65-46921-132 1 Forward Cargo Door Assembly - (a) 
65-46921-160 1 Forward Cargo Door Assembly - (a) 
65-46921-225 1 Forward Cargo Door Assembly - (a) 
65-46921-230 1 Forward Cargo Door Assembly - (a) 
65-46921-528 1 Forward Cargo Door Assembly - (a) 
(a) There is no equivalent Boeing part number for the changed part. Identify on the part 
that the change given in this service bulletin was made.

### Page 51

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 51 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
3. ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED
MATERIAL, METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES
CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE
SPARKS OR OTHER ELECTRICAL DAMAGE.
Note:
1. Manual titles are referred to by acronyms.  Refer to Paragraph 1.J., References, for 
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
— Linear dimensions are in inches
— Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or 
minus 0.03 inch.
— Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
— Angular tolerance is plus or minus 2 degrees
— Hole dimensions for standard solid rivets are given in 737 Structural Repair Manual, 
Chapter 51
— Torque limits to tighten nuts and bolts are given in 737 Structural Repair Manual, 
Chapter 51.
4. For approved fastener and process material substitutions, refer to 737 Structural Repair 
Manual, Chapter 51,  Alternate fasteners are given in 737 Structural Repair Manual 
Chapter 51 and Boeing Drawing 65-88700.
5. If the length of fasteners specified in this service bulletin do not meet the installation 
standards, fasteners of the same specification, or an approved substitute, one grip length 
longer or shorter may be used.
Note: The following inspection used in this service bulletin is defined as follows:
DETAILED INSPECTION - is an intensive examination of a specific item, installation or 
assembly to detect damage, failure or irregularity. Available lighting is normally supplemented 
with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such 
as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate access 
procedures may be required.

### Page 52

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 52 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
B. WORK INSTRUCTIONS
PART 1 - INSPECTION (GROUP 1 AIRPLANES)
1. Close or remove the forward cargo door (reference 737-100/-200 AMM Subject 52-31-0 and 
737-300/-400/-500  AMM  Subject  52-31-00).        
2. Get access through the inner skin lightening holes of the door. Do a visual detailed or High 
Frequency Eddy Current (HFEC) Inspection for cracks in the number 4 cross beam web, 
outboard chord and T-chord radius as shown in Figure 1.      
3. If cracks are found on the number 4 cross beam, repair the cross beam reference Part 2 - Repair.      
4. If no cracks are found, continue to do repeat visual detailed and HFEC inspections at the intervals 
shown in the table in paragraph 1E - Compliance. As an option to the repeat inspections, do the 
preventative modification as given in step 5 below.             
5. Before the installation of the preventative modification, do as follows: 
a. Remove fasteners and do a HFEC inspection as given in NDT Manual Part 6, 51-00-00 
Figures 1, 11 and 16 of the fastener holes.  
b. Do a HFEC surface inspection of the T-chord root radius at the forward and aft ends of the 
cross beam as given in 737 NDT  Manual Part 6, 51-00-00 Figures 4 or 23 and as shown 
on drawing 65C37518, sheet 2, view 1B5, zone A3 and in Figure 1.
Note: Do this inspection only if it hasn’t been done in Part 1 - paragraph 2.
c. If no cracks are found, install the preventative modification at the forward and aft ends of the 
cross beam reference Part 3 - Preventative Modification. 
d. If cracks are found, do the repair reference Part 2 - Repair. 
PART 2 - REPAIR (GROUP 1 AIRPLANES - USE TOP KIT 65C37518-1) 
1. Remove the forward cargo door (reference 737-100/-200 AMM Subject 52-31-0 and 
737-300/-400/-500 AMM Subject 52-31-00). 
2. Get access to the number 4 cross beam web of the forward cargo door. Do as follows:    
a. Mark out the access holes as given in drawing 65C37518, sheet 1, view 1A2, zones C4 and 
C7.  
b. Remove the fasteners that attach the skin and strap to the number 4 cross beam locally in 
the area of the new access holes marked out in previous step. Approximately 17 rivets on 
the forward end (starting at the fourth rivet in from the forward end of the door) and 13 rivets 
on the aft end (starting at the fourth rivet in from the aft end of the door).

### Page 53

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 53 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
WARNING: PULL STRAP AWAY FROM INNER SKIN TO ALLOW ACCESS FOR TRIMMING.
PROTECT CROSS BEAM FROM DAMAGE WHEN TRIMMING THE INNER SKIN.
FAILURE TO PROTECT ADJACENT STRUCTURE COULD RESULT IN COSTLY
REPAIR.
CAUTION: IF 737-52A1100 IS BEING WORKED CONCURRENTLY REMOVE INNER SKIN
FASTENERS AND PARTIALLY REMOVE INNER SKIN TO GAIN ACCESS
INSTEAD OF CUTTING THE ACCESS HOLES. REASSEMBLE THE INNER SKIN
WITH PRODUCTION FASTENERS OR APPROVED SUBSTITUTES. THE
REPLACEMENT  FASTENERS ARE NOT INCLUDED IN THE SUPPLIED KIT. 
c. Trim the inner skin to create access holes as given in drawing 65C37518, sheet 1, view 1A2, 
zone C7 and zone C4. 
Note: Maintain a minimum edge margin of 0.38 inches for all fastener holes.
d. Finish trim edges using chemical conversion coating (reference 737-100/-200 SRM 
51-10-02 or 737-300/-400/-500 SRM 51-20-01). Apply two coats of primer (reference BMS 
10-11, Type 1. Refer to BSOPM 20-41-02).
3. Remove fasteners common to the forward end of the cross beam as given in 65C37518, sheet 
2, view 1C10-1, zone B7 and sheet 1, view 2A2, zone A11 (reference 737-100/200 SRM 
51-30-02 or 737-300/-400/-500 SRM 51-40-02).   
4. Remove fasteners common to the aft end of the cross beam as given in drawing 65C37518, 
sheet 2, view 1C15-1, zone B9 and sheet 1, view 5A2, zone A14 (reference 737-100/200 SRM
51-30-02 or 737-300/-400/-500 SRM 51-40-02).
5. Remove the door handle and the access cover as given in drawing 65C37518 sheet 1, view 1A2, 
zone C5. Retain attachment bolts.  
CAUTION: PROTECT THE INNER CHORD AND OUTER SKIN FROM DAMAGE WHILE
TRIMMING. FAILURE TO PROTECT THE INNER CHORD AND OUTER SKIN COULD
RESULT IN COSTLY REPAIR. 
6. Trim the beam web and outer T-chord at the forward end of the cross beam as given in drawing 
65C37518, sheet 2, view 1C10-1, zone B7 and sheet 2, view 1C5, zone D6. 
Note: Angle the trim line to clear the fastener location in the inner skin when trimming the beam 
web.
7. Trim the beam web and outer T-chord at the aft end of the cross beam as given in drawing 
65C37518, sheet 2, view 1C15-1, zone B9 and sheet 2, view 1C11, zone D10. 
Note: Angle the trim line to clear the fastener location in the inner skin when trimming the beam 
web.
8. Repair finish on the trimmed edges of the beam web and outer T-chord at the forward and aft end 
of the cross beam using chemical conversion coating (reference 737-100/-200 SRM 51-10-02 or 
737-300/-400/-500 SRM 51-20-01). Apply two coats of primer (reference BMS 10-11, Type 1. 
Refer to BSOPM 20-41-02).

### Page 54

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 54 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
9. Remove the latch torque tube if required to get access at the forward end of the cross beam as 
given in drawing 65C37518, sheet 1, view 2A2, zone B10. 
10. Remove the latch torque tube if required to get access at the aft end of the cross beam as given 
in drawing 65C37518, sheet 1, view 5A2, zone B14. 
11. Position T-chord 65C38364-19, fillers BACF3F038G044NN and BACF3F009G047NN, angle 
65C37518-115, channel 65C37518-101 and fillers 65C37518-105/-107 at the forward end of the 
cross beam as shown in figure 2 and as given in drawing 65C37518 sheet 2, view 1C10-1, zone 
B7 and sheet 2, view 1C5, zone D6. Use BACS40R008C103F shims if required to fill gaps 
greater than 0.010 inches between the channel and beam inner chord. Peel the shim as required 
to get the necessary thickness. Shim thickness should not exceed 0.10 inches. Minimum edge 
margin is 0.38 inches. Finish laminated shims with primer (reference BMS 10-11, Type 1. Refer 
to BSOPM 20-41-02).
12. Position T-chord 65C38364-22, fillers BACF3F038G045NN and BACF3F009G047NN, angle 
65C37518-117, channel 65C37518-103 and fillers 65C37518-105/-107 at the aft end of the cross 
beam as shown in figure 2 and as given in drawing 65C37518, sheet 2, view 1C15-1, zone B9 
and sheet 2, view 1C11, zone D10. Use BACS40R008C103F shims if required to fill gaps greater 
than 0.010 inches between the channel and beam inner chord. Peel the shim as required to get 
the necessary thickness. Shim thickness should not exceed 0.10 inches. Minimum edge margin 
is 0.38 inches. Finish laminated shims with primer (reference BMS 10-11, Type 1. Refer to 
BSOPM 20-41-02). 
13. Drill fastener holes at the forward end of the cross beam as given in drawing 65C37518 sheet 2, 
views 1C10-1, zone B7, 1C5, zone D6 and on sheet 1, view 1A2, zone C7. Refer to drawing 
65C37518 sheet 5 for remaining hole positions in channel 65C37518-101 and sheet 7 for filler 
65C37518-105.    
Note: The fasteners and hole sizes are shown on drawing 65C37518, sheet 1, zone D2 
(reference 737-100/-200 SRM 51-30-05 or 737-300/-400/-500 SRM 51-40-05).
14. Drill fastener holes at the aft end of the cross beam as given in drawing 65C37518 sheet 2, views 
1C15-1, zone B9, 1C11, zone D10 and on sheet 1, view 1A2, zone C4. Refer to drawing 
65C37518 sheet 6 for remaining hole positions in channel 65C37518-103 and sheet 7 for filler 
65C37518-105. 
Note: The fasteners and hole sizes are shown on drawing 65C37518, sheet 1, zone D2 
(reference 737-100/-200 SRM 51-30-05 or 737-300/-400/-500 SRM 51-40-05).
15. Disassemble all parts that were positioned in steps 11 and 12. Deburr all holes.
16. Apply fay surface sealant (reference BMS 5-95, Type 1, Class B-1/2 or -2) to all the mating 
surfaces of parts disassembled in step 14 (reference 737-100/-200 SRM 51-20-04 or 
737-300/-400/-500 SRM 51-20-05).   
17. Install all previously positioned parts using bolts wet with sealant (reference BMS 5-95, Type 1, 
Class B-1/2 or -2) through the outer skin and install fasteners with sealant (reference BMS 
5-95, Type 1, Class B-1/2 or -2. Refer to 737-100/-200 SRM 51-20-04 or 737-300/-400/-500 SRM 
51-20-05).
Note: The head orientation of the fasteners through the T-chord and skin at the forward end of 
the cross beam is shown on drawing 65C37518, sheet 2, view 1C10-1, zone B7 and sheet

### Page 55

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 55 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
1, view 2A2, zone A11 or at the aft end of the cross beam is shown on sheet 2, view 
1C15-1, zone B9 and sheet 1, view 5A2, zone A14 except the top row of fasteners 
attaching the reinforcing plate to the web and flange of the inboard chord. Install these 
fastener heads from the far side of the inner skin not the near side as shown on drawing. 
Note: If angle 69-76455-1 (aft end) and angle 69-76455-2 (forward end) have been installed by 
service bulletin 737-52-1090 the end hole nearest the edge of the door on the T-chord is 
replaced with a longer fastener as given in drawing 65C37518, sheet 1, zone B8 at the 
forward end of the cross beam and on sheet 1, zone B3 at the aft end of the cross beam.
Note: Install fasteners in the web of the cross beam first to avoid interference with fasteners 
installed common to the flanges of the channels 65C37518-101/103 and the door skin.    
18. Position forward cover 65C37518-111 over the access hole at the forward end of the cross beam 
as given in drawing 65C37518, sheet 1, view 1A2, zone B7 and position aft cover 65C37518-113 
over the access hole at the aft end of the cross beam as given in drawing 65C37518, sheet 1, 
zone B4. Do the following to install. 
Note: It will be necessary to detach the existing strap at each end of the cross beam locally to 
position the forward and aft covers. 
a. Mark out the hole position on each cover in way of existing insulation blanket holes as given 
in drawing 65C37518, sheet 1, zones C3 and C7.
b. Remove covers and drill holes at positions marked in previous step. 
c. Mark off and drill one hole either side of the insulation blanket hole in cover 65C37518-113 
as given in drawing 65C37518, sheet 1, zone C3. 
Note: Maintain a 0.32 inch edge margin and a minimum distance of 0.75 inches from the 
insulation blanket hole center for each hole.
d. Mark off and drill one hole above the insulation blanket hole in cover 65C37518-111 as given 
in drawing 65C37518, sheet 1, zone D8. 
Note: Maintain a 0.32 inch edge margin and a minimum distance of 0.75 inches from the 
insulation blanket hole center. 
e. Mark off and drill remaining hole positions in covers as given in drawing 65C37518, sheets 
10 and 11. Deburr all holes.   
f. Position filler BACF3T01C18-12 under existing strap and drill holes to match holes in strap 
as given in drawing 65C37518, sheet 1, view 1A2, zone C6. Remove filler and deburr. 
g. Position filler BACF3F010D101NN on top of the number 4 cross beam and under existing 
strap. Drill holes to match holes in cross beam and strap as given in drawing 65C37518, 
sheet 1, view 1A2, C7. Remove filler and deburr holes. 
h. Position cover 65C37518-111 over access hole as given in drawing 65C37518, sheet 1, 
view 1A2, C7. Drill holes from cover into inner skin and holes from cross beam into cover. 
Remove cover and deburr holes.

### Page 56

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 56 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
i. Position filler BACF3T01C18-25 under existing strap and drill holes to match holes in strap 
as given in drawing 65C37518, sheet 1, view 1A2, zone C5. Remove filler and deburr.  
j. Position filler BACF3F010D083NN on the top of the number 4 cross beam and under 
existing strap. Drill holes to match holes in cross beam and strap as given in 65C37518, 
sheet 1, view 1A2, zone C4. Remove filler and deburr holes.
k. Position cover 65C37518-113 over access hole as given in drawing 65C37518, sheet 1, 
view 1A2, zone C4. Drilll holes from cover into inner skin and holes from cross beam into 
cover. Remove cover and deburr holes. 
l. Apply fay surface sealant (reference BMS 5-95, Type 1, Class B-1/2 or -2) to the mating 
surfaces of all the covers and fillers. 
m. Install covers and fillers using fasteners with sealant (reference BMS 5-95, Type 1, Class 
B-1/2 or -2. Refer to 737-100/-200 SRM 51-30-02 or 737-300/-400/-500 SRM 51-40-02).
Note: Do not install filler BACF3T01C18-25 at this stage. For installation refer to step 19. 
19. Install cover previously removed for access.                     
a. Position cover and filler BACF3T01B30-09 as given in drawing 65C37518 sheet 1, view 
1A2, zone C5.
b. Drill one 0.229/0.218 inch diameter hole through filler BACF3T01B30-09 as given in drawing 
65C37518, sheet 1, view 1A2, zone C5.
c. Position and trim filler BACF3T01C18-25 to match profile of the access cover.  
Note: Maintain a 0.38 inch minimum edge margin.
d. Remove cover and fillers. Deburr holes and edges. Apply chemical conversion coating to 
the trimmed edges (reference 737-100/-200 SRM 51-10-02 or 737-300/-400/-500 SRM
51-20-01) and finish using two coats of primer (reference BMS 10-11, Type 1. Refer to 
BSOPM 20-41-02).
e. Apply fay surface sealant (reference BMS 5-95, Type 1, Class B-1/2 or -2) to the mating 
surfaces of the cover, fillers and strap. 
f. Assemble cover, fillers and strap and install using fasteners as given in drawing 65C37518, 
sheet 1, view 1A2, zone C5 and (reference 737-100/-200 SRM 51-30-02 or 
737-300/-400/-500 SRM 51-40-02).
20. Install the forward cargo door (reference 737-100/-200 AMM Subject 52-31-0 or 
737-300/-400/-500 AMM Subject 52-31-00).
PART 3 - PREVENTATIVE MODIFICATION (GROUP 1 AIRPLANES - USE TOP KIT 65C37518-1)
1. Remove the forward cargo door (reference 737-100/-200 AMM Subject 52-31-0 and 
737-300/-400/-500 AMM Subject 52-31-00).
2. Get access to the number 4 cross beam web of the forward cargo door. Do as follows:

### Page 57

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 57 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
a. Mark out the access holes as given in drawing 65C37518, sheet 1, view 1A2, zones C4 and 
C7.  
b. Remove the fasteners that attach the skin and strap to the number 4 cross beam locally in 
the area of the new access holes marked out in previous step. Approximately 17 rivets on 
the forward end (starting at the fourth rivet in from the forward end of the door) and 13 rivets 
on the aft end (starting at the fourth rivet in from the aft end of the door).     
WARNING: PULL STRAP AWAY FROM INNER SKIN TO ALLOW ACCESS FOR TRIMMING.
PROTECT CROSS BEAM FROM DAMAGE WHEN TRIMMING THE INNER SKIN.
FAILURE TO PROTECT ADJACENT STRUCTURE COULD RESULT IN COSTLY
REPAIR.
CAUTION: IF 737-52A1100 IS BEING WORKED CONCURRENTLY REMOVE INNER SKIN
FASTENERS AND PARTIALLY REMOVE INNER SKIN TO GAIN ACCESS
INSTEAD OF CUTTING THE ACCESS HOLES. REASSEMBLE THE INNER SKIN
WITH PRODUCTION FASTENERS OR APPROVED SUBSTITUTES. THE
REPLACEMENT FASTENERS ARE NOT INCLUDED IN THE SUPPLIED KIT.     
c. Trim the inner skin to create access holes as given in drawing 65C37518, sheet 1, view 1A2, 
zone C7 and zone C4. 
Note: Maintain a minimum edge margin of 0.38 inches for all fastener holes.
d. Finish trim edges using chemical conversion coating (reference 737-100/-200 SRM 
51-10-02 or 737-300/-400/-500 SRM 51-20-01). Apply two coats of primer (reference BMS 
10-11, Type 1. Refer to BSOPM 20-41-02).
3. Remove fasteners common to the T-chord, web and stop fitting at the forward end of the cross 
beam as given in drawing 65C37518, sheet 3, view 1C2, zone C11and view 3A2-1, zone A3 
(reference 737-100/-200 SRM 51-30-02 or 737-300/-400/-500 SRM 51-40-02).
4. Remove fasteners common to the T-chord, web and stop fitting at the aft end of the cross beam 
as given in drawing 65C37518, view 1C7, zone D13 and view 6A2-1, zone A6 (reference 
737-100/-200 SRM 51-30-02 or 737-300/-400/-500 SRM 51-40-02).
5. Remove the door handle and the access cover as given in drawing 65C37518 sheet 1, view 1A2, 
zone C5. Retain attachment bolts. 
6. Remove the latch torque tube if required to get access at the forward end of the cross beam as 
given in drawing 65C37518, sheet 1, view 2A2, zone B10.        
7. Remove the latch torque tube if required to get access at the aft end of the cross beam as given 
in drawing 65C37518, view 5A2, zone B14.   
8. Position channel 65C37518-101 and fillers 65C37518-105/-107 to the forward end of the cross 
beam as shown in figure 3 and as given in drawing 65C37518, sheet 3, view 1C2, zone D11 and 
view 3A2-1, zone A3. Use shim BACS40R008C103F if required to fill gaps greater than 0.01 
inches between the channel and beam inner chord. Peel shims as necessary to get required 
thickness as given in drawing 65C37518, sheet 3, view 1D10, zone D8 and view 1D11, zone D9. 
Shim thickness should not exceed 0.10 inches. Minimum edge margin is 0.38 inches. Finish 
laminated shims with primer (reference BMS 10-11, Type 1. Refer to BSOPM 20-41-02).

### Page 58

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 58 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
9. Position channel 65C37518-103 and fillers 65C37518-105/-107 to the aft end of the cross beam 
as shown in figure 3 and as given in drawing 65C37518, sheet 3, view 1C7, zone D13 and view 
6A2-1, zone A6. Use shim BACS40R008C103F if required to fill gaps greater than 0.01 inches 
between the channel and beam inner chord. Peel shims as necessary to get required thickness 
as given in drawing 65C37518, sheet 3, view 1D14, zone D15 and view 2D14, zone B15. Shim 
thickness should not exceed 0.10 inches. Minimum edge margin is 0.38 inches. Finish laminated 
shims with primer (reference BMS 10-11, Type 1. Refer to BSOPM 20-41-02).
10. Drill fastener holes at the forward end of the cross beam as given in drawing 65C37518, sheet 3, 
view 1C2, zone D11 and view 3A2-1, zone A3. Refer to drawing 65C37518 sheet 5 for remaining 
hole positions in channel 65C37518-101 and sheet 7 for filler 65C37518-105.   
Note: The fasteners and hole sizes are shown on sheet 3, zone D2 (reference 737-100/-200 
SRM 51-30-05 or 737-300/-400/ -500 SRM 51-40-05). 
11. Drill fastener holes at the aft end of the cross beam as given in drawing 65C37518, sheet 3, view 
1C7, zone D13 and view 6A2-1, zone A6. Refer to drawing 65C37518 sheet 6 for remaining hole 
positions in channel 65C37518-103 and sheet 7 for filler 65C37518-105. 
Note: The fasteners and hole sizes are shown on sheet 3, zone D2 (reference 737-100/-200 
SRM 51-30-05 or 737-300/-400/-500 SRM 51-40-05).
12. Disassemble all parts that were positioned in steps 8 and 9. Deburr all holes.
13. Apply fay surface sealant (reference BMS 5-95, Type 1, Class B-1/2 or -2) to the mating surfaces 
of all parts disassembled in step 11 (reference 737-100/-200 SRM 51-20-04 or 
737-300/-400/-500 SRM 51-20-05).
14. Install all previously positioned parts using bolts wet with sealant (reference BMS 5-95, Type 1, 
Class B-1/2 or -2) through the outer skin and install fasteners with sealant (reference BMS
5-95, Type 1, Class B-1/2 or -2. Refer to 737-100/-200 SRM 51-20-04 or 737-300/-400/-500 SRM 
51-20-05).
Note: The head orientation of fasteners through the T-chord and skin at the forward end of the 
cross beam is shown on drawing 65C37518, sheet 3, views 1C2, zone C11 and 
3A2-1, zone A3 or at the aft end of the cross beam as shown on sheet 3, view 1C7, zone 
C13 and view 6A2-1, zone A6 except the top row of fasteners attaching the reinforcing 
plate to the web and flange of the inboard chord. Install these fastener heads from the far 
side of the inner skin not the near side as shown on drawing.      
Note: If angle 69-76455-1 (aft end) and angle 69-76455-2 (forward end) have been installed by 
service bulletin 737-52-1090 the end hole nearest the edge of the door on the T-chord is 
replaced with a longer fastener as given in drawing 65C37518, sheet 1, zone B8 at the 
forward end of the cross beam and on sheet 1, zone B3 at the aft end of the cross beam.
Note: Install fasteners in the web of the cross beam first to avoid interference with fasteners 
installed common to the flanges of the channels 65C37518-101/103 and the door skin.
15. Position forward cover 65C37518-111 over the access hole at the forward end of the cross beam 
as given in drawing 65C37518, sheet 1, view 1A2, zone B7 and position aft cover 65C37518-113 
over the access hole at the aft end of the cross beam as given in drawing 65C37518, sheet 1, 
zone B4. Do the following to install.

### Page 59

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 59 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
Note: It will be necessary to detach the existing strap at each end of the cross beam locally to 
position the forward and aft covers. 
a. Mark out the hole position on each cover in way of existing insulation blanket holes as given 
in drawing 65C37518, sheet 1, zones C3 and C7.
b. Remove covers and drill holes at positions marked in previous step. 
c. Mark off and drill one hole either side of the insulation blanket hole in cover 65C37518-113 
as given in drawing 65C37518, sheet 1, zone C3. 
Note: Maintain a 0.32 inch edge margin and a minimum distance of 0.75 inches from the 
insulation blanket hole center for each hole.
d. Mark off and drill one hole above the insulation blanket hole in cover 65C37518-111 as given 
in drawing 65C37518, sheet 1, zone D8. 
Note: Maintain a 0.32 inch edge margin and a minimum distance of 0.75 inches from the 
insulation blanket hole center. 
e. Mark off and drill remaining hole positions in covers as given in drawing 65C37518, sheets 
10 and 11. Deburr all holes.   
f. Position filler BACF3T01C18-12 under existing strap and drill holes to match holes in strap 
as given in drawing 65C37518, sheet 1, view 1A2, zone C6. Remove filler and deburr. 
g. Position filler BACF3F010D101NN on top of the number 4 cross beam and under existing 
strap. Drill holes to match holes in cross beam and strap as given in drawing 65C37518, 
sheet 1, view 1A2, C7. Remove filler and deburr holes. 
h. Position cover 65C37518-111 over access hole as given in drawing 65C37518, sheet 1, 
view 1A2, C7. Drill holes from cover into inner skin and holes from cross beam into cover. 
Remove cover and deburr holes. 
i. Position filler BACF3T01C18-25 under existing strap and drill holes to match holes in strap 
as given in drawing 65C37518, sheet 1, view 1A2, zone C5. Remove filler and deburr.  
j. Position filler BACF3F010D083NN on the top of the number 4 cross beam and under 
existing strap. Drill holes to match holes in cross beam and strap as given in 65C37518, 
sheet 1, view 1A2, zone C4. Remove filler and deburr holes.
k. Position cover 65C37518-113 over access hole as given in drawing 76C37518, sheet 1, 
view 1A2, zone C4. Drilll holes from cover into inner skin and holes from cross beam into 
cover. Remove cover and deburr holes. 
l. Apply fay surface sealant (reference BMS 5-95, Type 1, Class B-1/2 or -2) to the mating 
surfaces of all the covers and fillers. 
m. Install covers and fillers using fasteners with sealant (reference BMS 5-95, Type 1, Class 
B-1/2 or -2. Refer to 737-100/-200 SRM 51-30-02 or 737-300/-400/-500 SRM 51-40-02).
Note: Do not install filler BACF3T01C18-25 at this stage. Refer to step 16.

### Page 60

December 11, 2003
737-52-1149
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 60 of 80
BOEING SERVICE BULLETIN 737-52-1149
 
 
16. Install cover previously removed for access.                   
a. Position cover and fillers BACF3T01B30-09 and BACF3T01C18-25 as given in drawing 
65C37518, sheet 1, view 1A2, zone C5.
b. Drill one 0.229/0.218 inch diameter hole through filler BACF3T01B30-09 as given in drawing 
65C37518, sheet 1, view 1A2, zone C5.
c. Position and trim filler BACF3T01C18-25 to match profile of the access cover. 
Note: Maintain a 0.38 inch minimum edge margin.
d. Remove cover and fillers. Deburr holes and edges. Apply chemical conversion coating to 
trimmed edges (reference 737-100/-200 SRM 51-10-02 and 737-300/-400/-500 SRM 
51-20-01) and finish using two coats of primer (reference BMS 10-11, Type 1. Refer to 
BSOPM 20-41-02).
e. Apply fay surface sealant (reference BMS 5-95, Type 1, Class B-1/2 or -2) to the mating 
surfaces of the cover, fillers and strap. 
f. Assemble cover, fillers and strap. Install using fasteners as given in drawing 65C37518, 
sheet 1, view 1A2, zone C5. (Refer to 737-100/-200 SRM 51-30-02 or 737-300/-400/-500 
SRM 51-40-02).
17. Install the forward cargo door (reference 737-100/-200 AMM Subject 52-31-0 or 
737-300/-400/-500 AMM Subject 52-31-00).
PART 4 - INSPECTION (GROUP 2 AIRPLANES) 
1. Close or remove the forward cargo door (reference 737-100/-200 AMM Subject 52-31-0 and 
737-300/-400/-500 AMM Subject 52-31-00).
2. Get access through the inner skin lightening holes of the door. Do a visual detailed or High 
Frequency Eddy Current (HFEC) Inspection for cracks on the number 4 cross beam web, 
outboard chord and T-chord radius as shown in Figure 1.            
3. If cracks are found on the number 4 cross beam, repair the cross beam reference Part 5 - Repair.     
4. If no cracks are found, continue to do repeat detailed visual and HFEC inspections at the intervals 
shown in paragraph 1E - Compliance. As an option to repeat inspections, do the preventative 
modification as given in step 5. 
5. Before the installation of the preventative modification, do as follows:       
a. Remove fasteners and do an HFEC inspection as given in NDT Manual Part 6, 51-00-00 
Figures 1, 11 and 16 of the fastener holes.  
b. Do a HFEC surface inspection of the T-chord root radius at the forward and aft ends of the 
cross beam as given in 737 NDT Manual Part 6, 51-00-00 Figures 4 or 23 and as shown on 
drawing 65C37518, sheet 2, view 1B5, zone A3 and in Figure 1.
Note: Do this inspection only if it hasn’t been done in Part 4 - paragraph 2.

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-52-1149/file/408b52b09ea5.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
