# Boeing Service Bulletin 737-53-1116: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2014-0057; AD 2014-25-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 737-53-1116](https://openairdocs.org/service-documents/boeing/sb-737-53-1116.md)
- Title as filed: SB 737-53-1116, Rev. 1
- Pages: 26
- PDF: https://openairdocs.org/files/sha256/7b/79/7b79fdbe82fd9b0d8f89158f184629591eab182d52aa7888385abdfb3751c9fa
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1116/file/7b79fdbe82fd

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

BOEING
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
BOEING COMMERCIAL AIRPLANES POST OFFICE BOX 3707 SEATTLE, WASHINGTON 98124-2207
Boeing Service Bulletin 737-53-1116
This sheet transmits REVISION 1, date September 7, 1989
of Service Bulletin 737-53-1116, "FUSELAGE - FORWARD GALLEY DOORWAY UPPER
CORNERS - INSPECTION, REPAIR, AND PREVENTIVE MODIFICATION".
NOTE: This revision constitutes a complete reissue.
SUMMARY
This revision is issued to recormend the modification per this service
bulletin for incorporation on aging 737 airplanes and to change the
forward galley door upper forward corner doubler installation, eliminating
interference when incorporating Service Bulletin 737-53-1074.
incorporation threshold for this service bulletin is shown in the
Description and Accomplishment Instructions.
As a result of the FAA-sponsored Aging Fleet Conference, a 737 Structures
Working Group with Airline and Boeing members and FAA observers was formed
to review structural service bulletin modifications and recommend selected
bulletins for incorporation on aging airplanes. Based on a structural
review of the 737 airplane, the Structures Working Group has determined
that modification per this service bulletin, at or before the indicated
threshold, should be accomplished to support the continued structural
integrity of aging 737 airplanes.
Airplane effectivity is updated to reflect current airplane ownership.
Airplanes modified per the previous release of this service bulletin do
not require additional work.
A revision bar in the left margin along with this revision number and date
indicates a change.  Absence of a revision bar on a page bearing this
revision number and date means only that existing copy has been moved or
that a minor typographical error has been corrected.
REVISION HISTORY
Original Issue:  July 21, 1988
Revision 1:  September 7, 1989

### Page 2 (OCR)

BOEING
SERVICE BULLETIN
SUMMARY
BOEING COMMERCIAL AIRPLANES  POST OFFICE BOX 3707 SEATTLE, WASHINGTON 99124-2207
SUBJECT: FUSELAGE - FORWARD GALLEY  ATA: 5331  NUMBER: 737-53-1116
DOORWAY UPPER CORNERS -  DATE: July 21, 1988
INSPECTION, REPAIR, AND  REVISION 1: September 7, 1989
PREVENTIVE MODIFICATION
BACKGROUND
Based on a structural review of the
737 airplane, incorporation of the
modification per this service bulletin
is recommended on aging airplanes.
Six operators have found seventeen
cracks in the skin and doublers at the
upper corners of the forward galley
doorway on eight airplanes.  There
were eight cracks reported at the
upper aft corner on three airplanes,
and nine cracks in the skin at the
forward corner on five airplanes.
airplanes had accumulated from 29,000
to  47,300 flight hours,
40,500 to 60,800 flight cycles.
35,000 flight cycles, accomplish the
Initial inspection within 3,500 flight
cycles after receiving this bulletin.
If no cracks are found accomplish the
preventive modification, or repeat the
inspection at "C" check intervals
until the preventive modification is
accomplished.  If cracks are iound,
install the  repair doublers and
triplers  over the cracked areas per
this bulletin.
EFFECTZVITY
737 airplanes Line Number 1-1560, less
PJ201 - PJ219
MANPOWER
Cause of the cracking is attributed to  Elapsed
fatigue from pressurization cycles,  Total  Time
and if not corrected could result in  Applicability  Man-Hours  (Hours)
cabin pressurization difficulties, and
unscheduled downtime for repairs.  Inspection  5  2.5
Preventive
ACTION  Modification  0.7  0.7
Repair -per corner  14  24
| As recommended by the 737 Aging Fleet
Structures Working Group, accomplish  MATERIAL INFORMATION
modification  the
Accomplishment  Instructions  at  Or  Kit  Price
before the accumulation of  75,000
flight cycles.  65C33800-12  $422.00
65C33800-13  $401.00
Prior to reaching  35,000  flight  65C33800-14  $292.00
cycles, accomplish high  65C33800-15  $301.00
frequency eddy current inspections for  165C33800-16  $214.00
cracks in the skin, skin doubler, or
bearstrap doubler in the upper corners  See Paragraph I.F for applicable terms
of the forward galley doorway.  for  and conditions.
airplanes having accumulated  over
Sunmary Page 1 of 2

### Page 3 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
SCRACKS
(TYPICAL)
AFT CORNER SHOWN
FORWARD CORNER SIMILAR
Jul 21/88  REV. 1: Sep 7/89  Summary Page 2 of 2

### Page 4 (OCR)

BOEING COMMERCIAL AIRPLANES  BOEING  POST OFFICE BOX 3707  SEATTLE, WASHINGTON 90124-2207
SERVICE BULLETIN
78Z
ATA SYSTEM: 5331  NUMBER: 737-53-1116  DATE: July 21, 1988
REVISION 1: September 7, 1989
SUBJECT: FUSELAGE - FORWARD GALLEY DOORWAY UPPER CORNERS - INSPECTION,
REPAIR, AND PREVENTIVE MODIFICATION
I.  PLANNING INFORMATION
A.  Effectivity
1.  Airplanes Affected
See Service Bulletin Index Part 3 for cross reference of
Variable Number to Airplane Serial Number.
This change is applicable only to airplanes listed below.
CODE VARIABLE NUMBER
AAL  PG201  PG204  PG217  PG222
PG271-PG272 PG276  PG278  PG351
PG403  PG438  PP161-PP168
ABD  PK495
ABL  PP380
AFA  PL502-PL503 PN101-2N117
AID  PY002
ALG  PK361  PK631  PK633-PK634 PL717-PL725
PY051-PY053
ALK  PY591-PY595
ALO  PG046  PG629  PG705  PK286
PK305-PK306 PK691-PK695 PK697  PP730
PP733  PY001  PY003  PY005
PY451
737-53-1116
Jul 21/88
REV. 1:  Sep 7/89  Page 1 of 22

### Page 5 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINIJED)
ALY  PY409-PY410
AMW  PC004  PG036
PJ 102
PК625-PК626 PК696  ZLITa
PL551-PL562 PL801  SEdd 26dd-8dd
PP381  06 668-68
ANA  PG578-PG581 PG583-PG586 PK711-PK716
ANG  PK661  РК664-PК666 PY162
ANK  PG582
ANS  PQ026-PQ037
ANK  PP904  PP907
ANZ  PK047  PK211
PM181  PY741
АРС  PL151
ARE  PP352  PP384
PP946-PP947
ARG  PH705-PH708 PH741-PH743 PК102-PК103 PY007-PY008
ARL  PG251  PG253-PG255 PG573
PK029  PK614  PK641-PK642 PP951-PP952
PY281  PY321-PY323
ARM  PY241  PY243-PY244
ASA  PY112  PY134-PY135 PY270
ASC  PG224  PG401-PG402 PG572  PGS74
РУЗ43
AUK  PK612  PL171
AUS  PQ001-PQ012
AVG  PN501-PN502
AZE  PA001  PA003-PA004 FC003  PL802
Jul 21/88  737-33-11
REV. 1: Sep 7/89

### Page 6 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINUED)
BAH  PK351 - PK353 PL061
BAB  РК731• PK765 PK771-PK777 PK779  PK819
PK830
BAV  P1451-PL452 PL455-P1456
BCI  PG214
BEJ  PM281-PM283 PP521-PP522
BER  PP822
BMA  PP908 - PP909
BNF  PG034  PG202  PG205  PG207
PG209  PG211-PG212 PG216  PG218
PG220-PG221 PG273-PG275 PK287
BRI  PJ 101  PJ103-PJ108 PJ110-PJ119 PK212
PK215  РК801-РК804 РУ361-РУ362
BRT  PJ001-PJ009 PJ031  PJ072  PK882
PL303  PN451 - PN456
BRZ  PK068 - PK069
BZB  PY401
CAL  PG199  PP671-PP699 PP701-PP726
CAM  PM171  PY046 - PY047
CDI  PG651-PG652 PJ032  РК026-PК028 PK221-PК223
PK358  PK561  PК671-PК675 PК677-PК681
PK822-PK823 PK881  PK884  P1401-PL417
PL712  PL761-PL762 PL764-PL770 PM141-PM142
РУ151-РУ154 РУ301-РУ304 РУ421-РY422 РY441
CHI  PN471 - PN472
CIN  PG279
COP  PC001  РУ341
COR  PP831  PP838
CRU  PK141-PK146
Jul 21/88  737-53-1115
REV. 1: Sep 7/89

### Page 7 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINUED)
DAL  PG203  PG219  PK611  PK613
PK615  PK623-PK624 PK632  PL221
PL611  PN131-PN163 PN401-PN404 PN407-PN420
PP231-PP243
DAN  PK820  PL421  PNO01-PNO02 PP351
PP353
DFI  PP991
DLH  PК901-PК938 PQ051-PQ065 PQ086-PQ090 PY345-PY346
DRG  PK35?  PK617  PK871  PK873
EAG  PG436  PY381
EGN  PG037  PG208  PG215
PG431  PL763
EGP  PK252 - PK258
ELA  PL631-PL632
ERA  PG026  PG028 - PG029 PY004  900xa
EUR  PK203  PK359  PK564
FAT  PA002  PA005
PG228  PG230
FCT  PC002  PG213  PG252
FRO  PGU32-PC433 P6041-PG442 PG621-PC628 P6630
PG704  PLO01
GAX  PA231-PA232
GBN  PY191
GER  PQ231 - PQ233
GNE  PY651
GUL  PK461-PK468
GUN  PK635-PK637 PM251-PM254 PN405  PY056-PY057
HAP  PL501  PL504 - PL506
Jul 21/88  737-53-1116
REV. 1:  Sep 7/89

### Page 8 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINUED)
HGA  PK284-PK285 PK827
HLA  PP833-PP834 PP839-FP840 PP903
ICS  PY342  РYЗ44
IDF  PM016-PH017
IDO  PL601-PL603
IER  PP841-PP842
IND  PH021-PH022  PH024  PH709  PH711-PH713
PK231-PK240 PL026-PLO28 PL711  PM001 - PM006
PY631
INT  PK616  PP931-PP936 PP948
IRN  PH731  PK391  PY021-PY022
IRQ  PY141 - PY142
JAT  PP771-PP779
JTA  PL441
KAF  PP221
KIN  PP861-PP870
LAL  PP851-PP852
LAM  PH001  PH703  PY031
LAN  PК360  PK825  PLO25  PY242
INA  PY411
INK  PH701
LUX  PK451-PK452
MAD  PG375  PL793
MAL  PL716
MAS  PK281  PL736-PL738 PL740-PL747 PY201
Jul 21/88  737-53-1116
REV. 1: Sep 7/69

### Page 9 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINUED)
MID  PK621-PK622 PK627-PK629 PN491-PN493
MLT  PL621-PL626
MON  PP821  PP823-PP824 PP832
MRS  PK872  PK874  PP501-PP504
MXG  PC005  PG223
NAS  PA099
NAU  PK356  PK581  PY286
NIA  PL781-PL782 PL784-PL788
NIR  PY166
NIA  PY132-PY133
OLY  PK301-PK304 PK307-PK310 PM021-PM023
ORN  PK826  PP201-PP205 PP732
PAA  PG020 - PG021 PG043  PG047 - PG048
PEX  PA006-FA022 PG501 - PG505
PIA  PP281 - PP286
PLU  PL201-PL203
PRS  PX701
PRE  PJ109  PK563
PTI  PP728 - PP729
PTS  PL471
RAM  PК271-PК274 PY671-РY672
RBA  PK051  PY231
SAA  PG353-PG356 PL101-PL113
SAB  PK041  PK044-PK046 PK048-PK050 PK052-PK053
PК431-PК433 PP961-PP965 PY272-PY275
Jul 21/88  737-53-1116
REV. 1:  Sep 7/89

### Page 10 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINUED)
SAH  PG434  PK081
SHJ  PL581
SRF  PK318
SUD  PY156-PY157
SVA  PK311-PК317 PL726-PL735 PY036-PY037
SWA  PK091-PK099 PK541-PK560 PK630  PM051-PM066
PP101-PP135
SWL  PK521  PK523 -PK527
TAC  PG059  PG352  PP727  PY131
TAF  PK519
TAN  PJ071
TAP  PK971  PK973-PK974 PNO81-PN086 PY721
TAV  PG074  PK501 - PK504 PK821  PP801-PP804
PY101-PY103
TBL  PP825-PP826 PP836-PP837 PP847-PP848 PQ241-PQ242
TEA  PК042-PК043 PK282
TII  PK511  PK514- PK515
INZ  PY611-PY612
TUN  PК861-PК863 PY621
VAL  PG001-PG004 PG006-PG019 PG022-PG025 PG027
PG032-PG033 PG038-PG040 PG044-PG045
PG051-PG054 PG057  PG060-PG063 PG065-PG072
PK201-PK202 PL002-FL024 PQ101-PQ123
UNV  PP379  PP382  PP731
USA  PG041-PC042 PG049
PG301-PG314 PG474  PK288 -PK289
PK591-PK599 PK601-PK610 PK883  PM101 - PM119
PNO21-PN043 PP001-PP045 PP376-PP377 PP383
PP401-PP436 PP471-PP475 PV001-PV004
Jul 21/88  737-53-1116  7
REV. 1:  Sep 7/89

### Page 11 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
CODE  VARIABLE NUMBER (CONTINUED)
UTA  PP902  PP910
VAR  PK111-PK120 PL453-P1454 PP905-PP906 PP981-PP982
VAT  PK824  PL758
VIV  PP169  PP391-PP392
VNZ  PKO 70
VSP  PG435  PG437  PG439-PG440 PG471-PG473
PH011-PHC13 PК061-PК062 PK065-PК067 PК241
PK354-PK355 PL756  PP301-PP305 PP827
PX071  PY222
XIA  PM255  PN406
XIN  PP631 - PP634
YEM  PK341
YUN  PP651-PP652
ZAI  PY111  PY113
ZAM  PK291
ZMB  PN431 - PN433
Jul 21/88  737-53-1116
REV. 1: Sep 7/89  8

### Page 12 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
LISTING BY VARIABLE NUMBER
PA001-PA022 PA099  PA231-PA232 PC001-PC005 PG001-PG075
PG199  PG201-PG230 PG251-PG255 PG271-PG279 PG301-PG314
PG331-PG332 PG351-PG356 PG375  PG401-PG403 PG431-PG442
PG471-PG475 PG501-PG505 PG571-PG586 PG621-PG630 PÇ651-PG652
PG701- PG705 PH001  PH011-PH013 PH021-PH024 PH701-PH715
PH731-PH732 PH741-PH743 PJ001-PJ009 PJ031-FJ032  • PJ071- PJ072
PJ101-PJ119 PК026-PК029 PК041-PК053 PК061-PК070 PК081-PК082
PК091-PК099 PК101-PК103  PК111-PК120 PК141-PК146 PК201-PК204
PК211-PК223 PК231-PК241 PК251-PК258 PК271-PК274 PК281-PК289
PK291  PK301 - PK318  PК341  РК351 -К361 РК391
PК431-PК433 PK451-PK452  PK461-PK469 PK495  PK501- PK504
PK511-PK515 PK519  PK521-PK527 PK541-PK565 PK581
PK591-PК599 PК601-PК617  PК621-PК637 PК641-PК642 PК661-PК666
PК671-PК681 PК691-PK697 PК711-PК716 PК731-PК765 PК771-PК779
PK801-PК804 PK819-PK827  PK830  PK861-PК863 PK871-PK874
PK881-PK884 PK901-PK938  PK971-PK974  PL001-PL028 PL061
PL081  PL101 - PL113  PL151  PL171-PL172 PL201-PL203
PL221  PL401- P1417  PL421  PL441  PL451-PL456
PL491  PL501-PL506 PL551-PL562  PL581
PL601-PL603 PL611  PL621-PL626 PL631-PL632  PL711-PL712
PL716-PL747 PL756  PL761-PL770  PL781-PL788
PL801-PL803  PM001-PM006 PM016-PM017  PM021 - PM023
PM051-PM066 PM101-PM119  PM141-PM142 PM171  PM181
PM251-PM255 PM281-PM283 PN001-PN002 PN021-PN043 PN081-PN086
PN101-PN117 PN131-PN163 PN401-PN420 PN431-PN433 PN451-PN456
PN471-PN472 PN481  PN491-PN493  PN501-PN502 PN511
PP001-PP045 PP101-PP135 PP161-PP169  PP181-PP192  PP201-PP205
PP221  PP231-PP243 PP281-PP286 PP301-PP305  PP351-PP353
PP376-PP384 PP391-PP392 PP401-PP436  PP471-PP475  PP501 - PP504
PP521-PP522 PP631-PP634 PP651-PP652  PP671 - PP699  PP701-PP733
PP771-PP779  PP801-PP804 PP821-PP827  PP831-PP842  PP846-PF848
PP851-PP852 PP861-PP870 PP891-PP899  PP901-PP910  PP931-PP936
PP946-PP948 PP951-PP952 PP961-PP965  PP981-PP982 PP991
PQ001-PQ012 PQ026-PQ037 PQ051-PQ065  PQ086-PQ090 PQ101-PQ123
PQ231-PQ233  PQ241-PQ242 PVO01-PV004  PX071  PX701
РY001-РY008 PY021-PY022 РY031  PY036-PY037 PY046-PY048
PY051-РУ053 РY056-PY057 РУ101-РУ103 РУ111-PY113 PY131-РУ135
PУ141-РУ143 PY151-РУ154 РУ156-PУ157 PY161-РУ162 РУ166
PY191  PY201  PY221-PY222 PY231  PY241-PY244
PY270-PY275 PY281  PY286  РУЗ01-РУ304 РУ321-РУ323
РУ341-РУ346 РУ361-РУ362 РУ381  PY401  PY409 -PY411
РY421-РУ422 PY441  PY451  РУ461-РУ463  PY591-PY595
PY611-PY612 PY621  PY631  PY651  PY671-PY672
PY721  PY741
2.  Spares Affected
None
737-53-1116
Jul 21/88
9
REV. 1: Sep 7/89

### Page 13 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
B.  Reason
As a result of the FAA-sponsored Aging Fleet Conference, a 737
Structures Working Group with Airline and Boeing members and FAA
observers was formed to review structural service bulletin
modifications and recommend selected bulletins for incorporation on
aging airplanes.  This service bulletin modification has been
recommended for incorporation on aging 737 airplanes.
Inspection of the upper corners of the forward galley doorway will
detect cracking that could result in pressurization difficulties.
Repair of cracks or accomplishment of preventive modification on
uncracked structure is terminating action for inspection per this
service bulletin.
Six operators have reported cracks in the upper corners of the  0210225
forward galley doorways on a total of eight airplanes. Three
airplanes had a total of eight cracks in the upper aft corner, with
crack lengths of up to 2 inches in the skin, and a 2 inch long
crack in the bearstrap doubler on one airplane. Five airplanes had
a total of nine cracks from 0.1 inch to 1.5 inches in length in the
upper forward corner skin.
The  airplanes had accumulated from 29,000 to 47,300 flight hours,
and from 40,500 to 60,800 flight cycles.
Revision  of  this bulletin is issued to provide the
recommendations of the Aging Fleet 737 Structures Working Group and
to change the forward galley doorway upper forward corner repair
doubler installation.  The installation change eliminates one
fastener and moves one fastener to make the repair compatible with
the Service Bulletin 737-53-1074 modification.
The forward galley door upper forward corner modification,
modification installed per Service Bulletin 737-53-1074, therefore,  installed per this service bulletin, overlaps the preventive  congested the pr: Se
it is suggested that prior or concurrent incorporation of the
preventive modification per service bulletin 737-53-1074 be
considered prior to the repair per this bulletin. Airplanes
repaired per the original issue of this bulletin do not require
additional work per this revision.
737-53-1116
Ju1 21/88  REV. 1: Sep 7/89  10

### Page 14 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
c.  Description
Based on a structural review of the 737 airplane, it is recommended
that the modification per the Accomplishment Instructions of this
service bulletin be accomplished prior to, or upon accunulation of
75,000 flight cycles.
Prior to accumulating 35,000 flight cycles, accomplish high and low
frequency eddy current inspections of the area around fasteners in
the upper corners of the forward galley doorway to determine if
there are cracks in the skin, skin doubler, or bearstrap doubler.
For airplanes with over 35,000 flight cycles, accomplish this
inspection no later than 3,500 flight cycles after receipt of this
If no cracks are found, accomplish the preventive modification per
this bulletin, or repeat the inspection at "C" check intervals
until the preventive modification is accomplished.
If cracks are found, stop drill the crack ends, and install the
repair doublers and triplers over the cracked areas per this
bulletin.
NOTES: 1. Prior or concurrent incorporation of Boeing Service
Bulletin 737-53-1074, "Fuselage - Entry and Galley
Doorway Skin Cutouts - Inspection and Modification", is
suggested on commonly affected airplanes.
This service bulletin is listed in Boeing Document
D6-38505.
D.  Approval
This service bulletin has been reviewed by the Federal Aviation
Administration (FAA) and the repairs and modifications herein
comply with the applicable Federal Aviation Regulations (FAR's) and
are FAA approved.
The FAA has determined that modification in accordance with
Revision 1 of Service Bulletin 737-53-1116, "Fuselage - Forward
Galley Doorway Upper Corners - Inspection, Repair, and Preventive
Modification" provides an acceptable alternate means of compliance
for modifications specified in Boeing Document D6-38505, which is
the subject of Notice of Proposed Rule Making (NPRM) Docket Number
89-NM-67-AD.
737-53-1116
Jul 21/88
11
REV. 1: Sep 7/89

### Page 15 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
E.  Manpower
Approximately 7 man-hours and a crew of 2 are required to
accomplish this inspection per airplane, plus approximately an
additional 0.7 man-hour and a crew of 1 1s required to accomplish
this preventive modification per doorway corner.
Approximately 14 man-hours are required to accomplish this crack
repair per doorway corner.
The following breakdown of manpower requirements is suggested as a
guide to assist operators in planning and accomplishing this
repair.  This estimate is for direct labor performed by an
experienced crew.  familiarization, cure tine, tool acquisition, or lost time. Factor  It does not include setup,  planning.
this estimate as necessary based on your own experience.
Elapsed
Time
Operation  Crew Size  Man-Hours  (Hours)
1  1  1
Access
Crack Repair (maximum)  12  12
Restoration  1  1  1
TOTAL PER DOORWAY CORNER  14  14
737-53-1116
Jul 21/88  12
REV. 1: Sep 7/89

### Page 16 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
F.  Material - Price and Availability
The kits identified in Paragraphs II.A and II.B may be obtained
from Boeing within the terms and conditions defined below.
quotation is computed from date of receipt of operator's purchase
Improved flow times may be possible if necessary to
support operator's planned modification  schedule.  Therefore,
operators are requested to include planned dates of incorporation
on their purchase orders.
Kit Number  Description  Delivery  Unit Price
65C33800-12  Kit - Repair  $422.00
65C33800-13  Kit - Repair
65C33800-14  Kit - Repair  22 weeks  $292.00
65C33800-15  Kit - Repair  $301.00
65C33800-16  Kit - Gutter  22 weeks  $214.00
Date Septembex 7, 1989
The prices quoted are subject to the terms and conditions of
Boeing's standard purchase order acknowledgment.  Quotations are
subject to acceptance within 120 days from date hereon. After
expiration of the quotation, price and delivery data will be
provided upon request.  Prices quoted in United States Dollars.
Terms: Net 30 days.
Address purchase orders and correspondence pertaining to this
quotation to Director of Spares, and refer to this service bulletin
number.
The following kit identified in Paragraph II.A.1 may be furnished
or fabricated from operator's exísting stock or purchased directly
from industry sources. The following Boeing price data is provided
for planning purposes or in the event operators desire to purchase
kits from Boeing. Delivery data will be provided upon request.
Kit Number  Description  Unit Price
65C33801-1  Kit - Preventive  $0.60
Modification
Date September Z, 1989
The prices quoted are subject to the terms and conditions of
Boeing's standard purchase order acknowledgment. Quotations are
subject to acceptance within 120 days from date hereon. After
expiration of the quotation, prices and delivery data will be
provided upon request.  Prices quoted in United States Dollars.
Terms: Net 30 days.
Address purchase orders and correspondence pertaining to this
quotation to Director of Spares, and refer to this service bulletin
Jul 21/88  737-53-1116
REV. 1: Sep 7/89  13

### Page 17 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
G.  Tooling - Price and Availability
All required coldwork tools and sleeves for accomplishment of this
service bulletin may be selected from appropriate tables in
Structural Repair Manual and procured from industry sources, as
Two sources that provide coldwork tools, as well as engineering and
service, is Fatigue Technology, Inc.. and West Coast Industries,
Inc. Also available from both companies is a kit of coldwork
tooling specifically tailored to the requirements of this service
bulletin.
Ref: FTI Kit Number: FTI-737-53-1116-1
Fatigue Technology, Inc.
P.O. Box C-88388
Seattle, WA 98188
Telex Number 321004
Twx 910-444-4128
WCI Kit Number WCI-737-53-1116
West Coast Industries, Inc.
1111 North 92nd
Seattle, WA 98103
Telex Number 284560
WCTS UR
H.  Weight and Balance
Change in  Change in
Weight  Moment
Applicability  (Pounds)  (Pound-Inches)
737-100  (a)  +9.2  +2825
737-200  (a)  +9.2  +3494
737-300  (a)  +9.2  +2089
(a) Approximate  weight  and balance information based on
incorporation of 65C33800-12, -15 and -16 kits (worst case) on
an airplane.  Actual weight and balance to be determined by
operator based on extent of kit incorporation.
NOTE: Incorporation of Preventive Modification kit 65C33801-1
has no effect on airplane weight and balance.
Jul 21/88  737-53-1116
REV. 1: Sep 7/89  14

### Page 18 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
I.  References
1.  Existing Data:
a -  737 Structural Repair Manual Subjects 51-10-1, 51-30-9
b.  737 Nondestructive Test Hanual Part 6 Subject 51-00-00,
53-10-42
c.  Boeing Service bulletin 737-53-1074, "Fuselage - Entry
and Galley  Doorway Skin Cutouts  - Inspection and
Modification"
d.  Boeing Document D6-38505, "Aging Airplane Service
Bulletin Structural Modification Program - Model 737-
100/-200/-200c*.
2.  Data supplied in support of this service bulletin:
Drawings
Drawing No.  Sheet  DCN  ADCN Title
65033800  PL  Skin and Stringer
Installation - Repair
(Top Kit)
65C33800  1  C(a)
(a) Supplied in support of Revision 1.
3.  Process Data:
Boeing Process Specifications that are listed on drawings
supplied in support of this service bulletin are not detailed
in this service bulletin since they are common practices
which can be accomplished in accordance with operator's
normal procedures.
J.  Publications Affected
None
Jul 21/88  737-53-1116
REV. 1:  Sep 7/89  15

### Page 19 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
ı1.  MATERIAL INFORMATION
A.  Parts Required Per Airplane
The following is provided to aid in kit selection.
Usage  KLE
Preventive Modification  65C33801-1
Both Corners
Repair Forward Corner
Skin and bearstrap cracks  65C33800-12
Skin or bearstrap crack  65C33800-14
Repair - Aft Corner
Skin and bearstrap cracks  65C33800-13
Skin or bearstrap crack  65C33800-15
Rain Gutter Replacement  65C33800-16
(Required with repair)
1.  The kits may be obtained as noted in Paragraph I.F.
NOTE: One  or  more kits  and operator furnished materials
listed in Paragraph II.A.2 are required to modify or
repair each airplane.
65C33800 - SKIN AND STRINGER INSTALLATION - SKIN REPAIR (TOP KIT)
- 16  - 15  - 14  - 13 - 12
Quantity  Part Number  NomencLature
65C33800-12  Kit - Forward Corner,
Skin and Doubler Repair
65C33800-13  Kit - Aft Corner, Skin and
Doubler Repair
65C33800-14  Kit - Forward Corner, Skin
or Doubler Repair
65C33800-15  Kit - Aft Corner, Skin or
Doubler Repaix
65C33800-16  (a)  Kit - Gutter Installation
1  65C33800-17  Repair Strap
1  65C33800-18  Doubler
1  65C33800-19  Tripler
65C33800-20  Repair Strap
1  65C33800-21  Doubler
65C33800-22  Tripler
65C33800-23  Filler
65C33800-24  Filler
(a) Kit contains excess parts not required for installation.  Discard
excess parts or return them to operator's spare stock.
Jul 21/88  737-53-1116
REV. 1: Sep 7/89  16

### Page 20 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
65C33800 - (CONTINUED)
- 16  -15-14  - 13 - 12
Quantity  Part Number  Nomenclature
65C33800-25  Filler
65C33800-26  Filler
1  65-49893-2  Gutter
20  2  BACB30FNS - 5  H1-Lok
18  BACB30FN5 - 6  Hi-Lok
21  9  21  9  BACB30FN6 - 3  Hi-Lok
31  12  22  12  BACB30FN6 -4  HI-Lok
7  62  64  28  23  BACB30FN6 - 5  Hi-Lok
7  34  42  43  55  BACB30FN6 - 6  Hi- Lok
4  33  11  32  31  BACB30FN6 - 7  Hi-Lok
2  24  6  BACB30FN6 - 8  H1-Lok
1  1  BACB30FN6 - 9  Hi - Lok
20  20  BACC3OM5  Collar
11  185  142  178 142  BACC30M6  Collar
5  BACR15BB4B7  Rivet
5  BACR15BB4B9  Rivet
4  4  BACR15CE6B11  Rivet
BACR15CE6B12  Rivet
3  4  BACR15CE6B13  Rivet
3  4  BACR15CE6B14  Rivet
BACR15CE6D6  Rivet
BACR15CE6D8  Rivet
3  BACR15CE6D9  Rivet
1  1  BACR15CE6D11  Rivet
4  4  1  1  BACR15CE6D12  Rivet
3  3  BACR15CE6D13  Rivet
65C33801  SKIN, AND STRINGER INSTALLATION, SECTION 41,
PREVENTIVE MODIFICATION
Quantity  Part Number  Nomenclature
65C33801-1  (a)  Top Kit
BACR1SBB8B9  Rivet
BACR15BB8B10  Rivet
1  BACR15BB8B13  Rivet
(a)  Kit fasteners may be furnished from operator's existing
stocks.
Jul 21/88  737-53-1116
REV. 1:  Sep 7/89  17

### Page 21 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
2.  The following materials are to be furnished by the operator.
Part Number or
Quantity  Specification  Nomenclature
As Required  BMS 5-95, Class B  Sealant
As Required  BMS 10-11, Type I  Primer
As Required  BMS 10-11, Type I1  Enamel - Color to Match
Airplane
B.  Parts Required to Modify Spares
None
C.  Special Tools and Equipment Required
Coldworking Tools are required during accomplishment of the
preventive modification per this service bulletin. See Paragraph
I.G. for details.
D.  Existing Parts Accountability
None
737-53-1116
Jul 21/88  18
REV. 1:  Sep 7/89

### Page 22 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
II1.  ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1.  The following paragraphs outline the general accomplishment
instructions.  The suggested sequence of operations and
detailed accomplishment instructions are indicated by circle
notes on the figures.
As recommended by the 737 Aging Fleet Structures Working
Group, accomplish the modification per this service bulletin,
Figure 3 of the Accomplishment Instructions prior to, or upon
the accumulation of 75,000 flight cycles.
3. On the figures, unless otherwise specified:
All linear dimensions are in inches
Tolerance on linear dimensions other than rivet and
bolt edge margin is plus or minus 0.03
Tolerance  on rivet and bolt edge margin is plus or
minus 0.05
Hole size for standard solid rivets is per 737
Structural Repair Manual Chapter 51
A.  Open the forward galley door for access to interior surface of door
cutout  accomplish inspection and rework of doorway upper
corners.
B_  Accomplish an eddy current inspection of the skin, skin doubler,
and bearstrap doubler in each upper corner of the doorway per
Figure 1.
C.  If cracked doorway corners are found, repair per Figure 2.
D.  If no cracks are found, accomplish preventive modification per
Figure 3. As an option, reinstall reveal fittings and rivets and
repeat inspection of upper doorway corners at "C" check intervals
until the preventive modification is accomplished.
NOTE: Delayed implementation of the preventive modification may
oversizing requirements beyond the preventive
modification kit range.
E.  Refinish the rework area around doorway as required, and restore
airplane to operational configuration.
J01 21/68  737-53-1:16
REV. 1: Sep 7/89  19

### Page 23 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
STA
STA
312
332.1
000
TYPICAL
030  (8 PLACES)
INSPECTION
TYPICAL
(7 PLACES)  OFWDO  OP  AREA  (TYPICAL)
CAUTION:  WHEN DRILLING OUT EXISTING FASTENERS, DO NOT USE DRILL BIT SIZE ANY
LARGER THAN EXISTING FASTENER DIAMETER.
Carefully drill out existing fasteners in shaded areas.
3) Remove magnesium reveal corner fittings 65-53594-1 (or -501) and 65-  53595-1 (or -501) from bearstrap doubler and retain for later use. Clean
off any sealant residue from exposed area of bearstrap doubler.
) Inspect exposed area of skin (outside) and bearstrap doubler (inside) for
cracks around each removed fastener location (Ref. 737 Nondestructive
Test Manual (NDT) D6-37239, Part 6, Subject 51-00-00, Figure 4).  Depending on inspection  results,  take appropriate  action per
Accomplishment Instructions.
Inspect skin doubler (underneath skin) for cracks around each removed
42).  fastener location (Ref. 737 NDT Manual D6-37239, Part 6, Subject 53-10-  Depending on inspection results, take appropriate action per
Accomplishment Instructions.
FIGURE 1. FORWARD GALLEY DOORWAY UPPER CORNER INSPECTION
737-53-1116
Jul 21/88  20

### Page 24 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
STA  STA  STA
332.1  312  291.5
S-6
TYPICAL 2
CRACK
E TYPICAL  CRACK
S- B-
S- 9
UP
OFWDO
1) Remove existing rain gutter.
Stop drill end of crack (Ref. 737 Structural Repair Manual Subject 51-10-
1).
3) If skin assembly or bearstrap doubler is cracked, install repair strap
and doubler per drawing 65C33800 using kit 65C33800-14.
(4 If skin assembly and bearstrap doubler are cracked, install repair strap,
doubler, and tripler per drawing 65C33800 using kit 65C33800-12.
5 If skin assembly or bearstrap doubler is cracked, install repair strap
and doubler per drawing 65C33800 using kit 65C33800-15.
• If skin assembly and bearstrap doubler are cracked, install repair strap,
doubler, and tripler per drawing 65C33800 using kit 65C33800-13.
Install new rain gutter and appropriate filler strips under gutter per
drawing 65C33800 using kit 65C33800-16. Trim filler strips as required,
depending on which repair kits are installed.
FIGURE 2. CRACK REPAIR - FORWARD GALLEY DOORWAY
737-53-1116
Jul 21/88
21

### Page 25 (OCR)

BOEING SERVICE BULLETIN 737-53-1116
STA
332.1
I8 PLATES, ORG
EQ TYPICA  (7 PLACES
S- 8-  UPPER
FORWARD
CORNER
UP
UPPER  AFT  OFWDO
CORNER
Drill out fastener holes to the appropriate starting hole size for 1/4
inch diameter rivets and high interference sleeve cold working method
(Ref. 737 Structural Repair Manual Subject 51-30-9).
Cold work fastener holes in uncracked corners using high interference
sleeve method (Ref. 737 Structural Repair Manual Subject 51-30-9).
Enlarge fastener holes in reveal fittings to 0.254-0.265 inch diameter.
Apply sealant (Ref. BMS 5-95) to faying surface of fittings, and position
in place on bearstrap doubler.
Install indicated fasteners from kit 65033801 or from operators stock.
FASTENER CODE
• Install rivet BACR15BB8B(*) wet with sealant (Ref. BMS 5-95), with
manufactured head near side.
• Enlarge countersink far side to 0.425-0.431 inch diameter. Install rivet
BACR15BB8B10 wet with sealant (Ref. BMS 5-95) and with manufactured head
near side. Shave the formed head (far side) as required to be flush with
structure.
(*) Grip length of fastener indicated by number adjacent to fastener
symbol.
FIGURE 3. PREVENTIVE MODIFICATION - FORWARD CALLEY DOORWAY
137-55-1116
Jul 21/88  22

### Page 26 (OCR)

BOEING
SERVICE BULLETIN
EVALUATION FORM
THIS EVALUATION FORM IS PROVIDED FOR THE PURPOSE OF COMPUNICATING IMFORMATION TO  THE LOEING ORGANIZATION RESPONSIBLE FOR SERVICE BULLETINS AND THEIR ONTENT. THE
DATA YOU PROVIDE WILL BE USED TO IMPROVE THE BOEING SERVICE BULLETIN PROGRAM.
NOTE:  THIS FORM IS NOT INTENDED TO BE USED FOR REQUESTING SERVICE BULLETIN  INCORPORATION INTO BOEING TECHNICAL MANUALS.
S/B NO.:  737-53-1116 REV.1  S/B DATED: SEPTEMBER 7, 1989
TITLE:  FUSELAGE - FORWARD GALLEY DOORWAY UPPER CORNERS - INSPECTION,
REPAIR, AND PREVENTIVE MODIFICATION
OPERATOR:  AIRPLANES AFFECTED  Oper S/B effeotivity 11st
(check one) :  per corrected list below:
PREPARED BY:  TITLE:  DATE:
ORGANIZATION:  _ TELEX CODE:
EVALUATION:
check CNE of the following  five circles  AND  check ONE of the following  seven circles.
- Inspection
- Will accomplish  - Partial incorporation
Being accomplished  - Complete incorporation
Have accomplished
- Service bulletin intent
- Uneconomical
Will not accomplish  - Service experience does not justify
- Decision deferred (oxplain)  - Other (explain below)
COMMENTS:  Bulletin Quality, Suggested Improvements, Other.
FOR ADDITIONAL COMMENTS USE REVERSE SIDE
Please forward this form to your Boeing Field Service Representative or mail
directly to:
Attention:  R. G. Kelsey
Boeing Commercial Airplanes  Manager,  Service Bulletin Engineering
P.O. Box 3707  Seattle, WA 98124  Mail Stop 2L-02

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
