# Boeing Service Bulletin 737-53-1120: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-1317; AD 2013-24-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 737-53-1120](https://openairdocs.org/service-documents/boeing/sb-737-53-1120.md)
- Title as filed: U.S. DOT/FAA - SB-737-53-1120-01
- Pages: 321
- PDF: https://openairdocs.org/files/sha256/4f/67/4f67bf80a29fbd5b21c8839676f60ee409d1d523064490a6bf89e8d72a7e0a5d
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1120/file/4f67bf80a29f

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial
Airplane
Group
737
Service Bulletin
Number: 737-53-1120 Revision Transmittal SheetDate: July 6, 1989
Revision 1: May 13, 1993
ATA System: 5321
SUBJECT: FUSELAGE - BODY STATION 520 FLOOR BEAM INSPECTION, REPAIR AND
PREVENTIVE CHANGE
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
On 737-100, 737-200, 737-200C, 737-300, 737-400 airplanes, make changes to a repair that was installed
by the initial release. On 737-100, 737-200, 737-300, 737-400 airplanes, check the preventive change done
by the initial release of this service bulletin. If necessary, make the changes shown to get the clearances
given in this revision. Refer to Paragraph I.D. for compliance information.
SUMMARY
The 737-100 and 737-200 Airplanes are in Groups 1, 2 and 3. The 737-300 and 737-400 Airplanes are in
Groups 7 and 8. The 737-200C Cargo Airplanes are in Groups 4, 5 and 6. The table on page 54 of the
Accomplishment Instructions gives the work instructions for each channel location. Do only those work
instructions that are applicable to the airplane group.
Revision 1 is sent to :
1. Give different floor beam repair kits and make changes to a floor beam repair that was installed by the
initial release.
2. Make changes to the cargo posts and the electrical bracket (These changes are necessary to install the
channel with a pivot link).
3. Change the crack limits.
4. Delete the reference to a letter check ("C" check).
5. Give a different inspection threshold and repeat inspection interval in flight cycles.
6. Add a floor beam eddy current inspection (done before a preventwrive change or repair is made).
7. Give other instructions and information as shown in Paragraph I.B., Reason.
Included in this revision is the information that Notice of Status Change 737-53-1120NSC2 (NSC2), NSC4
and NSC5 told the operator was necessary to change the floor beam. The electrical bracket information
given in NSC5 is made better. The information in NSC1 and NSC3 has changed and is not included in
Revision 1. Paragraph I.A., Effectivity, shows changes of airplane operators. Each operator should examine
the Effectivity paragraph for changes. Vertical lines are put on the left edge of each page, except in
Paragraph I.A., Effectivity, to show the location of important changes.
REVISION HISTORY
Initial Release: July 6, 1989
Revision 1 May 13, 1993
BOEING COMMERCIAL AIRPLANE GROUP P.O. BOX 3707 SEATTLE, WASHINGTON 98124-2207

### Page 2

(No text on this page.)

### Page 3

Commercial
Airplane
Group
737
Service Bulletin
Number: 737-53-1120 SummaryDate: July 6, 1989
Revision 1: May 13, 1993
ATA System: 5321
SUBJECT: FUSELAGE - BODY STATION 520 FLOOR BEAM INSPECTION, REPAIR AND
PREVENTIVE CHANGE
BACKGROUND
28 operators gave reports of fatigue cracks in the
Body Station (BS) 520 floor beam area. In these
reports, 109 airplanes were found with cracks in the
floor beam area. Seven of these airplanes were
found with cracks in at least one of the channels in
the floor beam. Four of these airplanes were found
with cracks in at least one of the intercostals that
attach to the floor beam. The largest crack in the
floor beam was 8.5 inches long. The largest crack
in the channel was 2.5 inches long. The largest
crack in the intercostal was three inches long.
These airplanes had between 7700 and 69,900 flight
hours and between 4700 and 67,000 flight cycles.
Three operators gave reports of cracks in the
channel only. Boeing Structural Item Interim
Advisory (SIIA) 737-140 is related to this service
bulletin. These fatigue cracks occur when the
intercostal link puts a force on the floor beam
channel. This occurs because of the thermal
contraction of the fuselage skin during flight that
causes relative movement between the floor beam
and wing box in the forward-aft direction.
The pivot link installed in this service bulletin permits
relative movement to occur without this force.
Fatigue cracks are thus prevented.
Revision 1 gives different floor beam repair kits and
makes changes to a floor beam repair that was
installed by the initial release. Revision 1 also
makes changes to the cargo posts and the electrical
bracket.
ACTION (PRR34556)
Make an inspection of the channel location for
cracks. Install a channel with a pivot link if cracks
are found in the channel only. Install a channel with
a pivot link, two repair angles and two fillers below
the floor beam flange if cracks are found in the
adjacent floor beam area. If no cracks are found in
the channel or in the adjacent floor beam area,
install a channel with a pivot link only or repeat the
inspection procedure until a channel with a pivot link
is installed. Make an inspection of the adjacent
intercostal if cracks are found in the floor beam.
Repair or replace an intercostal if it is cracked.
Refer to Paragraph I.C. if a preventive change or a
repair was done at a channel location by the initial
release.
COMPLIANCE
Boeing recommends that the operator make an
inspection of the floor beam and the channels for
cracks before the airplane gets 4500 flight cycles.
Refer to the compliance information in Figure 1 for
the repeat inspection interval.
For airplanes with more than 4500 flight cycles, do
the above inspection no later than 4500 flight cycles
after you get this service bulletin.
Refer to Paragraph I.D. if a preventive change or a
repair was done at a channel location by the initial
release.
EFFECTIVITY
All 737-100, 737-200 and 737-200 cargo airplanes.
737-300 and 737-400 airplanes in line positions 1
through 1717.
MANPOWER
Refer to Paragraph I.F.
MATERIAL INFORMATION
Boeing Supplied Kits and Operator Supplied Parts.
BOEING COMMERCIAL AIRPLANE GROUP P.O. BOX 3707 SEATTLE, WASHINGTON 98124-2207 Summary Page 1 of 2

### Page 4

BOEING SERVICE BULLETIN 737-53-1120
WING BOX
REPLACE THE CHANNEL AND REPAIR
THE FLOOR BEAM IF NECESSARY
MAKE AN INSPECTION FOR CRACKS
CARGO AIRPLANES SIMILAR (NO CHANNEL AT BL 0)
EXISTING CHANNEL LOCATION ON A PASSENGER AIRPLANE SHOWN,
INTERCOSTAL LINK
WING BOX
BS
520
FLOOR BEAM
FWD INBD
REPAIR OR REPLACE
INTERCOSTAL IF
NECESSARY
BS
520
NO SEAT TRACK
AT BL 0
B54180
Jul 6/89
REV 1: May 13/93 Summary Page 2 of 2

### Page 5

Commercial
Airplane
Group
737
Service Bulletin
Number: 737-53-1120
Date: July 6, 1989
Revision 1: May 13, 1993
ATA System: 5321
SUBJECT: FUSELAGE - BODY STATION 520 FLOOR BEAM INSPECTION, REPAIR AND
PREVENTIVE CHANGE
I. PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index Document D6-19567, Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR34556 for data about this change.
IDENTIFICATION BY CUSTOMER, CUSTOMER CODE, GROUP AND VARIABLE NUMBER
AER LINGUS (ARL)
1 PG255 PG573 PG575
3 PK029 PK614 PK641-PK642
4 PY322-PY323
6 PY281
7 PP951-PP952
AEROLINEAS ARGENTINAS (ARG)
1 PH705-PH708
2 PH741-PH742
3 PH743 PK102-PK103
5 PY007
AIR ALGERIE (ALG)
3 PK361 PK631 PK633-PK634 PL717-PL725
5 PY051-PY052
6 PY053
AIR ATLANTA ICELANDIC (AID)
1 PG047 PJ104
3 PJ004 PL027
4 PY002
5 PY381
AIR CHINA (BEJ)
3 PM281-PM283
7 PP521-PP522
AIR COLUMBUS (COB)
7 PP904 PP907
Jul 6/89 737-53-1120
REV 1: May 13/93 Page 1 of 316

### Page 6

BOEING SERVICE BULLETIN 737-53-1120
AIR EUROPA (ARE)
7 PM382 PP501-PP502 PP831 PP835 PP840 PP846
AIR FRANCE (AFA)
3 PL502-PL503 PN101-PN117
7 PP902 PP910-PP912
AIR GABON S.A. (GBN)
6 PY191
AIR GUINEE (GNE)
6 PY651
AIR HOLLAND CHARTER B.V. (HOL)
7 PP504
AIR LANKA, LTD. (LNK)
1 PH701
3 PK252
AIR MADAGASCAR (MAD)
1 PG375
2 PL793
AIR MALTA (MLT)
3 PL621-PL626
AIR NAMIBIA (NAM)
3 PN492
AIR NAURU (NAU)
3 PK356 PK581
6 PY286
AIR NEW ZEALAND, LTD. (ANZ)
3 PJ009 PK047 PK051 PK211 PK213-PK214 PK216-PK220
PM181
6 PY741
AIR NIPPON CO., LTD. (ANK)
2 PG582
AIR SWEDEN (TIS)
1 PJ002
2 PJ003
AIR TANZANIA (TNZ)
6 PY611-PY612
AIR UK (LEISURE) (UKL)
8 PW001
AIR ZAIRE (ZAI)
6 PY111 PY113
AIR ZIMBABWE (ZMB)
3 PN431-PN433
Jul 6/89 737-53-1120
REV 1: May 13/93 2

### Page 7

BOEING SERVICE BULLETIN 737-53-1120
ALASKA AIRLINES (ASA)
6 PY112 PY134-PY135 PY270 PY461-PY463
ALL NIPPON AIRWAYS CO. LTD. (ANA)
2 PG584-PG586
3 PK711-PK716
ALOHA (ALO)
1 PG046
3 PK286-PK287 PK305 PK691-PK695 PK697
4 PY001
6 PY231 PY242 PY451
7 PP730 PP733 PP825-PP826
ALYEMDA DEM. YEMEN AIRLINES (ALY)
6 PY409-PY410
AMERICA WEST AIRLINES, INC. (AMW)
1 PC004 PG036 PL801
3 PK283 PK565 PK625-PK626 PK696 PL081 PL172
PL551-PL562
7 PP181-PP187 PP189 PP192 PP194-PP197 PP732 PP891-PP899
PP901 PP903 PP931-PP934
ANGOLA AIRLINES (ANG)
3 PK661 PK664-PK666
6 PY162
ANSETT AIRLINES OF AUSTRALIA (ANS)
7 PQ026-PQ041
ANSETT WORLDWIDE AVIATION SERVICES (AWW)
1 PA001 PA003-PA004
ARAMCO ASSOCIATED CO. (ARM)
3 PL151 PL456
6 PY241 PY243-PY244
ASEAN AVIATION (L) INC. (ASJ)
1 PG578
2 PG579-PG581 PG583
ASIANA AIRLINES (AAR)
8 PW005 PW007-PW009 PW011 PW013
AUSTRALIAN AIRLINES LIMITED (AUS)
7 PQ001-PQ014
AVENSA (AVN)
3 PK042-PK043
7 PM383
AVIATECA (AVT)
1 PG201
2 PL737 PL740-PL741
7 PP352 PP379 PP384 PP948
Jul 6/89 737-53-1120
REV 1: May 13/93 3

### Page 8

BOEING SERVICE BULLETIN 737-53-1120
AVIATION SALES CO., INC. (ASC)
1 PG224 PG331 PG401 PG572
4 PY342 PY344
AVIOGENEX AIR TRANSPORT (AVG)
3 PL501 PL506 PN501-PN502
BAVARIA (BAV)
3 PL455
BOSPHORUS AIRLINES (BHY)
7 PP773 PP775
BOURAQ INDONESIA AIRLINES (PTB)
1 PJ001 PL803
2 PL742
BRAATHENS S.A.F.E. (BRT)
1 PJ072
3 PJ006-PJ008 PK882 PN451-PN453 PN455
BRITANNIA AIRWAYS, INC. (BRI)
1 PJ101 PJ103
2 PJ105-PJ106 PL716
3 PJ108 PJ110-PJ111 PJ113-PJ115 PJ117-PJ119 PK215 PK801-PK804
BRITISH AIRWAYS (BAB)
3 PK731-PK765 PK771-PK777 PK779 PK820 PL421
7 PP351 PP353 PP380
8 PW091-PW092 PW111-PW112
BRITISH MIDLAND (BMA)
7 PP908-PP909 PP915-PP916 PQ281
8 PW004 PW006 PW501
CAMEROON AIRLINES (CAM)
3 PM171
5 PY046-PY047
CANADIAN AIRLINES INTERNATIONAL LTD. (CDI)
1 PG651-PG652
2 PK026 PL761-PL762
3 PK027-PK028 PK221 PK358 PK671-PK675 PK677-PK681 PK822
PK881 PK884 PL401-PL417 PL764-PL770 PM141-PM142
4 PY303
5 PY304
6 PY151-PY154 PY421-PY422 PY441
CARNIVAL AIR (CVL)
1 PG302 PG305 PG312
2 PL712
8 PW061
CASINO EXPRESS (CIN)
1 PG279 PG436
CAYMAN AIRWAYS (CAY)
3 PK222 PK561 PK622
Jul 6/89 737-53-1120
REV 1: May 13/93 4

### Page 9

BOEING SERVICE BULLETIN 737-53-1120
CHINA AIR LINES, INC. (CHI)
3 PN472-PN474
CHINA SOUTHERN AIRLINES (GUN)
3 PK636-PK637 PM251-PM254 PN405
CHINA SOUTHWEST AIRLINES (XIN)
7 PP631-PP634
CHINA XINHUA AIRLINES (XIH)
6 PY401 PY594-PY595
CITICORP NORTH AMERICA (CIC)
3 PK082
CONTINENTAL AIRLINES, INC. (CAL)
1 PA006-PA014 PA016-PA020 PG056 PG064 PG199 PG225
PG229 PG432-PG433 PG501-PG505 PG621-PG625 PG627-PG628 PG630
PG704
2 PG441-PG442
3 PL001
7 PP671-PP699 PP701-PP726
COPA COMPANIA PANAMENA DE AVIATION S.A. (COP)
1 PC001
3 PJ107 PJ112
4 PY341
CORSE AIR INTERNATIONAL (COR)
7 PP838
CROATIA AIRLINES (CRH)
3 PK904 PK906-PK907
DELTA AIR LINES, INC. (DAL)
3 PK611 PK613 PK623-PK624 PK632 PL221 PL611
PN131-PN163 PN401-PN404 PN407-PN420
7 PP231-PP243
DRAGONAIR (DRG)
3 PK357 PK617 PK871-PK873
DUKE FARMS (DFI)
7 PP991
E G AND G (EGN)
1 PG037 PG208 PG210 PG215 PG431
3 PL763
EAST WEST AIRLINES (INDIA) (BOM)
3 PK615-PK616 PK819 PK824 PL171 PL758
EDRESS, SHIEKH M. (SME)
3 PL505
EGYPTAIR (EGP)
3 PK254-PK255 PK257-PK258
Jul 6/89 737-53-1120
REV 1: May 13/93 5

### Page 10

BOEING SERVICE BULLETIN 737-53-1120
EL AL ISRAEL AIRLINES, LTD. (ELA)
3 PL631-PL632
ETHIOPIAN AIRLINES, CORP. (ETH)
3 PN512
EURALAIR (ERA)
1 PG026 PG028-PG029
4 PY004 PY006
EUROPE AERO SERVICE (EUR)
3 PK203 PK282 PK359 PK564 PK612
FAR EASTERN AIR TRANSPORT (FAT)
1 PA002 PA005 PG055 PG226 PG228 PG230
3 PK562 PN481
FAUCETT (COMPANIA DE AVIATION S.A. (FCT)
1 PC002 PG034 PG213
2 PL711
FORTUNE AVIATION (FOR)
3 PK432
FRENCH POSTAL OFFICE (FPO)
4 PY302
6 PY101-PY103
7 PS641
GARUDA INDONESIAN AIRWAYS (GIA)
7 PQ282
GATARI AIR SERVICE (GRI)
3 PL441
GERMANIA FLUGGESELLSCHAFT MBH (GER)
7 PP503 PP506-PP507 PQ231-PQ236
GOVERNMENT OF BRAZIL (BRZ)
3 PK068-PK069
GOVERNMENT OF MEXICO (MXG)
1 PC005 PG223
GOVERNMENT OF SHARJAH (SHJ)
3 PL581
GPA GROUP LTD. (GUI)
3 PK241 PK354-PK355
7 PP301 PP303-PP305 PP827 PP833-PP834
GULF AIR (GUL)
3 PK461-PK468
HAPAG LLOYD (HAP)
3 PL504
8 PW511-PW514
Jul 6/89 737-53-1120
REV 1: May 13/93 6

### Page 11

BOEING SERVICE BULLETIN 737-53-1120
HEAVYLIFT AIRCRAFT ENGINEERING (HVL)
3 PJ109
ICELANDAIR (ICE)
8 PW561
INDIAN AIR FORCE (IDF)
1 PH712
2 PH713
3 PM016-PM017
INDIAN AIRLINES (IND)
1 PH709 PH711
3 PH021-PH022 PH024 PK231-PK233 PK235-PK240 PM001-PM006
6 PY631
INDONESIAN AIR FORCE (IDO)
3 PL601-PL603
INTEGRATED RESOURCES (INH)
1 PG271 PG273 PG629
INTER EUROPEAN AIRWAYS (IER)
7 PP841-PP842
INTERNATIONAL AIR LEASES (IAL)
1 PG043 PG048 PG253
INTERNATIONAL PACIFIC TRADING CO. (IPT)
1 PG574 PJ102
IRAN AIR (IRN)
2 PH731
3 PK391
5 PY021-PY022
IRAQI AIRWAYS (IRQ)
6 PY141-PY142
ISTANBUL AIRLINES (IST)
8 PW002
JUGOSLOVENSKI AEROTRANSPORT (JAT)
7 PP771-PP772 PP774 PP776-PP779
KENYA AIRWAYS (KEN)
3 PK253 PK256
KLM ROYAL DUTCH AIRLINES (KLM)
7 PP861-PP873
KOREAN AIR FORCE (KAF)
7 PP221
LADECO (LDE)
1 PL802
3 PJ005 PK212 PK281 PK826 PK830
7 PP946
Jul 6/89 737-53-1120
REV 1: May 13/93 7

### Page 12

BOEING SERVICE BULLETIN 737-53-1120
LAN-CHILE S.A. (LAN)
3 PK360 PK825 PL025 PL028
LAUDA AIR LUFTFAHRT AG (LAL)
7 PP851-PP852
LINA CONGO (LNA)
6 PY411
LINHAS AEREAS DE MOCAMBIQUE (LAM)
1 PH703
5 PY031
LITHUANIAN AIRLINES (LIJ)
3 PK563
LUFTHANSA GERMAN AIRLINES (DLH)
3 PK901-PK903 PK905 PK908-PK938
5 PY345-PY346
7 PQ051-PQ068 PQ086-PQ092
MAERSK AIR (MRS)
7 PP505
MALAYSIAN AIRLINES SYSTEM BERHAD (MAS)
3 PL743-PL747
6 PY201
MALEV HUNGARIAN AIRLINES (HGA)
3 PK284-PK285 PK827
MANDALA AIRLINES (MND)
3 PN001-PN002
MARKAIR, INC. (ALK)
3 PN493
6 PY056-PY057 PY592-PY593
7 PQ226
8 PW502
MONARCH AIRLINES, LTD. (MON)
7 PM381 PP821 PP823-PP824 PP832 PP913-PP914
MONTELY II (MOY)
1 PJ031
MORRIS AIR (MOR)
7 PP164-PP165 PP201-PP205 PP378 PP382 PP727
NASA (NAS)
1 PA099
NICA (NICARAGUENCE DE AVIACION) (NIC)
3 PK823
NIGERIA AIRWAYS, LTD. (NIA)
2 PL781-PL782
3 PL784-PL788
Jul 6/89 737-53-1120
REV 1: May 13/93 8

### Page 13

BOEING SERVICE BULLETIN 737-53-1120
NORDAM (NOP)
3 PK352
NWT AIR (NTA)
4 PX701
6 PY132-PY133
OLYMPIC AIRWAYS (OLY)
3 PK301-PK304 PK307-PK310 PM021-PM023
P. T. AIRFAST (PTF)
1 PG204 PG278
4 PY343
PAKISTAN INTERNATIONAL AIRLINES CORP. (PIA)
7 PP281-PP286
PAN AMERICAN WORLD AIRWAYS, INC. (PAA)
1 PG020-PG021
PEGUSUS CAPITAL CORPORATION (PSS)
7 PP162
PETROLAIR SYSTEMS S. A. (PTS)
3 PL471
PHILIPPINE AIRLINES, INC. (PAL)
7 PP935-PP936
PLUNA (PLU)
3 PL201-PL203
POLARIS AIRCRAFT LEASING CORP. (PLS)
1 PG202 PG205 PG207 PG211 PG216 PG218
PG272
3 PL061
7 PP188 PP190-PP191 PP302
POLY TECHNOLOGIES, INC. (PTI)
7 PP728-PP729
POLYNESIAN AIRLINES (PLY)
7 PP947
PRIVATE FLIGHT DIRECTORATE (ABU DHABI) (ABD)
3 PK495
REPUBLIC OF NIGER (NIR)
6 PY166
ROYAL AIR MAROC (RAM)
3 PK271-PK274
6 PY671-PY672
SABENA S.A. (SAB)
3 PK041 PK044-PK046 PK048-PK050 PK052-PK053 PK431 PK433
6 PY272-PY275
7 PP961-PP967
Jul 6/89 737-53-1120
REV 1: May 13/93 9

### Page 14

BOEING SERVICE BULLETIN 737-53-1120
SAHSA (SERVICIO AEREO DE HONDURAS,S.A.) (SAH)
1 PJ032 PJ071
2 PL736 PL738
SAUDI ARABIAN AIRLINES CORP. (SVA)
2 PL726-PL728
3 PK311-PK317 PL729-PL735
5 PY036-PY037
SAUDI ROYAL FLEET (SRF)
3 PK318
SERVICIOS AEREOS RUTAS ORIENTE, (SARO) (SEV)
1 PA015 PA021-PA022
3 PK351 PK353
SHANNONAIR LEASING LTD. (SLE)
3 PK451-PK452
SIERRA PACIFIC AIRLINES (SRP)
1 PC003 PG217 PG577
3 PK627
7 PP169 PP381
SINGAPORE AIRLINES, LTD (SIA)
7 PQ222
SOUTH AFRICAN AIRWAYS (SAA)
1 PG353-PG356
3 PL101-PL113
SOUTHEAST PACIFIC AIRWAYS (SOU)
1 PG219
SOUTHWEST AIRLINES CO. (SWA)
3 PK091-PK099 PK541-PK560 PK621 PK628-PK630 PM051-PM066
7 PP101-PP145 PP161 PP163 PP166-PP168 PP193 PP731
PP822
SOUTHWEST-SWAL (SWL)
3 PK521 PK523-PK528 PN454 PN456
SUDAN (SUD)
6 PY156-PY157
SULTANAIR (SLR)
1 PG251
T A PORTUGUESES (TAP)
3 PK971 PK973-PK974 PL451-PL452 PN081-PN086
6 PY721
7 PP984 PQ301-PQ303
TACA INTERNATIONAL AIRLINES, INC. (TAC)
1 PG059 PG352
3 PK223 PN491
6 PY131
Jul 6/89 737-53-1120
REV 1: May 13/93 10

### Page 15

BOEING SERVICE BULLETIN 737-53-1120
TAESA (TES)
8 PW010
TAT EUROPEAN AIRLINES (TTR)
4 PY003 PY301 PY321 PY361-PY362
TEA BASEL (TEB)
7 PP845 PQ224-PQ225
THAI AIR FORCE (TAF)
3 PK519
THAI AIRWAYS INTERNATIONAL, INC. (TII)
3 PK511 PK514-PK515
TRANS EUROPEAN AIRWAYS ITALIA S.P.A. (TEI)
7 PQ221 PQ223
TRANSAVIA AIRLINES (TAV)
1 PG074
3 PK501-PK504 PK821
7 PP801-PP806
TRANSBRASIL AIRLINES INC. (TBL)
7 PP836-PP837 PP843-PP844 PP847-PP848 PQ241-PQ243
TRANSMED (TRZ)
8 PW012
TRANSTAR (AFM)
1 PG274 PG276 PG403
3 PK306
TUNIS AIR (TUN)
3 PK861-PK863
6 PY621
UNITED AIR LINES, INC. (UAL)
1 PG001-PG004 PG006-PG013 PG015-PG019 PG022-PG025 PG027 PG030
PG032-PG033 PG038-PG040 PG045 PG051-PG054 PG057 PG060-PG063
PG065-PG072 PG075
3 PK201-PK202 PL002-PL023
7 PQ101-PQ157
UNITED STATES AIR FORCE (USF)
2 PJ201
3 PJ202-PJ219
USAIR, INC. (USA)
1 PG041-PG042 PG073 PG206 PG301 PG303-PG304 PG306-PG311
PG313-PG314 PG474 PG576
3 PK288-PK289 PK591-PK599 PK601-PK610 PK883 PM101-PM119 PN021-PN043
7 PP001-PP010 PP012-PP049 PP376-PP377 PP383 PP401-PP440 PP471-PP475
8 PV001-PV010 PV012-PV017
VARIG (CRU)
3 PK141-PK146
Jul 6/89 737-53-1120
REV 1: May 13/93 11

### Page 16

BOEING SERVICE BULLETIN 737-53-1120
VARIG AIRLINES (VAR)
3 PK111-PK116 PK118-PK120 PL453-PL454
7 PP839 PP905-PP906 PP981-PP982 PQ251-PQ255
VARSA (VAB)
1 PG351
VASP (VSP)
1 PG435 PG437 PG439-PG440 PG471-PG473
2 PL756
3 PH011-PH013 PK061-PK062 PK065-PK067
4 PX071
VENEZUELA - GOVERNMENT OF (VNZ)
3 PK070
VISCOUNT AIR SERVICE INC. (VAS)
1 PG203 PG209 PG212 PG220-PG222
VIVA AIR (VIV)
7 PP391-PP393 PP983
WHIRLPOOL FINANCIAL CORP (ZZW)
1 PG214
XIAMEN AIRLINES CO. LTD. (XIA)
3 PK635 PK874 PM255 PN521
YEMEN AIRWAYS (YEM)
3 PK341
YUNNAN PROVINCIAL IMPORT & EXPORT CORP. (YUN)
7 PP651-PP652
ZAMBIA AIRWAYS (ZAM)
3 PK291 PL026
IDENTIFICATION BY VARIABLE NUMBER
GROUP 1
PA001-PA022 PA099 PA231-PA232 PC001-PC005 PG001-PG075 PG199
PG201-PG230 PG251-PG255 PG271-PG279 PG301-PG314 PG331-PG332 PG351-PG356
PG375 PG401-PG403 PG431-PG440 PG471-PG475 PG501-PG505 PG571-PG578
PG621-PG630 PG651-PG652 PG701-PG705 PH701-PH712 PJ001-PJ002 PJ031-PJ032
PJ071-PJ072 PJ101-PJ104 PL801-PL803
GROUP 2
PG441-PG442 PG579-PG586 PH713-PH715 PH731-PH732 PH741-PH742 PJ003
PJ105-PJ106 PJ201 PK026 PL711-PL712 PL716 PL726-PL728
PL736-PL742 PL756 PL761-PL762 PL781-PL782 PL793
Jul 6/89 737-53-1120
REV 1: May 13/93 12

### Page 17

BOEING SERVICE BULLETIN 737-53-1120
GROUP 3
PH001 PH011-PH013 PH021-PH024 PH743 PJ004-PJ009 PJ107-PJ119
PJ202-PJ219 PK027-PK029 PK041-PK053 PK061-PK070 PK081-PK082 PK091-PK099
PK101-PK103 PK111-PK120 PK141-PK146 PK201-PK204 PK211-PK223 PK231-PK241
PK251-PK258 PK271-PK274 PK281-PK289 PK291 PK301-PK318 PK341
PK351-PK361 PK391 PK431-PK433 PK451-PK452 PK461-PK469 PK495
PK501-PK504 PK511-PK515 PK519 PK521-PK528 PK541-PK565 PK581
PK591-PK599 PK601-PK617 PK621-PK637 PK641-PK642 PK661-PK666 PK671-PK681
PK691-PK697 PK711-PK716 PK731-PK765 PK771-PK779 PK801-PK804 PK819-PK827
PK830 PK861-PK863 PK871-PK874 PK881-PK884 PK901-PK938 PK971-PK974
PL001-PL028 PL061 PL081 PL101-PL113 PL151 PL171-PL172
PL201-PL203 PL221 PL401-PL417 PL421 PL441 PL451-PL456
PL471 PL491 PL501-PL506 PL551-PL562 PL581 PL601-PL603
PL611 PL621-PL626 PL631-PL632 PL717-PL725 PL729-PL735 PL743-PL747
PL758 PL763-PL770 PL783-PL788 PM001-PM006 PM016-PM017 PM021-PM023
PM051-PM066 PM101-PM119 PM141-PM142 PM171 PM181 PM251-PM255
PM281-PM283 PN001-PN002 PN021-PN043 PN081-PN086 PN101-PN117 PN131-PN163
PN401-PN420 PN431-PN433 PN451-PN456 PN471-PN474 PN481 PN491-PN493
PN501-PN502 PN511-PN512 PN521
GROUP 4
PX071 PX701 PY001-PY006 PY301-PY303 PY321-PY323 PY341-PY344
PY361-PY362
GROUP 5
PY007-PY008 PY021-PY022 PY031 PY036-PY037 PY046-PY047 PY051-PY052
PY304 PY345-PY346 PY381
GROUP 6
PY048 PY053 PY056-PY057 PY101-PY103 PY111-PY113 PY131-PY135
PY141-PY143 PY151-PY154 PY156-PY157 PY161-PY162 PY166 PY191
PY201 PY221-PY222 PY231 PY241-PY244 PY270-PY275 PY281
PY286 PY401 PY409-PY411 PY421-PY422 PY441 PY451
PY461-PY463 PY591-PY595 PY611-PY612 PY621 PY631 PY651
PY671-PY672 PY721 PY741
GROUP 7
PM381-PM383 PP001-PP049 PP101-PP145 PP161-PP169 PP181-PP197 PP201-PP205
PP221 PP231-PP243 PP281-PP286 PP301-PP305 PP351-PP353 PP376-PP384
PP391-PP393 PP401-PP440 PP471-PP475 PP501-PP507 PP521-PP522 PP631-PP634
PP651-PP652 PP671-PP699 PP701-PP733 PP771-PP779 PP801-PP806 PP821-PP827
PP831-PP848 PP851-PP852 PP861-PP873 PP891-PP899 PP901-PP916 PP931-PP936
PP946-PP948 PP951-PP952 PP961-PP967 PP981-PP984 PP991 PQ001-PQ014
PQ026-PQ041 PQ051-PQ068 PQ086-PQ092 PQ101-PQ157 PQ221-PQ226 PQ231-PQ236
PQ241-PQ243 PQ251-PQ255 PQ281-PQ282 PQ301-PQ303 PS641
GROUP 8
PV001-PV017 PW001-PW013 PW061 PW091-PW092 PW111-PW112 PW501-PW502
PW511-PW514 PW561
2. Spares
None.
Jul 6/89 737-53-1120
REV 1: May 13/93 13

### Page 18

BOEING SERVICE BULLETIN 737-53-1120
B. Reason
28 operators gave reports of fatigue cracks in the Body Station (BS) 520 floor beam area. In these
reports, 109 airplanes were found with cracks in the floor beam area. Seven of these airplanes were
found with cracks in at least one of the channels in the floor beam. Four of these airplanes were
found with cracks in at least one of the intercostals that attach to the floor beam. The largest crack in
the floor beam was 8.5 inches long. The largest crack in the channel was 2.5 inches long. The
largest crack in the intercostal was three inches long. These airplanes had between 7,700 and
69,900 flight hours and between 4700 and 67,000 flight cycles. Three operators gave reports of
cracks in the channel only. Boeing Structural Item Interim Advisory (SIIA) 737-140 is related to this
service bulletin. These fatigue cracks occur when the intercostal link puts a force on the floor beam
channel. This occurs because of the thermal contraction of the fuselage skin during flight that causes
relative movement between the floor beam and wing box in the forward-aft direction.
The pivot link installed in this service bulletin permits relative movement to occur without this force.
Fatigue cracks are thus prevented.
NOTE: In Revision 1, the airplane effectivity is divided in groups that are different from the initial
release.
Revision 1 is sent to :
1. Give different floor beam repair kits and make changes to a floor beam repair that was installed by
the initial release.
2. Make changes to the cargo posts and the electrical bracket (These changes are necessary to
install the channel with a pivot link).
3. Change the crack limits.
4. Delete the reference to a letter check ("C" check).
5. Give a different inspection threshold and repeat inspection interval in flight cycles.
6. Add a floor beam eddy current inspection (done before a preventive change or repair is made).
7. Give these other instructions and information :
- Steps to get sufficient clearance between the intercostal link and the channel with a pivot link
(This prevents a force on the channel which can cause cracks to occur from the relative
movement between the intercostal link and the channel)
- Inspection, repair and replacement steps for the four intercostals that attach to the floor beam
- More information to stop-drill the cracks
- Instructions to install parts for the pivot link joint that are larger in width than those specified in
the initial release (737-200C Airplanes only)
- Instructions to spotface the channels with pivot links (737-200C Airplanes only)
- Instructions to make a special channel radius filler if the channel with the pivot link cannot be
installed
- Instructions to make a special channel with a pivot link if the channel with a pivot link given in the
kit cannot be installed with the above channel radius filler
- Instructions to add a corrosion inhibitor to the floor beam areas where changes are made by
Revision 1.
Included in this revision is the information that Notice of Status Change 737-53-1120NSC2 (NSC2),
NSC4 and NSC5 told the operator was necessary to change the floor beam. The electrical bracket
information given in NSC5 is made better. The information in NSC1 and NSC3 has changed and is
not included in Revision 1. Paragraph I.A., Effectivity, shows changes of airplane operators. Each
operator should examine the Effectivity paragraph for changes. Vertical lines are put on the left edge
of each page, except in Paragraph I.A., Effectivity, to show the location of important changes.
Boeing Structural Item Interim Advisory (SIIA) 737-140 is related to this service bulletin.
Jul 6/89 737-53-1120
REV 1: May 13/93 14

### Page 19

BOEING SERVICE BULLETIN 737-53-1120
C. Description
The airplane effectivity in Revision 1 is divided in 8 groups. The airplane model, the "cross section"
of the cargo post and the "cross section" of the electrical bracket give the airplane group as shown in
the table below:
NOTES:
1. 737-100, 200, 300, and 400 Airplanes (Passenger) have five channel - intercostal link
locations.
2. 737-200C Cargo Airplanes have four channel - intercostal link locations.
3. "Cross Section" is the shape of the cargo post and the electrical bracket
Airplane Groups Table
Airplane Group Airplane Model
"Cross Section" of
Cargo Post
Located at Body
Station 520,
Left and Right
Buttock Line 24.75
"Cross Section" of
Electrical Bracket at
Body Station 520,
Right Buttock Line
45.50
1
all 737-100's
and
all 737-200's
"I"
"L"
"Hat"
"Z"
2
3
4
all 737-200C's
"I"
"L"
"Hat"
"Z"
5
6
7 737-300 through lineposition 1717 This cargo post doesnot exist at the Body
Station 520 Floor
Beam
This electrical
bracket does not
exist
at the Body Station
520 Floor Beam8 737-400 through lineposition 1717
No more work is necessary on Group 4, 5, 6 channel locations that had a preventive change done by
the initial release.
If no preventive change or repair was done at a channel location by the initial release (no pivot link
was installed), make an inspection of the channel and the adjacent floor beam for cracks. Install a
channel with a pivot link if cracks are found in the channel only. Install a channel with a pivot link, two
repair angles and two fillers below the floor beam flange if cracks are found in the adjacent floor
beam area. If no cracks are found in the channel or in the adjacent floor beam, install a channel with
a pivot link only or repeat the inspection procedure until a channel with a pivot link is installed. Make
an inspection of the adjacent intercostal if floor beam cracks are found. Repair or replace a cracked
intercostal.
Jul 6/89 737-53-1120
REV 1: May 13/93 15

### Page 20

BOEING SERVICE BULLETIN 737-53-1120
On Group 1, 2, 3, 7, 8 channel locations repaired by the initial release (a channel with a pivot link was
installed on one repair angle), make an inspection of the repair installation. If no cracks are found in
the channel and no more cracks are found in the floor beam area, remove the bolt that attaches the
repair angle to the floor beam flange. Install a radius filler and the larger diameter bolt. Make an
inspection of the adjacent intercostal for cracks. Repair or replace a cracked intercostal. Refer to the
Accomplishment Instructions if more cracks are found in the adjacent floor beam area or if cracks are
found in the channel.
NOTE: Before Revision 1 was released, no Group 1, 2, 3, 7, 8 operators gave reports of cracks in
channel locations repaired by the initial release. However, the crack inspection steps are
given as a precaution. An intercostal link that has insufficient clearance with the channel can
put a force on the channel that can cause it to crack.
On Group 4, 5, 6 channel locations repaired by the initial release, remove the repair installation and
make an inspection of the adjacent floor beam area for more cracks. Stop-drill any cracks if more are
found. Replace the repair angle with two repair angles and install the same channel. Install two
radius fillers below the floor beam flange. Make an inspection of the adjacent intercostal for cracks.
Repair or replace a cracked intercostal.
On Group 1, 2, 3, 7, 8 Airplanes, check the channel locations that had a preventive change done by
the initial release of this service bulletin (a channel with a pivot link was installed). Make any
necessary changes to get the clearances shown in this revision. Refer to Figure 2 for more
information.
NOTE: Before Revision 1 was released, no Group 1, 2, 3, 7, 8 operators gave reports of cracks in
channel locations that had a preventive change done by the initial release of this service
bulletin. However, the crack inspection steps given in Figure 2 are given as a precaution.
An intercostal link that has insufficient clearance with the channel can put a force on the
channel that can cause it to crack.
An evaluation form is attached to this service bulletin. Please use this form to tell us what you think
of the quality of this service bulletin.
NOTES:
1. Inspection and maintenance alternatives are shown in diagrams in Section III.,
ACCOMPLISHMENT INSTRUCTIONS (Figure 1 and Figure 2).
2. If more cracks are found in channel locations that were changed by the initial release, or if the
damaged area is more than the specified limits, write to Boeing for repair instructions. Give the
size and location of the damage. When possible, send sketches and photographs. If the
damage includes corrosion, send data on the length, width, and largest depth of clean up.
SEND TO: BOEING COMMERCIAL AIRPLANE GROUP
ATTENTION: MANAGER, AIRLINE SUPPORT
D. Compliance
No more work is necessary on Group 4, 5, 6 channel locations that had a preventive change done by
the initial release.
If no preventive change or repair was done at a channel location by the initial release, (no pivot link
was installed), Boeing recommends that the operator inspect the channel and the adjacent floor
beam area for cracks before the airplane gets 4500 flight cycles. For airplanes with more than 4500
flight cycles , do the above inspection no later than 4500 flight cycles after you get this service
bulletin. Figure 1 gives the repeat inspection interval and more compliance information.
Jul 6/89 737-53-1120
REV 1: May 13/93 16

### Page 21

BOEING SERVICE BULLETIN 737-53-1120
On Group 1, 2, 3, 7, 8 channel locations repaired by the initial release, Boeing recommends that the
operator make changes to the repair installation no later than 4500 flight cycles after you get this
service bulletin. No more work, as shown in Revision 1 of this service bulletin, is necessary if the
changes to the repair installation are made.
On Group 4, 5, 6 Airplanes channel locations repaired by the initial release, Boeing recommends that
the operator replace the repair installation no later than 4500 flight cycles after you get this service
bulletin. No more work, as shown in Revision 1 of this service bulletin, is necessary at the channel
location if the repair installation is replaced.
On Group 1, 2, 3, 7, 8 channel locations that had a preventive change done by the initial release,
Boeing recommends that the operator make an inspection of the channel and the adjacent floor beam
area for cracks and the correct clearances no later than 4500 flight cycles after you get this service
bulletin. Figure 2 gives more information.
E. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The repairs and
changes specified in this service bulletin comply with the applicable Federal Aviation Regulations
(FAR) and are FAA approved.
F. Manpower
Manpower data for access is given for each airplane. Separate manpower data is given for each
channel location and intercostal that is changed. The manpower data for access together with the
data for the changes give the total value for each airplane.
This estimates below are for direct labor only, done by an experienced crew. Adjust the estimate with
operator man-hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
- Time to adjust to the workplace
- Time to schedule the work
- Time to examine the work
- Time to cure the materials
- Time to make the parts
- Time to find the tools.
1. Manpower data for Group 1, 2, 3, 4, 5, 6, 7, 8 Airplanes if no preventive change or repair was
done at a channel location by the initial release (No pivot link was installed)
NOTES:
1. Before the close visual inspection is done on each airplane, approximately five man-hours
and one person is necessary to open access from below the passenger cabin floor, do an
inspection of every channel location, and close access (Refer to Part I, Accomplishment
instructions).
2. Before the changes in the table below are made, approximately eight man-hours and two
persons are necessary to open access to all of the channel locations from above the
passenger cabin floor on each airplane (Refer to Part V or Part VI, Accomplishment
instructions).
3. Approximately eight man-hours and one person is necessary to repair an intercostal web if it
is cracked (Refer to the 737-100/200 Structural Repair Manual Subject 51-40-2 or refer to
the 737-300/400/500 Structural Repair Manual Subject 51-70-13).
Jul 6/89 737-53-1120
REV 1: May 13/93 17

### Page 22

BOEING SERVICE BULLETIN 737-53-1120
4. Approximately thirteen man-hours and one person is necessary to replace an intercostal
web or an intercostal top chord if it is cracked (Figure 22 or 23).
5. After the changes in the table below are made, approximately eight man-hours and two
persons are necessary to close access on each airplane (Refer to Part V or Part VI,
Accomplishment instructions).
Manpower for the Channel Location Shown
Task
Number of
Persons Man-Hours
Elapsed Time
(Hours)
Group 1, 2, 3, Repair : (Figure 19, 20, 21, 28)
At Left or Right Buttock Line 45.50
At Left or Right Buttock Line 24.75
1
1
18
21
18
21
Group 1, 2, 3 Preventive Change : (Figure19,
20, 21, 25)
At Left or Right Buttock Line 45.50
At Left or Right Buttock Line 24.75
1
1
12
15
12
15
Group 4, 5, 6 Repair : (Figure 19, 20, 21, 41)
At Left or Right Buttock Line 45.50
At Left or Right Buttock Line 24.75
1
1
16
19
16
19
Group 4, 5, 6 Preventive Change : (Figure19,
20, 21, 27)
At Left or Right Buttock Line 45.50
At Left or Right Buttock Line 24.75
1
1
16
19
16
19
Group 7, 8 Repair : (Figure 28)
At Left or Right Buttock Line
45.50 or 24.75
1 15 15
Group 7, 8 Preventive Change : (Figure 25)
At Left or Right Buttock Line
45.50 or 24.75 1 9 9
2. Manpower data for Group 1, 2, 3, 7, 8 Airplanes that had a preventive change done at a channel
location by the initial release (A channel with a pivot link was installed)
NOTES:
1. On each airplane, approximately five man-hours one person is necessary to open access
from below the passenger cabin floor, do an inspection of every channel location, and close
access (Refer to Part II, Accomplishment instructions).
2. At each channel location, approximately one man-hour and one person is necessary to
change the clearance (Refer to Figure 5).
3. Manpower data is not given for work necessary if cracks are found in a channel or if more
cracks are found in the floor beam.
Jul 6/89 737-53-1120
REV 1: May 13/93 18

### Page 23

BOEING SERVICE BULLETIN 737-53-1120
3. Manpower data for Group 1, 2, 3, 4, 5, 6, 7, 8 Airplanes with channel locations repaired by the
initial release (A channel with a pivot link was installed on one repair angle)
NOTES:
1. Before the changes in the table below are made, approximately eight man-hours and two
persons are necessary to open access to all of the channel locations from above the
passenger cabin floor on each airplane (Refer to Part III or IV, Accomplishment
instructions).
2. Approximately eight man-hours and one person is necessary to repair an intercostal web if it
is cracked (Refer to the 737-100/200 Structural Repair Manual Subject 51-40-2 or refer to
the 737-300/400/500 Structural Repair Manual Subject 51-70-13).
3. Approximately thirteen man-hours and one person is necessary to replace an intercostal
web or an intercostal top chord if it is cracked (Figure 22, 23, or 24).
4. After the changes in the table below are made, approximately eight man-hours and two
persons are necessary to close access on each airplane (Refer to Part III or IV,
Accomplishment instructions).
5. Manpower data is not given for work necessary if cracks are found in a channel or if more
cracks are found in the floor beam.
Manpower for Each Channel Location
Task
Number of
Persons Man-Hours
Elapsed Time
(Hours)
Group 1, 2, 3, 7, 8 :
Examine the Channel and Floor Beam
(Figure 7)
1 1 1
Examine the adjacent Intercostal Web
and Top Chord
(Figure 10)
1 0.5 0.5
Change the Repair Installation
(Figure 46)
1 12 12
TOTAL FOR EACH GROUP 1, 2, 3, 7, 8
CHANNEL LOCATION 13.5 13.5
Group 4, 5, 6 :
Examine the Channel and Floor Beam
(Figure 48)
1 1 1
Examine the adjacent Intercostal Web
and Top Chord
(Figure 10)
1 0.5 0.5
Install Two Repair Angles
(Figure 48)
1 9 9
TOTAL FOR EACH GROUP 4, 5, 6
CHANNEL LOCATION
10.5 10.5
Jul 6/89 737-53-1120
REV 1: May 13/93 19

### Page 24

BOEING SERVICE BULLETIN 737-53-1120
G. Material - Price and Availability
Boeing can supply the kits shown in Paragraph II.A.1, Parts and Materials Supplied by Boeing as
shown below. If there is a limit to the quantity of available kits, a supply sequence is given by Spares.
More kits become available as shown in the Reorder Lead Time (ROLT). ROLT is calculated from
the date Boeing gets the purchase order.
Kit Number Name Date Quantity
ROLT
(weeks)
Unit Price thru
Oct 22/93
65C34688-26 Supplemental Kit Feb 5/92 284 19 No Charge
65C34978-28 Supplemental Kit Nov 20/91 20 24 No Charge
65C27712-1 Collector Kit Apr 21/93 25 49 $6698.00
65C27712-2 Collector Kit Apr 21/93 25 49 $6287.00
65C34978-26 Collector Kit Mar 10/92 25 30 $13,134.00
65C34978-27 Collector Kit Mar 10/92 25 30 $12,749.00
Boeing can supply the kits and the intercostal parts listed in Paragraph II.A.1, Parts and Materials
Supplied by Boeing as shown below. Kit and part availability is shown in the Reorder Lead Time
(ROLT). ROLT is calculated from the date Boeing gets the purchase order.
Kit (Part) Number Name
ROLT
(weeks)
Unit Price thru
Oct 22/93
65C34688-25 Supplemental Kit 49 No Charge
65C34688-24 Floor Beam Top Kit 19 $5076.00
65C34688-2 Channel Subkit 48 Boeing Spares
Catalog Item
65C34688-3 Channel Subkit 48 $452.00
65C34688-27 Repair Subkit 22 $713.00
65C34688-8 Cargo Post Top Kit 26 $1621.00
65C34688-9 Cargo Post Top Kit 24 $1151.00
65C34978-25 Floor Beam Top Kit 28 $11,468.00
65C34978-23 Channel Subkit 25 $1704.00
65C34978-22 Repair Subkit 22 $4,652.00
65C34978-31 Repair Subkit 22 $663.00
65C34978-32 Repair Subkit 22 $774.00
65C34978-33 Repair Subkit 22 $774.00
65C34978-34 Repair Subkit 22 $714.00
65C34978-6 Cargo Post Top Kit 17 $1,665.00
65C34978-7 Cargo Post Top Kit 22 $1,221.00
65C35994-1 Electrical Bracket Top Kit 16 $1.00
65C35994-2 Electrical Bracket Top Kit 16 $1.00
65C35994-3 Electrical Bracket Top Kit 22 $59.10
65C35994-4 Electrical Bracket Top Kit 16 $59.10
65C34688-33 Intercostal Web 18 $63.20
65C34688-34 Intercostal Top Chord 15 $70.00
Jul 6/89 737-53-1120
REV 1: May 13/93 20

### Page 25

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
Kit (Part) Number Name
ROLT
(weeks)
Unit Price thru
Oct 22/93
65C34688-35 Intercostal Web 23 $63.20
65C34688-36 Intercostal Top Chord 16 $70.00
65C34688-37 Intercostal Top Chord 15 $70.00
69-51452-7 Intercostal Web 54 $71.70
Prices shown as "No Charge" change to "Charge" after the Unit Price date.
The kits and the parts are subject to the terms and conditions of the Boeing standard purchase order
acknowledgment. After the Unit Price date, new price (and ROLT ) data is applicable. Prices are in
United States Dollars. Terms: Net 30 days.
Send purchase orders and letters about the supply data to the Director of Spares and refer to this
service bulletin number.
H. Special Tools - Price and Availability
None
I. Weight and Balance
NOTE: The table below gives the weight and balance data for one (1) channel location. Add the
weight and balance data for all the channel locations to get the total weight and balance data
for the airplane.
Jul 6/89 737-53-1120
REV 1: May 13/93 21

### Page 26

BOEING SERVICE BULLETIN 737-53-1120
Weight and Balance for One Channel Location
Airplane
Group
Changes Made at A Channel
Location
Change in
Weight
(Pounds)
Change in
Moment
(Pound-Inches)Kit Installed Figure Where
Changes are
Shown
+(-) +(-)
1, 2, 3, 7, 8
65C34688-2
25 +0.2(f), (g) +104(h), (i)65C34688-3
65C34688-2
installed with
65C34688-27
28, 47
+0.8
(f), (g)
+416
(h), (i)65C34688-2installed with
65C34688-4
and
65C34688-25 (c)
65C34688-26 (c) 46 0 0
1(a) 65C34688-8 (d) 19, 20 +0.2 +104
3 (b) 65C35994-3 55, 56 0 0
1, 2 (b) 65C35994-1 53, 54 0 0
2, 3 (a) 65C34688-9 (d) 19, 21 +1.0 +520
4, 5, 6
65C34978-23
27 +0.5 +26065C34978-2installed with
65C34978-24 (c)
65C34978-23
installed with
65C34978-22 (e)
41
+1.1 +57265C34978-2installed with
65C34978-24 (c)
and
65C34978-22 (e)
41, 48
4 (a) 65C34978-6 (d) 19, 20 +0.2 +104
4, 5 (b) 65C35994-2 57 0 0
5, 6 (a) 65C34978-7 (d) 19, 21 +1.0 +520
6 (b) 65C35994-4 58 0 0
(a) Installation is at Left or Right Buttock Line 24.75 only.
(b) Installation is at Right Buttock Line 45.50 only.
(c) This is a supplemental kit.
(d) The kit has all the parts necessary for installation at both locations.
Jul 6/89 737-53-1120
REV 1: May 13/93 22

### Page 27

BOEING SERVICE BULLETIN 737-53-1120
(e) The 65C34978-22 Repair Subkit has a different subkit for each location :
- 65C34978-31 Repair Subkit at Right BL 45.50.
- 65C34978-32 Repair Subkit at Right BL 24.75.
- 65C34978-33 Repair Subkit at Left BL 24.75.
- 65C34978-34 Repair Subkit at Left BL 45.50.
(f) Add +0.2 Pounds to the value shown in the table if it is necessary to install a Channel Assembly
"A", "B", or "C" because the Channel 69-77845-3 cannot be installed.
(g) Add +0.1 Pounds to the value shown in the table if it is necessary to install a Channel Radius Filler
"A" in the Channel 69-77845-3.
(h) Add +104 Pound-Inches to the value shown in the table if it is necessary to install a Channel
Assembly "A", "B", or "C" because the Channel 69-77845-3 cannot be installed.
(i) Add +52 Pound-Inches to the value shown in the table if it is necessary to install a Channel Radius
Filler "A" in the Channel 69-77845-3.
J. References
1. Existing Data:
a. Engineering Change Memo PRR34556, PRR35012R, PRR34990-R, MRR3539-649
b. 737-100/200 Maintenance Manual Subjects :
25-22-0, 25-27-100, 25-52-111, 53-21-00.
c. 737-300/400/500 Maintenance Manual Subjects :
25-22-0, 25-27-15, 53-21-00.
d. 737 -100/200 Structural Repair Manual Subjects :
51-30-5, 51-30-8, 51-30-4, 51-30-1, 51-30-2 51-30-3, 51-10-6, 51-20-4, 51-30-2,
51-10-2, 51-20-4, 51-40-2, 51-70.
e. 737 -300/400/500 Structural Repair Manual Subjects :
51-40-05, 51-40-08, 51-40-04, 51-40-01, 51-40-02, 51-40-03, 51-10-02, 51-20-01,
51-20-05, 51-40-02, 51-30-03, 51-70-13.
f. 737 Nondestructive Test Manual Part 6 Subject 51-00-00, Figure 1, 4, 11, and 16
g. 737-140 Structural Item Interim Advisory
h. Boeing Standard Overhaul Practices Manual :
20-50-01, 20-30-03, 20-50-12, 20-41-02, 20-43-03, 20-60-02, 20-50-10, 20-43-01.
Jul 6/89 737-53-1120
REV 1: May 13/93 23

### Page 28

BOEING SERVICE BULLETIN 737-53-1120
2. Data supplied with this service bulletin:
None
3. Installation Drawings:
Drawing Number Title
65C34688 Pivot Link Instl - Sta 520, Top Kit
65C34978 Pivot Link Instl - Sta 520, Top Kit
65-54906 Beam Instl- Cargo Floor
Sta 500 thru 520
65-46803 Beam Instl- Passenger Floor
Sta 500 and 520
65-49714 Wire Provisions Instl - Raceway E and F
Cargo Compartment
65-46814 Seat Track and Floor Stabilizer Instl -
Section 43
65-54966 Seat Track and Floor Stabilizer Instl -
Section 43
65-45410 Floor Beam Instl - Wing Center Section
65-67140 Floor Beam Instl - Wing Center Section,
Cargo
69-51452 Shear Web Instl - Floor Stabilizer,
BL 24.75 and 45.50, Sta 500B - 520
65-49631 Bulkhead Instl - Rear Wall Fwd Cargo
Compartment
65-52962 Shroud Closure Instl - Auxiliary Heat,
Fwd Cargo, Compartment
69-77845 Channel - Link Support, Floor Beam,
Sta 520
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the changes specified, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Changed
Publication Chapter-Section
737 Illustrated Parts Catalog 25-52, 53-10, 57-10
L. Electrical Load Data
Not changed
Jul 6/89 737-53-1120
REV 1: May 13/93 24

### Page 29

BOEING SERVICE BULLETIN 737-53-1120
II. MATERIAL INFORMATION
A. Parts Necessary For Each Airplane
1. Parts And Materials Supplied by Boeing
NOTE: To get the kits and the intercostal parts supplied by Boeing, refer to Paragraph I.G.,
Material - Price and Availability
a. Locations Where the Kits Can Be Installed (marked with an "X") :
65C34688-24 Floor Beam Top Kit
Airplane
Group Subkit SubkitName
Buttock Line (BL) Location On The Floor Beam
Left BL
45.50
Left BL
24.75 BL 0.00 Right BL24.75 Right BL45.50
1,2,3,7,8
65C34688-2 Channel X X - X X
65C34688-3 Channel - - X - -
65C34688-27 Repair X X - X X
65C34978-25 Floor Beam Top Kit
Airplane
Group
Subkit Subkit
Name
Buttock Line (BL) Location On The Floor Beam
Left BL
45.50
Left BL
24.75
Right BL
24.75
Right BL
45.50
4, 5, 6
65C34978-23 Channel X X X X
65C34978-22
(a)
Repair (e) (d) (c) (b)
Cargo Post Kits
Airplane
Group
Top Kit Buttock Line (BL) Location On The Floor Beam
Left BL
45.50
Left BL
24.75
BL 0.00 Right BL
24.75
Right BL
45.50
1 65C34688- 8 - X - X -
2 and 3 65C34688- 9 - X - X -
4 65C34978-6 - X - X -
5 and 6 65C34978-7 - X - X -
Jul 6/89 737-53-1120
REV 1: May 13/93 25

### Page 30

BOEING SERVICE BULLETIN 737-53-1120
Electrical Bracket Kits
Airplane
Group
Top Kit Buttock Line (BL) Location On The Floor Beam
Left BL
45.50
Left BL
24.75
BL 0.00 Right BL
24.75
Right BL
45.50
1 and 2 65C35994-1 - - - - X
3 65C35994-3 - - - - X
4 and 5 65C35994-2 - - - - X
6 65C35994-4 - - - - X
(a) The 65C34978-22 Repair Subkit has a different subkit for each location.
(b) Install the 65C34978-31 Repair Subkit at Right BL 45.50.
(c) Install the 65C34978-32 Repair Subkit at Right BL 24.75.
(d) Install the 65C34978-33 Repair Subkit at Left BL 24.75.
(e) Install the 65C34978-34 Repair Subkit at Left BL 45.50.
b. Obsolete and Supplemental Kits :
Group 1, 2, 3, 4, 5, 6, 7,8 Airplanes
Airplane Group Obsolete Kit Supplemental Kits New Kit
1, 2, 3, 7, 8
65C34688-1
(Not Installed)
Three 65C34688-27
Together
With One
65C34688-25
65C34688-24
(a)
65C34688-4
(Not Installed)
(b)
65C34688-25
(b) 65C34688-27
65C34688-4
(Installed) 65C34688-26 None
4, 5, 6
65C34978-1
(c) 65C34978-28 65C34978-25(d)
65C34978-3
(c) None 65C34978-22
65C34978-2 65C34978-24 65C34978-23
(a) The new 65C34688-24 Top Kit has four 65C34688-27 Repair Subkits. Only One
65C34688-4 Repair Subkit was given in the 65C34688-1 Floor Beam Top Kit.
(b) Keep the 69-77942-1 Repair Angle, ten (10) Hi - Loks BACB30VT6K3 and nine (9)
BACC30BL6 Collars from the 65C34688-4 Repair Subkit. These parts, together with a
65C34688-25 Supplemental Kit, are equivalent to a 65C34688-27 Repair Subkit.
(c) Discard the 65C34978-3 Repair Subkit. The 65C34978-3 Repair Subkit is in the
65C34978-1kit.
Jul 6/89 737-53-1120
REV 1: May 13/93 26

### Page 31

BOEING SERVICE BULLETIN 737-53-1120
(d) The new Floor Beam Top Kit 65C34978-25 contains four Repair Subkits. Only one repair
subkit was given in the 65C34978-1 Floor Beam Top Kit.
c. Kits Necessary if No Preventive Change or Repair was done by the Initial Release to the
Airplane ( No pivot links were installed on the airplane) :
Airplane Group
Kits Necessary For Each Airplane
Alternative #1 Alternative # 2(b)
Floor Beam Top
Kit
Cargo Post Top
Kit (a)
Electrical
Bracket Top Kit Collector Kit
1
65C34688-24
65C34688-8
65C35994-1
65C27712-1
65C27712-265C34688-9
65C35994-3
2
3
4
65C34978-25
65C34978-6
65C35994-2
65C34978-26
65C34978-2765C34978-7
65C35994-4
5
6
7, 8 65C34688-24 None None None
(a) One Cargo post top kit contains all the parts necessary to change the cargo posts at both
Left and Right Buttock Line 24.75.
(b) All the changes shown in this service bulletin can be made at all locations on the floor beam
with this collector kit.
d. Kits Necessary for the Channel Locations Repaired by the Initial Release ( A channel with a
pivot link was installed on one repair angle) :
Airplane Group
Kits Necessary For Each Channel Location
With A Repair Angle
Floor Beam Top Kit Electrical Bracket Top Kit
1
65C34688-26
If no more cracks are found in
the floor beam
or
65C34688-27
If more cracks are found in the
floor beam
65C35994-1 if cracks are
found in the channel
65C35994-3 if cracks are
found in the channel
None
2, 3
7, 8
4, 5, 6
65C34978-24 together with
one of the repair subkits in the
65C34978-22 Kit
None
Jul 6/89 737-53-1120
REV 1: May 13/93 27

### Page 32

BOEING SERVICE BULLETIN 737-53-1120
e. Kits Necessary for the Channel Locations That had a Preventive Change Done by the Initial
Release (A channel with a pivot link was installed)
Airplane Group
Kits Necessary For Each Channel Location
With A Pivot Link
Floor Beam Top Kit Electrical Bracket Top Kit
1, 2
65C34688-27 if cracks are
found in the floor beam
65C35994-1 if cracks are
found in the channel
65C35994-3 if cracks are
found in the channel3
4, 5, 6 None
None
7, 8 65C34688-27 if cracks arefound in the floor beam
f. Replacement Parts for Cracked Intercostal Webs or Cracked IntercostalTop Chords:
NOTES:
1. The parts shown below can be supplied by the operator. Refer to Paragraph II.A.2., Parts
and Materials Supplied by the Operator.
2. A new intercostal web is not necessary if the cracks can be repaired with the steps shown
in the 737-100/200 Structural Repair Manual Subject 51-40-2 or the 737-300/400
Structural Repair Manual Subject 51-70-13.
3. On Group 4, 5, 6 Airplanes, the intercostal top chord that is available from Boeing Spares
has pilot holes. Boeing recommends that the operator make the replacement for this part.
Refer to Paragraph II.A.2., Parts and Materials Supplied by the Operator, for the list of
materials necessary to make this part.
Airplane Group Part Number Name
1, 2, 3
(a)
65C34688-33 Intercostal Web
65C34688-34 Intercostal TopChord
7, 8
(b)
65C34688-35 Intercostal Web
65C34688-36 (c)
or
65C34688-37 (d)
Intercostal Top
Chord
4, 5, 6 69-51452-7 Intercostal Web
(a) Does not include :
PA099, PA001-PA015, PA231-PA232, PA016-PA022 and PC001-PC005
(b) Includes :
PA099, PA001-PA015, PA231-PA232, PA016-PA022, PC001-PC005
(c) On Group 8 Airplanes at Left or Right Buttock Line 45.50.
Jul 6/89 737-53-1120
REV 1: May 13/93 28

### Page 33

BOEING SERVICE BULLETIN 737-53-1120
(d) On Group 7 Airplanes and on PA099, PA001-PA015, PA231-PA232, PA016-PA022,
PC001-PC005 Airplanes at Left or Right Buttock Line 24.75 or 45.50 and on Group 8
Airplanes at Left or Right Buttock Line 24.75.
Jul 6/89 737-53-1120
REV 1: May 13/93 29

### Page 34

BOEING SERVICE BULLETIN 737-53-1120
g. List of Kits for Group 1, 2, 3, 7, 8 Airplanes
COLLECTOR KITS
65C27712 "Collector - Top Kit, Sta 520 Retrofit"
-2 -1
Quantity Part Number Name
. - 65C27712-1 Collector Kit - Group 1 Airplanes
- . 65C27712-2 (a) Collector Kit - Group 2 and 3 Airplanes
1 1 65C34688-24 Floor Beam Top Kit
. 1 65C34688-8 Cargo Post Top Kit - "I" Section
1 . 65C34688-9 Cargo Post Top Kit - "Hat" Section
1 1 65C35994-1 Electrical Bracket Top Kit
1 . 65C35994-3 Electrical Bracket, Top Kit - With Clip
(a) Only one of the two electrical bracket top kits in this collector kit is used
on each airplane. Discard the kit parts not used or keep the kit parts
for spares.
FLOOR BEAM TOP KIT
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
-3 -2 -27 -24
Quantity Part Number Name
. . . - 65C34688-24 Floor Beam Top Kit
. . - 4 65C34688-27 (b) Repair Subkit
. - . 4 65C34688-2 (a) Channel Subkit - Outboard
- . . 1 65C34688-3 (a) Channel Subkit - BL 0.00
. 1 . . 65C34688-5 Channel-Pivot Link
Assembly-Outboard
1 . . . 65C34688-6 Channel-Pivot Link Assembly -
BL 0.00
. . 1 . 65C34688-28 Intercostal Angle
. . 1 . 66-13222-10 Channel Radius Filler
. . 2 . 66-13222-9 Flange Radius Filler
. . 1 . 69-77942-1 Aft Repair Angle
. . 1 . 69-77942-2 Forward Repair Angle
1 1 . . AN960C516 Washer
1 1 . . BACB28AK05-128 Plain Bushing
2 2 . . BACB28AT07B010C Flanged Bushing
. . 3 . BACB30MY6K3Y Hi - Lok
9 9 . . BACB30MY6K5Y Hi - Lok
. . 5 . BACB30MY6K6X Hi - Lok
. . 5 . BACB30MY6K8X Hi - Lok
1 1 . . BACB30NR5DK21 Pivot Bolt
Jul 6/89 737-53-1120
REV 1: May 13/93 30

### Page 35

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
FLOOR BEAM TOP KIT
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
-3 -2 -27 -24
. . 3 . BACB30NX6K10X Hi - Lok
. . 4 . BACB30NX6K4 Hi - Lok
. . 3 . BACB30NX6K5X Hi - Lok
5 5 . . BACB30NX6K8X Hi - Lok
. . 3 . BACB30NX6K9X Hi - Lok
. . 2 . BACB30NY10K11 Hi - Lok
. . 9 . BACB30NY6K4 Hi - Lok
. . 5 . BACB30NY6K8X Hi - Lok
. . 2 . BACB30NY8K11 Hi - Lok
. . 6 . BACB30VT6K2 Hi - Lok
. . 10 . BACB30VT6K3 Hi - Lok
. . 3 . BACB30VT6K4 Hi - Lok
. . 15 . BACB30VT6K5 Hi - Lok
. . 9 . BACC30BH6 Collar
. . 34 . BACC30BL6 Collar
. . 10 . BACC30M6 Collar
9 9 3 . BACC30R6 Collar
. . 2 . BACC30X10 Collar
5 5 27 . BACC30X6 Collar
. . 2 . BACC30X8 Collar
1 1 . . BACN10JD5CD Nut
. . 3 . BACN10YD6 Nut
. . 3 . BACS12GM3-15 Screw
. . 2 . BACS40R007D030F Shim
1 1 . . MS24665-134 Pin
(a) Use the Hi -Loks and collars supplied with the repair subkit to attach the channel to the
repair angle. Discard the fasteners that are not used or keep them for spares.
(b) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
SUPPLEMENTAL KIT
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
- 65C34688-25 (a) Supplemental Kit
1 65C34688-28 Intercostal Angle
1 66-13222-10 Channel Radius Filler
2 66-13222-9 Flange Radius Filler
Jul 6/89 737-53-1120
REV 1: May 13/93 31

### Page 36

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
SUPPLEMENTAL KIT
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
1 69-77942-2 Forward Repair Angle
3 BACB30MY6K3Y Hi - Lok
5 BACB30MY6K6X Hi - Lok
5 BACB30MY6K8X Hi - Lok
3 BACB30NX6K10X Hi - Lok
4 BACB30NX6K4 Hi - Lok
3 BACB30NX6K5X Hi - Lok
3 BACB30NX6K9X Hi - Lok
2 BACB30NY10K11 Hi - Lok
9 BACB30NY6K4 Hi - Lok
5 BACB30NY6K8X Hi - Lok
2 BACB30NY8K11 Hi - Lok
6 BACB30VT6K2 Hi - Lok
3 BACB30VT6K4 Hi - Lok
15 BACB30VT6K5 Hi - Lok
9 BACC30BH6 Collar
15 BACC30BL6 Collar
10 BACC30M6 Collar
2 BACC30X10 Collar
19 BACC30X6 Collar
2 BACC30X8 Collar
3 BACN10YD6 Nut
3 BACS12GM3-15 Screw
2 BACS40R007D030F Shim
(a) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
SUPPLEMENTAL KIT
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
- 65C34688-26 (a) Supplemental Kit
1 66-13222-10 Channel Radius Filler
1 66-13222-9 Flange Radius Filler
3 BACB30NX6K9Y Hi-Lok
2 BACB30NY10K11 Hi - Lok
3 BACB30NY6K8Y Hi - Lok
6 BACC30AC6 Collar
Jul 6/89 737-53-1120
REV 1: May 13/93 32

### Page 37

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
SUPPLEMENTAL KIT
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
2 BACC30X10 Collar
(a) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
CARGO POST TOP KITS
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
-17 -16 -11 -10 -9 -8
Quantity Part Number Name
.....- 65C34688-8 (a) Cargo Post Top Kit - "I" Section
....-. 65C34688-9 (a) Cargo Post Top Kit - "Hat" Section
. . . - . 1 65C34688-10 Cargo Post Subkit - LBL 24.75
. . - . . 1 65C34688-11 Cargo Post Subkit - RBL 24.75
. - . . 1 . 65C34688-16 Cargo Post Subkit - LBL 24.75
- . . . 1 . 65C34688-17 Cargo Post Subkit - RBL 24.75
.... 2 2 65C34688-20 Wide Filler
.... 2 2 65C34688-21 Radius Filler
.... 2 2 65C34688-22 Narrow Filler
2 2 .... 65C34688-23 Shim
.... 2 2 65C35842-1 Attach Bracket
. . 1 1 . . 65C35842-2 Post End - "I" Section
1 1 .... 65C35842-3 Post End - "Hat" Section
.... 8 8 AN960JD416L Washer
7 7 .... BACB30FM6-17 Hi-Lok
. . 6 6 . . BACB30FM6-6 Hi-Lok
.... 6 6 BACB30MB8-8 Hi-Lok
.... 2 2 BACB30MD6-8 Hi-Lok
.... 2 2 BACC30AC6 Collar
7766 . . BACC30M6 Collar
.... 6 6 BACC30X8 Collar
.... 2 2 MS20392-3C79 Pin
.... 2 2 MS24665-132 Pin, Cotter
.... 4 . NAS43DD4-24 Spacer
..... 4 NAS43DD4-45 Spacer
.... 4 4 NAS549E416 Washer
(a) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
Jul 6/89 737-53-1120
REV 1: May 13/93 33

### Page 38

BOEING SERVICE BULLETIN 737-53-1120
CHANNEL-PIVOT LINK ASSEMBLY
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
-6 -5
Quantity Part Number Name
. - 65C34688-5 Channel-Pivot Link Assembly
- . 65C34688-6 Channel-Pivot Link Assembly, BL 0.00
1 1 65C34622-3 Pivot Link
1 1 69-77845-3 Channel
1 1 AN960C516 Washer
1 1 BACB28AK05-170 Plain Bushing
2 2 BACB28AT07B009C Flanged Bushing
1 1 BACB30NR5DK28 Pivot Bolt
1 1 BACN10JD5CD Nut
1 1 MS24665-134 Pin
Jul 6/89 737-53-1120
REV 1: May 13/93 34

### Page 39

BOEING SERVICE BULLETIN 737-53-1120
h. List of Kits for Group 4, 5, 6 Airplanes
COLLECTOR KITS
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-27 -26
Quantity Part Number Name
. - 65C34978-26 Collector Kit - Group 4 Airplanes
- . 65C34978-27 (a) Collector Kit - Group 5 and 6 Airplanes
. 1 65C34978-6 Cargo Post Top Kit - "I" Section
1 . 65C34978-7 Cargo Post Top Kit - "Hat" Section
1 1 65C34978-25 Floor Beam Top Kit
1 1 65C35994-2 Electrical Bracket Top Kit
1 . 65C35994-4 Electrical Bracket Top Kit - With Clip
(a) Only one of the electrical bracket top kits in this collector kit is used on
each airplane. Discard the kit parts not used or keep the kit parts for
spares.
FLOOR BEAM TOP KIT
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-25 -23 -22
Quantity Part Number Name
- . . 65C34978-25 Floor Beam Top Kit
1 . - 65C34978-22 Repair Subkit
4 - . 65C34978-23 (a) Channel Subkit
. . 1 65C34978-31 (b) Repair Subkit - RBL 45.50
. . 1 65C34978-32 (b) Repair Subkit - RBL 24.75
. . 1 65C34978-33 (b) Repair Subkit - LBL 24.75
. . 1 65C34978-34 (b) Repair Subkit - LBL 45.50
. 1 . 65C34978-4 Channel-Pivot Link Assembly
. 2 . 65C34978-47 Channel Radius Filler
. 1 . AN960C516 Washer
. 1 . BACB28AK05-147 Plain Bushing
. 2 . BACB28AT07B018C Flanged Bushing
. 7 . BACB30MY6K6Y Hi-Lok
. 3 . BACB30MY8K6Y Hi-Lok
. 1 . BACB30NR5DK25 Pivot Bolt
. 5 . BACB30NX8K8X Hi-Lok
. 7 . BACC30R6 Collar
. 3 . BACC30R8 Collar
. 5 . BACC30X8 Collar
. 1 . BACN10JD5CD Nut
. 1 . MS24665-134 Pin
Jul 6/89 737-53-1120
REV 1: May 13/93 35

### Page 40

BOEING SERVICE BULLETIN 737-53-1120
(a) Use the Hi -Loks and collars supplied with the repair subkit to attach the channel to the
repair angle. Discard the fasteners that are not used or keep them for spares.
(b) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
REPAIR SUBKIT
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-34 -33 -32 -31 -22
Quantity Part Number Name
....- 65C34978-22 Repair Subkit
. . . - 1 65C34978-31 Repair Subkit - RBL 45.50
. . - . 1 65C34978-32 Repair Subkit - RBL 24.75
. - . . 1 65C34978-33 Repair Subkit - LBL 24.75
- . . . 1 65C34978-34 Repair Subkit - LBL 45.50
. . . 1 . 65C34978-35 Aft Flange Filler
. . . 1 . 65C34978-36 Forward Flange Filler
. 1 1 . . 65C34978-37 Aft Flange Filler
. 1 1 . . 65C34978-38 Forward Flange Filler
1 .... 65C34978-41 Aft Flange Filler
1 .... 65C34978-42 Forward Flange Filler
2111 . 65C34978-43 Pulley Filler
1 .... 65C34978-44 Web Filler
. 1 . . . 65C34978-45 Web Filler
. . 1 . . 65C34978-46 Web Filler
1222 . 65C34978-48 Seat Track Filler
1 . . 1 . 65C34978-49 (a) Intercostal Channel
. 1 1 . . 65C34978-50 (b) Intercostal Channel
1 .... 69-77969-10 Aft Repair Angle - LBL 45.50
. . . 1 . 69-77969-3 Forward Repair Angle - RBL 45.50
. . . 1 . 69-77969-4 Aft Repair Angle - RBL 45.50
. . 1 . . 69-77969-5 Forward Repair Angle - RBL 24.75
. . 1 . . 69-77969-6 Aft Repair Angle - RBL 24.75
. 1 . . . 69-77969-7 Forward Repair Angle - LBL 24.75
. 1 . . . 69-77969-8 Aft Repair Angle - LBL 24.75
1 .... 69-77969-9 Forward Repair Angle - LBL 45.50
2222 . BACB30MY6K3Y Hi-Lok
1 . . 1 . BACB30MY6K4 Hi-Lok
14 1 1 17 . BACB30MY6K5 Hi-Lok
3 .... BACB30MY6K5Y Hi-Lok
2 14 13 . . BACB30MY6K6 Hi-Lok
. 2 2 . . BACB30MY6K6Y Hi-Lok
. . . 6 . BACB30MY6K8Y Hi-Lok
6 6 6 . . BACB30MY6K9Y Hi-Lok
Jul 6/89 737-53-1120
REV 1: May 13/93 36

### Page 41

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
REPAIR SUBKIT
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-34 -33 -32 -31 -22
. 1 1 . . BACB30MY8K6Y Hi-Lok
. . . 2 . BACB30MY8K8Y Hi-Lok
2 2 2 . . BACB30MY8K9Y Hi-Lok
1 .... BACB30NW6K12Y Hi-Lok
2 .... BACB30NW6K5Y Hi-Lok
. . . 2 . BACB30NX8K10X Hi-Lok
2 2 2 . . BACB30NX8K11X Hi-Lok
. . . 2 . BACB30NX8K8X Hi-Lok
2 2 2 . . BACB30NX8K9X Hi-Lok
2 . . 2 . BACB30NY8K12X Hi-Lok
. 2 2 . . BACB30NY8K13X Hi-Lok
1 . . 2 . BACB30VU6K15 Hi-Lok
. 2 2 . . BACB30VU6K16 Hi-Lok
3 . . 5 . BACB30VU6K4 Hi-Lok
5995 . BACB30VU6K5 Hi-Lok
2 . . 4 . BACB30VU6K8 Hi-Lok
. 2 2 . . BACB30VU6K9 Hi-Lok
11 13 13 14 . BACC30BL6 Collar
17 17 14 18 . BACC30M6 Collar
12 8 8 6 . BACC30R6 Collar
2332 . BACC30R8 Collar
6666 . BACC30X8 Collar
2222 . BACN10KE3D Nut Plate
2 2 2 . . BACR15AD7D10 Rivet
4 4 4 . . BACR15BA3D4 Rivet
. 4 4 . . BACR15BA3D6 Rivet
5555 . BACR15BB6D6 Rivet
4444 . BACR15CE3D4 Rivet
. . . 4 . BACR15CE3D6 Rivet
. 1 1 . . BACS12GP3K12 Screw
2112 . BACS12GP3K14 Screw
1222 . BACS40R009D010F Shim, Laminated
(a) Some kits are supplied with the Intercostal Channel 69-33135-4. The Intercostal Channel
69-33135-4 can be used as an alternative to the Intercostal Channel 65C34978-49. The
Intercostal Channel 69-33135-4 is made with pilot holes.
Jul 6/89 737-53-1120
REV 1: May 13/93 37

### Page 42

BOEING SERVICE BULLETIN 737-53-1120
i. Some kits are supplied with the Intercostal Channel 69-33135-6. The Intercostal Channel
69-33135-6 can be used as an alternative to the Intercostal Channel 65C34978-50. The
Intercostal Channel 69-33135-6 is made with pilot holes.
SUPPLEMENTAL KIT
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
- 65C34978-28 Supplemental Kit
1 65C34978-22 Repair Subkit
4 65C34978-24 Supplemental Subkit
SUPPLEMENTAL SUBKIT
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
- 65C34978-24 Supplemental Subkit
2 65C34978-47 Channel Radius Filler
1 BACB28AK05-147 Plain Bushing
2 BACB28AT07B018C Flanged Bushing
7 BACB30MY6K6Y Hi-Lok
3 BACB30MY8K6Y Hi-Lok
1 BACB30NR5DK25 Pivot Bolt
5 BACB30NX8K8X Hi-Lok
CARGO POST TOP KITS
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-9 -8 -15 -14 -7 -6
Quantity Part Number Name
.....- 65C34978-6 (a) Cargo Post Top Kit - "I" Section
....-. 65C34978-7 (a) Cargo Post Top Kit - "Hat" Section
. . . - 1 . 65C34978-14 Cargo Post Subkit - LBL 24.75
. . - . 1 . 65C34978-15 Cargo Post Subkit - RBL 24.75
. - . . . 1 65C34978-8 Cargo Post Subkit - LBL 24.75
-.... 1 65C34978-9 Cargo Post Subkit - RBL 24.75
.... 2 2 65C34978-18 Wide Filler
.... 2 2 65C34978-19 Filler, Radius
.... 2 2 65C34978-20 Narrow Filler
. . 2 2 . . 65C34978-21 Shim
.... 2 2 65C35842-1 Attach Bracket
1 1 .... 65C35842-2 Post End - "I" Section
. . 1 1 . . 65C35842-3 Post End- "Hat" Section
.... 8 8 AN960JD416L Washer
. . 7 7 . . BACB30FM6-17 Hi-Lok
6 6 .... BACB30FM6-6 Hi-Lok
Jul 6/89 737-53-1120
REV 1: May 13/93 38

### Page 43

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
CARGO POST TOP KITS
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-9 -8 -15 -14 -7 -6
.... 6 6 BACB30MB8-10 Hi-Lok
.... 2 2 BACB30MD6-10 Hi-Lok
.... 2 2 BACC30AC6 Collar
6677 . . BACC30M6 Collar
.... 6 6 BACC30X8 Collar
..... 1 0 BACR15AD7D8 Rivet
.... 6 . BACR15BA6D7 Rivet
.... 2 2 MS20392-3C79 Pin
.... 2 2 MS24665-132 Pin,Cotter
.... 4 . NAS43DD4-24 Spacer
..... 4 NAS43DD4-45 Spacer
.... 4 4 NAS549E416 Washer
(a) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
CHANNEL-PIVOT LINK ASSEMBLY
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
- 65C34978-4 Channel-Pivot Link Assembly
1 65C34622-3 Pivot Link
1 69-77976-1 Channel
1 AN960C516 Washer
2 AN960C716L Washer
1 BACB28AK05-231 Plain Bushing
2 BACB28AT07B034C Flanged Bushing
1 BACB30NF5D37 (a) Pivot Bolt
1 BACN10JD5CD Nut
1 MS24665-134 Pin
(a) Some kits are supplied with a Pivot Bolt BACB30NR5DK37. The Pivot Bolt
BACB30NR5DK37 is an alternative to the Pivot Bolt BACB30NF5D37.
Jul 6/89 737-53-1120
REV 1: May 13/93 39

### Page 44

BOEING SERVICE BULLETIN 737-53-1120
j. Electrical Bracket Top Kits For Group 1, 2, 3, 4, 5, 6 Airplanes
ELECTRICAL BRACKET TOP KITS
65C35994 "Bracket Instl - Wire Instl Support Sta 520, RBL 45.50 Top Kit"
-4 -3 -2 -1
Quantity Part Number Name
. . . - 65C35994-1 (a) Electrical Bracket Top Kit
. . - . 65C35994-2 (a) Electrical Bracket Top Kit
. - . . 65C35994-3 (a) Electrical Bracket Top Kit - With Clip
- . . . 65C35994-4 (a) Electrical Bracket Top Kit - With Clip
1 1 . . 65C35994-5 Support Clip
1 1 . . AN960PD10 Washer
2 2 . . BACN10JC3 Nut
. . 2 2 BACN10YD1 Nut-Clip
2222 BACR15BB6D7 Rivet
2222 NAS1801-3-7 Screw
(a) The kit has more fasteners than are necessary for installation. Discard the fasteners that
are not used or keep them for spares.
Jul 6/89 737-53-1120
REV 1: May 13/93 40

### Page 45

BOEING SERVICE BULLETIN 737-53-1120
k. List of Obsolete Kits
NOTE: 65C34688-1, 65C34688-4, 65C34978-1, 65C34978-2 and 65C34978-3, were available
for the initial release of this service bulletin. These kits are not available for revision 1.
65C34688 "Pivot Link Instl - STA 520, Top Kit"
Quantity Part Number Name
- 65C34688-1 Top Kit
4 65C34688-2 Kit Instl - Outboard
1 65C34688-3 Kit Instl-BL 0.00
1 65C34688-4 Kit Instl - Repair
65C34688 "Pivot Link Instl - Sta 520, Top Kit"
Quantity Part Number Name
- 65C34688-4 Kit Instl-Repair
1 69-77942-1 Angle
9 BACB30MY6K6Y Hi-Lok
5 BACB30NX6K8X Hi-Lok
3 BACB30NY6K5X Hi-Lok
2 BACB30NY8K8X Hi-Lok
16 BACB30VT6K3 Hi-Lok
3 BACB30VU6K4 Hi-Lok
19 BACC30BL6 Collar
9 BACC30R6 Collar
8 BACC30X6 Collar
2 BACC30X8 Collar
65C34978 "Pivot Link Instl - Sta 520, Top Kit"
-3 -2 -1
Quantity Part Number Name
. . - 65C34978-1 Kit Instl
. - 4 65C34978-2 Kit Instl-Link
- . 1 65C34978-3 Kit Instl-Repair
. 1 . 65C34978-4 Link Assy
1 . . 69-77969-1 Angle
. 1 . AN960C516 Washer
. 1 . BACB28AK05-128 Bushing
. 2 . BACB28AT07B010C Bushing
6 . . BACB30MY6K5Y Hi-Lok
7 7 . BACB30MY6K7Y Hi-Lok
3 3 . BACB30MY8K7Y Hi-Lok
. 1 . BACB30NR5DK21 Bolt
5 . . BACB30NX8K11X Hi-Lok
Jul 6/89 737-53-1120
REV 1: May 13/93 41

### Page 46

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
. 5 . BACB30NX8K9X Hi-Lok
2 . . BACB30NY8K9X Hi-Lok
16 . . BACB30VT6K5 Hi-Lok
5 . . BACB30VU6K5 Hi-Lok
5 . . BACC30BL6 Collar
16 . . BACC30BL6 Collar
6 7 . BACC30R6 Collar
7 . . BACC30R6 Collar
3 3 . BACC30R8 Collar
2 5 . BACC30X8 Collar
5 . . BACC30X8 Collar
. 1 . BACN10JD5CD Nut
2 . . BACR15CE6D3 Rivet
. 1 . MS24665-134 Pin
Jul 6/89 737-53-1120
REV 1: May 13/93 42

### Page 47

BOEING SERVICE BULLETIN 737-53-1120
2. Parts and Materials Supplied by the Operator
a. Parts and Materials : All Airplanes
Airplane Group
Maximum
Quantity
for each Airplane
Part Number
(Specification) Name
1, 2, 3 400 inch No. 212HD(3.00 inch wide) Permacel Tape(a)
4, 5, 6
8 BACB30FP6-3 Hex Drive Bolt
8 BACC30M6 Collar
112 MS20470D5-5
Rivet20 MS20470D5-6
56 MS20470D5-7
760 inch No. 212HD(3.00 inch wide) Permacel Tape(a)
1, 2, 3, 4, 5, 6
4 MS20426D6-8
Rivet
8 MS20426D5-7
4 MS20427M5-7
4 BACR15BA5D7
2 BACR15BB5D6
2 BACR15BB6D10
16 BACR15BB6D9
1 0.04 X 2.5 X 0.90(QQ-A-250/13) 7075-T6 cladaluminum sheet
2 MS24665-132 Cotter Pin
1 NAS43DD3-5FC Spacer Sleeve
1, 2, 3, 4, 5, 6, 7, 8 5 MS24665-134 Cotter Pin
Jul 6/89 737-53-1120
REV 1: May 13/93 43

### Page 48

BOEING SERVICE BULLETIN 737-53-1120
b. Materials : All Airplanes
Specification Name
Maximum
Surface Area
Covered on
each Airplane
(Square-Feet)
(*)
Vendor Information
Notes737 StructuralRepair
Manual
Subject
(SRM)
Boeing
Standard
Overhaul
Practice
Manual
MIL-G-23827 Grease 1.0 - - -
BMS 3-23 CorrosionInhibitor 7.0
-300/400/500
SRM
51-30-03
"Corrosion
Inhibitors"
or
-300/400/500
SRM
51-20-01
- (p)
(Alodine 1200S)
MIL-C-5541
Chemical
Film
Treatment
9.0
-100/200
SRM
51-20-3
"Protective
Coatings"
or
-300/400/500
SRM
51-30-03
"Materials For
Protective
Treatment"
- (n)
-
20-41-02
"Mixing
Instructions"
-
(o)
BMS 10-11,
Type I Primer
BMS 10-11,
Type II Enamel
BMS 5-95, Class
B-1/2, -2 or -4
Faying
Surface
Salient
2.0 -
20-50-12
"Materials -
Adhesives,
Type 93"
-
(*) Use the values shown in this column to calculate the quantity of material
necessary.
Jul 6/89 737-53-1120
REV 1: May 13/93 44

### Page 49

BOEING SERVICE BULLETIN 737-53-1120
c. Also Supply these Parts and Materials if the Channel Locations on Group 4, 5, 6 Airplanes were
Repaired by the Initial Release ( A channel with a pivot link was installed on one repair angle) :
Maximum
Quantity for
each Airplane
Part Number
(Specification) Name
2 BACB30MA6-5
3/64 Oversize
Hex Drive Bolt
4 BACB30MA6-6
24 BACB30MA6-9
8 BACB30MA8-9
8 BACB30MD8-11
Hex Drive Bolt
8 BACB30MD8-9
17 BACB30FP6-5
12 BACB30FP6-6
4 BACB30FQ6-9
4 BACB30FQ6-8
2 BACB30FQ6-4
6 BACB30FQ6-5
2 BACB30FN6-6
47 BACC30M6
Collar
16 BACC30AC8
30 BACC30Y6
8 BACC30Y8
d. Parts : For each Intercostal Web or Top Chord that is Cracked :
Airplane
Group Part Number Name
Clad Aluminum Sheet
for the Part Fasteners
Dimensions Specifications
1, 2, 3
(l)
65C34688-33 Web 0.025 X 5.75X 17.75 2024-T3(QQ-A-250/5)
(i)
65C34688-34 Top Chord 0.05 X 1.80X 17.75 7075-O(QQ-A-250/13)
7, 8
(m)
65C34688-35 Web 0.025 X 5.75X 19.63 2024-T3(QQ-A-250/5)
65C34688-36 Top Chord(j) 0.05 X 2.00X 19.63 7075-O(QQ-A-250/13)
65C34688-37 Top Chord(k) 0.05 X 1.80X 19.63 7075-O(QQ-A-250/13)
Jul 6/89 737-53-1120
REV 1: May 13/93 45

### Page 50

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
Airplane
Group Part Number Name
Clad Aluminum Sheet
for the Part Fasteners
Dimensions Specifications
4, 5, 6
69-51452-7 Web 0.025 X6.13X 17.50 2024-T3(QQ-A-250/5) Included
in
2.aIntercostal
Top Chord "A"
Top Chord
"A"
0.05 X 1.71
X 17.50
7075-O
(QQ-A-250/13)
e. Parts and Materials : For Special Conditions on Group 1, 2, 3, 7, 8 Airplane
1. No Preventive Change or Repair was done at a Channel Location by the Initial Release ( No
pivot link was installed) :
Special Condition Parts And Material Information
The fastener heads in a
channel make contact with
the channel radius.
(*)
Refer to (b) for the list of parts and materials to use at
each channel location with this condition
The fastener heads in a
channel make contact with
the sides of the channel.
(*)
Refer to (c) for the list of parts and materials to use at
each channel location with this condition
(*) This condition is shown in Figure 25, View D-D and in Figure 28, View D-D.
2. The Channel Location was Repaired by the Initial Release ( A channel with a pivot link was
installed on one repair angle) :
Special Condition Parts And Material Information
The clearance is not sufficient
between a channel that was
installed as shown in the initial
release and the seat track fastener
that is installed in this Revision 1
Refer to (d) for the list of parts to use at each
channel location with this condition
Cracks are found in a channel
Refer to (d) and (e) for the list of parts and
materials to use at each channel location with
this condition
More cracks are found in the floor
beam adjacent to a channel
Refer to (f) for the list of parts to use at each
channel location with this condition
Cracks are found in the channel
and more cracks are found in the
floor beam adjacent to the channel
Refer to (e) and (f) for the list of parts and
materials to use at each channel location with
this condition
Jul 6/89 737-53-1120
REV 1: May 13/93 46

### Page 51

BOEING SERVICE BULLETIN 737-53-1120
3. The Channel Location had a Preventive Change Done by the Initial Release (A channel with
a pivot link was installed) :
Special Condition Parts And Material Information
Cracks are found in the Channel
Refer to (g) and (e)
for the list of parts to use at
each channel location with this
condition
Cracks are found in the floor beam adjacent to a
channel
Refer to (h)
for the list of parts to use at
each channel location with this
condition
(a) Permacel Division Johnson and Johnson.
US Highway No 1 PO Box 671, New Brunswick, New Jersey 08903
Vendor Code No. V99742.
(b) Get these parts and materials to make one (1) Channel Radius Filler "A" :
- One (1) BAC1511-1550 X 4.6 inch extrusion for the Channel Radius Filler "A" made from
2024-T3511 aluminum (QQ-A-200/3)
or
One (1) 0.16 X 4.6 X 1.5 inch sheet made from bare 2024-T3 aluminum (QQ-A-250/4)
- Eight (8) BACB30KK6-8 Hex Drive Bolts to install a channel without a repair angle
0r
Four (4) BACB30FP6-9 Hex Drive Bolts and (4) BACB30FP6-10 Hex Drive Bolts to install
a channel on a repair angle.
- Eight (8) BACC30R6 Collars to install a channel without a repair angle
0r
Eight (8) BACC30M6 Collars to install a channel on a repair angle.
(c) Get these parts and materials to make one (1) Channel Assembly "A", "B", or "C" :
Quantity for Each
Channel Assembly
Part Number
(Specification) Name
1
0.10 x 6.7 x 6.1
inch sheet of clad
7075-O aluminum
(QQ-A-250/13)
Material For Channel "A"
1
0.19 x 3.4 x 1.8
inch sheet of clad
7075-T6 aluminum
(QQ-A-250/13)
Material For Plate "A"
1 BACB28AT07B028C Flanged Bushing
1 BACB28AT07B009C Flanged Bushing
Jul 6/89 737-53-1120
REV 1: May 13/93 47

### Page 52

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
2
0.16 X 0.9 X 1.75
inch sheet of bare
2024-T3 aluminum
(QQ-A-250/4)
Material For Channel Radius
Filler "B" or "C"
4 BACR15BB6D9 Rivet
1 0.04 X 2.4 X 0.84 7075-T6 clad aluminum sheet(QQ-A-250/13)
2 BACR15BB6D10 Rivet
(d) Get these hex drive bolts and collars for each channel or channel assembly:
- Two (2) BACB30MD6-9
- Eight (8) BACB30MA6-6 (3/64 Oversize)
- Two (2) BACC30AC6
- Eight (8) BACC30Y6
(e) Get these parts and materials to make one (1) Channel Assembly "D" or "E" :
- One (1) 0.10 x 6.70 x 6.10 inch sheet of clad 7075-O aluminum sheet (QQ-A-250/13)
- Two (2) Flanged Bushing BACB28AT07B009C.
(f) Get these hex drive bolts and collars for each channel or channel assembly:
- Two (2) BACB30LY6-8
- Two (2) BACB30LX6-4
- Two (2) BACB30MD6-9
- Two (2) BACB30MD6-10
- Four (4) BACB30MA6-6 (3/64 Oversize)
- Four (4) BACB30MA6-8 (3/64 Oversize)
- Fourteen (14 ) BACB30FP6-5
- Six (6) BACC30AC6
- Eight (8) BACC30Y6
- Fourteen (14 ) BACC30M6
- Two (2) BACC30X6
(g) Get these hex drive bolts and collars for each channel assembly:
- Four (4) BACB30MD6-8
- Eight (8) BACB30MA6-5 (3/64 Oversize)
- Four (4) BACC30AC6
- Eight (8) BACC30Y6
Jul 6/89 737-53-1120
REV 1: May 13/93 48

### Page 53

BOEING SERVICE BULLETIN 737-53-1120
(h) Get these hex drive bolts and collars for each channel or channel assembly:
- Two (2) BACB30MD6-9
- Two (2) BACB30MD6-10
- Four (4) BACB30MA6-6 (3/64 Oversize)
- Four (4) BACB30MA6-8 (3/64 Oversize)
- Four (4) BACC30AC6
- Eight (8) BACC30Y6
(i) Get these rivets, hex drive bolts and collars :
- Sixteen (16) BACR15FT5D6
- Thirty Seven (37) BACR15FT5D4
- Two (2) BACB30FP6-3
- Two (2) BACC30M6
(j) Use on Group 8 Airplanes only at Left or Right Buttock Line 45.50.
(k) Use on Group 7 and on PA099, PA001-PA015, PA231-PA232, PA016-PA022, PC001-PC005
Airplanes at Left or Right Buttock Line 24.75 or 45.50 and on Group 8 Airplanes at Left or Right
Buttock Line 24.75.
(l) Does not include :
PA099, PA001-PA015, PA231-PA232, PA016-PA022 and PC001-PC005
(m) Includes :
PA099, PA001-PA015, PA231-PA232, PA016-PA022, PC001-PC005
(n) Refer to the Boeing Standard Overhaul Practice Manual 20-43-01 for information on the
chromic acid anodize procedure, which is an alternative to the chemical film treatment operation.
(o) The application of an enamel layer is an alternative step.
(p) There was no vendor information for this material in the 737-100/200 Structural Repair Manual
at the time that this service bulletin was released.
Jul 6/89 737-53-1120
REV 1: May 13/93 49

### Page 54

BOEING SERVICE BULLETIN 737-53-1120
B. Parts Necessary to Change Spares
None
C. Special Tools and Equipment
None
D. Existing Parts Accountability
The parts shown below are changed by this service bulletin. Quantity is the number of parts changed
at each channel location.
Existing Part
Number
RUC Name Quantity New Part Number PNC RC
69-51476-1 DIS Channel Assembly 1 65C34978-4 S A
69-51476-2 Channel Assembly 1 65C34978-4
66-23250-1 Channel 1 65C34688-6
66-22187-1 Channel 1 65C34688-5
69-33135-4 Channel Stiffener 1 65C34978-49 (c)
69-33135-6 Channel Stiffener 1 65C34978-50 (c)
69-51475-3 Channel Filler 2 65C34978-47
65-46803-9 Channel Filler 1 66-13222-10 (c)
65-46803-7 Tee 1 65C34688-28
Intercostal Angle (c)
65-67140-24 RWK Intercostal Link 1 65C34978-29
or
65C34978-30 (c)
R A
65-45410-77
65-45410-78
65-45410-123
65-45410-330
65-45410-365
65-45410-396
65-45410-579
RWK Intercostal Link 1 65C34688-30
or
65C34688-29 (c)
R A
65-49631-9 (a)
65-49631-10 (a)
65-49631-502 (a)
65-49631-501 (a)
65-49631-9 (a)
65-49631-10 (a)
65-49631-502 (a)
65-49631-501(a)
65-77435-2 (a)
65-77435-1 (a)
65-77435-2 (a)
65-77435-1 (a)
RWK Cargo Post 1 65C34688-13
65C34688-12
65C34688-14
65C34688-15
65C34978-11
65C34978-10
65C34978-12
65C34978-13
65C34688-18
65C34688-19
65C34978-16
65C34978-17
R A
65-49714-8 (b) RWK
(d)
Support Clip 1 Support Clip "A" (e), (f) N A
65-49714-8 (b) DIS
(d)
Support Clip 1 Support Clip "B" (e)
Support Clip "C" (f)
N A
Jul 6/89 737-53-1120
REV 1: May 13/93 50

### Page 55

BOEING SERVICE BULLETIN 737-53-1120
(Continued)
Existing Part
Number
RUC Name Quantity New Part Number PNC RC
65-49714-33 (b) DIS Support Clip 1 65C35994-5 S A
65-49714-12 (b) RWK Electrical Bracket 1 65C35994-6 R A
65-49714-32 (b)
65-49714-36 (b)
RWK Electrical Bracket 1 65C35994-8 R A
(a) Existing at Left or Right Buttock Line 24.75 only.
(b) Existing at Right Buttock Line 45.50 only.
(c) For the repair only.
(d) RWK or DIS the Support Clip 65-49714-8.
(e) Change the Support Clip 65-49714-8 or make a Support Clip "B". The Support Clip 65-49714-8
with changes becomes Support Clip "A".
(f) Use Support Clip "C" if Channel Assembly "B" is installed as shown in this revision 1.
(g) Use if the fastener heads in a channel make contact with the sides of the channel. This condition
is shown in Figure 25 and 28.
RUC Recommended Use Code
DIS - Discard the part.
RWK - Make the change as specified in this service bulletin.
PNC Part Number Code
N - There is no equivalent Boeing part number for the changed part. Show on the part
that this service bulletin has been done.
R - This is the part number after the change.
S - This is the new equivalent or replacement part number.
RC Replacement Code
A - Replacement not permitted. Do not replace a new part with an existing part.
B - Removed part. No replacement.
Jul 6/89 737-53-1120
REV 1: May 13/93 51

### Page 56

BOEING SERVICE BULLETIN 737-53-1120
BLANK PAGE
Jul 6/89 737-53-1120
REV 1: May 13/93 52

### Page 57

BOEING SERVICE BULLETIN 737-53-1120
III. ACCOMPLISHMENT INSTRUCTIONS
NOTES:
1. The paragraphs identified with letters give the general work instructions. The instructions identified
with numbers on the figures give the recommended sequence of steps.
2. In this service bulletin :
- Edge margin is the distance from the center of a fastener hole in a part to the edge of the part
- Edge distance is the distance from the edge of a fastener hole in a part to the edge of the part.
3. Unless specified differently, these dimensions and tolerances are used:
- All linear dimensions are in inches
- Tolerance on linear dimensions other than rivet and bolt edge margin is plus or minus 0.03 inch
- Angular tolerance is plus or minus 2 degrees
- Tolerance on rivet and bolt edge margin or edge distance is plus or minus 0.05 inch
- Fastener hole dimensions are found in the 737 Structural Repair Manual Chapter 51
- The torque limits for nuts and bolts are found in the 737 Structural Repair Manual Chapter 51.
4. Refer to the 737 Structural Repair Manual Subject 51-30-1, 51-30-3 (737-100/200) and 51-40-01,
51-40-03 (737-300/400/500) for information on alternative fasteners.
5. Unless specified differently, restore all bare aluminum surfaces, except fastener holes, with the
same finish as on the adjacent surface.
6. Refer to the "Substitute Sealants" figure in the 737 Structural Repair Manual, Subjects 51-20-4
(737-100/200) and 51-20-05 (737-300/400/500) for a list of alternative sealants.
7. Refer to the 737 Structural Repair Manual "Safety Procedures" for working with chemicals, Subject
51-10-6 (737-100/200), 51-10-02 (737-300/400/500). Also obey all warnings and cautions in
these and all other manual subjects and numbers specified in this service bulletin :
- Solvent cleaning steps Boeing Standard Overhaul Practices Manual 20-30-03.
- Chemical film treatment 737 Structural Repair Manual Subject 51-10-2 (737-100/200),
51-20-01 (737-300/400/500) and Boeing Standard Overhaul
Practices Manual 20-43-03
- Chromic acid anodize Boeing Standard Overhaul Practices Manual 20-43-01.
- Repair sealing 737 Structural Repair Manual Subject 51-20-4 (737-100/200),
51-20-05 (737-300/400/500) and Boeing Standard Overhaul
Practices Manual 20-50-12.
- Application of primers Refer to the Boeing Standard Overhaul Practices Manual
and paints 20-41-02.
8. Remove initial layers of corrosion inhibiting compound (BMS 3-23 or equivalent) from surfaces that
are fay sealed (Refer to the 737-100/200 Structural Repair Manual Subject 51-10-2 or to the
737-300/400 Structural Repair Manual Subject 51-20-01).
9. Remove initial layers of sealant from surfaces that are fay sealed.
Jul 6/89 737-53-1120
REV 1: May 13/93 53

### Page 58

BOEING SERVICE BULLETIN 737-53-1120
10. On Group 1, 2, 3, 4, 5, 6, 7, 8 Airplanes (all airplane groups) use the table below. It tells you which
part of the work instructions are necessary for each channel location.
Work Instructions
for Each Channel Location
Airplane
Group
Work Done To the Channel Location By
The Initial Release Work Instructions
1, 2, 3, 4, 5,
6, 7, 8
No preventive change or repair was
made
at the channel location
(no pivot link was installed)
See Figure 1 for the work
instruction alternatives
1, 2, 3, 7, 8 A repair was made at the
channel location
(a channel with a pivot link was installed
on one repair angle)
Inspect the adjacent intercostal
and make changes to the
repair installation as shown in
Part III
Inspect the adjacent intercostal
and replace the repair angle
with two repair angles as
shown in
Part IV
4, 5, 6
1, 2, 3, 7, 8 A preventive change was made
at the channel location
(a channel with a pivot link was
installed)
See Figure 2 for the work
instruction alternatives
No more work is necessary as
shown in this service bulletin
at that channel location
4, 5, 6
Jul 6/89 737-53-1120
REV 1: May 13/93 54

### Page 59

BOEING SERVICE BULLETIN 737-53-1120
Part I: Inspection - No Pivot Link was Installed on :
Group 1, 2, 3, 7, 8 Airplanes At Left or Right Buttock Line 24.75 or 45.50 or
Buttock Line 0.00
or
Group 4, 5, 6, Airplanes At Left or Right Buttock Line 24.75 or 45.50
NOTES:
1. Do this part if no changes were made to the channel location by the initial release.
2. No repair instructions are given in this service bulletin at Buttock Line 0.00.
A. (not shown) Gain access through the air conditioning distribution bay to the aft side of the floor
beam. This can be done through the forward cargo compartment if the rear cargo wall is removed.
Keep the cargo wall and the fasteners.
B. Refer to Figure 3 to make an inspection for cracks in the channel and the aft side of the floor beam.
1. If no cracks are found in the floor beam, do the preventive change as shown in Part V or repeat
the inspection in this Part I (Figure 1 gives the repeat inspection interval).
2. Do Part V if cracks are found in the channel only.
3. If cracks are found in the floor beam only or in both the floor beam and the channel, do the
repair in Part VI (Refer to the note above if floor beam cracks are found at Buttock Line 0.00).
C. (not shown) Install the cargo wall if only the inspection was done.
Part II: Inspection and Changes - Pivot Link Was Installed on Group 1, 2, 3, 7, 8 Airplanes At Left or
Right Buttock Line 24.75 or 45.50, or Buttock Line 0.00
NOTE: Do this part if a preventive change was made at the channel location by the initial release.
A. (not shown) Gain access through the air conditioning distribution bay to the aft side of the floor
beam. This can be done through the forward cargo compartment if the rear cargo wall is removed.
Keep the cargo wall and the fasteners.
B. Refer to Figure 5 to make an inspection for cracks in the channel and on the aft side of the floor
beam.
C. Refer to Part VII if cracks are found in the channel only.
D. If cracks are found in the floor beam only or in both the floor beam and the channel, do the repair in
Part VIII.
NOTE: No repair instructions are given in this service bulletin at Buttock Line 0.00.
E. If no cracks are found in the channel or on the floor beam, make an inspection of the clearances
shown in Figure 5.
Jul 6/89 737-53-1120
REV 1: May 13/93 55

### Page 60

BOEING SERVICE BULLETIN 737-53-1120
F. If the clearance between the edge of the pivot bolt and the edge of the channel is the only
clearance that is not correct, make the changes to the channel as shown in Figure 5 to get the
correct clearance.
G. If the clearance between the seat track ends or if the clearance between the forward edge of the
intercostal link and the fastener heads is not correct, gain access to the work area from above the
passenger cabin floor :
1. (not shown) Remove the seats, carpets and floor panels necessary to gain this access. Refer
to the 737-100 and -200 Boeing Maintenance Manual Subjects 25-22-0, 25-27-100, and
53-21-00. Refer to the 737-300 and -400 Boeing Maintenance Manual Subjects 25-22-0,
25-27-15, and 53-21-00.
2. Do the steps in Figure 6 to get the correct clearances.
H. (not shown) Install the cargo wall in the forward cargo compartment, the floor panels, the carpets,
and the seats. Put the airplane back to the normal condition for operation.
Part III: Inspection and Changes - A Channel With A Pivot Link Was Installed on One Repair Angle
on Group 1, 2, 3, 7, 8 Airplanes At Left or Right Buttock Line 24.75
or 45.50
NOTE: Do this part if a repair was made at the channel location by the initial release.
A. (not shown) Gain access through the passenger cabin to the channel, the intercostal link, the
intercostal web, the top chord of the intercostal, and to the part of the floor beam where the work
will be done. Remove the seats, carpets and floor panels necessary to gain this access. Refer to
the 737-100 and -200 Boeing Maintenance Manual Subjects 25-22-0, 25-27-100, and 53-21-00.
Refer to the 737-300 and -400 Boeing Maintenance Manual Subjects 25-22-0, 25-27-15, and
53-21-00.
B. (not shown) On Group 1, 2, 3 Airplanes at Right Buttock Line 45.50, remove and keep the
electrical bracket and the fasteners that attach it to the support clip on the channel. Also remove
and keep the fasteners that attach the electrical bracket to the wing box structure.
C. Refer to Figure 17 to remove the intercostal link.
D. Refer to Figure 7 to make an inspection for cracks in the channel and in the floor beam. Look for
more cracks that started after the repair steps in the initial release of this service bulletin were
done.
E. (not shown) On Group 1 and 2 Airplanes with channels that were cracked at Right Buttock Line
45.50, remove the support clip from the channel and keep it. The support clip attaches the
electrical bracket to the channel.
F. (not shown) On Group 1, 2, 3 Airplanes at Left or Right Buttock Line 24.75, remove and keep the
cargo posts if cracks are found in the channel or if more cracks are found in the floor beam.
G. Refer to Figure 10 to make an inspection for cracks in the adjacent intercostal web and top
intercostal chord.
H. If no more cracks are found in the floor beam, make the changes to the aft repair angle as shown
in Figure 46.
Jul 6/89 737-53-1120
REV 1: May 13/93 56

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-53-1120/file/4f67bf80a29f.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
