# Boeing Special Attention Service Bulletin 737-53-1286: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0384; AD 2012-09-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-53-1286](https://openairdocs.org/service-documents/boeing/sb-737-53-1286.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin
- Pages: 127
- PDF: https://openairdocs.org/files/sha256/5d/83/5d83a488591dc89f5db3aff0e06e0386c8ee51c31f12456f27b816bab5cb50e1
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1286/file/5d83a488591d

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1286
Original Issue: November 20, 2008
Revision 1: December 14, 2009
ATA System: 5321 5342
SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot
Links, Seat Tracks and Floor Panels Replacement
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2008 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
1 of 127
4.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
2 of 127
BOEING SERVICE BULLETIN 737-53-1286
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 5
Summary ...................................................... 7
1. PLANNING INFORMATION ........................................ 1 1
A. Effectivity ............................................... 1 1
1. Airplanes ............................................ 1 1
2. Spares Affected ........................................ 1 2
B. Concurrent Requirements ...................................... 1 2
C. Reason ................................................ 1 2
D. Description .............................................. 1 3
E. Compliance .............................................. 1 3
F. Approval ............................................... 1 4
G. Manpower .............................................. 1 4
H. Weight and Balance Changes .................................... 1 5
I. Electrical Load Data ......................................... 1 5
J. References .............................................. 1 5
1. Existing Data .......................................... 1 5
2. Data supplied with this Service Bulletin ............................ 1 6
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 1 6
K. Publications Affected ........................................ 1 6
L. Interchangeability and Intermixability of Parts ........................... 1 6
2. MATERIAL INFORMATION ........................................ 1 7
A. Material - Price and Availability ................................... 1 7
B. Industry Support Information .................................... 1 7
C. Parts Necessary For Each Airplane ................................. 1 8
1. Kits/Parts ............................................ 1 8
2. Parts and Materials Supplied by the Operator ........................ 2 4
3. Parts Modified and Reidentified ................................ 2 5
4. Parts Removed and Not Replaced .............................. 2 5
D. Parts Necessary to Change Spares ................................. 2 5
E. Special Tooling - Price and Availability ............................... 2 5
F. Special Tooling Necessary to do this Service Bulletin ....................... 2 5
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 2 7
A. GENERAL INFORMATION ..................................... 2 7
B. WORK INSTRUCTIONS ....................................... 2 7
FIGURE 1: PASSENGER COMPARTMENT FLOOR PANELS ACROSS THE CABIN BETWEEN FRAME
STA 500C AND STA 540 - REMOVAL ............................ 3 0
FIGURE 2: SEAT TRACKS BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD, LEFT
OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL .... 3 2
FIGURE 3: SEAT TRACK PIVOT LINKS BETWEEN STA 520 AND STA 537.45 AT THE LEFT INBOARD,
LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL . 35
FIGURE 4: SEAT TRACK PIVOT LINK CHANNELS AFT OF FLOOR BEAM AT STA 520 AT THE LEFT
INBOARD, LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION -
REMOVAL ........................................... 3 7
FIGURE 5: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
LEFT OUTBOARD POSITION - INSTALLATION ....................... 3 9
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
3 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 4

FIGURE 6: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION
- MODIFICATION FOR LATER INSTALLATION ....................... 4 2
FIGURE 7: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT
OUTBOARD POSITION - PREPARATION FOR LATER INSTALLATION ......... 4 6
FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD
POSITION - INSTALLATION ................................. 5 0
FIGURE 9: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD
POSITION - INSTALLATION ................................. 5 6
FIGURE 10: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
LEFT INBOARD POSITION - INSTALLATION ........................ 6 0
FIGURE 11: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT INBOARD POSITION -
MODIFICATION FOR LATER INSTALLATION ........................ 6 3
FIGURE 12: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD
POSITION - PREPARATION FOR LATER INSTALLATION ................. 6 7
FIGURE 13: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD POSITION
- INSTALLATION ........................................ 7 1
FIGURE 14: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT AT THE LEFT INBOARD
POSITION - INSTALLATION ................................. 7 7
FIGURE 15: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
RIGHT INBOARD POSITION - INSTALLATION ....................... 8 1
FIGURE 16: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE RIGHT INBOARD POSITION -
MODIFICATION FOR LATER INSTALLATION ........................ 8 4
FIGURE 17: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT INBOARD
POSITION - PREPARATION FOR LATER INSTALLATION ................. 8 8
FIGURE 18: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT INBOARD
POSITION - INSTALLATION ................................. 9 2
FIGURE 19: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT AT THE RIGHT INBOARD
POSITION - INSTALLATION ................................. 9 8
FIGURE 20: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
RIGHT OUTBOARD POSITION - INSTALLATION ..................... 1 0 2
FIGURE 21: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE RIGHT OUTBOARD POSITION
- MODIFICATION FOR LATER INSTALLATION ...................... 1 0 5
FIGURE 22: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT
OUTBOARD POSITION - PREPARATION FOR LATER INSTALLATION ......... 1 0 9
FIGURE 23: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE RIGHT OUTBOARD
POSITION - INSTALLATION ................................. 1 1 3
FIGURE 24: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT AT THE RIGHT
OUTBOARD POSITION - INSTALLATION ......................... 1 2 0
FIGURE 25: PASSENGER COMPARTMENT FLOOR PANELS ACROSS THE CABIN BETWEEN FRAME
STA 500C AND STA 540 - INSTALLATION ......................... 1 2 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
4 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-53-1286Original Issue: November 20, 2008
Revision 1: December 14, 2009
ATA System: 5321 5342
SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot
Links, Seat Tracks and Floor Panels Replacement
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
No more work is necessary on airplanes changed in accordance with the original issue of this service bulletin.
REASON FOR REVISION
As a part of a service bulletin validation program, this change was completed on airplane YM221 by Service
Bulletin 737-53-1286 Original Issue before the release of Revision 1 of this service bulletin. The change completed
on airplane YM221 by Service Bulletin 737-53-1286 Original Issue is equivalent to the release of Revision 1 of
this service bulletin. Airplane YM221 has the configuration of a Group 1 airplane.
This revision is sent to inform operators of changes made as a result of recommendations from service bulletin
validation.
These sections were changed:
1. Paragraph 1.K.2., Damage Tolerance Based Structural Inspections paragraph is added.
2. Paragraph 2.A., Material - Price and Availability: Top kit and supplemental kit price and availability is added.
3. Paragraph 2.C., Parts Necessary For Each Airplane: A new replacement Top kit and a supplemental kit is
added.
4. FIGURE 2: A new note is added to make sure radius fillers are removed.
5. FIGURE 5, 10, 15 and 20: The fastener code is updated.
6. FIGURE 6, 7, 8, 11, 12, 13, 16, 17, 18, 21, 22 and 23: U configuration parts have been changed into Y
configuration parts.
7. FIGURE 7, 8, 12, 13, 17, 18, 22 and 23: The splice angle fastener pattern is updated.
8. FIGURE 7, 12, 17 and 22: A new note is added to the step table for correct fastener spacing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
5 of 127

### Page 6

9. FIGURE 8, 13, 18 and 23: The forward direction arrow and the fastener code F fastener is updated.
10. FIGURE 13 and 18: Fastener code G quantity is updated.
11. FIGURE 25: A step to install two plugs and drill new holes is added. Also the floor panel fastener length is
updated.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity, to show the location
of important changes.
Pages with no vertical lines have no important changes.
REVISION HISTORY
November 20, 2008Original Issue:
December 14, 2009Revision 1:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
6 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 7

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-53-1286Original Issue: November 20, 2008
Revision 1: December 14, 2009
ATA System: 5321 5342
SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot
Links, Seat Tracks and Floor Panels Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will prevent the passenger seat leg shear plunger from being installed
across the seat track pivot joint at approximately STA 521. If the work given in this service bulletin is not done
and a passenger seat leg shear plunger is installed across a pivot joint, the structural integrity of the seat track
and seat track pivot link assembly will be reduced and this could lead to the subsequent failure of the passenger
seat mounting and possible passenger injury.
It has been observed that in the current configuration of the affected airplanes, the passenger seat leg shear
plunger is installed across the seat track pivot joint at approximately STA 521. The existing passenger seat track
and pivot link design was not intended to carry seat leg plunger point loads at this location. The noncompliance
is to FAR/JAR 25-561 emergency landing conditions, especially the 9G forward condition.
This service bulletin gives instructions to move the seat track pivot point approximately 2 inches aft to allow the
passenger seat leg plunger to be installed onto the seat track at STA 521.45. The existing aft seat leg fittings
span the STA 521.45 Stay-Out Zone. The Stay-Out Zone defines the flex area of the aircraft while in flight and
defines fatigue loading of the aircraft structure. Accomplishment of this service bulletin will ensure that the
passenger seat leg shear plunger is not installed across the pivot joint and restore the 9G forward loading
condition in the areas around Body Station 520.
This service bulletin is related to Service Bulletin 737-25-1596. Service Bulletin 737-25-1596 gives instructions
to change the passenger seat configuration after accomplishment of the structural changes given in this service
bulletin.
Boeing Service Related Problem (SRP) 737NG-SRP-25-0272 is related to this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
7 of 127

### Page 8

ACTION (PRR 38740)
Get access to the passenger cabin. Remove the passenger seats, seat track covers, passenger floor carpets
and passenger floor panels across the cabin between STA 500C and STA 540. Remove the existing seat track
pivot link assemblies. Cut the seat track at STA 500C + 9.25 and remove the section of the track from the cut
point to STA 520. Install new seat track pivot link assemblies and new seat track sections. Install 5 new passenger
floor panels. Install the remaining floor panels and equipment that was removed for access.
EFFECTIVITY
737-700 Airplanes. Refer to Paragraph 1.A., Effectivity for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Boeing recommends that the change given in this service bulletin be done within 72 months after the original
issue date of this service bulletin.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of May 9, 2007. Please refer to Paragraph
2.B., Industry Support Information.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
8 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 9 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
540
STA STA
500 520
STA  REMOVE AND INSTALL NEW
360  PIVOT LINK ASSEMBLIES AND
PIVOT LINK CHANELS. INSTALL
NEW FLOOR PANELS AT STA 520
- STA 540
RBL
SEE  45.5
RBL
- 24.75
LBL
24.75
LBL
45.5
STA
540
STA
520
CUT AND REMOVE AFT
SECTION OF SEAT TRACKS.  STA
INSTALL NEW SEAT TRACKS  500D
AND SPLICE TO EXISTING  STA
SEAT TRACKS.  FWDE  500C
AFTER PASSENGER FLOOR
PANEL REMOVAL
1520702
Original Issue: November 20, 2008
Revision 1: December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  9 of 127

### Page 10

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
10 of 127
BOEING SERVICE BULLETIN 737-53-1286
BLANK PAGE

### Page 11

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1286
Original Issue: November 20, 2008
Revision 1: December 14, 2009
ATA System: 5321 5342
SUBJECT: FUSELAGE - Passenger Cabin Floors - Body Station 500C to 540 - Seat Track Pivot
Links, Seat Tracks and Floor Panels Replacement
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below. Refer to PRR 38740 for data about this
change.
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-700 Airplanes with a passenger seat configuration that could
result in a seat leg plunger being installed across a seat track pivot
link at the Section 43/44 interface.
-1
Airplane Models:
737-700
GroupVariable Number
1YB371 - YB392
1YM201 - YM223
1YM226 - YM230
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
11 of 127

### Page 12

2. Spares Affected
Examine your spares supply for the parts or components identified in Paragraph 2.C., Parts
Necessary for Each Airplane. If any parts or components are found, refer to Paragraph 2.C.1.,
Kits/Parts for the recommended use.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will prevent the passenger seat leg shear plunger from being
installed across the seat track pivot joint at approximately STA 521. If the work given in this service
bulletin is not done and a passenger seat leg shear plunger is installed across a pivot joint, the structural
integrity of the seat track and seat track pivot link assembly will be reduced and this could lead to the
subsequent failure of the passenger seat mounting and possible passenger injury.
It has been observed that in the current configuration of the affected airplanes, the passenger seat leg
shear plunger is installed across the seat track pivot joint at approximately STA 521. The existing
passenger seat track and pivot link design was not intended to carry seat leg plunger point loads at
this location. The noncompliance is to FAR/JAR 25-561 emergency landing conditions, especially the
9G forward condition.
This service bulletin gives instructions to move the seat track pivot point approximately 2 inches aft to
allow the passenger seat leg plunger to be installed onto the seat track at STA 521.45. The existing
aft seat leg fittings span the STA 521.45 Stay-Out Zone. The Stay-Out Zone defines the flex area of
the aircraft while in flight and defines fatigue loading of the aircraft structure. Accomplishment of this
service bulletin will ensure that the passenger seat leg shear plunger is not installed across the pivot
joint and restore the 9G forward loading condition in the areas around Body Station 520.
This service bulletin is related to Service Bulletin 737-25-1596. Service Bulletin 737-25-1596 gives
instructions to change the passenger seat configuration after accomplishment of the structural changes
given in this service bulletin.
Boeing Service Related Problem (SRP) 737NG-SRP-25-0272 is related to this service bulletin.
As a part of a service bulletin validation program, this change was completed on airplane YM221 by
Service Bulletin 737-53-1286 Original Issue before the release of Revision 1 of this service bulletin.
The change completed on airplane YM221 by Service Bulletin 737-53-1286 Original Issue is equivalent
to the release of Revision 1 of this service bulletin. Airplane YM221 has the configuration of a Group
1 airplane.
Revision 1 is sent to inform operators of changes made as a result of recommendations from service
bulletin validation.
These sections were changed:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
12 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 13

1. Paragraph 1.K.2., Damage Tolerance Based Structural Inspections paragraph is added.
2. Paragraph 2.A., Material - Price and Availability: Top kit and supplemental kit price and availability
is added.
3. Paragraph 2.C., Parts Necessary For Each Airplane: A new replacement Top kit and a supplemental
kit is added.
4. FIGURE 2: A new note is added to make sure radius fillers are removed.
5. FIGURE 5, 10, 15 and 20: The fastener code is updated.
6. FIGURE 6, 7, 8, 11, 12, 13, 16, 17, 18, 21, 22 and 23: U configuration parts have been changed
into Y configuration parts.
7. FIGURE 7, 8, 12, 13, 17, 18, 22 and 23: The splice angle fastener pattern is updated.
8. FIGURE 7, 12, 17 and 22: A new note is added to the step table for correct fastener spacing.
9. FIGURE 8, 13, 18 and 23: The forward direction arrow and the fastener code F fastener is updated.
10. FIGURE 13 and 18: Fastener code G quantity is updated.
11. FIGURE 25: A step to install two plugs and drill new holes is added. Also the floor panel fastener
length is updated.
D. Description
Get access to the passenger cabin. Remove the passenger seats, seat track covers, passenger floor
carpets and passenger floor panels across the cabin between STA 500C and STA 540. Remove the
existing seat track pivot link assemblies. Cut the seat track at STA 500C + 9.25 and remove the section
of the track from the cut point to STA 520. Install new seat track pivot link assemblies and new seat
track sections. Install 5 new passenger floor panels. Install the remaining floor panels and equipment
that was removed for access.
Revision 1 - No more work is necessary on airplanes changed in accordance with the original issue of
this service bulletin.
The work in this service bulletin is done in the maintenance zone(s) given below.
Affected Maintenance Zones
ZoneModel
231, 232737-700
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
13 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 14

Boeing recommends that the change given in this service bulletin be done within 72 months after the
original issue date of this service bulletin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this service bulletin for each
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with
operator task hour data if necessary. The estimate does not include lost time. These are some examples
of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Elapsed HoursTask HoursNumber of Per-
sons
Task
2.505.002Open Access
4.258.502Figure 1
3.256.502Figure 2
1.251.251Figure 3
2.502.501Figure 4
1.251.251Figure 5
2.302.301Figure 6
3.253.251Figure 7
2.054.102Figure 8
1.251.251Figure 9
1.251.251Figure 10
2.302.301Figure 11
3.253.251Figure 12
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
14 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 15

Elapsed HoursTask HoursNumber of Per-
sons
Task
2.054.102Figure 13
1.251.251Figure 14
1.251.251Figure 15
2.302.301Figure 16
3.253.251Figure 17
2.054.102Figure 18
1.251.251Figure 19
1.251.251Figure 20
2.302.301Figure 21
3.253.251Figure 22
2.054.102Figure 23
1.251.251Figure 24
7.0028.004Figure 25
2.505.002Close Access
63.65105.35TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data
a. Engineering Change Memo PRR 38740
b. Boeing Service Related Problem (SRP) 737NG-SRP-25-0272
c. Boeing Service Bulletin 737-25-1596 "EQUIPMENT/FURNISHINGS - Passenger Seat -
Arrange The Passenger Seat Configuration"
d. Standard Overhaul Practices Manual (SOPM) 20-41-02, 20-41-03, 20-41-04, 20-43-03,
20-50-01, 20-50-02, 20-50-11, 20-50-12, 20-50-19
e. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 25-22-00, 25-27-15
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
15 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 16

f. 737-700 Structural Repair Manual (SRM) 737-700 SRM 51-20-01, 51-20-05, 51-40-02,
51-40-05, 51-40-06, Chapter 51
g. Boeing Parts Standards Document D-590
h. Boeing Drawing 65-88700
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
SEAT TRACK INSTALLATION143A5300
PASSENGER FLOOR BEAM INSTALLATION - STA 520143A5521
FLOOR PANEL INSTALLATION - SECTION 43143A5800
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
Chapter-SectionPublication
53-30737 Structural Repair Manual
53-21, 53-42737 Illustrated Parts Catalog
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
16 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 17

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane as shown
below. Kits availability is shown in the Reorder Lead Time (ROLT). ROLT is calculated from the date
Boeing gets the purchase order.
As a part of a service bulletin validation program, this change was completed on airplane YM221 by
Service Bulletin 737-53-1286 Original Issue. As a result of the validation findings, Top Kit 002A0003-100
is replaced by a new Top Kit 002A0003-134.
Unit Price thru July
31, 2010
ROLT
(Weeks)
NameKit Number
$28,258.0092 WeeksReplacement Kit - Retrofit - Seat
Track Pivot Link - Replacement
002A0003-134
$319.0091 WeeksSupplemental Kit - Retrofit -
Seat Track Pivot Link - Replace-
ment
002A0003-136 (a)
(a) Supplemental kit 002A0003-136 plus Top kit 002A0003-100 is equivalent to new Top kit
002A0003-134.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
After the Unit Price date, new price and ROLT data is applicable. Prices are in United States dollars.
Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of the methods that follow:
1. Order on-line via ATA Spec 2000 or Boeing Part Page
2. Fax to (206) 662-7145
3. Mail to:
Spares Customer Support - MC 36-65
Boeing Spares Department
P.O. Box 3707
Seattle, Washington 98124-2207 USA
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of May 9, 2007. For task hour
reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Commercial
Airplanes Group - Warranties. The kits/parts for airplanes in warranty as of that date will be supplied
at no charge. Send a purchase order for the kits/parts to Boeing Spares. Please refer to this service
bulletin number and reference the airplane variable number(s) in your purchase order.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
17 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 18

C. Parts Necessary For Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
NOTE: One top kit and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by
the Operator, are necessary for each airplane. The Top Kit is divided into Figure kits for
each installation figure shown in the table below.
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Figure Kit
141310985Top Kit
111111002A0003-134
Figure Kit
242320191815Top Kit
111111002A0003-134
Figure Kit
25Top Kit
1002A0003-134
ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
141310985
QTY
SPLICE ANGLE1143A5310-125
SPLICE ANGLE1143A5310-126
SPLICE ANGLE1143A5310-127
SPLICE ANGLE143A5310-128
RADIUS STRAP11143A5310-129
RADIUS STRAP11143A5310-130
SPLICE ANGLE1143A5310-131
SPLICE ANGLE143A5310-132
FLAT STRAP11143A5310-133
SEAT TRACK1143A5310Y121
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
18 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 19

ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
141310985
QTY
SEAT TRACK143A5310Y122
SEAT TRACK1143A5310Y123
SEAT TRACK143A5310Y124
TRACK ASSY11143A5595-39
CHANNEL ASSY11143A5595U36
TAPE143A5800-3
FLOOR PANEL
ASSY
143A5810-533
FLOOR PANEL
ASSY
143A5810-534
FLOOR PANEL
ASSY
143A5810-535
FLOOR PANEL
ASSY
143A5810-536
RADIUS FILLER11149A5510-356
BOLT22BACB30NN4K12
BOLT22BACB30NN4K7
BOLT, HEX HEAD11BACB30NR5K31
BOLT66BACB30VF3K10
BOLT, FLUSH
HEAD
22BACB30VF3K3
BOLT22BACB30VF3K4
BOLT, PROTRUD-
ING HEAD
1717BACB30VT6K3
BOLT2020BACB30VT6K4
BOLT12141214BACB30VT6K5
BOLT44BACB30VT8K5
BOLT, 100 DEG
HEX DR
2522BACB30YP8K4
COLLAR49144914BACC30BL6
COLLAR425422BACC30BL8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
19 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 20

ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
141310985
QTY
FILLER, FLAT22BACF3F012R029NN
NUT1010BACN10YR3CD
NUT, CLIP-ONBACN11AL1
NUT, CLIP-ONBACN11AL2
NUT44BACN11Z4CD
FLOOR PANEL
SCREWS
BACS12GR3L16
NUTPLATE, TWO
LUG, ADHESIVE
BONDED
CB6009CR3-1P
WASHER1010NAS1149D0332J
WASHER44NAS1149D0463J
ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
242320191815
QTY
SPLICE ANGLE1143A5310-125
SPLICE ANGLE1143A5310-126
SPLICE ANGLE143A5310-127
SPLICE ANGLE1143A5310-128
RADIUS STRAP11143A5310-129
RADIUS STRAP11143A5310-130
SPLICE ANGLE143A5310-131
SPLICE ANGLE1143A5310-132
FLAT STRAP11143A5310-133
SEAT TRACK143A5310Y121
SEAT TRACK1143A5310Y122
SEAT TRACK143A5310Y123
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
20 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 21

ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
242320191815
QTY
SEAT TRACK1143A5310Y124
TRACK ASSY11143A5595-39
CHANNEL ASSY11143A5595U36
TAPE143A5800-3
FLOOR PANEL
ASSY
143A5810-533
FLOOR PANEL
ASSY
143A5810-534
FLOOR PANEL
ASSY
143A5810-535
FLOOR PANEL
ASSY
143A5810-536
RADIUS FILLER11149A5510-356
BOLT62BACB30NN4K12
BOLT62BACB30NN4K7
BOLT, HEX HEAD11BACB30NR5K31
BOLT126BACB30VF3K10
BOLT, FLUSH
HEAD
62BACB30VF3K3
BOLT62BACB30VF3K4
BOLT, PROTRUD-
ING HEAD
3117BACB30VT6K3
BOLT2020BACB30VT6K4
BOLT22141214BACB30VT6K5
BOLT44BACB30VT8K5
BOLT, 100 DEG
HEX DR
4125BACB30YP8K4
COLLAR63144914BACC30BL6
COLLAR425425BACC30BL8
FILLER, FLAT22BACF3F012R029NN
NUT1810BACN10YR3CD
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
21 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 22

ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
242320191815
QTY
NUT, CLIP-ONBACN11AL1
NUT, CLIP-ONBACN11AL2
NUT44BACN11Z4CD
FLOOR PANEL
SCREWS
BACS12GR3L16
NUTPLATE, TWO
LUG, ADHESIVE
BONDED
CB6009CR3-1P
WASHER1810NAS1149D0332J
WASHER234NAS1149D0463J
ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
25
QTY
SPLICE ANGLE143A5310-125
SPLICE ANGLE143A5310-126
SPLICE ANGLE143A5310-127
SPLICE ANGLE143A5310-128
RADIUS STRAP143A5310-129
RADIUS STRAP143A5310-130
SPLICE ANGLE143A5310-131
SPLICE ANGLE143A5310-132
FLAT STRAP143A5310-133
SEAT TRACK143A5310Y121
SEAT TRACK143A5310Y122
SEAT TRACK143A5310Y123
SEAT TRACK143A5310Y124
TRACK ASSY143A5595-39
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
22 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 23

ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
25
QTY
CHANNEL ASSY143A5595U36
TAPE1143A5800-3
FLOOR PANEL
ASSY
1143A5810-533
FLOOR PANEL
ASSY
2143A5810-534
FLOOR PANEL
ASSY
1143A5810-535
FLOOR PANEL
ASSY
1143A5810-536
RADIUS FILLER149A5510-356
BOLTBACB30NN4K12
BOLTBACB30NN4K7
BOLT, HEX HEADBACB30NR5K31
BOLTBACB30VF3K10
BOLT, FLUSH
HEAD
BACB30VF3K3
BOLTBACB30VF3K4
BOLT, PROTRUD-
ING HEAD
BACB30VT6K3
BOLTBACB30VT6K4
BOLTBACB30VT6K5
BOLTBACB30VT8K5
BOLT, 100 DEG
HEX DR
BACB30YP8K4
COLLARBACC30BL6
COLLARBACC30BL8
FILLER, FLATBACF3F012R029NN
NUTBACN10YR3CD
NUT, CLIP-ON60BACN11AL1
NUT, CLIP-ON60BACN11AL2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
23 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 24

ALL
KIT 002A0003-134
NOTES
Existing Part
NumberName
Figure
New Part Number
25
QTY
NUTBACN11Z4CD
FLOOR PANEL
SCREWS
260BACS12GR3L16
NUTPLATE, TWO
LUG, ADHESIVE
BONDED
5CB6009CR3-1P
WASHERNAS1149D0332J
WASHERNAS1149D0463J
KIT 002A0003-136
NotesNameQTYNew Part Number
BOLT, PROTRUD-
ING HEAD
82BACB30VT6K3
BOLT56BACB30VT6K5
COLLAR82BACC30BL6
FLOOR PANEL
SCREWS
260BACS12GR3L16
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number/ Specification
(b)CHEMICAL CONVERSION16 OzTYPE 2, CLASS A
(a) (c)PRIMER16 OzBMS10-11 TYPE I
(e)ALUMINIZED EPOXY PRIMER16 Oz463-6-4
(a) (d)SEALANT16 OzBMS 5-95, TYPE 1, CLASS B-
1/2 OR B-2
(a) (f)BONDING ADHESIVE16 OzBMS 5-44, CLASS B
(a) (g)CORROSION INHIBITING
COMPOUND
16 OzBMS 3-23
(a)TAPE5 ftBMS 8-283
(h)RIVET2BACR15CE8D( )
(BACR15GF8D( ) optional)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
24 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 25

NotesNameQTYPart Number/ Specification
(a) See the Qualified Products List at the end of the Boeing Materials Specification (BMS)
for supplier data.
(b) Refer to SOPM 20-43-03.
(c) Refer to SOPM 20-41-02.
(d) Refer to SOPM 20-50-19.
(e) Refer to SOPM 20-41-04.
(f) Refer to SOPM 20-50-12.
(g) Refer to SOPM 20-41-03.
(h) This part is required to plug the open fastener holes in the structure that do not match
the fastener holes in the new floor panel assemblies.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
Boeing can supply the tools shown in Paragraph 2.F., Special Tooling Necessary to do this Service
Bulletin. Send a Purchase Order to the Director of Spares. Give this service bulletin number and the
date the tools will be used. If there is a limit in the quantity of available rental tools, a supply sequence
is given by Spares.
Daily Price thru Dec
31/2008
NameTool Kit Number
$90.00Locating Jig Seat Track Installation - Section
43/44 floor integration.
MIT002A0018-1 (a)
(a) The special tool required to install the new pivot links will be supplied as a no charge loan.
F. Special Tooling Necessary to do this Service Bulletin
To get the tools shown below, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Maintenance and overhaul tools in the manuals shown in Paragraph 1.J., References, can also be
necessary. Examine operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
25 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 26

NameTool Kit Number
Locating Jig Seat Track Installa-
tion - Section 43/44 floor integra-
tion.
MIT002A0018-1 (a)
(a) The special tool required to install the new pivot
link will be supplied as a no charge loan.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
26 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 27

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets are given in 737-700 SRM Chapter
51.
– Torque limits to tighten nuts and bolts are given in 737-700 SRM Chapter 51.
4. For approved fastener and process material substitutions, refer to 737-700 SRM
Chapter 51. Alternate fasteners are given in 737-700 SRM Chapter 51 and Boeing
Drawing 65-88700.
5. If the length of any fastener specified in this service bulletin does not meet the
installation standards given in 737-700 SRM Chapter 51, then a fastener of the same
specification, or an approved substitute, with a length which meets the installation
standards given in 737-700 SRM Chapter 51 may be used.
6. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "as
given in" are included in the instruction, the procedure in the Boeing document must
be used.
B. WORK INSTRUCTIONS
1. PART 1 - PREPARATION AND ACCESS
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
27 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 28

a. Get access to the passenger cabin.
b. Remove the seat track covers between Station (STA) 500 and STA 540, refer to
737-600/700/800/900 AMM 25-27-15 as an accepted procedure.
c. Remove the passenger seats between STA 500 and STA 540, refer to 737-600/700/800/900
AMM 25-22-00 as an accepted procedure.
d. Remove the passenger compartment floor carpets as necessary between STA 500 and STA
540, refer to 737-600/700/800/900 AMM 25-27-15 as an accepted procedure.
2. PART 2 - MODIFICATION
a. Remove the passenger floor panels across the cabin between floor beams STA 500C and
STA 537.5 as given in FIGURE 1.
b. Remove the seat tracks the between floor beams STA 500C and STA 520 as given in FIGURE
2.
c. Remove the seat track pivot links between STA 520 and STA 537.5 as given in FIGURE 3.
d. Remove the seat track pivot link channels from the aft surface of the STA 520 floor beam as
given in FIGURE 4.
e. Install the seat track pivot link channel onto the aft surface of the STA 520 floor beam at the
left outboard position as given in FIGURE 5.
f. Install the seat track pivot link channel onto the aft surface of the STA 520 floor beam at the
left inboard position as given in FIGURE 10.
g. Install the seat track pivot link channel onto the aft surface of the STA 520 floor beam at the
right inboard position as given in FIGURE 15.
h. Install the seat track pivot link channel onto the aft surface of the STA 520 floor beam at the
right outboard position as given in FIGURE 20.
i. Modify the seat track at the left outboard position as given in FIGURE 6.
j. Modify the seat track at the left inboard position as given in FIGURE 11.
k. Modify the seat track at the right inboard position as given in FIGURE 16.
l. Modify the seat track at the right outboard position as given in FIGURE 21.
m. Prepare the seat track at the left outboard position for installation between the floor beams at
STA 500C and STA 520 as given in FIGURE 7.
n. Prepare the seat track at the left inboard position for installation between the floor beams at
STA 500C and STA 520 as given in FIGURE 12.
o. Prepare the seat track at the right inboard position for installation between the floor beams at
STA 500C and STA 520 as given in FIGURE 17.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
28 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 29

p. Prepare the seat track at the right outboard position for installation between the floor beams
at STA 500C and STA 520 as given in FIGURE 22.
q. Install the seat track at the left outboard position between the floor beams at STA 500C and
STA 520 as given in FIGURE 8.
r. Install the seat track at the left inboard position between the floor beams at STA 500C and
STA 520 as given in FIGURE 13.
s. Install the seat track at the right inboard position between the floor beams at STA 500C and
STA 520 as given in FIGURE 18.
t. Install the seat track at the right outboard position between the floor beams at STA 500C and
STA 520 as given in FIGURE 23.
u. Install the seat track pivot link between the floor beams at STA 520 and STA 537.5 at the left
outboard position as given in FIGURE 9.
v. Install the seat track pivot link between the floor beams at STA 520 and STA 537.5 at the left
inboard position as given in FIGURE 14.
w. Install the seat track pivot link between the floor beams at STA 520C and STA 537.5 at the
right inboard position as given in FIGURE 19.
x. Install the seat track pivot link between the floor beams at STA 520 and STA 537.5 at the right
outboard position as given in FIGURE 24.
y. Do a close up inspection and install the passenger floor panels across the cabin between the
floor beams STA 500C and STA 537.5 as given in FIGURE 25.
3. PART 3 - RESTORATION
a. Install the passenger compartment floor carpets as necessary between STA 500 and STA
540, refer to 737-600/700/800/900 AMM 25-27-15 as an accepted procedure.
b. Install the passenger seats between STA 500 and STA 540, refer to 737-600/700/800/900
AMM 25-22-00 as an accepted procedure.
c. Install the seat track covers between STA 500 and STA 540, refer to 737-600/700/800/900
AMM 25-27-15 as an accepted procedure.
NOTE: New seat track covers are installed if the passenger seat installation is being
reconfigured by other instruction.
d. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1: December 14, 2009
29 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 30 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
SEE  540
STA STA
500 520
STA
360
FWDE
STA
420
STA
537.45
FWD •
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 1: PASSENGER COMPARTMENT FLOOR PANELS ACROSS THE CABIN BETWEEN FRAME STA
500C AND STA 540 - REMOVAL
(SHEET 1 OF 2)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  30 of 127

### Page 31

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-51-FASTENERSRemove1
(a)2143A5810-107FLOOR PANEL ASSYRemove2
(a)2143A5810-108FLOOR PANEL ASSYRemove
(a)1143A5810-109FLOOR PANEL ASSYRemove
-209-FASTENERSRemove / Keep3
(a)1143A5810-63FLOOR PANEL ASSYRemove / Keep4
(a)1143A5810-119FLOOR PANEL ASSYRemove / Keep
(a)1143A5810-120FLOOR PANEL ASSYRemove / Keep
(a)1143A5810-121FLOOR PANEL ASSYRemove / Keep
(a)1143A5810-122FLOOR PANEL ASSYRemove / Keep
(a)1143A5810-123FLOOR PANEL ASSYRemove / Keep
(a) Refer to 737-600/700/800/900 AMM 25-22-00 as an accepted procedure.
FIGURE 1: PASSENGER COMPARTMENT FLOOR PANELS ACROSS THE CABIN BETWEEN FRAME STA
500C AND STA 540 - REMOVAL
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
31 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 32 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
540
STA STA
500 520
STA
360
SEE
RBL
45.5
RBL
24.75
LBL
24.75
LBL
45.5
VIS
520
STA
500D
STA
500C
STABILIZER
INTERCOSTAL
(4 LOCATIONS)
1521076
FIGURE 2: SEAT TRACKS BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD, LEFT
OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 1 OF 3)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  32 of 127

### Page 33 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
LBL 45.5
LBL 24.75
RBL 24.75
RBL 45.5
STA  9.9250  STA  STA
500C  INCHES  500D  520
B-B  B-B
A-A
4 LOCATIONS
STA  STA
500D  520
3) 17 LOCATIONS
STA  +++++.
500C
D-D
SEAT TRACK PIVOT
LINK (REFERENCE)
500D  STA  (5)  RADIUS  STA  520
FILLER
D-D  D-D
C-C
B-B  SEAT TRACK PIVOT  1521110
LINK CHANNEL
(REFERENCE)
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 2: SEAT TRACKS BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD, LEFT
OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 2 OF 3)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  33 of 127

### Page 34

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-4-SEAT TRACKMeasure1
-4-SEAT TRACKCut2
(a)68-FASTENERSRemove3
-40-FASTENERSRemove4
(d)4143A5310-48RADIUS FILLERRemove
-12143A5310-48RADIUS FILLERRemove / Keep5
(b)4-SEAT TRACK SEC-
TION
Remove6
(c)--SEAT TRACKChamfer7
(a) From the seat track lower webs and the stabilizer intercostals.
(b) Use approved non metallic tooling and scrapers to assist removal if necessary.
(c) Chamfer the upper cut edge of the the existing seat track to 45.0 deg. X 0.08.
(d) Make sure the radius fillers are removed. If not removed, they can cause fastener holes to be shifted
down when match drilling the new pivot link channel.
FIGURE 2: SEAT TRACKS BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT INBOARD, LEFT
OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
34 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 35 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA  STA
537.45  520  360
SEE  STA
540
• 00000000po
LBL
45.5
LBL
24.75
RBL
24.75
RBL
45.5
‚FWD
4 LOCATIONS  1521512
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 3: SEAT TRACK PIVOT LINKS BETWEEN STA 520 AND STA 537.45 AT THE LEFT INBOARD,
LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 1 OF 2)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  35 of 127

### Page 36

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
---FASTENERSRemove / Keep1
---FASTENERSRemove / Keep2
-4143A5595-27PIVOT LINK ASSY
STA520-540
Remove3
---FASTENERSRemove / Keep4
-4143A5595-30PIVOT LINK ASSY
STA520-540
Remove / Keep5
-4143A5595-31PIVOT LINK ASSY
STA520-540
Remove / Keep
FIGURE 3: SEAT TRACK PIVOT LINKS BETWEEN STA 520 AND STA 537.45 AT THE LEFT INBOARD,
LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
36 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 37 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA  STA
537.45  520  360
STA
38  540
100000d0odpo
LBL
45.5
LBL
24.75
RBL
24.75
RBL
45.5
RADIUS
FILLER (3)
• B  114 LOCATIONS  STA
520
+
+
+
+
SEAT TRACK
PIVOT LINK
• B  ) RADIUS  CHANNEL
FILLER
A-A  B-B  1521584
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 4: SEAT TRACK PIVOT LINK CHANNELS AFT OF FLOOR BEAM AT STA 520 AT THE LEFT
INBOARD, LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 1 OF 2)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  37 of 127

### Page 38

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-56-FASTENERSRemove1
(a)4149A5510-224RADIUS FILLERRemove2
(a)4149AA5510-10RADIUS FILLERRemove3
(a)4143A5595-8CHANNEL ASSYRemove4
(a) To assist removal use acceptable tooling that will not damage parts to assist removal.
FIGURE 4: SEAT TRACK PIVOT LINK CHANNELS AFT OF FLOOR BEAM AT STA 520 AT THE LEFT
INBOARD, LEFT OUTBOARD, RIGHT INBOARD AND RIGHT OUTBOARD POSITION - REMOVAL
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
38 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 39 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA  STA
537.45  520  360
STA
540
_A°  Pee ele  10 0000000odo0  - FWD
LBL
45.5
LBL
24.75
RBL
24.75
RBL
45.5
STA
• B
520
14 LOCATIONS
A6F ®
1345
• B  A-A  B—B  1521690
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 5: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
LEFT OUTBOARD POSITION - INSTALLATION
(SHEET 1 OF 3)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  39 of 127

### Page 40

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)1143A5595U36CHANNEL ASSYPut / Hold1
(c)14-HOLESDrill2
(d)-TYPE 2, CLASS ACHEMICAL CONVER-
SION
Apply3
(e)-BMS10-11 TYPE IPRIMERApply4
(f)1143A5595U36CHANNEL ASSYInstall (New)5
(a) Onto the aft web of the floor beam at STA520. Align the seat track pivot link channel vertically by resting
the upper surface of the seat track pivot link channel against the lower surface of the floor beam upper
chord/flange. Use acceptable tooling that will not damage parts.
(b) Onto the aft web of the floor beam at STA520. Align the seat track pivot link channel horizontally by locating
the seat track pivot link channel centrally to existing fastener holes in the floor beam. Use acceptable
tooling that will not damage parts.
(c) Transfer hole positions from the floor beam at STA520 through the seat track pivot link channel.
(d) Refer to SOPM 20-43-03 as an accepted procedure.
(e) Refer to SOPM 20-41-02 as an accepted procedure.
(f) Onto the aft surface of the floor beam at STA 520 in line with the end of the seat track.
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this figure.
MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
(a)0.187-0.19014BACB30VT6K5BOLTA
--14BACC30BL6COLLAR
FIGURE 5: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
LEFT OUTBOARD POSITION - INSTALLATION
(SHEET 2 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
40 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 41

MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
(a) Install with sealant BMS 5-95, TYPE 1, CLASS B-1/2 OR B-2. Refer to SOPM 20-50-11 as an accepted
procedure.
FIGURE 5: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
LEFT OUTBOARD POSITION - INSTALLATION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
41 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 42 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
540
STA STA
500 520
STA
360
SEE
RBL
45.5
RBL
24.75
LBL
24.75
LBL
45.5
STA
540
STA
520
STA
500D
FWD  STA
500C
NEW SEAT
TRACK SECTION
1521513
FIGURE 6: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION -
MODIFICATION FOR LATER INSTALLATION
(SHEET 1 OF 4)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  42 of 127

### Page 43 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
520  (11)
STA
12
500D  STA
523.49
0.10-
FWD<
A-A  LBL 45.5
STA  STA
500D  520
+++++++  -+++
D-D
STA  STA
500D  520
D-D  D-D
C-C  SEAT TRACK PIVOT
LINK CHANNEL
(REFERENCE)  B—B
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 6: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION -
MODIFICATION FOR LATER INSTALLATION
(SHEET 2 OF 4)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  43 of 127

### Page 44

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
-1143A5310Y121SEAT TRACKPut / Hold1
(a)1143A5310Y121SEAT TRACKMeasure2
(a)2BACF3F012R029NNFILLER, FLATMeasure3
(a)1149A5510-356RADIUS FILLERMeasure
(b) (c)--HOLESDrill4
(c) (d)--HOLESDrill5
(c) (b)--HOLESDrill6
(c) (e)--HOLESDrill7
(c) (e)--HOLESDrill8
(c) (f)--HOLESDrill9
(g)--GAPMeasure10
(h)-TYPE 2, CLASS ACHEMICAL CONVER-
SION
Apply11
(i) (j)-BMS10-11 TYPE IPRIMERApply12
(a) Locate the fastener holes at given positions from the existing floor beam location.
(b) Through the seat track pivot link channel, floor beam and the fillers into the seat track.
(c) See fastener code table for hole sizes.
(d) Through the seat track pivot link channel and the fillers into the seat track.
(e) Through the floor beam into the seat track.
(f) Back drill through the new seat track lower web using the stabilizer intercostal hole locations.
(g) Remove excess material from the existing seat track as necessary.
(h) Refer to SOPM 20-43-03 as an accepted procedure.
(i) Refer to SOPM 20-41-02 as an accepted procedure.
(j) Do not apply primer to the inside of the seat track channel or onto the seat track upper shoulders.
FIGURE 6: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION -
MODIFICATION FOR LATER INSTALLATION
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
44 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 45

The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this figure.
MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
(a)0.250-0.254--HOLESA
(a)0.187-0.190--HOLESB
-0.159-0.171--HOLESC
(a) Counter sink holes to 100 degrees near side.
FIGURE 6: SEAT TRACK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD POSITION -
MODIFICATION FOR LATER INSTALLATION
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
45 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 46 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
540
STA STA
500 520
STA
360
SEE (A
RBL
45  _5
RBL
24.75
LBL
24.75
LBL
45.5
STA
540
STA
520
STA
500D
STA
500C
FWDE
1521626
FIGURE 7: SEAT TRACK SPLICING BETWEEN STA 500C +9.950 AND STA 520 AT THE LEFT OUTBOARD
POSITION - PREPARATION FOR LATER INSTALLATION
(SHEET 1 OF 4)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  46 of 127

### Page 47 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA
500C  500D
LBL
45.5
+  + + + +  + +  + + + +
+  +  + +  +  + +  + +
- 16$22 LOCATIONS  FWD<
A-A
STA  STA
500C  500D
5X6(T 20 LOCATIONS
+++++7
FWD C
B-B
EXISTING
SEAT TRACK  NEW SEAT
TRACK
LBL
_ LBL  45.5
+  45.5
112 LOCATIONS
FWD C
C-C  D-D  1522026
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 7: SEAT TRACK SPLICING BETWEEN STA 500C +9.950 AND STA 520 AT THE LEFT OUTBOARD
POSITION - PREPARATION FOR LATER INSTALLATION
(SHEET 2 OF 4)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  47 of 127

### Page 48

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
--143A5310Y121SEAT TRACKPut / Hold1
--143A5310-125SPLICE ANGLEPut / Hold2
--143A5310-129RADIUS STRAPPut / Hold
--143A5310-127SPLICE ANGLEPut / Hold3
--143A5310-130RADIUS STRAPPut / Hold
--143A5310-133FLAT STRAPPut / Hold4
(a) (b) (e)--HOLESDrill5
(c)-TYPE 2, CLASS ACHEMICAL CONVER-
SION
Apply6
(d)-463-6-4ALUMINIZED EPOXY
PRIMER
Apply7
(a) Through the pilot holes in the splice angles, radius straps and flat strap into the seat tracks.
(b) See fastener code table for hole sizes.
(c) Refer to SOPM 20-43-03 as an accepted procedure.
(d) Refer to SOPM 20-41-04 as an accepted procedure.
(e) Minimum hole spacing between splice angle holes and floor panel holes is 3D.
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this figure.
MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
-0.250-0.254--HOLESA
FIGURE 7: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD
POSITION - PREPARATION FOR LATER INSTALLATION
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
48 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 49

MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
-0.187-0.190--HOLESB
FIGURE 7: SEAT TRACK SPLICING BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD
POSITION - PREPARATION FOR LATER INSTALLATION
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
49 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA
540
STA STA
500 520
STA
360
SEE
RBL
45.5
RBL
24.75
LBL
24.75
LBL
45.5
STA
540
STA
520
STA
500D
STA
500C
FWD '
FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION
- INSTALLATION
(SHEET 1 OF 6)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  737-53-1286
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  50 of 127

### Page 51 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA
LBL 45.5  500C  500D
B
+  + + + +  +  + +  + + + +
+ +  + +  +  + +  + +
A-A  FWD <
22 LOCATIONS & 4
EXISTING
SEAT TRACK
STA  STA
500D  500C
++++++.
→FWD
EXISTING
B-B  20 LOCATIONS  FLOOR BEAM
(REFERENCE)
NEW SEAT  EXISTING
TRACK  SEAT TRACK
LBL
45.5
+ +.  + +  __LBL
45.5
→ FWD  11/12
10)12
C-C  1° 12 LOCATIONS  D-D
(11) 12)
FIGURE 8: SEAT TRACK BETWEEN STA 500C +9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION
- INSTALLATION
(SHEET 2 OF 6)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  51 of 127

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
6 LOCATIONS -  - 2 LOCATIONS
STA  STA
520
STA
523.49
FWD C
E-E
LBL 45.5
(2)  STA  NEW SEAT  STA
520  TRACK  500D
SEAT TRACK
PIVOT LINK  → FWD  F-F
CHANNEL
STA  STA
520  500D
EXISTING  STABILIZER
FLOOR BEAM  INTERCOSTAL
+ + +  + ++++  +++++++
→ FWD
-17 LOCATIONS
12  G-G
H~H
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION
- INSTALLATION
(SHEET 3 OF 6)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  737-53-1286
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  52 of 127

### Page 53

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a)-BMS 5-95, TYPE 1,
CLASS B-1/2 OR B-2
SEALANTApply1
(b)-BMS 5-44, CLASS BBONDING ADHESIVEApply2
--143A5310Y121SEAT TRACKPut / Hold3
--BACF3F012R029NNFILLER, FLATPut / Hold4
--143A5310-48RADIUS FILLERPut / Hold5
--149A5510-356RADIUS FILLERPut / Hold6
--143A5310-125SPLICE ANGLEPut / Hold7
--143A5310-127SPLICE ANGLEPut / Hold8
--143A5310-129RADIUS STRAPPut / Hold9
--143A5310-130RADIUS STRAPPut / Hold10
--143A5310-133FLAT STRAPPut / Hold11
(c)1143A5310Y121SEAT TRACKInstall (New)12
(c)2BACF3F012R029NNFILLER, FLATInstall (New)
(c)3143A5310-48RADIUS FILLERInstall (New)
(c)1149A5510-356RADIUS FILLERInstall (New)
(c)1143A5310-125SPLICE ANGLEInstall (New)
(c)1143A5310-127SPLICE ANGLEInstall (New)
(c)1143A5310-129RADIUS STRAPInstall (New)
(c)1143A5310-130RADIUS STRAPInstall (New)
(c)1143A5310-133FLAT STRAPInstall (New)
(d)-BMS 5-95, TYPE 1,
CLASS B-1/2 OR B-2
SEALANTApply13
(e)-BMS 3-23CORROSION INHIBIT-
ING COMPOUND
Apply14
(a) To the mating surfaces of the splice parts. Refer to SOPM 20-50-19 as an accepted procedure.
(b) To the mating surfaces of the two flat fillers and the seat track pivot link channel. Refer to SOPM 20-50-
12 as an accepted procedure.
(c) See fastener code table.
(d) To the gap between the existing seat track and the new seat track. Refer to 737-700 SRM 51-20-05 and
SOPM 20-50-19 as accepted procedures.
(e) To all surfaces of the spliced area. Refer to 737-700 SRM 51-20-01 as an accepted procedure.
FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION
- INSTALLATION
(SHEET 4 OF 6)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
53 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 54 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
FASTENER
DIAMETER
(OPTIONAL)
LETTER CODE  HEAD LOCATION
D  6F  N = NEAR SIDE
F = FAR SIDE
(OPTIONAL)
COUNTERSINK  FASTENER
LENGTH/GRIP
(OPTIONAL)
EXAMPLE OF FASTENER SYMBOL
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this figure.
CODE  NAME  IDENTIFICATION  QTY  HOLE DIA  MORE DATA
BOLT  BACB30NN4K7  2  (a) (b)
WASHER  NAS1149D0463J  2  (a) (b)
NUT  BACN11Z4CD  2  (a) (b)
BOLT, FLUSH HEAD  BACB30VF3K3  2  (a) (b)
WASHER  NAS1149D0332J  2  (a) (b)
NUT  BACN10YR3CD  2  (a) (b)
C  BOLT  BACB30VF3K4  2  (a) (b)
WASHER  NAS1149D0332J  2  (a) (b)
NUT  BACN10YR3CD  2  (a) (b)
D  BOLT  BACB30VF3K10  6  (a) (b)
WASHER  NAS1149D0332J  6  (a) (b)
NUT  BACN10YR3CD  6  (a) (b)
BOLT  BACB30NN4K12  2  (a) (b)
WASHER  NAS1149D0463J  2  (a) (b)
NUT  BACN11Z4CD  2  (a) (b)
F  BOLT, PROTRUDING  BACB30VT6K3  17  (a) (c) (d)
HEAD
COLLAR  BACC30BL6  17  (a) (c)
FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION
- INSTALLATION
(SHEET 5 OF 6)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  Copyright © Unpublished Work - See page 1 for details.  BOEING PROPRIETARY -  737-53-1286  54 of 127

### Page 55

MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
(a) (c)-22BACB30YP8K4BOLT, 100 DEG HEX
DR
G
(a) (c)-22BACC30BL8COLLAR
(a) (c)-20BACB30VT6K4BOLTH
(a) (c)-20BACC30BL6COLLAR
(a) (c)-12BACB30VT6K5BOLTI
(a) (c)-12BACC30BL6COLLAR
(a) Install wet with BMS 5-95, TYPE 1, Class B-1/2 or B-2 sealant. Refer to 737-700 SRM 51-20-05 and
SOPM 20-50-19 as accepted procedures.
(b) Refer to SOPM 20-50-01 as an accepted procedure.
(c) Refer to 737-700 SRM 51-40-02 as an accepted procedure.
(d) BACR15FT5D5C rivet or BACR15FT6D5C rivet can be used in place of bolt and collar.
FIGURE 8: SEAT TRACK BETWEEN STA 500C + 9.950 AND STA 520 AT THE LEFT OUTBOARD POSITION
- INSTALLATION
(SHEET 6 OF 6)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
55 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA  STA
537.45  520  360
SEE A
STA
540
B  100000000dpo
LBL  EFWD
45.5
LBL
24.75
BL
O.O
RBL
24.75
RBL
45.5
1516 4
18
_FWD
1522106
FIGURE 9: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD
POSITION - INSTALLATION
(SHEET 1 OF 4)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  737-53-1286
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  56 of 127

### Page 57 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
) UpPER FLANGE
21213
-18)
3 12 13
117
A—A
STA
537.45  SECTION 44
SEAT TRACK  REF  SEAT TRACK
PIVOT LINK
+ -  + 0.020
- 0.020
UP
FWD <
B-B  1522881
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 9: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD
POSITION - INSTALLATION
(SHEET 2 OF 4)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  BOEING PROPRIETARY -  737-53-1286
Copyright © Unpublished Work - See page 1 for details.  57 of 127

### Page 58

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
1143A5595-39TRACK ASSYInstall (New)1
(a)-143A5595-39TRACK ASSYAlign
(b)-143A5595-31PIVOT LINK ASSY
STA520-540
Put2
(b)-143A5595-30PIVOT LINK ASSY
STA520-540
Put3
1BACB28Y4C178BUSHING-PLAINInstall (Kept)4
1BACB30US4K29DBOLTInstall (Kept)5
1NAS1149E0463PWASHER-PLAINInstall (Kept)6
1BACN10JD4CDNUTInstall (Kept)7
1BACB28AK05-170BUSHING-PLAINInstall (Kept)8
1BACB30NR5K31BOLT, HEX HEADInstall (New)9
1NAS1149E0563PWASHER-PLAINInstall (Kept)10
1BACN10JD5NUTInstall (Kept)11
(c)-143A5595-30PIVOT LINK ASSY
STA520-540
Put / Hold12
(c)-143A5595-31PIVOT LINK ASSY
STA520-540
Put / Hold
(c)1143A5595-30PIVOT LINK ASSY
STA520-540
Install (Kept)13
(c)1143A5595-31PIVOT LINK ASSY
STA520-540
Install (Kept)
(d)-143A5595-39TRACK ASSYInspect14
Through the Bushing
Straps into the Pivot
Links. (e)
4-HOLESDrill15
See Fastener Table.4-FASTENERSInstall (New)16
-1BACN10JD4CDNUTTighten17
(f)1BACP18BC02A08PPINInstall (New)18
-1BACN10JD5NUTTighten19
(f)1BACP18BC02A06PPINInstall (New)20
(a) Align the pivot link with the seat track crown using MIT002A0018-1 LOCATING JIG.
(b) Locate by aligning with the bolt and the bushing as given in Steps 4 and 5.
(c) Make sure the bushing straps are nested against the lower side of the seat track flange.
FIGURE 9: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD
POSITION - INSTALLATION
(SHEET 3 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
58 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 59

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(d) Make sure the seat track pivot link is vertically aligned with the Section 44 seat track. The vertical alignment
should be within +/- 0.020 inch for correct seat installation.
(e) Install the collar on the outer edge of the pivot link.
(f) Refer to SOPM 20-50-02 as an accepted procedure.
The codes shown below agree with the letter shown in the upper left corner of the fastener symbols in the figure.
A number in the lower right corner gives the grip length of the fastener. The QTY numbers shown below are the
number of fasteners necessary for this figure.
MORE DATAHOLE DIAQTYIDENTIFICATIONNAMECODE
Install collar against bush-
ing strap.
0.250-0.2544BACB30VT8K5BOLTA
-4BACC30BL8COLLAR
FIGURE 9: SEAT TRACK PIVOT LINK BETWEEN STA 520 AND STA 537.45 AT THE LEFT OUTBOARD
POSITION - INSTALLATION
(SHEET 4 OF 4)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 20, 2008
737-53-1286Revision 1 December 14, 2009
59 of 127
BOEING SERVICE BULLETIN 737-53-1286

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-53-1286
STA  STA  STA
537.45 520  360
STA
540
0000000.
LBL  _ FWD
45.5
LBL
24.75
RBL
24.75
RBL
45.5
STA
520
14 LOCATIONS
A 6F E
3/415
A-A  B-B  1530388
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
FIGURE 10: SEAT TRACK PIVOT LINK CHANNEL ON THE AFT OF FLOOR BEAM AT STA 520 AT THE
LEFT INBOARD POSITION - INSTALLATION
(SHEET 1 OF 3)
Original Issue: November 20, 2008
Revision 1 December 14, 2009  737-53-1286
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  60 of 127

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-53-1286/file/5d83a488591d.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
