# Boeing Special Attention Service Bulletin 737-53-1294: U.S. DOT/FAA - SB-737-53-1294-02

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2016-6670; AD 2017-02-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-53-1294](https://openairdocs.org/service-documents/boeing/sb-737-53-1294.md)
- Title as filed: U.S. DOT/FAA - SB-737-53-1294-02
- Pages: 273
- PDF: https://openairdocs.org/files/sha256/eb/59/eb59457bf8ead24396e5d8997cc2065074406c6e6f28ce3eb08a987e57135473
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1294/file/eb59457bf8ea

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1294
Original Issue: March 31, 2011
Revision 2: December 09, 2015
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Lower Bulkhead Chords at Body Station 540 - Skin Inspection,
Chord Splice Installation and Skin Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 300-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL AND/OR TRADE SECRET
Copyright © 2011 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
1 of 273
3.0

### Page 2

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
2 of 273
BOEING SERVICE BULLETIN 737-53-1294
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 7
S u m m a r y  ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A . E f f e c t i v i t y  ............................................... 1 3
1. Airplanes ............................................ 1 3
2 . S p a r e s  A f f e c t e d  ........................................ 2 3
B. Concurrent Requirements ...................................... 2 3
C. Reason ................................................ 2 3
D. Description .............................................. 2 4
E. Compliance .............................................. 2 5
F . A p p r o v a l  ............................................... 3 0
G. Manpower .............................................. 3 0
H. Weight and Balance Changes .................................... 3 4
I. Electrical Load Data ......................................... 3 5
J . R e f e r e n c e s  .............................................. 3 5
1. Existing Data: ......................................... 3 5
2. Data Supplied with this Service Bulletin: ........................... 3 6
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 3 6
K. Publications Affected ........................................ 3 6
L. Interchangeability and Intermixability of Parts ........................... 3 6
M. Software Accomplishment Summary ................................ 3 6
2. MATERIAL INFORMATION ........................................ 3 7
A. Material - Price and Availability ................................... 3 7
B. Industry Support Information .................................... 3 9
C. Parts Necessary for Each Airplane ................................. 3 9
1 . K i t s / P a r t s  ............................................ 3 9
2. Parts and Materials Supplied by the Operator ........................ 5 4
3. Parts Modified and Reidentified ................................ 5 5
4. Parts Removed and Not Replaced .............................. 5 5
D. Parts Necessary to Change Spares ................................. 5 5
E. Special Tooling - Price and Availability ............................... 5 5
F. Special Tooling Necessary to do this Service Bulletin ....................... 5 5
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 5 7
A. GENERAL INFORMATION ..................................... 5 7
B. WORK INSTRUCTIONS ....................................... 5 8
FIGURE 1: STA 540 BULKHEAD CHORDS - STRINGER S-22L TO S-23L - SKIN - DETAILED INSPECTION
.................................................. 6 5
FIGURE 2: STA 540 BULKHEAD CHORDS - STRINGER S-22R TO S-23R - SKIN - DETAILED INSPECTION
.................................................. 6 8
FIGURE 3: STA 540 BULKHEAD CHORDS - STRINGER S-22L TO S-23L - FASTENER HOLES - HFEC
INSPECTION .......................................... 7 1
FIGURE 4: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SPLICE PREPARATION
[Group 1-2, 4-5] ......................................... 7 3
FIGURE 5: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SPLICE INSTALLATION
[Group 1-2, 4-5] ......................................... 7 5
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
3 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 4

FIGURE 6: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SPLICE PREPARATION
[Group 3] ............................................ 7 7
FIGURE 7: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SPLICE INSTALLATION
[Group 3] ............................................ 7 9
FIGURE 8: STA 540 BULKHEAD CHORDS - STRINGER S-22R TO S-23R - FASTENER HOLES - HFEC
INSPECTION .......................................... 8 1
FIGURE 9: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SPLICE PREPARATION
.................................................. 8 3
FIGURE 10: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SPLICE INSTALLATION
.................................................. 8 5
FIGURE 11: STA 540 BULKHEAD CHORDS - STRINGER S-22L - TRIM ................ 8 7
FIGURE 12: STA 540 BULKHEAD CHORDS - STRINGER S-22R - TRIM ................ 8 9
FIGURE 13: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - CRACK
C U T - O U T............................................ 9 1
FIGURE 14: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - HOLE HFEC
INSPECTION .......................................... 9 4
FIGURE 15: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DRAG LINK
ASSEMBLY REMOVAL .................................... 9 6
FIGURE 16: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DOUBLER,
TRIPLER AND FILLER FABRICATION ........................... 1 0 0
FIGURE 17: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DOUBLER,
TRIPLER AND FILLER INSTALLATION ........................... 1 0 7
FIGURE 18: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 1] ............................... 1 1 4
FIGURE 19: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 2] ............................... 1 2 3
FIGURE 20: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 3] ............................... 1 3 2
FIGURE 21: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 4] ............................... 1 4 1
FIGURE 22: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 5] ............................... 1 5 0
FIGURE 23: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - CRACK
C U T - O U T........................................... 1 5 9
FIGURE 24: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - HOLE HFEC
INSPECTION ......................................... 1 6 2
FIGURE 25: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DRAG LINK
ASSEMBLY REMOVAL .................................... 1 6 4
FIGURE 26: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DOUBLER,
TRIPLER AND FILLER FABRICATION ........................... 1 6 8
FIGURE 27: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DOUBLER,
TRIPLER AND FILLER INSTALLATION ........................... 1 7 5
FIGURE 28: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 1] ............................... 1 8 2
FIGURE 29: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 2] ............................... 1 9 1
FIGURE 30: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 3] ............................... 2 0 0
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
4 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 5

FIGURE 31: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 4] ............................... 2 0 9
FIGURE 32: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - DRAG LINK
ASSY INSTALLATION [Group 5] ............................... 2 1 8
FIGURE 33: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - SPLICE
PLATE PREPARATION [Group 1-2, 4-5] .......................... 2 2 7
FIGURE 34: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - SPLICE
PLATE INSTALLATION [Group 1-2, 4-5] .......................... 2 3 0
FIGURE 35: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - SPLICE
PLATE PREPARATION [Group 3] .............................. 2 3 3
FIGURE 36: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - SKIN REPAIR - SPLICE
PLATE INSTALLATION [Group 3] .............................. 2 3 6
FIGURE 37: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - SPLICE
PLATE PREPARATION ................................... 2 3 9
FIGURE 38: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - SKIN REPAIR - SPLICE
PLATE INSTALLATION .................................... 2 4 2
FIGURE 39: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - POST-REPAIR INSPECTIONS
- EXTERNAL SKIN DETAILED INSPECTION ........................ 2 4 5
FIGURE 40: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - POST-REPAIR INSPECTIONS
- EXTERNAL SKIN, DOUBLER AND TRIPLER LFEC AND HFEC INSPECTIONS .... 2 4 9
FIGURE 41: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - POST-REPAIR INSPECTIONS
- INTERNAL SKIN HFEC INSPECTION ........................... 2 5 2
FIGURE 42: STA 540 BULKHEAD CHORDS - STRINGERS S-22L TO S-23L - POST-REPAIR INSPECTIONS
- SPLICE STRAP AND BULKHEAD OUTER CHORD HFEC INSPECTIONS ....... 2 5 5
FIGURE 43: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - POST-REPAIR INSPECTIONS
- EXTERNAL SKIN DETAILED INSPECTION ........................ 2 5 8
FIGURE 44: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - POST-REPAIR INSPECTIONS
- EXTERNAL SKIN, DOUBLER AND TRIPLER LFEC AND HFEC INSPECTIONS .... 2 6 2
FIGURE 45: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - POST-REPAIR INSPECTIONS
- INTERNAL SKIN HFEC INSPECTION ........................... 2 6 5
FIGURE 46: STA 540 BULKHEAD CHORDS - STRINGERS S-22R TO S-23R - POST-REPAIR INSPECTIONS
- SPLICE STRAP AND BULKHEAD OUTER CHORD HFEC INSPECTIONS ....... 2 6 8
APPENDIX A: FORMING AND FITTING REQUIREMENTS FOR DETAIL METAL PARTS ....... 2 7 1
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
5 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 6

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
6 of 273
BOEING SERVICE BULLETIN 737-53-1294
BLANK PAGE

### Page 7

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-53-1294Original Issue: March 31, 2011
Revision 2: December 09, 2015
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Lower Bulkhead Chords at Body Station 540 - Skin Inspection,
Chord Splice Installation and Skin Repair
This revision includes all pages of the service bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-19-04 is related to this service bulletin.
Effects of this Revision on airplanes on which Original Issue and Revision 1 were previously done:
Operators are encouraged to revise their existing aircraft maintenance schedule to accommodate the change
to compliance time and the repeat inspection interval.
REASON FOR REVISION
This revision is sent to change compliance time and the repeat inspection interval.
These sections were changed:
1. In Summary, changed the following:
– Background, added Service History Table and Boeing Service Related Problem (SRP).
– Compliance, added Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-19-04.
2. In Paragraph 1.C., Reason, added Service History Table and Boeing Service Related Problem (SRP).
3. In Paragraph 1.E., Compliance, changed the following:
– Added Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-19-04.
– In Table 1, changed Compliance Time and Repeat Interval.
– In Table 2, changed paragraph references.
4. In Paragraph 1.F., Approval, added Alternative Method Of Compliance (AMOC) statement for AD
2013-19-04.
5. In Paragraph 1.G., Manpower, revised tables for Skin Repair on left and right side.
6. In Paragraph 1.J., References, added Federal Aviation Administration (FAA) Airworthiness Directive
AD 2013-19-04.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
7 of 273

### Page 8

7. In Paragraph 2.C.1., Kits/Parts, changed note to clarify kit requirements.
8. In Paragraph 2.C.2., Parts and Materials Supplied by the Operator, added sealant and changed Low
Density Sealant Type.
9. In Paragraph 3.A., General Information, added general notes.
10. In Paragraph 3.B., Work Instructions, changed the following:
– PART 1, clarified inspection requirements.
– PART 4 - PART 5, changed access requirements and added instructions.
– PART 6 - PART 7, changed access requirements.
11. In Figures 3, 8, 14 and 24, changed footnote.
12. In Figures 4, 6, 9, 35 and 37, added new footnotes.
13. In Figures 5, 7, 10, 34, 36 and 38, changed Low Density Sealant Type.
14. In Figures 16, 17, 18, 19, 21, 26, 27, 28, 29 and 31 changed part numbers.
15. In Figure 33, added footnotes and changed illustration.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Pages with no vertical lines have no changes.
REVISION HISTORY
March 31, 2011Original Issue:
June 14, 2013Revision 1:
December 09, 2015Revision 2:
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
8 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-53-1294Original Issue: March 31, 2011
Revision 2: December 09, 2015
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Lower Bulkhead Chords at Body Station 540 - Skin Inspection,
Chord Splice Installation and Skin Repair
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
Accomplishment of this service bulletin will detect and prevent cracks in the skin common to the fasteners at
the bulkhead chord joints at Body Station (STA) 540 between stringers S-22 and S-23 on both the left and right
sides of the airplane. If the work given in this service bulletin is not accomplished fatigue cracks may develop
in the skin common to the fasteners and the bulkhead chord joints at STA 540 between stringers S-22 and S-23.
If not corrected, cracks in the skin can result in difficulty to achieve pressurization or rapid decompression of
the cabin.
One operator reported finding cracks in the skin on a 737-700 series airplane at STA 540 just below stringer
S-22L. A Boeing investigation revealed that the design at STA 540 bulkhead chords has insufficient load path
where the chords meet between stringers S-22 and S-23 on both the left and right sides of the airplane. As a
result, fatigue cracks may develop in the skin common to the fasteners at the bulkhead chord joints at STA 540
between stringers S-22 and S-23 on both the left and right sides of the airplane.
Service History
Flight-HoursFlight-Cycles
Crack Length
Model Right Side Left Side
56,75733,3282.40-737-700
52,23723,6465.75-737-700
54,02031,2014.50-737-700
36,66522,635-2.125737-700
This service bulletin is issued to give instructions to inspect the skin at STA 540 around the lower bulkhead
chords between stringer S-22 and S-23 on both the left and right sides of the airplane. It is also issued to give
instructions to install a splice at the STA 540 bulkhead chords between stringer S-22 and S-23 on both the left
and right sides of the airplane.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
9 of 273

### Page 10

Boeing Service Related Problem (SRP) 737NG-SRP-53-0328  and 737NG-SRP-53-0478 are related to this
service bulletin.
This table is provided to operators for planning purposes only. Refer to the applicable sections for more
information.
ReferenceAffectedPlanning Data
Paragraph 1.A.2., Spares AffectedNoSpares Affected
Paragraph 1.E., ComplianceYesAD Related
Paragraph 1.H., Weight and Balance ChangesYesWeight and Balance Change
Paragraph 1.I., Electrical Load DataNoElectrical Load Changed
Paragraph 1.K., Publications AffectedNoPublications Affected
Paragraph 1.K., Publications AffectedNoAirplane Flight Operations Affected
(Flight Crew Operations Manual and/or
FAA Approved Airplane Flight Manual)
Paragraph 2.C.1., Kits/PartsYesKits/Parts Required
Paragraph 2.C.2., Parts and Materials Supplied
by the Operator
YesOperator Supplied Material
Paragraph 2.F., Special Tooling Necessary to
do this Service Bulletin
YesSpecial Tooling Required
ACTION (PRR 38275-140S)
Remove the wing-to-body-fairings 192BL and 192BR for access. Do detailed and High Frequency Eddy Current
(HFEC) inspections of the skin around the eight fasteners common to the ends of the STA 540 bulkhead chords
between stringer S-22 and stringer S-23 for any crack on the left and right sides of the airplane. If any crack is
found in the skin, install a skin repair on that side of the airplane and install a chord splice as a preventive
modification on the non-cracked side of the airplane. If any crack is found in the chords, contact The Boeing
Company for repair instructions and do the repair. If no crack is found, install a chord splice on both sides of the
airplane as a preventive modification or repeat the inspection. If a skin repair is installed do post-repair detailed
and HFEC inspections of the repaired area.
EFFECTIVITY
737-600, 737-700, 737-700C, 737-800, 737-900 Series Airplanes. Refer to Paragraph 1.A., Effectivity for the
list of affected airplanes.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-19-04 is related to this service bulletin.
The effective date of AD 2013-19-04 is November 4, 2013.
Refer to Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
10 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 11

INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of February 01, 2008. Please refer to
Paragraph 2.B., Industry Support Information.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Boeing Supplied Kits/Parts.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
11 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 12 (OCR)

BOEING SERVICE BULLETIN 737-53-1294
STA
540  S-22L
S-23L
S-22L
S-23L
LEFT SIDE SHOWN,  1844852
RIGHT SIDE SIMILAR
Original Issue: March 31, 2011
Revision 2: December 09, 2015  PROPRIETARY - Copyright © Unpublished  Export Controlled ECCN: 9E991 - BOEING  737-53-1294
Work - See page 1 for details.  12 of 273

### Page 13

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1294
Original Issue: March 31, 2011
Revision 2: December 09, 2015
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Lower Bulkhead Chords at Body Station 540 - Skin Inspection,
Chord Splice Installation and Skin Repair
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplanes shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 38275-140S for data about this change.
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-700 series airplanes between line number 1 and 2849.-1
737-700 series airplanes with increased gross weight between line
number 1 and 2849.
-2
737-700C series airplanes between line number 1 and 2849.-3
737-600/-800 series airplanes between line number 1 and 2849.-4
737-900 series airplanes between line number 1 and 2849.-5
Airplane Models:
737-600, 737-700, 737-700C, 737-800, 737-900
GroupVariable Number
1YA001 - YA099
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
13 of 273

### Page 14

GroupVariable Number
1YA101 - YA199
1YA201 - YA211
1YA221
1YA231 - YA242
1YA251 - YA256
1YA271 - YA272
1YA291
1YA301 - YA302
1YA311 - YA314
1YA321 - YA323
1YA336 - YA345
1YA351
1YA356 - YA357
1YA366 - YA367
1YA371 - YA377
1YA501 - YA536
1YA541 - YA552
1YA571 - YA578
1YA601 - YA615
1YA621 - YA622
1YA626 - YA631
1YA635 - YA636
1YA641 - YA642
1YA645 - YA650
1YA656 - YA659
1YA666 - YA667
1YA671 - YA672
1YA681 - YA691
1YA701 - YA710
1YA721 - YA722
1YA731 - YA734
1YA751 - YA756
1YA801 - YA803
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
14 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 15

GroupVariable Number
1YA809
1YA811 - YA814
1YA831 - YA835
1YA841 - YA862
1YA881 - YA882
1YA891 - YA892
1YA961 - YA978
1YB001 - YB006
1YB101 - YB132
1YB151 - YB153
1YB156 - YB158
1YB161 - YB164
1YB171 - YB172
1YB181 - YB184
1YB201 - YB208
1YB271
1YB276
1YB301 - YB310
1YB371 - YB392
1YB501 - YB502
1YB521 - YB526
1YB541 - YB544
1YB551
1YB561 - YB598
1YB601 - YB632
1YB651
1YB656
1YB671 - YB672
1YB851 - YB863
1YB871 - YB874
1YB881 - YB893
1YB901 - YB903
1YB911
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
15 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 16

GroupVariable Number
1YB961 - YB974
1YB986 - YB987
4YC001 - YC030
4YC051 - YC084
4YC091 - YC094
4YC101 - YC104
4YC111 - YC113
4YC121
4YC126 - YC127
4YC136 - YC141
4YC146 - YC147
4YC151 - YC156
4YC166 - YC171
4YC176 - YC179
4YC186 - YC190
4YC201 - YC203
4YC206 - YC207
4YC301 - YC305
4YC321 - YC387
4YC391 - YC394
4YC396
4YC401 - YC417
4YC421 - YC422
4YC426 - YC428
4YC436 - YC439
4YC441 - YC448
4YC451 - YC455
4YC459
4YC461 - YC467
4YC471 - YC499
4YC501 - YC526
4YC571 - YC583
4YC587 - YC589
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
16 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 17

GroupVariable Number
4YC591 - YC593
4YC601 - YC655
4YC681 - YC696
4YC701 - YC715
4YC720 - YC725
4YC727 - YC752
4YC761 - YC770
4YC781 - YC793
4YC801 - YC892
4YC901 - YC907
4YC921 - YC922
4YC931 - YC932
4YC941 - YC951
4YC971 - YC978
4YC981 - YC983
4YD001 - YD007
4YD021 - YD025
4YD041 - YD057
4YD081 - YD084
4YD101 - YD110
4YD121 - YD126
4YD151 - YD159
4YD171 - YD172
4YD201 - YD203
4YD206 - YD209
4YD216 - YD219
4YD251 - YD254
4YD256 - YD257
4YD261
4YD301 - YD334
4YD391
4YD401 - YD410
4YD412 - YD415
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
17 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 18

GroupVariable Number
4YD481 - YD485
4YD491 - YD499
5YD501 - YD512
5YD531 - YD535
5YD541 - YD547
5YD561 - YD564
5YD571 - YD572
5YD591 - YD595
5YD601 - YD612
5YD651 - YD655
4YE001 - YE020
4YE051
4YE101 - YE109
4YE151 - YE157
4YE171 - YE172
4YE201 - YE206
4YE301 - YE305
4YE321 - YE326
4YE371 - YE383
4YF001 - YF002
4YF021 - YF029
4YF051 - YF054
4YF086
4YF106 - YF107
4YF111
4YF176 - YF178
4YF201 - YF202
4YF501 - YF513
2YG001 - YG044
2YG061 - YG064
2YG066 - YG089
2YG091 - YG099
2YG101 - YG103
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
18 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 19

GroupVariable Number
2YG111 - YG114
2YG116 - YG121
2YG201 - YG205
2YG211 - YG214
2YG221
2YG251 - YG252
3YG501 - YG509
3YG601 - YG602
3YG701
3YG711
4YJ001 - YJ013
4YJ021
4YJ471 - YJ480
4YJ501 - YJ517
4YJ531 - YJ570
4YJ591 - YJ598
4YJ631 - YJ632
4YJ671 - YJ694
4YJ801 - YJ867
4YJ871 - YJ876
4YJ901 - YJ904
4YJ908 - YJ929
4YJ931 - YJ937
4YJ941 - YJ956
4YJ976 - YJ977
4YK001 - YK007
4YK101 - YK104
4YK111 - YK112
4YK121 - YK122
4YK131 - YK133
4YK136 - YK139
4YK141 - YK142
4YK146 - YK148
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
19 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 20

GroupVariable Number
4YK151 - YK154
4YK161 - YK167
4YK171
4YK176 - YK177
4YK186
4YK191
4YK301 - YK310
4YK321 - YK339
4YK361 - YK375
4YK401 - YK406
4YK426 - YK427
4YK431 - YK450
4YK456 - YK461
4YK476
4YK480 - YK487
4YK495
4YK511 - YK516
4YK521 - YK524
4YK551 - YK571
4YK576 - YK577
4YK580 - YK585
4YK601 - YK602
4YK606 - YK607
4YK611 - YK616
4YK621 - YK634
4YK641 - YK644
4YK651 - YK661
4YK671 - YK672
4YK676 - YK677
4YK681 - YK684
4YK701 - YK713
4YK716 - YK719
4YK721 - YK741
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
20 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 21

GroupVariable Number
4YK751 - YK764
4YK791 - YK792
4YK796 - YK797
4YK801 - YK899
4YK901 - YK912
4YK918 - YK919
4YK921 - YK927
4YK941 - YK955
4YK961 - YK971
4YK981 - YK987
4YL001 - YL005
4YL011 - YL016
4YL021 - YL024
4YL051 - YL052
4YL056 - YL057
4YL061
4YL066 - YL069
4YL076 - YL077
4YL101 - YL125
4YL201 - YL211
4YL271 - YL272
4YL281 - YL284
4YL301 - YL303
4YL311 - YL312
4YL316 - YL320
4YL351 - YL353
4YL371 - YL374
4YL401
4YL421 - YL427
4YL431 - YL437
4YL461 - YL474
4YL501 - YL507
4YL531 - YL534
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
21 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 22

GroupVariable Number
4YL541
4YL561 - YL565
4YL591 - YL592
4YL601 - YL606
4YL611
4YL616 - YL617
4YL621
4YL661 - YL664
4YL676
4YL901 - YL910
4YL921
4YL931 - YL934
4YL951 - YL954
1YM101 - YM103
1YM201 - YM240
1YM251 - YM299
1YM301 - YM378
1YM471
1YM481 - YM484
1YM501 - YM515
1YM521 - YM522
1YM541
1YM551 - YM553
1YM571 - YM572
1YM581 - YM582
1YM591 - YM593
1YM631 - YM634
1YM641 - YM652
1YM671 - YM672
1YM691 - YM694
1YM701 - YM707
1YN001 - YN016
1YN021 - YN024
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
22 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 23

GroupVariable Number
1YN061
1YN071 - YN079
1YN091 - YN092
1YN101 - YN112
1YN121
1YN201 - YN202
1YN211 - YN216
1YN231 - YN235
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
Accomplishment of this service bulletin will detect and prevent cracks in the skin common to the fasteners
at the bulkhead chord joints at Body Station (STA) 540 between stringers S-22 and S-23 on both the
left and right sides of the airplane. If the work given in this service bulletin is not accomplished fatigue
cracks may develop in the skin common to the fasteners and the bulkhead chord joints at STA 540
between stringers S-22 and S-23. If not corrected, cracks in the skin can result in difficulty to achieve
pressurization or rapid decompression of the cabin.
One operator reported finding cracks in the skin on a 737-700 series airplane at STA 540 just below
stringer S-22L. A Boeing investigation revealed that the design at STA 540 bulkhead chords has
insufficient load path where the chords meet between stringers S-22 and S-23 on both the left and right
sides of the airplane. As a result, fatigue cracks may develop in the skin common to the fasteners at
the bulkhead chord joints at STA 540 between stringers S-22 and S-23 on both the left and right sides
of the airplane.
Service History
Flight-HoursFlight-Cycles
Crack Length
Model Right Side Left Side
56,75733,3282.40-737-700
52,23723,6465.75-737-700
54,02031,2014.50-737-700
36,66522,635-2.125737-700
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
23 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 24

This service bulletin is issued to give instructions to inspect the skin at STA 540 around the lower
bulkhead chords between stringer S-22 and S-23 on both the left and right sides of the airplane. It is
also issued to give instructions to install a splice at the STA 540 bulkhead chords between stringer
S-22 and S-23 on both the left and right sides of the airplane.
Boeing Service Related Problem (SRP) 737NG-SRP-53-0328  and 737NG-SRP-53-0478 are related
to this service bulletin.
Revision 1 was sent to provide replacement kits and to correct some manpower information. Ten kits
in the original issue of this service bulletin had incorrect part numbers for self-locking nut. Part numbers
for drag link assemblies are changed to resolve hole alignment issues. Also, additional access information
including fuel tank access is added for the accomplishment of the repair.
Revision 2 is sent to revise the compliance time and the repeat inspection interval.
D. Description
Remove the wing-to-body-fairings 192BL and 192BR for access. Do detailed and High Frequency Eddy
Current (HFEC) inspections of the skin around the eight fasteners common to the ends of the STA 540
bulkhead chords between stringer S-22 and stringer S-23 for any crack on the left and right sides of
the airplane. If any crack is found in the skin, install a skin repair on that side of the airplane and install
a chord splice as a preventive modification on the non-cracked side of the airplane. If any crack is
found in the chords, contact The Boeing Company for repair instructions and do the repair. If no crack
is found, install a chord splice on both sides of the airplane as a preventive modification or repeat the
inspection. If a skin repair is installed do post-repair detailed and HFEC inspections of the repaired
area.
Revision 2 - Effects of this Revision on airplanes on which Original Issue and Revision 1 were previously
done:
Operators are encouraged to revise their existing aircraft maintenance schedule to accommodate the
change to compliance time and the repeat inspection interval.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-2:
Affected Maintenance Zones
ZoneModel
131, 132, 192737-700
Group 3:
Affected Maintenance Zones
ZoneModel
131, 132, 192737-700C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
24 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 25

Group 4:
Affected Maintenance Zones
ZoneModel
131, 132, 192737-600, 737-800
Group 5:
Affected Maintenance Zones
ZoneModel
131, 132, 192737-900
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-19-04 is related to this service
bulletin. The effective date of AD 2013-19-04 is November 4, 2013.
For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing Service Bulletin 737-21-1149, the flight cycle related compliance times are different from
those specified in this service bulletin. All initial compliance times (thresholds) specified in flight cycles
must be reduced to half of those specified in this service bulletin. All repeat interval compliance times
specified in flight cycles must be reduced to one-quarter of those specified in this service bulletin.
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
25 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 26

Table 1: Skin Inspection and Modification/Repair
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
3,300 flight cycles
(a)
For airplanes having
less than 14,000 total
flight cycles as of the
Revision 2 date of
this Service Bulletin:
Before
14,000 total
flight cycles
Do a detailed inspection
and a High Frequency Ed-
dy Current (HFEC) inspec-
tion of the skin for cracks
in the area around the eight
fasteners securing the STA
540 bulkhead chords be-
tween stringer S-22 and S-
23 in accordance with
Paragraph 3.B.1. Work In-
structions, PART 1 - IN-
SPECTION.
Airplanes with less than
27,500 total flight cycles as
of the effective date of AD
2013-19-04 and have not
accomplished a detailed
inspection and a High Fre-
quency Eddy Current
(HFEC) inspection in accor-
dance with the original is-
sue or Revision 1 of this
service bulletin.
Within 4,000 flight cy-
cles after the Revi-
sion 2 date of this
Service Bulletin
For airplanes having
equal to or more than
14,000 total flight cy-
cles as of the Revi-
sion 2 date of this
Service Bulletin:
Before 18,000 total
flight cycles
OR
within 4,000 flight cy-
cles after the effective
date of AD 2013-19-
04, whichever occurs
later.
3,300 flight cycles
(a)
Within 1,500 flight cy-
cles after the effective
date of AD 2013-19-
04
Before
31,500 total
flight cycles
Do a detailed inspection
and a High Frequency Ed-
dy Current (HFEC) inspec-
tion of the skin for cracks
in the area around the eight
fasteners securing the STA
540 bulkhead chords be-
tween stringer S-22 and S-
23 in accordance with
Paragraph 3.B.1. Work In-
structions, PART 1 - IN-
SPECTION.
Airplanes with 27,500 or
more total flight cycles as
of the effective date of AD
2013-19-04 and have not
accomplished a detailed
inspection and a High Fre-
quency Eddy Current
(HFEC) inspection in accor-
dance with the original is-
sue or Revision 1 of this
service bulletin.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
26 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 27

Table 1: Skin Inspection and Modification/Repair
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
3,300 flight cycles
(a)
-Within
4,000 flight
cycles after
the last in-
spection
Do a detailed inspection
and a High Frequency Ed-
dy Current (HFEC) inspec-
tion of the skin for cracks
in the area around the eight
fasteners securing the STA
540 bulkhead chords be-
tween stringer S-22 and S-
23 in accordance with
Paragraph 3.B.1. Work In-
structions, PART 1 - IN-
SPECTION.
Airplanes that have accom-
plished a detailed inspec-
tion and a High Frequency
Eddy Current (HFEC) in-
spection in accordance
with the original issue or
Revision 1 of this service
bulletin.
-Before further flightRepair the cracking in ac-
cordance with Paragraph
3.B.4. Work Instructions,
PART 4 - SKIN REPAIR -
LEFT SIDE
If any crack is found in the
skin on the left side of the
airplane and no crack is
found on the right side of
the airplane
(b)
AND
Do the preventive modifica-
tion on the right side in ac-
cordance with Paragraph
3.B.3. Work Instructions,
PART 3 - PREVENTIVE
MODIFICATION - RIGHT
SIDE.
-Before further flightRepair the cracking in ac-
cordance with Paragraph
3.B.5. Work Instructions,
PART 5 - SKIN REPAIR -
RIGHT SIDE
If any crack is found in the
skin on the right side of the
airplane and no crack is
found on the left side of the
airplane
(b)
AND
Do the preventive modifica-
tion on the left side in accor-
dance with Paragraph
3.B.2. Work Instructions,
PART 2 - PREVENTIVE
MODIFICATION - LEFT
SIDE.
-Before further flightRepair the cracks in accor-
dance with Paragraph
3.B.4. Work Instructions,
PART 4 - SKIN REPAIR -
LEFT SIDE and Paragraph
3.B.5. Work Instructions,
PART 5 - SKIN REPAIR -
RIGHT SIDE.
If any crack is found in the
skin on both sides of the
airplane
(b)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
27 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 28

Table 1: Skin Inspection and Modification/Repair
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
(a) Installation of the preventive modification or skin repair in accordance with Work Instructions, Paragraph
3.B., PART 2 or PART 4 on the left side of the airplane and PART 3 or PART 5 on the right side of the
airplane terminates this requirement for repeat inspections.
(b) Refer to Table 2 for post repair inspections.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
28 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 29

Table 2: Post Repair Inspections
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs
Later)
ActionCondition
5,000 flight cy-
cles
Within 5,000
flight cycles
after the in-
stallation of
the repair
Before
36,000 to-
tal flight
cycles
Do a detailed inspection of the skin surrounding
the filler under the drag link assembly for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step e.(1).
All airplanes that
have done the
skin repair on the
left side of the air-
plane in accor-
dance with Para-
graph 3.B., Work
Instructions,
PART 4 - SKIN
REPAIR - LEFT
SIDE.
10,000 flight cy-
cles
Within 10,000
flight cycles
after the in-
stallation of
the repair
Before
36,000 to-
tal flight
cycles
Do an external Low Frequency Eddy Current
(LFEC) inspection of the skin and doubler and
an external HFEC inspection of the tripler for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step e.(2).
AND
Do an internal HFEC inspection of the skin for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step e.(3).
AND
Do an internal HFEC inspection of the splice
plate and STA 540 bulkhead outer chord for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step e.(4).
5,000 flight cy-
cles
Within 5,000
flight cycles
after the in-
stallation of
the repair
Before
36,000 to-
tal flight
cycles
Do a detailed inspection of the skin surrounding
the filler under the drag link assembly for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step f.(1).
All airplanes that
have done the
skin repair on the
right side of the
airplane in accor-
dance with Para-
graph 3.B., Work
Instructions,
PART 5 - SKIN
REPAIR - RIGHT
SIDE
10,000 flight cy-
cles
Within 10,000
flight cycles
after the in-
stallation of
the repair
Before
36,000 to-
tal flight
cycles
Do an external LFEC inspection of the skin and
doubler and an external HFEC inspection of
the tripler for cracking in accordance with
Paragraph 3.B.7., Work Instructions, PART 7
- POST-REPAIR INSPECTIONS, step f.(2).
AND
Do an internal HFEC inspection of the skin for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step f.(3).
AND
Do an internal HFEC inspection of the splice
plate and STA 540 bulkhead outer chord for
cracking in accordance with Paragraph 3.B.7.,
Work Instructions, PART 7 - POST-REPAIR
INSPECTIONS, step f.(4)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
29 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 30

Table 2: Post Repair Inspections
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs
Later)
ActionCondition
-Before further flightContact The Boeing Company for repair instruc-
tions and do the repair.
Any crack is
found
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
The Manager, Seattle Aircraft Certification Office, FAA, approves the accomplishment of the inspection
program, repairs, and modification defined in Paragraph 1.E., Compliance, Table 1, of SB 737-53-1294,
Revision 2 as an alternative method of compliance to the corresponding requirements of paragraph
(g) and (h) of AD 2013-19-04.
If any cracking is found during any inspection required by AD 2013-19-04, and SB 737-53-1294, Revision
2, specifies to contact Boeing for appropriate action, then before further flight, repair using a method
approved in accordance with the procedures specified in paragraph (l) of AD 2013-19-04.
The access and restoration instructions identified in the Work Instructions of SB 737-53-1294, Revision
2, are not required by AD 2013-19-04. Operators may perform those actions in accordance with approved
maintenance procedures.
All provisions of AD 2013-19-04 that are not specifically referenced in the above statement remain fully
applicable and must be complied with.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection and preventive
modification for each airplane. This estimate is for direct labor only, done by an experienced crew.
Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time.
These are some examples of lost time:
• Time to adjust to the workplace
• Time to schedule the work
• Time to inspect the work
• Time to cure the materials
• Time to make the parts
• Time to find the tools.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
30 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 31

INSPECTIONS
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.503.002Open Access
2.752.751FIGURE 1: Detailed and
HFEC Inspection (left side)
2.752.751FIGURE 2: Detailed and
HFEC Inspection (right side)
1.503.002Close Access
0.500.501Test
9.0012.00TOTAL FOR EACH AIRPLANE
PREVENTIVE MODIFICATION - LEFT SIDE
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.751.751Open Access
0.750.751FIGURE 3: HFEC Inspection
1.001.001FIGURE 4 or FIGURE 6:
Splice Preparation
0.750.751FIGURE 5 or FIGURE 7:
Splice Installation
0.500.501FIGURE 11: Stringer 22-L
Trim
0.250.251Test
1.751.751Close Access
6.756.75TOTAL FOR LEFT SIDE OF AIRPLANE
PREVENTIVE MODIFICATION - RIGHT SIDE
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.751.751Open Access
0.750.751FIGURE 8: HFEC Inspection
1.001.001FIGURE 9: Splice Preparation
0.750.751FIGURE 10: Splice Installation
0.500.501FIGURE 12: Stringer 22-R
Trim
0.250.251Test
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
31 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 32

PREVENTIVE MODIFICATION - RIGHT SIDE
Elapsed HoursTask HoursNumber of Per-
sons
Task
1.751.751Close Access
6.756.75TOTAL FOR RIGHT SIDE OF AIRPLANE
SKIN REPAIR - LEFT SIDE
Elapsed
Hours
Task HoursNumber of
Persons
Task
2.208.804Open Access
3.753.751FIGURE 13: Crack Cut-out
1.001.001FIGURE 14: Hole HFEC Inspection
2.252.251FIGURE 15: Drag Link Assy Removal
2.002.001FIGURE 16: Doubler, Tripler and Filler
Fabrication (a)
3.256.502FIGURE 17: Double, Tripler and Filler
Installation (a)
2.505.002FIGURE 18, FIGURE 19, FIGURE 20,
FIGURE 21 or FIGURE 22: Drag Link
Assy Installation
3.003.001FIGURE 33 or FIGURE 35: Splice Plate
Preparation
1.001.001FIGURE 34 or FIGURE 36: Splice Plate
Installation
2.502.501Secondary Barrier Sealant Repair
0.803.204Close Access
24.2539.00TOTAL FOR LEFT SIDE OF AIRPLANE
(a) Estimate does not include time to manufacture parts.
SKIN REPAIR - RIGHT SIDE
Elapsed
Hours
Task HoursNumber of
Persons
Task
2.208.804Open Access
3.753.751FIGURE 23: Crack Cut-out
1.001.001FIGURE 24: Hole HFEC Inspection
2.252.251FIGURE 25: Drag Link Assy Removal
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
32 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 33

SKIN REPAIR - RIGHT SIDE
Elapsed
Hours
Task HoursNumber of
Persons
Task
2.002.001FIGURE 26: Doubler, Tripler and Filler
Fabrication (a)
3.256.502FIGURE 27: Doubler, Tripler and Filler
Installation (a)
2.505.002FIGURE 28, FIGURE 29, FIGURE 30,
FIGURE 31 or FIGURE 32: Drag Link
Assy Installation
3.003.001FIGURE 37: Splice Plate Preparation
1.001.001FIGURE 38: Splice Plate Installation
2.502.501Secondary Barrier Sealant Repair
0.803.204Close Access
24.2539.00TOTAL FOR RIGHT SIDE OF AIRPLANE
(a) Estimate does not include time to manufacture parts.
POST-REPAIR INSPECTIONS - LEFT SIDE
Elapsed
Hours
Task HoursNumber of
Persons
Task
2.252.251Open Access
0.750.751FIGURE 39: External Skin Detailed In-
spection
1.753.502FIGURE 40: External Skin, Doubler and
Tripler Eddy Current Inspections
0.751.502FIGURE 41: Internal Skin HFEC Inspec-
tion
0.751.502FIGURE 42: Splice Strap and Bulkhead
Outer Chord HFEC Inspections
2.252.251Close Access
0.500.251Test
9.0012.00TOTAL FOR LEFT SIDE OF AIRPLANE
POST-REPAIR INSPECTIONS - RIGHT SIDE
Elapsed
Hours
Task HoursNumber of
Persons
Task
2.252.251Open Access
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
33 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 34

POST-REPAIR INSPECTIONS - RIGHT SIDE
Elapsed
Hours
Task HoursNumber of
Persons
Task
0.750.751FIGURE 43: External Skin Detailed In-
spection
1.753.502FIGURE 44: External Skin, Doubler and
Tripler Eddy Current Inspections
0.751.502FIGURE 45: Internal Skin HFEC Inspec-
tion
0.751.502FIGURE 46: Splice Strap and Bulkhead
Outer Chord HFEC Inspections
2.252.251Close Access
0.500.251Test
9.0012.00TOTAL FOR RIGHT SIDE OF AIRPLANE
H. Weight and Balance Changes
Group 1-3:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
--Airplanes with a preventive modification in-
stalled on both sides.
+ 1,500+ 3.25Airplanes with a preventive modification in-
stalled on one side and a skin repair installed
on the other side.
+ 3,000+ 6.50Airplanes with a skin repair installed on both
sides.
Group 4:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
--Airplanes with a preventive modification in-
stalled on both sides
+ 1,670+ 3.25737-600 airplanes with a preventive modifica-
tion installed on one side and a skin repair in-
stalled on the other side
+ 3,340+ 6.50737-600 airplanes with a skin repair installed
on both sides
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
34 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 35

Group 4:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
+ 1,110+ 3.25737-800 airplanes with a preventive modifica-
tion installed on one side and a skin repair in-
stalled on the other side
+ 2,220+ 6.50737-800 airplanes with a skin repair installed
on both sides
Group 5:
Change in Moment
(Pound-Inches)
Change in Weight
(Pounds)Airplane
--Airplanes with a preventive modification in-
stalled on both sides
+ 910+ 3.25Airplanes with a preventive modification in-
stalled on one side and a skin repair installed
on the other side
+ 1,820+ 6.50Airplanes with a skin repair installed on both
sides
I. Electrical Load Data
Not changed.
J. References
1. Existing Data:
a. Engineering Change Memo PRR 38275-140S
b. Boeing Service Letter 737-SL-51-042
c. Boeing Service Related Problem (SRP) 737NG-SRP-53-0328, 737NG-SRP-53-0478
d. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2013-19-04
e. Standard Overhaul Practices Manual (SOPM) 20-41-02, 20-41-05, 20-43-03, 20-50-01,
20-50-10, 20-50-19
f. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Part 6, 51-00-26
g. 737-600/700/800/900 Aircraft Maintenance Manual (AMM) 06-41-00, 21-25-02, 21-51-24,
25-52-17, 28-11-00, 28-11-31
h. 737-600 Structural Repair Manual (SRM) 51-20-05, 51-30-01, 51-40-06, 51-40-08, 51-40-09
i. 737-700 Structural Repair Manual (SRM) 51-20-05, 51-30-01, 51-40-06, 51-40-08, 51-40-09
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
35 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 36

j. 737-700CONV Structural Repair Manual (SRM) 51-20-05, 51-30-01, 51-40-06, 51-40-08,
51-40-09
k. 737-700IGW (BBJ) Structural Repair Manual (SRM) 51-20-05, 51-30-01, 51-40-06, 51-40-08,
51-40-09
l. 737-800 Structural Repair Manual (SRM) 51-20-05, 51-30-01, 51-40-06, 51-40-08, 51-40-09
m. 737-900 Structural Repair Manual (SRM) 51-20-05, 51-30-01, 51-40-06, 51-40-08, 51-40-09
n. 737-600/700/800/900 Structural Repair manual, Chapter 51.
2. Data Supplied with this Service Bulletin:
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin:
TitleDrawing Number
Section 43/44, Lower Lobe Integration143A0060
Section 42/44 Integration, STA 540 - S4R-S24L142A0040
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated this service bulletin for effects on Fatigue Critical Structure (FCS) and for
changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This
service bulletin affects FCS and new DTI requirements for the structure affected are contained in
Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
M. Software Accomplishment Summary
Not affected.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
36 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 37

2.    MATERIAL INFORMATION
A. Material - Price and Availability
Boeing can supply the kits shown in Paragraph 2.C., Parts Necessary for Each Airplane. Operators
are encouraged to share schedule requirements with Boeing for incorporation of the service bulletin.
The kits are subject to the terms and conditions of the Boeing standard purchase order acknowledgment.
Prices are in United States Dollars. Terms: Net 30 days.
Reference this service bulletin and submit your purchase order by one of these methods:
1. Order on-line via ATA Spec 2000 or The Boeing PART Page
2. Fax to (206) 662-7145
REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the
Revision 2 date of
this Service Bulletin
(US Dollars)
ROLT as of the Revi-
sion 2 date of this
Service Bulletin (Cal-
endar Days)
NameKit Number
$695.00275Splice Installation - Section 11,
Lower Bulkhead Chords at
STA 540 - Left Side
002A0003-164
$695.00285Splice Installation - Section 11,
Lower Bulkhead Chords at
STA 540 - Right Side
002A0003-165
$482.000200Splice Installation - Section 11,
Lower Bulkhead Chords at
STA 540 - Left Side
002A0003-166
$4,854.00420SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - LEFT SIDE
002A0003-167 (a)
$4,854.00550SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - RIGHT SIDE
002A0003-168 (b)
$5,543.00525SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - LEFT SIDE
002A0003-169 (c)
$5,543.00525SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - RIGHT SIDE
002A0003-170 (d)
$5,861.00525SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - LEFT SIDE
002A0003-171 (e)
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
37 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 38

REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the
Revision 2 date of
this Service Bulletin
(US Dollars)
ROLT as of the Revi-
sion 2 date of this
Service Bulletin (Cal-
endar Days)
NameKit Number
$5,861.00525SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - RIGHT SIDE
002A0003-172 (f)
$4,860.00525SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - LEFT SIDE
002A0003-173 (g)
$4,860.00550SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - RIGHT SIDE
002A0003-174 (h)
$5,754.00550SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - LEFT SIDE
002A0003-175 (i)
$4,325.00550SKIN REPAIR - LOWER
BULKHEAD CHORDS AT
STA 540 - RIGHT SIDE
002A0003-176 (j)
$4,059.00350SUPPLEMENTAL KIT, SKIN
REPAIR - LOWER BULK-
HEAD CHORDS AT STA 540
- LEFT SIDE
002A0003-177
$4,059.00550SUPPLEMENTAL KIT, SKIN
REPAIR - LOWER BULK-
HEAD CHORDS AT STA 540
- RIGHT SIDE
002A0003-178
$4,725.00350SUPPLEMENTAL KIT, SKIN
REPAIR - LOWER BULK-
HEAD CHORDS AT STA 540
- LEFT SIDE
002A0003-179
$4,725.00350SUPPLEMENTAL KIT, SKIN
REPAIR - LOWER BULK-
HEAD CHORDS AT STA 540
- RIGHT SIDE
002A0003-180
$4,458.00550SUPPLEMENTAL KIT, SKIN
REPAIR - LOWER BULK-
HEAD CHORDS AT STA 540
- LEFT SIDE
002A0003-181
$3,245.00550SUPPLEMENTAL KIT, SKIN
REPAIR - LOWER BULK-
HEAD CHORDS AT STA 540
- RIGHT SIDE
002A0003-182
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
38 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 39

REFER TO THE BOEING PART PAGE ON MYBOEINGFLEET.COM OR CONTACT FIRST RESPONDER
AT FR@BOEING.COM FOR THE LATEST REORDER LEAD TIME (ROLT) AND PRICE INFORMATION
Unit Price as of the
Revision 2 date of
this Service Bulletin
(US Dollars)
ROLT as of the Revi-
sion 2 date of this
Service Bulletin (Cal-
endar Days)
NameKit Number
(a) Kit 002A0003-167 replaces kit 002A0003-137. Supplemental kit 002A0003-177 plus kit 002A0003-
137 is equivalent to new kit 002A0003-167.
(b) Kit 002A0003-168 replaces kit 002A0003-138. Supplemental kit 002A0003-178 plus kit 002A0003-
138 is equivalent to new kit 002A0003-168.
(c) Kit 002A0003-169 replaces kit 002A0003-139. Supplemental kit 002A0003-179 plus kit 002A0003-
139 is equivalent to new kit 002A0003-169.
(d) Kit 002A0003-170 replaces kit 002A0003-140. Supplemental kit 002A0003-180 plus kit 002A0003-
140 is equivalent to new kit 002A0003-170.
(e) Kit 002A0003-171 replaces kit 002A0003-141. Supplemental kit 002A0003-179 plus kit 002A0003-
141 is equivalent to new kit 002A0003-171.
(f) Kit 002A0003-172 replaces kit 002A0003-142. Supplemental kit 002A0003-180 plus kit 002A0003-
142 is equivalent to new kit 002A0003-172.
(g) Kit 002A0003-173 replaces kit 002A0003-143. Supplemental kit 002A0003-177 plus kit 002A0003-
143 is equivalent to new kit 002A0003-173.
(h) Kit 002A0003-174 replaces kit 002A0003-144. Supplemental kit 002A0003-178 plus kit 002A0003-
144 is equivalent to new kit 002A0003-174.
(i) Kit 002A0003-175 replaces kit 002A0003-145. Supplemental kit 002A0003-181 plus kit 002A0003-
145 is equivalent to new kit 002A0003-175.
(j) Kit 002A0003-176 replaces kit 002A0003-146. Supplemental kit 002A0003-182 plus kit 002A0003-
146 is equivalent to new kit 002A0003-176.
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of February 1, 2008. For task
hour reimbursement for airplanes in warranty as of that date, send a warranty claim to Boeing Warranty
& Product Assurance Contracts. The splice installation kit(s) for the preventive modification of airplanes
in warranty as of that date will be supplied at no charge. If additional labor hours and/or skin repair
kit(s) or supplement kit, skin repair kit(s)/part(s) are required, send a claim to Boeing Warranty & Product
Assurance Contracts. Send a purchase order for the preventive modification kits to Boeing Material
Services. Please refer to this service bulletin number and reference the airplane variable numbers in
your purchase order.
C. Parts Necessary for Each Airplane
1. Kits/Parts
To get the kits/parts shown below, refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
39 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 40

NOTE: When no skin cracking is found on either side of the airplane, then two splice installation
top kits and the items shown in Paragraph 2.C.2., Parts and Materials Supplied by the
Operator, are necessary for each airplane.
When skin cracking is found on one side of the airplane, then one skin repair top kit and
two splice installation top kits and the items shown in Paragraph 2.C.2., Parts and Materials
Supplied by the Operator, are necessary for each airplane.
When skin cracking is found on both sides of the airplane, then two skin repair top kits
and two splice installation top kits and the items shown in Paragraph 2.C.2., Parts and
Materials Supplied by the Operator, are necessary for each airplane.
Group 1-2, 4-5:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-164
--Splice Installation - Section 11, Lower Bulk-
head Chords at STA 540 - Left Side
-002A0003-164
--UNPILOTED SPLICE PLATE - FRONT
SPAR, WING CENTER SECTION
1111A2203U3
(a)-BOLT, PROTRUDING HD8BACB30NX6K10X
--NUT, SELF-LOCK, HEX8BACN10YT3CD
(a) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
ALL
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-165
--Splice Installation - Section 11, Lower Bulk-
head Chords at STA 540 - Right Side
-002A0003-165
--UNPILOTED SPLICE PLATE - FRONT
SPAR, WING CENTER SECTION
1111A2203U4
(a)-BOLT, PROTRUDING HD8BACB30NX6K10X
--NUT, SELF-LOCK, HEX8BACN10YT3CD
(a) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
40 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 41

Group 3:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-166
--Splice Installation - Section 11, Lower Bulk-
head Chords at STA 540 - Left Side
-002A0003-166
--SPLICE PLATE - FRONT SPAR, WING
CENTER SECTION
1111A2203U5
(a)-BOLT, PROTRUDING HD8BACB30NX6K10X
--NUT, SELF-LOCK, HEX8BACN10YT3CD
(a) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Group 1:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-168-167
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-167
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-168
-143A0062-17 or
143A0062-27
DRAG LINK ASSY.1002A0003-183
-143A0062-18 or
143A0062-28
DRAG LINK ASSY1.002A0003-184
(b)-BOLT, PROTRUDING HD11BACB30MY8K10X
(b)-BOLT, PROTRUDING HD11BACB30MY8K11X
(a)-HEX DRIVE BOLT66BACB30NX10K10
(b)-BOLT, PROTRUDING HD55BACB30NX10K10X
--BOLT, PROTRUDING HD44BACB30NX6K11X
(b)-BOLT, PROTRUDING HD22BACB30NX6K6X
(b)-BOLT, PROTRUDING HD33BACB30NX6K7X
--BOLT, PROTRUDING HD44BACB30NX8K11
--BOLT, PROTRUDING HD22BACB30NX8K15
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
41 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 42

Group 1:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-168-167
(b)-BOLT, PROTRUDING HD22BACB30NX8K15X
--BOLT44BACB30VT6K6
(a)-HI-LOK77BACB30VT6K7
--BOLT22BACB30VT8K10
--BOLT11BACB30VT8K11
--BOLT, RADIUS LEAD-IN22BACB30WR4K11L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K11LX
--BOLT, RADIUS LEAD-IN11BACB30WR4K4L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K4LX
--BOLT, RADIUS LEAD-IN33BACB30WR4K5L
(b)-BOLT, RADIUS LEAD-IN22BACB30WR4K5LX
(a)-BOLT, RADIUS LEAD-IN2626BACB30WR4K7L
(b)-BOLT, HEX DRIVE1212BACB30WR4K7LX
(a)-BOLT, RADIUS LEAD-IN66BACB30WR4K9L
(b)-BOLT, RADIUS LEAD-IN33BACB30WR4K9LX
--COLLAR55BACC30BH10
--COLLAR22BACC30BH8
(a)-COLLAR1111BACC30BL6
--COLLAR22BACC30BL8
--COLLAR11BACC30BQ8
(a)-SELF-LOCKING NUT3838BACN10HY4M
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
--RIVET, UNIVERSAL HD22BACR15FT6AD8C
--RIVET, UNIVERSAL HD44BACR15FT6AD9C
--SOLID RIVET11BACR15FT6D11C
--RIVET11BACR15FT6D13C
(a)-RIVET8181BACR15FT6D5C
(a)-RIVET, UNIVERSAL HD4646BACR15FT6D6C
--RIVET, UNIVERSAL HD22BACR15FT6D7C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
42 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 43

Group 1:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-168-167
(b)-RIVET, UNIVERSAL HD22BACR15FT7AD8C
(b)-RIVET, UNIVERSAL HD44BACR15FT7AD9C
(b)-RIVET11BACR15FT7D11C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D13C
(b)-RIVET, UNIVERSAL HD44BACR15FT7D6C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D7C
--RIVET, 100 DEG44BACR15GF6D4
(BACR15GF6D5 or
BACR15GF6D6 or
BACR15GF6D7
optional)
--RIVET, 100 DEG33BACR15GF6D6
--RIVET, 100 DEG44BACR15GF6D7
(b)-RIVET, 100 DEG22BACR15GF7D7
(a) There are more parts than are necessary.
(b) These oversize fasteners are supplied as substitutes for the nominal diameter fasteners for use as
necessary.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Group 2:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-170-169
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-169
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-170
-143A0062-33DRAG LINK ASSY.1002A0003-189
-143A0062-34DRAG LINK ASSY1.002A0003-190
(b)-BOLT, PROTRUDING HD11BACB30MY12K11X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
43 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 44

Group 2:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-170-169
(b)-BOLT, PROTRUDING HD11BACB30MY8K10X
(a)-HEX DRIVE BOLT66BACB30NX10K10
(b)BOLT, PROTRUDING HD55BACB30NX10K10X
--BOLT, PROTRUDING HD44BACB30NX6K11X
(b)-BOLT, PROTRUDING HD22BACB30NX6K6X
(b)-BOLT, PROTRUDING HD33BACB30NX6K7X
--BOLT, PROTRUDING HD44BACB30NX8K11
--BOLT, PROTRUDING HD22BACB30NX8K15
(b)-BOLT, PROTRUDING HD22BACB30NX8K15X
--BOLT, PROTRUDING HD11BACB30VT12K11
--BOLT44BACB30VT6K6
(a)-HI-LOK77BACB30VT6K7
--BOLT33BACB30VT8K10
--BOLT, RADIUS LEAD-IN22BACB30WR4K11L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K11LX
--BOLT, RADIUS LEAD-IN11BACB30WR4K4L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K4LX
--BOLT, RADIUS LEAD-IN33BACB30WR4K5L
(b)-BOLT, RADIUS LEAD-IN22BACB30WR4K5LX
(a)-BOLT, RADIUS LEAD-IN2626BACB30WR4K7L
(b)-BOLT, HEX DRIVE1212BACB30WR4K7LX
(a)-BOLT, RADIUS LEAD-IN66BACB30WR4K9L
(b)-BOLT, RADIUS LEAD-IN33BACB30WR4K9LX
--COLLAR ASSEMBLY11BACC30AG12
--COLLAR55BACC30BH10
--COLLAR22BACC30BH8
(a)-COLLAR1111BACC30BL6
--COLLAR22BACC30BL8
--COLLAR ASSEMBLY11BACC30BQ12
(a)-SELF-LOCKING NUT3838BACN10HY4M
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
44 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 45

Group 2:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-170-169
(b)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
--RIVET, UNIVERSAL HD22BACR15FT6AD8C
--RIVET, UNIVERSAL HD44BACR15FT6AD9C
--SOLID RIVET11BACR15FT6D11C
--RIVET11BACR15FT6D13C
(a)-RIVET8181BACR15FT6D5C
(a)-RIVET, UNIVERSAL HD4646BACR15FT6D6C
--RIVET, UNIVERSAL HD22BACR15FT6D7C
(b)-RIVET, UNIVERSAL HD22BACR15FT7AD8C
(b)-RIVET, UNIVERSAL HD44BACR15FT7AD9C
(b)-RIVET11BACR15FT7D11C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D13C
(b)-RIVET, UNIVERSAL HD44BACR15FT7D6C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D7C
--RIVET, 100 DEG44BACR15GF6D4
(BACR15GF6D5 or
BACR15GF6D6 or
BACR15GF6D7
optional)
--RIVET, 100 DEG33BACR15GF6D6
--RIVET, 100 DEG44BACR15GF6D7
(b)-RIVET, 100 DEG22BACR15GF7D7
(a) There are more parts than are necessary.
(b) These oversize fasteners are supplied as substitutes for the nominal diameter fasteners for use as
necessary.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
45 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 46

Group 3:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-172-171
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-171
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-172
-142A0044-1DRAG LINK ASSY.1002A0003-189
-143A0062-34DRAG LINK ASSY1.002A0003-190
(b)-BOLT, PROTRUDING HD11BACB30MY12K11X
(b)-BOLT, PROTRUDING HD11BACB30MY8K10X
--BOLT, PROTRUDING HD44BACB30NX6K11X
(b)-BOLT, PROTRUDING HD22BACB30NX6K6X
(b)-BOLT, PROTRUDING HD33BACB30NX6K7X
--BOLT, PROTRUDING HD44BACB30NX8K11
--BOLT, PROTRUDING HD11BACB30VT12K11
--BOLT44BACB30VT6K6
(a)-HI-LOK77BACB30VT6K7
--BOLT22BACB30VT8K10
-BOLT, RADIUS LEAD-IN22BACB30WR4K11L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K11LX
--BOLT, RADIUS LEAD-IN11BACB30WR4K4L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K4LX
--BOLT, RADIUS LEAD-IN33BACB30WR4K5L
(b)-BOLT, RADIUS LEAD-IN22BACB30WR4K5LX
(a)-BOLT, RADIUS LEAD-IN2626BACB30WR4K7L
(b)-BOLT, HEX DRIVE1212BACB30WR4K7LX
(a)-BOLT, RADIUS LEAD-IN66BACB30WR4K9L
(b)-BOLT, RADIUS LEAD-IN33BACB30WR4K9LX
--BOLT, HEX DRIVE66BACB30YK10K10
(b)-BOLT, HEX DRIVE55BACB30YK10K10X
--BOLT, HEX DRIVE22BACB30YK8K15
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
46 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 47

Group 3:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-172-171
(b)-BOLT22BACB30YK8K15X
--COLLAR ASSEMBLY11BACC30AG12
(a)-COLLAR1111BACC30BL6
--COLLAR22BACC30BL8
--COLLAR ASSEMBLY11BACC30BQ12
--COLLAR, PRELOAD55BACC30CP10C
--COLLAR, PRELOAD22BACC30CP8C
(a)-SELF-LOCKING NUT3838BACN10HY4M
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
--RIVET, UNIVERSAL HD22BACR15FT6AD8C
--RIVET, UNIVERSAL HD44BACR15FT6AD9C
--SOLID RIVET11BACR15FT6D11C
--RIVET11BACR15FT6D13C
(a)-RIVET8181BACR15FT6D5C
(a)-RIVET, UNIVERSAL HD4646BACR15FT6D6C
--RIVET, UNIVERSAL HD22BACR15FT6D7C
(b)-RIVET, UNIVERSAL HD22BACR15FT7AD8C
(b)-RIVET, UNIVERSAL HD44BACR15FT7AD9C
(b)-RIVET11BACR15FT7D11C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D13C
(b)-RIVET, UNIVERSAL HD44BACR15FT7D6C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D7C
--RIVET, 100 DEG44BACR15GF6D4
(BACR15GF6D5 or
BACR15GF6D6 or
BACR15GF6D7
optional)
--RIVET, 100 DEG33BACR15GF6D6
--RIVET, 100 DEG44BACR15GF6D7
(b)-RIVET, 100 DEG22BACR15GF7D7
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
47 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 48

Group 3:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-172-171
(a) There are more parts than are necessary.
(b) These oversize fasteners are supplied as substitutes for the nominal diameter fasteners for use as
necessary.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Group 4:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-174-173
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-173
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-174
-143A0062-21 or
143A0062-27
DRAG LINK ASSY.1002A0003-183
-143A0062-22 or
143A0062-28
DRAG LINK ASSY1.002A0003-184
(b)-BOLT, PROTRUDING HD11BACB30MY10K11X
(b)-BOLT, PROTRUDING HD11BACB30MY8K10X
(a)-HEX DRIVE BOLT66BACB30NX10K10
(b)-BOLT, PROTRUDING HD55BACB30NX10K10X
--BOLT, PROTRUDING HD44BACB30NX6K11X
(b)-BOLT, PROTRUDING HD22BACB30NX6K6X
(b)-BOLT, PROTRUDING HD33BACB30NX6K7X
--BOLT, PROTRUDING HD44BACB30NX8K11
--BOLT, PROTRUDING HD22BACB30NX8K15
(b)-BOLT, PROTRUDING HD22BACB30NX8K15X
--BOLT, PROTRUDING HD11BACB30VT10K11
--BOLT44BACB30VT6K6
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
48 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 49

Group 4:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-174-173
(a)-HI-LOK77BACB30VT6K7
--BOLT22BACB30VT8K10
--BOLT, RADIUS LEAD-IN22BACB30WR4K11L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K11LX
--BOLT, RADIUS LEAD-IN11BACB30WR4K4L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K4LX
--BOLT, RADIUS LEAD-IN33BACB30WR4K5L
(b)-BOLT, RADIUS LEAD-IN22BACB30WR4K5LX
(a)-BOLT, RADIUS LEAD-IN2626BACB30WR4K7L
(b)-BOLT, HEX DRIVE1212BACB30WR4K7LX
(a)-BOLT, RADIUS LEAD-IN66BACB30WR4K9L
(b)-BOLT, RADIUS LEAD-IN33BACB30WR4K9LX
--COLLAR55BACC30BH10
--COLLAR22BACC30BH8
(a)-COLLAR1111BACC30BL6
--COLLAR22BACC30BL8
--COLLAR ASSEMBLY11BACC30BQ10
(a)-SELF-LOCKING NUT3838BACN10HY4M
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
--RIVET, UNIVERSAL HD22BACR15FT6AD8C
--RIVET, UNIVERSAL HD44BACR15FT6AD9C
--SOLID RIVET11BACR15FT6D11C
--RIVET11BACR15FT6D13C
(a)-RIVET8181BACR15FT6D5C
(a)-RIVET, UNIVERSAL HD4646BACR15FT6D6C
--RIVET, UNIVERSAL HD22BACR15FT6D7C
(b)-RIVET, UNIVERSAL HD22BACR15FT7AD8C
(b)-RIVET, UNIVERSAL HD44BACR15FT7AD9C
(b)-RIVET11BACR15FT7D11C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
49 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 50

Group 4:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-174-173
(b)-RIVET, UNIVERSAL HD11BACR15FT7D13C
(b)-RIVET, UNIVERSAL HD44BACR15FT7D6C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D7C
--RIVET, 100 DEG44BACR15GF6D4
(BACR15GF6D5 or
BACR15GF6D6 or
BACR15GF6D7
optional)
--RIVET, 100 DEG33BACR15GF6D6
--RIVET, 100 DEG44BACR15GF6D7
(b)-RIVET, 100 DEG22BACR15GF7D7
(a) There are more parts than are necessary.
(b) These oversize fasteners are supplied as substitutes for the nominal diameter fasteners for use as
necessary.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Group 5:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-176-175
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-175
(c)-TOP KIT - RETROFIT - SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-176
-143A0062-37DRAG LINK ASSY.1002A0003-195
-143A0062-38DRAG LINK ASSY1.002A0003-196
(b)-BOLT, PROTRUDING HD11BACB30MY8K10X
--BOLT, PROTRUDING HD44BACB30NX6K11X
(b)-BOLT, PROTRUDING HD22BACB30NX6K6X
(b)-BOLT, PROTRUDING HD33BACB30NX6K7X
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
50 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 51

Group 5:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-176-175
--BOLT, PROTRUDING HD44BACB30NX8K11
--BOLT44BACB30VT6K6
(a)-HI-LOK77BACB30VT6K7
--BOLT22BACB30VT8K10
--BOLT, RADIUS LEAD-IN22BACB30WR4K11L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K11LX
--BOLT, RADIUS LEAD-IN11BACB30WR4K4L
(b)-BOLT, RADIUS LEAD-IN11BACB30WR4K4LX
--BOLT, RADIUS LEAD-IN33BACB30WR4K5L
(b)-BOLT, RADIUS LEAD-IN22BACB30WR4K5LX
(a)-BOLT, RADIUS LEAD-IN1919BACB30WR4K7L
(b)-BOLT, HEX DRIVE99BACB30WR4K7LX
(a)-BOLT, RADIUS LEAD-IN1313BACB30WR4K9L
(b)-BOLT, RADIUS LEAD-IN66BACB30WR4K9LX
(a)-BOLT, HEX DRIVE66BACB30YK10K10
(b)-BOLT, HEX DRIVE55BACB30YK10K10X
--BOLT, HEX DRIVE22BACB30YK8K15
(b)-BOLT22BACB30YK8K15X
--BOLT, HEX DRIVE11BACB30YL10K11
(b)-BOLT, HEX DRIVE11BACB30YL10K11X
(a)-COLLAR1111BACC30BL6
--COLLAR22BACC30BL8
--COLLAR, PRELOAD55BACC30CP10C
--COLLAR, PRELOAD22BACC30CP8C
(a)-SELF-LOCKING NUT3838BACN10HY4M
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
--RIVET, UNIVERSAL HD22BACR15FT6AD8C
--RIVET, UNIVERSAL HD44BACR15FT6AD9C
--SOLID RIVET11BACR15FT6D11C
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
51 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 52

Group 5:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-176-175
--RIVET11BACR15FT6D13C
(a)-RIVET8181BACR15FT6D5C
(a)-RIVET, UNIVERSAL HD4646BACR15FT6D6C
--RIVET, UNIVERSAL HD22BACR15FT6D7C
(b)-RIVET, UNIVERSAL HD22BACR15FT7AD8C
(b)-RIVET, UNIVERSAL HD22BACR15FT7AD9C
(b)-RIVET11BACR15FT7D11C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D13C
(b)-RIVET, UNIVERSAL HD44BACR15FT7D6C
(b)-RIVET, UNIVERSAL HD11BACR15FT7D7C
--RIVET, 100 DEG44BACR15GF6D4
(BACR15GF6D5 or
BACR15GF6D6 or
BACR15GF6D7
optional)
--RIVET, 100 DEG33BACR15GF6D6
--RIVET, 100 DEG44BACR15GF6D7
(b)-RIVET, 100 DEG22BACR15GF7D7
--COLLAR11HL75-10AW
(a) There are more parts than are necessary.
(b) These oversize fasteners are supplied as substitutes for the nominal diameter fasteners for use as
necessary.
(c) If grip length shown is not available at Boeing, fasteners supplied in kits may be one grip length longer
than indicated. Also, if any fasteners part numbers listed are not available or have been superseded,
substitute fasteners may be supplied in kits.
Group 1, 4:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-178-177
--SUPPLEMENTAL KIT, SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-177
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
52 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 53

Group 1, 4:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-178-177
--SUPPLEMENTAL KIT, SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-178
--DRAG LINK ASSY.1002A0003-183
--DRAG LINK ASSY1.002A0003-184
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
(a) There are more parts than are necessary.
Group 2-3:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-180-179
--SUPPLEMENTAL KIT, SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-179
--SUPPLEMENTAL KIT, SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-180
--DRAG LINK ASSY.1002A0003-189
--DRAG LINK ASSY1.002A0003-190
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
(a) There are more parts than are necessary.
Group 5:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-182-181
--SUPPLEMENTAL KIT, SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - LEFT SIDE
.-002A0003-181
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
53 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 54

Group 5:
Kit 002A0003
NotesExisting Part
Number
NameQtyNew Part Number
-182-181
--SUPPLEMENTAL KIT, SKIN REPAIR -
LOWER BULKHEAD CHORDS AT STA
540 - RIGHT SIDE
-.002A0003-182
--DRAG LINK ASSY.1002A0003-195
--DRAG LINK ASSY1.002A0003-196
(a)-NUT, SELF-LOCK, HEX1313BACN10YT3CD
--NUT, SELF-LOCK, HEX44BACN10YT4CD
(a) There are more parts than are necessary.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number / Specification
Dimensions: 13.6 x 10.4 inches (b)DOUBLER1 (a)2024-T3 clad sheet 0.032 inch
thick Dimensions: 31.6 x 5.0 inches (b)FILLER 21 (a)
Dimensions: 11.6 x 9.0 (b)TRIPLER1 (a)2024-T3 clad sheet 0.063 inch
thick Dimensions: 31.0 x 3.0 (b)FILLER 31 (a)
Dimensions: 3.2 x 0.8 inches (b)FILLER 11 (a)2024-T3 clad sheet 0.071 or
0.080 inch thick (c)
Dimensions: 9.8 x 1.5 inches (b)FILLER 51 (a)2024-T3 clad sheet 0.080 inch
thick
Dimensions: 7.0 x 1.5 inches (b)FILLER 41 (a)2024-T3 clad sheet 0.095 inch
thick minimum (d)
(e)SECONDARY FUEL BARRI-
ER SEALANT, 2 PART
POLYURETHANE
4ozBMS 5-81, Type II
(e)PRESSURE AND ENVIRON-
MENTAL SEALANT
16ozBMS 5-95, Type I, Class B
(e)LOW DENSITY SEALANT8ozBMS 5-142, TYPE II, CLASS B
(e)PRIMER8ozBMS 10-11, TYPE I
(e)CORROSION INHIBITING
COMPOUND (CIC)
10ozBMS 3-23, Type II
(e)FUEL TANK SEALANT8ozBMS 5-45, Class B
(f)CHEMICAL CONVERSION
COATING
6ozType 2, Class A
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
54 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 55

NotesNameQTYPart Number / Specification
(a) One part is required for each side of the airplane where a skin repair is installed.
(b) The dimensions given are for the skin repair parts and crack location shown in this service bulletin. If
the crack is at a different location it may be necessary to extend the repair.
(c) Thickness to match existing skin thickness.
(d) Alternatively use 0.032 and minimum 0.063 inch thick 2024-T3 clad sheet.
(e) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
(f) Refer to SOPM 20-43-03 for material sources.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
The 737 Structural Repair Manual Subject 51-40-09 gives data about cold working tools and sleeves
necessary to do the work given in this service bulletin. These tools are available from industry sources.
Engineering, service, and a kit of cold working tools made for this change are available from Fatigue
Technology, Inc. or West Coast Industries, Inc.
• Refer To: FTI Kit Number: FTI-737-53-1294-1
Fatigue Technology, Inc.
P.O. Box C-88388
Seattle, WA 98188 USA
Phone Number (206) 246-2010
Fax (206) 244-9886
• Refer To: WCI Kit Number: WCI-737-53-1294
West Coast Industries, Inc.
14900 Whitman Avenue North
Seattle, WA 98133-6532 USA
Phone Number (206) 365-7513
Fax (206) 365-7483
F. Special Tooling Necessary to do this Service Bulletin
Cold working tools are necessary to do the change given in this service bulletin. To get the cold working
tools, refer to Paragraph 2.E., Special Tooling - Price and Availability.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
55 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 56

Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
56 of 273
BOEING SERVICE BULLETIN 737-53-1294
BLANK PAGE

### Page 57

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque Values:
— Values for structural fasteners are given in 737 Structural Repair Manual,
Chapter 51.
— Values for airframe maintenance tasks are included in Chapter 20 of737
Aircraft Maintenance Manual (AMM).
4. Use the approved fastener, process and material substitutions in accordance with
SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate
full threaded fasteners (screws) needed for installation in this service bulletin.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
57 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 58

8. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. Refer to APPENDIX A for forming and fitting requirements for detail metal parts.
10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Some Boeing parts are supplied in a temporary configuration. Those parts are
identified with a 'U', 'W', or 'Y' in place of the '-' (dash) in the part number. It is
permitted to install parts identified with a 'U', 'W', or 'Y' as an alternative to the '-'
(dash) part number. Boeing Drawing 005W0900 contains more data.
12. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS
are in Paragraph 1.E., Compliance.
B. WORK INSTRUCTIONS
1. PART 1 - INSPECTION
a. Remove the wing-to-body fairings 192BL and 192BR at STA 540 to get access to the lower
skin of the wing center section. Refer to 737-600/700/800/900 AMM 06-41-00.
b. Remove left and right ram air ducts. Refer to 737-600/700/800/900 AMM 21-51-24 as an
accepted procedure.
c. Do a detailed inspection and a High Frequency Eddy Current (HFEC) inspection of the skin
for cracks at STA 540 in the area common to the STA 540 bulkhead chord fasteners between
stringer S-22 and S-23 in accordance with FIGURE 1 and FIGURE 2.
(1) If any crack is found in the skin between S-22L and S-23L and no crack is found in the
skin between S-22R and S-23R, install a skin repair in accordance with PART 4 - SKIN
REPAIR - LEFT SIDE and a preventive modification in accordance with PART 3 -
PREVENTIVE MODIFICATION - RIGHT SIDE.
(2) If any crack is found in the skin between S-22R and S-23R and no crack is found in the
skin between S-22L and S-23L, install a skin repair in accordance with PART 5 - REPAIR
- SKIN RIGHT SIDE and a preventive modification in accordance with PART 2 -
PREVENTIVE MODIFICATION - LEFT SIDE.
(3) If any crack is found in the skin between S-22L and S-23L and any crack is found in the
skin between S-22R and S-23R, install a skin repair in accordance with PART 4 - SKIN
REPAIR - LEFT SIDE and a skin repair in accordance with PART 5 - SKIN REPAIR -
RIGHT SIDE.
(4) If no crack is found, do one of the following below:
(a) Repeat detailed inspection and a High Frequency Eddy Current (HFEC) inspection
of the skin for cracks at STA 540 at the repeat interval in Paragraph 1.E., Compliance.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
58 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 59

NOTE: Installation of the preventive modification or skin repair in accordance with
Work Instructions, Paragraph3.B., PART 2 or PART 4 on the left side of the
airplane and PART 3 or PART 5 on the right side of the airplane terminates
this requirement for repeat inspections.
OR
(b) Install the preventive modification in accordance with PART 2 - PREVENTIVE
MODIFICATION - LEFT SIDE and PART 3 - PREVENTIVE MODIFICATION - RIGHT
SIDE.
2. PART 2 - PREVENTIVE MODIFICATION - LEFT SIDE
a. Remove the lining from the aft bulkhead of the forward cargo hold to get access to STA 540
bulkhead chords. Refer to 737-600/700/800/900 AMM 25-52-17 as an accepted procedure.
b. Remove the left recirculation fan. Refer to 737-600/700/800/900 AMM 21-25-02 as an accepted
procedure.
c. If the left filter housing exists, then displace the left filter housing. Refer to 737-600/700/800/900
AMM 21-25-02.
d. Remove fasteners from the STA 540 bulkhead chords between stringer S-22L and S-23L and
do an open hole High Frequency Eddy Current (HFEC) inspection for cracks in accordance
with FIGURE 3.
(1) If any crack is found in the skin only, install a skin repair in accordance with PART 4 -
SKIN REPAIR - LEFT SIDE.
(2) If any crack is found in the bulkhead chords, contact The Boeing Company for repair
instructions and do the repair.
(3) If no crack is found, continue with the preventive modification below.
e. Group 1-2, 4-5:
Prepare the splice for installation in accordance with FIGURE 4.
(1) If there is not enough clearance to drill the splice, trim the flange for the stringer S-22L
in accordance with FIGURE 11.
f. Group 1-2, 4-5:
Install the splice in accordance with FIGURE 5.
g. Group 3:
Prepare the splice for installation in accordance with FIGURE 6.
(1) If there is not enough clearance to drill the splice, trim the flange for the stringer S-22L
in accordance with FIGURE 11.
h. Group 3:
Install the splice in accordance with FIGURE 7.
3. PART 3 - PREVENTIVE MODIFICATION - RIGHT SIDE
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
59 of 273
BOEING SERVICE BULLETIN 737-53-1294

### Page 60

a. Remove the lining from the aft bulkhead of the forward cargo hold to get access to STA 540
bulkhead chords. Refer to 737-600/700/800/900 AMM 25-52-17 as an accepted procedure.
b. Remove the right recirculation fan. Refer to 737-600/700/800/900 AMM 21-25-02 as an
accepted procedure.
c. Displace the right filter housing. Refer to 737-600/700/800/900 AMM 21-25-02.
d. Remove fasteners from the STA 540 bulkhead chords between stringer S-22R and S-23R
and do an open hole High Frequency Eddy Current (HFEC) inspection for cracks in accordance
with FIGURE 8.
(1) If any crack is found in the skin only, install a skin repair in accordance with PART 5 -
SKIN REPAIR - RIGHT SIDE.
(2) If any crack is found in the bulkhead chords, contact The Boeing Company for repair
instructions and do the repair.
(3) If no crack is found, continue with the preventive modification below.
e. Prepare the splice for installation in accordance with FIGURE 9.
(1) If there is not enough clearance to drill the splice, trim the flange for the stringer S-22R
in accordance with FIGURE 12.
f. Install the splice in accordance with FIGURE 10.
4. PART 4 - SKIN REPAIR - LEFT SIDE
a. Remove the lining from the aft bulkhead of the forward cargo hold to get access to STA 540
bulkhead chords. Refer to 737-600/700/800/900 AMM 25-52-17 as an accepted procedure.
b. Remove the wing-to-body fairing 191FL to get access to the skin above S-22 and the drag
link. Refer to 737-600/700/800/900 AMM 06-41-00.
c. Get access to the center fuel tank. Refer to 737-600/700/800/900 AMM 28-11-31 as an
accepted procedure.
d. Cut out the crack in accordance with FIGURE 13.
(1) If cracking cannot be fully removed in accordance with the limits in FIGURE 13, contact
The Boeing Company for repair instructions and do the repair.
e. Do an open hole HFEC inspection for skin and chord cracking at the fastener locations common
to and surrounding the cut-out in accordance with FIGURE 14.
(1) If any cracking is found, contact The Boeing Company for repair instructions and do the
repair.
f. Remove existing drag link assembly in accordance with FIGURE 15.
g. Make doubler, tripler and fillers in accordance with FIGURE 16.
Export Controlled ECCN: 9E991 - BOEING
PROPRIETARY - Copyright © Unpublished
Work - See page 1 for details.
Original Issue: March 31, 2011
737-53-1294Revision 2: December 09, 2015
60 of 273
BOEING SERVICE BULLETIN 737-53-1294

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-53-1294/file/eb59457bf8ea.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
