# Boeing Service Bulletin 737-53-1310: Revision 1, part 1 of 3

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-1367, the docket of a proposed AD (Federal Register 2025-13920). Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 737-53-1310](https://openairdocs.org/service-documents/boeing/sb-737-53-1310.md)
- Title as filed: SB-737-53-1310 Rev 1_Part1
- Pages: 272
- PDF: https://openairdocs.org/files/sha256/97/c3/97c3a873e1ec6e240ae524aede507e9cbe4fbeaf15cde0d7c9251f47bb1c3910
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1310/file/97c3a873e1ec

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1310
Original Issue: October 20, 2011
Revision 1: May 22, 2024
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-Mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
EXPORT CONTROLLED - This technology or software is subject to the U.S. Export Administration Regulations
(EAR), (15 C.F.R. Parts 730-774). No authorization from the U.S. Department of Commerce is required for
export, re-export, in-country transfer, or access EXCEPT to country group E:1 or E:2 countries/persons per
Supp.1 to Part 740 of the EAR.
9E991ECCN:
BOEING PROPRIETARY
Copyright © 2024 The Boeing Company
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document
are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The
Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and
Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
1 of 510
4.0

### Page 2

Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
2 of 510
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 3

Table of Contents
Revision Transmittal Sheet ............................................ 9
S u m m a r y  ..................................................... 1 3
1. PLANNING INFORMATION ........................................ 1 7
A . E f f e c t i v i t y  ............................................... 1 7
1. Airplanes ............................................ 1 7
2 . S p a r e s  A f f e c t e d  ........................................ 2 1
B. Concurrent Requirements ...................................... 2 1
C. Reason ................................................ 2 1
D. Description .............................................. 2 2
E. Compliance .............................................. 2 2
F . A p p r o v a l  ............................................... 6 1
G. Manpower .............................................. 6 2
H. Weight and Balance Changes .................................... 9 1
I. Electrical Load Data ......................................... 9 6
J . R e f e r e n c e s  .............................................. 9 6
1. Existing Data: ......................................... 9 6
2. Data Supplied with this Service Bulletin: ........................... 9 7
3. Installation Drawings Used in the Preparation of this Service Bulletin: ........... 9 7
K. Publications Affected ........................................ 9 7
L. Interchangeability and Intermixability of Parts ........................... 9 7
M. Software Accomplishment Summary ................................ 9 7
2. MATERIAL INFORMATION ........................................ 9 9
A. Material - Price and Availability ................................... 9 9
B. Industry Support Information .................................... 9 9
C. Parts Necessary for Each Airplane ................................. 9 9
1 . K i t s / P a r t s  ............................................ 9 9
2. Parts and Materials Supplied by the Operator ........................ 9 9
3. Parts Modified and Reidentified ............................... 1 1 3
4. Parts Removed and Not Replaced .............................. 1 1 3
D. Parts Necessary to Change Spares ................................ 1 1 3
E. Special Tooling - Price and Availability .............................. 1 1 3
F. Special Tooling Necessary to do this Service Bulletin ...................... 1 1 3
3. ACCOMPLISHMENT INSTRUCTIONS ................................. 1 1 5
A. GENERAL INFORMATION .................................... 1 1 5
B. WORK INSTRUCTIONS ...................................... 1 1 6
FIGURE 1: FIGURE LAYOUT MAP - 737-700 AIRPLANES [Group 1-5] ................ 1 2 5
FIGURE 2: FIGURE LAYOUT MAP - 737-700 AIRPLANES WITH INCREASED GROSS WEIGHT (IGW)
[Group 6-7] .......................................... 1 2 8
FIGURE 3: FIGURE LAYOUT MAP - 737-700C AIRPLANES [Group 8] ................ 1 3 0
FIGURE 4: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - CHEM-MILL STEP INSPECTION
[Group 1-7] .......................................... 1 3 2
FIGURE 5: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - INTERNAL MODIFICATION [Group
1 - 7 ]  ............................................... 1 3 4
FIGURE 6: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - POST MODIFICATION INSPECTION
A T  O U T E R  F A S T E N E R  R O W S  [ G r o u p  1 - 7 ]  ........................ 1 4 2
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
3 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 4

FIGURE 7: FUSELAGE - SKIN - FORWARD ENTRY DOOR AREA - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 1-7] .............................. 1 4 6
FIGURE 8: FUSELAGE - SKIN - MAIN DECK CARGO AREA - CHEM-MILL STEP INSPECTION [Group
8 ]  ................................................ 1 5 0
FIGURE 9: FUSELAGE - SKIN - MAIN DECK CARGO AREA - INTERNAL MODIFICATION [Group 8] . 152
FIGURE 10: FUSELAGE - SKIN - MAIN DECK CARGO AREA - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 8] ............................ 1 5 9
FIGURE 11: FUSELAGE - SKIN - MAIN DECK CARGO AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 8] ................................. 1 6 1
FIGURE 12: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - CHEM-MILL STEP INSPECTION
[Group 1-7] .......................................... 1 6 3
FIGURE 13: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - INTERNAL MODIFICATION [Group
1 - 7 ]  ............................................... 1 6 5
FIGURE 14: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-7] ................ 1 6 9
FIGURE 15: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-7] ...................... 1 7 1
FIGURE 16: FUSELAGE - SKIN - TCAS ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 1 7 3
FIGURE 17: FUSELAGE - SKIN - TCAS ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 175
FIGURE 18: FUSELAGE - SKIN - TCAS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 1 8 0
FIGURE 19: FUSELAGE - SKIN - TCAS ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 1 8 2
FIGURE 20: FUSELAGE - SKIN - ATC ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 1 8 4
FIGURE 21: FUSELAGE - SKIN - ATC ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 186
FIGURE 22: FUSELAGE - SKIN - ATC ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 1 9 7
FIGURE 23: FUSELAGE SKIN - ATC ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 2 0 2
FIGURE 24: FUSELAGE - SKIN - TACAN ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 2 0 7
FIGURE 25: FUSELAGE - SKIN - TACAN ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 209
FIGURE 26: FUSELAGE - SKIN - TACAN ANTENNA AREA - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 1-7] .......................... 2 1 4
FIGURE 27: FUSELAGE - SKIN - TACAN ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 2 1 6
FIGURE 28: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - CHEM-MILL STEP INSPECTION
[Group 1-7] .......................................... 2 1 8
FIGURE 29: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - INTERNAL MODIFICATION [Group
1 - 7 ]  ............................................... 2 2 0
FIGURE 30: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS [Group 1-7] ........................ 2 3 0
FIGURE 31: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 1-7] .............................. 2 3 4
FIGURE 32: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - CHEM-MILL STEP INSPECTION
................................................. 2 3 8
FIGURE 33: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - INTERNAL MODIFICATION . 240
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
4 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 5

FIGURE 34: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - POST MODIFICATION INSPECTION
A T  O U T E R  F A S T E N E R  R O W S ............................... 2 5 0
FIGURE 35: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP .................................... 2 5 4
FIGURE 36: FUSELAGE - SKIN - GPS ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 2 5 8
FIGURE 37: FUSELAGE - SKIN - GPS ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 260
FIGURE 38: FUSELAGE - SKIN - GPS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 2 6 9
FIGURE 39: FUSELAGE - SKIN - GPS ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 2 7 1
FIGURE 40: FUSELAGE - SKIN - MLS ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 2 7 3
FIGURE 41: FUSELAGE - SKIN - MLS ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 275
FIGURE 42: FUSELAGE - SKIN - MLS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 2 8 0
FIGURE 43: FUSELAGE - SKIN - MLS ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 2 8 2
FIGURE 44: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - CHEM-MILL STEP
INSPECTION [Group 1-3, 5] ................................. 2 8 4
FIGURE 45: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - INTERNAL
MODIFICATION [Group 1-3, 5] ................................ 2 8 6
FIGURE 46: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-3, 5] ............... 2 9 1
FIGURE 47: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-3, 5] .................... 2 9 3
FIGURE 48: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - CHEM-MILL STEP
INSPECTION [Group 4] .................................... 2 9 5
FIGURE 49: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - INTERNAL
MODIFICATION [Group 4] .................................. 2 9 7
FIGURE 50: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 4] .................. 3 0 7
FIGURE 51: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 4] ....................... 3 1 2
FIGURE 52: FUSELAGE - SKIN - ELT ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-5]
................................................. 3 1 7
FIGURE 53: FUSELAGE - SKIN - ELT ANTENNA LOCATION - INTERNAL MODIFICATION [Group 1-5]
................................................. 3 1 9
FIGURE 54: FUSELAGE - SKIN - ELT ANTENNA LOCATION - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 1-5] .......................... 3 2 4
FIGURE 55: FUSELAGE - SKIN - ELT ANTENNA LOCATION - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-5] ................................ 3 2 6
FIGURE 56: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - CHEM-MILL
STEP INSPECTION [Group 1-2, 5] ............................. 3 2 8
FIGURE 57: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - INTERNAL
AND EXTERNAL MODIFICATION [Group 1-2, 5] ...................... 3 3 0
FIGURE 58: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 1-2, 5] ...... 3 4 0
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
5 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 6

FIGURE 59: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 1-2, 5] ........... 3 4 5
FIGURE 60: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE -
CHEM-MILL STEP INSPECTION [Group 1-2, 5] ...................... 3 4 8
FIGURE 61: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE - INTERNAL
AND EXTERNAL MODIFICATION [Group 1-2, 5] ...................... 3 5 0
FIGURE 62: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 1-2, 5] ...... 3 6 0
FIGURE 63: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 1-2, 5] ........... 3 6 5
FIGURE 64: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE -
CHEM-MILL STEP INSPECTION [Group 3-4] ........................ 3 6 8
FIGURE 65: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE - INTERNAL
AND EXTERNAL MODIFICATION [Group 3-4] ....................... 3 7 0
FIGURE 66: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 3-4] ....... 3 8 0
FIGURE 67: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 3-4] ............ 3 8 5
FIGURE 68: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE -
CHEM-MILL STEP INSPECTION [Group 3-4] ........................ 3 8 8
FIGURE 69: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE -
INTERNAL AND EXTERNAL MODIFICATION [Group 3-4] ................ 3 9 0
FIGURE 70: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 3-4] ....... 4 0 0
FIGURE 71: FUSELAGE - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 3-4] ............ 4 0 5
FIGURE 72: FUSELAGE - SKIN - ADF ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-5]
................................................. 4 0 8
FIGURE 73: FUSELAGE - SKIN - ADF ANTENNA AREA - INTERNAL MODIFICATION [Group 1-5] . 410
FIGURE 74: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-5] ............................... 4 2 1
FIGURE 75: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-5] ................................ 4 2 6
FIGURE 76: FUSELAGE - SKIN - ADF ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-5]
................................................. 4 3 1
FIGURE 77: FUSELAGE - SKIN - ADF ANTENNA AREA - INTERNAL MODIFICATION [Group 1-5] . 433
FIGURE 78: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-5] ............................... 4 4 2
FIGURE 79: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-5] ................................ 4 4 6
FIGURE 80: FUSELAGE - SKIN - ADF ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 6-8]
................................................. 4 5 0
FIGURE 81: FUSELAGE - SKIN - ADF ANTENNA AREA - INTERNAL MODIFICATION [Group 6-8] . 452
FIGURE 82: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 6-8] ............................... 4 5 7
FIGURE 83: FUSELAGE - SKIN - ADF ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 6-8] ................................ 4 5 9
FIGURE 84: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - CHEM-MILL STEP INSPECTION
[Group 2-6, 8] ......................................... 4 6 1
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
6 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 7

FIGURE 85: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - INTERNAL MODIFICATION [Group
5 ]  ................................................ 4 6 3
FIGURE 86: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS [Group 5] .......................... 4 7 2
FIGURE 87: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 5] ............................... 4 7 4
FIGURE 88: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - INTERNAL MODIFICATION [Group
2 - 4 ,  6 ,  8 ]  ............................................ 4 7 6
FIGURE 89: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS [Group 2-4, 6, 8] ...................... 4 8 5
FIGURE 90: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 2-4, 6, 8] ........................... 4 8 7
FIGURE 91: FUSELAGE - SKIN - ELT ANTENNA AREA - CHEM-MILL STEP INSPECTION ..... 4 8 9
FIGURE 92: FUSELAGE - SKIN - ELT ANTENNA AREA - INTERNAL MODIFICATION [Group 2-6, 8] . 491
FIGURE 93: FUSELAGE - SKIN - ELT ANTENNA LOCATION - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 2-6, 8] ......................... 4 9 6
FIGURE 94: FUSELAGE - SKIN - ELT ANTENNA LOCATION - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 2-6, 8] .............................. 4 9 8
FIGURE 95: FUSELAGE - SKIN - ELT ANTENNA LOCATION - INTERNAL MODIFICATION [Group 1, 7]
................................................. 5 0 0
FIGURE 96: FUSELAGE - SKIN - ELT ANTENNA LOCATION - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 1, 7] .......................... 5 0 5
FIGURE 97: FUSELAGE - SKIN - ELT ANTENNA LOCATION - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1, 7] ............................... 5 0 7
APPENDIX A: NON DESTRUCTIVE INSPECTION (NDI) AREA ...................... 5 0 9
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
7 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 8

Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
8 of 510
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Revision Transmittal SheetNumber: 737-53-1310Original Issue: October 20, 2011
Revision 1: May 22, 2024
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-Mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
This revision includes all pages of the Service Bulletin.
COMPLIANCE INFORMATION RELATED TO THIS REVISION
Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-08-16 is related to this Service Bulletin.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this Service Bulletin. The Airworthiness Directive will make the compliance tasks and times given in this Service
Bulletin mandatory.
Airplane variable numbers YA137-YA199, YA373-YA377, YA630-YA631, YA666-YA667, YA861-YA862,
YA971-YA978, YB126-YB132, YB156-YB158, YB163-YB164, YB371-YB392, YB526-YB526, YB544-YB544,
YB571-YB580, YB584-YB598, YB612-YB630, YB633-YB635, YB651-YB651, YB656-YB656, YB671-YB672,
YB860-YB860, YB881-YB893, YB901-YB903, YB911-YB911, YB961-YB974, YB986-YB996, YM101-YM103,
YM201-YM242, YM251-YM270, YM273-YM299, YM301-YM396, YM471-YM471, YM481-YM484, YM510-YM515,
YM521-YM522, YM541-YM541, YM551-YM551, YM553-YM553, YM571-YM571, YM581-YM582, YM591-YM599,
YM631-YM634, YM641-YM652, YM671-YM674, YM691-YM698, YM701-YM710, YM761-YM765, YN002-YN016,
YN021-YN024, YN061-YN061, YN071-YN082, YN091-YN092, YN101-YN112, YN121-YN121, YN201-YN202,
YN211-YN219, YN231-YN235, and YN261-YN261 were moved from Group 4 to Group 3.
Effects of this Revision on airplanes on which Original Issue was previously done:
None. However, the Boeing compliance recommendation compliance times/intervals have been changed. It is
recommended for operators to review and update their maintenance program accordingly.
REASON FOR REVISION
This revision is sent to change the compliance times/intervals for the initial inspection, repeat inspections and
post modification inspections.
The Service Bulletin was also changed to Special Attention to reduce inspection threshold and intervals. Existing
Service Bulletin repeat inspections are not adequate because new fleet data indicates that crack growth is faster
and more distributed between tear straps, resulting in longer cracks, than originally observed in the test data
that was the basis for the Service Bulletin. Existing Service Bulletin inspection threshold for the pocket-pad
chem-mill step may not be adequate because new fleet data indicates that the crack initiation occurs earlier
than the Service Bulletin threshold.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
9 of 510

### Page 10

These sections were changed:
1. In Summary, Background, updated statement and added Boeing Service Related Problem (SRP) and
Boeing Fleet Team Digest (FTD) references.
2. In Summary, Compliance, updated to show a new Federal Aviation Administration (FAA) Airworthiness
Directive.
3. Paragraph 1.C., Reason, updated statement and added references to Boeing Service Related Problem
(SRP) and Boeing Fleet Team Digest (FTD). Added reason for revision statement and Alternative
Method of Compliance (AMOC) statement.
4. Paragraph 1.D., Description, added the effects of this revision on airplanes on which Original Issue
was previously done statement.
5. Paragraph 1.E., Compliance, updated to show a new Federal Aviation Administration (FAA) Airworthiness
Directive and updated existing compliance tables.
6. Paragraph 1.F., Approval, updated statement and added Alternative Method of Compliance (AMOC)
statement.
7. Paragraph 1.J.1., Existing Data, added references to show new Engineering Change Memo, Boeing
Service Related Problem (SRP), Boeing Fleet Team Digest (FTD), Federal Aviation Administration
(FAA) Airworthiness Directive and 737 Non-Destructive Testing (NDT) Manual.
8. Paragraph 1.M., Software Accomplishment Summary, new section added but not affected.
9. Paragraph 2.C.2, Parts and Material Supplied by the Operator, updated tables.
10. Paragraph 3.A.,General Information: added note 12 and 13.
11. Paragraph 3.B., Work Instructions, added inspection and added OPTION and CONDITION labels to
match changed Compliance tables. Removed references to compliance times in the work instructions.
12. FIGURE 1, 2 and 3, added new footnotes.
13. FIGURE 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 84 and 91, added
new footnote for alternative Non-Destructive Test (NDT) procedure.
14. FIGURE 48, Updated illustration.
15. FIGURE 73, Updated illustrations and footnotes.
16. FIGURE 85 and 88, added new footnote.
17. APPENDIX A, added title.
The data given in Alternative Method of Compliance Notice 737-53-1310 AMOC01 and Global Alternative Method
of Compliance Letter 782-17-675 are included in this revision.
Vertical lines are put on the left edge of each page, except in Paragraph 1.A., Effectivity and format changes,
to show the location of all content changes.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
10 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 11

Pages with no vertical lines have no changes.
REVISION HISTORY
October 20, 2011Original Issue:
May 22, 2024Revision 1:
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
11 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 12

Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
12 of 510
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 13

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-53-1310Original Issue: October 20, 2011
Revision 1: May 22, 2024
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-Mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This Service Bulletin is sent to give instructions to inspect the fuselage skin and install modification doublers at
specified locations where chem-mill areas are adjacent to non chem-mill areas at antenna and door bearstrap
installations. These actions are necessary to find and repair, or prevent fatigue cracking of the skin panel at the
specified chem-mill step locations which could result in rapid decompression of the airplane.
Boeing received reports of early fatigue cracks near chem-mill areas on the crown skin panels of
737-300/-400/-500 airplanes. The cracks resulted from high stresses in the areas where chem-mill pockets are
adjacent to non chem-mill areas. Since the original issue of this Service Bulletin, 3 cases of suspected fuselage
fatigue cracks were reported adjacent to non chem-milled skin bays on 737-700 airplanes with between 40,000
and 43,000 airframe flight cycles. These reports have lead Boeing to recommend earlier inspection thresholds
for the chem-mill areas.
Boeing had not received reports of fuselage fatigue cracks on 737-600/-700/-700C/-800/-900/-900ER airplanes
at the time of the original issue of this Service Bulletin. However, a full scale fatigue test was conducted and the
test airplane was inspected for skin cracks at similar structural details and two cracks were found that occurred
late in the testing program. The 737-700/-700C crown skin panels are of similar design to those of the
737-300/-400/-500 airplanes.
Boeing Service Related Problem (SRP) 737NG-SRP-53-0370 and 737NG-SRP-53-0626 are related to this
Service Bulletin.
Boeing Fleet Team Digest (FTD) 737NG-FTD-53-11001 and 737NG-FTD-53-20003 are related to this Service
Bulletin.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
13 of 510

### Page 14

ACTION (PRR 39800-026RS, PRR 38945)
Get external access to the areas of the crown skin at the specified antenna locations, the forward passenger
door bearstrap and the emergency exit bearstraps. Do an external detailed inspection and an external Non
Destructive Inspection (NDI) for cracking in the fuselage skin along the chem-mill steps at these locations. The
NDI methods that can be used are Medium Frequency Eddy Current (MFEC), Magneto Optical Imaging (MOI),
C-Scan or Ultrasonic Phased Array (UTPA). At each location, if any crack is found, contact Boeing for further
instructions and do the work instructed by Boeing. If no cracking is found, install the modification doublers and
fillers or repeat the inspections at the specified intervals given in Paragraph 1.E., Compliance. After
accomplishment of the modification, post modification inspections will be necessary.
EFFECTIVITY
737-700/-700C Airplane models. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-08-16 is related to this Service Bulletin.
The effective date of AD 2013-08-16 is June 5, 2013.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive related to
this Service Bulletin. The Airworthiness Directive will make the compliance tasks and times given in this Service
Bulletin mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, and/or modification procedures given in this
Service Bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
14 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 15 (OCR)

BOEING SERVICE BULLETIN 737-53-1310
STA
887
STO  72
STA  1000000000000000000000002
360
000000000
DO AN EXTERNAL DETAILED INSPECTION AND AN
EXTERNAL NON DESTRUCTIVE INSPECTION (NDI)
S-10R  FOR CRACKING IN THE FUSELAGE SKIN ALONG THE
CHEM-MILL STEPS AT THE SPECIFIED LOCATIONS IN
THE CROWN SKIN
INSTALL MODIFICATION FILLERS AND DOUBLERS AT
THE CHEM-MILL STEP. DO POST MODIFICATION
INSPECTIONS AT ALL MODIFIED LOCATIONS.
STA  STA  STA  STA  STA
294.5  312  328  344  360
S-1
I S-2L
- S-3L
EXAMPLE CRACK
/ INSPECTION AREA  LOOKING INBOARD  FWD  2064137
FORWARD ENTRY DOOR AREA PAD-UP SHOWN OTHER LOCATIONS SIMILAR
Original Issue: October 20, 2011
Revision 1: May 22, 2024  737-53-1310
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details  15 of 510

### Page 16

Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
16 of 510
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 17

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1310
Original Issue: October 20, 2011
Revision 1: May 22, 2024
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-Mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS DOCUMENT IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This bulletin is applicable to 737-700, 737-700C Airplane(s), line number(s) 1-6, 10-20, 22-29,
31-35, 37-39, 41, 43, 46-48, 52-54, 61-62, 64, 66, 68, 70-73, 82-83, 86, 90, 93-94, 96-98, 101,
104-105, 107-111, 119, 121-122, 124-127, 131, 135-136, 138, 140, 142-144, 146, 148, 150, 152,
154-158, 163, 167, 169-170, 172-173, 175, 179, 181-183, 185, 187, 189, 194-195, 197, 199, 201,
203, 205-206, 208, 211, 213-217, 219, 221, 223, 225, 229-230, 232, 234-237, 241, 244-245, 247,
251, 253, 260, 265, 272, 274, 276, 278, 280, 283-284, 286, 288, 292, 294, 299, 301, 306, 311-313,
315, 317-321, 323-325, 327, 331, 336, 338, 343, 346-348, 350, 352, 354, 356-358, 360, 364, 366,
369, 371-373, 376-377, 380, 384-385, 387-388, 390, 392, 396-397, 399-401, 404, 406, 408,
414-417, 419, 422-423, 425, 429-430, 432, 436-437, 439, 442, 445, 448, 451, 456, 458-459,
463-464, 468, 471-472, 476, 481, 486, 491, 494-496, 500-501, 507, 512, 516, 519-521, 525, 530,
532, 536-537, 541, 545, 550, 554, 558, 568-569, 574, 580, 586, 592, 595, 597, 599-603, 609, 613,
617, 620-621, 623, 626, 628, 631, 637, 642-643, 646, 648, 651, 654, 658, 661, 664, 670, 672,
675-677, 681-682, 684, 687, 690, 693, 698, 700, 702, 705, 707, 710, 713, 715-716, 718, 721, 724,
730, 734, 736-738, 740, 742, 744, 747-748, 754, 758, 763, 766, 773, 775-776, 780, 784-785,
794-796, 799, 803, 806, 809-812, 815, 817, 821, 823, 826-827, 832, 835, 843, 851, 853, 855,
858-859, 861, 864, 872-874, 877, 880-881, 885, 889-890, 895, 900, 903-905, 909, 913, 919, 922,
925-927, 931, 934, 940, 944-947, 950, 953-954, 956, 960, 967, 974-975, 978-980, 983, 986,
988-990, 993-994, 1000, 1005, 1009-1011, 1013, 1016-1017, 1023, 1025, 1027-1028, 1032, 1034,
1037, 1039-1040, 1044, 1048, 1058, 1060, 1064, 1066, 1068-1069, 1072, 1080, 1085, 1089-1090,
1092-1093, 1097, 1101, 1105, 1107, 1109, 1111, 1114, 1116, 1118-1120, 1128, 1130, 1134,
1142-1143, 1145, 1148, 1151, 1154-1156, 1159, 1161, 1171, 1173-1174, 1179, 1189, 1198,
1202-1204, 1206, 1211, 1214-1217, 1219-1223, 1226-1227, 1229, 1231-1232, 1239, 1241-1247,
1254, 1256-1261, 1264, 1266-1267, 1270, 1273, 1275, 1277-1278, 1281-1286, 1288, 1291-1292,
1297-1301, 1303-1304, 1306, 1313, 1315-1316, 1318-1319, 1321-1322, 1327-1329, 1331,
1333-1334, 1336, 1339, 1341-1343, 1346, 1349, 1351, 1353-1354, 1356-1358, 1360, 1363, 1365,
1369-1370, 1374, 1376, 1379, 1381-1382, 1384-1386, 1388, 1392-1394, 1396, 1398, 1401, 1403,
1405, 1408-1409, 1413, 1417, 1419, 1421, 1427, 1429-1431, 1433, 1439, 1442, 1445, 1449-1450,
1452-1453, 1458-1459, 1461, 1465, 1468, 1472, 1474, 1476-1477, 1480, 1482, 1484-1485, 1487,
1489-1493, 1495-1496, 1499, 1501, 1503, 1505, 1507, 1510-1511, 1513-1515, 1517-1528, 1531,
1533, 1535, 1537-1539, 1541, 1543-1545, 1548-1550, 1552-1553, 1555-1558, 1560-1561,
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
17 of 510

### Page 18

1564-1566, 1568-1572, 1574-1575, 1577, 1579, 1581, 1583-1584, 1586-1587, 1589, 1591, 1593,
1596-1597, 1599, 1601, 1603-1605, 1607, 1609, 1614, 1616, 1619, 1621, 1623-1630, 1633-1634,
1636, 1638, 1641, 1644, 1648, 1650-1651, 1653, 1656, 1659, 1663, 1665, 1668, 1671, 1675,
1678-1679, 1683, 1687, 1690, 1694, 1699, 1701, 1703, 1707-1708, 1710, 1713, 1715, 1717-1718,
1721, 1723-1724, 1728, 1730, 1733, 1735, 1737, 1739, 1741-1742, 1744, 1746-1747, 1749, 1751,
1753-1754, 1756-1758, 1761, 1763, 1765, 1767, 1769, 1771-1772, 1774, 1776-1778, 1780-1781,
1783, 1785-1786, 1788, 1790, 1793, 1795, 1799, 1801-1802, 1804, 1808, 1810, 1812, 1814, 1818,
1820, 1822-1823, 1825, 1827, 1829, 1831, 1833, 1835, 1837-1839, 1841, 1845, 1848-1850, 1853,
1856, 1858-1859, 1865, 1868, 1871-1872, 1874, 1876-1877, 1879, 1881, 1883, 1885, 1888-1890,
1893, 1896, 1898, 1900, 1902, 1905, 1908, 1916, 1919, 1922, 1925, 1928, 1930, 1934, 1937,
1940, 1943, 1947, 1950, 1952, 1954, 1959, 1962, 1965, 1967, 1969-1971, 1973-1974, 1976-1977,
1979, 1982, 1984, 1987, 1989, 1991-1993, 1995, 1997, 1999-2000, 2002, 2005-2006, 2008, 2011,
2013, 2019, 2025, 2027, 2029, 2034, 2036, 2038, 2040-2041, 2043, 2047, 2049, 2051, 2055,
2059, 2062, 2064, 2066, 2068, 2071, 2076-2077, 2080, 2083, 2086, 2089, 2092, 2094, 2098,
2102, 2107, 2111, 2114, 2118, 2122, 2126, 2129, 2131, 2133, 2135, 2137, 2139, 2141, 2143,
2145, 2147, 2149, 2151, 2153, 2156-2157, 2161, 2165, 2169, 2172, 2174, 2178, 2182, 2185,
2187-2188, 2190, 2193, 2196, 2199, 2201-2202, 2204, 2208, 2211, 2214, 2216, 2220, 2224, 2228,
2232, 2234, 2238, 2241, 2244, 2248, 2252, 2256, 2260, 2262, 2264, 2266, 2268, 2270, 2274,
2278, 2281, 2284, 2288, 2291, 2294, 2296, 2298, 2301, 2304, 2307, 2310, 2312, 2315, 2318,
2320, 2322, 2325, 2328, 2331, 2334, 2337, 2340, 2342, 2344, 2346, 2348, 2350, 2352, 2354,
2357, 2360, 2363, 2366, 2370, 2374, 2378, 2383, 2387, 2390, 2394, 2398, 2401, 2404-2405,
2409, 2413, 2417, 2421, 2425, 2427, 2431, 2436, 2438, 2442, 2446, 2451, 2456, 2460, 2462,
2465, 2469, 2473, 2475, 2480, 2484, 2488, 2491, 2494, 2497, 2500, 2505, 2509, 2513, 2517,
2521, 2526, 2531-2532, 2536, 2540, 2546, 2552, 2558, 2562, 2564, 2568, 2572, 2575-2576, 2578,
2582, 2585, 2589, 2591, 2595, 2597, 2600, 2603, 2609, 2613, 2620, 2628, 2634, 2640, 2646,
2652, 2656, 2663, 2667, 2671, 2675, 2679, 2682-2683, 2687, 2689, 2692, 2697, 2705, 2714,
2720, 2724, 2730, 2736, 2743, 2752, 2758, 2767, 2776, 2784, 2799, 2813, 2815, 2822, 2825,
2832, 2835, 2837, 2847, 2860, 2863, 2869, 2878, 2894, 2902, 2909, 2925, 2929, 2932-2933,
2943, 2949, 2961, 2968, 2980, 2983, 2985-2986, 2988, 2993, 2997, 3005, 3009, 3022, 3026,
3031, 3034, 3037, 3046, 3058, 3064, 3067, 3071, 3080, 3086, 3090, 3092, 3108, 3116, 3119,
3128, 3134, 3172, 3184, 3189, 3195, 3208, 3210, 3220, 3226, 3235, 3239, 3251, 3269, 3290,
3292, 3296, 3319, 3329-3330, 3346, 3357-3358, 3365, 3388, 3407, 3413, 3425, 3444, 3461, 3477,
3488, 3496, 3510, 3512, 3520, 3529, 3547, 3569, 3584-3585, 3590 in 8 Group(s). Where the
effectivity is presented with hyphens between line numbers, the airplane applicability means
"through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This Service Bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 38945 and PRR 39800-026RS for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
737-700 Airplanes between line number 1 to 41 without SATCOM
AERO I antenna provisions.
-1
737-700 Airplanes with Overwing Exit Pre-PRR 38432, Anti Collision
Light Pre-PRR 38745 and SATCOM AERO I antenna provisions.
-2
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
18 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 19

DESCRIPTIONCONFIGURATIONGROUP
737-700 Airplanes with Overwing Exit Post-PRR 38432, Anti Collision
Light Pre-PRR 38745 and SATCOM AERO I antenna provisions.
-3
737-700 Airplanes with Overwing Exit Post-PRR 38432, Anti Collision
Light Post-PRR 38745 and SATCOM AERO I antenna provisions.
-4
737-700 Airplane line number 96 with SATCOM AERO I antenna
provisions.
-5
737-700 Increased Gross Weight Airplanes with SATCOM AERO I
antenna provisions.
-6
737-700 Increased Gross Weight Airplanes without SATCOM AERO
I antenna provisions.
-7
737-700C Airplanes with SATCOM AERO I antenna provisions.-8
Airplane Models:
737-700, 737-700C
GroupVariable Number
1YA001 - YA011
2YA012 - YA099
3YA101 - YA199
1YA201 - YA203
2YA204 - YA210
3YA211
3YA221
1YA231 - YA240
2YA241 - YA242
1YA251 - YA252
2YA253 - YA254
3YA255 - YA256
1YA271
2YA272
5YA291
1YA301 - YA302
1YA311 - YA312
GroupVariable Number
2YA313 - YA314
2YA321 - YA323
2YA336 - YA338
3YA339 - YA345
3YA351
3YA356 - YA357
3YA366 - YA367
3YA371 - YA377
1YA501 - YA503
2YA504 - YA536
2YA541 - YA550
3YA551 - YA552
2YA571 - YA578
2YA601 - YA612
3YA613 - YA615
2YA621 - YA622
2YA626 - YA629
GroupVariable Number
3YA630 - YA631
3YA635 - YA636
3YA641 - YA642
3YA645 - YA650
3YA656 - YA659
3YA666 - YA667
3YA671 - YA672
2YA681 - YA687
3YA688 - YA691
2YA701 - YA706
3YA707 - YA710
2YA721 - YA722
2YA731 - YA734
2YA751 - YA756
2YA801 - YA803
3YA809
2YA811 - YA814
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
19 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 20

GroupVariable Number
2YA831 - YA834
3YA835
2YA841 - YA856
3YA857 - YA862
2YA881 - YA882
2YA891 - YA892
2YA961 - YA966
3YA967 - YA978
2YB001 - YB006
2YB101 - YB103
3YB104 - YB132
2YB151 - YB153
3YB156 - YB158
2YB161 - YB162
3YB163 - YB164
2YB171
3YB172
2YB181
3YB182 - YB184
2YB201 - YB202
3YB203 - YB208
3YB271
2YB276
2YB301
3YB302 - YB310
3YB371 - YB392
2YB501
3YB502
3YB521 - YB526
3YB541 - YB544
3YB551
3YB561 - YB598
GroupVariable Number
3YB601 - YB635
3YB651
3YB656
3YB671 - YB672
3YB851 - YB863
3YB871 - YB874
3YB881 - YB893
3YB901 - YB903
3YB911
3YB961 - YB974
4YB975
4YB981
3YB986 - YB996
6YG001 - YG044
6YG061 - YG064
6YG066 - YG089
6YG091 - YG099
6YG101 - YG104
6YG111 - YG114
6YG116 - YG128
6YG201 - YG205
6YG211 - YG214
6YG221 - YG224
7YG251 - YG252
8YG501 - YG511
8YG601 - YG602
8YG701
8YG711
3YM101 - YM103
3YM201 - YM242
4YM243
3YM251 - YM299
GroupVariable Number
3YM301 - YM396
4YM397 - YM399
3YM471
3YM481 - YM484
3YM501 - YM515
3YM521 - YM522
3YM541
3YM551 - YM553
3YM571 - YM572
3YM581 - YM582
3YM591 - YM599
3YM631 - YM634
3YM641 - YM652
3YM671 - YM674
3YM691 - YM698
4YM699
3YM701 - YM710
3YM761 - YM765
4YM771 - YM772
3YN001 - YN016
3YN021 - YN024
3YN061
3YN071 - YN082
3YN091 - YN092
3YN101 - YN112
3YN121
3YN201 - YN202
3YN211 - YN219
3YN231 - YN235
4YN236
3YN261
4YN501
2. Spares Affected
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
20 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 21

None.
B. Concurrent Requirements
None.
C. Reason
This Service Bulletin is sent to give instructions to inspect the fuselage skin and install modification
doublers at specified locations where chem-mill areas are adjacent to non chem-mill areas at antenna
and door bearstrap installations. These actions are necessary to find and repair, or prevent fatigue
cracking of the skin panel at the specified chem-mill step locations which could result in rapid
decompression of the airplane.
Boeing received reports of early fatigue cracks near chem-mill areas on the crown skin panels of
737-300/-400/-500 airplanes. The cracks resulted from high stresses in the areas where chem-mill
pockets are adjacent to non chem-mill areas. Since the original issue of this Service Bulletin, 3 cases
of suspected fuselage fatigue cracks were reported adjacent to non chem-milled skin bays on 737-700
airplanes with between 40,000 and 43,000 airframe flight cycles. These reports have lead Boeing to
recommend earlier inspection thresholds for the chem-mill areas.
Boeing had not received reports of fuselage fatigue cracks on 737-600/-700/-700C/-800/-900/-900ER
airplanes at the time of the original issue of this Service Bulletin. However, a full scale fatigue test was
conducted and the test airplane was inspected for skin cracks at similar structural details and two cracks
were found that occurred late in the testing program. The 737-700/-700C crown skin panels are of
similar design to those of the 737-300/-400/-500 airplanes.
Boeing Service Related Problem (SRP) 737NG-SRP-53-0370 and 737NG-SRP-53-0626 are related
to this Service Bulletin.
Boeing Fleet Team Digest (FTD) 737NG-FTD-53-11001 and 737NG-FTD-53-20003 are related to this
Service Bulletin.
Revision 1 is sent to change the compliance times/intervals for the initial inspection, repeat inspections
and post modification inspections.
The Service Bulletin was also changed to Special Attention to reduce inspection threshold and intervals.
Existing Service Bulletin repeat inspections are not adequate because new fleet data indicates that
crack growth is faster and more distributed between tear straps, resulting in longer cracks, than originally
observed in the test data that was the basis for the Service Bulletin. Existing Service Bulletin inspection
threshold for the pocket-pad chem-mill step may not be adequate because new fleet data indicates
that the crack initiation occurs earlier than the Service Bulletin threshold.
The data given in Alternative Method of Compliance Notice 737-53-1310AMOC01 and Global Alternative
Method of Compliance Letter 782-17-675 are included in this revision.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
21 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 22

D. Description
Get external access to the areas of the crown skin at the specified antenna locations, the forward
passenger door bearstrap and the emergency exit bearstraps. Do an external detailed inspection and
an external Non Destructive Inspection (NDI) for cracking in the fuselage skin along the chem-mill steps
at these locations. The NDI methods that can be used are Medium Frequency Eddy Current (MFEC),
Magneto Optical Imaging (MOI), C-Scan or Ultrasonic Phased Array (UTPA). At each location, if any
crack is found, contact Boeing for further instructions and do the work instructed by Boeing. If no
cracking is found, install the modification doublers and fillers or repeat the inspections at the specified
intervals given in Paragraph 1.E., Compliance. After accomplishment of the modification, post
modification inspections will be necessary.
Effects of this Revision on airplanes on which Original Issue was previously done:
None. However, the Boeing compliance recommendation compliance times/intervals have been changed.
It is recommended for operators to review and update their maintenance program accordingly.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-7:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242737-700
Group 8:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242737-700C
E. Compliance
Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-08-16 is related to this Service
Bulletin. The effective date of AD 2013-08-16 is June 5, 2013.
The Federal Aviation Administration (FAA) will possibly release an additional Airworthiness Directive
related to this Service Bulletin. The Airworthiness Directive will make the compliance tasks and times
given in this Service Bulletin mandatory.
For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing Service Bulletin 737-21-1149, the flight cycle related compliance times are different from
those specified in this Service Bulletin. All initial compliance times (thresholds) specified in flight cycles
must be reduced to half of those specified in this Service Bulletin. All repeat interval compliance times
specified in flight cycles must be reduced to one-quarter of those specified in this Service Bulletin.
Accomplish the required action(s), based on the applicable condition(s) in Table(s) 1 through 7, in
accordance with Paragraph 3. Accomplishment Instructions.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
22 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 23

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for
that CONDITION or OPTION.
Table 1: Fuselage skin inspections at chem-mill steps in specific pocket to no pocket areas
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Whichever occurs first:Before 37,000
total flight cycles.
OPTION 1:
Do an external Detailed
inspection and do an
external Medium Fre-
quency Eddy Current
(MFEC) or Magneto
Optic Imager (MOI) or
C-Scan inspection for
cracking in the fuselage
skin at the chem-mill
steps at specified loca-
tions in accordance
with Accomplishment
Instruction 3.B.2.a.
(a)(b)
ALL AIRPLANES
1. Within 600 flight cycles
after the Revision 1 date
of this Service Bulletin.
2. If the last inspection
was an Option 1 inspec-
tion accomplished in accor-
dance with Accomplish-
ment Instruction 3.B.2.a.
of the original issue of this
Service Bulletin: within
1,500 flight cycles after
the last Option 1 inspec-
tion.
3. If the last inspection
was an Option 2 inspec-
tion accomplished in accor-
dance with Accomplish-
ment Instruction 3.B.2.a.
of the original issue of this
Service Bulletin: within
2,100 flight cycles after
the last Option 2 inspec-
tion.
OPTION 2:
Do an external Detailed
inspection and do an
external Ultrasonic
Phased Array (UTPA)
Inspection for cracking
in the fuselage skin at
the chem-mill steps at
specified locations in
accordance with Accom-
plishment Instruction
3.B.2.a. (a)(b)
-Before further flight.Contact Boeing for fur-
ther instructions and do
the work instructed by
Boeing.
CONDITION 1:
ANY CRACK
FOUND IN THE
SKIN.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
23 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 24

Table 1: Fuselage skin inspections at chem-mill steps in specific pocket to no pocket areas
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
600 flight cycles.
(c)(d)
-OPTION 1:
Repeat external De-
tailed inspection and
external Medium Fre-
quency Eddy Current
(MFEC) or Magneto
Optic Imager (MOI) or
C-Scan inspection for
cracking in the fuselage
skin at the chem-mill
steps at specified loca-
tions in accordance
with Accomplishment
Instruction 3.B.2.a.
(a)(b)
CONDITION 2:
NO CRACK
FOUND AS A RE-
SULT OF OPTION
1 INSPECTIONS
(d)(e)Within 600 flight cycles after the most recent
OPTION 1 inspection was done.
OPTION 2:
Do an external Detailed
inspection and external
Ultrasonic Phased Ar-
ray (UTPA) Inspection
for cracking in the fuse-
lage skin at the chem-
mill steps at specified
locations in accordance
with Accomplishment
Instruction 3.B.2.a.
(a)(b)
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
24 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 25

Table 1: Fuselage skin inspections at chem-mill steps in specific pocket to no pocket areas
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(d)(e)Within 1,200 flight cycles after the most re-
cent OPTION 2 inspection was done.
OPTION 1:
Do an external Detailed
inspection and external
Medium Frequency Ed-
dy Current (MFEC) or
Magneto Optic Imager
(MOI) or C-Scan inspec-
tion for cracking in the
fuselage skin at the
chem-mill steps at
specified locations in
accordance with Accom-
plishment Instruction
3.B.2.a. (a)(b)
CONDITION 3:
NO CRACK
FOUND AS A RE-
SULT OF OPTION
2 INSPECTIONS
1,200 flight cycles.
(c)(d)
-OPTION 2:
Repeat external De-
tailed inspection and
external Ultrasonic
Phased Array (UTPA)
Inspection for cracking
in the fuselage skin at
the chem-mill steps at
specified locations in
accordance with Accom-
plishment Instruction
3.B.2.a. (a)(b)
(a) It is not necessary to inspect the chem-mill steps under an existing external repair doubler provided: (1)
The repair was installed after the original issue date of this Service Bulletin; (2) The repair was approved
by the FAA or by a Boeing company authorized representative who was authorized by the FAA to make
such findings; and (3) The repair extends a minimum of three rows of fasteners on each side of the chem-
mill line in the circumferential direction.
(b) MOI and C-Scan inspections cannot be used within 4 inches of the edge of an existing external part.
Within 4 inches of the edge of an existing external part, the MFEC or UTPA inspection must be used.
(c) After the accomplishment of this OPTION, it is acceptable to change the repeat action from this OPTION
to any other OPTION under this CONDITION. Operators must comply with the compliance time given for
the chosen OPTION under this CONDITION.
(d) Accomplishment of the modification in accordance with Accomplishment Instructions 3.B.3.a. or 3.B.3.b.
or 3.B.3.c. terminates the repeat inspections. Post-modification inspections are specified in Tables 2
through 7 of Paragraph 1.E., Compliance.
(e) Refer to the applicable CONDITION for further ACTIONS.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
25 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 26

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 3,700 flight
cycles after the
modification is in-
stalled.
Whichever occurs
first:
1. Within 3,700
flight cycles after
the Revision 1
date of this Ser-
vice Bulletin.
Before 50,000 to-
tal flight cycles.
OPTION 1:
Do an external
Low Frequency
Eddy Current
(LFEC) inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
ALL AIRPLANES
WITH EXTER-
NAL MODIFICA-
TIONS IN-
STALLED IN AC-
CORDANCE
WITH THIS SER-
VICE BULLETIN. 2. If the last inspec-
tion was an LFEC
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.a. of the
original issue of
this Service Bul-
letin: within 3,900
flight cycles after
the last LFEC in-
spection.
OPTION 2:
Do an internal
High Frequency
Eddy Current
(HFEC) inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
3. If the last inspec-
tion was an HFEC
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.a. of the
original issue of
this Service Bul-
letin: within 19,000
flight cycles after
the last HFEC in-
spection.
OPTION 3 (AC-
TION 1):
Do an external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
26 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 27

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
OPTION 3 (AC-
TION 2):
Do an internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
27 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 28

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 2,100 flight
cycles after the
modification is in-
stalled.
Whichever occurs
first:
1. Within 2,100
flight cycles after
the Revision 1
date of this Ser-
vice Bulletin.
Within 28,000
flight cycles after
the modification is
installed, or before
50,000 total flight
cycles, whichever
occurs first.
OPTION 4:
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
INSTALLED IN
ACCORDANCE
WITH THIS SER-
VICE BULLETIN.
2. If the last inspec-
tion was a detailed
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.b.(1) of
the original issue
of this Service Bul-
letin: within 4,500
flight cycles after
the last detailed
inspection.
OPTION 5:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
3. If the last inspec-
tion was an HFEC
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.b.(1) of
the original issue
of this Service Bul-
letin: within 14,000
flight cycles after
the last HFEC in-
spection.
OPTION 6 (AC-
TION 1):
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
OPTION 6 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
28 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 29

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
-Before further flight.Contact Boeing for
further instructions
and do the work
instructed by Boe-
ing.
CONDITION 1:
ANY CRACK
FOUND IN THE
SKIN.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
29 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 30

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
3,700 flight
cycles (a)
-OPTION 1:
Repeat external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
CONDITION 2:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 1 INSPEC-
TION
(b)Within 3,700 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 2:
Do an internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
(b)Within 3,700 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 3 (AC-
TION 1):
Do an external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
(b)Within 3,700 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
30 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 31

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
31 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 32

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 11,000 flight cycles after the most recent OPTION
2 inspection was done.
OPTION 1:
Do an external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
CONDITION 3:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 2 INSPEC-
TION
11,000
flight
-OPTION 2:
Repeat internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
cycles. (a)
(b)Within 11,000 flight cycles after the most recent OPTION
2 inspection was done.
OPTION 3 (AC-
TION 1):
Do an external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
(b)Within 11,000 flight cycles after the most recent OPTION
2 inspection was done.
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
32 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 33

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
33 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 34

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 5,500 flight cycles after the most recent OPTION 3
(ACTION 1) and OPTION 3 (ACTION 2) inspections were
both done at least once.
OPTION 1:
Do an external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
CONDITION 4:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 3 INSPEC-
TION
(b)Within 5,500 flight cycles after the most recent OPTION 3
(ACTION 1) and OPTION 3 (ACTION 2) inspections were
both done at least once.
OPTION 2:
Do an internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a.
5,500 flight
cycles. (a)
-OPTION 3 (AC-
TION 1):
Repeat external
LFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
24,000
flight cy-
cles. (a)
-OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
34 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 35

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Repeat internal
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
doubler in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.a
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
35 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 36

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
2,100 flight
cycles. (a)
-OPTION 4:
Repeat external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
CONDITION 5:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 4 INSPEC-
TION
(b)Within 2,100 flight cycles after the most recent OPTION 4
inspection was done.
OPTION 5:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
(b)Within 2,100 flight cycles after the most recent OPTION 4
inspection was done.
OPTION 6 (AC-
TION 1):
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
(b)Within 2,100 flight cycles after the most recent OPTION 4
inspection was done.
OPTION 6 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
36 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 37

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
37 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 38

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 4,700 flight cycles after the most recent OPTION 5
inspection was done.
OPTION 4:
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
CONDITION 6:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 5 INSPEC-
TION
4,700 flight
cycles. (a)
-OPTION 5:
Repeat external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
(b)Within 4,700 flight cycles after the most recent OPTION 5
inspection was done.
OPTION 6 (AC-
TION 1):
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
(b)Within 4,700 flight cycles after the most recent OPTION 5
inspection was done.
OPTION 6 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
38 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 39

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
39 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 40

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 600 flight cycles after the most recent OPTION 6
(ACTION 1) inspection was done.
OPTION 4:
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
CONDITION 7:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 6 INSPEC-
TION
(b)Within 3,900 flight cycles after the most recent OPTION 6
(ACTION 2) inspection was done.
OPTION 5:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
3,600 flight
cycles. (a)
-OPTION 6 (AC-
TION 1):
Repeat external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.b.(1).
5,500 flight
cycles. (a)
-OPTION 6 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
40 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 41

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Repeat external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.b.(1).
(a) After the accomplishment of this OPTION, it is acceptable to change the repeat action from this OPTION
to any other OPTION under this CONDITION. Operators must comply with the compliance time given for
the chosen OPTION under this CONDITION.
(b) Refer to the applicable CONDITION for further ACTIONS.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
41 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 42

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 2,100 flight
cycles after the
modification is in-
stalled.
Whichever occurs
first:
1. Within 2,100
flight cycles after
the Revision 1
date of this Ser-
vice Bulletin.
Within 28,000
flight cycles after
the modification is
installed, or before
50,000 total flight
cycles, whichever
occurs first.
OPTION 1:
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.c.(1).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
INSTALLED IN
ACCORDANCE
WITH THIS SER-
VICE BULLETIN.
2. If the last inspec-
tion was a detailed
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.c.(1) of
the original issue
of this Service Bul-
letin: within 4,500
flight cycles after
the last detailed
inspection.
OPTION 2:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
3. If the last inspec-
tion was an HFEC
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.c.(1) of
the original issue
of this Service Bul-
letin: within 14,000
flight cycles after
the last HFEC in-
spection.
OPTION 3 (AC-
TION 1):
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.c.(1).
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
42 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 43

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
-Before further flight.Contact Boeing for
further instructions
and do the work
instructed by Boe-
ing.
CONDITION 1:
ANY CRACK
FOUND IN THE
SKIN.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
43 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 44

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
2,100 flight
cycles. (a)
-OPTION 1:
Repeat external
detailed inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
CONDITION 2:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 1 INSPEC-
TION
(b)Within 2,100 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 2:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
(b)Within 2,100 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 3 (AC-
TION 1):
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.c.(1).
(b)Within 2,100 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
44 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 45

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
45 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 46

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 4,700 flight cycles after the most recent OPTION 2
inspection was done.
OPTION 1:
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.c.(1).
CONDITION 3:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 2 INSPEC-
TION
4,700 flight
cycles. (a)
-OPTION 2:
Repeat external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
(b)Within 4,700 flight cycles after the most recent OPTION 2
inspection was done.
OPTION 3, (AC-
TION 1):
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.c.(1).
(b)Within 4,700 flight cycles after the most recent OPTION 2
inspection was done.
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
46 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 47

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
47 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 48

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 600 flight cycles after the most recent OPTION 3
(ACTION 1) inspection was done.
OPTION 1:
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.c.(1).
CONDITION 4:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 3 INSPEC-
TION
(b)Within 3,900 flight cycles after the most recent OPTION 3
(ACTION 2) inspection was done.
OPTION 2:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
3,600 flight
cycles. (a)
-OPTION 3 (AC-
TION 1):
Repeat external
detailed inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
5,500 flight
cycles. (a)
-OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
48 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 49

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Repeat external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.c.(1).
(a) After the accomplishment of this OPTION, it is acceptable to change the repeat action from this OPTION
to any other OPTION under this CONDITION. Operators must comply with the compliance time given for
the chosen OPTION under this CONDITION.
(b) Refer to the applicable CONDITION for further ACTIONS.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
49 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 50

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 2,100 flight
cycles after the
modification is in-
stalled.
Whichever occurs
first:
1. Within 2,100
flight cycles after
the Revision 1
date of this Ser-
vice Bulletin.
Within 28,000
flight cycles after
the modification is
installed, or before
50,000 total flight
cycles, whichever
occurs first.
OPTION 1:
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.d.(1).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
INSTALLED IN
ACCORDANCE
WITH THIS SER-
VICE BULLETIN.
2. If the last inspec-
tion was a detailed
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.d.(1) of
the original issue
of this Service Bul-
letin: within 4,500
flight cycles after
the last detailed
inspection.
OPTION 2:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
3. If the last inspec-
tion was an HFEC
inspection accom-
plished in accor-
dance with Accom-
plishment Instruc-
tion 3.B.5.d.(1) of
the original issue
of this Service Bul-
letin: within 14,000
flight cycles after
the last HFEC in-
spection.
OPTION 3 (AC-
TION 1):
Do an external
Detailed inspec-
tion of the fuse-
lage skin for
cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.d.(1).
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
50 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 51

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
-Before further flight.Contact Boeing for
further instructions
and do the work
instructed by Boe-
ing.
CONDITION 1:
ANY CRACK
FOUND IN THE
SKIN.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
51 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 52

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
2,100 flight
cycles. (a)
-OPTION 1:
Repeat external
detailed inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
CONDITION 2:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 1 INSPEC-
TION
(b)Within 2,100 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 2:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
(b)Within 2,100 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 3 (AC-
TION 1):
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.d.(1).
(b)Within 2,100 flight cycles after the most recent OPTION 1
inspection was done.
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
52 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 53

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
53 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 54

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 4,700 flight cycles after the most recent OPTION 2
inspection was done.
OPTION 1:
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.d.(1).
CONDITION 3:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 2 INSPEC-
TION
4,700 flight
cycles. (a)
-OPTION 2:
Repeat external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
(b)Within 4,700 flight cycles after the most recent OPTION 2
inspection was done.
OPTION 3 (AC-
TION 1):
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.d.(1).
(b)Within 4,700 flight cycles after the most recent OPTION 2
inspection was done.
OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
54 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 55

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
55 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 56

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
(b)Within 600 flight cycles after the most recent OPTION 3
(ACTION 1) inspection was done.
OPTION 1:
Do an external de-
tailed inspection of
the fuselage skin
for cracking at the
outer row of fasten-
ers common to the
modification filler
in accordance with
Accomplishment
Instructions
3.B.5.d.(1).
CONDITION 4:
NO CRACK
FOUND AS A
RESULT OF OP-
TION 3 INSPEC-
TION
(b)Within 3,900 flight cycles after the most recent OPTION 3
(ACTION 2) inspection was done.
OPTION 2:
Do an external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
3,600 flight
cycles. (a)
-OPTION 3 (AC-
TION 1):
Repeat external
detailed inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
5,500 flight
cycles. (a)
-OPTION 3 (AC-
TION 2):
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
56 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 57

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat In-
terval
(Not to Ex-
ceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
Repeat external
HFEC inspection
of the fuselage
skin for cracking at
the outer row of
fasteners common
to the modification
filler in accordance
with Accomplish-
ment Instructions
3.B.5.d.(1).
(a) After the accomplishment of this OPTION, it is acceptable to change the repeat action from this OPTION
to any other OPTION under this CONDITION. Operators must comply with the compliance time given for
the chosen OPTION under this CONDITION.
(b) Refer to the applicable CONDITION for further ACTIONS.
Group 1-5:
Table 5: Post Modification inspection of the fuselage skin at the Chem-Mill step
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Before 50,000 total
flight cycles.
Do an external Non
Destructive Inspec-
tion (NDI) for crack-
ing in the fuselage
skin at the chem-mill
step at the specified
locations in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.b.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN BEFORE
22,400 TOTAL
FLIGHT CYCLES.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
57 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 58

Group 1-5:
Table 5: Post Modification inspection of the fuselage skin at the Chem-Mill step
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Before 41,000 total
flight cycles.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.b.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN AFTER
22,399 TOTAL
FLIGHT CYCLES
BUT BEFORE
32,001 TOTAL
FLIGHT CYCLES.
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Within 5,500 flight
cycles after modifica-
tion doubler is in-
stalled.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.b.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN AFTER
32,000 TOTAL
FLIGHT CYCLES.
--Before further flight.Contact Boeing for
further instructions
and do the work in-
structed by Boeing.
CONDITION 1:
ANY CRACK
FOUND IN THE
SKIN.
5,500 flight cycles.-Repeat external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.b.(2).
CONDITION 2:
NO CRACK FOUND
IN THE SKIN.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
58 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 59

Group 6-7:
Table 6: Post Modification inspection of the fuselage skin at the Chem-Mill step
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Before 50,000 total
flight cycles.
Do an external Non
Destructive Inspec-
tion (NDI) for crack-
ing in the fuselage
skin at the chem-mill
step at the specified
locations in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.c.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN BEFORE
22,400 TOTAL
FLIGHT CYCLES.
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Before 41,000 total
flight cycles.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.c.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN AFTER
22,399 TOTAL
FLIGHT CYCLES
BUT BEFORE
32,001 TOTAL
FLIGHT CYCLES.
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Within 5,500 flight
cycles after modifica-
tion doubler is in-
stalled.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.c.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN AFTER
32,000 TOTAL
FLIGHT CYCLES.
--Before further flight.Contact Boeing for
further instructions
and do the work in-
structed by Boeing.
CONDITION 1:
ANY CRACK
FOUND IN THE
SKIN.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
59 of 510
BOEING SERVICE BULLETIN 737-53-1310

### Page 60

Group 6-7:
Table 6: Post Modification inspection of the fuselage skin at the Chem-Mill step
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
5,500 flight cycles.-Repeat external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.c.(2).
CONDITION 2:
NO CRACK FOUND
IN THE SKIN.
Group 8:
Table 7: Post Modification inspection of the fuselage skin at the Chem-Mill step
Repeat Interval
(Not to Exceed)
Compliance Time
(Whichever Occurs Later)
ActionCondition
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Before 50,000 total
flight cycles.
Do an external Non
Destructive Inspec-
tion (NDI) for crack-
ing in the fuselage
skin at the chem-mill
step at the specified
locations in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.d.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN BEFORE
22,400 TOTAL
FLIGHT CYCLES.
-Within 600 flight cy-
cles after the Revi-
sion 1 date of this
Service Bulletin, or
within 5,500 flight cy-
cles after the last in-
spection accom-
plished in accor-
dance with the origi-
nal issue of this Ser-
vice Bulletin,
whichever occurs
first.
Before 41,000 total
flight cycles.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.d.(2).
ALL AIRPLANES
WITH INTERNAL
MODIFICATIONS
THAT WERE IN-
STALLED IN AC-
CORDANCE WITH
THIS SERVICE
BULLETIN AFTER
22,399 TOTAL
FLIGHT CYCLES
BUT BEFORE
32,001 TOTAL
FLIGHT CYCLES.
Export Controlled ECCN: 9E991
BOEING PROPRIETARY - See page 1 for details
Original Issue: October 20, 2011
737-53-1310Revision 1: May 22, 2024
60 of 510
BOEING SERVICE BULLETIN 737-53-1310

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-53-1310/file/97c3a873e1ec.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
