# Boeing Service Bulletin 737-53-1310: Service Bulletin

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0936; AD 2013-08-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 737-53-1310](https://openairdocs.org/service-documents/boeing/sb-737-53-1310.md)
- Title as filed: Service Bulletin
- Pages: 467
- PDF: https://openairdocs.org/files/sha256/d9/12/d912d5ebeda064211221397d7237be7694f8d4da5c860bead004272e2caccb24
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1310/file/d912d5ebeda0

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
Number: 737-53-1310
Original Issue: October 20, 2011
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
1 of 467
5.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
2 of 467
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 9
1. PLANNING INFORMATION ........................................ 1 3
A. Effectivity ............................................... 1 3
1. Airplanes ............................................ 1 3
2. Spares Affected ........................................ 1 9
B. Concurrent Requirements ...................................... 1 9
C. Reason ................................................ 1 9
D. Description .............................................. 1 9
E. Compliance .............................................. 2 0
F. Approval ............................................... 2 7
G. Manpower .............................................. 2 7
H. Weight and Balance Changes .................................... 5 6
I. Electrical Load Data ......................................... 6 1
J. References .............................................. 6 2
1. Existing Data .......................................... 6 2
2. Data supplied with this Service Bulletin ............................ 6 2
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 6 2
K. Publications Affected ........................................ 6 3
L. Interchangeability and Intermixability of Parts ........................... 6 3
2. MATERIAL INFORMATION ........................................ 6 5
A. Material - Price and Availability ................................... 6 5
B. Industry Support Information .................................... 6 5
C. Parts Necessary For Each Airplane ................................. 6 5
1. Kits/Parts ............................................ 6 5
2. Parts and Materials Supplied by the Operator ........................ 6 5
3. Parts Modified and Reidentified ................................ 7 4
4. Parts Removed and Not Replaced .............................. 7 4
D. Parts Necessary to Change Spares ................................. 7 4
E. Special Tooling - Price and Availability ............................... 7 4
F. Special Tooling Necessary to do this Service Bulletin ....................... 7 4
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 7 5
A. GENERAL INFORMATION ..................................... 7 5
B. WORK INSTRUCTIONS ....................................... 7 6
FIGURE 1: FIGURE LAYOUT MAP - 737-700 AIRPLANES [Group 1-5] ................. 8 3
FIGURE 2: FIGURE LAYOUT MAP - 737-700 AIRPLANES WITH INCREASED GROSS WEIGHT (IGW)
[Group 6-7] ........................................... 8 6
FIGURE 3: FIGURE LAYOUT MAP - 737-700C AIRPLANES [Group 8] ................. 8 8
FIGURE 4: FUSELAGE - SKIN - SECTION 41 FORWARD ENTRY DOOR AREA - CHEM-MILL STEP
INSPECTION [Group 1-7] ................................... 9 0
FIGURE 5: FUSELAGE - SKIN - SECTION 41 FORWARD ENTRY DOOR AREA - INTERNAL
MODIFICATION [Group 1-7] .................................. 9 2
FIGURE 6: FUSELAGE - SKIN - SECTION 41 FORWARD ENTRY DOOR AREA - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-7] ................ 1 0 0
FIGURE 7: FUSELAGE - SKIN - SECTION 41 FORWARD ENTRY DOOR AREA - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-7] ...................... 1 0 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
3 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 4

FIGURE 8: FUSELAGE - SKIN - MAIN DECK CARGO AREA - CHEM-MILL STEP INSPECTION [Group
8 ]  ................................................ 1 0 8
FIGURE 9: FUSELAGE - SKIN - MAIN DECK CARGO AREA - INTERNAL MODIFICATION [Group 8] . 110
FIGURE 10: FUSELAGE - SKIN - MAIN DECK CARGO AREA - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 8] ............................ 1 1 7
FIGURE 11: FUSELAGE - SKIN - MAIN DECK CARGO AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 8] ................................. 1 1 9
FIGURE 12: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - CHEM-MILL STEP INSPECTION
[Group 1-7] .......................................... 1 2 1
FIGURE 13: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - INTERNAL MODIFICATION [Group
1-7] ............................................... 1 2 3
FIGURE 14: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-7] ................ 1 2 7
FIGURE 15: FUSELAGE - SKIN - FORWARD ENTRY DOOR AFT SIDE - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-7] ...................... 1 2 9
FIGURE 16: FUSELAGE - SKIN - TCAS ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 1 3 1
FIGURE 17: FUSELAGE - SKIN - TCAS ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 133
FIGURE 18: FUSELAGE - SKIN - TCAS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 1 3 7
FIGURE 19: FUSELAGE - SKIN - TCAS ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 1 3 9
FIGURE 20: FUSELAGE - SKIN - ATC ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 1 4 1
FIGURE 21: FUSELAGE - SKIN - ATC ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 143
FIGURE 22: FUSELAGE - SKIN - ATC ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 1 5 4
FIGURE 23: FUSELAGE SKIN - ATC ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 1 5 9
FIGURE 24: FUSELAGE - SKIN - TACAN ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 1 6 4
FIGURE 25: FUSELAGE - SKIN - TACAN ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 166
FIGURE 26: FUSELAGE - SKIN - TACAN ANTENNA AREA - POST MODIFICATION INSPECTION AT
OUTER FASTENER ROWS [Group 1-7] .......................... 1 7 1
FIGURE 27: FUSELAGE - SKIN - TACAN ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 1 7 3
FIGURE 28: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - CHEM-MILL STEP INSPECTION
[Group 1-7] .......................................... 1 7 5
FIGURE 29: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - INTERNAL MODIFICATION [Group
1-7] ............................................... 1 7 7
FIGURE 30: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS [Group 1-7] ........................ 1 8 7
FIGURE 31: FUSELAGE - SKIN - HIGH GAIN SATCOM - LEFT SIDE - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 1-7] .............................. 1 9 1
FIGURE 32: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - CHEM-MILL STEP INSPECTION
................................................. 1 9 5
FIGURE 33: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - INTERNAL MODIFICATION . 197
FIGURE 34: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS ............................... 2 0 7
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
4 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 5

FIGURE 35: FUSELAGE - SKIN - HIGH GAIN SATCOM - RIGHT SIDE - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP .................................... 2 1 1
FIGURE 36: FUSELAGE - SKIN - GPS ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 2 1 5
FIGURE 37: FUSELAGE - SKIN - GPS ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 217
FIGURE 38: FUSELAGE - SKIN - GPS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 2 2 6
FIGURE 39: FUSELAGE - SKIN - GPS ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 2 2 8
FIGURE 40: FUSELAGE - SKIN - MLS ANTENNA AREA - CHEM-MILL STEP INSPECTION [Group 1-7]
................................................. 2 3 0
FIGURE 41: FUSELAGE - SKIN - MLS ANTENNA AREA - INTERNAL MODIFICATION [Group 1-7] . 232
FIGURE 42: FUSELAGE - SKIN - MLS ANTENNA AREA - POST MODIFICATION INSPECTION AT OUTER
FASTENER ROWS [Group 1-7] ............................... 2 3 7
FIGURE 43: FUSELAGE - SKIN - MLS ANTENNA AREA - POST MODIFICATION INSPECTION AT
CHEM-MILL STEP [Group 1-7] ................................ 2 3 9
FIGURE 44: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - CHEM-MILL STEP
INSPECTION [Group 1-3, 5] ................................. 2 4 1
FIGURE 45: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - INTERNAL
MODIFICATION [Group 1-3, 5] ................................ 2 4 3
FIGURE 46: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-3, 5] ............... 2 4 8
FIGURE 47: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (PRE-PRR38745) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-3, 5] .................... 2 5 0
FIGURE 48: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - CHEM-MILL STEP
INSPECTION [Group 4] .................................... 2 5 2
FIGURE 49: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - INTERNAL
MODIFICATION [Group 4] .................................. 2 5 4
FIGURE 50: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 4] .................. 2 6 4
FIGURE 51: FUSELAGE - SKIN - ANTI-COLLISION LIGHT AREA (POST-PRR38745) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 4] ....................... 2 6 9
FIGURE 52: FUSELAGE - SKIN - ELT ANTENNA AREA (SECTION 44) - CHEM-MILL STEP INSPECTION
[Group 1-5] .......................................... 2 7 4
FIGURE 53: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 44) - INTERNAL MODIFICATION
[Group 1-5] .......................................... 2 7 6
FIGURE 54: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 44) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-5] ................ 2 8 1
FIGURE 55: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 44) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-5] ...................... 2 8 3
FIGURE 56: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - CHEM-MILL
STEP INSPECTION [Group 1-2, 5] ............................. 2 8 5
FIGURE 57: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - INTERNAL
AND EXTERNAL MODIFICATION [Group 1-2, 5] ...................... 2 8 7
FIGURE 58: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 1-2, 5] ...... 2 9 7
FIGURE 59: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 1-2, 5] ........... 3 0 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
5 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 6

FIGURE 60: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE -
CHEM-MILL STEP INSPECTION [Group 1-2, 5] ...................... 3 0 5
FIGURE 61: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE - INTERNAL
AND EXTERNAL MODIFICATION [Group 1-2, 5] ...................... 3 0 7
FIGURE 62: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 1-2, 5] ...... 3 1 7
FIGURE 63: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (PRE PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 1-2, 5] ........... 3 2 2
FIGURE 64: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE -
CHEM-MILL STEP INSPECTION [Group 3-4] ........................ 3 2 5
FIGURE 65: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE - INTERNAL
AND EXTERNAL MODIFICATION [Group 3-4] ....................... 3 2 7
FIGURE 66: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 3-4] ....... 3 3 7
FIGURE 67: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - LEFT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 3-4] ............ 3 4 2
FIGURE 68: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE -
CHEM-MILL STEP INSPECTION [Group 3-4] ........................ 3 4 5
FIGURE 69: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE -
INTERNAL AND EXTERNAL MODIFICATION [Group 3-4] ................ 3 4 7
FIGURE 70: FUSELAGE - SKIN - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT OUTER FASTENER ROWS [Group 3-4] ....... 3 5 7
FIGURE 71: FUSELAGE - OVERWING EXIT DOUBLER (POST PRR 38432) - RIGHT SIDE - POST
MODIFICATION INSPECTION AT CHEM-MILL STEP [Group 3-4] ............ 3 6 2
FIGURE 72: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 44) - CHEM-MILL STEP INSPECTION
[Group 1-5] .......................................... 3 6 5
FIGURE 73: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 44) - INTERNAL MODIFICATION [Group
1-5] ............................................... 3 6 7
FIGURE 74: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 44) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-5] ................ 3 7 8
FIGURE 75: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 44) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-5] ...................... 3 8 3
FIGURE 76: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - CHEM-MILL STEP INSPECTION
[Group 1-5] .......................................... 3 8 8
FIGURE 77: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - INTERNAL MODIFICATION [Group
1-5] ............................................... 3 9 0
FIGURE 78: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1-5] ................ 3 9 9
FIGURE 79: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1-5] ...................... 4 0 3
FIGURE 80: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - CHEM-MILL STEP INSPECTION
[Group 6-8] .......................................... 4 0 7
FIGURE 81: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - INTERNAL MODIFICATION [Group
6-8] ............................................... 4 0 9
FIGURE 82: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 6-8] ................ 4 1 4
FIGURE 83: FUSELAGE - SKIN - ADF ANTENNA AREA (SECTION 46) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 6-8] ...................... 4 1 6
FIGURE 84: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - CHEM-MILL STEP INSPECTION
[Group 2-6, 8] ......................................... 4 1 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
6 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 7

FIGURE 85: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - INTERNAL MODIFICATION [Group
5 ]  ................................................ 4 2 0
FIGURE 86: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS [Group 5] .......................... 4 2 9
FIGURE 87: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 5] ............................... 4 3 1
FIGURE 88: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - INTERNAL MODIFICATION [Group
2-4, 6, 8] ............................................ 4 3 3
FIGURE 89: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT OUTER FASTENER ROWS [Group 2-4, 6, 8] ...................... 4 4 2
FIGURE 90: FUSELAGE - SKIN - SATCOM AERO I ANTENNA AREA - POST MODIFICATION INSPECTION
AT CHEM-MILL STEP [Group 2-4, 6, 8] ........................... 4 4 4
FIGURE 91: FUSELAGE - SKIN - ELT ANTENNA AREA (SECTION 46) - CHEM-MILL STEP INSPECTION
................................................. 4 4 6
FIGURE 92: FUSELAGE - SKIN - ELT ANTENNA AREA (SECTION 46) - INTERNAL MODIFICATION [Group
2-6, 8] ............................................. 4 4 8
FIGURE 93: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 46) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 2-6, 8] ............... 4 5 3
FIGURE 94: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 46) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 2-6, 8] .................... 4 5 5
FIGURE 95: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 46) - INTERNAL MODIFICATION
[Group 1, 7] .......................................... 4 5 7
FIGURE 96: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 46) - POST MODIFICATION
INSPECTION AT OUTER FASTENER ROWS [Group 1, 7] ................ 4 6 2
FIGURE 97: FUSELAGE - SKIN - ELT ANTENNA LOCATION (SECTION 46) - POST MODIFICATION
INSPECTION AT CHEM-MILL STEP [Group 1, 7] ..................... 4 6 4
APPENDIX A: ................................................. 4 6 6
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
7 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 8

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
8 of 467
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SummaryNumber: 737-53-1310Original Issue: October 20, 2011
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This service bulletin is sent to give instructions to inspect the fuselage skin and install modification doublers at
specified locations where chem-mill areas are adjacent to non chem-mill areas at antenna and door bearstrap
installations. These actions are necessary to find and repair, or prevent fatigue cracking of the skin panel at the
specified chem-mill step locations which could result in rapid decompression of the airplane.
Boeing received reports of early fatigue cracks near chem-mill areas on the crown skin panels of
737-300/-400/-500 airplanes. The cracks resulted from high stresses in the areas where chem-mill pockets are
adjacent to non chem-mill areas.
Boeing has not received reports of fuselage fatigue cracks on 737-600/-700/-700C/-800/-900/-900ER airplanes,
however a full scale fatigue test was inspected for skin cracks at similar structural details and two cracks were
found that occurred late in the testing program. The 737-700/-700C crown skin panels are of similar design to
those of the 737-300/-400/-500 airplanes.
Boeing Service Related Problem (SRP) 737NG-SRP-53-0370 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737NG FTD 53-11001 is related to this service bulletin.
ACTION (PRR 38945)
Get external access to the areas of the crown skin at the specified antenna locations, the forward passenger
door bearstrap and the emergency exit bearstraps. Do an external detailed inspection and an external Non
Destructive Inspection (NDI) for cracking in the fuselage skin along the chem-mill steps at these locations. The
NDI methods that can be used are Medium Frequency Eddy Current (MFEC), Magneto Optical Imaging (MOI),
C-Scan or Ultrasonic Phased Array (UTPA). At each location, if any crack is found, contact Boeing for further
instructions and do the work instructed by Boeing. If no cracking is found, install the modification doublers and
fillers or repeat the inspections at the specified intervals given in Paragraph 1.E., Compliance. After
accomplishment of the modification, post modification inspections will be necessary.
EFFECTIVITY
737-700/-700C Airplane models. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
9 of 467

### Page 10

COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are not available for the inspection, and/or modification procedures given in this
service bulletin.
MANPOWER
Refer to Paragraph 1.G., Manpower.
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
10 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 11 (OCR)

BOEING SERVICE BULLETIN 737-53-1310
STA
887
STO
STA  10000
360
000000000
DO AN EXTERNAL DETAILED INSPECTION AND AN
EXTERNAL NON DESTRUCTIVE INSPECTION (NDI)
S-10R  FOR CRACKING IN THE FUSELAGE SKIN ALONG THE
CHEM-MILL STEPS AT THE SPECIFIED LOCATIONS IN
THE CROWN SKIN
INSTALL MODIFICATION FILLERS AND DOUBLERS AT
THE CHEM-MILL STEP. DO POST MODIFICATION
INSPECTIONS AT ALL MODIFIED LOCATIONS.
STA  STA  STA  STA  STA
294.5  312  328  344  360
S-1
S-2L
- S-3L
EXAMPLE CRACK
/ INSPECTION AREA  FWD
LOOKING INBOARD  2064137
FORWARD ENTRY DOOR AREA PAD-UP SHOWN OTHER LOCATIONS SIMILAR
Original Issue: October 20, 2011
BOEING PROPRIETARY -  737-53-1310
Copyright © Unpublished Work - See page 1 for details.  11 of 467

### Page 12

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
12 of 467
BOEING SERVICE BULLETIN 737-53-1310
BLANK PAGE

### Page 13

Commercial 
Airplanes
737
Service Bulletin
Number: 737-53-1310
Original Issue: October 20, 2011
ATA System: 5331
SUBJECT: FUSELAGE - Skin - Chem-mill Steps in Crown Skins at Specified Locations - Inspection
and Modification
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
Refer to Service Bulletin Index D6-19567 Part 3 for Airplane Variable Number, Line Number, and
Serial Number data.
This service bulletin is for the airplane(s) shown below. An equivalent change is on subsequent
production airplanes. Refer to PRR 38945 for data about this change.
DESCRIPTIONCONFIGURATIONGROUP
737-700 Airplanes between line number 1 to 41 without SATCOM
AERO I antenna provisions.
-1
737-700 Airplanes with Overwing Exit Pre-PRR 38432, Anti Collision
Light Pre-PRR 38745 and SATCOM AERO I antenna provisions.
-2
737-700 Airplanes with Overwing Exit Post-PRR 38432, Anti Collision
Light Pre-PRR 38745 and SATCOM AERO I antenna provisions.
-3
737-700 Airplanes with Overwing Exit Post-PRR 38432, Anti Collision
Light Post-PRR 38745 and SATCOM AERO I antenna provisions.
-4
737-700 Airplane line number 96 with SATCOM AERO I antenna
provisions.
-5
737-700 Increased Gross Weight Airplanes with SATCOM AERO I
antenna provisions.
-6
737-700 Increased Gross Weight Airplanes without SATCOM AERO
I antenna provisions.
-7
737-700C Airplanes with SATCOM AERO I antenna provisions.-8
Airplane Models:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
13 of 467

### Page 14

737-700, 737-700C
GroupVariable Number
1YA001 - YA011
2YA012 - YA099
3YA101 - YA136
4YA137 - YA199
1YA201 - YA203
2YA204 - YA210
3YA211
3YA221
1YA231 - YA240
2YA241 - YA242
1YA251 - YA252
2YA253 - YA254
3YA255 - YA256
1YA271
2YA272
5YA291
1YA301 - YA302
1YA311 - YA312
2YA313 - YA314
2YA321 - YA323
2YA336 - YA338
3YA339 - YA345
3YA351
3YA356 - YA357
3YA366 - YA367
3YA371 - YA372
4YA373 - YA377
1YA501 - YA503
2YA504 - YA536
2YA541 - YA550
3YA551 - YA552
2YA571 - YA578
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
14 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 15

GroupVariable Number
2YA601 - YA612
3YA613 - YA615
2YA621 - YA622
2YA626 - YA629
4YA630 - YA631
3YA635 - YA636
3YA641 - YA642
3YA645 - YA650
3YA656 - YA659
4YA666 - YA667
3YA671 - YA672
2YA681 - YA687
3YA688 - YA691
2YA701 - YA706
3YA707 - YA710
2YA721 - YA722
2YA731 - YA734
2YA751 - YA756
2YA801 - YA803
3YA809
2YA811 - YA814
2YA831 - YA834
3YA835
2YA841 - YA856
3YA857 - YA860
4YA861 - YA862
2YA881 - YA882
2YA891 - YA892
2YA961 - YA966
3YA967 - YA970
4YA971 - YA978
2YB001 - YB006
2YB101 - YB103
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
15 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 16

GroupVariable Number
3YB104 - YB125
4YB126 - YB132
2YB151 - YB153
4YB156 - YB158
2YB161 - YB162
4YB163 - YB164
2YB171
3YB172
2YB181
3YB182 - YB184
2YB201 - YB202
3YB203 - YB208
3YB271
2YB276
2YB301
3YB302 - YB310
4YB371 - YB392
2YB501
3YB502
3YB521 - YB525
4YB526
3YB541 - YB543
4YB544
3YB551
3YB561 - YB570
4YB571 - YB580
3YB581 - YB583
4YB584 - YB598
3YB601 - YB611
4YB612 - YB630
3YB631 - YB632
4YB633 - YB635
4YB651
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
16 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 17

GroupVariable Number
4YB656
4YB671 - YB672
3YB851 - YB859
4YB860
3YB861 - YB863
3YB871 - YB874
4YB881 - YB893
4YB901 - YB903
4YB911
4YB961 - YB975
4YB981
4YB986 - YB996
6YG001 - YG044
6YG061 - YG064
6YG066 - YG089
6YG091 - YG099
6YG101 - YG104
6YG111 - YG114
6YG116 - YG128
6YG201 - YG205
6YG211 - YG214
6YG221 - YG224
7YG251 - YG252
8YG501 - YG511
8YG601 - YG602
8YG701
8YG711
4YM101 - YM103
4YM201 - YM243
4YM251 - YM270
3YM271 - YM272
4YM273 - YM299
4YM301 - YM399
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
17 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 18

GroupVariable Number
4YM471
4YM481 - YM484
3YM501 - YM509
4YM510 - YM515
4YM521 - YM522
4YM541
4YM551
3YM552
4YM553
4YM571
3YM572
4YM581 - YM582
4YM591 - YM599
4YM631 - YM634
4YM641 - YM652
4YM671 - YM674
4YM691 - YM699
4YM701 - YM710
4YM761 - YM765
4YM771 - YM772
3YN001
4YN002 - YN016
4YN021 - YN024
4YN061
4YN071 - YN082
4YN091 - YN092
4YN101 - YN112
4YN121
4YN201 - YN202
4YN211 - YN219
4YN231 - YN236
4YN261
4YN501
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
18 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 19

2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This service bulletin is sent to give instructions to inspect the fuselage skin and install modification
doublers at specified locations where chem-mill areas are adjacent to non chem-mill areas at antenna
and door bearstrap installations. These actions are necessary to find and repair, or prevent fatigue
cracking of the skin panel at the specified chem-mill step locations which could result in rapid
decompression of the airplane.
Boeing received reports of early fatigue cracks near chem-mill areas on the crown skin panels of
737-300/-400/-500 airplanes. The cracks resulted from high stresses in the areas where chem-mill
pockets are adjacent to non chem-mill areas.
Boeing has not received reports of fuselage fatigue cracks on 737-600/-700/-700C/-800/-900/-900ER
airplanes, however a full scale fatigue test was inspected for skin cracks at similar structural details
and two cracks were found that occurred late in the testing program. The 737-700/-700C crown skin
panels are of similar design to those of the 737-300/-400/-500 airplanes.
Boeing Service Related Problem (SRP) 737NG-SRP-53-0370 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 737NG FTD 53-11001 is related to this service bulletin.
D. Description
Get external access to the areas of the crown skin at the specified antenna locations, the forward
passenger door bearstrap and the emergency exit bearstraps. Do an external detailed inspection and
an external Non Destructive Inspection (NDI) for cracking in the fuselage skin along the chem-mill steps
at these locations. The NDI methods that can be used are Medium Frequency Eddy Current (MFEC),
Magneto Optical Imaging (MOI), C-Scan or Ultrasonic Phased Array (UTPA). At each location, if any
crack is found, contact Boeing for further instructions and do the work instructed by Boeing. If no
cracking is found, install the modification doublers and fillers or repeat the inspections at the specified
intervals given in Paragraph 1.E., Compliance. After accomplishment of the modification, post
modification inspections will be necessary.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1-7:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242737-700
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
19 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 20

Group 8:
Affected Maintenance Zones
ZoneModel
221, 222, 231, 232, 241, 242737-700C
E. Compliance
For airplanes which have incorporated Boeing Business Jet (BBJ) Lower Cabin Altitude Supplemental
Type Certificate (STC) ST01697SE (6500 feet maximum cabin altitude in lieu of 8000 feet) as referenced
in Boeing Service Bulletin 737-21-1149, the flight cycle related compliance times are different from
those specified in this service bulletin. All initial compliance times (thresholds) specified in flight cycles
must be reduced to half of those specified in this service bulletin. All repeat interval compliance times
specified in flight cycles must be reduced to one-quarter of those specified in this service bulletin.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
20 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 21

Table 1: Fuselage skin inspections at chem-mill steps in specific pocket to no pocket areas
Repeat Interval (Not
to Exceed)
Compliance Time (Whichever Occurs
Later)
ActionCondition
1,500 flight cycles af-
ter an Option 1 in-
spection. 2,100 flight
cycles after an Op-
tion 2 inspection. (c)
(d)
Within 1,500 flight
cycles after the origi-
nal issue date of this
service bulletin.
Before 43,000 total
flight cycles.
Do an external detailed
inspection and an exter-
nal Non Destructive In-
spection (NDI) for
cracking in the fuselage
skin at the chem-mill
steps at specified loca-
tions in accordance
with Accomplishment
Instruction 3.B.2.a. us-
ing one of the following
NDI options: (a) (b)
All airplanes
Option 1: Do an exter-
nal Medium Frequency
Eddy Current (MFEC)
or Magneto Optic Im-
ager (MOI) or C-Scan
inspection.
OR
Option 2: Do an exter-
nal Ultrasonic Phased
Array Inspection (UT-
PA).
-Before further flight.Contact Boeing for fur-
ther instructions and do
the work instructed by
Boeing.
Any crack is found
in the skin.
(a) It is not necessary to inspect the chem-mill steps under an existing external repair doubler provided; (1)
The repair was installed after the original issue date of this service bulletin and (2) The repair was approved
by the FAA or by a Boeing company authorized representative who was authorized by the FAA to make
such findings and (3) The repair extends a minimum of three rows of fasteners on each side of the chem-
mill line in the circumferential direction.
(b) MOI and C-Scan inspections cannot be used within 4 inches of an existing repair doubler edge. Within 4
inches of an existing repair doubler edge, the MFEC or UTPA inspection must be used.
(c) It is acceptable to change inspection procedures from Option 1 to Option 2 or from Option 2 to Option 1
if the inspection is done before the time given in the Repeat Interval column.
(d) Accomplishment of the modification in accordance with Accomplishment Instructions 3.B.3.a. or 3.B.3.b.
or 3.b.3.c. terminates the repeat inspections. Post-modification inspections are specified in Tables 2
through 7 of Paragraph 1.E., Compliance.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
21 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 22

Group 1-5:
Table 2: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat Interval (Not to
Exceed)
Compliance TimeActionCondition
3,900 flight cycles after an
Option 1 inspection.
19,000 flight cycles after
an Option 2 inspection. (a)
Within 50,000 flight cycles
from the time the modifica-
tion doubler is installed.
Do an inspection of the
fuselage skin for cracking
at the outer row of fasten-
ers common to the modifi-
cation doubler in accor-
dance with Accomplish-
ment Instructions 3.B.5.a.
using one of the following
options:
All external modifications
installed in accordance
with this service bulletin.
Option 1: External Low
Frequency Eddy Current
(LFEC)
OR
Option 2: Internal High
Frequency Eddy Current
(HFEC)
4,500 flight cycles after an
Option 1 inspection.
14,000 flight cycles after
an Option 2 inspection. (a)
Within 50,000 flight cycles
from the time the modifica-
tion doubler is installed.
Do an external inspection
of the fuselage skin for
cracking at the outer row
of fasteners common to
the modification filler in ac-
cordance with Accomplish-
ment Instructions
3.B.5.b.(1). using one of
the following inspection
options:
All internal modifications
installed in accordance
with this service bulletin.
Option 1: Do an external
detailed inspection.
OR
Option 2: Do an external
High Frequency Eddy Cur-
rent (HFEC) inspection.
-Before further flight.Contact Boeing for further
instructions and do the
work instructed by Boeing.
Any crack is found in the
skin.
(a) It is acceptable to change inspection procedures from Option 1 to Option 2 or from Option 2 to Option 1
if the inspection is done before the time given in the Repeat Interval column.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
22 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 23

Group 6-7:
Table 3: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat Interval (Not to
Exceed)
Compliance TimeActionCondition
4,500 flight cycles after an
Option 1 inspection.
14,000 flight cycles after
an Option 2 inspection. (a)
Within 50,000 flight cycles
from the time the modifica-
tion doubler is installed.
Do an external inspection
of the fuselage skin for
cracking at the outer row
of fasteners common to
the modification filler in ac-
cordance with Accomplish-
ment Instructions
3.B.5.c.(1). using one of
the following inspection
options:
All internal modifications
installed in accordance
with this service bulletin.
Option 1: Do an external
detailed inspection.
OR
Option 2: Do an external
High Frequency Eddy Cur-
rent (HFEC) inspection.
-Before further flight.Contact Boeing for further
instructions and do the
work instructed by Boeing.
Any crack is found in the
skin.
(a) It is acceptable to change inspection procedures from Option 1 to Option 2 or from Option 2 to Option 1
if the inspection is done before the time given in the Repeat Interval column.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
23 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 24

Group 8:
Table 4: Post Modification Inspection of the fuselage skin at outer fastener rows common to the modifi-
cation parts
Repeat Interval (Not to
Exceed)
Compliance TimeActionCondition
4,500 flight cycles after an
Option 1 inspection.
14,000 flight cycles after
an Option 2 inspection. (a)
Within 50,000 flight cycles
from the time the modifica-
tion doubler is installed.
Do an external inspection
of the fuselage skin for
cracking at the outer row
of fasteners common to
the modification filler in ac-
cordance with Accomplish-
ment Instructions
3.B.5.d.(1). using one of
the following inspection
options:
All internal modifications
installed in accordance
with this service bulletin.
Option 1: Do an external
detailed inspection.
OR
Option 2: Do an external
High Frequency Eddy Cur-
rent (HFEC) inspection.
-Before further flight.Contact Boeing for further
instructions and do the
work instructed by Boeing.
Any crack is found in the
skin.
(a) It is acceptable to change inspection procedures from Option 1 to Option 2 or from Option 2 to Option 1
if the inspection is done before the time given in the Repeat Interval column.
Group 1-5:
Table 5: Post Modification inspection of the fuselage skin at the Chem-mill step
Repeat Interval (Not
to Exceed)
Compliance Time (whichever occurs lat-
er)
ActionCondition
5,500 flight cycles.-Before 50,000 total
flight cycles.
Do an external Non
Destructive Inspec-
tion (NDI) for crack-
ing in the fuselage
skin at the chem-mill
step at the specified
locations in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.b.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin before 32,000
total flight cycles.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
24 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 25

Group 1-5:
Table 5: Post Modification inspection of the fuselage skin at the Chem-mill step
Repeat Interval (Not
to Exceed)
Compliance Time (whichever occurs lat-
er)
ActionCondition
5,500 flight cycles.Within 5,500 flight
cycles from the time
the modification dou-
bler is installed.
Before 43,000 total
flight cycles.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.b.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin after 31,999 to-
tal flight cycles but
before 43,000 total
flight cycles.
5,500 flight cycles.Within 5,500 flight
cycles from the time
the modification dou-
bler is installed.
-Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.b.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin after 42,999 to-
tal flight cycles.
--Before further flight.Contact Boeing for
further instructions
and do the work in-
structed by Boeing.
Any crack is found in
the skin.
Group 6-7:
Table 6: Post Modification inspection of the fuselage skin at the Chem-mill step
Repeat Interval (Not
to Exceed)
Compliance Time (whichever occurs lat-
er)
ActionCondition
5,500 flight cycles.-Before 50,000 total
flight cycles.
Do an external Non
Destructive Inspec-
tion (NDI) for crack-
ing in the fuselage
skin at the chem-mill
step at the specified
locations in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.c.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin before 32,000
total flight cycles.
5,500 flight cycles.Within 5,500 flight
cycles from the time
the modification dou-
bler is installed.
Before 43,000 total
flight cycles.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.c.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin after 31,999 to-
tal flight cycles but
before 43,000 total
flight cycles.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
25 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 26

Group 6-7:
Table 6: Post Modification inspection of the fuselage skin at the Chem-mill step
Repeat Interval (Not
to Exceed)
Compliance Time (whichever occurs lat-
er)
ActionCondition
5,500 flight cycles.Within 5,500 flight
cycles from the time
the modification dou-
bler is installed.
-Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.c.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin after 42,999 to-
tal flight cycles.
--Before further flight.Contact Boeing for
further instructions
and do the work in-
structed by Boeing.
Any crack is found in
the skin.
Group 8:
Table 7: Post Modification inspection of the fuselage skin at the Chem-mill step
Repeat Interval (Not
to Exceed)
Compliance Time (whichever occurs lat-
er)
ActionCondition
5,500 flight cycles.-Before 50,000 total
flight cycles.
Do an external Non
Destructive Inspec-
tion (NDI) for crack-
ing in the fuselage
skin at the chem-mill
step at the specified
locations in accor-
dance with Accom-
plishment Instruc-
tions 3.B.5.d.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin before 32,000
total flight cycles.
5,500 flight cycles.Within 5,500 flight
cycles from the time
the modification dou-
bler is installed.
Before 43,000 total
flight cycles.
Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.d.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin after 31,999 to-
tal flight cycles but
before 43,000 total
flight cycles.
5,500 flight cycles.Within 5,500 flight
cycles from the time
the modification dou-
bler is installed.
-Do an external NDI
for cracking in the
fuselage skin at the
chem-mill step at the
specified locations in
accordance with Ac-
complishment Instruc-
tions 3.B.5.d.(2).
All internal modifica-
tions that were in-
stalled in accordance
with this service bul-
letin after 42,999 to-
tal flight cycles.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
26 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 27

Group 8:
Table 7: Post Modification inspection of the fuselage skin at the Chem-mill step
Repeat Interval (Not
to Exceed)
Compliance Time (whichever occurs lat-
er)
ActionCondition
--Before further flight.Contact Boeing for
further instructions
and do the work in-
structed by Boeing.
Any crack is found in
the skin.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to accomplish this service bulletin for
each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 1:
Table 1: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
2.505.002FIGURE 20
1.501.501FIGURE 24
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
27 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 28

Group 1:
Table 1: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
2.502.501FIGURE 28
2.502.501FIGURE 32
1.501.501FIGURE 36
1.501.501FIGURE 40
1.501.501FIGURE 44
1.501.501FIGURE 52
2.002.001FIGURE 56
2.002.001FIGURE 60
2.254.502FIGURE 72
2.752.751FIGURE 76
1.501.501FIGURE 91
1.001.001Close Access
32.0036.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 1:
Table 2: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
1.501.501FIGURE 16
4.509.002FIGURE 17
2.505.002FIGURE 20
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
28 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 29

Group 1:
Table 2: Modification
Elapsed HoursTask HoursNumber of PersonsTask
15.0060.004FIGURE 21
1.501.501FIGURE 24
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
1.501.501FIGURE 44
4.7519.004FIGURE 45
1.501.501FIGURE 52
4.7519.004FIGURE 53
2.002.001FIGURE 56
17.5070.004FIGURE 57
2.002.001FIGURE 60
17.5070.004FIGURE 61
2.254.502FIGURE 72
14.5087.006FIGURE 73
2.752.751FIGURE 76
13.2553.004FIGURE 77
1.501.501FIGURE 91
19.0019.004FIGURE 95
20.75166.008Close Access
214.25916.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
29 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 30

Group 1:
Table 2: Modification
Elapsed HoursTask HoursNumber of PersonsTask
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 1:
Table 3: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
1.501.501FIGURE 42
1.501.501FIGURE 43
1.501.501FIGURE 46
1.501.501FIGURE 47
1.501.501FIGURE 54
1.501.501FIGURE 55
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
30 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 31

Group 1:
Table 3: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
3.256.502FIGURE 58
0.750.751FIGURE 59
3.256.502FIGURE 62
0.750.751FIGURE 63
3.406.802FIGURE 74
3.406.802FIGURE 75
2.104.202FIGURE 78
2.104.202FIGURE 79
1.501.501FIGURE 96
1.001.001FIGURE 97
1.001.001Close Access
65.5086.00TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 2:
Table 4: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
2.505.002FIGURE 20
1.501.501FIGURE 24
2.502.501FIGURE 28
2.502.501FIGURE 32
1.501.501FIGURE 36
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
31 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 32

Group 2:
Table 4: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.501.501FIGURE 40
1.501.501FIGURE 44
1.501.501FIGURE 52
2.002.001FIGURE 56
2.002.001FIGURE 60
2.254.502FIGURE 72
2.752.751FIGURE 76
1.501.501FIGURE 84
1.501.501FIGURE 91
1.001.001Close Access
33.5038.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 2:
Table 5: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
1.501.501FIGURE 16
4.509.002FIGURE 17
2.505.002FIGURE 20
15.0060.004FIGURE 21
1.501.501FIGURE 24
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
32 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 33

Group 2:
Table 5: Modification
Elapsed HoursTask HoursNumber of PersonsTask
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
1.501.501FIGURE 44
4.7519.004FIGURE 45
1.501.501FIGURE 52
4.7519.004FIGURE 53
2.002.001FIGURE 56
17.5070.004FIGURE 57
2.002.001FIGURE 60
17.5070.004FIGURE 61
2.254.502FIGURE 72
14.5087.006FIGURE 73
2.752.751FIGURE 76
13.2553.004FIGURE 77
1.501.501FIGURE 84
9.5038.004FIGURE 88
1.501.501FIGURE 91
19.0019.004FIGURE 92
20.75166.008Close Access
225.25955.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
33 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 34

Group 2:
Table 5: Modification
Elapsed HoursTask HoursNumber of PersonsTask
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 2:
Table 6: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
1.501.501FIGURE 42
1.501.501FIGURE 43
1.501.501FIGURE 46
1.501.501FIGURE 47
1.501.501FIGURE 54
1.501.501FIGURE 55
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
34 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 35

Group 2:
Table 6: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
3.256.502FIGURE 58
0.750.751FIGURE 59
3.256.502FIGURE 62
0.750.751FIGURE 63
3.406.802FIGURE 74
3.406.802FIGURE 75
2.104.202FIGURE 78
2.104.202FIGURE 79
3.003.001FIGURE 89
3.003.001FIGURE 90
1.501.501FIGURE 93
1.001.001FIGURE 94
1.001.001Close Access
71.5092.00TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 3:
Table 7: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
2.505.002FIGURE 20
1.501.501FIGURE 24
2.502.501FIGURE 28
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
35 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 36

Group 3:
Table 7: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
2.502.501FIGURE 32
1.501.501FIGURE 36
1.501.501FIGURE 40
1.501.501FIGURE 44
1.501.501FIGURE 52
2.002.001FIGURE 64
2.002.001FIGURE 68
2.254.502FIGURE 72
2.752.751FIGURE 76
1.501.501FIGURE 84
1.501.501FIGURE 91
1.001.001Close Access
33.5038.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 3:
Table 8: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
1.501.501FIGURE 16
4.509.002FIGURE 17
2.505.002FIGURE 20
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
36 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 37

Group 3:
Table 8: Modification
Elapsed HoursTask HoursNumber of PersonsTask
15.0060.004FIGURE 21
1.501.501FIGURE 24
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
1.501.501FIGURE 44
4.7519.004FIGURE 45
1.501.501FIGURE 52
4.7519.004FIGURE 53
2.002.001FIGURE 64
17.5070.004FIGURE 65
2.002.001FIGURE 68
17.5070.004FIGURE 69
2.254.502FIGURE 72
14.5087.006FIGURE 73
2.752.751FIGURE 76
13.2553.004FIGURE 77
1.501.501FIGURE 84
9.5038.004FIGURE 88
1.501.501FIGURE 91
19.0019.004FIGURE 92
20.75166.008Close Access
225.25955.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
37 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 38

Group 3:
Table 8: Modification
Elapsed HoursTask HoursNumber of PersonsTask
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 3:
Table 9: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
1.501.501FIGURE 42
1.501.501FIGURE 43
1.501.501FIGURE 46
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
38 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 39

Group 3:
Table 9: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.501.501FIGURE 47
1.501.501FIGURE 54
1.501.501FIGURE 55
3.256.502FIGURE 66
0.750.751FIGURE 67
3.256.502FIGURE 70
0.750.751FIGURE 71
3.406.802FIGURE 74
3.406.802FIGURE 75
2.104.202FIGURE 78
2.104.202FIGURE 79
3.003.001FIGURE 89
3.003.001FIGURE 90
1.501.501FIGURE 93
1.001.001FIGURE 94
1.001.001Close Access
71.5092.00TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 4:
Table 10: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
39 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 40

Group 4:
Table 10: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
2.505.002FIGURE 20
1.501.501FIGURE 24
2.502.501FIGURE 28
2.502.501FIGURE 32
1.501.501FIGURE 36
1.501.501FIGURE 40
1.501.501FIGURE 48
1.501.501FIGURE 52
2.002.001FIGURE 64
2.002.001FIGURE 68
2.254.502FIGURE 72
2.752.751FIGURE 76
1.501.501FIGURE 84
1.501.501FIGURE 91
1.001.001Close Access
33.5038.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 4:
Table 11: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
40 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 41

Group 4:
Table 11: Modification
Elapsed HoursTask HoursNumber of PersonsTask
1.501.501FIGURE 16
4.509.002FIGURE 17
2.505.002FIGURE 20
15.0060.004FIGURE 21
1.501.501FIGURE 24
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
1.501.501FIGURE 48
4.7519.004FIGURE 49
1.501.501FIGURE 52
4.7519.004FIGURE 53
2.002.001FIGURE 64
17.5070.004FIGURE 65
2.002.001FIGURE 68
17.5070.004FIGURE 69
2.254.502FIGURE 72
14.5087.006FIGURE 73
2.752.751FIGURE 76
13.2553.004FIGURE 77
1.501.501FIGURE 84
9.5038.004FIGURE 88
1.501.501FIGURE 91
19.0019.004FIGURE 92
20.75166.008Close Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
41 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 42

Group 4:
Table 11: Modification
Elapsed HoursTask HoursNumber of PersonsTask
225.25955.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 4:
Table 12: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
42 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 43

Group 4:
Table 12: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.501.501FIGURE 42
1.501.501FIGURE 43
1.501.501FIGURE 50
1.501.501FIGURE 51
1.501.501FIGURE 54
1.501.501FIGURE 55
3.256.502FIGURE 66
0.750.751FIGURE 67
3.256.502FIGURE 70
0.750.751FIGURE 71
3.406.802FIGURE 74
3.406.802FIGURE 75
2.104.202FIGURE 78
2.104.202FIGURE 79
3.003.001FIGURE 89
3.003.001FIGURE 90
1.501.501FIGURE 93
1.001.001FIGURE 94
1.001.001Close Access
71.5092.00TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 5:
Table 13: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
43 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 44

Group 5:
Table 13: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
2.505.002FIGURE 20
1.501.501FIGURE 24
2.502.501FIGURE 28
2.502.501FIGURE 32
1.501.501FIGURE 36
1.501.501FIGURE 40
1.501.501FIGURE 44
1.501.501FIGURE 52
2.002.001FIGURE 64
2.002.001FIGURE 68
2.254.502FIGURE 72
2.752.751FIGURE 76
1.501.501FIGURE 84
1.501.501FIGURE 91
1.001.001Close Access
33.5038.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 5:
Table 14: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
44 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 45

Group 5:
Table 14: Modification
Elapsed HoursTask HoursNumber of PersonsTask
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
1.501.501FIGURE 16
4.509.002FIGURE 17
2.505.002FIGURE 20
15.0060.004FIGURE 21
1.501.501FIGURE 24
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
1.501.501FIGURE 44
4.7519.004FIGURE 45
1.501.501FIGURE 52
4.7519.004FIGURE 53
2.002.001FIGURE 56
17.5070.004FIGURE 57
2.002.001FIGURE 60
17.5070.004FIGURE 61
2.254.502FIGURE 72
14.5087.006FIGURE 73
2.752.751FIGURE 76
13.2553.004FIGURE 77
1.501.501FIGURE 84
9.5038.004FIGURE 85
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
45 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 46

Group 5:
Table 14: Modification
Elapsed HoursTask HoursNumber of PersonsTask
1.501.501FIGURE 91
19.0019.004FIGURE 92
20.75166.008Close Access
225.25955.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 5:
Table 15: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
46 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 47

Group 5:
Table 15: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
1.501.501FIGURE 42
1.501.501FIGURE 43
1.501.501FIGURE 46
1.501.501FIGURE 47
1.501.501FIGURE 54
1.501.501FIGURE 55
3.256.502FIGURE 58
0.750.751FIGURE 59
3.256.502FIGURE 62
0.750.751FIGURE 63
3.406.802FIGURE 74
3.406.802FIGURE 75
2.104.202FIGURE 78
2.104.202FIGURE 79
3.003.001FIGURE 86
3.003.001FIGURE 87
1.501.501FIGURE 93
1.001.001FIGURE 94
1.001.001Close Access
71.5092.00TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
47 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 48

Group 6:
Table 16: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
2.505.002FIGURE 20
1.501.501FIGURE 24
2.502.501FIGURE 28
2.502.501FIGURE 32
1.501.501FIGURE 36
1.501.501FIGURE 40
2.752.751FIGURE 80
1.501.501FIGURE 84
1.501.501FIGURE 91
1.001.001Close Access
24.2526.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 6:
Table 17: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
1.501.501FIGURE 16
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
48 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 49

Group 6:
Table 17: Modification
Elapsed HoursTask HoursNumber of PersonsTask
4.509.002FIGURE 17
2.505.002FIGURE 20
15.0060.004FIGURE 21
1.501.501FIGURE 24
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
2.752.751FIGURE 80
13.2553.004FIGURE 81
1.501.501FIGURE 84
9.5038.004FIGURE 88
1.501.501FIGURE 91
19.0019.004FIGURE 92
20.75166.008Close Access
157.00679.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
49 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 50

Group 6:
Table 18: Post Modification Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
1.501.501FIGURE 42
1.501.501FIGURE 43
2.104.202FIGURE 82
2.104.202FIGURE 83
3.003.001FIGURE 89
3.003.001FIGURE 90
1.501.501FIGURE 93
1.001.001FIGURE 94
1.001.001Close Access
50.7057.90TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
50 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 51

Group 6:
Table 18: Post Modification Inspection
Elapsed HoursTask HoursNumber of PersonsTask
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 7:
Table 19: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 4
1.001.001FIGURE 12
1.501.501FIGURE 16
2.505.002FIGURE 20
1.501.501FIGURE 24
2.502.501FIGURE 28
2.502.501FIGURE 32
1.501.501FIGURE 36
1.501.501FIGURE 40
2.752.751FIGURE 80
1.501.501FIGURE 91
1.001.001Close Access
22.7525.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
51 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 52

Group 7:
Table 20: Modification
Elapsed HoursTask HoursNumber of PersonsTask
17.00136.008Open Access
2.002.001FIGURE 4
8.5017.002FIGURE 5
1.001.001FIGURE 12
4.759.502FIGURE 13
1.501.501FIGURE 16
4.509.002FIGURE 17
2.505.002FIGURE 20
15.0060.004FIGURE 21
1.501.501FIGURE 24
4.5018.004FIGURE 25
2.502.501FIGURE 28
9.0036.004FIGURE 29
2.502.501FIGURE 32
9.0036.004FIGURE 33
1.501.501FIGURE 36
9.5038.004FIGURE 37
1.501.501FIGURE 40
4.7519.004FIGURE 41
2.752.751FIGURE 80
13.2553.004FIGURE 81
1.501.501FIGURE 91
19.0019.004FIGURE 95
20.75166.008Close Access
146.00639.75TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
52 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 53

Group 7:
Table 20: Modification
Elapsed HoursTask HoursNumber of PersonsTask
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 7:
Table 21: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.502.501FIGURE 6
0.800.801FIGURE 7
0.750.751FIGURE 14
0.750.751FIGURE 15
1.751.751FIGURE 18
0.750.751FIGURE 19
3.006.002FIGURE 22
1.201.201FIGURE 23
1.501.501FIGURE 26
1.501.501FIGURE 27
3.003.001FIGURE 30
3.003.001FIGURE 31
3.003.001FIGURE 34
3.003.001FIGURE 35
3.003.001FIGURE 38
3.003.001FIGURE 39
1.501.501FIGURE 42
1.501.501FIGURE 43
2.104.202FIGURE 82
2.104.202FIGURE 83
1.501.501FIGURE 93
1.001.001FIGURE 94
1.001.001Close Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
53 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 54

Group 7:
Table 21: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
44.7051.90TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 8:
Table 22: Chem-mill Step Inspection
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
2.002.001FIGURE 8
2.502.501FIGURE 32
2.752.751FIGURE 80
1.501.501FIGURE 84
1.501.501FIGURE 91
1.001.001Close Access
12.2512.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 8:
Table 23: Modification
Elapsed HoursTask HoursNumber of PersonsTask
5.7546.008Open Access
1.001.001FIGURE 8
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
54 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 55

Group 8:
Table 23: Modification
Elapsed HoursTask HoursNumber of PersonsTask
8.5017.002FIGURE 9
2.502.501FIGURE 32
9.0036.004FIGURE 33
2.752.751FIGURE 80
13.2553.004FIGURE 81
1.501.501FIGURE 84
9.5038.004FIGURE 88
1.501.501FIGURE 91
4.7519.004FIGURE 92
7.0056.008Close Access
68.00275.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d) (e) (f)
(a) Estimates do not include time to manufacture parts. Time to manufacture parts is con-
sidered lost time in Boeing estimates.
(b) Totals shown do not include time to test disturbed systems.
(c) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(d) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(e) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(f) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
Group 8:
Table 24: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
1.001.001Open Access
1.051.051FIGURE 10
0.800.801FIGURE 11
3.003.001FIGURE 34
3.003.001FIGURE 35
2.104.202FIGURE 82
2.104.202FIGURE 83
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
55 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 56

Group 8:
Table 24: Post Modification Inspections
Elapsed HoursTask HoursNumber of PersonsTask
3.003.001FIGURE 89
3.003.001FIGURE 90
1.501.501FIGURE 93
1.501.501FIGURE 94
1.001.001Close Access
23.0527.25TOTAL FOR EACH AIRPLANE (a) (b) (c) (d)
(a) Figures where C-Scan method is an option, factors for C-Scan inspection method were
used in the estimate.
(b) For the optional Medium Frequency Eddy Current (MFEC) Inspection, multiply the esti-
mates given by a factor of 5.
(c) For the optional Magneto Optical Imaging (MOI) Inspection, multiply the estimates given
by a factor of 1.5.
(d) For the optional Ultrasonic Phased Array (UTPA) Inspection, multiply the estimates
given by a factor of 12.
H. Weight and Balance Changes
Group 1:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
5302.1EP1
1450.5EP2
3101.0TCAS
12603.6ATC
3901.0TACAN
8001.9SAT 1
8001.9SAT 2
10802.4GPS
4701.0MLS
5701.0ACL
6301.0ELT 1
34805.6OVW 1
34805.6OVW 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
56 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 57

Group 1:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
34505.0ADF 1
28403.8ADF 2
9001.0ELT 2
(a) As modifications are accomplished for each applicable airplane, add the Change in
Weight values, and the Change in Moment values for each modification location accom-
plished.
Group 2:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
5302.1EP1
1450.5EP2
3101.0TCAS
12603.6ATC
3901.0TACAN
8001.9SAT 1
8001.9SAT 2
10802.4GPS
4701.0MLS
5701.0ACL
6301.0ELT 1
34805.6OVW 1
34805.6OVW 2
34505.0ADF 1
28403.8ADF 2
22502.6SAT 3
9001.0ELT 2
(a) As modifications are accomplished for each applicable airplane, add the Change in
Weight values, and the Change in Moment values for each modification location accom-
plished.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
57 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 58

Group 3:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
5302.1EP1
1450.5EP2
3101.0TCAS
12603.6ATC
3901.0TACAN
8001.9SAT 1
8001.9SAT 2
10802.4GPS
4701.0MLS
5701.0ACL
6301.0ELT 1
34805.6OVW 1
34805.6OVW 2
34505.0ADF 1
28403.8ADF 2
22502.6SAT 3
9001.0ELT 2
(a) As modifications are accomplished for each applicable airplane, add the Change in
Weight values, and the Change in Moment values for each modification location accom-
plished.
Group 4:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
5302.1EP1
1450.5EP2
3101.0TCAS
12603.6ATC
3901.0TACAN
8001.9SAT 1
8001.9SAT 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
58 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 59

Group 4:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
10802.4GPS
4701.0MLS
16502.9ACL
6301.0ELT 1
34805.6OVW 1
34805.6OVW 2
34505.0ADF 1
28403.8ADF 2
22502.6SAT 3
9001.0ELT 2
(a) As modifications are accomplished for each applicable airplane, add the Change in
Weight values, and the Change in Moment values for each modification location accom-
plished.
Group 5:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
5302.1EP1
1450.5EP2
3101.0TCAS
12603.6ATC
3901.0TACAN
8001.9SAT 1
8001.9SAT 2
10802.4GPS
4701.0MLS
5701.0ACL
6301.0ELT 1
34805.6OVW 1
34805.6OVW 2
34505.0ADF 1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
59 of 467
BOEING SERVICE BULLETIN 737-53-1310

### Page 60

Group 5:
737-700 Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 1)
28403.8ADF 2
20802.2SAT 3
9001.0ELT 2
(a) As modifications are accomplished for each applicable airplane, add the Change in
Weight values, and the Change in Moment values for each modification location accom-
plished.
Group 6:
737-700 Increased Gross Weight Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 2)
5302.1EP1
1450.5EP2
3101.0TCAS
12603.6ATC
3901.0TACAN
8001.9SAT 1
8001.9SAT 2
10802.4GPS
8301.1ADF 2
22502.6SAT 3
9001.0ELT 2
(a) As modifications are accomplished for each applicable airplane, add the Change in
Weight values, and the Change in Moment values for each modification location accom-
plished.
Group 7:
737-700 Increased Gross Weight Airplanes
Change in Moment
(Pound-Inches) (a)
Change in Weight
(Pounds) (a)Location ID (Refer to FIGURE 2)
5302.1EP1
1450.5EP2
3101.0TCAS
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 20, 2011
737-53-1310
60 of 467
BOEING SERVICE BULLETIN 737-53-1310

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-53-1310/file/d912d5ebeda0.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
