# Boeing Special Attention Service Bulletin 737-53-1313: No revision named

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2012-0491; AD 2012-20-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Special Attention Service Bulletin 737-53-1313](https://openairdocs.org/service-documents/boeing/sb-737-53-1313.md)
- Title as filed: U.S. DOT/FAA - Service Information
- Pages: 83
- PDF: https://openairdocs.org/files/sha256/53/2d/532d630616e874b4f46f8af24ea704d3235d8f9e396bda6b3bd7270c093399a7
- Page: https://openairdocs.org/service-documents/boeing/sb-737-53-1313/file/532d630616e8

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1313
Original Issue: November 03, 2011
ATA System: 5311 5331
SUBJECT: FUSELAGE - Frames and Bulkheads - Upper Butt Strap at Body Station 908 - Inspection
and Repair
Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15
CFR 730-774). An export license may be required before it is used for development, production or use by foreign
persons from specific countries. The controller of this data has the individual responsibility to abide by all export
laws.
9E991ECCN:
BOEING PROPRIETARY, CONFIDENTIAL, AND/OR TRADE SECRET
Copyright © 2011 The Boeing Company
Unpublished Work - All Rights Reserved
Boeing claims copyright in each page of this document only to the extent that the page contains copyrightable
subject matter. Boeing also claims copyright in this document as a compilation and/or collective work.
This document includes proprietary information owned by The Boeing Company and/or one or more third parties.
Treatment of the document and the information it contains is governed by contract with Boeing. For more
information, contact The Boeing Company, P.O. Box 3707, Seattle, Washington 98124.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner,
BBJ, DC-8, DC-9, DC-10, KC-10, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8A, Poseidon and the
Boeing livery are all trademarks owned by The Boeing Company; and no trademark license is granted in
connection with this document unless provided in writing by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
1 of 83
3.0

### Page 2

BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
2 of 83
BOEING SERVICE BULLETIN 737-53-1313
BLANK PAGE

### Page 3

Table of Contents
Summary ...................................................... 5
1. PLANNING INFORMATION ........................................ 9
A. Effectivity ................................................ 9
1. Airplanes ............................................. 9
2. Spares Affected ........................................ 1 6
B. Concurrent Requirements ...................................... 1 6
C. Reason ................................................ 1 6
D. Description .............................................. 1 6
E. Compliance .............................................. 1 8
F. Approval ............................................... 2 5
G. Manpower .............................................. 2 5
H. Weight and Balance Changes .................................... 2 7
I. Electrical Load Data ......................................... 2 7
J. References .............................................. 2 7
1. Existing Data .......................................... 2 7
2. Data supplied with this Service Bulletin ............................ 2 7
3. Installation Drawings Used in the Preparation of this Service Bulletin ............ 2 7
K. Publications Affected ........................................ 2 8
L. Interchangeability and Intermixability of Parts ........................... 2 8
2. MATERIAL INFORMATION ........................................ 2 9
A. Material - Price and Availability ................................... 2 9
B. Industry Support Information .................................... 2 9
C. Parts Necessary For Each Airplane ................................. 2 9
1. Kits/Parts ............................................ 2 9
2. Parts and Materials Supplied by the Operator ........................ 2 9
3. Parts Modified and Reidentified ................................ 3 0
4. Parts Removed and Not Replaced .............................. 3 0
D. Parts Necessary to Change Spares ................................. 3 0
E. Special Tooling - Price and Availability ............................... 3 0
F. Special Tooling Necessary to do this Service Bulletin ....................... 3 0
3. ACCOMPLISHMENT INSTRUCTIONS .................................. 3 1
A. GENERAL INFORMATION ..................................... 3 1
B. WORK INSTRUCTIONS ....................................... 3 2
FIGURE 1: STA 908 SKIN - INSPECTION OPTION 1 - EXTERNAL DETAILED INSPECTION [Group 2-3]
.................................................. 3 9
FIGURE 2: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 2 - EXTERNAL LFEC INSPECTION
[Group 2-3] ........................................... 4 2
FIGURE 3: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 3 - INTERNAL LFEC INSPECTION
[Group 2-3] ........................................... 4 5
FIGURE 4: STA 908 UPPER BUTT STRAP - CHEMICAL SPOT TEST [Group 2-3] .......... 4 7
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL [Group 2-3] .................. 4 9
FIGURE 6: STA 908 UPPER BUTT STRAP - OPEN HOLE HFEC INSPECTION [Group 2-3] ..... 5 6
FIGURE 7: STA 908 UPPER BUTT STRAP - MAKE [Group 2-3] .................... 5 8
FIGURE 8: STA 908 UPPER BUTT STRAP - REPLACEMENT [Group 2, Configuration 1; Group 3] . 60
FIGURE 9: STA 908 UPPER BUTT STRAP - REPLACEMENT [Group 2, Configuration 2] ....... 7 1
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
3 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 4

APPENDIX A: CHEMICAL SPOT TEST PROCEDURE ........................... 8 2
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
4 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 5

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
SummaryNumber: 737-53-1313Original Issue: November 03, 2011
ATA System: 5311 5331
SUBJECT: FUSELAGE - Frames and Bulkheads - Upper Butt Strap at Body Station 908 - Inspection
and Repair
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
CONCURRENT REQUIREMENTS
None.
BACKGROUND
This Service Bulletin describes inspection methods to determine if the correct aluminum alloy was used to make
the Station (STA) 908, Stringer S-4L to S-4R upper butt strap. Butt straps that have been fabricated using an
incorrect aluminum alloy can result in cracking at the upper row of each butt strap splice at STA 908, above
S-4R and S-4L. If a crack is undetected, cracks at the adjacent mating skins (forward and aft) could initiate just
above S-4R and S-4L. These skin cracks could grow and result in a decompression event.
One operator has reported for one aircraft, forward skin and bonded doubler cracks and a severed upper butt
strap. Lab analysis of the upper butt strap identified 7075-T6 alloy instead of drawing required 2024-T3 clad
material. The airplane had accumulated approximately 61,000 flight cycles and 58,000 flight hours. The skin
crack was found just above a previously installed service bulletin 737-53A1177 lap joint modification.
Boeing Service Related Problem (SRP) 737-SRP-53-0340 is related to this service bulletin.
ACTION
Group 1:
On Group 1 airplanes, contact Boeing to get instructions for the inspection, and/or repair for this service bulletin,
737-53-1313, and do the work instructed by Boeing.
Group 2, Configuration 1; Group 3:
Do a detailed inspection of the forward and aft skin at STA 908 or a Low Frequency Eddy Current (LFEC)
inspection of the upper butt strap at STA 908, for cracks. If any crack is found in the skin, contact Boeing for
repair instructions and do the work instructed by Boeing. If any crack is found in the upper butt strap, remove
the strap and do a detailed inspection of the skin, skin doubler and lower butt strap for corrosion and do an open
hole High Frequency Eddy Current (HFEC) inspection of all accessed holes in the skin, skin doubler, lower butt
strap and stringer splices. If any corrosion is found, contact Boeing for repair instructions and do the work
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
5 of 83

### Page 6

instructed by Boeing. If any crack is found in the skin, skin doubler or lower butt strap contact Boeing for repair
instructions and do the work instructed by Boeing. If any crack is found in a stringer splice, install a new stringer
splice. If no cracking is found in the skin, skin doubler and lower butt strap and cracking is found in the upper
butt strap, install a new upper butt strap with an insurance cut at the strap upper splice row at the time given in
Paragraph 1.E., Compliance.
Group 2, Configuration 1; Group 3:
Do a chemical spot test on the STA 908 upper butt strap. If the strap is found to be made from 2000 series
aluminum, no further action is necessary. If the strap is found to be made from 7000 series aluminum, remove
the strap and do a detailed inspection of the skin, skin doubler and lower butt strap for corrosion and do an open
hole HFEC inspection of the removed strap and all accessed holes in the skin, skin doubler, lower butt strap
and stringer splices. If any corrosion is found, contact Boeing for repair instructions and do the work instructed
by Boeing. If any crack is found in the skin, skin doubler or lower butt strap, contact Boeing for repair instructions
and do the work instructed by Boeing. If any crack is found in a stringer splice, install a new stringer splice. If
no cracking is found in the skin, skin doubler and lower butt strap and cracking is found in the upper butt strap,
install a new upper butt strap with an insurance cut at the strap upper splice row at the time given in Paragraph
1.E., Compliance. If no cracking is found in the skin, skin doubler, lower butt strap and upper butt strap, install
a new upper butt strap without an insurance cut at the strap upper splice row at the time given in Paragraph
1.E., Compliance.
Group 2, Configuration 2:
Do a detailed inspection of the forward and aft skin at STA 908 or a LFEC inspection of the upper butt strap at
STA 908, for cracks. If any crack is found in the skin or upper butt strap, contact Boeing for repair instructions
and do the work instructed by Boeing.
Group 2, Configuration 2:
Do a chemical spot test on the STA 908 upper butt strap. If the strap is found to be made from 2000 series
aluminum, no further action is necessary. If the strap is found to be made from 7000 series aluminum, remove
the strap and do a detailed inspection of the skin, skin doubler and lower butt strap for corrosion and do an open
hole HFEC inspection of the removed strap and all accessed holes in the skin, skin doubler, lower butt strap
and stringer splices. If any corrosion is found, contact Boeing for repair instructions and do the work instructed
by Boeing. If any crack is found in the skin, skin doubler or lower butt strap, contact Boeing for repair instructions
and do the work instructed by Boeing. If any crack is found in a stringer splice, install a new stringer splice. If
any crack is found in the upper butt strap, contact Boeing for repair instructions and do the work instructed by
Boeing. If no cracking is found in the skin, skin doubler, lower butt strap and upper butt strap, install a new upper
butt strap at the time given in Paragraph 1.E., Compliance.
EFFECTIVITY
All 737-100/-200/-200C Airplanes. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes.
COMPLIANCE
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin
mandatory.
Refer to Paragraph 1.E., Compliance.
INDUSTRY SUPPORT INFORMATION
Boeing warranty remedies are available for airplanes in warranty as of December 04, 2008. Please refer to
Paragraph 2.B., Industry Support Information.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
6 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 7

MANPOWER
Elapsed HoursTotal Task HoursAirplanes
53.00256.75Group 2 and 3
MATERIAL INFORMATION
Operator Supplied Parts/Materials.
Refer to Paragraph 2.A., Material - Price and Availability
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
7 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 8 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
STA
908
- S-4R
STA
908
STA
727
000000001  - S-3R
S-4R
S-4L
UPPER BUTT STRAP  • S-2R
DO A CHEMICAL SPOT TEST OF THE STA
908 UPPER BUTT STRAP TO DETERMINE
THE PART MATERIAL.
IF THE STRAP IS FOUND TO BE MADE OF
7000 SERIES ALUMINUM, REPLACE THE
STRAP AT THE TIME GIVEN IN
PARAGRAPH 1.E., COMPLIANCE OR
CONTACT BOEING FOR REPAIR.  - S-1
DO INSPECTIONS OF THE SKIN OR
UPPER BUTT STRAP FOR CRACKS AT
THE INSPECTION AREA. IF THE SKIN IS
CRACKED, CONTACT BOEING FOR
REPAIR. IF THE STRAP IS CRACKED,
REPLACE THE STRAP AT THE TIME
GIVEN IN PARAGRAPH 1.E., COMPLIANCE  - S-2L
OR CONTACT BOEING FOR REPAIR
IF STRAP IS MADE OF 7000 SERIES
ALUMINUM THEN DO A HFEC INSPECTION
OF ALL OPEN HOLES AFTER STRAP
REMOVAL. DO A HFEC INSPECTION OF THE
REMOVED STRAP AT THE INSPECTION
AREA. IF THE SKIN IS CRACKED, CONTACT  • S-3L
BOEING FOR REPAIR. REPLACE ALI
CRACKED STRINGER SPLICES. IF THE
STRAP IS CRACKED, REPLACE THE STRAP
AT THE TIME GIVEN IN PARAGRAPH 1.E
COMPLIANCE OR CONTACT BOEING FOR
REPAIR.
- S-4L
FWD
SKIN/UPPER BUTT STRAP  2043485
INSPECTION AREA  A-A
Original Issue: November 03, 2011
737-53-1313
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  8 of 83

### Page 9

Commercial 
Airplanes
737
Service Bulletin
SPECIAL ATTENTION
Number: 737-53-1313
Original Issue: November 03, 2011
ATA System: 5311 5331
SUBJECT: FUSELAGE - Frames and Bulkheads - Upper Butt Strap at Body Station 908 - Inspection
and Repair
BOEING RECOMMENDS THAT EACH OPERATOR EXAMINE THIS SERVICE BULLETIN IMMEDIATELY.
1.    PLANNING INFORMATION
A. Effectivity
1. Airplanes
This service bulletin is for the airplane(s) shown below.
Refer to Service Bulletin Index Document D6-19567 Part 3 for Airplane Variable Number, Line
Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP
737-100, -200, -200C Airplanes up to line number 291.-1
737-200, -200C Airplanes line number 292-519.-2
Airplanes that have not accomplished the preventive modification in
accordance with Service Bulletin 737-53-1076.
1
Airplanes that have accomplished the preventive modification in
accordance with Service Bulletin 737-53-1076.
2
737-200, 200C Airplanes line number 520-1585.-3
Airplane Models:
737-100, 737-200, 737-200C
GroupVariable Number
1PA001 - PA022
1PA099
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
9 of 83

### Page 10

GroupVariable Number
1PA231 - PA232
1PC001 - PC005
1PG001 - PG075
1PG199
1PG201 - PG230
1PG251 - PG255
1PG271 - PG279
1PG301 - PG314
1PG331 - PG332
1PG351 - PG356
1PG375
1PG401 - PG403
1PG431 - PG442
1PG471 - PG475
1PG501 - PG505
1PG571 - PG583
2PG584 - PG586
1PG621 - PG630
1PG651 - PG652
1PG701 - PG705
2PH001
2PH011 - PH013
2PH021 - PH024
1PH701 - PH715
1PH731 - PH732
1PH741 - PH742
2PH743
1PJ001 - PJ002
2PJ003 - PJ006
3PJ007 - PJ009
1PJ031 - PJ032
1PJ071 - PJ072
1PJ101 - PJ104
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
10 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 11

GroupVariable Number
2PJ105 - PJ111
3PJ112 - PJ119
2PJ201 - PJ219
2PK026 - PK029
2PK041 - PK053
2PK061 - PK070
2PK081
3PK082
2PK091 - PK099
2PK101 - PK103
2PK111 - PK120
2PK141 - PK146
2PK201 - PK203
3PK204
2PK211 - PK212
3PK213 - PK220
2PK221
3PK222 - PK223
2PK231 - PK235
3PK236 - PK240
2PK241
2PK251 - PK258
2PK271 - PK273
3PK274
2PK281
3PK282 - PK289
2PK291
2PK301 - PK306
3PK307 - PK310
2PK311 - PK315
3PK316 - PK318
2PK341
2PK351 - PK353
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
11 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 12

GroupVariable Number
3PK354 - PK361
2PK391
3PK431 - PK433
2PK451 - PK452
2PK461 - PK465
3PK466 - PK469
3PK495
2PK501
3PK502 - PK504
2PK511
3PK512 - PK515
3PK519
2PK521
3PK522 - PK528
3PK541 - PK565
3PK581
3PK591 - PK599
3PK601 - PK617
3PK621 - PK637
3PK641 - PK642
3PK661 - PK666
3PK671 - PK681
3PK691 - PK697
3PK711 - PK716
3PK731 - PK765
3PK771 - PK779
3PK801 - PK804
3PK819 - PK827
3PK830
3PK861 - PK863
3PK871 - PK874
3PK881 - PK884
3PK901 - PK938
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
12 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 13

GroupVariable Number
3PK971 - PK974
2PL001 - PL002
3PL003 - PL028
3PL061
3PL081
3PL101 - PL113
3PL151
3PL171 - PL172
3PL201 - PL203
3PL221
3PL401 - PL417
3PL421
3PL441
3PL451 - PL456
3PL471
3PL491
3PL501 - PL506
3PL551 - PL562
3PL581
3PL601 - PL603
3PL611
3PL621 - PL626
3PL631 - PL632
1PL711 - PL712
1PL716
2PL717 - PL743
3PL744 - PL747
2PL756
2PL758
2PL761 - PL767
3PL768 - PL770
2PL781 - PL782
3PL783 - PL788
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
13 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 14

GroupVariable Number
2PL793
1PL801 - PL803
3PM001 - PM006
3PM016 - PM017
3PM021 - PM023
3PM051 - PM066
3PM101 - PM119
3PM141 - PM142
3PM171
3PM181
3PM251 - PM255
3PM281 - PM283
3PN001 - PN002
3PN021 - PN043
3PN081 - PN086
3PN101 - PN117
3PN131 - PN163
3PN401 - PN420
3PN431 - PN433
3PN451 - PN456
3PN471 - PN474
3PN481
3PN491 - PN493
3PN501 - PN502
3PN511 - PN512
3PN521
1PX071
1PX701
1PY001 - PY008
1PY021
2PY022
1PY031
2PY036 - PY037
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
14 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 15

GroupVariable Number
2PY046 - PY048
2PY051 - PY053
3PY056 - PY057
2PY101 - PY103
2PY111 - PY113
2PY131 - PY133
3PY134 - PY135
2PY141 - PY143
2PY151 - PY152
3PY153 - PY154
2PY156 - PY157
2PY161 - PY162
2PY166
2PY191
2PY201
2PY221 - PY222
3PY231
3PY241 - PY244
3PY270
2PY271 - PY274
3PY275
2PY281
2PY286
1PY301 - PY304
1PY321 - PY323
1PY341 - PY346
1PY361 - PY362
1PY381
3PY401
3PY409 - PY411
3PY421 - PY422
3PY441
3PY451
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
15 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 16

GroupVariable Number
3PY461 - PY463
3PY591 - PY595
3PY611 - PY612
3PY621
3PY631
3PY651
3PY671 - PY672
3PY721
3PY741
2. Spares Affected
None.
B. Concurrent Requirements
None.
C. Reason
This Service Bulletin describes inspection methods to determine if the correct aluminum alloy was used
to make the Station (STA) 908, Stringer S-4L to S-4R upper butt strap. Butt straps that have been
fabricated using an incorrect aluminum alloy can result in cracking at the upper row of each butt strap
splice at STA 908, above S-4R and S-4L. If a strap crack is undetected, cracks at the adjacent mating
skins (forward and aft) could initiate just above S-4R and S-4L. These skin cracks could grow and result
in a decompression event.
One operator has reported for one aircraft, forward skin and bonded doubler cracks and a severed
upper butt strap. Lab analysis of the upper butt strap identified 7075-T6 alloy instead of drawing required
2024-T3 clad material. The airplane had accumulated approximately 61,000 flight cycles and 58,000
flight hours. The skin crack was found just above a previously installed service bulletin 737-53A1177
lap joint modification.
Boeing Service Related Problem (SRP) 737-SRP-53-0340 is related to this service bulletin.
D. Description
Group 1:
On Group 1 airplanes, contact Boeing to get instructions for the inspection, and/or repair for this service
bulletin, 737-53-1313, and do the work instructed by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
16 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 17

Group 2, Configuration 1; Group 3:
Do a detailed inspection of the forward and aft skin at STA 908 or a Low Frequency Eddy Current
(LFEC) inspection of the upper butt strap at STA 908, for cracks. If any crack is found in the skin,
contact Boeing for repair instructions and do the work instructed by Boeing. If any crack is found in the
upper butt strap, remove the strap and do a detailed inspection of the skin, skin doubler and lower butt
strap for corrosion and do an open hole High Frequency Eddy Current (HFEC) inspection of all accessed
holes in the skin, skin doubler, lower butt strap and stringer splices. If any corrosion is found, contact
Boeing for repair instructions and do the work instructed by Boeing. If any crack is found in the skin,
skin doubler or lower butt strap contact Boeing for repair instructions and do the work instructed by
Boeing. If any crack is found in a stringer splice, install a new stringer splice. If no cracking is found in
the skin, skin doubler and lower butt strap and cracking is found in the upper butt strap, install a new
upper butt strap with an insurance cut at the strap upper splice row at the time given in Paragraph 1.E.,
Compliance.
Group 2, Configuration 1; Group 3:
Do a chemical spot test on the STA 908 upper butt strap. If the strap is found to be made from 2000
series aluminum, no further action is necessary. If the strap is found to be made from 7000 series
aluminum, remove the strap and do a detailed inspection of the skin, skin doubler and lower butt strap
for corrosion and do an open hole HFEC inspection of the removed strap and all accessed holes in
the skin, skin doubler, lower butt strap and stringer splices. If any corrosion is found, contact Boeing
for repair instructions and do the work instructed by Boeing. If any crack is found in the skin, skin doubler
or lower butt strap, contact Boeing for repair instructions and do the work instructed by Boeing. If any
crack is found in a stringer splice, install a new stringer splice. If no cracking is found in the skin, skin
doubler and lower butt strap and cracking is found in the upper butt strap, install a new upper butt strap
with an insurance cut at the strap upper splice row at the time given in Paragraph 1.E., Compliance. If
no cracking is found in the skin, skin doubler, lower butt strap and upper butt strap, install a new upper
butt strap without an insurance cut at the strap upper splice row at the time given in Paragraph 1.E.,
Compliance.
Group 2, Configuration 2:
Do a detailed inspection of the forward and aft skin at STA 908 or a LFEC inspection of the upper butt
strap at STA 908, for cracks. If any crack is found in the skin or upper butt strap, contact Boeing for
repair instructions and do the work instructed by Boeing.
Group 2, Configuration 2:
Do a chemical spot test on the STA 908 upper butt strap. If the strap is found to be made from 2000
series aluminum, no further action is necessary. If the strap is found to be made from 7000 series
aluminum, remove the strap and do a detailed inspection of the skin, skin doubler and lower butt strap
for corrosion and do an open hole HFEC inspection of the removed strap and all accessed holes in
the skin, skin doubler, lower butt strap and stringer splices. If any corrosion is found, contact Boeing
for repair instructions and do the work instructed by Boeing. If any crack is found in the skin, skin doubler
or lower butt strap, contact Boeing for repair instructions and do the work instructed by Boeing. If any
crack is found in a stringer splice, install a new stringer splice. If any crack is found in the upper butt
strap, contact Boeing for repair instructions and do the work instructed by Boeing. If no cracking is
found in the skin, skin doubler, lower butt strap and upper butt strap, install a new upper butt strap at
the time given in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
17 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 18

Group 1:
Affected Maintenance Zones
ZoneModel
1-8, 1-9737-100, 737-200, 737-200C
Group 2-3:
Affected Maintenance Zones
ZoneModel
1-8, 1-9737-200, 737-200C
E. Compliance
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this
service bulletin mandatory.
Group 1:
On Group 1 airplanes, contact Boeing to get instructions for the inspection, and/or repair for this service
bulletin, 737-53-1313, and do the work instructed by Boeing before further flight.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
18 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 19

Group 2, Configuration 1; Group 3:
Table 1: STA 908 Upper Butt Strap - Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
500 flight cycles (a)
(b)
Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Inspection Option 1:
Do a detailed inspection
of the STA 908 forward
and aft skin for cracks in
accordance with Para-
graph 3.B., Work Instruc-
tions Part 2.
All Airplanes
(a) (b)
OR
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Inspection Option 2:
Do an external LFEC in-
spection of the STA 908
upper butt strap for
cracks in accordance with
Paragraph 3.B., Work In-
structions Part 2.
(a) (b)
OR
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Inspection Option 3:
Do an internal LFEC in-
spection of the STA 908
upper butt strap for
cracks in accordance with
Paragraph 3.B., Work In-
structions Part 2.
(a) (b)
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the skin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
19 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 20

Group 2, Configuration 1; Group 3:
Table 1: STA 908 Upper Butt Strap - Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.Remove the STA 908 up-
per butt strap and do a
detailed inspection of the
skin, skin doubler and
lower butt strap for corro-
sion in accordance with
Paragraph 3.B., Work In-
structions Part 4.
Any crack found in the STA
908 upper butt strap.
AND
-Before further flight.Do an open hole HFEC
inspection of the skin,
skin doubler, lower butt
strap and stringer splices
for cracks in accordance
with Paragraph 3.B.,
Work Instructions Part 6.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any corrosion found in the
skin, skin doubler or lower
butt strap.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the skin,
skin doubler or lower butt
strap.
-Before further flight.Install new stringer splice
in accordance with Para-
graph 3.B., Work Instruc-
tions Part 6.
Any crack found in the
stringer splices.
-Before further flight.Install a new STA 908
upper butt strap with an
insurance cut at the strap
upper splice row in accor-
dance with Paragraph
3.B., Work Instructions
Part 6.
No cracking found in the
skin, skin doubler and low-
er butt strap and cracking
is found in the STA 908
upper butt strap.
(b)
(a) Confirmation of 2000 series aluminum material in accordance with Paragraph 3.B., Work Instructions
Part 3 terminates the inspections given in this service bulletin.
(b) Replacement of the STA 908 upper butt strap in accordance with Paragraph 3.B., Work Instructions Part
4 and Part 6 terminates the inspections given in this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
20 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 21

Group 2, Configuration 1; Group 3:
Table 2: STA 908 Upper Butt Strap - Test for Part Material
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Do a chemical spot test
of the STA 908 upper butt
strap to determine the
part material in accor-
dance with Paragraph
3.B., Work Instructions
Part 3.
All Airplanes
---No further action as pro-
vided by this service bul-
letin is necessary.
STA 908 upper butt strap
confirmed to be made of
2000 series aluminum. (a)
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Remove the STA 908 up-
per butt strap and do a
detailed inspection of the
skin, skin doubler and
lower butt strap for corro-
sion in accordance with
Paragraph 3.B., Work In-
structions Part 4.
STA 908 upper butt strap
confirmed to be made of
7000 series aluminum. (c)
AND
Do an open hole HFEC
inspection of the removed
STA 908 upper butt strap
for cracks in accordance
with Paragraph 3.B.,
Work Instructions Part 5.
AND
Do an open hole HFEC
inspection of the skin,
skin doubler, lower butt
strap and stringer splices
for cracks in accordance
with Paragraph 3.B.,
Work Instructions Part 6.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any corrosion found in the
skin, skin doubler or lower
butt strap.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the skin,
skin doubler or lower butt
strap.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
21 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 22

Group 2, Configuration 1; Group 3:
Table 2: STA 908 Upper Butt Strap - Test for Part Material
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.Install a new stringer
splice in accordance with
Paragraph 3.B., Work In-
structions Part 6.
Any crack found in a
stringer splice.
-Before further flight.Install a new STA 908
upper butt strap with an
insurance cut at the strap
upper splice row in accor-
dance with Paragraph
3.B., Work Instructions
Part 6.
No cracking found in the
skin, skin doubler and low-
er butt strap and cracking
is found in the STA 908
upper butt strap.
(b)
-Before further flight.Install a new STA 908
upper butt strap without
an insurance cut at the
strap upper splice row in
accordance with Para-
graph 3.B., Work Instruc-
tions Part 6.
No cracking found in the
skin, skin doubler and low-
er butt strap and no crack-
ing is found in the STA 908
upper butt strap.
(b)
(a) Confirmation of 2000 series aluminum material in accordance with Paragraph 3.B., Work Instructions
Part 3 terminates the inspections given in this service bulletin.
(b) Replacement of the STA 908 upper butt strap in accordance with Paragraph 3.B., Work Instructions Part
4, Part 5 and Part 6 terminates the inspections given in this service bulletin.
(c) Confirmation of 7000 series aluminum material in accordance with Paragraph 3.B., Work Instructions
Part 3.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
22 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 23

Group 2, Configuration 2:
Table 3: STA 908 Upper Butt Strap - Inspection
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
500 flight cycles (a)Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Inspection Option 1:
Do a detailed inspection
of the STA 908 forward
and aft skin for cracks in
accordance with Para-
graph 3.B., Work Instruc-
tions Part 2.
All Airplanes
(a)
OR
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Inspection Option 2:
Do an external LFEC in-
spection of the STA 908
upper butt strap for
cracks in accordance with
Paragraph 3.B., Work In-
structions Part 2.
(a)
OR
-Within 1,000
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Inspection Option 3:
Do an internal LFEC in-
spection of the STA 908
upper butt strap for
cracks in accordance with
Paragraph 3.B., Work In-
structions Part 2.
(a)
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the skin.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the STA
908 upper butt strap.
(a) Confirmation of 2000 series aluminum material in accordance with Paragraph 3.B., Work Instructions
Part 3 terminates the inspections given in this service bulletin.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
23 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 24

Group 2, Configuration 2:
Table 4: STA 908 Upper Butt Strap - Test for Part Material
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Do a chemical spot test
of the STA 908 upper butt
strap to determine the
part material in accor-
dance with Paragraph
3.B., Work Instructions
Part 3.
All Airplanes
---No further action as pro-
vided by this service bul-
letin is necessary.
STA 908 upper butt strap
confirmed to be made of
2000 series aluminum. (a)
-Within 4,500
flight cycles af-
ter the original
issue date of
this service bul-
letin.
Before 40,000
total flight cy-
cles.
Remove the STA 908 up-
per butt strap and do a
detailed inspection of the
skin, skin doubler and
lower butt strap for corro-
sion in accordance with
Paragraph 3.B., Work In-
structions Part 4.
STA 908 upper butt strap
confirmed to be made of
7000 series aluminum. (c)
AND
Do an open hole HFEC
inspection of the removed
STA 908 upper butt strap
for cracks in accordance
with Paragraph 3.B.,
Work Instructions Part 5.
AND
Do an open hole HFEC
inspection of the skin,
skin doubler, lower butt
strap and stringer splices
for cracks in accordance
with Paragraph 3.B.,
Work Instructions Part 6.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the re-
moved STA 908 upper butt
strap.
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any corrosion found in the
skin, skin doubler or lower
butt strap.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
24 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 25

Group 2, Configuration 2:
Table 4: STA 908 Upper Butt Strap - Test for Part Material
Repeat Interval
(Not to Exceed)
Compliance Time (Whichever
Occurs Later)
ActionCondition
-Before further flight.Contact Boeing for repair
instructions and do the
work instructed by Boe-
ing.
Any crack found in the skin,
skin doubler or lower butt
strap.
-Before further flight.Install a new stringer
splice in accordance with
Paragraph 3.B., Work In-
structions Part 6.
Any crack found in a
stringer splice.
-Before further flight.Install a new STA 908
upper butt strap in accor-
dance with Paragraph
3.B., Work Instructions
Part 6.
No cracking found in the
skin, skin doubler and low-
er butt strap and no crack-
ing found in the STA 908
upper butt strap.
(b)
(a) Confirmation of 2000 series aluminum material in accordance with Paragraph 3.B., Work Instructions
Part 3 terminates the inspections given in this service bulletin.
(b) Replacement of the STA 908 upper butt strap in accordance with Paragraph 3.B., Work Instructions Part
4, Part 5 and Part 6 terminates the inspections given in this service bulletin.
(c) Confirmation of 7000 series aluminum material in accordance with Paragraph 3.B., Work Instructions
Part 3.
F. Approval
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on
the airplane in its original Boeing delivery configuration or as modified by other approved Boeing
changes.
If an airplane has a non-Boeing modification or repair that affects a component or system also affected
by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval
before incorporating this service bulletin.
G. Manpower
The table below shows an estimate of the task hours necessary to do this inspection and replacement
for each airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate
with operator task hour data if necessary. The estimate does not include lost time. These are some
examples of lost time:
 Time to adjust to the workplace
 Time to schedule the work
 Time to inspect the work
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
25 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 26

 Time to cure the materials
 Time to make the parts
 Time to find the tools.
Group 2, Configuration 1; Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
9.7578.008Open Access
0.500.501FIGURE 1
2.002.001FIGURE 2
2.002.001FIGURE 3
1.501.501FIGURE 4
6.0024.004Support Airplane
4.5018.004FIGURE 5
0.750.751FIGURE 6
1.001.001FIGURE 7
6.0012.002HFEC Hole Inspec-
tion
8.7535.004FIGURE 8
10.2582.008Close Access
53.00256.75TOTAL FOR EACH AIRPLANE
Group 2, Configuration 2:
Elapsed HoursTask HoursNumber of PersonsTask
9.7578.008Open Access
0.500.501FIGURE 1
2.002.001FIGURE 2
2.002.001FIGURE 3
1.501.501FIGURE 4
6.0024.004Support Airplane
4.5018.004FIGURE 5
0.750.751FIGURE 6
1.001.001FIGURE 7
6.0012.002HFEC Hole Inspec-
tion
8.7535.004FIGURE 9
10.2582.008Close Access
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
26 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 27

Group 2, Configuration 2:
Elapsed HoursTask HoursNumber of PersonsTask
53.00256.75TOTAL FOR EACH AIRPLANE
H. Weight and Balance Changes
None.
I. Electrical Load Data
Not applicable.
J. References
1. Existing Data
a. Boeing Service Bulletin 737-53-1076, 737-53A1177, 737-53A1262
b. Boeing Service Related Problem (SRP) 737-SRP-53-0340
c. Standard Overhaul Practices Manual (SOPM) SOPM 20-30-03, 20-41-02, 20-43-03, 20-50-10,
20-50-19
d. 737 Non-Destructive Testing (NDT) Manual Part 6, 51-00-00, Part 6, 51-00-26
e. 737-100/200 Aircraft Maintenance Manual (AMM) 21-23-41, 21-23-42, 25-21-341, 25-21-361,
25-21-71, 25-21-91, 25-21-92, 25-23-11, 25-24-101, 25-24-131, 25-24-132, 25-24-141,
25-24-21, 25-24-31, 25-28-0, 25-28-11, 25-28-12, 25-31-10, 25-31-20, 25-31-61
f. 737-100/200 Structural Repair Manual (SRM) 51-10-1, 51-30-02, 51-30-05, 51-50-01
g. BAC5300
h. FAA Airworthiness Directive (AD) 92-25-09, AD 2002-07-08, AD 2002-07-10, AD 2003-08-15,
AD 2010-05-13
2. Data supplied with this Service Bulletin
None.
3. Installation Drawings Used in the Preparation of this Service Bulletin
TitleDrawing Number
SKIN PANEL INSTL-S-10L TO S-10R, STA 727 TO STA 101665-45772
FRAME INSTALLATION-BODY STATION 90765-46558
These drawings were used to prepare this service bulletin. These drawings are not necessary to
make the specified changes, and are not supplied with this service bulletin. These drawings may
not be applicable to all airplane configurations or operators.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
27 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 28

K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue
Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the
Maintenance Program. This service bulletin does not affect FCS, therefore DTIs are not necessary.
L. Interchangeability and Intermixability of Parts
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
28 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 29

2.    MATERIAL INFORMATION
A. Material - Price and Availability
The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each
Airplane . As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin
does not show the Boeing price and supply data.
B. Industry Support Information
Boeing warranty remedies are available for 737 airplanes in warranty as of December 04, 2008. For
inspection task hour reimbursement for airplanes in warranty as of that date, send a warranty claim to
Boeing Commercial Airplanes Group - Warranties. If the condition described in this service bulletin is
found during the inspection for airplanes in warranty as of that date and additional task hours and kits,
parts, and/or special tools are required, send a warranty claim to Boeing Commercial Airplanes Group
- Warranties. Please refer to this service bulletin number and reference the airplane variable numbers
in your purchase order.
C. Parts Necessary For Each Airplane
1. Kits/Parts
None.
2. Parts and Materials Supplied by the Operator
NotesNameQTYPart Number /
Specification
(a)Rivet80BACR15BB5D4C
(a)Rivet10BACR15BB6D5C
(a)Rivet10BACR15BB6D6C
(a) For Insurance CutRivet8BACR15BB8AD7C
(a) OversizeRivet20BACR15GF7D6
(a) OversizeRivet10BACR15GF7D7
(a)Rivet168BACR15GF6D5
(a)Rivet100BACR15GF6D6
(a)Rivet8BACR15GF6D7
Shim5BACS40R009B019
Stringer S-1, S-2, S-3Stringer Splice565-51698-1
(b)Upper Butt Strap165-46880-1
(c)Primer16ozBMS 10-11, TYPE
I
(d)Chemical Conversion Coating8ozTYPE 2, CLASS A
(a) Refer to 737 Structural Repair Manual Chapter 51 for alternate fasteners.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
29 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 30

NotesNameQTYPart Number /
Specification
(b) As an option the upper butt strap can be made. Make from 2024-T3 clad sheet 0.050 x
50.00 x 4.10 inches in accordance with FIGURE 7 .
(c) Refer to the Qualified Products List at the end of the Boeing Material Specification (BMS)
for supplier data.
(d) Refer to SOPM 20-43-03 for material sources.
3. Parts Modified and Reidentified
None.
4. Parts Removed and Not Replaced
None.
D. Parts Necessary to Change Spares
None.
E. Special Tooling - Price and Availability
None.
F. Special Tooling Necessary to do this Service Bulletin
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine
operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
30 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 31

3.    ACCOMPLISHMENT INSTRUCTIONS
A. GENERAL INFORMATION
CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.
NOTE: 1. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for
definition of the acronyms.
2. Obey all of the warnings and cautions given in the specified manual sections.
3. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus
or minus 0.03 inch
– Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch
– Angular tolerance is plus or minus 2 degrees
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair
Manual (SRM) Chapter 51
– Torque limits to tighten nuts and bolts are in SRM Chapter 51
4. Use the approved fastener and process material substitutions in accordance with
SRM Chapter 51. Alternate fasteners are listed in SRM Chapter 51.
5. If the length of any fastener specified in this service bulletin does not meet installation
standards given in SRM Chapter 51, then a fastener of the same specification, or
an approved substitute, with a length which meets the installation standards given
in SRM Chapter 51 may be used. In addition, washers may be installed for fastener
grip length in accordance with SRM Chapter 51.
6. A Detailed Inspection is defined as: An intensive examination of a specific item,
installation, or assembly to detect damage, failure, or irregularity. Available lighting
is normally supplemented with a direct source of good lighting at an intensity deemed
appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be
necessary. Surface cleaning and elaborate procedures may be required.
7. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative
procedure, the accepted alternative procedure can be used. When the words "in
accordance with" are included in the instruction, the procedure in the Boeing document
must be used.
8. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design
Guidelines, is an acceptable procedure to request information from Boeing for
additional structural repair instructions. The Service Letter describes what information
must be provided to Boeing before a structural repair can be provided.
9. Refer to Appendix A for the chemical spot test procedure.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
31 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 32

10. If it is necessary to remove more parts for access, you can remove those parts. If
you can get access without removing identified parts, it is not necessary to remove
all of the identified parts. Jacking and shoring limitations must be observed.
11. Where the work instructions include installation of a kept part, a new or serviceable
part with the same part number can be installed as an alternative to the kept part.
The removed part can be discarded if a new or serviceable part is installed.
12. A lap joint modification as identified in this service bulletin is also referred to as lap
joint cut-out repair in SB 737-53A1177. The modification removes the entire production
lap joint from butt joint to butt joint and installs a doubler and tripler.
13. Clean all faying surfaces on all parts before installation. Refer to SOPM 20-30-03 as
an accepted procedure.
14. Use caution not to damage the holes when removing fasteners from the structure.
15. Every effort has been made to account for all possible unique production
configurations. However, if the fastener patterns, types, and sizes, or the structure
does not agree with the modification instructions, contact Boeing with the details
before proceeding.
16. For locations where retained structure finish is removed, re-finish the bare aluminum
as follows:
– Apply 1 coat of chemical conversion coating Type 2, Class A. Refer to SOPM
20-43-03 as an accepted procedure.
– Apply 2 coats of BMS 10-11, Type I primer. Refer to SOPM 20-41-02 as an
accepted procedure.
17. With the STA 908 upper butt strap removed, do not remove any major components
affecting weight and balance such as the vertical stabilizer, auxiliary power unit
(APU), nose landing gear or main landing gear until the new STA 908 butt strap is
installed.
18. When instructed to contact Boeing for repair instructions and the upper butt strap is
made from 7000 series aluminum or cracked, the repair instructions will include
replacement of the strap.
B. WORK INSTRUCTIONS
1. Group 2-3:
PART 1 - ACCESS
a. Access for Upper Butt Strap Chemical Spot Test or Upper Butt Strap Internal Low Frequency
Eddy Current (LFEC) Inspection:
(1) Remove the following equipment as necessary to get internal access at Station (STA)
908 between Stringer (S)-3L to S-4L and S-3R to S-4R. Refer to the applicable AMM
section in the table below as an accepted procedure:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
32 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 33

NOTE: The chemical spot test only requires access on one side of the airplane. The
chemical spot test can be done anywhere along the length of the strap as long
as it meets area requirement of FIGURE 4.
737-200 AMM SUBJECTEQUIPMENT
737-100/200 AMM 25-21-91 or 737-100/200 AMM 25-
21-92 or 737-100/200 AMM 25-21-361
Aft Lowered Ceiling Panel
737-100/200 AMM 25-21-341Curved Ceiling Panel
737-100/200 AMM 25-21-71Ceiling Insulation
b. Access for Upper Butt Strap Replacement:
(1) Remove the following equipment as necessary to get internal access at STA 908 between
S-4L to S-4R. Refer to the applicable AMM section in the table below as an accepted
procedure:
737-200 AMM SUBJECTEQUIPMENT
737-100/200 AMM 25-21-91 or 737-100/200 AMM 25-
21-92 or 737-100/200 AMM 25-21-361
Aft Lowered Ceiling Panel
737-100/200 AMM 25-21-341Curved Ceiling Panel
737-100/200 AMM 25-21-71Ceiling Insulation
737-100/200 AMM 25-28-0Hatrack
737-100/200 AMM 25-28-11Hatrack Closure Panel
737-100/200 AMM 25-28-12Hatrack Folding Closure Panel
737-100/200 AMM 25-23-11Passenger Service Unit
737-100/200 AMM 25-24-21Aft Left Closet
737-100/200 AMM 25-24-31Aft Right Closet
737-100/200 AMM 25-24-101Carry on Baggage Compartment
737-100/200 AMM 25-24-131 or 737-100/200 AMM
25-24-132
Aft Left Windscreen
737-100/200 AMM 25-24-141Aft Right Windscreen
737-100/200 AMM 21-23-41 or 737-100/200 AMM 21-
23-42
Aft Overhead Distribution Duct
737-100/200 AMM 25-31-10Galley No.3
737-100/200 AMM 25-31-20Galley No.6
737-100/200 AMM 25-31-61Aft Galley
2. Group 2-3:
PART 2 - INSPECTION
a. Do one of the following inspection options:
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
33 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 34

(1) Inspection Option 1: Do an external detailed inspection of the forward and aft skin at STA
908 for cracks in accordance with FIGURE 1.
NOTE: This inspection option can only be done if there are no external repairs or
doublers covering the production skin in the inspection area.
(a) If any skin crack is found, contact Boeing for repair information and do the work
instructed by Boeing.
NOTE: A skin crack indicates possible STA 908 upper butt strap damage.
(2) Inspection Option 2: Do an external LFEC inspection of the STA 908 upper butt strap for
cracks in accordance with FIGURE 2.
NOTE: This inspection option can only be done if the LFEC probe can make contact
with the production skin in the inspection area.
(a) Group 2, Configuration 1; Group 3:
If any STA 908 upper butt strap crack is found, do Part 4 - STA 908 Upper Butt Strap
Removal and Part 6 - STA 908 Upper Butt Strap Installation.
NOTE: If any crack is found in the STA 908 upper butt strap then Part 6 provides
instructions for an insurance cut to remove potential skin cracks by
oversizing fastener holes at the strap upper splice row.
(b) Group 2, Configuration 2:
If any STA 908 upper butt strap crack is found, contact Boeing for repair instructions
and do the work instructed by Boeing.
NOTE: Do not enlarge any fastener holes beyond the starting hole size tolerance
before contacting Boeing. An insurance cut to remove potential skin cracks
by oversizing fastener holes may be required and instructions will be
provided.
(3) Inspection Option 3: Do an internal LFEC inspection of the STA 908 upper butt strap for
cracks in accordance with FIGURE 3.
NOTE: This inspection option can only be done if the LFEC probe can make contact
with the lower butt strap in the inspection area.
(a) Group 2, Configuration 1; Group 3:
If any STA 908 upper butt strap crack is found, do Part 4 - STA 908 Upper Butt Strap
Removal and Part 6 - STA 908 Upper Butt Strap Installation.
NOTE: If any crack is found in the STA 908 upper butt strap then Part 6 provides
instructions for an insurance cut to remove potential skin cracks by
oversizing fastener holes at the strap upper splice row.
(b) Group 2, Configuration 2:
If any STA 908 upper butt strap crack is found, contact Boeing for repair instructions
and do the work instructed by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
34 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 35

NOTE: Do not enlarge any fastener holes beyond the starting hole size tolerance
before contacting Boeing. An insurance cut to remove potential skin cracks
by oversizing fastener holes may be required and instructions will be
provided.
3. Group 2-3:
PART 3 - UPPER BUTT STRAP CHEMICAL SPOT TEST
a. Do a chemical spot test of the STA 908 upper butt strap to confirm the part material in
accordance with FIGURE 4.
(1) If the upper butt strap is found to be made from 7000 series aluminum, do Part 4 - STA
908 Upper Butt Strap Removal and Part 5 - STA 908 Upper Butt Strap Inspection at the
time given in Paragraph 1.E., Compliance.
NOTE: If the upper butt strap is found to be made from 7000 series aluminum it must
be replaced in accordance with Part 4 - STA 908 Upper Butt Strap Removal,
Part 5 - STA 908 Upper Butt Strap Inspection, and Part 6 - STA 908 Upper Butt
Strap Installation at the time given in Paragraph 1.E., Compliance.
(2) If the upper butt strap is found to be made from 2000 series aluminum, no further action
as provided by this service bulletin is necessary.
4. Group 2-3:
PART 4 - STA 908 UPPER BUTT STRAP REMOVAL
NOTE: If a doubler type skin repair is installed common to the STA 908 upper butt strap, contact
Boeing for repair instructions and do the work instructed by Boeing.
NOTE: If any hex drive fasteners (lock bolts or hi-locks) are found in the STA 908 upper butt
strap replacement area, contact Boeing for repair instructions and do the work instructed
by Boeing.
a. Support the Airplane in Jig position in accordance with 737-100/200 SRM 51-50-01. Make
sure the fuselage is in jig position. Alignment checks of the fuselage are required. Alignment
checks of the wing are not required. Fuselage support jigs are required. Wing and horizontal
stabilizer support jigs are not required.
b. Remove the STA 908 upper butt strap and do a detailed inspection of the skin, skin doubler
and lower butt strap visible surfaces for corrosion in accordance with FIGURE 5.
NOTE: Carefully remove fasteners common to the skins to preserve fastener hole size.
(1) If any corrosion is found, contact Boeing for repair instructions and do the work instructed
by Boeing.
5. Group 2-3:
PART 5 - STA 908 UPPER BUTT STRAP INSPECTION
a. Do an open hole High Frequency Eddy Current (HFEC) inspection of the removed STA 908
upper butt strap for cracks in accordance with FIGURE 6.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
35 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 36

(1) Group 2, Configuration 1; Group 3:
If any crack is found, do Part 6 - STA 908 Upper Butt Strap Installation.
NOTE: If any crack is found in the STA 908 upper butt strap then Part 6 provides
instructions for an insurance cut to remove potential skin cracks by oversizing
fastener holes at the strap upper splice row.
(2) Group 2, Configuration 2:
If any crack is found, contact Boeing for repair instructions and do the work instructed by
Boeing.
NOTE: Do not enlarge any fastener holes beyond the starting hole size tolerance before
contacting Boeing. An insurance cut to remove potential skin cracks by oversizing
fastener holes may be required and instructions will be provided.
(3) If no cracking is found in the STA 908 upper butt strap, do Part 6 - STA 908 Upper Butt
Strap Installation.
NOTE: Boeing requests that operators send STA 908 upper butt straps that are cracked or
identified as 7000 series material to Boeing.
SEND TO: BOEING COMMERCIAL AIRPLANE GROUP
ATTENTION: MANAGER, AIRLINE SUPPORT
6. Group 2-3:
PART 6 - STA 908 UPPER BUTT STRAP INSTALLATION
NOTE: If a doubler type skin repair is installed common to the STA 908 upper butt strap, contact
Boeing for repair instructions and do the work instructed by Boeing.
NOTE: If any hex drive fasteners (lock bolts or hi-locks) are found in the STA 908 upper butt
strap replacement area, contact Boeing for repair instructions and do the work instructed
by Boeing.
NOTE: The STA 908 upper butt strap replacement has no effect on SSI F-38E inspections.
a. Make a new STA 908 upper butt strap in accordance with FIGURE 7, if required.
b. Do a HFEC open hole inspection of all accessed holes in the skins, skin doublers, lower butt
strap and stringer splices for cracks in accordance with 737 NDT Part 6, 51-00-00, Figure 16,
0.03 notch standard.
NOTE: Make sure the fastener hole is round before inspection. If necessary, it is acceptable
to do the clean up ream in accordance with 737 NDT Part 6, 51-00-00, Figure 16.
This shall be a light ream to clean the hole without increasing the diameter of the
hole beyond the starting hole size tolerance.
(1) If any crack is found in the skin, skin doubler or lower butt strap, contact Boeing for repair
instructions and do the work instructed by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
36 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 37

NOTE: Do not enlarge any fastener holes beyond the starting hole size tolerance before
contacting Boeing. An insurance cut to remove potential skin and lower butt
strap cracks by oversizing fastener holes may be required and instructions will
be provided.
(2) If any crack is found in the S-1, S-2 or S-3 stringer splices, replace the stringer splice
with a new production part using production specified fasteners, except for fasteners
common to the STA 908 upper butt strap, use fasteners as specified in this service bulletin.
NOTE: Boeing requests that operators provide them with crack length, crack location
and aircraft cycles at the time of finding.
NOTE: For cracked stringer splices, replacement new stringer splices are installed
during the new STA 908 upper butt strap installation.
c. Group 2, Configuration 1; Group 3:
Do one of the following as applicable:
(1) For a STA 908 upper butt strap found crack free by Part 5 inspection and the skins, skin
doublers and lower butt straps are found crack free by Part 6 inspections, install the new
STA 908 upper butt strap and replacement stringer splices in accordance with FIGURE
8.
(2) For a STA 908 upper butt strap found cracked by Part 2 or Part 5 inspections, and the
skins, skin doublers and lower straps are found crack free by Part 6 inspection, install
the new STA 908 upper butt strap and replacement stringer splices in accordance with
FIGURE 8. At the upper row of the strap splice common to the butt strap crack location,
do an insurance cut by oversizing the fastener holes in accordance with FIGURE 8.
NOTE: The insurance cut is accomplished by oversizing the crack free specified holes
to make sure no small cracks exist in the skins, skin doublers or lower straps
when the upper butt strap was found to be cracked.
d. Group 2, Configuration 2:
For a STA 908 upper butt strap found crack free and skin, skin doubler and lower butt strap
are found crack free, install the new STA 908 upper butt strap and stringer splices in
accordance with FIGURE 9.
7. Group 2-3:
PART 7 - CLOSE ACCESS
a. Install the following equipment if it was removed for internal access. Refer to the applicable
AMM reference below as an accepted procedure.
737-200 AMM SUBJECTEQUIPMENT
737-100/200 AMM 25-21-91 or 737-100/200 AMM 25-
21-92 or 737-100/200 AMM 25-21-361
Aft Lowered Ceiling Panel
737-100/200 AMM 25-21-341Curved Ceiling Panel
737-100/200 AMM 25-21-71Ceiling Insulation
737-100/200 AMM 25-28-0Hatrack
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
37 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 38

737-200 AMM SUBJECTEQUIPMENT
737-100/200 AMM 25-28-11Hatrack Closure Panel
737-100/200 AMM 25-28-12Hatrack Folding Closure Panel
737-100/200 AMM 25-23-11Passenger Service Unit
737-100/200 AMM 25-24-21Aft Left Closet
737-100/200 AMM 25-24-31Aft Right Closet
737-100/200 AMM 25-24-101Carry on Baggage Compartment
737-100/200 AMM 25-24-131 or 737-100/200 AMM
25-24-132
Aft Left Windscreen
737-100/200 AMM 25-24-141Aft Right Windscreen
737-100/200 AMM 21-23-41 or 737-100/200 AMM 21-
23-42
Aft Overhead Distribution Duct
737-100/200 AMM 25-31-10Galley No.3
737-100/200 AMM 25-31-20Galley No.6
737-100/200 AMM 25-31-61Aft Galley
b. Put the airplane back to a serviceable condition.
8. Group 1:
On Group 1 airplanes, contact Boeing to get instructions for the inspection, and/or repair for this
service bulletin, 737-53-1313, and do the work instructed by Boeing.
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
38 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 39 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
STA  END OF LOWER
908  BUTT STRAP
STA  727  STA  908  SKIN  UPPER AFT
S-4R'  0000000000
S-4L
- S-3L
UPPER FWD
SKIN  UPPER BUTT
STRAP
UPPER
DOUBLER
END OF LOWER
DOUBLER
END OF
UPPER BUTT
STRAP
• TAPERED
FILLER
S-4L
LOWER
DOUBLER
LOWER FWD  LOWER AFT
SKIN  SKIN
LOWER BUTT
INSPECTION  STRAP
4 AREA
EXTERNAL VIEW
FIGURE 1: STA 908 SKIN - INSPECTION OPTION 1 - EXTERNAL DETAILED INSPECTION
(SHEET 1 OF 3)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  39 of 83

### Page 40 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
END OF LOWER
BUTT STRAP
UPPER AFT  STA
SKIN  908
S-3R -  + +
UPPER FWD
UPPER BUTT  SKIN
STRAP
→ UPPER
DOUBLER
• END OF LOWER
DOUBLER
END OF
UPPER BUTT
STRAP
TAPERED
FILLER
S-4R
LOWER
- DOUBLER
LOWER AFT  LOWER FWD
SKIN  SKIN
LOWER BUTT
STRAP
B
INSPECTION  EXTERNAL VIEW  2041215
AREA
FIGURE 1: STA 908 SKIN - INSPECTION OPTION 1 - EXTERNAL DETAILED INSPECTION
(SHEET 2 OF 3)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  40 of 83

### Page 41

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)--SkinInspect1
(a) (b)--SkinInspect2
(a) Do a detailed inspection of the forward and aft skin at STA 908 for cracks.
(b) Typical cracks are in the longitudinal direction, starting at the fastener hole.
FIGURE 1: STA 908 SKIN - INSPECTION OPTION 1 - EXTERNAL DETAILED INSPECTION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
41 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 42 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
STA  END OF LOWER
908  BUTT STRAP
STA  STA  UPPER AFT
727  908  SKIN
S-4R*  0000000000
S-4L
- S-3L
UPPER FWD
SKIN  UPPER BUTT
STRAP
UPPER
DOUBLER
END OF LOWER
DOUBLER
END OF
UPPER BUTT
STRAP
TAPERED
FILLER
S-4L
LOWER
DOUBLER
LOWER FWD  LOWER AFT
SKIN  SKIN
FWD  LOWER BUTT  2041223
INSPECTION  STRAP
AREA
EXTERNAL VIEW
FIGURE 2: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 2 - EXTERNAL LFEC INSPECTION
(SHEET 1 OF 3)
Original Issue: November 03, 2011
737-53-1313
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  42 of 83

### Page 43 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
END OF LOWER
BUTT STRAP
UPPER AFT  SKIN  908  STA
S-3R -  +++
UPPER FWD
UPPER BUTT  SKIN
STRAP
UPPER
DOUBLER
END OF LOWER
DOUBLER
END OF
UPPER BUTT
STRAP
TAPERED
FILLER
S-4R
LOWER
- DOUBLER
LOWER AFT  LOWER FWD
SKIN  SKIN
LOWER BUTT  FWD
STRAP
AREA  INSPECTION  EXTERNAL VIEW
FIGURE 2: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 2 - EXTERNAL LFEC INSPECTION
(SHEET 2 OF 3)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  43 of 83

### Page 44

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b) (c)165-46880-1Upper Butt StrapInspect1
(a) (b) (c)165-46880-1Upper Butt StrapInspect2
(a) Do an external Low Frequency Eddy Current (LFEC) inspection of the upper butt strap for cracks in ac-
cordance with 737 NDT Part 6, 51-00-26.
(b) Typical cracks are in a longitudinal direction, starting at the fastener hole.
(c) The upper skin thickness is 0.036 inches, the upper doubler thickness is 0.036 inches for a total thickness
of 0.072 inches.
FIGURE 2: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 2 - EXTERNAL LFEC INSPECTION
(SHEET 3 OF 3)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
44 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 45 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
STA
908
STA
727
S-4R'  0000000000
[ S-4L
UPPER BUTT
STRAP
UPPER FWD
SKIN ASSEMBLY  STA
908
S-3L.
UPPER AFT
SKIN ASSEMBLY
LOWER
BUTT STRAP
INTERNAL VIEW
INSPECTION  (FRAME NOT SHOWN FOR CLARITY)  2041231
• AREA
FIGURE 3: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 3 - INTERNAL LFEC INSPECTION
(SHEET 1 OF 2)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  45 of 83

### Page 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b) (c)165-46880-1Upper Butt StrapInspect1
(a) (b) (c)165-46880-1Upper Butt StrapInspect2
(a) Do an internal Low Frequency Eddy Current (LFEC) inspection of the upper butt strap for cracks in accor-
dance with 737 NDT Part 6, 51-00-26.
(b) Typical cracks are in a longitudinal direction, starting at the fastener hole.
(c) The lower butt strap thickness is 0.050 inches.
FIGURE 3: STA 908 UPPER BUTT STRAP - INSPECTION OPTION 3 - INTERNAL LFEC INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
46 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 47 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
STA
908
STA
727
S-4R-  0000000000
I S-4L
UPPER BUTT
STRAP
UPPER FWD
SKIN ASSEMBLY  STA
908
S-3L.
UPPER AFT
SKIN ASSEMBLY
LOWER
BUTT STRAP
1 TYPICAL INSPECTIO
→ LOCATIO
INTERNAL VIEW
CHEMICAL SPOT TEST  (FRAME NOT SHOWN FOR CLARITY)  2041429
AREA
FIGURE 4: STA 908 UPPER BUTT STRAP - CHEMICAL SPOT TEST
(SHEET 1 OF 2)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  47 of 83

### Page 48

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b) (c)165-46880-1Upper Butt StrapInspect1
(a) Do a chemical spot test of the upper butt strap to identify the part material. Refer to APPENDIX A as an
accepted procedure.
(b) The inspection area should be 0.50 - 0.70 inch diameter and located between the inner fastener rows.
The inspection area can be chosen at any point along the length of the upper butt strap where direct access
to the strap can be achieved.
(c) The typical inspection location shown can be located anywhere along the STA 908 upper butt strap where
note (b) can be met.
FIGURE 4: STA 908 UPPER BUTT STRAP - CHEMICAL SPOT TEST
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
48 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 49 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
STA
908
• S-4R
STA
908
STA
727
S-4R  00000000  • S-3R
S-4L
- S-2R
B  - S-1
- S-2L
→ S-3L
- S-4L
FWD
A-A  2041435
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 1 OF 7)
Original Issue: November 03, 2011
BOEING PROPRIETARY .  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  49 of 83

### Page 50 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
FWD LOWER  STA
SKIN  908  AFT LOWER
BUTT JOINT  SKIN
- S-4R
12 LOCATIONS  TAPERED
4  • FILLER
END OF UPPER
BUTT STRAP
24 LOCATIONS
FWD UPPER
SKIN
END OF LOWER
BUTT STRAP
- S-3R
6 LOCATIONS
6 LOCATIONS
36 LOCATIONS
'AFT UPPER
SKIN
İL÷7  - S-2R
REFERENCE  UPPER BUTT 5  STRAP  FWD  2042659
FASTENER  EXTERNAL VIEW
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 2 OF 7)
Original Issue: November 03, 2011
737-53-1313
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  50 of 83

### Page 51 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
STA
6 LOCATIONS  908  UPPER BUTT
BUTT JOINT  STRAP
C I  † C
• S-2R
36 LOCATIONS
6 LOCATIONS
6 LOCATIONS
• AFT UPPER
SKIN
6 LOCATIONS
B
FWD UPPER
SKIN
FWD
REFERENCE
FASTENER  EXTERNAL VIEW
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 3 OF 7)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  51 of 83

### Page 52 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
SIA
908
BUTT JOINT  UPPER BUTT
STRAP
- S-2L
FWD UPPER  AFT UPPER
SKIN  SKIN
36 LOCATIONS
6 LOCATIONS  6 LOCATIONS
- S-3L  C
END OF LOWER
• BUTT STRAP
24 LOCATIONS
~ END OF UPPER
12 LOCATIONS  BUTT STRAP
~ TAPERED
FILLER
- S-4L
==
AFT LOWER
SKIN
FWD LOWER
SKIN
REFERENCE  FWD
FASTENER  EXTERNAL VIEW
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 4 OF 7)
Original Issue: November 03, 2011
737-53-1313
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  52 of 83

### Page 53 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
STA STA
907  908
STRINGER  STRINGER
CLIP  SPLICE
1) RATE  FILLE
D→
SKIN  SKIN
DOUBLER  SHIM  UPPER
B-B  BUTT
STRAP
UPPER
BUTT
SHIM  STRAP
SKIN
DOUBLER  SKIN
1 FILLEF  RADIUS
STRINGER  STRINGER
FWD  CLIP  SPLICE
STA STA
907  908
C-C  2042676
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 5 OF 7)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  53 of 83

### Page 54

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Attaching stringer
clips to the frame
and stringers at S-1,
S-2L, S-2R, S-3L,
and S-3R.
30-FastenersRemove1
(a)569-35352-( )Stringer ClipRemove / Keep
if installed.5BACF33C102-200Radius FillerRemove / Keep
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 6 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
54 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 55

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
Common to Skin
and common to
stringers at S-1, S-
2L, S-2R, S-3L, and
S-3R.
120-FastenersRemove2
565-51698-1Stringer SpliceRemove / Keep
Between the stringer
splices and upper
butt strap.
5-ShimRemove
192-FastenersRemove3
(b) Common to the
tapered fillers, left
and right side.
24-FastenersRemove4
(c) (f)165-46880-1Upper Butt StrapRemove5
CAUTION: WHEN REMOVING SEALANT, USE ONLY APPROVED SCRAPERS AND SOLVENTS. DO
NOT USE KNIVES OR UNAPPROVED SCRAPERS. REFER TO SERVICE BULLETIN 737-
53A1262 REVISION 3, APPENDIX A.
(d)--SealantRemove6
Upper skins, forward
and aft. (e)
--SkinsInspect7
Upper skin doublers,
forward and aft. (e)
--Skin DoublersInspect
(e)--Lower Butt StrapsInspect
(a) When the stringer clip is removed from the frame, remove the clip carefully so it can be re-installed. A
removed clip must be re-installed only in its original location. Make sure the STA 908 upper butt strap inner
surface to frame outer chord distance can be maintained during re-installation. Measure and record these
distances at each location a stringer clip will be removed. This measurement can be used if a stringer
clip is damaged during removal.
(b) Removal of these fasteners is optional if additional access is required to remove the upper butt strap.
(c) Check removed strap edge margin to make sure a new replacement strap can meet edge margin replace-
ment requirements.
(d) Clean off old sealant from the skin doubler and retained butt straps at the location common to the removed
STA 908 upper butt strap.
(e) Do an internal and external detailed inspection of the skins, skin doublers and lower butt strap visible
surfaces for corrosion.
(f) As an option, the existing strap may be used to establish the length of the new replacement strap. Measure
and record the distance from each end of the stap to the stringer 4 centerline for both left and right sides.
This dimension is to be 4.30 inches for both left and right ends for the new replacement strap.
FIGURE 5: STA 908 UPPER BUTT STRAP - REMOVAL
(SHEET 7 OF 7)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
55 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 56 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
FASTENER HOLE  — REFERENCE
INSPECTION  FASTENER  2058118
FIGURE 6: STA 908 UPPER BUTT STRAP - OPEN HOLE HFEC INSPECTION
(SHEET 1 OF 2)
Original Issue: November 03, 2011
737-53-1313
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.  56 of 83

### Page 57

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b)165-46880-1Upper Butt StrapInspect1
(a) Make sure the fastener hole is round before inspection. If necessary, it is acceptable to do the clean up
ream in accordance with 737 NDT Part 6, 51-00-00, Figure 16. This shall be a light ream to clean the hole
without increasing the diameter of the hole beyond the starting hole size tolerance.
(b) Do an open hole High Frequency Eddy Current (HFEC) inspection of the upper butt strap for cracks at
the eight indicated fastener holes in accordance with 737 NDT Part 6, 51-00-00, Figure 16, 0.03 notch
standard.
FIGURE 6: STA 908 UPPER BUTT STRAP - OPEN HOLE HFEC INSPECTION
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
57 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 58 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2-3.
4.10→  - 0.40R
(TYPICAL)
- S-4R (REF)
4.30
B→
LOWER BUTT
STRAP (REF)
UPPER BUTT
STRAP
- GRAIN DIRECTION
- S-3R (REF)
1E3A
50.00  B-B
-- S-3L (REF)
• UPPER BUTT
STRAP
LOWER BUTT
STRAP (REF)
0.25 CHAMFER
(OPTIONAL)  4.30
(TYPICAL)
- S-4L (REF)
0.25 CHAMFER
OPTIONAL)
(TYPICAL)  A-A  2043128
FIGURE 7: STA 908 UPPER BUTT STRAP - MAKE
(SHEET 1 OF 2)
Original Issue: November 03, 2011
BOEING PROPRIETARY -  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  58 of 83

### Page 59

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY
numbers shown below are the number of parts necessary for this figure.
MORE DATAQTYIDENTIFICATIONNAMETASKSTEP
(a) (b) (f) (g) (h) (i) (j)
(k)
165-46880-1Upper Butt StrapMake1
(c)-TYPE 2, CLASS AChemical Conversion
Coating
Apply2
(d) 2 layers.-BMS 10-11, TYPE 1PrimerApply3
(e)165-46880-1Part MarkApply4
(a) Make from 2024-T3 clad sheet per QQ-A-362, 0.050 inch thickness. Substitution for other material not
allowed.
(b) Break sharp edges and remove burrs.
(c) Refer to SOPM 20-43-03 as an accepted procedure.
(d) Refer to SOPM 20-41-02 as an accepted procedure.
(e) Identify the new upper butt strap with the part mark by rubber stamping. Refer to SOPM 20-50-10 as an
accepted procedure.
(f) Maintain a 125 microinches Ra machine finish, all surfaces.
(g) Form to a 70-72 inch radius per BAC5300.
(h) Stock size - width and length shown. Radius or optional chamfer applied to final sized part.
(i) Final strap width is 3.60 inches. It is acceptable to increase the width up to 3.85 inches maximum to
maintain 2D fastener edge margin at all fasteners common to the strap. A minimum 2.0 inch radius in all
transition areas along the edge profile changes.
(j) Final strap length is determined by trimming the strap, resulting in the left strap end being 4.30 inch from
the S-4 left centerline and the right strap end being 4.30 inch from the S-4 right centerline. The optional
measurements obtained in FIGURE 5 can be used to establish this strap length.
(k) To size the upper butt strap it may be required to temporarily locate the upper butt strap on the airplane
by sliding or rotating forward and aft so the upper butt strap is outboard of the lower butt strap at each
end of the upper butt strap.
FIGURE 7: STA 908 UPPER BUTT STRAP - MAKE
(SHEET 2 OF 2)
BOEING PROPRIETARY -
Copyright © Unpublished Work - See page 1 for details.
Original Issue: November 03, 2011
737-53-1313
59 of 83
BOEING SERVICE BULLETIN 737-53-1313

### Page 60 (OCR)

BOEING SERVICE BULLETIN 737-53-1313
This Figure applies only to: Group 2, Configuration 1; Group 3.
STA
908
- S-4R
STA
908
STA
727
S-4R  0000K  - S-3R
S-4L
000
- S-2R
- S-1
- S-2L
→ S-3L
- S-4L
FWD
A-A
FIGURE 8: STA 908 OPPER BUTT STRAP - REPLACEMENT
(SHEET 1 OF 11)
Original Issue: November 03, 2011
BOEING PROPRIETARY  737-53-1313
Copyright © Unpublished Work - See page 1 for details.  60 of 83

The text continues at https://openairdocs.org/service-documents/boeing/sb-737-53-1313/file/532d630616e8.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
