# Boeing Service Bulletin 747-25-2425: Revision 1

- Rights: © The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2013-0090; AD 2013-19-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Boeing Service Bulletin 747-25-2425](https://openairdocs.org/service-documents/boeing/sb-747-25-2425.md)
- Title as filed: U.S. DOT/FAA - Service Information
- Pages: 23
- PDF: https://openairdocs.org/files/sha256/b4/a1/b4a160844118d9f1eba9d22498d7689807457541bbb866402a5b5635f6ea8af2
- Page: https://openairdocs.org/service-documents/boeing/sb-747-25-2425/file/b4a160844118

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

SEF 1 2 1971  (MASTER COPIES)
REVISION  747
TRANSMITTAL SHEET
Boeing Service Bulletin No. 747-25-2425
This sheet transmits REVISION 1 dated  . September 7, 1979
of Service Bulletin No. 747-25-2425, Slide/Raft Pack Board
Improvements And Pressure Vessel Viewing Provisions.
NOTE:  This revision constitutes a complete reissue.
SUMMARY
This revision is issued to correct Paragraph I.A.1, 'Airplanes
Affectedi, and to add LY to the effectivity.
Airplanes modified per the previous releases of this bulletin
do not require additional work.
A revision bar in the left margin along with this revision
number and date indicates a change. Absence of a revision
bar on a page bearing a "revised" notice means only that
existing copy has been moved or that a minor typographical
error has been corrected.
REVISION HISTORY
Original Issue:  August 25, 1978
Revision 1:  September 7, 1979
BOEING COMMERCIAL
AIRPLANE COMPANY
CUSTOMER SUPPORT

### Page 2 (OCR)

BOEING COMMERCIAL AIRPLANE COMPANY
SUBJECT: SLIDE/RAFT PACKBOARD
IMPROVEMENTS AND PRESSURE
VESSEL VIEWING PROVISIONS
BOEING 747
SERVIOE BULLETII
SUMMARY
P.O. BOX 3707 SEATTLE, WASHINGTON 981%
ATA: 2569  NO: 747-25-2425
DATE: August 25, 1978
REVISION 1: September 7, 19
BACKGROUND  ACTION  (PRR 75524-55 & -56)
One operator has recently reported  Replace packboard cap nuts wit:
finding several slide rafts,  flush type inserts.  Reinforc
one recently delivered airplane,  lower packboard support bracke
small  punctures  attachments",  Install  ne
inflatable  material immediately  packboard  hooks.  Modif
adjacent to the fasteners which  retain the double hook packboard  packboard  main entry door  by  lower liner an  adding "pRESS I  aligne
latch. The small punctures are  viewing port:  Remove
believed to  be the result of the  TEST"  circuit panel  and remov
slide raft  inflatable  material  associated circuitry.
contacting the several exposed cap
nuts on  the inside  the  EFFECTIVITY
packboard  used to install  the
double hook packboard latch.  Line No.  chry 3 airplanes 15  158, 160, 194
198, and 260 thru
In addition, the operator reported  number  272.
several  instances  of  slide/raft  airplanes, and 747F airplanes.
packboard  fitting  inserts
loosening and breaking out of  the  MANPOWER
fiberglass base.
Boeing has also received a report
of one of the hooks on the double
hook latch separating, resulting
in only one hook actually latching
and carrying the load.
Total Manhours - 20
Airplane  Down-Time - 10 Hours Pe
Door
MATERIAL INFORMATION
Numerous  reports  Kit  Price*
indications of low pressure in the
pressure vessel have been received  63B12678-1  No Charge
four  operators.  63B12678-2  No Charge
containing  a remote indicating  63B12678-5  No Charge
switch for operation  of the low  63B12678-6  No Charge
pressure warning  light have been  63B12678-7  No Charge
susceptible to corrosion. A means
for direct viewing of the pressure  *  See  Paragraph  I.F. for term
pressure  and conditions applicable to pric
therefore  been developed in order  and delivery information.
to delete the  warning  light
function.
Summary Page 1 of

### Page 3 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
REMOVE PRESS
TO TEST PANEL.
INSTALL COVER  INSTALL NEW
OVER CUTOUT  PACKBOARD
IN MIDDLE LINER  LATCH HOOKS
REMOVE ASSOCIATED
WIRING
PACKBOARD
• LOWER LINER
MAKE CUTOUT IN PACKBOARD
AND LOWER LINER. INSTALL
COVER DOOR OVER CUTOUT
IN PACKBOARD
ADD NEW BEARING PLATE
ADD NEW
FIBERGLASS
PLUG
EXISTING LOWER
MOUNTING BRACKET
TYPICAL LEFT SIDE DOOR SHOWN
RIGHT SIDE DOOR OPPOSITE
Aug 25/78
Summary Page 2 of 2

### Page 4 (OCR)

BOEING
BOEING COMMERCIAL AIRPLANE COMPANY  P.O. BOX 3707 SEATTLE. WASHINGTON 98124
SERVICE BULLETIN
ATA  NO: 747-25-2425
SYSTEM: 2569  747  DATE:  August 25,  1978
REVISION 1: September  1979
SUBJECT: SLIDE/RAFT PACKBOARD IMPROVEMENTS AND PRESSURE
VESSEL VIEWING PROVISIONS
I.  Planning Information
A.  Effectivity
Airplanes Affected
equivalent change will be incorporated in
production in accordance with PRR 75524-55 and 75524-
applicable airplanes other than those listed
below.
CUSTOMER &  MODEL &
CUSTOMER NO.  SERIES  MFG. SERIAL NO.  REGISTRY NO.
AF (AIR FRANCE)
RA266  747-128  21141  N40116
RD651  747-2288  21326  F--BPVS
RD652  747-228B  21429  F--BPVT
RD653  747-228B  21537  N1252E
AI (AIR INDIA)
RA725  747-2378  21182  VT-EDU
RA726  747-2378  21446  VT-EFJ
RA727  747-2378  21473  VT-EFO
Aug 25/78  747-25-2425
REV. 1: Sep 7/79  Page 1 of 20

### Page 5 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
CUSTOMER &  CUSTOMER NO.  MODEL &  SERIES  MFG. SERIAL NO.  REGISTRY NO.
AR (ARGENTINAS)
RD121  747-2878  21189  LV-LZD
AT (ROYAL AIR MOROC)  RD671  747-2868  21615  CN-RME
BA (BRITISH AIRWAYS )  RD135&RD136  RA318  RD131-RD134  747-136  747-2368  747-2368  21213  21238 THRU 21241  21350 AND 21351  G-BDXA  G-BDPV  G-BDXE  THRU G-BDXD  AND G-BOXF
RD137  747-2368  21536  G-BDXG
CI (CHINA AIRLINES)  RD551  747-2098  21454  B-1864
RG171  747SP-09  21300  B-1862
GN (AIR GABON)
RD661  747-2028  21468  F-ODJG
IA (IRAQI AIRWAYS)  RJ301&RJ302  747-270C  21180 AND 21181  YI-AGN AND YI-AGO
IR (IRAN NATIONAL AIRLINES)  RG101&RG102  RD681 CRD682  747-2868  747SP-86  21217 AND  20998 AND 20999  21218  EP-IAG AND EP-IAH  EP-IAA AND EP-IAS
RG103  7475P-86  21093  EP-IAC
KL (ROYAL DUTCH)  RD 601ERD602  747-2068  21110 AND 21111  PH-BUH AND PH-BUI
RD603  747-2068  21547  PH-BUK
KU (KUWAIT AIRWAYS  RD201&RD202  747-2693  CORP.)  21541 AND 21542 9K-ADA AND 9K-ADB
LH (LUFTHANSA)  RD641&RD642  747-2308  21220 AND  21221  D-ABYJ AND D-ABYK
RD643  747-2308  21380  D-ABYL.
RD644  747-2309  21588  D-ABYM
Aug 25/78  REV. 1: Sep 7/79  747-25-2425  2

### Page 6 (OCR)

BOEING SERVICE BULLETIN NO. 747-25--2425
CUSTOMER &  MODEL &
CUSTOMER NO.  SERIES  MFG. SERIAL NO.  REGISTRY NO.
LY (EL AL ISRAEL)
RJ152  747-2586 21594  4X-AXF
ME (MIDDLE EAST AIRLINES)
RD 621-RD623  747-2048  21097 THRU 21099  OD-AGH THRU OD-AGJ
PA (PAN AMERICAN)
RGU01-RG005  747SP-21  21022 THRU 21026  N530PA THRU N534PA
RG006ERG007  747SP-21  21547 AND 21548  N537PA AND  N538PA
7475P-21  21441  N536PA
QF  (QANTAS)
- RB010  747-238B 21054  VH-EBJ
RBO11  747-2388  21140  VH-EBK
RB 012  747-238B  21237  VH-EBL
RD513&RD514  747-2388  21352  AND  21353  VH-EBM  AND  VH-EBN
RD515&RD516  747-2388  21657  AND  21658  VH-£8O  AND  VH-EBP
RD531  747-238B  21354  VH-ECA
(SYRIAN ARAB AIRLINES)
RG141ERG142  747SP-94  21174 AND  21175  YK-ДНА AND YK-АНВ
RJ (ROYAL JORDANIAN)
RD691&RD692  747-203B  21251 AND  21252  JY-AFA AND  JY-AFB
SA  (SOUTH AFRICAN)
RB 071-RB073  747-244B  20237 THRU  20239  2S-SAL THRU ZS-SAN
RB 074ER8075  747-2448  20556 AND  20557  2S-SAO AND  ZS-SAP
RG121-RG123  7475P-44  21132 THRU 21134  ZS-SPA THRU ZS-SPC
RG124ERG125  7475P-44  21253 AND  21254  ZS-SPD AND  ZS-SPE
RG 126  7475P-44  21263  2S-SPF
SK  (SCANDINAVIAN)
RD591  747-2838  21381  LN-RNA
SQ (SINGAPORE AIRLINES LTD)
RD045  747-2128  21162  9V-SQE
RD046  747-212B  21316  9V-SQF
RD047  747-2128  21439  9V-S0G
Aug 25/18  747-25-2425
REV. 1: Sep 7/79  3

### Page 7 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
CUSTOMER &  MODEL &
CUSTOMER NO.  SERIES  MFG. SERIAL NO.  REGISTRY NO.
SV (SAUDI ARABIAN EXEC)
RH101  7475P-68 21652  HZ-HM1
WD (WARDAIR)
RD171  747-211B 21516  C-GXRA
Aug 25/78  747-25-2425
REV. 1: Sep 7/79

### Page 8 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-24:25
2.  Spares Affected
The following is a composite list of spares affected
by this change. Operators should review their spares
procurement  to establish existence of any listed
parts in their spares inventory. See Paragraph II.D.
Existing Parts Accountability for disposition.
Part Number  Nomenclature
60B50082-10  Slide/Raft Assembly
60B50082-11  Slide/Raft Assembly
60B50082-12  Slide/Raft Assembly
60B50082-13  Slide/Raft Assembly
60B50082-14  Slide/Raft Assembly
60B50082-15  Slide/Raft Assembly
60850082-67  Slide/Raft Assembly
60B50082-68  Slide/Raft Assembly
60B50082-69  Slide/Raft Assembly
60B50082-70  Slide/Raft Assembly
60B50082-71  Slide/Raft Assembly
60B50082-72  Slide/Raft Assembly
60B50082-109  Slide/Raft Assembly
60B50082-110  Slide/Raft Assembly
60B50082-111  Slide/Raft Assembly
60B50082-112  Slide/Raft Assembly
60B50082-113  Slide/Raft Assembly
60B50082-114  Slide/Raft Assembly
60B50082-143  Slide/Raft Assembly
60B50082-144  Slide/Raft Assembly
60B50082-145  Slide/Raft Assembly
60B50082-146  Slide/Raft Assembly
60B50082-147  Slide/Raft Assembly
60B50082-147  Slide/Raft Assembly
60B50082-171  Slide/Raft Assembly
60B50082-172  Slide/Raft Assembly
60B50082-173  Slide/Raft Assembly
60B50082-174  Slide/Raft Assembly
60B50082-175  Slide/Raft Assembly
60B50082-176  Slide/Raft Assembly
60B50082-185  Slide/Raft Assembly
60B50082-186  Slide/Raft Assembly
60B50082-187  Slide/Raft Assembly
60B50082-188  Slide/Raft Assembly
60B50082-189  Slide/Raft Assembly
60B50082-190  Slide/Raft Assembly
60B50082-191  Slide/Raft Assembly
60B50082-192  Slide/Raft Assembly
Aug 25/78  747-25-2425
5

### Page 9 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
Part Number  Nomenclature
60B50082-193  Slide/Raft Assembly
60B50082-194  Slide/Raft Assembly
60B50082-195  Slide/Raft Assembly
60B50082-196  Slide/Raft Assembly
60B50082-197  Slide/Raft Assembly
60B50082-198  Slide/Raft Assembly
60B50082-199  Slide/Raft Assembly
60B50082-200  Slide/Raft Assembly
60B50082-201  Slide/Raft Assembly
60B50082-202  Slide/Raft Assembly
60B50082-203  Slide/Raft Assembly
60B50082-204  Slide/Raft  Assembly
60B50082-205  Slide/Raft  Assembly
60B50082-206  Slide/Raft  Assembly
60B50082-213  Slide/Raft  Assembly
60B50082-214  Slide/Raft  Assembly
60B50082-215  Slide/Raft  Assembly
60B50082-216  Slide/Raft  Assembly
60B50082-217  Slide/Raft  Assembly
60B50082-218  Slide/Raft  Assembly
60B50082-219  Slide/Raft  Assembly
60B50082-220  Slide/Raft  Assembly
60B50082-239  Slide/Raft  Assembly
60B50082-240  Slide/Raft  Assembly
60B50082-241  Slide/Raft  Assembly
60B50082-242  Slide/Raft  Assembly
60B50082-243  Slide/Raft  Assembly
60B50082-244  Slide/Raft  Assembly
60B50082-245  Slide/Raft  Assembly
60B50082-246  Slide/Raft  Assembly
60B50082-247  Slide/Raft  Assembly
60B50082-248  Slide/Raft Assembly
60B50082-249  Slide/Raft Assembly
60B50082-250  Slide/Raft Assembly
60B50082-251  Slide/Raft Assembly
60B50082-252  Slide/Raft Assembly
60B50082-255  Slide/Raft Assembly
60B50082-256  Slide/Raft Assembly
60B50082-257  Slide/Raft Assembly
60B50082-258  Slide/Raft Assembly
60B50082-259  Slide/Raft Assembly
60B50082-260  Slide/Raft Assembly
Aug 25/78  747-25-2425

### Page 10 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
Part Number  Nomenclature
60B50082-261  Slide/Raft Assembly
60B50082-262  Slide/Raft Assembly
60B50082-263  Slide/Raft Assembly
60B50082-264  Slide/Raft Assembly
60B50082-265  Slide/Raft Assembly
60B50082-266  Slide/Raft Assembly
60B50082-267  Slide/Raft Assembly
60B50082-268  Slide/Raft Assembly
60B50082-271  Slide/Raft Assembly
60B50082-272  Slide/Raft Assembly
60B50082-273  Slide/Raft Assembly
60B50082-274  Slide/Raft Assembly
60B50082-275  Slide/Raft Assembly
60B50082-276  Slide/Raft Assembly
60B50082-277  Slide/Raft Assembly
60B50082-278  Slide/Raft Assembly
60B50082-279  Slide/Raft Assembly
60B50082-280  Slide/Raft Assembly
60B50082-281  Slide/Raft Assembly
60B50082-282  Slide/Raft Assembly
60B50082-283  Slide/Raft Assembly
60B50082-284  Slide/Raft Assembly
60B50082-285  Slide/Raft Assembly
60B50082-286  Slide/Raft Assembly
60850082-287  Slide/Raft Assembly
60B50082-288  Slide/Raft Assembly
60B50082-289  Slide/Raft Assembly
60B50082-290  Slide/Raft Assembly
Aug 25/78  747-25-2425

### Page 11 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
Reason
This modification is to reduce abrasion and punctures of
slide rafts from capnuts within the packboard, to provide
an improved structural attachment for the lower packboard
support brackets, and to provide an improved means of  addition, this modification is to provide a means for  retaining  determination of status of slide/raft inflation  packboard  latch hooks together.
system pressure vessels.
operator has recently reported finding several slide
ratts, on one recently delivered airplane, with small  to the fasteners which retain the  punctures in the inflatable material immediately adjacent  double hook packboard
of the slide raft inflatable  latch. The small punctures are believed to be the result  material contacting the
exposed  nuts on the inside of the packboard
used to install the double hook packboard latch.
slide/raft  addition, the operator reported several instances of  packboard fitting  inserts  loosening
breaking out of the fiberglass base.
Boeing has also received a report of one of the hooks on  the double hook latch separating  resulting  in only one
hook actually latching and carrying the load.
Numerous reports of false indications of low pressure in
the pressure vessel have been received from four
operators.  for operation of the low pressure warning light have been  Gauges containing a remote indicating switch
susceptible to corrosion. A means for direct viewing of
the pressure vessel pressure gauge has therefore been
developed.
Aug 25/78  747-25-2425-

### Page 12 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
C.  Description
To eliminate problems with the present remote warning
pressure gauge and to provide a packboard installation of
improved  design, the  operator may incorporate the
following design changes.
1. Replace cap nuts with an insert bar to protect slide
raft material from abrasion.
2.  Provide improved structural attachment for lower
packboard support brackets.
3 .  Install a new improved packboard latch.
4 .  Install cutouts in lower door lining and packboard to
permit direct viewing of pressure vessel pressure
gauge.
Because each of the bulletins listed in the following
table requires unpacking of slide/raft assemblies, it is
suggested that all of the listed bulletins be accomplished
slide/raft assemblies. Cancurrent incorporation of Boeing  concurrently on commonly affected  airplanes
Service Bulletin 747-25-2425 and B.F. Goodrich Service
Bulltin 25-048 and 25-049 is required.
Aug 25/78  747-25-2425 -
9

### Page 13 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
TABLE I
Bulletins Affecting Slide/Raft Assemblies
Engineering
Change Memo  Boeing and B.F. Goodrich Service Bulletins
PRR 79091  Boeing Service Bulletin 747-25-2423,
Escape Slide-Slide/Raft Pressure Vessel
Actuator Replacementi
B.F. Goodrich Service Bulletin 25-045,
Replace Aluminum Actuator Assemblies
With Stainless Steel Actuator Assemblies
P/N 4A3036, 4A3037, 4A3038, and 4A3056"
PRR 75524-55  Boeing Service Bulletin 25-2425,
and 75524-56  Slide/Raft Packboard Improvements
and Pressure Vessel Viewing Provisionsi
B.F. Goodrich Service Bulletin 25-048,
Replace Remote Indiating Pressure
Gauge With Direct Viewing Gauge
on Escape Slide/Raft Assemblies Part
Number 7A1238, 7A1239, 7A1255, 7A1256,
B.F. Goodrich Service Bulletin 25-049,
"Replace Scuff Panel on Escape Slide/Raft
Assemblies P/N 7A1238, 7A1261"
No ECM  Boeing Service Bulletin 747-25-2429,
"Inspection of Slide/Raft Steel Pressure
Vessels"
B.F. Goodrich Service Bulletin 25-046,
'Inspection of Steel Reservoir Pressure
Vessels B.F. Goodrich P/N 4A3018"
Aug 25/78  747-25-2425
10

### Page 14 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
D.  Approval
The modification described herein has been approved by the
FAA Designated Engineering Representative at the Boeing
Commercial Airplane Company.
E.  Manpower
Approximately 20 man-hours are required to accomplish this
modification per door.
The  following breakdown of manpower  requirements is
suggested as a guide to assist operators in planning and
accomplishing this modification. This estimate is for
direct labor only and assumes an experienced crew.  It
does  not include setup, planning, familiarization, tool
acquisition, or lost time.  Thus, operators should factor
this  estimate as necessary based on their own experience.
TABLE II
Man-Hour Estimate Per Airplane
Operation  Crew Size  Man-Hours  Down-Time
Access  2  2
Rework  2  12  6
Replacement  2  2
TOTAL PER DOOR  20  10
See B.F. Goodrich Service Bulletins 25-048 and 25-249 for
approximate man-hours.
NOTE:  This operation may be accomplished concurrently
with Boeing Service Bulletins 747-25-2423 and
747-25-2429.
Aug 25/78  747-25-2425-
11

### Page 15 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
F.  Material - Price and Availability
The kits  obtained from Boeing within the terms and conditions  identified in Paragraphs II.A. and II.B. may be
and delivery data will be provided upon request.  defined  below.  After expiration of the quotation, price
The delivery  initial kits will be available. when source  limited and tooling or material availability is the pacing  receipt date of purchase order by the Spares Department  allocation,  based on operator's planned modification schedules.  customer purchase orders will  from the available quantities,  quotation  below indicates the date when  receive  capacity  based on
quantities are depleted, additional kits will be available  It is therefore requested that customer purchase orders  include planned dates of incorporation.  When initial
as indicated in the ROLT (Reorder Lead Time) column.
Initial
Kit Number  Description  Delivery  ROLT  Unit Price
63B12678-1  63B12678-2  63B12678-6  63B12678-5  Kit's  Kit, Top  Kit, Door  Kit, Door  Door  Sep 27/78 26 Wks.  Sep 27/78 26 Wks.  Sep 27/78 26 Wks.  Sep 27/78 26 Wks.  No Charge  No Charge  No Charge  No Charge
63B12678-7  Kit, Top  NO •  Sep 27/78 26 wks.  No Charge
Date_  August 25, 1978
period.  Quotations are subject to acceptance within 120 days from  date hereon. Any items which are offered at "No Charge"  The  of  prices quoted are subject to the terms and conditions  Boeing's standard purchase order  subject to  Prices quoted in United States Dollars.  charge  after expiration of the 120-day  acknowledgement.  Terms:
Net 30 days.
Address purchase orders and correspondence pertaining to
this quotation to Director of Spares, and refer to this
service bulletin number.
747-25-2425
Aug 25/78  12

### Page 16 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
G. Tooling - Price and Availability
None
H.  Weight and Balance
Change in Basic  Change in Basic
Applicability  Weight (Pounds)  Moment (Pound-Inches)
Basic  +2.5  +3.275
747-SP  +2.5  +3161
References
1.  Existing Data:
a•  Engineering Change Memo PRR 75524-55 and 75524-
b.  747 Maintenance Manual Subject 25-69-01
C.  747 Wiring Diagram Manual 25-66-11
2 .  New  revised data supplied  in  support of this
bulletin:
Drawing No.  Sheet  DCN  ADCN Title
63B12678  Kit, Slide/Raft Direct-
Viewing Pressure Gauge
2  A
65B65632  1  Kit, Slide/Raft Gauge Access
Door Instl., Lower Liner
3. Process Data:
Boeing Process Specifications that are listed on
drawings supplied in support of this bulletin are not
detailed in  this bulletin since they are common
practices which can be accomplished in accordance
with operator's normal procedures.
Aug 25/78  747-25-2425
13

### Page 17 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
J.  Publications Affected
The modification described herein affects the following
publications:
Publication  Chapter/Section
747 Maintenance Manual.  ......... 25-69
747 Overhaul Manual.  ........... 25-65
747 Wiring Diagram Manual.............. 25-66
747 Illustrated Parts Catalog.......... 25-69
Aug 25/78  147-25-2425

### Page 18 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
II.  Material Information
A.  Parts Required Per Airplane
The  following kit assemblies may be obtained from Boeing
as noted in Paragraph I.F.:
NOTE:  Top kit assembly is divided into sub kits for
convenience of installation.  Only one top kit
is required to modify each airplane.
63B12678 - KIT, DIRECT VIEW GAGE PACKBOARD, SLIDE/RAFT
-7  _ -1
Quantity  Part Number  Nomenclature
63B12678-1(*)  Kit, Slide/Raft Direct
View Pressure Gauge
Packboard (Basic Airplane)
63B12678-7(*)  Kit, Slide/Raft Direct
View Pressure Gauge
Packboard (747-SP Airplane)
6  63B12678-2(*)  Kit, Door No. 1, 2, and 4
Slide/Raft Direct View
Gauge Packboard
8  63B12678-5(*)  Kit, Door No. 1, 2, 3, and 4
Slide/Raft Direct View
Gauge Packboard
2  63B12678-6(*)  Kit, Door No. 5 Slide/
Raft Direct View Gauge
Packboard
(*)  See Table III for color code suffix.
See kit drawings supplied with this bulletin for complete
kit parts  lists and list of all operator furnished
materials.
Aug 25/78  747-25-2425
15

### Page 19 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
Parts Required to Modify Spares
Quantity  Part Number  Nomenclature
1  63B12678-2  Kit, Door (Basic Airplanes)
1  63B12678-5  Kit, Door (SP Airplanes)
1  63B12678-6  Kit, Door No. 5
(Basic Airplanes)
TABLE II1
Kit Color Code Identification
Customer  747-100, -200  747-SP
AF  63B12678-18
AI  63B12678-1A
AR  63B12678-1A
63B12678-1A
BA  63B12678-1A
BO  (RJ152)  63B12678-1B  63B12678-7A
CI  63B12678-1A
GN  63B1 2678-1B
I  R  63B12678-1A  63B12678-1A  63B12678-7A
KL  63B12678-1A
KU  63B12678-1A
LH  63B12678-1C
ME  PA  63B12678-1A  63B12678-7A
RB  63B12678-1A  63B12678-7A
RJ  63B12678-1A  63B12678-7A
SA  63B12678-1A
SK  63B12678-1A
sQ  SV  63B12678-1A  63B12678-7A
WD  63B12678-1A
C. Special Tools and Equipment Required
None
D.  Existing Parts Accountability
See kit drawings supplied with this bulletin for complete
disposition of all existing parts and assemblies.
Aug 25/78  747-25-2425  16

### Page 20 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
III. Accomplishment Instructions
NOTE:  The following  paragraphs outline the general
accomplishment  instructions  and detailed test
requirements.  The suggested sequence of operations
detailed  accomplishment  instructions
indicated by circle notes on the figures and drawings
supplied with this bulletin.
A.  Remove slide assembly from door and remove inflatable from
packboard (Ref: 747 Maintenance Manual Subject 25-69-01).
B. 63802678.  B. Rework door-packboard pivot bracket area per Drawing  63B12678, Sheet 2, View Al1-1, A8, and B8. Revise teflon  sheet 2, Vie
trim in  pivot bracket area per Sheet 2, View 1A5, 2A5,
1B8, and 2B8.
C.  Make  cutout in packboard per Drawing 63B12678, Sheet 2,
View B9.
D.  Install  latch channel  and stiffener bracket on
packboard per Drawing 63B12678, Sheet 1, View B8.
Install  new latch  top of packboard per Drawing
63B12678, Sheet 1, View C10.
Disconnect electrical connector from PRESS TO TEST panel
Figure  assembly. Remove panel assembly and remove  Install cover panel over opening in middle  wiring per
liner assembly per Drawing 63B12678, Sheet 2, View B9:
Enlarge pivot bracket hooks per Drawing 63B12678, Sheet 2,
View BlO.
Cut out opening in door lower liner and install liner
assembly per Drawing 65B65632, Sheet 1, View I.
Restore packboard,  confiquration (Ref: 747 Maintenance Manual Subiect 25-69-  slide  assembly and liners to normal
01).
Aug 25/78  747-25-2425.
17

### Page 21 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
TERMINAL
GROUND S  BOARD 2
PRESS-TO-TEST
INDICATION LIGHT
CONNECTOR 5
CLAMP
BACC10GE19
(TYPICAL)
CLAMP
BACC1ODK2
(TYPICAL)  PACKBOARD
CONNECTOR
TYPICAL LEFT SIDE
DOOR SHOWN
RIGHT SIDE DOOR
OPPOSITE
FIGURE 1.  DOOR WIRING DELETION
747-25-2425
Aug 25/78
18

### Page 22 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
WIRE BUNDLE D
GROUND 3
10+4  +LA1437-201
+LA1432-2047
TERMINAL
BOARD 2
+ALA1441-20244
+11LA1440-2074
M ( )  DM ( )  DM ( )  M ( )
PACKBOARD  PUSH TO
TEST IND
LT 5
DOOR NO. 1, 2, 3, 4  747 SP AIRPLANES
DOOR NO. 1, 2, 4, 5  747 BASIC AIRPLANES
REF: WIRE DIAGRAM 25-66-11
+7/7A DELETED WIRE
FIGURE 1. DOOR WIRING DELETION
Aug 25/78  747-25-2425
19

### Page 23 (OCR)

BOEING SERVICE BULLETIN NO. 747-25-2425
747-SP AIRPLANES
Door  W/B NO.  Terminal  Ground  Packboard  Panel
Stripe  Stud 3  Equip. No.  Equip. No.
1L  W2078  TB205  GD6 338-DC  M295  M910
2L  W2082  TB207  GD2233-DC  M296  M912
3L  W2092  TB209  GD6 430-DC  M455  M918
4L  W2086  TB211  GD1731-DC  M297  M913
IR  W2076  TB206  GD6 336-DC  M291  M903
2R  W2080  TB208  GD2231-DC  M292  M9 04
3R  W2094  TB210  GD6436-DC  M454  M916
4R  W2084  TB212  GD1757-DC  M293  M9 06
BASIC AIRPLANE
1L  W2078  TB205  GD6338-DC  M295  M910
2L  W2082  TB207  GD6 342-DC  M296  M912
4L  W2086  TB211  GD6 346-DC  M297  M913
5L  W2090  TB213  GD6 35 0-DC  M298  M914
1R  W2076  TB206  GD6 336-DC  M291  M903
2R  W2080  TB208  GD6340-DC  M292  M9 04
4R  W2084  TB212  GD6344-DC  M293  M9 06
5R  W2088  TB214  GD6348-DC  M294  M9 08
Aug 25/78  747-25-2425
20 -

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
